The "UniversalAndroot-1.6.2-beta5.apk" didn't work for me.
What should I try next?
Follow this
http://wiki.cyanogenmod.com/index.php?title=ZTE_Blade:_Full_Update_Guide
Then flash the custom rom of your choice.
Edit: or if you just want root...no custom rom try visionary.
http://android.modaco.com/content/h...m/320722/19-nov-r14-visionary-one-click-root/
Sent from my HTC Desire using XDA App
OMg thanks a lot I have the same problem on my new EU ZTE v9, tried all root variations and only z4root's temp root worked, I looked for a temprootonboot app, and here is that, great!
Debrand Yoigo ZTE Blade - Orange led to Green Man
Hi,
I followed the instructions here:
chrislowthian.co.uk/how-to-unlock-de-brand-and-root-the-zte-blade-orange-san-francisco/1824
Which an xda-developer forum discussion member suggested.
I tried it and when rebooting at the end, I was stuck at the green man.
I can still enter Clockworkmod Recovery by holding volume down at boot.
Is there a different r8_update or r* debranding .zip file I should use for Yoigo, instead of the one there linked for De-Orange-ifying? Does it matter?
Also, before I tried to rebrand, I backed up my ROM with ROM Manager.
I think I see that file is advanced-recovery in the clockworkmod recovery screen. However, it asks if I want to Which option should I choose in my case that might give my back my entire system in the quickest and safest way possible?
Should I use that advanced-restore, (and then choose which of these: restore boot, system, data, cache, sd-etx?), or should I use non-advanced restore, or restore zip from sd card -> install /sdcard/update.zip (what is that?) ?
And then, when I have my phone back, what debranding ROM can I properly use for Yoigo?
Thanks!
Gary
Yeah, z4 root (here: http://android.modaco.com/content/zte-blade-blade-modaco-com/337262/permanent-root-for-2-2-blades/ for 2.2 blade) seems to be the easiest way to root it.
adaptive1: Have you fixed your phone ? (and don't post your problem in more than one thread, it is useless ...)
Otherwise, I'm not sure but I think you should use non-advanced restore.
You can try to follow this : http://android.modaco.com/content/z...-custom-rom-on-the-zte-u-v880-or-gen2-device/
Hey if youre in the same problem try this
http://android.modaco.com/topic/337262-permanent-root-for-22-blades/
You should check out this thread:
http://forum.xda-developers.com/showthread.php?p=19047321#post19047321
Hi there xda members! i recently bought this alcatel pop c7 (1gb ram version) and like many others i soft bricked it - boot loop - while trying to install a ported miui, that was not good for my phone. So for 8 almost full days, im trying to recover my phone. Tryed every solution that i found here on xda and also other forums. At some point my phone wasnt even charging itself.
I have to mention that my phone was rooted and i have CWM 5.5.0.4 on it ( thanks to you guyz) . But cwm was of no use, backup restoration was of no use.
Finally found out a solution that created a biger problem for me (maybe this will help other users that have the boot loop issue) From the root request thread alcatel pop c7, i found about Cherry Mobile Fuze custom roms, and genesis did work. My phone boots now, it works fine, connects tot the internet but i have no sim detected, no imei and even mtk droid tools and imei generator didnt help (i think its because of the rom that is dual sim, on a single sim phone).
But as the thread from root request alcatel pop c7 sayd ( page 7 post 52) i had to replace boot img from stock and build.prop. Boot img was easy to find, build.prop not. So i took boot img from stock rom (posted here on xda, but bad scatter files) and build.prop i took from the first ported miui rom that bricked my phne. It boots now but no imei. mtk droid tools and imei generator aren't working, but the tutorials with mobile uncle tools, entering engineer mode and writing some comands there, that i think it may solve my phone, but too bad , my new rom has no engineering mode apk.
So im asking the xda comunity, is my phone done? is it gone? can i do something about it ?
Can i get a stock build.prop (maybe that was the problem)?. In my opinion i have a few options but dont know how to proceed in these cases : flash the stock rom (no good stock rom backup untill now, i have downloaded tons of backups) flash engineer mode to change those imeis (didnt find how to do it) use one touch upgrade to force update my phone to stock (is there any way to fool OTU that my phone has an older version of android or no version at all? are there a thing in build.prop that modified can make my phone seem outdated) and lastly a good build.prop.
Sorry for the long post, i wouldnt ever have bothered xda if i was not desperate (usually i find answers to my questions, but now nothing worked)
and also thank you in advance for reading, posting a comment , anything that can help me in my problem. Maybe the trick with genesis rom can unbrick others people alcatel pop c7 phones, but beware, imei may be gone after that.
help !!!
Can anybody help me please???
Alcatel Pop C7 stock Rom.
DragonfO said:
Can anybody help me please???
Click to expand...
Click to collapse
If your interested in unbricking your phone msg me on Instagram @Shevii_1.
Alcatel OT POP C7 (7041x) [BACKUPS/ROOT/CWM/TWRP/TOOLS/DRIVER] [STOCK & MIUI V5 ROMs]
Last Update: Mon. AUG-03-2015
Hello,
I had bricked my "just" 4 hours old C7 a week ago because i was stupid enough to delete the custpacks from root and /system folders without even making a backup.
I had not flashed CWM and only rooted the device with RomasterSu_2.1.4 (aka iROOT, some Chinese one-click root / KingUser app) and i could not revive the phone through MTK Tools, Mobile Upgrade S or adb shell (either device not recognized or it couldn't push files, giving errors).
Today i got a new one, and hell i have not made the same mistake again.
After i unboxed the phone i immediately went into stock recovery and made a backup!
Secondly, i rooted the phone with RomasterSu and installed Uncle MTK Tools and made a IMEI backup (Just incase).
And lastely, i flashed CWM through Uncle and made a Full Backup of the current rom.
For anyone who happens to play with a rooted C7 on stock rom and accidentally bricked it, i will provide my Stock and CWM Backup Recovery's for anyone to use.
note: If you already flashed a custom recovery onto your device (e.g; CWM), the stock backup becomes obsolete! Use CWM instead.
[INFO]
Model: Alcatel One Touch 7041x
Firmware: 4.2.2
Baseband: MOLY.WR8.W1315.MD.WG.MP.V7
Kernel: 3.4.5
Build: 01003
Stock Recovery (Data) Backup (.backup):
- userdata_20100101_000117.backup (.rar / 83MB)
Place Stock Backup (Unpacked) into the root folder of your sdcard.
Reboot phone, Vol+&Power into stock recovery and select "restore user data" (or something alike) and select the .backup file.
New googledrive uploads:
-MIUI V5 (4.8.29) ROM (.zip)
-RootMaster / iRoot & SU (.apk)
-Uncle MTK Tools (.apk)
-CWM & TWRP Recovery (.img)
-Mobile Upgrade S (.exe)
-One Touch Center (.exe)
-USB Drivers (.rar)
-MTK DroidTools (Windows) (.zip)
-SP Flash Tools (.rar)
If you're familiar with flashing, i'd guess installing these files and how to use them propertly are self explainatory.
If not, you can ask me how to write a proper guide...
==============================================================================================================
--UPDATE--
I provided a stock rom and a MiUI V5 rom for people who don't want or prefer to use backup's. A custom Recovery is needed and will not work with stock recovery.
This is a vanila stock rom without the custpack games/apps bloatware. IIRC this rom is already rooted, but if not, you can always use iROOT.
Bare in mind that it's based on the first TCT Firmware build 01001 and not the latest Firmware Upgrade 01003.
The MiUI V5 rom is based on miui 4.8.29 (Jellybean 4.2).
Also, the installers are in Spanish and you can only select a handfull system languages for both roms, but atleast you can use these roms in English.
Both roms work absolutely fine, and faster than stock with custpack bloatware.
Stock (01001) ROM:
https://drive.google.com/file/d/0B_pc8K917q22RlJWNllGV2JLOVE/view?pli=1***
MIUI V5 (4.8.29) ROM:
http://www.mediafire.com/download/9l49h7gisxslx2s/Miui+v5+spanish.Alcatel+7041x.zip***
---UPDATE--- [AUG-03-2015]
KitKat 4.4.x Alcatel C7 (7041x):https://translate.googleusercontent...2.html&usg=ALkJrhh-v6soAAT7XuUrpiK_zGh5bODHaA***
*** I have not uploaded these ROMs, nor am i responsible for any damages or errors that might occur during flash, use at own risk and always make a backup first!
Making any custom changes to your device will void your warranty!
Bump Update!
Added files to google drive;
-MIUI V5 ROM (4.8.29) (.zip)
-RootMaster / iRoot & SU (.apk)
-Uncle MTK Tools (.apk)
-CWM & TWRP Recovery (.img)
-Mobile Upgrade S (.exe)
-One Touch Center (.exe)
-USB Drivers (.rar)
-MTK DroidTools (Windows) (.zip)
- SP Flash Tools (.rar)
https://drive.google.com/folderview?id=0B52SB5R_clyUVTNwVHlwMHpCZWM&usp=sharing
S5 7041X Rom
http://www.htcmania.com/showthread.php?t=976259
How to install stock ROM with Mobile Upgrade S,when installed custom CWM?How back to stock CWM?Mobile Upgrade S does not recognize the phone with custom CWM.Phone must be flashed with SP Flash Tool.After this,Mobile Upgrade S,recognizes phone.
_jussyy said:
http://www.htcmania.com/showthread.php?t=976259
Click to expand...
Click to collapse
Nice ROM,but it kills the battery.
mugy said:
Nice ROM,but it kills the battery.
Click to expand...
Click to collapse
Most roms need some time to settle, after 1 or 2 complete charges your battery should behave normally.
You can also use the 'Greenify' (Permit SU access) to blacklist any app that uses wakelocks or running backround processes.
This will save you some battery...
My best bet is going for the MiUiv5, which always ran fine when i used to own the C7. Never had any issues with that ROM other than a occasional 'SystemUi stopped working' when trying to use the Rom's OTA.
I installed CWM 5.5.0.4 but cannot see internal storage
Do you have any idea?
erdemdengel said:
I installed CWM 5.5.0.4 but cannot see internal storage
Do you have any idea?
Click to expand...
Click to collapse
A bit late but that's because I don't own the C7 anymore and hardly pay attention to these threads anymore, I'm sorry...
I have no idea why it would'nt show up in CWM. I always use TWRP on any device that has it's compatibility over CWM, mainly because of it's touch functions and ext partitioning functions. Normally your internal storage is sdcard0 and your SD is sdcard1, select "mount/unmount" to see whether it's listed or not (I guess you already did that obviously but still....) It should be listed, if not, reflash CWM (try latest available for the tct/alcatel, i don't know which build number out top of my head, or TWRP.
I suggest to switch to TWRP and most likely your problem will be solved.
I don't know where you got your recovery files, but the ones I got in my googledrive are guaranteed working since I tried them both before uploading, if you used my CWM try to reflash it with MobileUncle MTK Tools, but than again pick TWRP instead .
Sent from my ACER LIQUID Z500 using XDA Free mobile app
Bump Update
Sent from my HTC One using XDA Free mobile app
I tried to use both the CWM and TWRP recoveries and neither worked. When it tries to boot into them it just glitches out the boot screen and resets. I flashed them with Flashify if that's a problem. My tablets model is a P310A. So this is the right thread for it right?
It does the same thing when I flash with Uncle MTK Tools.
Update: So it seems that you need to use this recovery if you have a P310A. Sorry for the pointless bump.
White sreen when flashed
After I flash my phone I get white screen logo whitescreen logo etc.
I have the alcatel 7041x
Alcatel one touch pop C7 ,Dutch
It functional in 7040e?
Not reading us b
I can't download backup file
@dragonivell
No! 7041x only. If it would, i would've stated it at the "device compatibility list" (which doesn't exist in this topic, for that reason!)
@pricklain
I'm sorry, somehow the file got removed from my gdrive. Since I don't own this particular device anymore, i cannot re-upload the file in question.
Also, i'm unable to edit the OP for some reason, so i understand any complains about the backup file(s).
Note: I am hardly online on xda these days, so forgive me if my response is a bit late...
@jachthond
Heb je wat meer details wat er niet lukt met flashen, en welke files je daarvoor gebruikt hebt? Mischien kan ik je er door heen loodsen.
Nobody has to Alcatel One Touch Fierce 7024w ?
links please
Ebom
Because this thread was the first one I completly read and looked at many time again, I post my results in short here.
Its posible to "flash" or "download" the KitKat rom from Hungary (or whereever the rom came from) onto a stock Alcatel OT POP C7 (7041X). Note the X, I have only that phone so, find another thread or user if you dont have a x (the kitkat rom is from/for a 7041D, so maybe your in luck too if you have the D version)
https://forum.xda-developers.com/alcatel-pop-c7/help/alcatel-one-touch-pop-c7-kitkat-twrp-t3438624 this other thread has the working rom, tools, and scatter file.
I could write a tutorial, but i based my carefull work on that thread and the links he provided. I also watched the youtube video even tho I dont understand a word thats being said.
Basicly NEVER EVER overwrite or format the phone completly or do sh1t with the preloader. mobile_info we leave alone aswell and we dont like to touch NVRAM aswell. They kinda contain imortant stuff
Basicly i made backups of everything I could or wanted (some thread said "Readback" the preloader can break alcatel phones, Ive succesfully read my whole phone back, but NEVER tried "downloading" or flashing preloader, cause i dont want a brick.) so I have everything saved and i could compare my files against any other rom that ppl uploaded.
KitKat rom from that thread I linked you to, get it, just all of it just in case. then if you compare them using CRC/SHA1 or MD5 against your dumps. hopefully like me, MBR, EBR1 and EBR2 are all the same compared to the kitkat one. so i took the liberty of not flashing them.
left us to do the: UBOOT(lk.bin in my backups), BOOTIMG, RECOVERY, SEC_RO, LOGO, CUSTPACK, ANDROID.
I noticed diferences in the logo, recovery and sec_ro, so I followed the tutorial/video on "downloading" those onto my phone... real simple...
I now have KitKat on my 7041x
Phone calls itself a 7041D now and Gyroscope sensor is not working
simple fix for the phone name is in the build.prop file, either google how to edit that (using root, or adb tricks) or do as I tricked, changed the file inside custpack.img using an hexeditor (HxD is my favorite). When you find a 7041D, replace with X. I suggest you use your brain and computer skills to deduce how to "replace" a character instead of inserting seems to start at offset 0x03356000 (http://www-ccpp.tcl-ta.com/files/ALCATEL_ONE_TOUCH_7041X_KK.xml does excist, so it suggest an official rom either was made or support added anyway).
I replaced budhapest with amsterdam and could change the dualsim to false and compensating the file size change by removing some 0x00 after the file.. but felt it was too risky and only tried the D into X wich was succesfull. ill check if I can find the AcceleroMeter/Gyro? module or fix.
If anyone has a question, sure ask me. but the rom is there, make backups before ANYTHING, and never full format or touch the preloader. ive read it might be able to fix using some Jtag method, but I cant remember the thread and this is quite the old phone by now. if ever, ill try a newer rom, but probably have to make it myself. another kitkat rom Ive found wasnt clean but this one was like it was a OTA, the phone migrated the 58 apps, and all my settings where still there, whatsapp worked right away without trouble and I can now play Pokemon GO (the x version has the 1gig ram )
Bedank @JMailuhu for making this thread and pointing and warning people. within 1 week of fixing this free phone Ive updated to kitkat. Now ill try fixing the accelerometer problem and maybe try other roms (ow well, kitkat does work fine) no root or custom recovery sofar
TLDR: Have a cookie, sorry I talk too much. much better than "ROM NOW" comments
Hi everyone ... this is my first post here so I hope I'm not doing anything wrong.
I'd like to root my ZTE Blade A430 with build number TIM_IT_QB18S_P632A10V1.0.1.
I've seen How to root your ZTE Android device but it looks pretty old, not sure if I can use that on new devices running android 4.4 ?
Also could not find ClockworkMod for my specific device not sure what I should use on my device ?
I'd be happy with TWRP for my device too as long as it works fine on my device.
I was wondering: If I'm willing to sacrifice anything that I've installed on my phone can I just update using the superuser.zip update package with the stock recovery system ? or wil it fail sig check or even damage the system ?
If something goes wrong can I still use the stock recovery system to reset to factory ? will it read data from an internal partition or does it
require the stock update.zit with the original firmware in the SD ?
ATB
David
Open in chrome.
.
.
http://4pda.ru/forum/index.php?showtopic=668222
I realise I'm far too late with this answer, but maybe someone else will be searching for the same thing.
I used Kingo Root, on my ZTE Blade A430. Apart from notifications about it being dangerous, advising me to uninstall it, it's been fine for some months, now.
FWIW, mine came with KitKat 4.4.4 installed.