How to dirty flash lineage os 15..
I have flashed lineage os to partition b
Gapps and magisk to partition a
I want to update to latest version of lineage os
I have tried by flashing on partition b but shows system can not mount..
Then I tried on partition a, it was successful and rebooted but my gapps and magisk gone..
So, please can anyone help me out how to update with latest rom file without losing data..or dirty flash..
Related
Hi. I have OnePlus 2. I installed Lineage OS ROM using TWRP. However, 2 weeks ago my finger print scanner stopped working and I am unable to update any apps from the play store. I cleared cache also from the TWRP recovery.
I am unable to install latest version of Lineage OS either. Getting 'Error 7' when trying to flash the latest version of Lineage OS.
Now I want to remove TWRP and install Oxygen OS. How can I do that?
Thanks in advance.
Wipe everything except your internal storage and flash the stock firmware (full rom).The rom will replace twrp with stock recovery upon booting . @abhaykhanna
I was trying to install havoc os on my moto g5 plus, i rooted with magisk and unlocked the bootloader, and when i tried to flash the havoc rom it gave me error 255, i upgraded the twrp and when i rebooted to install the rom it gave me error 7
Then i tried to keep my stock rom and it just wont load, it tells me the password is correct when it loads but the data is corrupted and need to factory reset, but when i do that it just loads twrp
when i connect the phone to my pc it shows that the sd is normal but the internal storage only has the twrp folder which makes me believe i currently have no OS
please help me
You must be flashed wrong Ver of Havoc, Happened with me
Try to flash any other Custom Rom
Try some 32 bit android 7.1 ROM.. I suggest Resurrection Remix 5. I got error because twrp was not 64 bit.
mercvv said:
I was trying to install havoc os on my moto g5 plus, i rooted with magisk and unlocked the bootloader, and when i tried to flash the havoc rom it gave me error 255, i upgraded the twrp and when i rebooted to install the rom it gave me error 7
Then i tried to keep my stock rom and it just wont load, it tells me the password is correct when it loads but the data is corrupted and need to factory reset, but when i do that it just loads twrp
when i connect the phone to my pc it shows that the sd is normal but the internal storage only has the twrp folder which makes me believe i currently have no OS
please help me
Click to expand...
Click to collapse
First thing first Back up ur persist and efs....
Now download pixel experience Rom and clean flash it.
Hello together,
after 3 Days of reading and searching and testing solutions, I have to ask you if you can solve my problem.
I can't find the reason by myself, because I'm new with this topic. I want to install a Custom ROM on my Huawei P 8 Lite Alice from 2015, but everytime I flash any Custom ROM which should match, it ends in a bootloop (huawei logo, then logo custom rom, then huawei logo etc....).
My device:
Huawei P8 Lite ALE L21 from 2015 - Alice
Built number before start this "project": ALE-L21C432B634
Android 6
Emui 4.0.3
Bootloader unlocked with code generated by dc-unlocker
No Root
My prefered Custom ROM is Lineage OS 14.1 and I tried to flash it following the steps in this thread:
[url]https://forum.xda-developers.com/p8lite/development/rom-lineageos-14-1-p8-lite-t3824247[/URL]
1. step - Flash TWRP
First Problem was to install the TWRP 3.1.1 linked in this thread:
[url]https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180[/url][/URL]
To flash the TWRP image with adb caused no problem. When I boot into recovery, TWRP starts, but when I touch anything on the screen (like swipe to unlock) the System boots (With OS installed it boots the OS and without it stucks at huawei logo). Booting again into TWRP is no Problem.
I solved this problem with a TWRP image 3.1.0-1 from this forum:
[url]https://www.android-hilfe.de/forum/root-custom-roms-modding-fuer-huawei-p8-lite.2476/huawei-p8lite-neues-inoffizielles-twrp-3-1-0-1-von-surdu_petru-xda.826139.html[/URL]
The thread references on the same XDA thread mentioned above, but it is linked to another version of TWRP image. This Version 3.1.0-1 is working good.
2. step - flash EMUI 4.1
I flashed the EMUI Update B896 with TWRP. In the thread to the Lineage OS 14.1 mentioned above, it is described that you need this update. I used the linked .zip.
Steps:
1. Wipe Data, internal storage, system, Dalvik Cache, Cache (all except micro sd card).
2. Format Data
3. Reboot into TWRP
4. flash .zip from SD card
5. Wipe Davlik Cache and Cache
5. Reboot System
After that :
Android 6
Build number: ALE B896
EMUI: 4.1
The updated ROM works good.
3. Step - Flash Lineage OS 14.1
Steps:
1. Wipe Data, internal storage, system, Dalvik Cache, Cache (all except micro sd card).
2. Format Data
3. Reboot into TWRP
4. flash .zip from SD card
5. Wipe Davlik Cache and Cache
5. Reboot System
Result Boot Loop :victory:
Trouble shooting:
I tried to install different TWRP versions, but only the TWRP 3.1.0-1 works.
I useb adb sideload to flash the Lineage
I flashed the EMUI 4.03. I had before and than Lineage 14.1 (EMUI works, but Lineage doesn't)
I wiped dalvik cache and data, cache after flashing Lineage, to fix the bootloop
I flashed versions of Lineage OS 14.1 from different dates and different download websites
I flashed different Custom ROMS - all the same Problem except Lineage 13.0. Lineage 13.0 boots till it is ready to "preparing" apps and than boots again.
Now I don't know what do do and would be very thankful to get some new ideas to try or perhaps a solution
Thank you! :highfive:
The ROM needs Emui 4.1 B895/B896 update to be installed first
Then unlock bootloader, flash twrp then flash ROM
Thank you for your help. I'll try this. So I have to lock bootloader again first?
No. You flash the update with twrp
Go to step 6 in the first post on this thread
https://forum.xda-developers.com/p8lite/general/guide-unlock-bootloader-root-device-t3977067
Keran_3066 said:
No. You flash the update with twrp
Go to step 6 in the first post on this thread
https://forum.xda-developers.com/p8lite/general/guide-unlock-bootloader-root-device-t3977067
Click to expand...
Click to collapse
Maybe I described it not so good in my first post but I think I did it already exactly like that.
1. Unlock bootloader
2. Flash TWRP
3. Flash Emui 4.1 update B896 ( its working on my phone now)
4. Flash TWRP again
5. Flash Custom Rom ( evertime the result is a bootloop)
Or did I overlook anything?
Sorry I didn't read that part where you flashed emui 4.1
Lineage os 14.1 works for me.
Did you try Resurrection Remix OS
https://forum.xda-developers.com/p8lite/development/rom-t3606568
Keran_3066 said:
Sorry I didn't read that part where you flashed emui 4.1
Lineage os 14.1 works for me.
Did you try Resurrection Remix OS
https://forum.xda-developers.com/p8lite/development/rom-t3606568
Click to expand...
Click to collapse
Thank you very much, that you tried to help me Im happy about all suggestions.
Yes I tried RR and Paranoid, but its the same Problem. I'm wondering that the EMUI Roms which are not officially from Huawei work and any custom rom does not. Maybe there is a Problem with the structure of my system but I dont know anything about this stuff and how to find out the reason for my Problem:laugh:
Maybe you know a command for adb or android terminal app to check if everything is ok?
Jaba Wup said:
Maybe you know a command for adb or android terminal app to check if everything is ok?
Click to expand...
Click to collapse
I'm kinda out of ideas
Keran_3066 said:
I'm kinda out of ideas
Click to expand...
Click to collapse
I feel like you:laugh: thanks and have a nice evening:good:
Hello, since Lineage OS came officially to Redmi Note 7 a couple of days ago, I've decided to install it. I was previously on Pixel Experience so this was the first time I was installing the gapps as well.
The installation of Lineage OS went fine but everytime I try reboot into the system after the installation of gapps, the phone is always booting again into recovery.
How can I solve this?
Thanks for the attention ?
Edit: everytime I try to setup my account the ui/ android configuration crashes and I can´t setup my account. I am currently using the arm64 stock version for android 10 and Lineage OS 17.1
Which gapps? U mount system, vendor and data before? Or better mount all before. Flash your rom, boot the system, boot in the recovery and flash the gapps package.
joke19 said:
Which gapps? U mount system, vendor and data before? Or better mount all before. Flash your rom, boot the system, boot in the recovery and flash the gapps package.
Click to expand...
Click to collapse
It worked thanks! I was flashing the rom, flashing the stock gapps and then boot into the system.
joke19 said:
Which gapps? U mount system, vendor and data before? Or better mount all before. Flash your rom, boot the system, boot in the recovery and flash the gapps package.
Click to expand...
Click to collapse
Now I can boot up the system but when I try to steup my google account the whole thing crashes. It says "Setup Wizard has stopped working" . I am trying to install the arm64 stock version for android 10 and Lineage OS 17.1. Do you know what can I do to solve this problem?
nokuteshimo said:
Now I can boot up the system but when I try to steup my google account the whole thing crashes. It says "Setup Wizard has stopped working" . I am trying to install the arm64 stock version for android 10 and Lineage OS 17.1. Do you know what can I do to solve this problem?
Click to expand...
Click to collapse
Opengapps stock? Test another gapps builder like bitgapps or nikgapps.
joke19 said:
Opengapps stock? Test another gapps builder like bitgapps or nikgapps.
Click to expand...
Click to collapse
It worked with bitgapps. Thank you for the help!
Hello i have flashed the Lineage 18.1 with twrp.
but now i can not flash the 17.1 img
when i do, so it boots, then breakup and boot again in recovery
i still can flash 18.1 lineage again and works. but when i flash the 17.1 image, it reboots to recovery everytime
what can i do?
did you format data ?