Database Users

(CM7/MIUI) Screenstate, Governor and Threshold Control Script

Hi Folks,
For those who are interested, I have modified the 90screenstate_scaling script used in Zach's (and now Glitch's) kernel for use with other CM7 compatible kernels. The aim is to create a very simple script that can easily be read, modified and improved upon by non-coders, such as myself.
I have retained only the code that will read the screen state, set the governor appropriately and set the scaling threshold, giving users complete control over the scheduling behavior of their CM compatible kernel.
I am not a coder and all credit goes to FloHimself and zacharius.maladroit for the original content. all I have done is (hopefully) simplify the script and make it easy for non-specialists to read.
If you would like to try it out, copy the script in to /system/etc/init.d and modify the values to your liking. If you are already on Zach's kernel there is nothing new here, as you already have this script.
The script currently includes kernel defaults from Glitch for the smartass governor, from Zach for the conservative and ondemand governors, a few experimental settings, and of course, the ability to modify them yourself.
If you add anything or make any modifications (particularly in relation to your specific usage pattern) you would like to share, please post them and I will update this thread. If you make modifications, comment them appropriately and explain your usage pattern for which the settings work best so that people know if it would work for them.
The experimental conservative settings that I have made (that are currently in use on Glitch kernel) for the screen off state are designed to aggressively keep the frequency very low, almost like a 100mhz frequency cap, while still allowing them to scale up under considerable load. They are (hopefully) ideal for background screen off behaviour such as listening to music, exercise applications or aggressive sync and push/pull email behavior (like in an office).
The experimental smartass settings are designed to test the hypothesis that quick downscaling may cause as many lags as as slow scaling up behavior. The goal is to create a more linearly scaling version of smartass which is slower to upscale or downscale (only a matter of milliseconds difference). These are still under testing.
With one of the main reasons for using smartass as a single governor, the min/max frequencies for the screen on/off state no longer applicable with the governor changing in relation to the screen state, I have moved to ondemand settings, which may have battery implication while the screen is on, but they are VERY smooth.

*subscribes*
we could probably make conservative governor more aggressive
with the settings that laststufo used on his kernel but I'm not sure if it would scaled up fast enough if you used e.g. some DSP settings on sound while the screen is off
worth as shot
if I don't forget it - I'll post the settings later

Subscribes too
I like the idea and the simplicity of this. And with Zach's help, also known as "F*ckin scripts master" (almost a private joke ), it can only be great.

I'm a big fan of simple, though as a user of Arch Linux on the desktop I have no choice (BSD style init scripts a boot - beautiful simplicity)!
It's great you lads are watching this! Hopefully the thread will grow in to something, even if it is just an sandbox for users to experiment with the settings they prefer. If nothing else, hopefully you guys get some useful info!

I just added a bit of an experimental version that moves away from the default smartass values.
I am hypothesizing that the very accasional lags in the smartass governor might be related to the governor scaling down too fast, rather than it not scaling up fast enough.
I changed the default down threshold from 40 to 35 and the default up threshold from 60 to 65. Hopefully this will scale up and down a little more linearly and this will make the GUI even smoother. I am still testing this theory at the moment, but thought I might post it (on the first post) if anyone wanted to have a go.

well.heeled.man,
you need to test your conservative settings while the screen is on
they're way too aggressive (at least the up threshold, down threshold may be ok)
also the freq_step at 10% should be at least at 15%
if we compare it with laststufo's kernel (he almost had 100 MHz steps everywhere: 100, 200, 400, 600, 800, 900, 1000 MHz)
so that needs to be compensated to get smoother & similar behavior
I'll take a look & see how the new smartass settings work out
my new conservative settings are:
echo "76" > /sys/devices/system/cpu/cpufreq/conservative/up_threshold # 50 # 76 # 76
echo "30" > /sys/devices/system/cpu/cpufreq/conservative/down_threshold # 35 # 12 # 30 (higher will lead to noticable lags) # 35
echo "15" > /sys/devices/system/cpu/cpufreq/conservative/freq_step # more aggressive ramping up (50)
this currently keeps the cpu between 100-200 MHz while playing MP3s for me (screen off) - mostly 200 afaik right now
but I'll try your conservative settings, too, when I find time - let's see how they are in terms of "smoothness" (I'm sure they're not too usable with the GUI but could be great for background tasks while the screen is off)

Hi Zach, indeed, I would say that the conservative settings are completely unusable with the screen on. I would not recommend these with the screen on.
However, with music (DSP manager too) GPS and Cardio Trainer all running (my cycle home), it seems to work fine (screen off). Every km, Cardio trainer speaks the time taken over the music (two audio streams). With many kernels this becomes slow, or slurred, but sounds perfect with these settings.

well.heeled.man said:
Hi Zach, indeed, I would say that the conservative settings are completely unusable with the screen on. I would not recommend these with the screen on.
However, with music (DSP manager too) GPS and Cardio Trainer all running (my cycle home), it seems to work fine (screen off). Every km, Cardio trainer speaks the time taken over the music (two audio streams). With many kernels this becomes slow, or slurred, but sounds perfect with these settings.
Click to expand...
Click to collapse
awesome !
so it still raises the frequency when needed ?
100 -> 200 (or more)
you checked via e.g. CPU Spy ?
thanks !

Yes, it still goes up when needed (confirmed via CPU Spy), but it needs to be really pushed. It seems like good behaviour in the screen off state.
EDIT: something in the region of a 66%/33% 100/200mhz split at these settings.

I am struggling to confirm that my settings are being applied as I would like in the screen off state. I can read off the values in /sys/devices/system/cpu(/cpu0)/cpufreq/conservative if I manually set conservative in Pimp My CPU with the screen on, but the behaviour seems at odds with the values i.e. not as laggy as one would suspect.

As (a variation of) this script are now used in Glitch's too, I have changed the comments to allow people to very easily see which settings are from kernel devs (which should probably be left alone should you wish to return to their defaults) and experimental settings (which I would suggest you change, if you change any). If you want to use parts of it in Zach's, I would suggest cutting and pasting the experimental part into the appropriate part of Zach's script as overwriting any part of it would remove much of his additional functionality.

This is great guys - thanks for this

With one of the main reasons for using smartass as a single governor, the min/max frequencies for the screen on/off state, no longer applicable with the governor changing in relation to the screen state, I have moved to ondemand settings by default. This may have battery implication while the screen is on, but they are VERY smooth.

wrong spot

screenstate_scaling_V49.zip
that's the current version of my screenstate_scaling script that I offer as an option with Neo 17 r7
most of the stuff moved into the S98system_tweak script that now is shipped with the kernel

[KERNEL]05.12.2011 test-kernels [CM7/MIUI] platypus;SECURITY,VOODOO,OC/UV,nodebug,...

I'M A SUPPORTER OF BRINGING OFFICIAL ICS TO THE VIBRANT AND OTHER GALAXY S DEVICES!
> CLICK HERE FOR MORE INFORMATION <​
Click to expand...
Click to collapse
CAPTIVATE edition of the Platypus Revolutions kernel
This Project is inactive/low activity for a longer period of time
Kernel
CM7 & MIUI only
NEO series
(since May 24th '11)
Do you want to discuss on this kernel, get the news on the current state of development, or test kernels even fresher than fresh ?
connect via webchat from your browser:
http://webchat.quakenet.org/
and join #platypus-kernel
(recommended)
Fire up your IRC client, and join via client
the server (for now is) : irc.quakenet.org
port : 6667
Channel : #platypus-kernel​
(thanks to Tk for the layout idea )
before you ask for any ETAs:
The first rule of CyanogenMod [and this project]: DO NOT ASK FOR AN ETA!
---------------------------------------------------------------------------------------
First step before install & kernel switch:
Always have this cleaning script on your internal SD card ready
If you're
- switching kernels,
- have issues with auto-rotation,
- the cam,
- bootloops
- want to remove init script
- recover from a failed overclock attempt
please give either:
- lippol94's updated cleaning script (apply via CWM recovery): http://www.multiupload.com/XFH1GCK4MB
or
- WiwiPouPou's SYSTEM CLEANER SCRIPT (also apply via CWM recovery): (http://forum.xda-developers.com/showpost.php?p=14805606&postcount=21739)
a try
the kernel already applies some cleaning steps during install but sometimes that's not enough ...
---------------------------------------------------------------------------------------
Introduction:
Hi guys,
this is my first modded kernel for the SGS (CM7/MIUI only)
I first needed to test it to make sure that it'll be stable & boot at the first place
so far it's very fast & responsive & smooth
This thread shall serve as the center for my testing kernels (stability & functionality-wise)
DISCLAIMER: the kernel (binary) and driver modules are provided as is. If problems occcur they most probably are from upstream and can be fixed with the newest version. Since I'm doing this in my free spare time as a hobby (quenching my thirst for tweaks & performance) updates will occur irregularly as time permits and I see fit (most probably when new features & bugfixes arrive). YOU are responsible for the actions that you take (such as over- or underclocking), etc. You agree that I can not be held liable for any potential damage that arises from your actions in combination with or the usage of this kernel and other related parts.
Kudos:
* Google, Andy Rubin & the whole Android crew
* Linus Torvalds & the kernel hackers for upstream Linux
* cyanogen & all the devs out there hacking on this
* Supercurio for enriching our media experience of this smartphone
* codeworkx, coolya, guiper, atinm - the whole teamhacksung|cmsgsteam crew and all other hackers working on CM7
* laststufo, hardcore, nikademus, existz and all the other kernel hackers on the SGS forum
* zen-kernel team for inspiration to create a kernel, too
* all other contributors (devs, users, etc.) who make this possible
The purpose of these kernels is extensive stability testing addressing the following sticking points:
- overall stability & functioning of the kernel and phone
- call drops, missed calls, etc.
- lags (suggestions for improvements are welcome)
- auto-rotation, sensors, etc.
- Voodoo Control Plus [any crashes ? compatibility problems ?]
- working on CM7 or MIUI ?
- scheduler, sound, video synchronisation & lags: Tap Tap Revenge 4 (especially at the beginning of songs)
- scheduler, sound, video synchronisation and any other issues: doodle dash (while shooting & sound activated)
- proper pmem memory layout & settings: proper functioning of Google Googles
for those who love SAUCE (Source):
old source:
ALL MY SAUCE for QUORRA KernalZ ^^
new source:
android_kernel_samsung_aries
(fork and 1:1 update to upstream kernel source - changes in different branches)
(latest changes sometimes might not be in [yet] but in the whole repo everything should be available)
current UV & OC stable values:
Recommended apps for OC/UV:
- Pimp my CPU (also available here on XDA for those who don't have a credit card, etc.)
- Xan's VoltageControl
on stability testing:
http://forum.xda-developers.com/showpost.php?p=13255871&postcount=5
(start with "Q: I'm new in OC/OV operations so please could you explain to me how to set it in the best way?")
the following OC/UV values are only applicable for kernels with the old OC/UV implementation (max. 1.3 GHz)
my current UV (undervolt) stable Values :
old OC/UV implementation (morfic, bilboa1/kang, TheEscapist):
1300000 0 (haven't tested 1.3 GHz much yet)
1200000 -25
1000000 -50
800000 -75
600000 -100
400000 -100
200000 -125
100000 -150
edit:
1200000 -50
1000000 -75
800000 -75
600000 -225
400000 -125
200000 -150
100000 -175
thanks jetcz !
new OC/UV implementation (morfic, bilboa1/kang, TheEscapist - Tk-Glitch):
Tk-Glitch said:
Note that these UV settings will be unstable on many devices. It's only informative.
1600 MHz - 1.500v / -> That's high and many devices will fail on this frequency. Find working UV for you if any.
1500 MHz - 1.500v / -> That's high and many devices will fail on this frequency. Find working UV for you if any.
1440 MHz - 1.475v / -75mv
1400 MHz - 1.450v / -75mv
1300 MHz - 1.400v / -75mv
1200 MHz - 1.350v / -75mv
1000 MHz - 1.250v / -50mv - If you have stability issues, try to let this one by default.
800 MHz - 1.200v / -75mv
400 MHz - 1.050v / -100mv
200 MHz - 0.950v / -150mv
100 MHz - 0.950v / -200mv - (can be very different between two devices)
More volts is not always equal to more stability. Try to add more UV (less volts) if the frequency you're trying to achieve is unstable.
Considering all phones will respond differently to OC/UV, to tweak the values to suit your device will be required.
By default, no overclock/undervolt is applied. You'll need to use one of the tools below to adjust the frequencies and voltages.
Note : Never ever use SetCPU with this kernel. You could encounter many stability problems like random reboots or bootloops.
Click to expand...
Click to collapse
3D performance and games:
recommended apps:
[root] Chainfire3D

1st backup post (kernels)
Kernels:
kernels are listed in descending order
older -> newer (newest at the bottom - for now)
officially declared new stable kernels will be up soon !
for now please go to the IRC channel (1st post to get the newest test-builds)
NEO 17 -r12 codename: Butterfly
http://forum.xda-developers.com/showpost.php?p=17339783&postcount=21
NEO 17 -r18 codename: Butterfly
http://forum.xda-developers.com/showpost.php?p=18268518&postcount=132
NEO 18-update1 codename: funky fish
NEO XX.1-update1 codename: mighty rhino
http://forum.xda-developers.com/showpost.php?p=19999998&postcount=192
ALL USERS MUST UPDATE (this fixes yet another potential data loss trigger)

2nd backup post (Changelogs)
Changelog list:
obsolete right now

3rd backup post (modems list)
modems:
Description:
Modems play a crucial role in how much battery drains in standy.
e.g. if you have a good signal area and the modem still has high
"Time without a signal" indicator under Cell standby you still will get bad standby time
make sure you have little to no "Time without a signal" in Cell standby
there also somewhat seems to be a connection between "Time without a signal" and high "Android OS" number in battery use (!)
Following modems are only compatible with new radio (modem) partition layout:
radio-cm-7-GalaxyS-JVP-signed.zip (4.29 MB)
md5sum: fb38dbf82daf0720fd2328f5f649013e radio-cm-7-GalaxyS-JVP-signed.zip
For more modems & bootloaders please go to siky_dude's Modem Thread:
[CM7/MIUI][28.08.11] Modems + Bootloaders(MD5)
[SGS / i9000 Thread so some frequencies might be missing, e.g. 850 MHz]
for more modems please refer to a modem thread in the Captivate Forums section

4th backup post (results)
Results & FAQ/Documentation
Results:
(04/27/2011) Results for platypus-kernel_20110427_18_quorra_r1:
- broken auto-rotation & sensors for some [insert ROM (CM7 ? MIUI ?)]
- stable
(05/03/2011) Results for CM7_SGS_platypus-kernel_20110503_17_quorra-r4_exp
- high battery drain, either due to kernel config or optimization flags, fixed with >= quorra r5 (2nd update)
FAQ / Documentation
@bootloop / boot post victims ^^
Hi guys,
could you please try to replace the existing kernel on your MIUI or CM7 nightly CWM-Package with my kernel, modules and its scripts ?
then install that updated package (with the new kernel, modules and scripts)
after that all should work
the bootloops seem to be an issue with bml_over_mtd (broken sectors on the SSD on your phone)
I'll investigate this and see if anything needs to be rewritten and/or updated in that regard
Thanks !
Overclocking / Undervolting:
Q: I'm new in OC/OV operations so please could you explain to me how to set it in the best way?
A: start with -50 mV (delta from default value) other values probably are too low
my testing includes:
- Angry Birds Rio (several missions)
- Gun Bros (for some time)
- mp3 playback, (flac playback - optional)
- surfing the web via browser, opening up bit.ly links from cmsgsteam twitter feed
- watching youtube video
- watching video via rockplayer lite or mobo video player
- running benchmarks (Smartbench 2011, quadrant standard, an3dbenchXL, anTutuBench)
- Labyrinth Lite (for gravity sensor), auto-rotation (also for sensor)
when 1 GHz (1,2 or 1,3) is OK - go lower with undervolt value (e.g. -75 mV)
after it gets un-stable - go back to last known stable value
then you can limit max frequency to lower one, e.g. 800 MHz
and repeat testing for that frequency
for more info: checkout shaolin95's Mini Overclocking Guide:
Link: http://forum.xda-developers.com/showthread.php?p=12910471#post12910471
LED Support FAQ
Q: Do LED notification require an app, such as BLN, etc ?
A: No. It uses Android's and Cyanogen settings, other apps are not required, although some that are designed for regular LEDs may work.
Q: How to I turn off LED notifications, scheduled or/and complete turn off?
A: Use Cyanogen's Quiet Hours feature (settings>cyanogen>sound>quiet hours) and check "Dim the LEDs during quiet hours" (in reality it will turn them off on the SGS). If you schedule a complete day, then LED notifications will be off all the time.
Q: How do I setup per app, find other LED settings etc?
A: Settings>cyanogen>interface>LED notifications
Q: What to do with LED color settings?
A: We have only one color, so that doesn't work. Use Green as default setting. Some non-bright colors turn off notification, as it's the equivalent as diming LEDs (note that on real LEDs if you dim them too much they look like off too anyway, the difference is that it's gradual. On the SGS the LEDs can be only on or off, not gradual)
Q: How can I troubleshot my system, I can use ADB but...
A: adb logcat | grep lights (on linux) will show you Android requests to turn LED on or off. "status" tells you what we decide will be interpreted as "turn LED on" (1= on, 0 = off)
adb shell cat /proc/kmsg for live view (or adb shell dmesg if you're using adb after the issues occurs - careful the backlog is limited in size so don't be too slow)
notify_led_on and notify_led_off are requests to the kernel to turn LED on or off.
touch key write/read errors (cypress) are non-fatal failures to ask the touch key to do something (eg lit up the LED), when the hardware goes crazy or there's a logical error in the code (can be both)
touch key recovery routine or "stopped responding" are either hardware errors, either a logical error where the driver would try to write something the touchkey doesnt understand. in some occasion lock&unlock fix those as a work around, of course a permanent fix is required
Voodoo Color settings:
Q: I don't have that nice ice-ish white color on my screen anymore - you suck !
Q: my screen looks like someone pissed on the screen - you suck !
(sorry for the language ^^)
A: I love you too ^^
download Voodoo Control or Voodoo Control Plus
Screen RGB multipliers:
- Red: 321*
- Green: 321*
- Blue: 429*
Screen v1 gamma hack:
- use Alt. settings
- or if you prefer others - use: "Reset to 2.3.3 defaults", "Punchy settings" (punchy could lead to a great screen while locking the screen and having "screen off" animation disabled)
other recommended settings:
Also a lil tip for people who use voodoo color!
1 )Color Profiles: Voodoo Profile V1
2 ) Screen v1 gamma hack :
- 50 red
- 53 green
- 44 blue
3 ) SRB multipliers:
Red ="2300875360"
Green ="2300875360"
Blue ="2709919680"
With those adjustment, black colors are BLACK and white colors are WHITE. Everyone should try this.
Click to expand...
Click to collapse
SGS CM7 nightlies wiki
http://sgscm7nightlies.pbworks.com/w/page/41483487/FrontPage
Android OS bug, :
(thanks to ceriko ! and his awesome guide for DarkyROM 10.1)
If your battery drains very fast and your battery stats mentions Android OS above 10%, often between 40 and 60%, sometimes more, this is the best to do as far as I know:
- Remove the 2/3 system files as per the beginning part of this guideguide about batterie issues.
- Install WatchDog and open (I set it to "moderate", then I close it, that's all), this app will warn you whenever an app or a process miss-behaves by draining the battery excessively. It will not fix it but just flag it and you will see a notification.
- Reboot usually stops the drain for a while until it naturally comes back, so reboot whenever you see Android OS above 10% and rising or after you see WatchDog mentioning "Suspend" process using too much battery (the suspend process hanging is the Android OS bug).
- Some apps trigger it, most common are Gameloft games (blame Samsung, not the games/apps). No need to use apps or games for this drain to happen, it also happens straight after boot once phone has been fully charged.
This bug can not be fixed by anyone but Samsung. Some never see it, some will experience it everyday no matters what they do... It's just annoying and unfair but that's the same on all Gingerbread releases by Samsung (JVK, JVB, JVO, JVH). Apparently even the SGS2 has this...
screenstate scaling aka my governor won't change after screen locked:
So what is this all about ?
it's an init script that is put in to /system/etc/init.d
and switches between the configured governors in the script
depending on whether the screen is on (AWAKE_GOVERNOR) or off (SLEEP_GOVERNOR)
in most cases your phone is off - in that case it would be good to use a governor which doesn't fire up the cpu frequency too fast since you don't need it (no GUI, smooth scrolling, etc. needed while the screen is off - lol),
so conservative governor is set
when using the phone (screen on) it really depends on what you want to do: e.g. latency & smoothness is crucial: try smartass2, smartass, ondemand;
you're mainly browsing & reading stuff: try ondemandb, conservative (the screen is already burning enough battery so you don't need another component burning yet more)
only use one governor at a time
e.g.
AWAKE_GOVERNOR
# AWAKE_GOVERNOR
# AWAKE_GOVERNOR
SLEEP_GOVERNOR
# SLEEP_GOVERNOR
# SLEEP_GOVERNOR
that means lines with "#" are commented out and not used by the script
e.g.
# AWAKE_GOVERNOR
AWAKE_GOVERNOR
# AWAKE_GOVERNOR
SLEEP_GOVERNOR
# SLEEP_GOVERNOR
# SLEEP_GOVERNOR
also would work (intentionally not filled in any governors)

@all:
Neo 17 r10 is available on IRC !
Changelog said:
NEO 17 (r10 - codename Butterfly) changelog [SGS/Telus, Captivate, Vibrant]
Changes (from r9 - 2nd testbuild):
• bumped RAM up to 348 MB (everything should still work, incl. Youtube HD recording)
• ported over smartass2 governor (super-smooth & battery-efficient, hopefully no issues anymore with getting stuck on high frequencies - unless due to system & broken apps)
• back to cm7 vanilla/stock yaffs2 driver - let's see if this fixes the discouraged random resets for few people (loss of contacts, apps gone, etc.)
Click to expand...
Click to collapse

Wow! New thread finally!
I'm testing with the Neo 17 R10 Kernel now.
Thanks!

Woohoo!
Sent from the frozen tundra known as Canada.

Spectacular. Gave it a shot from r7 and loving it since. Looking forward to future updates.
And about time for your own thread!
Sent from my I897 using Tapatalk

Thanks for the awesome kernels, they always work great, and I always look forward to the progression of this kernel. Thanks again for all your hard work, you are very talented.
Sent from my I897 using XDA App

I'm loving it as well, I don't oc much, maybe uv a little, and I do like the vc. Great work.
Sent from the frozen tundra known as Canada.

Thanks zach, r11 + smartassV2 is really super-smooth! You are doing an amazing job.
No problems so far, I got my last SOD on r9.

So on Neo 17 v11 what is set for governor(not showing in pimp)?? I got confused when reading the whole thing. Plus did you say it won't change from awake governor to sleep governor with the screen off? If so how do I make it so it does?? I don't see a screenstate scaling in root exploring under the right location. I have in the past but.can't now.
Sent from my I897 using XDA App

buresh.kevin said:
So on Neo 17 v11 what is set for governor(not showing in pimp)?? I got confused when reading the whole thing. Plus did you say it won't change from awake governor to sleep governor with the screen off? If so how do I make it so it does?? I don't see a screenstate scaling in root exploring under the right location. I have in the past but.can't now.
Sent from my I897 using XDA App
Click to expand...
Click to collapse
Uninstall Pimp My CPU.
Delete the Pimp My CPU folder in your SD Card.
Reflash the Neo 17 R11 Kernel and the V51 Script again.
Install back Pimp My CPU.
OK, you'll see the Governor and Scheduler which already been set by Neo 17 R11 Kernela and the V51 Script.

the new platypus 17r11 is superfast, my CAPPY felt great with it
thanks Zach
hope the color issue soon to be fix since i like to customize the color temp

Fate-Silver said:
Uninstall Pimp My CPU.
Delete the Pimp My CPU folder in your SD Card.
Reflash the Neo 17 R11 Kernel and the V51 Script again.
Install back Pimp My CPU.
OK, you'll see the Governor and Scheduler which already been set by Neo 17 R11 Kernela and the V51 Script.
Click to expand...
Click to collapse
Did you have this problem as well?? ha! I found the V51 Script, I think!
I tried to change awake governor but it's not showing in Pimp my Cpu. I rebooted, tried deleting & installing it again but no luck.
I edited the script with text editor from Root Explorer, put # infront of ondemandb, and took # from smartass2. Rebooted but pimp my cpu is showing ondemandb.

hi. can you flash this using the orange cwm that comes with cm7?

yuhenyo said:
hi. can you flash this using the orange cwm that comes with cm7?
Click to expand...
Click to collapse
Yes you can.
Sent from my I897 using Tapatalk

simple man said:
Yes you can.
Sent from my I897 using Tapatalk
Click to expand...
Click to collapse
awesome! can't wait to flash this. So is the download link in the other thread? I can't seem to find it on this one. or is it?

yuhenyo said:
awesome! can't wait to flash this. So is the download link in the other thread? I can't seem to find it on this one. or is it?
Click to expand...
Click to collapse
http://webchat.quakenet.org/
The instructions are in the O.P., but you'll need to login, download the file, extract the unpack_me.zip pick the kernel of your choice, download the kernel cleaning script 1st page this thread,flash it, then your kernel, then the screen state script.
Sent from my I897 using Tapatalk

Phone slow after root

I rooted and am running tek s ROM. The phone has been super laggy and slow since I flashed that ROM. Any advice.

Have you switched the governor to interactive or on-demand? That's the most important piece. The below link has a bunch of tips (universal to qualcomm/US S7 and S7e) to improve performance.
http://forum.xda-developers.com/ver...-to-notes-root-install-xposed-unroot-t3411039

pitbullmommy45245 said:
I rooted and am running tek s ROM. The phone has been super laggy and slow since I flashed that ROM. Any advice.
Click to expand...
Click to collapse
Check the thread under Guides about common problems and fixes.

I did but I didn't see a fix for this. I did what another member told me to do and it worked.

pitbullmommy45245 said:
I did but I didn't see a fix for this. I did what another member told me to do and it worked.
Click to expand...
Click to collapse
Bug #1: Phone is laggy after rooting the phone/Battery is down the tank.
Fix: The phone is (partially) lagging because the ENG bootloader automatically sets the CPU governor to "Performance." While this is supposed to lock the CPU frequency at the maximum values, it does cause a lot of heat and possibly throttling. Additionally, the max core clocks are set to 1.593Ghz instead of their actual maximums. Not every CPU Tuner will allow you to set the big cores separately, so look around for one that does if you don't want to use Kernel Toolkit.
First, use Flashify to flash one of two zips provided by psouza4 on our sister Verizon Galaxy S7 (Edge) threads.
1. Kernel fixes & tweaks V15
2. Kernel fixes, tweaks, & Debloater
You need only flash one of these two zips. One additionally debloats the system, one does not. Choose whichever suits your needs.
What the zips do:
CLICK TO SHOW CONTENT
Next, install a CPU Tuner utility like Kernel Toolkit, then change the governor from "Performance" to "Interactive." Also change the max CPU frequency of the little cores to 1.593Ghz and the big cores to 2.150Ghz while you're at it. Leave the cores at their default minimum frequency. This will go a long way to improving the speed of the phone. Also make sure you that have the new settings to apply on boot. Every kernel manager should have this option somewhere.
Note: Although the max frequency in the settings screen will drop to some number, as long as you can see the CPU ramp up to the new settings in the information screen, then everything is fine. You can test the max frequency by turning the screen off and then back on.
Then, install sEFix and set entropy to "Ultra."
Lastly, install L Speed and:
Code:
-Main Tweaks: Turn on
-Battery Improvement
-OOM Killer
-Kernel Tweaks - "Light"
-CPU Tuner: Turn on
-CPU Optimizer
-LNET Optimizer: Turn on
-Google DNS
-Faster Streaming
-Faster Dormancy
-IO Tweaks: Turn on
-IO Boost
-Partition Remount
-RAM Manager
-Balanced
-Seeder
-Moderate
Literally the first bug and fix on the guide.

[A6020] Kernel Tweaks [03/31/2017]

Kernel Tweaks Intended for balanced performance/battery life on actual usage.
Please provide feedback.
Changelog/FAQs
Attention! It assumes that you've already optimized your phone (background apps, idle drain, wakelocks...), which is up to you, and NOT covered on this post.
All sources and credits at the end.
Great thanks to @Dreamstar for the awesome Vegito Kernel!
NOT recommended for gaming, image processing or heavy loads.
Tweaks:
CPU
I/O scheduler
GPU
HMP scheduler (big.Little related)
Virtual Memory
perfd, sched_boost and sched_load disabled to use LITTLE as the main cluster in order to save power
Minimal overheat
Any ROM/Kernel:
http://www6.zippyshare.com/v/PGToHEyx/file.html
does NOT affect hotplug at all, may seem sluggish with incorrect profiles (due to lack of optimization)
does not apply Input Boost
disables Touch Boost (if present)
Kernels with Core Control (core_ctl) hotplug enabled (Lineage OS, AOKP, RR):
Option 1:
http://www103.zippyshare.com/v/WQlpK3en/file.html
Great SoT/Battery Life
May feel sluggish
May contain micro lag/stuttering
2 Little cores always online
big cluster offline most of the time
may have problems with audio crackling during music playback
Option 2:
http://www103.zippyshare.com/v/tz4IiM4n/file.html
Biased towards performance (in case the previous one was behaving bad)
Slightly less battery life
Smooth enough
Little cluster always online
big cluster offline most of the time
Vegito Kernel (RECOMMENDED):
http://www76.zippyshare.com/v/lSXeYI9b/file.html
New*: http://www19.zippyshare.com/v/n9CsRYYk/file.html
*if unstable (e.g. force close), set swappiness to a value between 10~60
Best balance between performance/battery
Snappy
Smooth
Above-average SoT
Thunderplug support
big.LITTLE always online (lower latency and no waste of CPU cycles)
Input boost set at 998Mhz on Little cluster, with duration of 1980ms. (not very battery friendly, try lower values)
Useful links:
The truth about kernels and battery life
Your battery gauge is lying to you (and it's not such a bad thing)
Diving into Doze Mode
Battery Calibration (myth)
Battery Drain Benchmarks
Sources/Credits:
Original GlassFish settings for interactive by @soniCron
Interactive governor battery save scripts by @Sickaxis79
Xiaomi Mi Max Kernel Guide by white778899
LSpeed by @Paget96
[AKT] Advanced Kernel Tweaks by @Asiier, @patalao, @Mostafa Wael and @Senthil360

Changelog 03/31:
Code:
Cleanup:
- Fixed useless loops and condition checks
- Added credits (developers of Project Zhana/Advanced Kernel Tweaks)
- Typos
Vegito only (unstable):
CPU:
- Timer slack cut in half (from 480000) on big Cluster
- Increased 'go_hispeed_load' (91 -> 400 on big, 91 -> 155 on LITTLE)
- Input Boost duration reduced to 120ms (from 1920ms); (drastically improves battery)
- Input Boost frequency increased to 1113MHz (from 998MHz); should not affect battery much, since it stays on the same voltage
GPU
- Revert 'underclock' (465MHz -> 550MHz) to minimize UI lags, trust Adreno Idler to reduce power consumption.
HMP Scheduler:
- Lower 'sched_upmigrate' (90 -> 85)
- 'sched_freq_dec_notify' decreased (410000 -> 400000)
Virtual Memory:
- Increased ZRam to 256MB (from 128MB)
Changelog 03/30:
Code:
HMP Scheduler:
- don't schedule background tasks on big cluster
Virtual Memory - reduce usage of CPU cycles:
- new values from Project X.A.N.A (high dirty_ratio and dirty_background_ratio, min_free at 4M and default vfs_cache_pressure)
IO Scheduler:
- New logic to apply I/O scheduler (from Project X.A.N.A)
- Try ZEN
- if zen is not available use noop (on Lineage OS), otherwise use BFQ.
- increased read-ahead to 512Kb (core_ctl scripts still use 128Kb)
- apply to internal and external memory (SDCard) if present
- changed zen tunables (thanks to [URL=https://forum.xda-developers.com/oneplus-3/how-to/advanced-interactive-governor-tweaks-t3476589][AKT] Advanced Kernel Tweaks[/URL] by [user=6187429]@Asiier[/user] - Project X.A.N.A
Cleanup:
- moved verbose descriptions (now at the end of this post)
- Mhz -> MHz
core_ctl only:
CPU:
- target load set to 499Mhz until 75% (from 70%)
Virtual Memory:
- 20 swappiness and 70 vfs_cache_pressure
- page-cluster set to 0 (read only 1 page from swap each attempt)
- Laptop Mode set to 1
Vegito only (unstable):
HMP Scheduler:
- try to use big cluster more, easing the load of the the LITTLE cluster (from [URL=https://forum.xda-developers.com/showpost.php?p=69417941&postcount=724]Project X.A.N.A[/URL]) (*trying different freq_notify values atm)
- big.LITTLE should not overload a single core or cluster.
CPU:
- align_windows set to 0 (both clusters)
- increased min_sample_time (from 0)
- revert 'fix erratic jump to 998Mhz while idle'
Virtual Memory:
- swap only to avoid out of memory conditions ( vm.swappiness = 0 ) # if unstable (e.g. force close), set to a value between 10~60
- lower ZRam (200MB -> 128MB)
- Laptop Mode disabled
Changelog 03/29:
Code:
Cleanup:
- add simple function to change permissions and apply settings
- typos
Vegito only:
CPU
- fix erratic jump to 998Mhz while idle
--------------------------
FAQs
How to apply (need root):
Apply every boot.
Using Terminal (RECOMMENDED):
Code:
su -c 'sh /script directory/script.sh'
or
su
cd 'script directory/'
sh script.sh
Can be found at Developer Options or you can download one from the Play Store: https://play.google.com/store/apps/details?id=com.termux
Using Kernel Adiutor:
Copy file to /etc/init.d/
Give permissions rwxr-xr-x (0755)
Go to init.d tab on Kernel Adiutor
Execute script.sh
Why do you leave all cores online??11 (vegito)
CertifiedBlyndGuy said:
Thought I would add more to this and make it useful for a few users.
The reason behind why Mpdecision is disabled by default is due to the fact that it is highly inefficient in the sense that hotplugging on Linux, put simply, sucks. Why? The hotplug acts as a front-end to the scheduler to provide a means of plugging and unplugging cores in exchange for a high amount of latency. This means that even though a core may be plugged, there is a delay of several milliseconds before this is actually processed causing microstutters that are hard to notice, but do disrupt performance. The same can be said for the thermal driver and how it Aries frequencies.
Click to expand...
Click to collapse
franciscofranco said:
Leaving all cores online is fine, they'll hit retention and power collapse pretty quickly if nothing is running on them. There's a lot of work when offlining and onlining cores.
Click to expand...
Click to collapse
franciscofranco said:
Hotplug is the action of onlining a core (after it has been unplugged) in a live system, which is present in any Kernel of any device with more than 1 core. You can offline it through sysfs. What you are asking is: if there's any automatic mechanism that onlines & offlines cpu cores based on some special heuristic. The answer is no.
They are online at all times unless there's the need for some thermal throttle. They'll follow the standard Linux resume->suspend mechanism just like any other "normal" phone when the OEM doesn't **** with the natural cycle. This is exactly how the Nexus 6P (same chip) works. I explain it in the changelog & in the feature list. Cores will go to idle in a "jiffy" if they don't have any runnable threads running.
Click to expand...
Click to collapse
From: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.den0024a/index.html
Code:
15.1.3. Retention
The core state, including the debug settings, is preserved in low-power structures,
enabling the core to be at least partially turned off. Changing from low-power
retention to running operation does not require a reset of the core. The saved
core state is restored on changing from low-power retention state to running
operation. From an operating system point of view, there is no difference between
a retention state and standby state, other than method of entry, latency and use-related constraints.
Check if you Kernel supports the Core Control (core_ctl) hotplug driver:
These folders must be present:
Code:
/sys/devices/system/cpu/cpu0/core_ctl/
/sys/devices/system/cpu/cpu4/core_ctl/
Extreme Kernel (cluster-plug based -> version 12/30 and above)
Try GlassFishCP or FairyTale from https://forum.xda-developers.com/moto-x-play/general/interactive-governor-battery-save-t3443201
Disable Alucard hotplug (to prevent conflicts with cluster-plug)
Disable Simple GPU Algorithm and enable Adreno Idler (Why)
My battery's still crap:
Check if settings were applied correctly.
Try lower input_boost_ms value (at cost of snappiness, can introduce stutter while scrolling)
Check for wakelocks using BetterBatteryStats
Disable Keep Awake/Wi-Fi scan for Google Play Services (unknown side effects):
Settings -> Privacy -> Privacy Guard -> Advanced (dropdown) -> Google Play Services -> Keep Awake/Wi-Fi-Scan
Disable Keep Awake for apps that refuse to sleep, like Facebook and other battery hoggers.
Greenify
General Battery Tips
Disable location when not using
Remove extra widgets from the desktop
Disable live wallpapers
Settings -> Wi-Fi -> Configure -> Keep Wi-Fi on during sleep - Only when plugged in
Settings -> Wi-Fi -> Configure -> uncheck - "Network notification"
Disable unnecessary sync
Disable automatic updates and notifications for updates on Google Play.
Disable push and notification of social networks.
Do not use Task-killers
Do not use programs and widgets to monitor daily usage of the smartphone.
If the quality of the LTE network connection is poor, switch the "Network Type" to 3G or 2G
Source: https://4pda.ru/forum/index.php?showtopic=707426
Obvious:
Use lower brightness (try to keep it below 30%)
Prefer Wi-Fi networks and disable data connections when not using.
Settings explained:
Code:
Android Documentation
https://android.googlesource.com/kernel/common/+/android-4.4-n-release/Documentation/
Kernel - Virtual Memory
https://www.kernel.org/doc/Documentation/sysctl/vm.txt
Performance Testing with SSDs Pt. 2 by Toby Chappell Systems
https://devs.mailchimp.com/blog/performance-testing-with-ssds-pt-2/
How is Heterogeneous Multi-Processing (HMP) scheduling implemented in Linux Kernel (Samsung Exynos5422)?
http://stackoverflow.com/questions/25498215/how-is-heterogeneous-multi-processing-hmp-scheduling-implemented-in-linux-kern
Scheduler Documentation (from DTS Eagle Integration into [Code Aurora Forum] Android (kernel))
https://github.com/dtsinc/DTS-Eagle-Integration_CAF-Android-kernel/blob/master/Documentation/scheduler/sched-hmp.txt
# Read-ahead cache
# Typically, larger values increase sequential read speed and slightly reduce the random read speed. The larger the cache, the less growth
and the more compromises.
# Setting rq_affinity to 2 tells the kernel that the specific CPU core that requested the I/O must be the one that completes it.
# add_random with a setting of 0 avoids the overheard of I/O events contributing to the entropy pool in /dev/random.
# Standard I/O elevator operations include attempts to merge contiguous I/Os. For known random I/O loads these attempts will always fail
and result in extra cycles being spent in the kernel. This allows one to turn off this behavior on one of two ways: When set to 1,
complex merge checks are disabled, but the simple one-shot merges with the previous I/O request are enabled. When set to 2, all merge
tries are disabled. The default value is 0 - which enables all types of merge tries.
# https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-block
# Laptop mode is used to minimize the time that the hard disk needs to be spun up,
# to conserve battery power. It has been reported to cause significant power savings.
# When the knob is set, any physical disk I/O (that might
# have caused the hard disk to spin up) causes Linux to flush all dirty blocks. The
# result of this is that after a disk has spun down, it will not be spun up
# anymore to write dirty blocks, because those blocks had already been written
# immediately after the most recent read operation. The value of the laptop_mode
# knob determines the time between the occurrence of disk I/O and when the flush
# is triggered.
# A task whose nice value is greater than this tunable value will never be considered as a "big" task (it will not be allowed to run
on a high-performance CPU).
# android background processes are set to nice 10. Never schedule these on the big cluster.
# echo 9 > /proc/sys/kernel/sched_upmigrate_min_nice # 15 default, 9 to never schedule background tasks on big Cluster, and 7
on Project Zhana
Known bugs:
Kernel Adiutor seems to change minimum number of big cores to 2 on Core Control. Avoid checking 'Hotplug' tab when using scripts with core_ctl support (try Kernel Adiutor-Mod if problem persists).

Thanks for credits

What auto run booting???

cenelyanto said:
What auto run booting???
Click to expand...
Click to collapse
Copy file to /etc/init.d and set the right permissions (see FAQ).
Keep in mind these scripts are deprecated.

booting noot run otomatic step by step for on ...otomatis run booting

[Kernel][3.0.101] Chrono Kernel Refresh R4.6.2

Custom kernel for Samsung Galaxy S Advance
Code:
/*
* Your (probably expired) warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
​Hi there!
Because of numerous issues found in 3.4.113 kernel, I'm temporarily moving to development on 3.0.101 base.
What is difference between chrono kernel (CK) and CK refresh build? CK was mostly tested on MM-based ROMs, but appeared not to work stably on Android 4.4.x. Aim of this build is to properly enable support for older ROMs (like kitkat), and when done, merge these changes to 3.4.113 kernel.
This build is based upon chrono kernel r4.1 build, so to avoid versions confusion, I'm creating a separate topic.
Features:
CPU, GPU and DDR OC support
more governors and I/O schedulers
Lite kernel - some kernel features moved as modules
F2FS support
ABB-charger tweaks
many others features and tweaks...
Credits:
@dh.harald and @hafidzduddin for contribution on U8500 platform sources
@ Team Canjica for a base for this kernel
@ Nova Fusion for F2FS implementation
@zwliew for contribution on TC kernel
@cocafe for LiveOPP, GPU OC, abbamp and abb-charger tweaks and many cool patches which I've used from his kernel
@faux123 for dynamic Fsync implementation
@Christopher83 for dynamic management of dirty page writebacks implementation
@KINGbabasula for contribution on TC kernel sources
@boype for SIOPlus tweaks and OndemandPlus governor
@Adi_Pat for abbamp, kernel tweaks
@PolishVodka for initramfs scripts for 4.2.x and 5.0.x
@Rox for help in fixing initramfs scripts for 4.1.2
@ace2nutzer for optimization CPU OC and for whatever scripts which I have used in my kernel
@Meticulus for BLN, Sweep2wake and Doubletap2wake
@mkaluza for huge LiveOPP/Mali improvements and Dynamic governor
@yanpol199 for help with F2FS support in TWRP
@ all users who tests this kernel and directs the development along the right path
@ all those users, who I forgot to mention (PM me if so)
Team Win for TWRP recovery
Samsung for opening kernel source
Linus Torvalds for Linux sources
Special Thanks:
@isaak, @enkflr, @Pdevo, @prometej-zg for donating this phone!
[*]@S.AMU for providing FTP-Server
Source Code:
LK 3.0.y based releases
Installation:
Flash temporary kernel (if coming from other recoveries than TWRP 3.1.1)
Reboot recovery
Flash kernel zip
Notice: this kernel is not compatible with NovathorSettings app, be sure to remove it before installing a kernel!
Download:
FTP
XDA:DevDB Information
Chrono Kernel Refresh, Kernel for the Samsung Galaxy S Advance I9070
Contributors
ChronoMonochrome, cocafe, faux123, zwliew, mkaluza, Meticulus, KINGbabasula, ace2nutzer, TeamCanjica
Source Code: https://github.com/ChronoMonochrome/Chrono_Kernel-1/commits/refresh-3.0.101
Kernel Special Features:
Version Information
Status: Testing
Stable Release Date: 1974-11-11
Beta Release Date: 1974-11-11
Created 2018-03-22
Last Updated 2018-03-23

Changelogs
Changelog
R4.6.2
rebased to CM14.1 branch (added support for 6.0.1 and 7.1.2 ROMs)
R4.6.1
fixed CPU OC instabilities
LCDCLK is adjusted to fix tearing issues *
adjusted Dynamic CPU governor tunables for a better battery live
adjusted PowerHAL profiles **
genfstab: storages swap is disabled by default (remove /ramdisk/fstab_specs.txt before flashing to take this change in an effect)
updated temporary kernel zip
* tested with apps like Impossible Game, a display tearings are mostly resolved here. Apps like Youtube, though, might still causing tearings when playing video.
** the minimum CPU freq is set to 400 MHz. I've decided to use it as a default since 200 and 400 MHz CPUfreq steps are anyway using the same voltage, so unless you're undervolting the CPU, there won't be any significant difference in a battery drain.
R4.6
updated to r4.6 LowMemoryKiller implementation - best so far!
Disabled HighMem
removed some CPUfreq steps *
Dynamic governor: parameters are tuned for the better performance (credits: @ace2nutzer)
Added performance profiles (the corresponding parameters can be found in /ramdisk/perf.profiles.rc)
Other updates from r4.6 (various updates from LK 3.4, tweaks etc)
* Avalable CPU frequency steps are: 200, 800, 1000, 1100, 1200, 1215 Mhz. I've decided just to give it a try - this is a necessary part of tuning the CPU governor. If anyone doesn't like that frequencies between 200 and 800 MHz were removed I can add them back, but until performance-related issues are not resolved I'd suggest just leave as it is.
R4.1
Initial build for janice (kernel sources based on Chrono Kernel r4.1)
LiveOPP: updated to r5.7.1 kernel version
Exfat: test fixes for Stock 4.1.2 ROM (not tested)
Enabled CONFIG_STE_TRACE_MODEM (test fix for Stock ROM incoming / outgoing calls)
Kexec: added janice support

Misc
Storages switch
By default, this kernel comes with internal and external storages switched. You can revert this behavior, by changing the line
Code:
use_swap=1
to
Code:
use_swap=0
in file /ramdisk/fstab_specs.txt and flashing the kernel package. This setting will remain until you format /ramdisk partition.

Thank you Chrono again.
So far I am still having issues with calls on 4.1.2 stock, I took another logcat in case would help you, and seems like phone can't enter deepsleep mode, but I will investigate further this issue with some days of usage.
I couldn't get exfat working, I took the exfat-fuse binary from /sbin in TWRP, then ran "exfat-fuse /dev/block/mmcblk1p1 /storage/extSdCard", tryed also with "mount.exfat-fuse etc etc", the fact is the card is correctly mounted and usable from recovery, but this does not matter after all.
The nice thing is I find multitasking working far better, phone seems to be more responsive in situations where more apps are running at the same time, this is very good to me!.
Another big point is installation went fine and recovery is working perfectly, so problems with possible bootloops are solved (and after some more usage I will go further to your more updated roms )
If there is something more to provide you, test or informations missing, please ask me Chrono

I tested chrono kernel r4.1 on Lineage OS 11.
-Compared to the previous chrono_kernel_r5.7.1, this is considerably slow, especially during the opening of apps like Settings, Contacts, Google News, Play store.
-If I set 1000 Mhz as maximum clock of the dynamic governor, the phone becomes slower and a bit hot on the back.
Multitasking is severely affected by that clock. Multitasking is more stable at 800 Mhz, despite it's still slow.
-If I reboot the phone, the maximum clock of 1000 Mhz is automatically resetted at 800 Mhz.
-If I attempt to reboot the phone in recovery mode from Lineage Os 11 ROM with the PC USB charging cable on, phone will shutdown instead. Disconnecting the charging cable before rebooting the phone in recovery mode is the only workaround. It doesn't happen with the Epirex Kernel, so I think it's related to your kernel.
In my attachment there is a meminfo that I took while the phone was under load.
If it isn't enough, I attached a full logcat. There are some errors and crashes.

@Pdevo, @isaak, thanks for testing!
I tested chrono kernel r4.1 on Lineage OS 11.
-Compared to the previous chrono_kernel_r5.7.1, this is considerably slow, especially during the opening of apps like Settings, Contacts, Google News, Play store.
Click to expand...
Click to collapse
Probably I've rushed things, or sort of. I had a hard time trying to find a considerably stable kernel 3.0.101 base (this one appeared to work stably, though not best, in terms of the performance). Nevertheless, the multitasking should already be better (at least better than in r5.7.1, as in this one LowMemoryKiller appeared not to work at all). I'm updating the sources to a new kernel base, r4.6 which should be even better in multitasking term.
-If I reboot the phone, the maximum clock of 1000 Mhz is automatically resetted at 800 Mhz.
Click to expand...
Click to collapse
Should be fixed in upcoming release.
-If I attempt to reboot the phone in recovery mode from Lineage Os 11 ROM with the PC USB charging cable on, phone will shutdown instead. Disconnecting the charging cable before rebooting the phone in recovery mode is the only workaround. It doesn't happen with the Epirex Kernel, so I think it's related to your kernel.
Click to expand...
Click to collapse
It's a bug in CM11 ramdisk, I've took another one from Codina, and now this issue should be resolved as well.
Pdevo said:
So far I am still having issues with calls on 4.1.2 stock, I took another logcat in case would help you, and seems like phone can't enter deepsleep mode, but I will investigate further this issue with some days of usage.
I couldn't get exfat working, I took the exfat-fuse binary from /sbin in TWRP, then ran "exfat-fuse /dev/block/mmcblk1p1 /storage/extSdCard", tryed also with "mount.exfat-fuse etc etc", the fact is the card is correctly mounted and usable from recovery, but this does not matter after all.
Click to expand...
Click to collapse
I'm afraid that exfat driver built in the kernel is not compatible with this userspace mount.exfat-fuse utility. I won't be able to fix it, until I find a time to return to stock & rebuild either mount.exfat-fuse or kernel driver in order to make them compatible each with other.
As for the deepsleep issue, I can say that at least 4.4.4 is not affected by this bug. Try making sure that no apps are preventing deep sleep (Better battery stats or Wakelock detector can help in that).

New build r4.6 is up!
Changelog
updated to r4.6 LowMemoryKiller implementation - best so far!
Disabled HighMem
removed some CPUfreq steps *
Dynamic governor: parameters are tuned for the better performance (credits: @ace2nutzer)
Added performance profiles (the corresponding parameters can be found in /ramdisk/perf.profiles.rc)
Other updates from r4.6 (various updates from LK 3.4, tweaks etc)
* Avalable CPU frequency steps are: 200, 800, 1000, 1100, 1200, 1215 Mhz. I've decided just to give it a try - this is a necessary part of tuning the CPU governor. If anyone doesn't like that frequencies between 200 and 800 MHz were removed I can add them back, but until performance-related issues are not resolved I'd suggest just leave as it is.

ChronoMonochrome said:
Changelog
updated to r4.6 LowMemoryKiller implementation - best so far!
Disabled HighMem
removed some CPUfreq steps *
Dynamic governor: parameters are tuned for the better performance (credits: @ace2nutzer)
Added performance profiles (the corresponding parameters can be found in /ramdisk/perf.profiles.rc)
Other updates from r4.6 (various updates from LK 3.4, tweaks etc)
* Avalable CPU frequency steps are: 200, 800, 1000, 1100, 1200, 1215 Mhz. I've decided just to give it a try - this is a necessary part of tuning the CPU governor. If anyone doesn't like that frequencies between 200 and 800 MHz were removed I can add them back, but until performance-related issues are not resolved I'd suggest just leave as it is.
Click to expand...
Click to collapse
Tested on Lineage Os 11 without CCleaner.
After flashing this new kernel I had to force a Media scan with Fx File Explorer (that detected over 300 changed files) because the phone was really slow. That was sufficient to speed up the multitasking that now it's much better than previous 4.1 build.
Additional observations:
- Do you think it's possible to improve Media scanner reactivity via kernel?
- Fx File Explorer detects my external sd card as Main storage and Media card as internal storage. This doesn't happen on Epirex kernel.
- Battery usage is higher than previous kernel. If I stay on a webpage in idle, after 30 seconds my battery decreases of one percentage point (i.e. from 70% to 69%). I noticed that a simple swipe on the screen jumps the current clock directly to the maximum frequency, this could be one of the reasons.
- There is only FIOPS as I/O Scheduler and I miss all the other schedulers.
I think you're on the right track!

isaak said:
- Do you think it's possible to improve Media scanner reactivity via kernel?
Click to expand...
Click to collapse
I don't think it's possible. The only possible way is to overclock CPU, though it won't help much.
- Fx File Explorer detects my external sd card as Main storage and Media card as internal storage. This doesn't happen on Epirex kernel.
Click to expand...
Click to collapse
This is a default behaviour in Chrono Kernel. Because on codina we have only 4 Gb of available space, it makes sense just to remove internal storage partition and use the external one as primary. If anyone wants, I can revert this behavior. It's possible to switch storages back by editing file /ramdisk/fstab_specs.txt (set use_swap value to 0) and flashing a kernel package.
- Battery usage is higher than previous kernel. If I stay on a webpage in idle, after 30 seconds my battery decreases of one percentage point (i.e. from 70% to 69%). I noticed that a simple swipe on the screen jumps the current clock directly to the maximum frequency, this could be one of the reasons.
Click to expand...
Click to collapse
Ok, I'll consider of tuning CPU governor in order to provide more battery friendly setup. I was afraid that the battery usage might be too high, but that was a necessary evil, I guess. In the meantime, as a temporary workaround, the maximum CPU frequency can even be lowered to 800 MHz, it should be still fast enough.
- There is only FIOPS as I/O Scheduler and I miss all the other schedulers.
I think you're on the right track!
Click to expand...
Click to collapse
To load more I/O schedulers, you can copy (or symlink) a module file to /system/lib/modules/autoload, then reboot the phone. This doesn't seem to work, a script that loads modules, is broken.
Because usually I don't change I/O scheduler, by default, no more I/O scheds are loaded. Do you have any preferred I/O scheds?

ChronoMonochrome said:
I don't think it's possible. The only possible way is to overclock CPU, though it won't help much.
Click to expand...
Click to collapse
Nevermind.
ChronoMonochrome said:
This is a default behaviour in Chrono Kernel. Because on codina we have only 4 Gb of available space, it makes sense just to remove internal storage partition and use the external one as primary. If anyone wants, I can revert this behavior. It's possible to switch storages back by editing file /ramdisk/fstab_specs.txt (set use_swap value to 0) and flashing a kernel package.
Click to expand...
Click to collapse
I'd like to revert the behavior, so I would appreciate If you could provide the same instructions here and in the other kernel thread..
ChronoMonochrome said:
To load more I/O schedulers, you can copy (or symlink) a module file to /system/lib/modules/autoload, then reboot the phone. This doesn't seem to work, a script that loads modules, is broken.
Because usually I don't change I/O scheduler, by default, no more I/O scheds are loaded. Do you have any preferred I/O scheds?
Click to expand...
Click to collapse
I would suggest deadline, noop, sioplus, zen (plus the existent FIOPS).

ChronoMonochrome said:
This is a default behaviour in Chrono Kernel. Because on codina we have only 4 Gb of available space, it makes sense just to remove internal storage partition and use the external one as primary. If anyone wants, I can revert this behavior. It's possible to switch storages back by editing file /ramdisk/fstab_specs.txt (set use_swap value to 0) and flashing a kernel package.
To load more I/O schedulers, you can copy (or symlink) a module file to /system/lib/modules/autoload, then reboot the phone. This doesn't seem to work, a script that loads modules, is broken.
Because usually I don't change I/O scheduler, by default, no more I/O scheds are loaded. Do you have any preferred I/O scheds?
Click to expand...
Click to collapse
Personally I really appreciate and find useful the external sdcard storage as primary one, should be the default behaviour for me, it makes sense and also I never liked to have some files on one unit and some files on another one (download, pictures, recordings on extsdcard, apps folders, screens, other apps downloads etc on internal), I really like the idea of sdcard as main, like the old times of galaxy mini
Fiops to me is a fair good scheduler, maybe also noop would be useful, but I guess having as much things as modules as possible can help load only the strictly necessary, but I say this without dev knowledge.
I will test this build and especially the deepsleep issues, to see if there are apps causing phone not to sleep, the problem is I didn't add any app, just using the same enviroment that with cocore was going to deepsleep. I will report soon, anyway, good job chrono, keep it up

Pdevo said:
Fiops to me is a fair good scheduler, maybe also noop would be useful, but I guess having as much things as modules as possible can help load only the strictly necessary, but I say this without dev knowledge.
Click to expand...
Click to collapse
Yes, FIOPS is good. I just think that having 2 or 3 additional schedulers to select would be better for different uses.
In my previous post I replaced sioplus with zen, according to the conclusions of this guide. There is an useful (up to date) list of recommended IO schedulers, ordered for everyday usage, battery life, heavy multitasking, etc.

New build r4.6.1 is up!
Hey guys and sorry for having to wait that long for a new releases!
I'm still working on 3.4.x kernel - no great news here, but at least I've found a more less stable sources base, so the only what needed now, is a time to bring up some stability fixes and feature changes.
For now releasing a 3.0.101 kernel with some minor changes:
R4.6.1
fixed CPU OC instabilities
LCDCLK is adjusted to fix tearing issues *
adjusted Dynamic CPU governor tunables for a better battery live
adjusted PowerHAL profiles **
genfstab: storages swap is disabled by default (remove /ramdisk/fstab_specs.txt before flashing to take this change in an effect)
updated temporary kernel zip
* tested with apps like Impossible Game, a display tearings are mostly resolved here. Apps like Youtube, though, might still causing tearings when playing video.
** the minimum CPU freq is set to 400 MHz. I've decided to use it as a default since 200 and 400 MHz CPUfreq steps are anyway using the same voltage, so unless you're undervolting the CPU, there won't be any significant difference in a battery drain.

ChronoMonochrome said:
** the minimum CPU freq is set to 400 MHz. I've decided to use it as a default since 200 and 400 MHz CPUfreq steps are anyway using the same voltage
Click to expand...
Click to collapse
On Lineage OS 11:
Using more accurately the Performance function in Lineage Os Settings (an example here), there are different bugs:
1) Minimum CPU freq here is still set at 200 MHz after I flashed chrono kernel 4.6.1.. but this time I forgot to flash the temporary kernel before your kernel.
Anyway chrono kernel 4.6.1 was flashed without issue using TWRP 2.8.7.0.
2) Maximum CPU freq is automatically restored at 1000 Mhz after any reboot, even if I set 1200 Mhz (with any governor).
3) Deadline scheduler is automatically set after any reboot, even if I set FIOPS as default scheduler.
4) Dynamic governor is automatically set after any reboot, even if I set Zenx as default governor.
5) On the Performance UI, performance profile results automatically set on Balanced after any reboot, even if I set Power save as default (it may be reproducible with "Performance" option too, I didn't check).
UPDATE: I've reinstalled chrono kernel again and these behaviors still happen.

For me the minimum freq was correctly 400 mhz as expected, as always running on stock 4.1.2.
After two days of use I can say you are following the right path.
This time I wanted to remove every possible source of doubts and I went for a clean installation, so doing a complete reset and flashing your kernel, of course after the temporary one. I still have the phone not going to deepsleep and the call issues (basically it is impossible to do and receive phone calls on stock rom).
A part from these I can say I didn't noticed any other issue at all, finding memory management a little improved compared to previous release and battery life still good, considering the phone isn't going to sleep mode.
I think this will continue to improve and soon all these glitches will just be gone away, thank you so much chrono also hoping to settle for a bit on your ultimateROM, only waiting for the vibration working, because that is basically the only notification for me

isaak said:
On Lineage OS 11:
Using more accurately the Performance function in Lineage Os Settings (an example here), there are different bugs:
1) Minimum CPU freq here is still set at 200 MHz after I flashed chrono kernel 4.6.1.. but this time I forgot to flash the temporary kernel before your kernel.
Anyway chrono kernel 4.6.1 was flashed without issue using TWRP 2.8.7.0.
2) Maximum CPU freq is automatically restored at 1000 Mhz after any reboot, even if I set 1200 Mhz (with any governor).
3) Deadline scheduler is automatically set after any reboot, even if I set FIOPS as default scheduler.
4) Dynamic governor is automatically set after any reboot, even if I set Zenx as default governor.
5) On the Performance UI, performance profile results automatically set on Balanced after any reboot, even if I set Power save as default (it may be reproducible with "Performance" option too, I didn't check).
UPDATE: I've reinstalled chrono kernel again and these behaviors still happen.
Click to expand...
Click to collapse
1) Isn't an issue here, the showed CPU frequency is 200 MHz, but the actual CPU pll clock set at 400 MHz. Might be confusing, but yet that is better for a battery life.
2) These aren't really bugs, it's how LOS 11.0 performance profiles works. To change min / max CPU freq, you either need to edit /ramdisk/perf.profiles.rc (and set a custom values) or disable perf profiles. Actually there is one more way - to remove CPUfreq adjusting lines completely from that script - would anyone like this change introduced in a new release?
3-4) I've checked it right now - no issues for me... Have you set "apply on boot" checkbox?
5) It's a known bug of CM11 perf profiles. AFAIK, @ace2nutzer fixed this bug in his CM11 builds. @ace2nutzer, can you please remind how this could be worked around?

ChronoMonochrome said:
2) Maximum CPU freq is automatically restored at 1000 Mhz after any reboot, even if I set 1200 Mhz (with any governor).
Click to expand...
Click to collapse
2) These aren't really bugs, it's how LOS 11.0 performance profiles works. To change min / max CPU freq, you either need to edit /ramdisk/perf.profiles.rc (and set a custom values) or disable perf profiles. Actually there is one more way - to remove CPUfreq adjusting lines completely from that script - would anyone like this change introduced in a new release?
Click to expand...
Click to collapse
Honestly I don't know how to disable perf profiles. If it's a simple thing to do (like a command or two to execute), please tell me how to do it because it's enough for me, otherwise I'd like to try the third way and see.
ChronoMonochrome said:
3) Deadline scheduler is automatically set after any reboot, even if I set FIOPS as default scheduler.
4) Dynamic governor is automatically set after any reboot, even if I set Zenx as default governor.
Click to expand...
Click to collapse
3-4) I've checked it right now - no issues for me... Have you set "apply on boot" checkbox?
Click to expand...
Click to collapse
Yes, "Set on boot" options are correctly set for both Processor and I/O Scheduler.
And I keep "Enable per-app profiles" option turned off.
@ChronoMonochrome
UPDATE 1: It occurs only randomly and with particular combinations. The best way to reproduce is to set these, one at a time:
1) Zenx as governor, min. 200 max 800, Noops scheduler. Reboot.
2) Zenx as governor, min. 200 max 800, Fiops scheduler. Reboot.
2) Zenx as governor, min. 200 max 800, Sioplus scheduler. Reboot.
After the first, the second or the third reboot, some of these values you've set will change spontaneously on their own.
UPDATE 2: I've got a screen flicker issue while I was browsing in Naked Browser with the new LCDCLK frequency.
Tried to set echo 1 > /sys/kernel/mcde/lcdclk, it's ok now, but I've noticed that this value is not kept after a reboot.
Do you need a specific log?
In case please write me any command and I'll give you the output.

isaak said:
On Lineage OS 11:
Using more accurately the Performance function in Lineage Os Settings (an example here), there are different bugs: .....
Click to expand...
Click to collapse
I suggest to keep it unchecked, otherwise it'll change the profile randomly, and that's probably not what u want.
ChronoMonochrome said:
....
5) It's a known bug of CM11 perf profiles. AFAIK, @ace2nutzer fixed this bug in his CM11 builds. @ace2nutzer, can you please remind how this could be worked around?
Click to expand...
Click to collapse
There's still no fix ! But what i did is to add the perf. profile in my control app ... that works fully independently.
But that's probably not what u guys want.
My last try was to do that over build.prop .. this works only for around 15 seconds (after wiping dalvik cache it's around 30 sec.) and then it sets back to "balanced" .. so i use it anyway just for speeding up the boot sequence:
Code:
# CM Performance Profiles (only during boot)
# 0= powersave; 1= balanced; 2= performance - default
sys.perf.profile=2
IMO the best way is to add the perf. profiles button to the quick settings, then it's very easy to switch between the 3 profiles.
Using the same profile for everything is for sure not the best option if u want performance + powersave at the same time.
Personally i use performance, and when i read an pdf or watch a YouTube Video then i switch to powersave.
Using powersave or even balanced for normal usage isn't recommended as it can drain even more battery than using performance, because it's slower and the CPU will stay too long on max. freq and the LCD also will stay longer ON, which leads both to increase power consumption.
So the faster the cpu is, the quicker it'll go on idle (min cpu 200) which is powersaving freq and the faster u'll turn OFF the screen, and logical bigger time on suspend --> deep sleep :highfive:

ace2nutzer said:
I suggest to keep it unchecked, otherwise it'll change the profile randomly, and that's probably not what u want.
There's still no fix ! But what i did is to add the perf. profile in my control app ... that works fully independently.
But that's probably not what u guys want.
My last try was to do that over build.prop .. this works only for around 15 seconds (after wiping dalvik cache it's around 30 sec.) and then it sets back to "balanced" .. so i use it anyway just for speeding up the boot sequence:
Code:
# CM Performance Profiles (only during boot)
# 0= powersave; 1= balanced; 2= performance - default
sys.perf.profile=2
IMO the best way is to add the perf. profiles button to the quick settings, then it's very easy to switch between the 3 profiles.
Using the same profile for everything is for sure not the best option if u want performance + powersave at the same time.
Personally i use performance, and when i read an pdf or watch a YouTube Video then i switch to powersave.
Using powersave or even balanced for normal usage isn't recommended as it can drain even more battery than using performance, because it's slower and the CPU will stay too long on max. freq and the LCD also will stay longer ON, which leads both to increase power consumption.
So the faster the cpu is, the quicker it'll go on idle (min cpu 200) which is powersaving freq and the faster u'll turn OFF the screen, and logical bigger time on suspend --> deep sleep :highfive:
Click to expand...
Click to collapse
Sorry for so late response, I had to take a break in a development because suddenly got sick with a flu (I'm fine now, btw) :silly:
I think I've found a temporary solution to this bug, take a look if you're interested:
https://github.com/ChronoMonochrome...mmit/bd0dcce403633543f1bf11e5f8b476a3e88322cb

New build is up!
Changelog
R4.6.2
rebased to CM14.1 branch (added support for 6.0.1 and 7.1.2 ROMs) *
Hey there! I've been testing 6.0.1 / 7.1.2 ROMs and I've recently got some issues with camera on 3.4.x kernel build, so I've decided to release a new refresh build (based on 3.0.101 sources).
I've rebased the most of recent changes to CM14.1 branch in order to support these ROMs (so if you're using older ROMs like stock 4.1.2 then better to use previous release cause some patches might be missing here).