I have rooted the S8. If I flash a custom kernel now, no matter which one (TGP, NX, NOTORIOUS) I can not turn on the WLAN afterwards, - the slider always jumps out. With and without Wipe, - does not work.
Flash original firmware from sammobile then test it.
osama bhatti0 said:
Flash original firmware from sammobile then test it.
Click to expand...
Click to collapse
Have an original firmware flashed, there goes wireless.
Even after Rooten goes wireless.
bininga59 said:
Have an original firmware flashed, there goes wireless.
Even after Rooten goes wireless.
Click to expand...
Click to collapse
Sir flash latest firmware then root it only by twrp and when you flash twrp you have to wipe data typing yes for complete functionality and them root it by magisk. I hope you wont get any issues. Seriosuly did to my s8 same many times didnt face the issue once.
osama bhatti0 said:
Sir flash latest firmware then root it only by twrp and when you flash twrp you have to wipe data typing yes for complete functionality and them root it by magisk. I hope you wont get any issues. Seriosuly did to my s8 same many times didnt face the issue once.
Click to expand...
Click to collapse
I flashed TWRP with Odin.
Then in the TWRP SuperSU flashed, nothing else.
As soon as I take a custom kernel - no Wi-Fi
Or did I misunderstand you?
bininga59 said:
I flashed TWRP with Odin.
Then in the TWRP SuperSU flashed, nothing else.
As soon as I take a custom kernel - no Wi-Fi
Or did I misunderstand you?
Click to expand...
Click to collapse
Maybe maybe sir its because if supersu maybe, with all due respect repeat process and this time root using Magisk i use it and installed NX kernel worked fine i know kernel provide features but if it doesnt help make compromise with stock kernel and keep using it.
---------- Post added at 09:56 PM ---------- Previous post was at 09:52 PM ----------
And sir dont rush into aything whenever you install twrp after flashing origi al firmware, when twrp boots for the first time you have to keep it read only dont allow modifications then go to wipe and wipe data type yes then reboot your phone compkete setup then install magisk then reboot and again boot into twrp now flash custom kernel. I explained everything what i do and i am fine everythings fine running custom kernel without issue.
osama bhatti0 said:
Maybe maybe sir its because if supersu maybe, with all due respect repeat process and this time root using Magisk i use it and installed NX kernel worked fine i know kernel provide features but if it doesnt help make compromise with stock kernel and keep using it.
---------- Post added at 09:56 PM ---------- Previous post was at 09:52 PM ----------
And sir dont rush into aything whenever you install twrp after flashing origi al firmware, when twrp boots for the first time you have to keep it read only dont allow modifications then go to wipe and wipe data type yes then reboot your phone compkete setup then install magisk then reboot and again boot into twrp now flash custom kernel. I explained everything what i do and i am fine everythings fine running custom kernel without issue.
Click to expand...
Click to collapse
Alright. I'll try Magisk again
I know its a long process but sir told you the same i did to my s8 really hope that this time it works out for you?
---------- Post added at 10:12 PM ---------- Previous post was at 10:03 PM ----------
Sir wait i did a little searching and found this
https://forum.xda-developers.com/ga...elopment/kernel-nox-kernel-v1-t3721469/page18
Post number 174 this will definitely help u.
osama bhatti0 said:
I know its a long process but sir told you the same i did to my s8 really hope that this time it works out for you
---------- Post added at 10:12 PM ---------- Previous post was at 10:03 PM ----------
Sir wait i did a little searching and found this
https://forum.xda-developers.com/ga...elopment/kernel-nox-kernel-v1-t3721469/page18
Post number 174 this will definitely help u.
Click to expand...
Click to collapse
Thank you, - it works.:good::good::good:
bininga59 said:
Thank you, - it works.:good::good::good:
Click to expand...
Click to collapse
Related
I don't have any need for systemless root, but in reading the SuperSU threads, several versions are not working right with Marshmallow. Problem is, it is unclear which versions or if its the systemless part that is broken on marshmallow or the normal SuperSU or whatever else. So I was wondering, if I just want to flash normal SuperSU, what version (and a link if possible) is working with Marshmallow?
If its relevant, XT1575 64GB currently trying to get TruPure 2.2 working but having a lot of problems with Xprivacy and boot loops.
Thanks!
Both work fine for me
if you are not systemless, beta 2.64 works just fine http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Thanks Naddict! I just flash it in TWRP like always?
i am using truepurex 2.1 as i dont care for Android pay and i didnt update further because there is no need.
no boot loops. didnt wipe just updated over 5.1 and xposed working too
silkshadow said:
Thanks Naddict! I just flash it in TWRP like always?
Click to expand...
Click to collapse
Pretty sure there is one more step
Naddict said:
if you are not systemless, beta 2.64 works just fine http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Click to expand...
Click to collapse
Hey i am also confused by reading so many different threads. I just want to know which version works with MM.
Currently i am on stock L (rooted+xposed) on my xt1572 indian retasia_ds.
I am gonna flash ota then flash the latest twrp by hashbang and then boot in twrp and if TWRP asks to keep /system read-only, i'll keep read only. And then will flash supersu and xposed cause i guess now there is no need to flash modified boot.img
So i am really confused which supersu to flash, some say 2.62-3 is working and some say it's not. So should i flash 2.62-3 or 2.64
Also please confirm there is no need to flash modified boot_img
sorry asking so many question because i want to avoid flashing firmware for which i have to wipe the device completely
amit.lohar said:
Hey i am also confused by reading so many different threads. I just want to know which version works with MM.
Currently i am on stock L (rooted+xposed) on my xt1572 indian retasia_ds.
I am gonna flash ota then flash the latest twrp by hashbang and then boot in twrp and if TWRP asks to keep /system read-only, i'll keep read only. And then will flash supersu and xposed cause i guess now there is no need to flash modified boot.img
So i am really confused which supersu to flash, some say 2.62-3 is working and some say it's not. So should i flash 2.62-3 or 2.64
Also please confirm there is no need to flash modified boot_img
sorry asking so many question because i want to avoid flashing firmware for which i have to wipe the device completely
Click to expand...
Click to collapse
if you use 2.62 or higher you do not need to flash anything other than that. No boot.img file or anything else. http://forum.xda-developers.com/showpost.php?p=64161125
---------- Post added at 06:22 AM ---------- Previous post was at 06:21 AM ----------
silkshadow said:
Thanks Naddict! I just flash it in TWRP like always?
Click to expand...
Click to collapse
lafester said:
Pretty sure there is one more step
Click to expand...
Click to collapse
all you do is flash in TWRP, as long as you do not have a modified boot image! See here http://forum.xda-developers.com/showpost.php?p=64161125
Naddict said:
if you use 2.62 or higher you do not need to flash anything other than that. No boot.img file or anything else. http://forum.xda-developers.com/showpost.php?p=64161125
---------- Post added at 06:22 AM ---------- Previous post was at 06:21 AM ----------
all you do is flash in TWRP, as long as you do not have a modified boot image! See here http://forum.xda-developers.com/showpost.php?p=64161125
Click to expand...
Click to collapse
I followed the instructions on that post, keeping TWRP read only and flashing the 2.64 zip and now a ton of system processes are crashing and my sim isn't recognized. Is there a more stable version for the X Pure? This is a fresh MM install, so it shouldn't be conflicting with anything.
DesolateTen said:
I followed the instructions on that post, keeping TWRP read only and flashing the 2.64 zip and now a ton of system processes are crashing and my sim isn't recognized. Is there a more stable version for the X Pure? This is a fresh MM install, so it shouldn't be conflicting with anything.
Click to expand...
Click to collapse
Did you wipe caches? Which ROM did you install? Did you ignore the "install su" while in twrp?
Same for me, after stock MM upgrade, I installed latest supersu beta 2.64, also did wipe both caches, after rebooting there was ton of services just FC's.
BooBzi said:
Same for me, after stock MM upgrade, I installed latest supersu beta 2.64, also did wipe both caches, after rebooting there was ton of services just FC's.
Click to expand...
Click to collapse
Your post states you upgraded, so I assume you did not flash a complete ROM? If not, why not try that?
Naddict said:
Your post states you upgraded, so I assume you did not flash a complete ROM? If not, why not try that?
Click to expand...
Click to collapse
I am using XT1572, so there is not a lot of custom ROMS out there, so I am on STOCK MM. Now I am looking for supersu version that boots, 2.64 just do a lot of FC, 2.62.3 / 2.62 goes into bootloop.
BooBzi said:
I am using XT1572, so there is not a lot of custom ROMS out there, so I am on STOCK MM. Now I am looking for supersu version that boots, 2.64 just do a lot of FC, 2.62.3 / 2.62 goes into bootloop.
Click to expand...
Click to collapse
You could try this one, http://forum.xda-developers.com/moto-x-style/development/rom-trupurex-fast-smooth-t3237155....I have not tried it, but it appears to be a popular one and it might do the trick for you. Just a thought.
Naddict said:
You could try this one, http://forum.xda-developers.com/moto-x-style/development/rom-trupurex-fast-smooth-t3237155....I have not tried it, but it appears to be a popular one and it might do the trick for you. Just a thought.
Click to expand...
Click to collapse
I have used it for some hours. Didnt like it. Kernel modifications on that ROM was killing my battery. But thanks for help!
---------- Post added at 11:02 PM ---------- Previous post was at 10:52 PM ----------
OK! 2.62 did the trick, no bootloop anymore.
Download it from this thread: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
My device boot up, and I tested it. Root is working.
BooBzi said:
I have used it for some hours. Didnt like it. Kernel modifications on that ROM was killing my battery. But thanks for help!
---------- Post added at 11:02 PM ---------- Previous post was at 10:52 PM ----------
OK! 2.62 did the trick, no bootloop anymore.
Download it from this thread: http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
My device boot up, and I tested it. Root is working.
Click to expand...
Click to collapse
Using 2.62 worked for me as well. Thanks for the help ☺
Hi!
I have got Samsung Galaxy J3 SM-J320FN and i want to root this device. Kingoroot,Towelroot didn't work. Can you help me? Pls
Anyone have any info for this, I too am looking to root this device and can't find anything.
Hello!
I have a solution. Try it: http://www.needrom.com/download/root-for-galax-j36-sm-j320fn/
confused by your post
hi,
how does one add to the root file the img file? every time i have tried is says i need to be rooted… which i am not? can you advise the step by step to add the img file without root access to the root folder? maybe the file manager apk you used that we can also download and install and use?
The root folder just means the first part of your storage. I.e not in any folder.
ksanci said:
Hello!
I have a solution. Try it: (I cannot post the URL)
I just got the phone and this no longer works on the latest software (Aug 2016), as it just causes a boot-loop (Others who have commented seem to have the same issue)
Click to expand...
Click to collapse
I have just recently installed tarp 3.0.2.0 recovery and rooted along with xposed
Sparko612 said:
I have just recently installed tarp 3.0.2.0 recovery and rooted along with xposed
Click to expand...
Click to collapse
Was this on the latest version of the firmware, and if so then please let me know how!
Thanks!
I'll put up a link for the files needed . Recovery is for the j320f but it's working on mine no problem and I'm on j320fn. You have to flash recovery via odin and change language when you load it up because I think it's in Russian but not sure . I found all this on a website but can't remember where to now but anyway here you go for TWRP http://mega.nz/#!tBORFSBI
and for flash able root in recovery http://mega.nz/#!1ZFAWZDI
use Firefox to download from mega ok and if you have any trouble flash stock through odin, website for stock rom is sammobile
---------- Post added at 11:03 PM ---------- Previous post was at 11:01 PM ----------
Oops I forgot to mention make sure to enable oem in developer options as well as usb debugging too plus it's for Android version 5.1.1 latest version hope this helps everyone
Sparko612 said:
I'll put up a link for the files needed . Recovery is for the j320f but it's working on mine no problem and I'm on j320fn. You have to flash recovery via odin and change language when you load it up because I think it's in Russian but not sure . I found all this on a website but can't remember where to now but anyway here you go for TWRP http://mega.nz/#!tBORFSBI
and for flash able root in recovery http://mega.nz/#!1ZFAWZDI
use Firefox to download from mega ok and if you have any trouble flash stock through odin, website for stock rom is sammobile
---------- Post added at 11:03 PM ---------- Previous post was at 11:01 PM ----------
Oops I forgot to mention it's for Android version 5.1.1 latest version hope this helps everyone
Click to expand...
Click to collapse
Thanks! - The first link says the file is no longer available and the second requires a decryption key, if you have any alternatives?
(I tried in Firefox and Chrome)
Here for proof of root and version download and view my screenshots
http://www.mediafire.com/download/13zkb20ux6mbl89/root_images(2).rar
Good luck to everyone I'll try to help as much as I can
Sparko612 said:
Here for proof of root and version download and view my screenshots http://mega.nz/#!0Jd0HKyD
Good luck to everyone I'll try to help as much as I can
Click to expand...
Click to collapse
Much appreciated, but this link too asks for a decryption code, as does the TWRP link, so I can't access the download
yeah sure TWRP http://www.mediafire.com/download/blk7qa90vs6wik3/TWRP_3.0.2-0_SM-J320F.tar.tar
root file http://www.mediafire.com/download/cpv2c71cp11x41f/UPDATE-SuperSU-v2.76-20160630161323.zip
hope this helps you out let me know how it goes ok
Sparko612 said:
yeah sure TWRP http://www.mediafire.com/download/blk7qa90vs6wik3/TWRP_3.0.2-0_SM-J320F.tar.tar
root file http://www.mediafire.com/download/cpv2c71cp11x41f/UPDATE-SuperSU-v2.76-20160630161323.zip
hope this helps you out let me know how it goes ok
Click to expand...
Click to collapse
Trying it now and will report back for others - Thanks again!
Flashed the TWRP file using Odin and haven't bricked it so far - Any tips on how to change the language, as my Russian isn't great!?
ns.macd said:
Trying it now and will report back for others - Thanks again!
Flashed the TWRP file using Odin and haven't bricked it so far - Any tips on how to change the language, as my Russian isn't great!?
Click to expand...
Click to collapse
Yes press it's the grey box on the right that has the languages
---------- Post added at 11:48 PM ---------- Previous post was at 11:46 PM ----------
I'll find the xposed framework from which you can install for xposed but please create a nandroid backup before even rooting ok
---------- Post added 9th September 2016 at 12:08 AM ---------- Previous post was 8th September 2016 at 11:48 PM ----------
here is the framework for xposed lollipop 5.1.1 http://www.mediafire.com/download/h...-sdk22-arm-custom-build-by-wanam-20151217.zip
any questions feel free to ask and ill answer as soon as i can
Sparko612 said:
Yes press it's the grey box on the right that has the languages
---------- Post added at 11:48 PM ---------- Previous post was at 11:46 PM ----------
I'll find the xposed framework from which you can install for xposed but please create a nandroid backup before even rooting ok
---------- Post added 9th September 2016 at 12:08 AM ---------- Previous post was 8th September 2016 at 11:48 PM ----------
here is the framework for xposed lollipop 5.1.1 http://www.mediafire.com/download/h...-sdk22-arm-custom-build-by-wanam-20151217.zip
any questions feel free to ask and ill answer as soon as i can
Click to expand...
Click to collapse
All looking good so far. The TWRP flashed OK, and so did the Nandroid back up, so I am just trying the SuperSU install and the phone has rebooted about 6 times so far since the install, so I will keep it going a little longer and see what happens
OK I'll try to find another supersu to flash ok
Sparko612 said:
Yes press it's the grey box on the right that has the languages
---------- Post added at 11:48 PM ---------- Previous post was at 11:46 PM ----------
I'll find the xposed framework from which you can install for xposed but please create a nandroid backup before even rooting ok
---------- Post added 9th September 2016 at 12:08 AM ---------- Previous post was 8th September 2016 at 11:48 PM ----------
here is the framework for xposed lollipop 5.1.1 http://www.mediafire.com/download/h...-sdk22-arm-custom-build-by-wanam-20151217.zip
any questions feel free to ask and ill answer as soon as i can
Click to expand...
Click to collapse
All looking good so far. The TWRP flashed OK, and so did the Nandroid back up, so I am just trying the SuperSU install and the phone has rebooted about 6 times so far since the install, so I will keep it going a little longer and see what happens.
I ended up re-flashing SuperSU a second time, as it was bootlooping for about 25 minutes and it went straight through this time after 1 reboot.
ns.macd said:
All looking good so far. The TWRP flashed OK, and so did the Nandroid back up, so I am just trying the SuperSU install and the phone has rebooted about 6 times so far since the install, so I will keep it going a little longer and see what happens.
I ended up re-flashing SuperSU a second time, as it was bootlooping for about 25 minutes and it went straight through this time after 1 reboot.
Click to expand...
Click to collapse
Oh good news glad to here it's worked now all we need is a decent custom rom if there are any good developers out there
Sparko612 said:
OK I'll try to find another supersu to flash ok
Click to expand...
Click to collapse
All good - The phone is now rooted and SuperSU installed (I haven't tried the Xposed installer yet, but will do tomorrow as off to bed now.
Many thanks for the advise & links... I'm sure there's a lot of people that it will help!
For anyone else wanting to try this, the basic info is broken down below:
Basically, download TWRP & SuperSU from these links & flash using Odin:
TWRP*http://www.mediafire.com/download/bl...-J320F.tar.tar
root file*http://www.mediafire.com/download/cp...0630161323.zip
The TWRP will be in Russian, but if you click on the right-hand side grey box then you can change to English.
First thing to do is run a Nandroid back-up and once completed copy the SuperSU file to the phone/Ext SD card and flash this (I flashed it twice, as the first attempt just made the phone constantty reboot after the logo.
Next you can flash thexPosed Lollipop 5.11 from here :* the framework for xposed lollipop 5.1.1*http://www.mediafire.com/download/hx...m-20151217.zip
---------- Post added at 12:44 AM ---------- Previous post was at 12:42 AM ----------
Sparko612 said:
Oh good news glad to here it's worked now all we need is a decent custom rom if there are any good developers out there
Click to expand...
Click to collapse
There's a thread here, but I will report back if I find any others
http://forum.xda-developers.com/and...eamwin-recovery-project-3-0-2-t3356616/page40
OnePlus X OxygenOS 3.1.4 is released
http://downloads.oneplus.net/oneplus-x/oneplus_x_oxygenos_3.1.4/
Direct link to OnePlus X OxygenOS 3.1.4
http://s3.amazonaws.com/oxygenos.oneplus.net/OnePlusXOxygen_14_OTA_019_all_201611071506_03f73e21449d4d31.zip
What's new:
Fixed launcher related crashes
Updated google secure patch for November
Auto-brightness optimization
General bug fixes
Increased system stability
good
Wow that's actually nice
Download really slow for me, takes three hours, I don't have the time right now. :/
Can we update via twrp-3.0.2-2_blu_spark.v41-onyx_by-engstk.img ?
Flashing made TWRP be overwritten.
After putting it back, I could flash Xposed & SuperSU but it doesn't boot.
I'm on normal 3.1.4 now and it runs great...
I'll trying to flash SuperSU only to verify.
Edit : Flashing SuperSU V78 modded for OOS 3 works.
Xposed seems to be guilty...
alvarjo said:
Can we update via twrp-3.0.2-2_blu_spark.v41-onyx_by-engstk.img ?
Click to expand...
Click to collapse
I did it an it worked without a flaw.
I just flashed this (clean flash), it just works. So far so good, not a single FC happened.
Seems like OP developers is on fire!
Lazy Rich said:
I did it an it worked without a flaw.
Click to expand...
Click to collapse
Can you now reboot on recovery and verify if TWRP is still here?
flashing . . . . . .
*wondering if superSU 2.78 SR3 would work on 3.1.4 either
Ragonexus said:
Download really slow for me, takes three hours, I don't have the time right now. :/
Click to expand...
Click to collapse
Me too. Nothing's wrong with my internet, but somehow this zip, not like any other previous zips, downloads at a very slow speed.
updated with TWRP and it seems that root is still working!!!!!. Now is time to test the new OTA
That's GREATTTTTT NEWSSSS
Omicron Technics
alvarjo said:
updated with TWRP and it seems that root is still working!!!!!. Now is time to test the new OTA
Click to expand...
Click to collapse
Are you sure?
Try to reboot to recovery to see. Mine had dissappeared.
Kéno40 said:
Are you sure?
Try to reboot to recovery to see. Mine had dissappeared.
Click to expand...
Click to collapse
Ok, Perhaps I didn't explain correctly. Root disappeared, but TWRP no, so I installed again supersu and everything was ok
Which supersu did you guys flash? 2.78 SR3 or the modified one?
Enviado desde mi ONE E1005 mediante Tapatalk
sebacolom said:
Which supersu did you guys flash? 2.78 SR3 or the modified one?
Enviado desde mi ONE E1005 mediante Tapatalk
Click to expand...
Click to collapse
I flashed 2.78 SR3,Worked well :good:
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
fchrkbr said:
Me too. Nothing's wrong with my internet, but somehow this zip, not like any other previous zips, downloads at a very slow speed.
Click to expand...
Click to collapse
I hv downloaded it in 5 mins. May be OP server problem.
---------- Post added at 03:29 PM ---------- Previous post was at 03:27 PM ----------
seacowx said:
flashing . . . . . .
*wondering if superSU 2.78 SR3 would work on 3.1.4 either
Click to expand...
Click to collapse
Tested, SR3 is working :good:
Kéno40 said:
Are you sure?
Try to reboot to recovery to see. Mine had dissappeared.
Click to expand...
Click to collapse
no pc/fastboot needed, I did clean install via v41, root is gone but v41 still persisted. how?
- booted to v41 , fully wiped system,data,dalvik,cache
- flashed 3.1.4 finished then directly 'reboot to recovery' within v41 menu (just ignored the "No OS installed") got back to twrp v41,
- wiped cache only and rebooted to system (it was took 8 mins until system completely booted into OS).
- booted back to recovery to check and voila! v41 still persisted, somehow! (even system gt wiped)
- all works just fine so far
any info for superSU 2.78 SR3 would work on 3.1.4? I need to be rooted a.s.a.p. Thanks!
anyone?
---------- Post added at 04:36 PM ---------- Previous post was at 04:34 PM ----------
cva_kabil said:
I flashed 2.78 SR3,Worked well :good:
---------- Post added at 03:27 PM ---------- Previous post was at 03:25 PM ----------
I hv downloaded it in 5 mins. May be OP server problem.
---------- Post added at 03:29 PM ---------- Previous post was at 03:27 PM ----------
Tested, SR3 is working :good:
Click to expand...
Click to collapse
great, thanks man for the info!
So still no VOLTE update
Is it enough to flash SuperSU to root the new version? Maybe Kingroot too? Does someone obtain root without problems?
This is latest stock firmware with november security patch update N910TUVSTEPK2.
Downloaded from sammobiles.com.
Flash with odin.
I uploaded to AFH so you guys can download faster and hopefully someone create a debloated deodexed rooted rom
*Disclaimer*_I am not responsible for any damage of your device Try on your own risk.
HIT THANKS:good:
Download link
https://androidfilehost.com/?fid=385035244224408290
I was just getting ready to flash the T2 KitKat tar and just go back to KK since my N4 became unusable on MM due to shutdowns, non restarts and I guess just plain overheating running MM.. MM has done something to a lot of N4's tons of folks getting shutdowns at 20% or less of charge..etc. I have to let it cool for hrs or stick it in the freezer to get it to boot back up.. thus, the return to KK.. then I see this!.. downloading now and may give it try before returning to 4.4.4...
RaiderWill said:
I was just getting ready to flash the T2 KitKat tar and just go back to KK since my N4 became unusable on MM due to shutdowns, non restarts and I guess just plain overheating running MM.. MM has done something to a lot of N4's tons of folks getting shutdowns at 20% or less of charge..etc. I have to let it cool for hrs or stick it in the freezer to get it to boot back up.. thus, the return to KK.. then I see this!.. downloading now and may give it try before returning to 4.4.4...
Click to expand...
Click to collapse
I am running this new update and so far everything is good.marshmallow is very well optimized only mistake many users do is they dont do factory reset after each update.
Flash firmware and immediately do factory reset so you can get clean fresh operating system.
I know factory reset sucks and pain in the ass to restore apps and stuff but trust me it's worth it.
The 20℅ shutdown battery issue i made complete tutorial how to fix it.
Check link below
http://forum.xda-developers.com/note-4/general/battery-shutdowns-15-20-fix-root-t3513268
Just Confirming..
Trex888 said:
I am running this new update and so far everything is good.
Click to expand...
Click to collapse
Is there any issue with rooting these later builds?
And.. your talking to a guy that wipes his internal storage with each ROM change..
so factory resetting is not an issue with me..
When these things updated back in Sept/Oct my N4 went from a Perfectly Working device to one that, I could pull it out and it would be shut off.. then.. it got to a point it would not come back on without letting it set for a WHILE.. or needed to be cooled in the freezer.. so I put it down and got a Zmax Pro.. GREAT phone but it cannot be rooted ( Screw You ZTE ) I want root.. so I'm willing to go back to whatever version of Android makes this device the most stable or this latest version.. as long as it can be rooted
Im still a rookie
raiderwill said:
is there any issue with rooting these later builds?
And.. Your talking to a guy that wipes his internal storage with each rom change..
So factory resetting is not an issue with me..
When these things updated back in sept/oct my n4 went from a perfectly working device to one that, i could pull it out and it would be shut off.. Then.. It got to a point it would not come back on without letting it set for a while.. Or needed to be cooled in the freezer.. So i put it down and got a zmax pro.. Great phone but it cannot be rooted ( screw you zte ) i want root.. So i'm willing to go back to whatever version of android makes this device the most stable or this latest version.. As long as it can be rooted
Click to expand...
Click to collapse
but i can root 6.0.1 CAN SOMEONE TELL ME WHAT TO DO
BUTLER613 said:
but i can root 6.0.1 CAN SOMEONE TELL ME WHAT TO DO
Click to expand...
Click to collapse
Disclaimer- Please try on your own risk i am not responsible for any damage of your device.
1-Flash twrp recovery in odin
2-Boot into twrp
3-Flash supersu.zip systemless latest in twrp
4-Reboot.
Enjoy root
Trex888 said:
Disclaimer- Please try on your own risk i am not responsible for any damage of your device.
1-Flash twrp recovery in odin
2-Boot into twrp
3-Flash supersu.zip systemless latest in twrp
4-Reboot.
Enjoy root
Click to expand...
Click to collapse
Did you tested with N910TUVS2EPK2 ??
yeah it flashed
Trex888 said:
Disclaimer- Please try on your own risk i am not responsible for any damage of your device.
1-Flash twrp recovery in odin
2-Boot into twrp
3-Flash supersu.zip systemless latest in twrp
4-Reboot.
Enjoy root
Click to expand...
Click to collapse
yeah it flashed okay but did not root phone
---------- Post added at 02:24 AM ---------- Previous post was at 02:11 AM ----------
becchir2003 said:
Did you tested with N910TUVS2EPK2 ??
Click to expand...
Click to collapse
but i will right now
---------- Post added at 02:27 AM ---------- Previous post was at 02:24 AM ----------
BUTLER613 said:
yeah it flashed okay but did not root phone
---------- Post added at 02:24 AM ---------- Previous post was at 02:11 AM ----------
but i will right now
Click to expand...
Click to collapse
thats what im running now
---------- Post added at 02:30 AM ---------- Previous post was at 02:27 AM ----------
help me
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
help me
---------- Post added at 02:34 AM ---------- Previous post was at 02:30 AM ----------
help me
---------- Post added at 03:02 AM ---------- Previous post was at 02:34 AM ----------
im using SM-N910T and having an issue with rooting . not sure if bootloader is unlock or not super su was flashed and no success. root checker says not rooted
BUTLER613 said:
yeah it flashed okay but did not root phone
---------- Post added at 02:24 AM ---------- Previous post was at 02:11 AM ----------
but i will right now
---------- Post added at 02:27 AM ---------- Previous post was at 02:24 AM ----------
thats what im running now
---------- Post added at 02:30 AM ---------- Previous post was at 02:27 AM ----------
help me
---------- Post added at 02:30 AM ---------- Previous post was at 02:30 AM ----------
help me
---------- Post added at 02:34 AM ---------- Previous post was at 02:30 AM ----------
help me
---------- Post added at 03:02 AM ---------- Previous post was at 02:34 AM ----------
im using SM-N910T and having an issue with rooting . not sure if bootloader is unlock or not super su was flashed and no success. root checker says not rooted
Click to expand...
Click to collapse
Flash this supersu.zip link below
After flash your device will reboot 2 times so dont freak out just let it boot completely.
Your bootloader is unlocked if it is locked you cannot able to flash twrp
https://mega.nz/#!XAsUjARJ!XqYZkle6wTarq1a8-zAnhwrbd4IdpzpJryNCAU3g9k4
I think we
trex888 said:
flash this supersu.zip link below
after flash your device will reboot 2 times so dont freak out just let it boot completely.
Your bootloader is unlocked if it is locked you cannot able to flash twrp
https://mega.nz/#!xasujarj!xqyzkle6wtarq1a8-zanhwrbd4idpzpjryncau3g9k4
Click to expand...
Click to collapse
thank you
it worked i will be consulting you from now on
thank you
What is the first
butler613 said:
thank you
it worked i will be consulting you from now on
thank you
Click to expand...
Click to collapse
what is the first thing i should do after rooting...
Can you please, please, please not upload anything to MEGA?
It makes it very hard for Linux/Firefox users, who just want to download the file directly, and use a download manager like DownThemAll to handle large downloads. I can't download anything from that Website.
mrrhq said:
Can you please, please, please not upload anything to MEGA?
It makes it very hard for Linux/Firefox users, who just want to download the file directly, and use a download manager like DownThemAll to handle large downloads. I can't download anything from that Website.
Click to expand...
Click to collapse
Download the mega app in pc or phone whatever you are using just register fot free and you will download faster and also you will get 50gb space for free upload.
BUTLER613 said:
what is the first thing i should do after rooting...
Click to expand...
Click to collapse
First before do anything make a back up in twrp of your current rom go to twrp and back up and backup ( boot/system/data/efs/modem). Then you can try things i mentioned below cuz if anything goes wrong you can easily restore your current backup rom without losing anything.
1,Uninstall bloatware system apps you dont use to make your device run more smoothly.
2, install adaway adblocker to disable adds in apps and browser.
4,install busybox to make root more stronger.
3,you can install xposed modules.
4,you can install lucky patcher to hack many games.
5,
And much more the lists are endless but be careful what you are doing and make sure to backup otherwise things can go wrong anytime try on your own risk.
Any issues running this on the N910T(NON 3 Version)
Simple .... Any issues running this rom on the N910T non N910T3 model? I had used a T3 rom in the past on my device which caused tons of issues.
Thanks
DirtySant0 said:
Simple .... Any issues running this rom on the N910T non N910T3 model? I had used a T3 rom in the past on my device which caused tons of issues.
Thanks
Click to expand...
Click to collapse
So far i did not have any issues with this firmware i am running from 4 days and no heating issues at all and games run butter smooth.
Make sure do clean install do factory reset before and after flash firmware you will get clean operating system.
Hope that helps
Trex888 said:
So far i did not have any issues with this firmware i am running from 4 days and no heating issues at all and games run butter smooth.
Make sure do clean install do factory reset before and after flash firmware you will get clean operating system.
Hope that helps
Click to expand...
Click to collapse
Thanks for the info. I always do resets after a major update to avoid any problems.
anywhere to download this other than mega?
bradsh1 said:
anywhere to download this other than mega?
Click to expand...
Click to collapse
Sammobiles.com/firmwares but you have to wait more then 3 hours to download.
Can you extract the modem and bootloader
Sent from my SM-N910T3 using XDA-Developers mobile app
Hello guys! I've followed the simple root tutorial found on XDA and i've managed to root my S5 with no problem (i don't have any knowledge about this stuff cause i am a newbie,sorry...). After that ,i've successfully flashed TWRP Recovery and tried several ROM's but every one of them failed (bootloop on RR, corrupted zip on Note 7 ROM etc),anyway,it was late and the next day i needed my phone so i installed the Official Stock S5 ROM (6.0.1) found on XDA also (flashed with Odin). The problem is, i can't root it anymore. When i try to do the exact same thing i did with auto-root and Odin everything works except SuperSU ("There is no SU binary installed and SuperSU cannot install it"). I've tried everything! And when i say everything , i mean it. Even KingRoot, wipping everything, trying to root again, the advices found on this thread https://forum.xda-developers.com/galaxy-s3/help/su-binary-installed-supersu-install-t1928764 and nothing works..if anyone can point me some directions , give some advices, i would be very happy! Thank you guys! I'm willing to try anything.
what baseband of 6.0.1 did you flash?
youdoofus said:
what baseband of 6.0.1 did you flash?
Click to expand...
Click to collapse
g900fxxu1cpb2
SNYNK said:
g900fxxu1cpb2
Click to expand...
Click to collapse
i think your firmware is too new. might want to find the oldest one on the same android version, flash it in Odin and go from there
---------- Post added at 04:37 PM ---------- Previous post was at 04:18 PM ----------
what country was it purchased for service with originally?
youdoofus said:
i think your firmware is too new. might want to find the oldest one on the same android version, flash it in Odin and go from there
---------- Post added at 04:37 PM ---------- Previous post was at 04:18 PM ----------
what country was it purchased for service with originally?
Click to expand...
Click to collapse
XXS1CPC8 will work?
youdoofus said:
i think your firmware is too new. might want to find the oldest one on the same android version, flash it in Odin and go from there
---------- Post added at 04:37 PM ---------- Previous post was at 04:18 PM ----------
what country was it purchased for service with originally?
Click to expand...
Click to collapse
Nevermind man, just flashed an old version of 6.0.1 and rooted like a charm. Thank you!
SNYNK said:
Nevermind man, just flashed an old version of 6.0.1 and rooted like a charm. Thank you!
Click to expand...
Click to collapse
not a problem! glad we got ya up and runnin