Database Users

Having problem rooting my Axon 7 A2017U

Hey guys, first of all sorry about my english, im french.
So my problem is: I tried rooting my Axon 7 A2017U many times, with different guides. I always end up with a softbricked phone, having to restore to stock using MiFlash.
My bootloader is unlocked, i have stock recovery and stock rom for now.
Whenever i flash TWRP, either the signed one (from @tenfar) or unsigned (and up to date) ones, i can't go past the menu saying something like "your phone cant be checked for corruption, please lock your phone [...]" it just freeze. i did read somewhere that i should flash chainfire's root or a special .zip that, i guess, disabled some check that could prevent booting a phone with unsigned stuff/edited system (after flashing TWRP, so it could boot) that didn't work out. i think i found that information in some LineageOS thread here on XDA.
My ultimate goal would be to get a rooted stock nougat 7.1.1, up to date TWRP recovery and to be able to switch to LineageOS to try it out soon.
For what it is worth, i rooted many phones over the years, so while i'm no expert, i should be able to follow most of the steps you give me.
Thanks alot!

What version of TWRP did you flash first?

I have the same root problem i can not install in twrp install in twrp ok but su application displays no root cause i have latest twrp

KwesiJnr said:
What version of TWRP did you flash first?
Click to expand...
Click to collapse
this
https://forum.xda-developers.com/axon-7/development/recovery-official-twrp-zte-axon-7-t3515715
And @tenfar's signed one

KwesiJnr said:
What version of TWRP did you flash first?
Click to expand...
Click to collapse
this
https://forum.xda-developers.com/axon-7/development/recovery-official-twrp-zte-axon-7-t3515715
And @tenfar's signed one

Okay. Download and flash this one alone via fastboot and see what happens. This is one the I personally use. It is required for any of the newer versions to work properly.
twrp-3.0.2-2-a2017u.img
You can choose to rename it to just recovery.img, then:
1. fastboot flash recovery recovery.img
or
2.
if you choose to work with the same filename:
fastboot flash recovery twrp-3.0.2-2-a2017u.img
Select reboot to recovery from the bootloader menu now and try again.
Either way, should work fine. I know you mentioned you knew the basics, but just want to be sure.
Also forgot to mention. If TWRP works but you still can't get your phone to boot, you need to follow this guide here
You can start from the part that says:
-----------------------------------------------------
UPDATING FROM B20_Boot / B20 / B27 / B29 / B15(N)
-----------------------------------------------------
Again, that's the ROM I personally use if I want to go back to stock, not the one from the ZTE site.

Gonna try it and give feedback. thanks for taking time to help!
edit: im downloading the rom from the link you shared.
like you said, i can get TWRP to boot but not the phone.
So if i use full stock from ZTE, it can't boot with modified recovery?
edit 2: i don't know what worked, i think it might be the bootstack. or the rom by DrakenFX. now i can boot to the rom with a TWRP recovery installed. It worked, but i soft bricked again trying to flash SuperSU. So now i'm retrying with an updated TWRP.

I haven't tried that yet, but I really suspect that's the reason you're having problems. I rarely use pure stock ROMs. Like you, I'm not an expert in Android Development so I can't tell you why. Just been a flashaholic for years so made a few observations.

Which supersu are you installing? If you're swiping to the right in twrp, you need to install the dm-verity zip or supersu 2.79. There's some issues with newer builds.

Everything is working like a charm! Now im going to finally give lineageOS a try
I used Chainfire's SuperSU 2.79 stable.
Edit : Everything is working flawlessly! I'm running the lastest LineageOS nightly with root (Chainfire's 2.79). Followed their instruction and installation was smooth as butter. I should also point out i flashed the lastest official TWRP which seems more stable than the one @KwesiJnr suggested. The one he suggested was giving me some "can't read X partition" in red text everywhere in the log section, which the official one doesn't do. It was doing his job properly anyway though.
I can't thank @KwesiJnr enough, it helped me find the single mistake i was making.

lololo2 said:
Everything is working like a charm! Now im going to finally give lineageOS a try
I used Chainfire's SuperSU 2.79 stable
Click to expand...
Click to collapse
Glad you're up and running root. :good:

lololo2 said:
Everything is working like a charm! Now im going to finally give lineageOS a try
I used Chainfire's SuperSU 2.79 stable.
Edit : Everything is working flawlessly! I'm running the lastest LineageOS nightly with root (Chainfire's 2.79). Followed their instruction and installation was smooth as butter. I should also point out i flashed the lastest official TWRP which seems more stable than the one @KwesiJnr suggested. The one he suggested was giving me some "can't read X partition" in red text everywhere in the log section, which the official one doesn't do. It was doing his job properly anyway though.
I can't thank @KwesiJnr enough, it helped me find the single mistake i was making.
Click to expand...
Click to collapse
Yeah, like I mentioned before that was the base TWRP you needed to flash first, before any of the newer ones. You weren't intended to use it indefinitely.
There's a lot of Dev love for our device now and support is growing ... exciting new ROMs cropping up. Don't hesitate to try them out.

Updating from Android 6.0.x to Pure Nexus(Andr. v7.1.2)(Without Flashing Stock Image)

Hello!
I'm currently running Android 6.0.1. I was planning on upgrading to Android 7.1.2 and installing Pure Nexus. So, I'm wondering If I have to install the stock image first or is there a way to just directly go to installing Pure Nexus? Maybe I could flash the radio and such separately. I'm not quite sure... Could someone help me out?

angelica_kh said:
Hello!
I'm currently running Android 6.0.1. I was planning on upgrading to Android 7.1.2 and installing Pure Nexus. So, I'm wondering If I have to install the stock image first or is there a way to just directly go to installing Pure Nexus? Maybe I could flash the radio and such separately. I'm not quite sure... Could someone help me out?
Click to expand...
Click to collapse
Download the latest Pure Nexus update from June, gapps, and the latest update of your preferred root tool (if you need root) onto your phone. Pure Nexus is not rooted from my understanding. Someone correct me if I am wrong. Download the June factory image onto your computer.
Backup your current rom in TWRP. Next, use fastboot to flash the bootloader, radio, and vendor images from the June factory image. You must update the vendor image each month that you update your custom rom, FYI. Follow this guide below to learn more regarding fastboot:
https://forum.xda-developers.com/showthread.php?t=3206928
Next, boot into TWRP again. Here, you will do a factory reset and wipe system then flash Pure Nexus, gapps and your root method (if you desire). Boot up and reinstall everything. You should be set from here.
Sent from my Nexus 5X using Tapatalk

Thanks. It worked! Now to figure out why Magisk is giving me a CTS Profile mismatch error....

angelica_kh said:
Thanks. It worked! Now to figure out why Magisk is giving me a CTS Profile mismatch error....
Click to expand...
Click to collapse
Flash Magisk 13 zip from xda and don't forget to turn on hide in settings. Also to certifie the playstore clear data and cache for it after.

Installing Resurrection Remix on Build A2017GV1.2.0B01

Hi there, I am looking to root my Axon 7 A2017G and install Resurrection Remix. I have only rooted Oneplus devices before so was looking for some help in the process. I understand that it involves unlocking the bootloader then installing TWRP which can then be used to flash the rom. Firstly it seems from this guide: https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379 that I will have to downgrade to marshmallow first in which case will the default MiFavor Updater detect the update if I simply downloader this one say: http://www.stechguide.com/download-b03-update-for-zte-axon-7-a2017geurope/ and place it in the root of the sdcard? Or will I have to flash that downgrade with the stock recovery?
Secondly in the package my device came in (ordered off AliExpress) it had a note that said this device couldn't be rooted as they had installed their own software, the only possible indication of this however is that the recovery is in chinese(?), I have included a picture. Should I be concerned about this?
Annnnd I can't actually think of a thirdly so thirdly just thanks for any help
Luke

It is just as simple as it can be:
Read and use the following thread:
https://forum.xda-developers.com/showthread.php?t=3573108

lukeshields said:
Hi there, I am looking to root my Axon 7 A2017G and install Resurrection Remix. I have only rooted Oneplus devices before so was looking for some help in the process. I understand that it involves unlocking the bootloader then installing TWRP which can then be used to flash the rom. Firstly it seems from this guide: https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379 that I will have to downgrade to marshmallow first in which case will the default MiFavor Updater detect the update if I simply downloader this one say: http://www.stechguide.com/download-b03-update-for-zte-axon-7-a2017geurope/ and place it in the root of the sdcard? Or will I have to flash that downgrade with the stock recovery?
Secondly in the package my device came in (ordered off AliExpress) it had a note that said this device couldn't be rooted as they had installed their own software, the only possible indication of this however is that the recovery is in chinese(?), I have included a picture. Should I be concerned about this?
Annnnd I can't actually think of a thirdly so thirdly just thanks for any help
Luke
Click to expand...
Click to collapse
No. Your phone is NOT an A2017G, it is an A2017!!! Be VERY careful! Why do you think they say that you can't root? for giggles? Look in the back of the phone, it should say the model. You will need to follow guides for the A2017, but I recommend that you download the latest official A2017 update zip, unpack it if needed (if you open the zip you downloaded and there's a PDF and an update.zip, take the update.zip), then take the update.zip and throw it in the root of the internal storage, otherwise throw the zip you downloaded if there's no update.zip. Then go to Update and update.
After that you'll have official A2017 firmware and you can use the guides

Help installing TWRP as zip file (no go through Fastboot)

I downgraded from custom Nougat to stock Marshmallow as I discovered that the incall sound (hearing the caller from the ear speaker) is louder and clearer, so of course I lost TWRP recovery and root in the process which is normal. However, I now can't re-install TWRP as a .img file since although I can boot into Android Recovery I can't go into Fastboot mode (phone just re-starts every time) so of course it's no go whether I try Axon Toolkit or ADB via computer. I also tried the EDL route but same thing.
I have all the required ZTE and Qualcom drivers installed. My phone's model is the 2017G and the bootloader is still unlocked.
Only thing I can try is installing TWRP as a zip file through Android Recovery or directly from 'system update' via the phone's menu. Problem is I can't find a zip version of TWRP for the Axon 7
Any help/suggestions most grateful.

xectis said:
I downgraded from custom Nougat to stock Marshmallow as I discovered that the incall sound (hearing the caller from the ear speaker) is louder and clearer, so of course I lost TWRP recovery and root in the process which is normal. However, I now can't re-install TWRP as a .img file since although I can boot into Android Recovery I can't go into Fastboot mode (phone just re-starts every time) so of course it's no go whether I try Axon Toolkit or ADB via computer. I also tried the EDL route but same thing.
I have all the required ZTE and Qualcom drivers installed. My phone's model is the 2017G and the bootloader is still unlocked.
Only thing I can try is installing TWRP as a zip file through Android Recovery or directly from 'system update' via the phone's menu. Problem is I can't find a zip version of TWRP for the Axon 7
Any help/suggestions most grateful.
Click to expand...
Click to collapse
If you can use miflash there is a thread somewhere that has stock everything with twrp included. I'm on my phone so I can't find it right now. But if you can't find it by the time I get to my computer I'll look through my history to try and find it.

JTruj1ll0923 said:
If you can use miflash there is a thread somewhere that has stock everything with twrp included. I'm on my phone so I can't find it right now. But if you can't find it by the time I get to my computer I'll look through my history to try and find it.
Click to expand...
Click to collapse
Thanks for the response. I looked around for the thread you mentioned but had no luck in finding it yet but I'll keep looking meantime.
Thanks

xectis said:
Thanks for the response. I looked around for the thread you mentioned but had no luck in finding it yet but I'll keep looking meantime.
Thanks
Click to expand...
Click to collapse
So the thread I found was actually not for the g model sadly. But, have you seen this thread?
https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547/page10
Down a ways there is a "TWRP flashable bootstack/stock system images" section. I think if you can flash those (maybe with miflash?) You should then have fastboot available to flash twrp again.

When you unlocked surely you learned how to use the tools to flash twrp without fastboot.
You can use miflash, the toolkit, tenfar's tool or tenear's tool.
There's a million and one guides on how to to this plus the actual tool threads.
Even the twrp thread has a guide.

JTruj1ll0923 said:
So the thread I found was actually not for the g model sadly. But, have you seen this thread?
https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547/page10
Down a ways there is a "TWRP flashable bootstack/stock system images" section. I think if you can flash those (maybe with miflash?) You should then have fastboot available to flash twrp again.
Click to expand...
Click to collapse
I took a look. Not sure which version I should download. Am on B10 and that section only has bootstack versions up to B9. Does it matter which one I choose or should I get the closest which is B9. Also, should I install the stock system that goes with the bootstack version or just the bootstack.
Thanks for the link.

xectis said:
I took a look. Not sure which version I should download. Am on B10 and that section only has bootstack versions up to B9. Does it matter which one I choose or should I get the closest which is B9. Also, should I install the stock system that goes with the bootstack version or just the bootstack.
Thanks for the link.
Click to expand...
Click to collapse
Okay so since I was not paying that much attention (sorry) I just realized that those are bootstacks and stock systems that you can flash in TWRP. My bad. But I have been looking around and on that thread I just had you go to he mentions another thread with step by steps that may help you! Here it is. Good luck!

xectis said:
I took a look. Not sure which version I should download. Am on B10 and that section only has bootstack versions up to B9. Does it matter which one I choose or should I get the closest which is B9. Also, should I install the stock system that goes with the bootstack version or just the bootstack.
Thanks for the link.
Click to expand...
Click to collapse
JTruj1ll0923 said:
Okay so since I was not paying that much attention (sorry) I just realized that those are bootstacks and stock systems that you can flash in TWRP. My bad. But I have been looking around and on that thread I just had you go to he mentions another thread with step by steps that may help you! Here it is. Good luck!
Click to expand...
Click to collapse
Ignore the fastboot part. Just reinstall twrp with axon7tool, then install raystef66's TWRP flashable B09 bootstack and stocksystem zips (plus magisk if you won't relock), then follow his guide on how to get rid of the 5 seconds screen to get fastboot and, well, get rid of the 5 seconds screen
p.s. I basically just found out that I said the exact same thing on that crappy Q&A thread...

Choose an username... said:
Ignore the fastboot part. Just reinstall twrp with axon7tool, then install raystef66's TWRP flashable B09 bootstack and stocksystem zips (plus magisk if you won't relock), then follow his guide on how to get rid of the 5 seconds screen to get fastboot and, well, get rid of the 5 seconds screen
p.s. I basically just found out that I said the exact same thing on that crappy Q&A thread...
Click to expand...
Click to collapse
The link you provided is titled 'Get TWRP and root after updating to Nougat'. As am on Marshmallow I'll have to first update to Nougat? . So do I go ahead and flash stock Nougat from ZTE's page before following the instructions on that page? Sorry for my confusion.
**Update** I followed instructions of link you provided to install TWRP but I came to a brick wall every time. Short story is no matter what I tried I cannot install anything with either ADB, Miflash or Axon Toolkit. The big problem here is the Fastboot issue which otherwise would make things so much easier. Only thing left for me to do is just to upgrade stock firmwares via the phone's update option and remain bootloader unlocked. The Axon 7 is still a great phone, it's just too much hustle getting things done so I'll just have to sell it. Samsung and HTC phones are much easier to work with when it comes to rooting/installing custom ROMs.
***Update 2*** Success!! I managed to install fastboot/bootloader mode by following the section 'Get Fastboot' from that same link you provided so now I have latest TWRP installed and the 5 second notice has also disappeared. Am back in the running now. Many thanks for your help

xectis said:
The link you provided is titled 'Get TWRP and root after updating to Nougat'. As am on Marshmallow I'll have to first update to Nougat? . So do I go ahead and flash stock Nougat from ZTE's page before following the instructions on that page? Sorry for my confusion.
**Update** I followed instructions of link you provided to install TWRP but I came to a brick wall every time. Short story is no matter what I tried I cannot install anything with either ADB, Miflash or Axon Toolkit. The big problem here is the Fastboot issue which otherwise would make things so much easier. Only thing left for me to do is just to upgrade stock firmwares via the phone's update option and remain bootloader unlocked. The Axon 7 is still a great phone, it's just too much hustle getting things done so I'll just have to sell it. Samsung and HTC phones are much easier to work with when it comes to rooting/installing custom ROMs.
***Update 2*** Success!! I managed to install fastboot/bootloader mode by following the section 'Get Fastboot' from that same link you provided so now I have latest TWRP installed and the 5 second notice has also disappeared. Am back in the running now. Many thanks for your help
Click to expand...
Click to collapse
You could have bricked your device. I specifically told you not to follow that part. Also what has adb, axon7toolkit and miflash got to do with that guide? You have to use axon7tool just like a) it says there and b) i told you on the q&a thread

Choose an username... said:
You could have bricked your device. I specifically told you not to follow that part. Also what has adb, axon7toolkit and miflash got to do with that guide? You have to use axon7tool just like a) it says there and b) i told you on the q&a thread
Click to expand...
Click to collapse
Yes you did warn me about the fastboot part but I was stuck as nothing else worked. By using the Fastboot instructions I managed to install TWRP and root the phone. I used Miflash to install the fastboot package which was successful. Now I can boot to Fastboot and bootloader via TWRP. Remember am on Marshmallow so I guess that helped not to brick the phone? I don't know but it worked.

xectis said:
Yes you did warn me about the fastboot part but I was stuck as nothing else worked. By using the Fastboot instructions I managed to install TWRP and root the phone. I used Miflash to install the fastboot package which was successful. Now I can boot to Fastboot and bootloader via TWRP. Remember am on Marshmallow so I guess that helped not to brick the phone? I don't know but it worked.
Click to expand...
Click to collapse
Well again, if you want to be on Nougat, download raystef66's flashable B09 bootstack and stocksystem, flash them on TWRP with Magisk 15.2, and follow his guide on how to get rid of the 5 seconds screen (all in twrp, don't get out of it).
Just do all of that or you'll lose fastboot. Also that zip that you got from that ancient guide doesn't work on anything else than Marshmallow

Choose an username... said:
Well again, if you want to be on Nougat, download raystef66's flashable B09 bootstack and stocksystem, flash them on TWRP with Magisk 15.2, and follow his guide on how to get rid of the 5 seconds screen (all in twrp, don't get out of it).
Just do all of that or you'll lose fastboot. Also that zip that you got from that ancient guide doesn't work on anything else than Marshmallow
Click to expand...
Click to collapse
Thanks for the advice. If I keep the phone I'll wait for a stable Oreo update. Nougat didn't impress me much.

Downgrading firmware from Nougat to Marshmallow

Hi,
I have a Nexus 6P that has Android 7.1.2 (N2G47W) installed. I've just unlocked the bootloader, installed TWRP then installed Magisk 16.0 for root.
I'd like to next downgrade from Nougat to Marshmallow. Are there any steps to do so? Can I just boot to TWRP, and immediately install the factory image from https://developers.google.com/android/images#angler?
Or are there any additional steps I need to take?

@goister You can't with TWRP download marshmallow from Google API site. Maybe do a good wipe in TWRP before hand of course back up anything important on comouter. Then follow the hiesenberg guide for returning to stock. Your in luck cause I've read with being on the latest Oreo can no longer return to marshmallow or nougat though I haven't verified myself. Best of luck mate.

Exodusche said:
@goister You can't with TWRP download marshmallow from Google API site. Maybe do a good wipe in TWRP before hand of course back up anything important on comouter. Then follow the hiesenberg guide for returning to stock. Your in luck cause I've read with being on the latest Oreo can no longer return to marshmallow or nougat though I haven't verified myself. Best of luck mate.
Click to expand...
Click to collapse
Hi,
Not sure I get your post. My Nexus 6P is stock except for an unlocked bootloader, TWRP and Magisk root. Are you saying follow the guide at https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 specifically step 10. How To Flash The Factory Images (And Return To Stock)?

goister said:
Hi,
Not sure I get your post. My Nexus 6P is stock except for an unlocked bootloader, TWRP and Magisk root. Are you saying follow the guide at https://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928 specifically step 10. How To Flash The Factory Images (And Return To Stock)?
Click to expand...
Click to collapse
That's exactly what I'm saying unless you want to flash a marshmallow ROM. Then you can use TWRP but would still need 6.0 gapps and a computer to fastboot flash MM bootloader of that months build. MM vendor could be flashed by either fastboot or TWRP. Your best to download a MM build from Google site. Then unzip that folder and inside unzip again. You will get all the bootloader, vendor (radio optional) you will need for that months MM build. Then follow the guide from hiesenberg for returning to stock . Best to put all the images files and fastboot in the folder that is suggested in the guide . That way you can copy and paste the commands as written on the guide. There might be a flash all bat file you can use in the stock folder but not sure if MM had that I never used. If you have any more questions feel free to ask.

Yes I intend to flash the stock Marshmallow ROM from https://developers.google.com/android/images#angler specifically the latest one (MTC20L). My end goal is a rooted Nexus 6P with the MTC20L firmware. Wouldn't the stock Google build already have gapps? I don't intend to use a 3rd party ROM.

goister said:
Yes I intend to flash the stock Marshmallow ROM from https://developers.google.com/android/images#angler specifically the latest one (MTC20L). My end goal is a rooted Nexus 6P with the MTC20L firmware. Wouldn't the stock Google build already have gapps? I don't intend to use a 3rd party ROM.
Click to expand...
Click to collapse
Yes that's right gapps not needed with stock. Wasn't sure on your level of experience so mentioned that with a ROM you would need gapps of that android version . If I where you I would back up my phone completey and wipe everything in TWRP including internal before hand. So many times files get left behind especially using different versions of android to avoid any issues. Be warned though wiping internal includes pictures, downloads, music, documents etc.

Exodusche said:
Yes that's right gapps not needed with stock. Wasn't sure on your level of experience so mentioned that with a ROM you would need gapps of that android version . If I where you I would back up my phone completey and wipe everything in TWRP including internal before hand. So many times files get left behind especially using different versions of android to avoid any issues. Be warned though wiping internal includes pictures, downloads, music, documents etc.
Click to expand...
Click to collapse
Thanks. I've no issues wiping the phone as this is pretty much a fresh phone. There's nothing to even back up. The only thing I've done so far beyond rooting, was to import a certificate into /system. I suppose a factory reset would delete this certificate and bring it back to stock (but rooted)? Or should I wipe with TWRP instead?
Looking at the zip file of the stock ROM, here's what I see
bootloader-angler-angler-03.54.img
flash-all.bat
flash-all.sh
flash-base.sh
image-angler-mtc20l
radio-angler-angler-03.61.img
After wiping with TWRP, would I be able to run flash-all?
Edit: I've just TWRP wiped everything, and rebooted. However, the device is stuck at the initial "Google" screen with the lock icon at the button. How long is it supposed to take to boot up after a full TWRP wipe?

OK I solved the problem. Apparently if you reboot after the flash, you need to disconnect the USB cable, else it will boot loop.