Related
Hello good night, I bought a Chinese smartwatch, the N10b that I will leave in photos with thermometer, barometer etc. I wanted to install a new ROM (FIRMWARE), the RWatch R11 and installed but the touch is not working and I want to go back to the previous one, and I can not find it anywhere, it's the "M80C_KSKJ_N10B.FN3.V002", I need help please , excuse me, I am from Argentina, I am eternally grateful if you can help me.
Hola buenas noches, me compre un smartwatch chino, el N10b que dejare en fotos con termómetro, barómetro etc. Quise instalar una nueva ROM (FIRMWARE), la del Rwatch R11 y se instalo pero no funciona el táctil y quiero volver a la anterior, y no la encuentro por ningún lado, es la "M80C_KSKJ_N10B.FN3.V002", necesito ayuda por favor, disculpen mi ingles soy de Argentina, estoy eternamente agradecido si me pueden ayudar.
Can you install another firmware? I have the same clock
Hi maybe someone can help me.
My android head unit CML-PLAY 8702 is not working properly, something wrong with sound..turning volume up or down it disappears same with touch screen or remote control (radio, sd card or youtube).
Thanks.
Hola aver si me pueden ayudar. Formatie mi radio por error. Y esta en un idioma que no conozco. Como puedo hacer para de jarla en español. Saludos
Hello, does anyone know the procedure to root the Junsun V1pro 4G + 64G CarPlay Android 9.0 DSP device?
or if it is possible to install TWRP Recovery ?.
apparently it is a too new version and I can hardly find any information or firmware. Does anyone know this device and could help me?.
I leave you some photos of it.
https://drive.google.com/file/d/1SdvGPIuCNmLJEyVjwzyuUv2pTqx8E1_f/view?usp=sharing
https://drive.google.com/file/d/1mVPpY3BYOfMVjQ_0f83_UJcj9q2310LD/view?usp=sharing
https://drive.google.com/file/d/1M3LlaijsBsd_voG-wn4UBLgL5TB7detp/view?usp=sharing
https://drive.google.com/file/d/1KQ3wo1rlVjE-1vkBsXyI2BT6UmwXH0MY/view?usp=sharing
https://drive.google.com/file/d/1Col6WMtNp74DElVbf8zUU2q6e-x_nLPx/view?usp=sharing
Greetings to all and thanks.
Hola @alberto 755,
Tengo la misma radio, pero la verdad que estoy completamente perdido sobre como "rooterarla". Estoy usando la radio con un Golf 7, pero tengo muchos problemas con el canbus... algunos accesorios del coche no funcionan. Me podrías ayudar sobre su uso?. Muchas gracias!!!
-----------------------------------
Hi @alberto 755!!!,
I have the same radio too, but I'm complete lost about how to root it. I'm using this radio with a VW Golf 7, and I have a lot of issues with the canbus... some of the car original accessories doesn't works. Could you help me about how to use this unit?. Thanks a lot!
102649259 said:
Extract the contents of the file to a clean flash drive (FAT32).
Click to expand...
Click to collapse
Thank you for your reply @102649259!!!,
Sorry about the question, obviously I'm not an expert about android radios. If I load this ROM version, can this fix my problem with the canbus of my VW Golf 7?. I tried 2 canbus, one of RAISE and the other of HIWORLD. The best results I had it with the HIWORLD, but is not complete compatible with my car.
It is possible to load Android 10 to this radio?
Thank you!
Hola. gracias a todos y siento la tardanza en contestar . @monopilot veras yo estaba igual que tu he ido probando algunas cosas y solventando los problemas sobre la marcha...
empezando por el principio:
en mi caso solo me interesaba el root pero al buscar información sobre el dispositivo no aparece demasiada, y la que aparece tanto en este foro de Xda-deverlopers como en el foro ruso 4pda.ru para mi es muy confusa ya que al parecer hay múltiples dispositivos que parecen compartir similitudes.
Por este motivo me producía mucho temor el flashear algún update modificado con root y que al no ser del todo compatible consiguiese un boatloop. (O tal vez una inscripción roja permanente en pantalla como indican en algunos post por instalar por error un update compatible pero de otro fabricante).
Primero opte por lo mas fácil pero tras intentar comunicarme con el vendedor este no esta dispuesto a facilitarme el firmware de mi dispositivo por lo que no podría recuperarlo de una forma fácil si cometía algún error.
bien llegados a este punto estuve realizando múltiples pruebas, y descubrí que tal vez fue por cuestión de suerte pero el dispositivo si permite el reinicio en modo Fastboot desde el terminal emulator a pesar de no disponer de derechos root, para ello es tan simple como instalar la aplicación y teclear "reboot bootloader" tras pulsar enter el dispositivo reiniciar en modo Fastboot y lo comprobamos por las letras situadas en la esquina superior izquierda.
https://drive.google.com/file/d/1vIE9TQHu5-XF7Ljc0VyITqQUubk7IWsw/view?usp=sharing
Una vez descubierto esto estuve buscando por internet algún método de procedimiento para poder extraer el boot.bin a través de ADB shell utilizando el comando Cat (si se que es necesario root para ello pero aun así quería probar.. y efectivamente continúe con mucha suerte ya que conseguí extraer el boot.img desde mi propio dispositivo.)
Finalmente tras ello copie a la memoria interna del dispositivo el boot,img extraído anteriormente e instale la ultima versión de magisk manager.apk para parchear dicho archivo y flashear desde el pc usando Fastboot con el comando “Fastboot flash boot boot.img” tras ello cruce los dedos en el reinicio y todo salió bien tenia mi Stock ROM con root y magisk funcionando perfectamente.
¡¡Nota!!para poder conectar el dispositivo al pc por medio de Fastboot es necesario cambiar el tipo de conexión USB host para ello vamos a ajustes/sistema/opciones de desarrollo (código 3368) y en la esquina superior derecha pulsamos sobre los puntos y aparece el “submenú” Usb Mode en idioma chino cambiamos al de debajo y ya podemos conectar el USB del dispositivo con el USB del pc usando un cable USB tipo A-A con sus 2 puntas macho.
https://drive.google.com/file/d/1XCEJtNNWEuMSCWTc1aC2T2xzitc3N2go/view?usp=sharing
(nota.!!muy importante al terminar volver a dejar el usb host en su primera opción sino no funcionaran los usb conectados ya que quedarían configurados para conexión a pc).
En cuanto a tu pregunta sobre el canbus yo también he tenido problemas.(en mi caso el equipo lo tengo montado en un Ford Focus) y lo único que he podido realizar es ir probando diferentes configuraciones a partir del menú “ajustes de Fabrica/Selección de modelo” (el código de acceso es 3368) hay están las diferentes configuraciones Can bus para indicarle al dispositivo cual tienes instalado en mi caso he ido probando hasta dar con el más adecuado ya que no he encontrado mucha más información así que siento no poder ayudarte más.
@102649259 gracias por tu ayuda y el archivo facilitado, aunque encontré el método expuesto.
a pesar de ser mucho más complejo quizás a alguien le pueda ayudar esta información.
Os dejo unas web de ejmplos con información sobre la extracción del boot.img a través de ADB (por la red hay mucha información al respecto).
https://www.cnblogs.com/shangdawei/p/4514128.html
http://gadget-tweak.blogspot.com/p/how-to-pullextract-boot-recovery-system.html
por ultimo dejo un .rar tanto con las herramientas ADB/Fastboot junto con sus drivers el archivo Boot.img original y parcheado con magisk de mi dispositivo por si a alguien pudiese ayudarle en algún momento solo tendría que flashear a través de fastboot.
https://drive.google.com/file/d/12TN65jI9p7EpEs9sBo06PO3x6BD8z735/view?usp=sharing
un saludo y muchas gracias a todos por la ayuda.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hi. Thank you all and I am sorry for the delay in answering. @monopiLoT you will see I was just like you I have been trying some things and solving problems on the go ...
starting at the beginning:
in my case I was only interested in the root but when looking for information about the device it does not appear too much, and the one that appears both in this Xda-deverlopers forum and in the Russian forum 4pda.ru for me is very confusing since apparently there are multiple devices that seem to share similarities.
For this reason, I was very afraid to flash a modified update with root and that being not completely compatible,would get a bootloop. (Or perhaps a permanent red inscription on the screen as indicated in some post for mistakenly installing a compatible update but from another manufacturer).
First opt for the easiest but after trying to communicate with the seller, he is not willing to provide me with the firmware of my device so I could not recover it easily if I made a mistake.
Well arrived at this point I was conducting multiple tests, and I discovered that maybe it was a matter of luck but the device does allow the restart in Fastboot mode since terminal emulator despite not having root rights, for this it is as simple as installing the application and type "reboot bootloader" after pressing enter the device will restart in Fastboot mode and we check it by the letters located in the upper left corner
https://drive.google.com/file/d/1vIE9TQHu5-XF7Ljc0VyITqQUubk7IWsw/view?usp=sharing
Once this was discovered I was searching the internet for some method of procedure to be able to extract the boot.bin through the ADB shell using the Cat command (yes I know that root is necessary for it but I still wanted to try .. and effectively I continued with great luck since I managed to extract the boot.img from my own device.)
Finally, after that, copy the boot, img previously extracted, to the internal memory of the device and install the latest version of magisk manager.apk to patch this file and flash from the pc using Fastboot with the command "Fastboot flash boot boot.img" after it I crossed my fingers on the restart and everything went well I had my Stock ROM with root and magisk working perfectly.
Note !! In order to connect the device to the PC through Fastboot it is necessary to change the type of USB host connection. To do this, go to settings / system / development options (code 3368) and in the upper right corner click on the and the Usb Mode “submenu” appears in Chinese language. We change to the one below and we can now connect the USB of the device with the USB of the PC using a USB type AA cable with its 2 male ends.
https://drive.google.com/file/d/1XCEJtNNWEuMSCWTc1aC2T2xzitc3N2go/view?usp=sharing
(note. !! very important when you finish leaving the host usb in its first option if the connected usb will not work since they would be configured for connection to a pc).
As for your question about the canbus, I have also had problems (in my case I have it mounted on a Ford Focus) and the only thing I have been able to do is try different configurations from the menu “Factory settings / Selection model ”(the access code is 3368) there are the different Can bus configurations to indicate to the device which one you have installed in my case I have been trying to find the most suitable since I have not found much more information so I am sorry I cannot help you more.
@ 102649259 thanks for your help and the provided file, although I found the exposed method.
Despite being much more complex, perhaps someone can help with this information.
I leave you some example websites with information on the extraction of boot.img through ADB (there is a lot of information about it on the network).
https://www.cnblogs.com/shangdawei/p/4514128.html
http://gadget-tweak.blogspot.com/p/how-to-pullextract-boot-recovery-system.html
finally I leave a .rar both with the ADB / Fastboot tools along with its drivers the original Boot.img file and patched with magisk of my device in case anyone could help you at some point I would only have to flash through fastboot.
https://drive.google.com/file/d/12TN65jI9p7EpEs9sBo06PO3x6BD8z735/view?usp=sharing
greetings and thank you all very much for the help.
Hi guys,
I am also the owner of Junsun V1 pro 4G + 64G.
Thanks for sharing your experience with this device,
Do you also have a bluetooth problem?
I have one that I can only pair one device at a time. In addition, it happens that after pairing the phone, all contacts are lost.
Hi @grzech666.
If I also ran into the same problem when trying to link the OBD to use torque. in my case when entering Factory Setting (code 3368) of the last options in the list, OBD was in the off state, I changed it to on and now it allows me the connection, try it.
As for the deletion of contacts, this has not happened to me.
Anyway, I am still trying to get the vendor to provide me with the firmware of my device. If I can get it, I will upload it in this post in case it can help someone.
Greetings.
Thanks for replying,
About software, I already get it from my supplier but I was afraid to use it. If you are interested, I can put it on my Google drive or samwere else.
grzech666 said:
Thanks for replying,
About software, I already get it from my supplier but I was afraid to use it. If you are interested, I can put it on my Google drive or samwere else.
Click to expand...
Click to collapse
yes please!
yes please.
if you can provide a download link along with a photos of your system to ensure compatibility before installing.
you it I would be very grateful.
Note!!in the MCU section The model number G23 or G32 is very important since installing a different version can produce brick very difficult to recover.
my device information:
https://drive.google.com/file/d/1SdvGPIuCNmLJEyVjwzyuUv2pTqx8E1_f/view
https://drive.google.com/file/d/1kuthqiR1Opz8HdnmGnQ3ZOAERMpx39a6/view?usp=sharing
https://drive.google.com/file/d/1mVPpY3BYOfMVjQ_0f83_UJcj9q2310LD/view
Screens of my unit you can find here:
https://forum.xda-developers.com/showpost.php?p=82670707&postcount=16
let me know if you want more info
I also uploaded mentioned firmware:
https://drive.google.com/file/d/1Zja9xorBD1NLnDd7kBC3HX6XrwRJNmcf/view?usp=sharing
grzech666 said:
Screens of my unit you can find here:
https://forum.xda-developers.com/showpost.php?p=82670707&postcount=16
let me know if you want more info
I also uploaded mentioned firmware:
https://drive.google.com/file/d/1Zja9xorBD1NLnDd7kBC3HX6XrwRJNmcf/view?usp=sharing
Click to expand...
Click to collapse
Thank you very much for the firmware, the devices are identical.
Although my device is updated to date 05-03-2020, makes me think if that could be the reason for your problems with OBD contacts and connection?
continue with the problem ?.
Have you tried checking for updates through the device?.
Regards, and thank you very much.
Does anybody know if it is possible to flash an original joying firmware on this unit?
alberto 755 said:
Hola. gracias a todos y siento la tardanza en contestar . @monopilot veras yo estaba igual que tu he ido probando algunas cosas y solventando los problemas sobre la marcha...
empezando por el principio:
en mi caso solo me interesaba el root pero al buscar información sobre el dispositivo no aparece demasiada, y la que aparece tanto en este foro de Xda-deverlopers como en el foro ruso 4pda.ru para mi es muy confusa ya que al parecer hay múltiples dispositivos que parecen compartir similitudes.
Por este motivo me producía mucho temor el flashear algún update modificado con root y que al no ser del todo compatible consiguiese un boatloop. (O tal vez una inscripción roja permanente en pantalla como indican en algunos post por instalar por error un update compatible pero de otro fabricante).
Primero opte por lo mas fácil pero tras intentar comunicarme con el vendedor este no esta dispuesto a facilitarme el firmware de mi dispositivo por lo que no podría recuperarlo de una forma fácil si cometía algún error.
bien llegados a este punto estuve realizando múltiples pruebas, y descubrí que tal vez fue por cuestión de suerte pero el dispositivo si permite el reinicio en modo Fastboot desde el terminal emulator a pesar de no disponer de derechos root, para ello es tan simple como instalar la aplicación y teclear "reboot bootloader" tras pulsar enter el dispositivo reiniciar en modo Fastboot y lo comprobamos por las letras situadas en la esquina superior izquierda.
https://drive.google.com/file/d/1vIE9TQHu5-XF7Ljc0VyITqQUubk7IWsw/view?usp=sharing
Una vez descubierto esto estuve buscando por internet algún método de procedimiento para poder extraer el boot.bin a través de ADB shell utilizando el comando Cat (si se que es necesario root para ello pero aun así quería probar.. y efectivamente continúe con mucha suerte ya que conseguí extraer el boot.img desde mi propio dispositivo.)
Finalmente tras ello copie a la memoria interna del dispositivo el boot,img extraído anteriormente e instale la ultima versión de magisk manager.apk para parchear dicho archivo y flashear desde el pc usando Fastboot con el comando “Fastboot flash boot boot.img” tras ello cruce los dedos en el reinicio y todo salió bien tenia mi Stock ROM con root y magisk funcionando perfectamente.
¡¡Nota!!para poder conectar el dispositivo al pc por medio de Fastboot es necesario cambiar el tipo de conexión USB host para ello vamos a ajustes/sistema/opciones de desarrollo (código 3368) y en la esquina superior derecha pulsamos sobre los puntos y aparece el “submenú” Usb Mode en idioma chino cambiamos al de debajo y ya podemos conectar el USB del dispositivo con el USB del pc usando un cable USB tipo A-A con sus 2 puntas macho.
https://drive.google.com/file/d/1XCEJtNNWEuMSCWTc1aC2T2xzitc3N2go/view?usp=sharing
(nota.!!muy importante al terminar volver a dejar el usb host en su primera opción sino no funcionaran los usb conectados ya que quedarían configurados para conexión a pc).
En cuanto a tu pregunta sobre el canbus yo también he tenido problemas.(en mi caso el equipo lo tengo montado en un Ford Focus) y lo único que he podido realizar es ir probando diferentes configuraciones a partir del menú “ajustes de Fabrica/Selección de modelo” (el código de acceso es 3368) hay están las diferentes configuraciones Can bus para indicarle al dispositivo cual tienes instalado en mi caso he ido probando hasta dar con el más adecuado ya que no he encontrado mucha más información así que siento no poder ayudarte más.
@102649259 gracias por tu ayuda y el archivo facilitado, aunque encontré el método expuesto.
a pesar de ser mucho más complejo quizás a alguien le pueda ayudar esta información.
Os dejo unas web de ejmplos con información sobre la extracción del boot.img a través de ADB (por la red hay mucha información al respecto).
https://www.cnblogs.com/shangdawei/p/4514128.html
http://gadget-tweak.blogspot.com/p/how-to-pullextract-boot-recovery-system.html
por ultimo dejo un .rar tanto con las herramientas ADB/Fastboot junto con sus drivers el archivo Boot.img original y parcheado con magisk de mi dispositivo por si a alguien pudiese ayudarle en algún momento solo tendría que flashear a través de fastboot.
https://drive.google.com/file/d/12TN65jI9p7EpEs9sBo06PO3x6BD8z735/view?usp=sharing
un saludo y muchas gracias a todos por la ayuda.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hi. Thank you all and I am sorry for the delay in answering. @monopiLoT you will see I was just like you I have been trying some things and solving problems on the go ...
starting at the beginning:
in my case I was only interested in the root but when looking for information about the device it does not appear too much, and the one that appears both in this Xda-deverlopers forum and in the Russian forum 4pda.ru for me is very confusing since apparently there are multiple devices that seem to share similarities.
For this reason, I was very afraid to flash a modified update with root and that being not completely compatible,would get a bootloop. (Or perhaps a permanent red inscription on the screen as indicated in some post for mistakenly installing a compatible update but from another manufacturer).
First opt for the easiest but after trying to communicate with the seller, he is not willing to provide me with the firmware of my device so I could not recover it easily if I made a mistake.
Well arrived at this point I was conducting multiple tests, and I discovered that maybe it was a matter of luck but the device does allow the restart in Fastboot mode since terminal emulator despite not having root rights, for this it is as simple as installing the application and type "reboot bootloader" after pressing enter the device will restart in Fastboot mode and we check it by the letters located in the upper left corner
https://drive.google.com/file/d/1vIE9TQHu5-XF7Ljc0VyITqQUubk7IWsw/view?usp=sharing
Once this was discovered I was searching the internet for some method of procedure to be able to extract the boot.bin through the ADB shell using the Cat command (yes I know that root is necessary for it but I still wanted to try .. and effectively I continued with great luck since I managed to extract the boot.img from my own device.)
Finally, after that, copy the boot, img previously extracted, to the internal memory of the device and install the latest version of magisk manager.apk to patch this file and flash from the pc using Fastboot with the command "Fastboot flash boot boot.img" after it I crossed my fingers on the restart and everything went well I had my Stock ROM with root and magisk working perfectly.
Note !! In order to connect the device to the PC through Fastboot it is necessary to change the type of USB host connection. To do this, go to settings / system / development options (code 3368) and in the upper right corner click on the and the Usb Mode “submenu” appears in Chinese language. We change to the one below and we can now connect the USB of the device with the USB of the PC using a USB type AA cable with its 2 male ends.
https://drive.google.com/file/d/1XCEJtNNWEuMSCWTc1aC2T2xzitc3N2go/view?usp=sharing
(note. !! very important when you finish leaving the host usb in its first option if the connected usb will not work since they would be configured for connection to a pc).
As for your question about the canbus, I have also had problems (in my case I have it mounted on a Ford Focus) and the only thing I have been able to do is try different configurations from the menu “Factory settings / Selection model ”(the access code is 3368) there are the different Can bus configurations to indicate to the device which one you have installed in my case I have been trying to find the most suitable since I have not found much more information so I am sorry I cannot help you more.
@ 102649259 thanks for your help and the provided file, although I found the exposed method.
Despite being much more complex, perhaps someone can help with this information.
I leave you some example websites with information on the extraction of boot.img through ADB (there is a lot of information about it on the network).
https://www.cnblogs.com/shangdawei/p/4514128.html
http://gadget-tweak.blogspot.com/p/how-to-pullextract-boot-recovery-system.html
finally I leave a .rar both with the ADB / Fastboot tools along with its drivers the original Boot.img file and patched with magisk of my device in case anyone could help you at some point I would only have to flash through fastboot.
https://drive.google.com/file/d/12TN65jI9p7EpEs9sBo06PO3x6BD8z735/view?usp=sharing
greetings and thank you all very much for the help.
Click to expand...
Click to collapse
Hello @alberto 755,
thank you for your write-up. Can you share how you were able to extract boot.img from your unit.
I tried through adb shell but failed without read permission.
Hello. I am glad I found some information about this unit I was following price drops on Aliexpress.
I am looking for the plastic frame version for my peugeot 206cc. Junsun seems to mount same V1 pro 4+64 for all the car versions.
Firmware and root are some of my concerns but the procedure appears to be like standard for phones using magisk method, it is a relieve to know from you that because I did it before for tablets and phones and it is pretty straight forward and easy to archieve.
About the read/write permissions problem may be with sudo plus chmod could do the trick before extracting the boot img, I don't know but there are a lot of magisk procedure information over there and it sholud not be a headache at all.
The question I have for you users from this radio isn't about software but sound and FM. I am from Spain and FM Radio is really a concern to me, for the work over all.
- About the Radio: I want to know how well it performs scan, RDS, AF mode and reception.
- I am going to replace the whole speaker system, it sounds bad for the music I listen to and the old Clarion RD3 DSP doesn't perform many options to get clean lows. Death, black, doom metal is really dificult to adjust with standard settings. What do you think if I get some Alpine good stuff speakers with sepparated ways for the 17 cm front and 10 cm rear speakers? Could I connect an active sobwoofer like those flat from Pioneer or Kenwood? I mean, the RCA out could archieve the sobwoofer out?
I was about to buy a Pioneer SPH-10BT instead an Android Unit because in the past i have troubles with other AHU and this Pioneer sure it makes its job really good. I just want to know if I am going to do a good purchase in the terms of audio quality. In the end, the sound is what most matters.
Thank you for your attention, kind regards
Root can be attained by Magisk patched boot.img but it will mute apps that utilize Google TTS, examples Google Maps, Assistant and Waze. I read somewhere Play store will have problem as well (I didn't test that).
If you are really into sound quality and radio reception, you should pass on this android unit. I have used 2 android units before this one and they sound much better and autoscan picked up all stations.
Autoscan with this unit picks up zero station, I have to manually input the station frequency and it sounds soft and mono. Switching from stereo and mono makes no difference.
I've stopped using the built-in radio and rely on tune-in app permanently, even that doesn't sound as good as before.
You should read how owners have tried to change the built-in amp and radio chip to get better sound, https://4pda.ru/forum/index.php?showtopic=938749&st=5800
Contrary to the Junsun Aliexpress ads, the RCA cable come without mic input. The seller tells me the unit don't support external mic input, the internal mic has improved and unit "updated". So far, voice command and phone calls are okay with normal road noise.
I run focal speakers with DLS Ultimate A3 in the front and an active subwoofer through the RCA subwoofer output in the trunk.
Regarding internal microphone I wasn't happy with them. Fortunately my units came with cable for external mic. I bought additional mic and installed it, now voice is much better.
gpmg762 said:
Root can be attained by Magisk patched boot.img but it will mute apps that utilize Google TTS, examples Google Maps, Assistant and Waze. I read somewhere Play store will have problem as well (I didn't test that).
If you are really into sound quality and radio reception, you should pass on this android unit. I have used 2 android units before this one and they sound much better and autoscan picked up all stations.
Autoscan with this unit picks up zero station, I have to manually input the station frequency and it sounds soft and mono. Switching from stereo and mono makes no difference.
I've stopped using the built-in radio and rely on tune-in app permanently, even that doesn't sound as good as before.
You should read how owners have tried to change the built-in amp and radio chip to get better sound, https://4pda.ru/forum/index.php?showtopic=938749&st=5800
Contrary to the Junsun Aliexpress ads, the RCA cable come without mic input. The seller tells me the unit don't support external mic input, the internal mic has improved and unit "updated". So far, voice command and phone calls are okay with normal road noise.
I run focal speakers with DLS Ultimate A3 in the front and an active subwoofer through the RCA subwoofer output in the trunk.
Click to expand...
Click to collapse
Thank you about the sound opinion, is my most important concern, also FM reception is very important to me, as I said because the work. So I am going to boy a good Alpine or Pioneer stereo sigle DIN and just using Android auto or Pioneer sync app it would do the job. The only thing I could gain with AHU is a bigger display (altough worse than my phone resolution of course and I think they are not good with sun brightness reflections no matter how much chinese cheap IPS has). I keep thinking on SPH-10BT or similar.
Hi! I have a Junsun V1 PRO, 4GB/64GB WI-FI+4G.
It's a fake Android 9.0 it comes with API 27.
I ask to the AliExpress seller and he send to me a .bin file to solve it ¿????
It's a bin file called "Solve MCU error.bin" and the size is only 131kb, so I'm not sure if it will solve anything jajajja
So I don't know if try to flash it or not. If you want it, ask for it privately but I'm not responsible if you break your unit.
I have problems to autostart apps. I want to autostart "Radardroid" and "Blockada" but I think that it only autostart the last used app.
I solved the problem of loosing contacts disabling the Google synch.
Do you know how to change/move/replace the icons on the first screen?
And any way to change the "voice search" button (selected via wheel buttons settings) to "Google Assistant"?
Any app recommendations to use FM? I don't like the one that comes with the head unit.
Thank you!!
Enviado desde mi MI 9 mediante Tapatalk
View attachment 5062851View attachment 5062849
chemixzgz said:
Thank you about the sound opinion, is my most important concern, also FM reception is very important to me, as I said because the work. So I am going to boy a good Alpine or Pioneer stereo sigle DIN and just using Android auto or Pioneer sync app it would do the job. The only thing I could gain with AHU is a bigger display (altough worse than my phone resolution of course and I think they are not good with sun brightness reflections no matter how much chinese cheap IPS has). I keep thinking on SPH-10BT or similar.
Click to expand...
Click to collapse
I have since found Poweramp as an alternative for default radio and audio player replacement while researching USB audio and DSD. I recommend digital radio if mobile data usage is not restricted.
I am getting a matte tempered glass screen protector to cut down the sun's reflection.
The SPH-10BT will sound better, it's a proper head-unit after all.
Hello everyone,
I bought this box: https://a.aliexpress.com/_mOaTBl9 and update the version of it after that we cant connect the wifi, when I try to connect any wifi I type the password and touch connect button it show wifi search screen and cant connect.
anyone can help me?
My car is Citroen C5 Aircross 2019
the version I use:
PC new firmware download link: https://drive.google.com/drive/folders/1AlJ5FpCTPq47nx24q8DxJismK57x1GkW?usp=sharing
PC upgrade guide:
Ai Box PC.pdf
drive.google.com
U disk upgrade, new firmware download link:
upgrade_pkg.zip
drive.google.com
U Disk Upgrade Guide:
Ai Box upgrade guide.pdf
drive.google.com
System version number: 20210310
Release Notes:
1. Add Turkish
2Optimize google login
3.21 Audi models support
4. Nissan car-machine connection support
5. Optimize the display number of Bluetooth phones in third-party applications
6. Porsche 21 taycan connection support
7. Skoda 21 connection support
Yusufcivirr said:
Hello everyone,
I bought this box: https://a.aliexpress.com/_mOaTBl9 and update the version of it after that we cant connect the wifi, when I try to connect any wifi I type the password and touch connect button it show wifi search screen and cant connect.
anyone can help me?
My car is Citroen C5 Aircross 2019
the version I use:
PC new firmware download link: https://drive.google.com/drive/folders/1AlJ5FpCTPq47nx24q8DxJismK57x1GkW?usp=sharing
PC upgrade guide:
Ai Box PC.pdf
drive.google.com
U disk upgrade, new firmware download link:
upgrade_pkg.zip
drive.google.com
U Disk Upgrade Guide:
Ai Box upgrade guide.pdf
drive.google.com
System version number: 20210310
Release Notes:
1. Add Turkish
2Optimize google login
3.21 Audi models support
4. Nissan car-machine connection support
5. Optimize the display number of Bluetooth phones in third-party applications
6. Porsche 21 taycan connection support
7. Skoda 21 connection support
Click to expand...
Click to collapse
I had similar box and wifi did not work exactly the same. Upon boot up, the wifi is off, you turn on and it searches forever. Wifi module must be bad as i checked and it was physically connected with wire to board.
Hola buenas tardes soy nuevo en el foro, Daniel es mi nombre! queria hacer una consulta haber si me pueden ayudar, el dia de hoy actualize mi ai box CP600 con ios 9 4/64 y tengo el problema que enciendo el vehiculo y muchas veces o la mayoria no me toma el carplay inalambrico donde me aparace en pantalla para volver a conectar o entrar en modo android. envio fotos. Espero me pueden ayudar
danidedoc said:
Hola buenas tardes soy nuevo en el foro, Daniel es mi nombre! queria hacer una consulta haber si me pueden ayudar, el dia de hoy actualize mi ai box CP600 con ios 9 4/64 y tengo el problema que enciendo el vehiculo y muchas veces o la mayoria no me toma el carplay inalambrico donde me aparace en pantalla para volver a conectar o entrar en modo android. envio fotos. Espero me pueden ayudar
Click to expand...
Click to collapse
Ios 9 . Speak english
yuri76 said:
Ios 9 . Habla
Click to expand...
Click to collapse
Hola, buenas tardes, soy nuevo en el foro, ¡me llamo Daniel! Quería hacerte una pregunta si puedes ayudarme, hoy actualicé mi ai box CP600 con ios 9 4/64 y tengo el problema de que enciendo el vehículo y muchas veces o la mayoría de las veces no me lleva el Carplay inalámbrico donde aparece en la pantalla para volver a conectarse o ingresar al modo Android. Envío fotos. Espero qu
yuri76 said:
Ios 9 . Speak english
Click to expand...
Click to collapse
Hello, good afternoon, I'm new to the forum, Daniel is my name! I wanted to ask a question if you can help me, today I updated my ai box CP600 with ios 9 4/64 and I have the problem that I turn on the vehicle and many times or most of the time it does not take me the wireless carplay where it appears on the screen to reconnect or enter android mode. I send photos. I hope you can help me
danidedoc said:
Hola, buenas tardes, soy nuevo en el foro, ¡me llamo Daniel! Quería hacerte una pregunta si puedes ayudarme, hoy actualicé mi ai box CP600 con ios 9 4/64 y tengo el problema de que enciendo el vehículo y muchas veces o la mayoría de las veces no me lleva el Carplay inalámbrico donde aparece en la pantalla para volver a conectarse o ingresar al modo Android. Envío fotos. Espero qu
Hello, good afternoon, I'm new to the forum, Daniel is my name! I wanted to ask a question if you can help me, today I updated my ai box CP600 with ios 9 4/64 and I have the problem that I turn on the vehicle and many times or most of the time it does not take me the wireless carplay where it appears on the screen to reconnect or enter android mode. I send photos. I hope you can help me
Click to expand...
Click to collapse
The CP600P is not a 4/64gb but a 4/32G. What update do you have?
can anybody help me Is there the possibility of having an application installed and changing the icon and the name but system ...? My intention is to install two WhatsApp on the phone but one WhatsApp is also hidden from the system and I can't find a way to do it. If I install ogwhatsapp on the system, I get that it is installed. Can't extract the application and change the installation icon to make it look like another application.? because if I use an application to hide it, I get the name in the system of the installed application that hides it and they are also suspicious names such as privateme or galerian. the only one I found is the audiomanager peo or also called hide it pro but it needs root permissions ...
cielorazzo_ said:
can anybody help me Is there the possibility of having an application installed and changing the icon and the name but system ...? My intention is to install two WhatsApp on the phone but one WhatsApp is also hidden from the system and I can't find a way to do it. If I install ogwhatsapp on the system, I get that it is installed. Can't extract the application and change the installation icon to make it look like another application.? because if I use an application to hide it, I get the name in the system of the installed application that hides it and they are also suspicious names such as privateme or galerian. the only one I found is the audiomanager peo or also called hide it pro but it needs root permissions ...
Click to expand...
Click to collapse
- You can go to Settings, search for Dual apps and install Whatsapp as dual app (dual WA must be using another phone number)
- By using Settings, AppLock, protect your dual WA from opening by someone else
- Remove the icon for dual WA from home-screen and use some app that creates a shortcut instead
Not fully what you wanted but kind of
zgfg said:
- Puede ir a Configuración, buscar aplicaciones duales e instalar Whatsapp como aplicación dual (WA dual debe estar usando otro número de teléfono)
- Al usar Configuración, AppLock, proteja su WA dual para que no lo abra otra persona
- Elimine el icono de WA dual de la pantalla de inicio y use alguna aplicación que cree un acceso directo en su lugar
No del todo lo que querías, pero una especie de
Click to expand...
Click to collapse
zgfg said:
- You can go to Settings, search for Dual apps and install Whatsapp as dual app (dual WA must be using another phone number)
- By using Settings, AppLock, protect your dual WA from opening by someone else
- Remove the icon for dual WA from home-screen and use some app that creates a shortcut instead
Not fully what you wanted but kind of
Click to expand...
Click to collapse
The intention is good but it does not work because if I install or create from the option of xiaomi dual app it appears to me that it creates another WhatsApp ... and there must be no trace of the second WhatsApp installed ... I still cannot. I am thinking of rotating the xiaomi mi 9t so that I can install hide it pro but I read that the process to rotate the mi 9t is not easy ... I have to open the bootloader ... do you know any reliable and well-guided tutorial to rotate my device ?
cielorazzo_ said:
The intention is good but it does not work because if I install or create from the option of xiaomi dual app it appears to me that it creates another WhatsApp ... and there must be no trace of the second WhatsApp installed ... I still cannot. I am thinking of rotating the xiaomi mi 9t so that I can install hide it pro but I read that the process to rotate the mi 9t is not easy ... I have to open the bootloader ... do you know any reliable and well-guided tutorial to rotate my device ?
Click to expand...
Click to collapse
You cannot have two Whatsapp apps connected to the same account, that's why I suggested Dual Whatsapp
Otherwise you don't need Dual WA but protect your original WA by AppLock and remove its icon, make a shortcut instead
---
There is also Second Space option in MIUI - you crete a second user on your phone with his own pin/password and his own apps
But it terribly slows down the Mi 9T (at least with my 6 GB) - not recommended
--
You wrote 'rotating' but you probably meant rooting - it's not a problem
But you must first apply for unlocking Bootloader. Unlocking BL is the same for AFAIK all Xiaomi phones, hence it doesn't matter if you find a guide for another model
You will need to create Mi account and once you apply, you will have to wait 168 hr = 7 days
After that you can unlock BL but it will Factory reset your phone.
Settings, Mi account provides a good backup/restore to mske it easier to restore upon Factory resetting
Once you come to that point you can easily install Magisk, to have root (I'll give you instructions if you would need)
I tried the second space but it does not work because the notifications from my main WhatsApp do not reach the new space. and it also consumes a lot of battery. When you tell me to use applock, do you mean blocking xiaomi applications or are you talking about an application? I only need to fear two whatsapp, one is the official one that my family uses and the other is a whatsapp that has another phone number but I don't want the system settings or battery consumption to show me that another WhatsApp installed is running in the background it is understood ? so if I install ogwhatsapp or any other whatsapp mod whenever I go settings I see it installed ... thanks for your help
zgfg said:
No puede tener dos aplicaciones de Whatsapp conectadas a la misma cuenta, por eso sugerí Dual Whatsapp
De lo contrario, no necesita Dual WA, pero proteja su WA original con AppLock y elimine su icono, cree un acceso directo en su lugar
---
También hay la opción Second Space en MIUI: creas un segundo usuario en tu teléfono con su propio pin / contraseña y sus propias aplicaciones
Pero ralentiza terriblemente el Mi 9T (al menos con mis 6 GB), no recomendado
-
Escribió 'rotar' pero probablemente se refería a rootear, no es un problema
Pero primero debe solicitar el desbloqueo de Bootloader. Desbloquear BL es el mismo para AFAIK todos los teléfonos Xiaomi, por lo tanto, no importa si encuentra una guía para otro modelo
Deberá crear una cuenta Mi y, una vez que presente la solicitud, deberá esperar 168 horas = 7 días.
Después de eso, puede desbloquear BL pero restablecerá su teléfono de fábrica.
Configuración, Mi cuenta proporciona una buena copia de seguridad / restauración para facilitar la restauración al restablecer la configuración de fábrica
Una vez que llegue a ese punto, puede instalar Magisk fácilmente, para tener root (le daré instrucciones si lo necesita)
Click to expand...
Click to collapse
Probé el segundo espacio pero no funciona porque las notificaciones de mi WhatsApp principal no llegan al nuevo espacio. y además consume mucha batería. Cuando me dices que use applock, ¿te refieres al bloqueo de aplicaciones xiaomi o estás hablando de una aplicación? Solo necesito temer dos whatsapp, uno es el oficial que usa mi familia y el otro es un whatsapp que tiene otro número de teléfono pero no quiero que la configuración del sistema o el consumo de batería me muestren que otro WhatsApp instalado se está ejecutando el trasfondo se entiende? así que si instalo ogwhatsapp o cualquier otro mod de whatsapp cada vez que voy a la configuración, lo veo instalado ... gracias por tu ayuda
zgfg said:
You cannot have two Whatsapp apps connected to the same account, that's why I suggested Dual Whatsapp
Otherwise you don't need Dual WA but protect your original WA by AppLock and remove its icon, make a shortcut instead
---
There is also Second Space option in MIUI - you crete a second user on your phone with his own pin/password and his own apps
But it terribly slows down the Mi 9T (at least with my 6 GB) - not recommended
--
You wrote 'rotating' but you probably meant rooting - it's not a problem
But you must first apply for unlocking Bootloader. Unlocking BL is the same for AFAIK all Xiaomi phones, hence it doesn't matter if you find a guide for another model
You will need to create Mi account and once you apply, you will have to wait 168 hr = 7 days
After that you can unlock BL but it will Factory reset your phone.
Settings, Mi account provides a good backup/restore to mske it easier to restore upon Factory resetting
Once you come to that point you can easily install Magisk, to have root (I'll give you instructions if you would need)
Click to expand...
Click to collapse
I tried the second space but it does not work because the notifications from my main WhatsApp do not reach the new space. and it also consumes a lot of battery. When you tell me to use applock, do you mean blocking xiaomi applications or are you talking about an application? I only need to fear two whatsapp, one is the official one that my family uses and the other is a whatsapp that has another phone number but I don't want the system settings or battery consumption to show me that another WhatsApp installed is running in the background it is understood ? so if I install ogwhatsapp or any other whatsapp mod whenever I go settings I see it installed ... thanks for your help
cielorazzo_ said:
Probé el segundo espacio pero no funciona porque las notificaciones de mi WhatsApp principal no llegan al nuevo espacio. y además consume mucha batería. Cuando me dices que use applock, ¿te refieres al bloqueo de aplicaciones xiaomi o estás hablando de una aplicación? Solo necesito temer dos whatsapp, uno es el oficial que usa mi familia y el otro es un whatsapp que tiene otro número de teléfono pero no quiero que la configuración del sistema o el consumo de batería me muestren que otro WhatsApp instalado se está ejecutando el trasfondo se entiende? así que si instalo ogwhatsapp o cualquier otro mod de whatsapp cada vez que voy a la configuración, lo veo instalado ... gracias por tu ayuda
I tried the second space but it does not work because the notifications from my main WhatsApp do not reach the new space. and it also consumes a lot of battery. When you tell me to use applock, do you mean blocking xiaomi applications or are you talking about an application? I only need to fear two whatsapp, one is the official one that my family uses and the other is a whatsapp that has another phone number but I don't want the system settings or battery consumption to show me that another WhatsApp installed is running in the background it is understood ? so if I install ogwhatsapp or any other whatsapp mod whenever I go settings I see it installed ... thanks for your help
Click to expand...
Click to collapse
Of course that notifications for main WA do not come to Second Space / second user.
Again, I'm telling you, you need two WA accounts (one for the main user, another for second user in Second space)
If you want to use single WA account - I absolutely don't know how could you do that and don't ask me (in that case both WA will see same calls and same chats, hence absolutely no point of 'giding')
I don't know how is AppLock named in your language (Spanish?), but in English it is exactly AppLock. Open Settings and type in AppLock and search, Settings will show you where it is
But again, if you somehow want to have two instances of WA using the same account - I think it's not pissible and hence I will no more respond, you have to play yourself
zgfg said:
Por supuesto que las notificaciones para WA principal no llegan al segundo espacio / segundo usuario.
Nuevamente, te digo que necesitas dos cuentas WA (una para el usuario principal, otra para el segundo usuario en el segundo espacio)
Si desea usar una sola cuenta de WA, absolutamente no sé cómo podría hacerlo y no me pregunte (en ese caso, ambos WA verán las mismas llamadas y los mismos chats, por lo tanto, no tiene ningún sentido 'giding')
No sé cómo se llama AppLock en su idioma (¿español?), Pero en inglés es exactamente AppLock. Abra Configuración y escriba AppLock y busque, Configuración le mostrará dónde está
Pero nuevamente, si de alguna manera desea tener dos instancias de WA usando la misma cuenta, creo que no es posible y, por lo tanto, no responderé más, debe jugar usted mismo.
Click to expand...
Click to collapse
zgfg said:
Of course that notifications for main WA do not come to Second Space / second user.
Again, I'm telling you, you need two WA accounts (one for the main user, another for second user in Second space)
If you want to use single WA account - I absolutely don't know how could you do that and don't ask me (in that case both WA will see same calls and same chats, hence absolutely no point of 'giding')
I don't know how is AppLock named in your language (Spanish?), but in English it is exactly AppLock. Open Settings and type in AppLock and search, Settings will show you where it is
But again, if you somehow want to have two instances of WA using the same account - I think it's not pissible and hence I will no more respond, you have to play yourself
Click to expand...
Click to collapse
I don't know if I'm explaining myself wrong or not understood. of course I don't want to have two whatsapp with the same phone number. What I want is to have two whatsapp in a single space of the phone, I mean the main one. but that only a single WhatsApp is shown in the system and installed applications. the other whatsapp that installs yansea ogwhatsapp or whatsapppluss even if I install it and configure it with applock and block it, I get the same in installed applications so it does not work because you can see it installed. I appreciate your help anyway thank you very much I will keep looking for a way
cielorazzo_ said:
I don't know if I'm explaining myself wrong or not understood. of course I don't want to have two whatsapp with the same phone number. What I want is to have two whatsapp in a single space of the phone, I mean the main one. but that only a single WhatsApp is shown in the system and installed applications. the other whatsapp that installs yansea ogwhatsapp or whatsapppluss even if I install it and configure it with applock and block it, I get the same in installed applications so it does not work because you can see it installed. I appreciate your help anyway thank you very much I will keep looking for a way
Click to expand...
Click to collapse
I don't know about yansea ogwhatsapp or whatsapppluss
But if they work as WA for different account I still don't see why you couldn't use dual WA instead.
Anyaway, you can use AppLock to protect access to either dual WA or those your custom WA apps
And you have more options if you root the phone
But I never needed or tried anything like that - to hide some apps, particularly WA from myself- in 99,5% I use my phone myself, and in the remaining 0,5% if my wife takes the phone, I don't need to hide any WA communication from her
I don't know why you need that hiding. Sorry for the illustration (I don't see a better example), if you cheat your wife, use some exotic messaging app with your girlfriend like Signal or Discord. If your wife find it, she won't know what is that app (and you can still additionally protect opening that app by AppLock)
I have no better idea and cannot help you more. Gave you some ideas, you can play with.
And if you want root - for the beginning apply for unlocking the Bootloader
Just don't cheat on friend, be honest - if you want to start different relationship, just end the one you are in right now, don't be a d1ckhe4d