Having problems with my N910G Model note 4's, i have 5 of the exact same model, yet 3 of them straight up refuse to boot with any sort of custom rom installed, they just get stuck on the samsung logo, my main N910G and a previous one i had both run Astra Dream UX S8 port just fine, but literally anything that isnt the stock rom wont work on the other 3 phones (4th one hasnt been tested yet)
I thought maybe it could be a locked bootloader, however i googled it an apparently none of the N910Gs are bootloader locked. roots work fine on all the models i've tested but i just cant figure out why none of them will get past the samsung logo after booting for the first time with custom roms installed. Am i doing something wrong?
(Here is how i usually install roms)
1. Root phone (Download mode, install CF Auto Root for the specified model)
2. Install TWRP
3. Put Rom on SD
4. Backup phone
5. Install Custom rom with mostly stock settings + Super user & sound mods
6. Reboot phone... nothing happens.
Related
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
I'm afraid I'm not familiar with Samsung devices, and because I purchased this from ebay, I don't know how to tell the exact state that the former user put it in (I expected they would return it to stock prior to selling).
It's currently a T-Mobile branded, SM-N900T, on 4.4.2, build is KOT49H, security software MDF v1.0 release 2. Kernel is 3.4.0-660648.
It is supposedly unlocked for carriers, though I have not attempted a SIM card use yet, until I can tell that what I have is a valid device and the IMEI is checked out.
Any thoughts on how to validate the IMEI, and sort out how to get my new phone up to date would be appreciated. As I stated, I expected the vendor would have returned it to stock, but that is clearly not the case, so I don't want to accidentally boot loop it by doing something I shouldn't. I have not owned a Samsung before, so I want to be careful on how it differs from my Nexus 7, Amaze 4g, and Droid X, as they're all obviously very different in the OS area.
Thank you for the help1
Download tbe stock 4.4.2 rom and use odin to install. Then you will get the OTA updates.
Sent from my SM-N900P using Tapatalk
There is no stock 5.1.1 for note 3, only cm12.1/ aosp. Latest is 5.0 and you can use odin to flash. Maybe it's rooted that's why you can't update.
bladebarrier said:
I just swapped from my Amaze 4g, to a used Note 3, and I'm a little lost as far as where I should start.
It says that it's on 4.4.2, and that I cannot update due to a modified system.
Basically, I would like to get updated to 5.1.1 (or as close as is official for the Note 3), and root it.
...
Thank you for the help1
Click to expand...
Click to collapse
Some apps to install from Play Store...
Phone INFO Samsung - this will tell you all about your phone and the firmware etc.
Root Checker Basic - tells you if you are rooted or not.
SuperSU - this is so valuable you should buy the Pro licence. Chainfire does some great work for our phones.
TWRP - I have the zip version on my extSDCard and an Odin version on PC in case I have to rebuild from a Stock firmware. CWN works OK but most ROM builds seem to be for TWRP I think and a backup from one will not work on the other.
I don't know your previous phone so you probably need Odin v3.09 - this sits on PC and lets you flash firmware to the phone. (connected by USB)
For which you need Samsung USB drivers so the PC will recognise the phone. Install on PC before connecting phone.
Then do some browsing and find the processes to root your phone and install the ROM you want. If you just want Stock and access to all your phone, you can root it after flashing the original v5.0 download (from Sammobile or similar site - note on Sammobile you need a free account to DL) and then install Custom recovery (if wanted - it WILL trip the Knox flag but that may not matter given it's 2nd hand and might already be tripped anyway)
Read, make SURE you understand what is being said BEFORE you do anything - ask if you don't.
Good luck...
N9005 Lollipop brick
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Thank you all for the info, especially the detailed info from Journyman16. I checked, and it is flagged as custom, which is fine, so I'm going to go ahead and try to return to mostly stock, update it, and root it.
Ok, everything went well. I had to do two attempts at rooting, but I think it's just one of those things where sometimes it doesn't restart into the process every time.
All seems good. I'm on 5.0, rooted, busyboxed, and smooth sailing.
Thank you all, again, for the tips. The Note 3 is running very well. Thank you to all of the devs that have made this process so refined. I've donated to you before, and did so again today. It's outstanding to have such well versed coders, on XDA, helping out the community.
mjmbirige said:
Hi All, just need a huge help here, a friend of mine has been using a N9005 which was auto restarting, she went online and downloaded this firmware...N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar.md5....2.5GB in size...and flashed it, but the phone is stuck in boot loop even after recovery wiping data and cache, the phone can boot into download mode but re flashing the firmware always fails.....is there a solution for this.....please help
Click to expand...
Click to collapse
You have never learned not to ask in others posts? What does your problem has to do with this topic at all?
When you need help. Just click on Q&A then Create a new thread. How hard is it?
I installed TWRP bootloader onto my OEM Unlocked Samsung Galaxy Core Prime G360P Via Odin, and afterwords attempted to boot into Bootloader.
Upon doing so the phones screen goes black, and it acts like its turned off. My computer can't detect it with ADB, and I can't boot it back on without removing the battery and then inserting it again, after which it boots normally.
So yes my phone is working, but I need to get the bootloader working, I don't even have the normal android one right now because of this odd bug, i have rooted phones and tablets before both via Kingroot, and ADB depending on the needs of the device, and have some slight experience with it but limited technical knowledge, i have found seemingly similar problems but all said to solve via ADB, which doesnt really work as my ADB cant detect my phone when it is in this dead state it goes into instead of bootloader.
I would like a fix that will allow me to have TWRP installed, nothing that requires root as i have attempted all one-click rooters and none work for my phone, and i cannot install a custom OS as I am on textnow wireless and getting it to work with one is the biggest pain on earth (plus my calling would become sh^te without the custom textnow rom calling)
So basically i need to fix the bootloader without installing a new OS altogether, without deleting any of my inbuilt apps, and without factory resetting as I cant get to the bootloader to factory reset anyway, honestly i just need a way to get TWRP to work. If the answer involves another way of rooting my phone via Odin (yes i can still get to the odin downloader) and then running a root requiring app to fix my recovery thats fine but i dont know how to do that or what it would entail
im using: twrp-3.0.2-0-cprimeltemtr
Textnow wireless uses a custom os that is slightly modified from the default, I don't know what that entails but i know that affects what fixes may/may not work so i am mentioning it
before i get the same answers i have tried:
redownloading TWRP and flashing the new copy instead in case of corrupted image
removing the battery after flashing and then booting directly into bootloader so as to stop it restoring anything
I have tried flashing other recoverys, however upon doing so found that when i tried to boot into the bootloader it would then boot to Odin instead and give me an error saying it was unable to boot normally, so i reflashed the TWRP one and it gave me the same blackscreen once again.
Any advice would be very helpfull, im at my wits end and id like to be able to recover my phone should it have problems later, id much prefer i not get stuck
Software Version: G360PVPS2APE2
Hardware Version: G360P .03
Model #:SM-G360P
Android Version : 4.4.4
Android Security Patch Level: 2016-06-01
Kernel Version:2.10.28-675169
Build #: TNG360PVPS2APE2
SOLVED
http://forum.xda-developers.com/gal...ime-sm-g360p-root-t3217885/page2#post70113291
I found something that worked highly reccomend this autoinstaller for Odin
Search the forums for stock rooted deodexed sm-g360p, thats the TWRP that I use ... almost to much. The rom is also alot more susceptible to root,mods,and tweaks. The rom is sprint, boosts a sprint partner. Its helped me get the 4glte i couldnt pickup with the boost. But definitely find that post. Twrp isn't official to our variant(that i know yet) but it works the same tho a lil dated.
Hello all,
I recently discovered that my S5 was only running KitKat despite Marshmallow having been released for it. I checked for OTA updates and it found nothing, so I decided to flash a custom 6.0 ROM onto it (and for some reason I ended up deciding not to make a backup of the phone beforehand, the ultimate mistake).
The problem became that it didn't recognize Tracfone for my service provider and wouldn't connect to the mobile network. I then downgraded it to a 5.0 ROM, and it no longer even recognized the SIM card, saying there was none.
So I tried to flash the original stock ROM a few times, but every time either got errors from ODIN, the phone itself, or the TWRP bootloader.
Long story short, I seem to have screwed up multiple times trying to install a ROM to get around KitKat and now my phone appears to be softbricked. I can get into the TWRP menu and the "download" mode, but when trying to start the phone, it sits on the "Samsung Galaxy S5" screen with the "Set Warrenty Bit : kernel" text at the top left.
I'm just wondering if there's a way to fix it at this point, or if I've completely trashed the phone.
If anybody has suggestions or experience with this, all help is welcome!
Thanks!
MevNav said:
Hello all,
I recently discovered that my S5 was only running KitKat despite Marshmallow having been released for it. I checked for OTA updates and it found nothing, so I decided to flash a custom 6.0 ROM onto it (and for some reason I ended up deciding not to make a backup of the phone beforehand, the ultimate mistake).
The problem became that it didn't recognize Tracfone for my service provider and wouldn't connect to the mobile network. I then downgraded it to a 5.0 ROM, and it no longer even recognized the SIM card, saying there was none.
So I tried to flash the original stock ROM a few times, but every time either got errors from ODIN, the phone itself, or the TWRP bootloader.
Long story short, I seem to have screwed up multiple times trying to install a ROM to get around KitKat and now my phone appears to be softbricked. I can get into the TWRP menu and the "download" mode, but when trying to start the phone, it sits on the "Samsung Galaxy S5" screen with the "Set Warrenty Bit : kernel" text at the top left.
I'm just wondering if there's a way to fix it at this point, or if I've completely trashed the phone.
If anybody has suggestions or experience with this, all help is welcome!
Thanks!
Click to expand...
Click to collapse
Are you sure you have the stock firmware for the 902l and not the 903vl? The reason you didn't get the update for 6.0 is you have the 902l model. If you had the 903vl model you'd have 6.0. Straight talk never released it for the 902l model. No idea why being both models are very similar. Im not sure but if you make it back to stock on kitkat. I think you can use safestrap from the Verizon s5 to use some custom roms that run kitkat. If your bootloader is in fact unlocked and you can install a custom recovery other then safestrap. I believe you can install pretty much anything but I'm pretty sure straight talk ships the phones with the Toshiba chip so the bootloader isn't unlockable
I'm trying to flash roms on my N9005 but I'm not able to succeed.
I tried first flashing the Fougat rom, I got stuck at Galaxy note 3 bootloop
I tried the Lineage 15 rom. It required TWRP v3.2.1, tried flashing it, but it didn't load
Tried flashing MagMa NXTeam's rom, same with fougat.
Im sure %100 I followed devs steps to flash but nothing is working for me!
Help devs, please!!
Did you confirm the model # in download mode?
Did you try flashing other ROMs that work with an older version of TWRP?
The phone is running the latest bootloader and modem?
1 Its not a N9005 or a fake .
2 User flashing stuff not for a N9005 .
3 Possible damage to a partition .
Judged by previous multiple users posts its likely partition damage .
https://forum.xda-developers.com/search.php?searchid=446754566
same for me since i change complete screen LCD+tactil.
Original rom work great but no custom rom. I bought complete screen on china ebay store.
Is screen version is really same that mine ? how to verify ?
I've read through a couple of your posts you've made on several ROMs and even TWRP, it sounds like you are flashing the wrong version for your phone. In several instances you've asked whether to install hlte, in the TWRP thread it seems like you're just letting the phone reboot (which re-installs stock recovery). You might either want to research more into what you are doing before you brick/damage your phone or leave your phone on stock.
Hi,
the other day a friend gave me her old Samsung tab 4 7.0 (SM-T235). It's in its default state, running Android 5.1.1 stock ROM with all the most recent (5 year old) updates. "KNOX" appears to be ok, afaik.
This is my first Samsung device, up to the date I had experience with HTC Desire, Sony Xperia (2x) and OnePlus devices. I unlocked / rooted and installed custom ROMs on all of them.
Done quite a bit of googling and playing around with my "new" Samsung to see where it's different compared to my other devices. But there still are some blank spots, and there doesn't seem to be too much information out there regarding that specific tab 4 device. Before I start messing around I'd love to have some input from experienced Samsung users in regards to custom recoveries and ROMs, and possibly rooting. If there are comprehensive guides etc. out there that I simply didn't find don't hesitate to give me some hints:
First of all it appears to me that this device is going under the codename "degas". Correct? (meanwhile confirmed)
I hooked up the device to my PC, made sure that adb found it alright, then called "adb reboot recovery". That worked nicely, got me into Samsung recovery
Next I again tried to connect through ADB to the device still being in recovery, but that didn't work. To be expected?
Still in recovery I chose the "boot to bootloader" option, but that got me back into system instead.
So from system I again connected to adb then called "adb reboot bootloader". Device booted alright, but again it just rebooted into system.
>> Is there really no way to get into bootloader?
Trying to find out what has to be done in order to flash a custom ROM (rooted or not): from what I get, and unlike my other devices, I do not have to unlock the device / bootloader to begin with. It looks as if it was sufficient to boot into what they call "download mode", then hook up the device to my PC where ODIN is waiting already. Following this thread (and others) it then is sufficient to just flash TWRP from ODIN, boot to recovery and then do what is usually done here (like flash custom ROM, flash Gapps and possibly Magisk etc.). Is there something else / important I should know / observe?
Speaking about TWRP and Custom ROMs: TWRP.me lists that device on their site. So has anyone here flashed latest TWRP (3.6.2_x)? Or should I rather start with an older version like the one listed here, then possibly upgrade from there?
In regards to Custom ROMs I basically just found this LOS 16 thread (which is the same linked in the previous "TWRP" bullet). I assume that's it, or does anyone know about a newer android version (which I didn't find so far)? There seems to be lots of activity around "matisse" and "millet", but apparently those aren't the right devices, right?
Back to recovery: I see that in stock recovery there is an option to "wipe data/factory reset": should I do that before flashing TWRP from ODIN, or is it sufficient to wipe everything once I booted into TWRP?
I'm aware that I'll lose "Knox" as soon as I flash a different ROM / Recovery. As I don't want to use the tab 4 in some critical "BYOD" area I don't care (neither do I care about warranty, that's long gone anyways). But just to be sure: is it true that I'll lose "Knox" access?
In case I would decide to "go back" to stock ROM one day, how would I proceed then? Would ODIN still work so that I can flash latest stock ROM? Would Knox then be restored, or is that a thing of the past once I leave the stock ROM path?
Again: if you think I've done a bad job searching for answers don't hesitate to let me know but please be so kind then to hint the phrases I should look for ("SM-T235" really doesn't bring up that much valuable info)
Thanks and cheers
Update 2022-08-03: meanwhile I realized that the device is connected to my PC through generic drivers. Would it help to install specific Samsung drivers although both ADB and ODIN are acknowledging the device? Or can I just neglect that?
Since no answers came in I dared to just try. Meanwhile I'm running the device on LOS 16 with TWRP 3.5.2_9. Then flashed MindTheGapps (arm/Android 9 flavour)The switch wasn't as easy as I expected for some reason not obvious to me (somehow I couldn't get into TWRP after flashing it through ODIN. Then after the ~25th attempt it suddenly worked). Meanwhile I installed the official Samsung drivers, and maybe that helped, in combination with other adjustments I lost trace of...
I'll answer some of the above questions, for anyone who's interested:
#3: while in recovery (TWRP 3.5.2, as it is now) I still cannot access the device through adb. But I have access from windows' file explorer, so at least I can exchange files while being in recovery. Strange thing, this is the only one of my devices that behaves this way. The other day I'll try again from a Linux machine. maybe that works...
#4/5/6: boot to bootloader still doesn't work no matter what I try - devices always boots back into system
#7: Once I managed to get into TWRP the rest was a breeze
#8: I tried TWRP 3.6.0_9-0 which worked but on every boot into recovery it shows first a red notice that recovery was not enforcing SEAndroid. The notice then turns into blue and a second later TWRP logo shows up. This dowsn't happen with TWRP 3.5.2_9, so I stay there for the time being. Then I felt lucky and installed TWRP 3.6.2_9 image from running TWRP recovery, then rebooted. That again showed the red "not enforcing" message - and got stuck there. Solution was to get back into "Download mode" then re-flash TWRP 3.5.2 through ODIN.
Conclusion TWRP 3.6.2 is not fit to be used on that device (no, I didn't try 3.6.1...)
#9: since there aren't any more security updates released by google for A9 ROMs it would really be great to be able to upgrade to an A10 or even A11 ROM... anyone ever tried to use a "matisse" or "millet" ROM?
#10: I decided to use that - wiping everything that was on the device then doing a factory reset as well before flashing LOS 16. Then after first boot into LOS 16 a strange thing happened: when I made a basic setting (in regards to location services" the device told me that in a previous version I had decided to NOT allow google to use those services: after all that wiping and factory resetting: how could the device know that? By that time I had not yet logged myself into Google. Very mysterious!
#11/12: I guess I know the answer: I'm out of "Knox" now once and forever. And apparently ODIN is still working and recognizing the device.
Cheers!