Database Users

[STOCK][FIRMWARE] Alcatel OneTouch Idol 3 - All Variants

Hi everybody,
The Idol 3 community defenitly lack developper supports. How can developpement begin without stock dumps and ramdisk ?
We have he very great index made by @DallasCZ here.
To make a dump, all we need is an uploaded TWRP Backup of your firmware. Here is what I got so far
6045Y - Android 5.0.2 - LRX22G
6045Y_05_LRX22G.tar.xz
6045Y_05_LRX22G_RAMDISK.tar.xz
6045Y_06_LRX22G.tar.xz
6045Y_06_LRX22G_RAMDISK.tar.xz
I hope that some of you will help me complete this thread with the other firmwares, for the other variants...
Cheers

Why don't you use the thread that's already been done?
http://forum.xda-developers.com/idol-3/general/want-to-able-to-install-ota-updates-t3163745

famewolf said:
Why don't you use the thread that's already been done?
http://forum.xda-developers.com/idol-3/general/want-to-able-to-install-ota-updates-t3163745
Click to expand...
Click to collapse
Errrr... Because it has nothing to do with it? [emoji14]
Here it's about firmware dump not version tracking
Edit : sorry I didn't saw it, are this firmwares unpacked in flashable zips?

h2o64 said:
Errrr... Because it has nothing to do with it? [emoji14]
Here it's about firmware dump not version tracking
Edit : sorry I didn't saw it, are this firmwares unpacked in flashable zips?
Click to expand...
Click to collapse
They are full Time datestamp directory TWRP backups zipped up with system image and in all the most recent also boot. ie /sdcard/TWRP/BACKUPS/<someid>/This level zipped.

famewolf said:
They are full Time datestamp directory TWRP backups zipped up with system image and in all the most recent also boot. ie /sdcard/TWRP/BACKUPS/<someid>/This level zipped.
Click to expand...
Click to collapse
But I mean, it's not flashable zips like a stock rom flashable zip with deodex

h2o64 said:
But I mean, it's not flashable zips like a stock rom flashable zip with deodex
Click to expand...
Click to collapse
As the directions in the thread indicate and as I have stated, they are TWRP backups from each of the models which is what you ASKED for in post #1. No they are not flashable zip's because alcatel has never released any flashable zips that were not just a bunch of patches.

famewolf said:
As the directions in the thread indicate and as I have stated, they are TWRP backups from each of the models which is what you ASKED for in post #1. No they are not flashable zip's because alcatel has never released any flashable zips that were not just a bunch of patches.
Click to expand...
Click to collapse
Yeah but... That's why the community is made for. Make flashable zips from it, with pre-built gapps, updated Alcatel apps, deodex firmware, source built kernel...
And that's also why this thread is made for.

@h2o64: can you post stock recovery(s) to ? it could be usefull.

Idol 3 6039K stock firmware
The thread that framewolf is referring to seems to be intended only for the Idol3 5.5" (6045 models).
I made a TWRP backup of the Idol3 4.7" 6039K (Dual Sim) stock firmware version 5.0.2-01006. The TWRP backup was made using TWRP image from this thread.
The backup contains Boot + System Image, and can be downloaded from here: Idol347_6039K_TWRP_5.0.2-01006_STOCK.7z.

here backup from twrp, boot + system image, from alcatel idol 3 6039h (single sim), android version 5.0.2-010 06
Code:
http://pc.cd/CTartalK

I need a stock rom or back up from TWRP for 6039y.

I didn't get this thread... famewolf allready started same thread. And we can't get stock firmware untill Alcatel release one. Till then we only have TWRP backups.

DallasCZ said:
I didn't get this thread... famewolf allready started same thread. And we can't get stock firmware untill Alcatel release one. Till then we only have TWRP backups.
Click to expand...
Click to collapse
Then. Could a mod please see this and close?

wiemar said:
here backup from twrp, boot + system image, from alcatel idol 3 6039h (single sim), android version 5.0.2-010 06
This will work on my Alcatel 6039 y? I am from Bulgaria.
Click to expand...
Click to collapse

i think yes because "y" is europe version. im from Poland.
first you need make your backup from twrp

Thanks for help.Now will try it.Its working,but have small bugs.I test it a few days.

Still looking for backup from TWRP for 6039y.

still needs?
Gravedigger730818 said:
Still looking for backup from TWRP for 6039y.
Click to expand...
Click to collapse
still needs?

Yes,still needs stock rom or beck up from TWRP.Thenks!

Gravedigger730818 said:
Yes, still need stock rom or back up from TWRP. Thanks!
Click to expand...
Click to collapse
If you want to revert to Stock ROM for your 6039Y you can use the program "Mobile Upgrade Q". This is software released by TCL (the manufacturer of Alcatel phones). This software wipes the internal memory of your phone and downloads and installs the latest stock firmware including stock recovery.
Latest version of Mobile Upgrade Q is 4.9.2. Download link can be found here: http://forum.xda-developers.com/idol-3/general/idol-3-mobile-upgrade-app-download-t3182517
Notes:
1) Mobile Upgrade Q completely wipes the internal memory of your phone (including internal SD-Card called sdcard0). After using this program your phone is reset to factory default settings (as bought new in the box) and you need to set it up from scratch. So before using this program make a backup of information / files you want to keep.
2) Downloading the stock firmware from the server can take a long time, because the server that is used by TCL has only limited bandwidth. Last time that I used this program the download speed was only something like 20kB/s and it took more than 6 hours before the firmware was downloaded.
EDIT: See this thread for instructions how to use Mobile Upgrade Q.

Convert to ZUI 2.0

Hi,
I saw the chinese threads regarding ZUI 2.0 and it was really confusing to understand what to download, what tool to use.
The existing threads are outdated or contain the rom.
I want the details to specifically install official ZUI 2.0 with download links and the QPST tool process. I am currently running CM 13.1 with TWRP Recovery.
Thank you.

SarthakSL said:
Hi,
I saw the chinese threads regarding ZUI 2.0 and it was really confusing to understand what to download, what tool to use.
The existing threads are outdated or contain the rom.
I want the details to specifically install official ZUI 2.0 with download links and the QPST tool process. I am currently running CM 13.1 with TWRP Recovery.
Thank you.
Click to expand...
Click to collapse
Read the thread again from page 1 to thread end. The process is there. You can also find twrp flashable rom.
https://yadi.sk/d/2lyZj4qitJzyg
This is the link which can be flashed with TWRP.

Does OTA work?
sai.suri1983 said:
Read the thread again from page 1 to thread end. The process is there. You can also find twrp flashable rom.
https://yadi.sk/d/2lyZj4qitJzyg
This is the link which can be flashed with TWRP.
Click to expand...
Click to collapse
If this is a pre rooted rom, I will just have to wait for the new pre rooted version to be released before flashing right?

Hello There!
Hey Bro,
I have tried this on my ZUK Z1 earlier. (ZUI 2.0.80 ST) Via TWRP it flashed properly works fine but when i'm trying to restore my CM13 Backup it always gave me error. And i have to format the data partition as well and install CM13 all over again always i have tried 2-3 times every time everything gone. Do you have any solution. I want to use ZUI 2.0 but i come back often to CM13 as well.
Thanks in advance!
sai.suri1983 said:
Read the thread again from page 1 to thread end. The process is there. You can also find twrp flashable rom.
https://yadi.sk/d/2lyZj4qitJzyg
This is the link which can be flashed with TWRP.
Click to expand...
Click to collapse

Yes you are right. OTA didn't work. I have already tried. OTA failed with no network error. Try to download 2.1.049 from Chinese forum and search how to root. Kingroot is not safe for rooting I think. I red some were. But didn't search more about it.

nil.d said:
Hey Bro,
I have tried this on my ZUK Z1 earlier. (ZUI 2.0.80 ST) Via TWRP it flashed properly works fine but when i'm trying to restore my CM13 Backup it always gave me error. And i have to format the data partition as well and install CM13 all over again always i have tried 2-3 times every time everything gone. Do you have any solution. I want to use ZUI 2.0 but i come back often to CM13 as well.
Thanks in advance!
Click to expand...
Click to collapse
@nil.d
ZUI and CM both are different. So I don't think that restoring data from CM to ZUI or from ZUI to CM will work. I flashed ZUI 2.0 and tried to restore apps with Titanium Backup. But it didn't work.
For me few issues with ZUI. Can't sync Google contacts, and Titanium Backup didn't work. I am using CM13 now.

[HELP THREAD] Ask any questions [NOOB FRIENDLY]

Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!​
Hit Thanks if I Helped You!
Regards,
PoseidonKing

Can you provide instruction on how to disassemble the phone. Also where to order spares from. The digitiser on my Storm is cracked and Wileyfox want to charge me the price of a new phone to replace it.

JonnyTech said:
Can you provide instruction on how to disassemble the phone. Also where to order spares from. The digitiser on my Storm is cracked and Wileyfox want to charge me the price of a new phone to replace it.
Click to expand...
Click to collapse
Eh, sorry mate, I don't know how to disassemble the device and no one else sure as hell knows how to do it (at least on other websites). There are only reviews and unboxing experiences of the Wileyfox Storm and guides on how to flash ROMs, root and recoveries, etc. But some member will help you out, surely! If nobody seems to be knowing the issue, pm a forum moderator so that he/she can guide you to some links/methods. :fingers-crossed: Best of Luck!
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing

Downgrade from Nougat to COS 13.1.5-ZNH2KAS7EC-kipper
Hello everybody
I need some help with my Wileyfox Storm. Yesterday it become an OTA update and my old Original COS13 is away and i have now Android Nougat 7.1.1. Stock Rom.
I will undo this, and i don't know how to start. I need a noob friendly Thread to do this.
I hope somebody can help me.
Grettings from Germany
Sorry for the poor English

Downgrade to android 6.0 marshmallow
Hello everyone, well recently my phone updated to android 7.1.1 and I didn´t like very much, so could help me and tell me if is there a way to go back to android marshmallow 6.0, just like it came when I bought it. Is it possible and does anyone know how to do it?

Okay so im trying to get lineage Os on my phone, this OS isn't working at all i get in bootloops etc. So i tried AOSP extended and i managed to get this working. But when i try to install gapps or try to flash Super su or magisk it returns error 1. The problem is in the recovery probably. So i tried to flash / boot a different TWRP version but all of the other versions give me this error: FAILED (remote: dtb not found). I would appreciate any help i can get i am hardstuck because i cant get a proper working TWRP recovery working and the only rom i am able to flash is AOX but without gapps that isnt worth much.
Thanks in advance.

Infiniterum said:
Okay so im trying to get lineage Os on my phone, this OS isn't working at all i get in bootloops etc.
Click to expand...
Click to collapse
First of all, what build of LineageOS are you trying to install??? If it is dated 12.07.2017 or 05.07.2017 - it won't work at all. That builds are broken. Use 28.06 or 21.06 build.
Secondly, what TWRP version do you use? I installed LOS via TWRP 3.1.0.0.
Newer version is available now.
And what bootloader version do you have on your Storm. I mean what stock ROM was installed before installing TWRP.
Infiniterum said:
So i tried AOSP extended and i managed to get this working. But when i try to install gapps or try to flash Super su or magisk it returns error 1.
Click to expand...
Click to collapse
It seems to me, AEX is pre-rooted and comes with magisk pre-installed. When I installed that - only gapps were necessary.
Gapps need to be installed immediately after installing ROM, without any reboot.

~FNWL~ said:
First of all, what build of LineageOS are you trying to install??? If it is dated 12.07.2017 or 05.07.2017 - it won't work at all. That builds are broken. Use 28.06 or 21.06 build.
Secondly, what TWRP version do you use? I installed LOS via TWRP 3.1.0.0.
Newer version is available now.
And what bootloader version do you have on your Storm. I mean what stock ROM was installed before installing TWRP.
It seems to me, AEX is pre-rooted and comes with magisk pre-installed. When I installed that - only gapps were necessary.
Gapps need to be installed immediately after installing ROM, without any reboot.
Click to expand...
Click to collapse
I was using 05/07 build so that explains that. Im using TWRP 3.0.3.0 Kipper, but i can't find newe TWRP builds for the wileyfox storm, if you could give me some links that would be great. Stock rom was android 7.1 i believe and bootloader version is 'kipper-N-g2253387'. When i installed AEX via my (probably corrupt) TWRP recovery it says it also flashed Magisk but once the phone starts and i go to the magisk app it says im unrooted and so does rootchecker say. I think my biggest problem is with the TWRP recovery. If you could get me the download links of the versions your using that would be great.

Here you can get TWRP
https://www.androidfilehost.com/?w=files&flid=189519
Thanks to kligli from 4pda
Maybe the bootloader from 7.1-wileyfox is not compatible with Lineage OS.
Before flashing TWRP and LOS, I rolled back to COS 13.1.5 official Wileyfox ROM via fastboot. So I don't really know whether it is compatible or not.

~FNWL~ said:
Here you can get TWRP
https://www.androidfilehost.com/?w=files&flid=189519
Thanks to kligli from 4pda
Maybe the bootloader from 7.1-wileyfox is not compatible with Lineage OS.
Before flashing TWRP and LOS, I rolled back to COS 13.1.5 official Wileyfox ROM via fastboot. So I don't really know whether it is compatible or not.
Click to expand...
Click to collapse
So i flashed the twrp 3.1 and that works, it installs gapps now and no error with lineage OS, im gonna boot phone soon hopefully lineage will start to, i didnt know what gapps to flash but i tried the arm64 because i read it somewhere. But isn't the Storm ARM?

Use ARM64 - 7.1 - nano or pico GApps. Lineage official site said it works even without any GApps, but I have not tried that.

So I just bought a wileyfox storm few days ago and am on 7.1.1 what is the rooting method thanks.
---------- Post added at 02:46 AM ---------- Previous post was at 02:26 AM ----------
Also a just went into the bootloader and status is unlocked but I never unlocked the bootloader yet any ideas on this??

Hi Guys
Someone of you have audio problems on whatsapp ( with integrated and bt mic ) when recording audio? ( noise and metallic audio recording )
I'm on Lineage 7.1.2 - 14.1-20180110-nightly but have same problems with previous rom

Need Help Rooting (solved)

Hello XDA,
I have been using Samsung phones all my life , Rooted (odin) a lotta phones installed countless custom roms and finally i thought its time for pure android experience . I bought a moto g4 plus from a friend of mine and have been going through the g4 + forum for 2 days now . I have not got the slightest of idea how you root / install custom rom on this device . Its so different from how you do it on a Samsung device so finally I have decided to ask for your help .
Info I would like to share :
1.The boot loader is locked
2.The device is a XT1643
3. 3 GB / 32 GB
4. December 1 , 2017 security patch
5. NPJS25.93-14-13
6. There was a OTA update when I received the phone which I didn't update
As mentioned earlier It looks like I am a complete noob when it comes to this device and I would need all the possible help I can get .
If anybody would be kind enough to guide me through this initial learning phase I will be very grateful and would even share my whisky ( which I usually don't do )
If you need any more information please ask
Thanks and Regards
DW

Drunken-warlord said:
Hello XDA,
I have been using Samsung phones all my life , Rooted (odin) a lotta phones installed countless custom roms and finally i thought its time for pure android experience . I bought a moto g4 plus from a friend of mine and have been going through the g4 + forum for 2 days now . I have not got the slightest of idea how you root / install custom rom on this device . Its so different from how you do it on a Samsung device so finally I have decided to ask for your help .
Info I would like to share :
1.The boot loader is locked
2.The device is a XT1643
3. 3 GB / 32 GB
4. December 1 , 2017 security patch
5. NPJS25.93-14-13
6. There was a OTA update when I received the phone which I didn't update
As mentioned earlier It looks like I am a complete noob when it comes to this device and I would need all the possible help I can get .
If anybody would be kind enough to guide me through this initial learning phase I will be very grateful and would even share my whisky ( which I usually don't do )
If you need any more information please ask
Thanks and Regards
DW
Click to expand...
Click to collapse
I'm sorry to reprimand you, but you really need to follow the rules here. It took me all of a few moments to find exactly what you're looking for simply by searching.
https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918
Don't hesitate to ask questions in the future, but only if you've exhausted all other avenues.

Ragarianok said:
I'm sorry to reprimand you, but you really need to follow the rules here. It took me all of a few moments to find exactly what you're looking for simply by searching.
https://forum.xda-developers.com/mo...de-root-moto-g4-plus-supersu-android-t3587918
Don't hesitate to ask questions in the future, but only if you've exhausted all other avenues.
Click to expand...
Click to collapse
Hello Mate
As mentioned above I have been searching the forum for almost 2 days before I thought of asking for help . I did go through the thread( that you have mentioned ) earlier today but it looks a bit old to me . The link on how to flash twrp comes back with a 404 error . The last few posts are helpful (as it deals with the same build) but again as am new to the particular device It would be helpful if someone could give me a noob friendly procedure . I am not here to break the rules just trying to learn without bricking my device
Thanks and Regards
DW

yeshwanthvshenoy said:
Flashing TWRP:
>>> Flashing TWRP or Rooting will void your warranty. Please ask anything before doing, if your not fully confident on what to be done. <<<
Get the TWRP image file from http://forum.xda-developers.com/mot...p-twrp-3-0-2-2-recovery-moto-g4-plus-t3386586
Next, get the adb and mfastboot from https://drive.google.com/file/d/0B5jlU9JnLAZGbVU0UzJ3N3p4X2M/view?usp=sharing
Unzip the file and place the image file inside the extracted folder.
Reboot to Bootloader (power off, then press the power and volume down buttons simultaneously).
Open a new command prompt or terminal window and do the following:
Code:
mfastboot flash recovery twrp_*version*_athene.img
Rooting Device:
>>> The old guide is outdated. Will be updated shortly. <<<
Click to expand...
Click to collapse
Drunken-warlord said:
Hello Mate
As mentioned above I have been searching the forum for almost 2 days before I thought of asking for help . I did go through the thread( that you have mentioned ) earlier today but it looks a bit old to me . The link on how to flash twrp comes back with a 404 error . The last few posts are helpful (as it deals with the same build) but again as am new to the particular device It would be helpful if someone could give me a noob friendly procedure . I am not here to break the rules just trying to learn without bricking my device
Thanks and Regards
DW
Click to expand...
Click to collapse
Sorry for being so short earlier. We have quite a few members here who constantly post issues without using the search function.
You can try to post I quoted above to flash TWRP. It's fairly straight forward.
Are you planning on flashing a Nougat ROM or are you going the adventurous route and flashing an Oreo ROM? The TWRP version mentioned in the quoted post should be fine for flashing Nougat and 32-bit based Oreo ROMs, but you'll need 64-bit TWRP for 64-bit Oreo ROMs.
Use this as a reference for 32-bit and 64-bit Oreo ROMs: https://forum.xda-developers.com/moto-g4-plus/how-to/oreo-roms-table-t3717226
64-bit TWRP: https://forum.xda-developers.com/mo...recovery-twrp-3-2-1-unofficial-touch-t3722206
Once you've flashed TWRP, you can either flash different versions through TWRP itself or through the Play Store app.
As far as ROMs, I'd recommend Official Lineage OS 14.1 for Nougat: https://forum.xda-developers.com/moto-g4-plus/development/rom-cyanogenmod-14-1-t3522101
And I'd recommend Official AICP 13.1 for Oreo: https://forum.xda-developers.com/mo...om-aicp-13-1-o-8-1-0-official-weekly-t3731269 (You'll need to download the 20180212 build since most recent builds either have a broken camera or won't boot.)
Any other questions, don't hesitate to ask.

Drunken-warlord said:
Hello Mate
As mentioned above I have been searching the forum for almost 2 days before I thought of asking for help . I did go through the thread( that you have mentioned ) earlier today but it looks a bit old to me . The link on how to flash twrp comes back with a 404 error . The last few posts are helpful (as it deals with the same build) but again as am new to the particular device It would be helpful if someone could give me a noob friendly procedure . I am not here to break the rules just trying to learn without bricking my device
Thanks and Regards
DW
Click to expand...
Click to collapse
Hello and welcome, Please have a look in each device forum for a newbie help thread https://forum.xda-developers.com/moto-g4-plus/help/help-thread-question-noob-friendly-t3526598 where you can ask questions that are repeatedly asked and where you'll be guided to the right threads to help you further :good:
This keeps the forum clean and everything at a glance so you'll be find easily topics

@Ragarianok
I am going to try the Oreo builds as I have never got a chance to try it on my previous devices so I guess I will be using a 64bit version of twrp.
This is what am planning to do :
1. Unlock the bootloader
2. Flash an official version of TWRP
2.a Take a backup
3. Flash a custom kernel through twrp
4. Flash Super Su / Magisk
5. Flash a 64 bit version of twrp using TWRP
6. Flash a custom ROM
Please correct me if I am wrong
Thanks a lot for the detailed guide
Thanks and Regards
DW

Drunken-warlord said:
@Ragarianok
I am going to try the Oreo builds as I have never got a chance to try it on my previous devices so I guess I will be using a 64bit version of twrp.
This is what am planning to do :
1. Unlock the bootloader
2. Flash an official version of TWRP
2.a Take a backup
3. Flash a custom kernel through twrp
4. Flash Super Su / Magisk
5. Flash a 64 bit version of twrp using TWRP
6. Flash a custom ROM
Please correct me if I am wrong
Thanks a lot for the detailed guide
Thanks and Regards
DW
Click to expand...
Click to collapse
If you want 64bit Oreo roms it's a little bit different
1. Unlock the bootloader
2. Flash a 64 bit version of twrp
2.a Take a backup and safe it off your phone
3. Flash a Oreo 64bit custom ROM
3.a flash gapps package arm64 (8.0 or 8.1 depending on rom version)
4. Flash magisk 15.3
If you want to root the stock nougat rom steps 1-4 of your list are correct.

Drunken-warlord said:
@Ragarianok
I am going to try the Oreo builds as I have never got a chance to try it on my previous devices so I guess I will be using a 64bit version of twrp.
This is what am planning to do :
1. Unlock the bootloader
2. Flash an official version of TWRP
2.a Take a backup
3. Flash a custom kernel through twrp
4. Flash Super Su / Magisk
5. Flash a 64 bit version of twrp using TWRP
6. Flash a custom ROM
Please correct me if I am wrong
Thanks a lot for the detailed guide
Thanks and Regards
DW
Click to expand...
Click to collapse
Not quite. You'll want to go in this order:
1. Unlock bootloader
2. Flash TWRP
3. Backup
4. Wipe (Wipe/Advanced Wipe; ART/Dalvik, System, Data, Cache)
5. Flash ROM
6. Flash Gapps
7. Reboot
8. Go through setup wizard and let everything settle for ~10 minutes
9. Boot into TWRP and flash SuperSU or Magisk (I would suggest Magisk), then flash kernel and reboot
You'll need to flash the unofficial 64-bit TWRP mentioned in my previous post to flash a 64-bit Oreo ROM, otherwise you'll get an error message when flashing ROM.
You'll also need to use unofficial Gapps since there aren't any official Gapps for 8.1 just yet. I'd recommend either mini or micro here: https://sourceforge.net/projects/unofficial-opengapps-8-1/files/arm64/20180225/
You should be able to flash the most recent Magisk located here: https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
If you do flash a custom kernel, I'd highly suggest Frostbitten: https://forum.xda-developers.com/mo...s-frostbitten-kernel-moto-g4-g4-plus-t3649155
@strongst
Just noticed that you posted a similar set of instructions and now I feel like a goober.

Ragarianok said:
Just noticed that you posted a similar set of instructions and now I feel like a goober.
Click to expand...
Click to collapse
What's a goober there are every time different ways users must decide which one to choose :laugh:

strongst said:
What's a goober there are every time different ways users must decide which one to choose :laugh:
Click to expand...
Click to collapse
In this context, it basically means I did something silly.

Ragarianok said:
In this context, it basically means I did something silly.
Click to expand...
Click to collapse
Nope you didn't

@strongst @Ragarianok
I am glad that I got the G4+. With amazing people like you on the forum it's guaranteed to be fun-filled learning experience
Thanks again for the support
Regards
DW

Drunken-warlord said:
@[email protected]
I am glad that I got the G4+. With amazing people like you on the forum it's guaranteed to be fun-filled learning experience
Thanks again for the support
Regards
DW
Click to expand...
Click to collapse
Thanks, you're welcome :good:

Ota ? ..... Was it jan security patch update ?

pang12345 said:
Ota ? ..... Was it jan security patch update ?
Click to expand...
Click to collapse
If it was an OTA update, it looks likely to be more the February 2018 security patch rather than the January 2018 patch.
Credit https://forum.xda-developers.com/moto-g4-plus/how-to/athene-security-patch-usa-february-t3745147

echo92 said:
If it was an OTA update, it looks likely to be more the February 2018 security patch rather than the January 2018 patch.
Credit https://forum.xda-developers.com/moto-g4-plus/how-to/athene-security-patch-usa-february-t3745147
Click to expand...
Click to collapse
The op was talking about xt1643 ,and this model is for india. And the link that you mentioned is for us model .

pang12345 said:
The op was talking about xt1643 ,and this model is for india. And the link that you mentioned is for us model .
Click to expand...
Click to collapse
That is true, however for our devices we have generally been issued the same security patch level regardless of region. It may be different builds for particular regions (e.g NPJS25.93-14-13 for India, Brazil and EU, and NPJ25.93-14.7-3 for US) but they are both the December 2017 security patch.
Regardless, we've still yet to see an OTA newer than December.

@strongst @Ragarianok @echo92
Evening ,
Thanks For all the support i finally rooted MY phone
But
I ran into a bit of a problem " Sim Cards Not Detecting "
This is What i did
1. Unlocked My bootloader
2. flashed twrp-3.1.1-athene_shreps
3. Took a backup of everything
4. flashed ElementalX-G4-2.00.zip
5. flashed Magisk 16.0
reboot : No sim cards detected
After which I flashed lineage-14.1-20180219-nightly-athene-signed.zip and the gapps provided
experienced the same error again .
uninstalled magisk and flashed the latest Super Su (V2.82) with no positive results
not sure what went wrong ...is there any way out of it ?

Drunken-warlord said:
@strongst @Ragarianok @echo92
Evening ,
Thanks For all the support i finally rooted MY phone
But
I ran into a bit of a problem " Sim Cards Not Detecting "
This is What i did
1. Unlocked My bootloader
2. flashed twrp-3.1.1-athene_shreps
3. Took a backup of everything
4. flashed ElementalX-G4-2.00.zip
5. flashed Magisk 16.0
reboot : No sim cards detected
After which I flashed lineage-14.1-20180219-nightly-athene-signed.zip and the gapps provided
experienced the same error again .
uninstalled magisk and flashed the latest Super Su (V2.82) with no positive results
not sure what went wrong ...is there any way out of it ?
Click to expand...
Click to collapse
First, I'm a little confused about the fact that you flashed that version of TWRP instead of the one located here: https://dl.twrp.me/athene/
Second, I've never had that happen when flashing, so I'm not really sure what to recommend. If I had to guess, I would say the best route would be to restore your backup and see if the SIM is detected.
I have found at least one thread with a similar issue; might be worth a look: https://forum.xda-developers.com/moto-g4-plus/how-to/fix-sim-card-issue-t3751679
Let us know what happens.

Ragarianok said:
First, I'm a little confused about the fact that you flashed that version of TWRP instead of the one located here: https://dl.twrp.me/athene/
Second, I've never had that happen when flashing, so I'm not really sure what to recommend. If I had to guess, I would say the best route would be to restore your backup and see if the SIM is detected.
I have found at least one thread with a similar issue; might be worth a look: https://forum.xda-developers.com/moto-g4-plus/how-to/fix-sim-card-issue-t3751679
Let us know what happens.
Click to expand...
Click to collapse
I went through that before posting my question .. the paper does not help .
Is it okey if I flash the twrp that you have mentioned over the existing twrp?
Thanks and regards
DW
Edit : I have restored my backup but still the same issue.
Edit : flashed the official TWRP . still the same results
EDIT : After 3 hours + Countless reboots the issue solved on its own ... I am not sure what really happened.. lol
Thanks for the Support
DW

Can you just downgrade OOS to Android 10 and then flash TWRP or is it impossible?

Hi, I recently bought an used OnePlus 8 Pro and it was already updated to Android 11. After repairing it, I discovered that it's not possible to run TWRP on this firmware version.
Couldn't I just go ahead and downgrade the OS in order to run TWRP on it or is it basically impossible like on the latest Samsung Galaxy S-series devices?
Would be glad if someone could answer me that question. I kinda tried to boot into twrp because I was too quick to read the thread but it just caused my device to run into Qualcomm Emegency Mode.

What do you need twrp for? If it's just to root and almost everything else... It can be done via other means.

sensui123 said:
What do you need twrp for? If it's just to root and almost everything else... It can be done via other means.
Click to expand...
Click to collapse
I also counter the same problem, i just want to use twrp to flash another rom. Do you have any solution? I have search the forum but i didnot find something useful.

freeman1007 said:
I also counter the same problem, i just want to use twrp to flash another rom. Do you have any solution? I have search the forum but i didnot find something useful.
Click to expand...
Click to collapse
Hmmmm the way I've seen a lot of custom roms... They're installed/flashed partition by partition in bootloader via fastboot.....I guess if you have to use twrp to flash the entire rom you do need to downgrade to os 10.

sensui123 said:
Hmmmm the way I've seen a lot of custom roms... They're installed/flashed partition by partition in bootloader via fastboot.....I guess if you have to use twrp to flash the entire rom you do need to downgrade to os 10.
Click to expand...
Click to collapse
Thank you for your response. i think i just did not catch up the latest progress. Would you please help me find the instruction about how to flash rom in the new way you mentioned ? thank you so much.
And i still have the same question , is it necessary for us to downgrade to android 10 and then start flashing rom.

Look at the roms in the subforum here:
OnePlus 8 Pro ROMs, Kernels, Recoveries, & Other
Improve your OnePlus 8 Pro 's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
I just looked at some popular ones like Pixel experience and Lineage and they're both flashed in this way. Look at the opening post where the instructions are... Seems like Pixel Experience there's a batch file that flashes the partitions but it's essentially done this way without twrp.

sensui123 said:
Look at the roms in the subforum here:
OnePlus 8 Pro ROMs, Kernels, Recoveries, & Other
Improve your OnePlus 8 Pro 's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
I just looked at some popular ones like Pixel experience and Lineage and they're both flashed in this way. Look at the opening post where the instructions are... Seems like Pixel Experience there's a batch file that flashes the partitions but it's essentially done this way without twrp.
Click to expand...
Click to collapse
thank you for your reply, I already tried to flash pixel experience, i followed the install guide but failed to flash its recovery file.
Install PixelExperience on instantnoodlep - PixelExperience Wiki
Install PixelExperience on instantnoodlep - PixelExperience Wiki
wiki.pixelexperience.org
Because it requires installing rom from recovery, so I get stuck here.
The problem is the device enters crash dump mode when switched to recovery mode. I guess the reason is that my p8pro is in andriod 11 before i flash recovery. now the device can enter android 11 normally but the recovery don't function. So I am here to ask is it necessary for me to downgrade to android 10 to solve the problem.

sensui123 said:
Look at the roms in the subforum here:
OnePlus 8 Pro ROMs, Kernels, Recoveries, & Other
Improve your OnePlus 8 Pro 's battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com
I just looked at some popular ones like Pixel experience and Lineage and they're both flashed in this way. Look at the opening post where the instructions are... Seems like Pixel Experience there's a batch file that flashes the partitions but it's essentially done this way without twrp.
Click to expand...
Click to collapse
Thank you for your reply, it help me a lot. i have already flash my device lineage os . Regarding the problem i mentioned in my last reply, it seems the install guide is for android 10. As for android 11 , i think it needs a payload dumper to extract all files and flash them one by one.

MichalPlays said:
Hi, I recently bought an used OnePlus 8 Pro and it was already updated to Android 11. After repairing it, I discovered that it's not possible to run TWRP on this firmware version.
Couldn't I just go ahead and downgrade the OS in order to run TWRP on it or is it basically impossible like on the latest Samsung Galaxy S-series devices?
Would be glad if someone could answer me that question. I kinda tried to boot into twrp because I was too quick to read the thread but it just caused my device to run into Qualcomm Emegency Mode.
Click to expand...
Click to collapse
I think the answer depends why do you need twrp. If you just want to flash a rom like me, you can find a custom rom supporting android 11,for example lineage os and you can flash all files it requires without twrp.
If you want to flash a android 10 rom or you just want to flash twrp , i don't know how, maybe you should downgrade.