Database Users

Android 5.0.2 Factory image[BR]

hello all today i am going to share factory images of Lollipop 5.0.2​
xt1033[Dual Sim]: Download Link
xt1032[Single Sim]: Download Link
Mfastboot: link
Steps to restore stock firmware:
1) Reboot the phone into bootloader mode. There are 2 ways to do this.
I) The 'hardware' way.
a) Unplug the USB cable and power off the phone.
b) Press and hold 'Volume down' then power on the phone.
c) Connect USB cable to your computer.
II) The 'software' way.
a) Enable developer mode on the Moto G (Settings-> 'About Phone'. Tap 7 times on 'Build Number')
b) Enable USB debugging. (Settings -> 'Developer options' -> 'USB Debugging' -> check)
c) Connect phone to computer via USB, you should see a new ADB device detected and drivers installed.
d) Open "Minimal ADB and Fastboot". Type:
Fastboot commands:
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
have attached batch file for easy flashing
Happy flashing

xt1032 mirror by @likurik : Download link

reserved 1

Can you show the contents of the file?
Sent from my Nexus 5

three hours to download one zip.file.Nice!
Mirror for xt1032 https://mega.co.nz/#!rNASwDhJ!aFGvFF0atLS2QisasQYhchxig718AUW6wU2CpeufK1Y

uhm... ooookkk... you know there are factory images already available for about 2 weeks ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Anyone knows a Recovery, which is compatible with the new bootloader?

Go to development section and check recovery threads, it's clearly mentioned there with what it's compatible. Small hint, latest TWRP for example.

brainscollector said:
Go to development section and check recovery threads, it's clearly mentioned there with what it's compatible. Small hint, latest TWRP for example.
Click to expand...
Click to collapse
No, New TWRP isnt compartible with this update. I have tested it! I think the Problem is the partition, with the update the partition is smaller

I downloded it, i was GPE 5.0.1, tryed to flash via fastboot but the phone dont boot, its blocked @ bootloder unlocked image. the install seems to have no errors... any ideas?

ROOT FOR MOTO G LOLLIPOP 5.0.x
jonas210678 said:
No, New TWRP isnt compartible with this update. I have tested it! I think the Problem is the partition, with the update the partition is smaller
Click to expand...
Click to collapse
http://techerrata.com/file/twrp2/xt1032/openrecovery-twrp-2.8.1.0-xt1032.img
Also you don't need to use superuser flashable by custom recovery,
http://www.theandroidsoul.com/chainfire-releases-android-5-0-root-moto-g-moto-x-2013-2014-editions/
For all Moto G variants, and works fine. Just turn on into fastboot mode, plug in phone (remember to have enabled USB Debuging in developer options), unzip archive and run windows bat to root device. I can confirm it's working as tested by myself. No custom recovery needed, just unlocked bootloader (obviously) and it's done.
I'm proposing to follow this guide for theaking
http://forum.xda-developers.com/moto-g/general/tweaks-motorola-stock-5-0-2-basic-tweaks-t3012488
And use greenify with donation pack to maintain full control over running apps

jonas210678 said:
No, New TWRP isnt compartible with this update. I have tested it! I think the Problem is the partition, with the update the partition is smaller
Click to expand...
Click to collapse
Lastest TWRP is as compatible as on GPE 5.0.1. Tried myself 3 days ago, rooted from there.

stock!!!???
excuse me for asking but I am new here , so I want to Know , is this an official firmware from google and can I get future updates after flashing this rom ??

abd8030 said:
excuse me for asking but I am new here , so I want to Know , is this an official firmware from google and can I get future updates after flashing this rom ??
Click to expand...
Click to collapse
It's Official Firmware from Motorola and yes, you will recieve future updates.

pico hackr said:
hello all today i am going to share factory images of Lollipop 5.0.2
Click to expand...
Click to collapse
please share your links in the existing thread in the development section.
Thread closed

LG G2 D802 Brick (test point) (fastboot)

hi everyone, sorry for the google translator
by a test point, I managed to phone has connectivity to the notebook.
when start phone in Download Mode, appears fastboot
[490] FASTBOOT MODE STARTED
[570] UDC_START()
[610] ---PORTCHANGE----
[620] ---RESET---
[630] ---PORTCHANGE---
[690] FASTBOOT: PROCESSING COMMANDS
with adb commands always comes failure
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot boot.bin
fastboot flash aboot aboot.bin
fastboot flash recovery recovery.bin
fastboot flash laf laf.bin
fastboot reboot
message phone
[548290] error 4: failure sending erase group start command to the card (RCA:2)
notebook
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please , I need your help
thanks
Cristian

Maybe this tool will help u to fix ur problem.
http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076
[490] FASTBOOT MODE STARTED
[570] UDC_START()
[610] ---PORTCHANGE----
[620] ---RESET---
[630] ---PORTCHANGE---
Click to expand...
Click to collapse
this looks like u will enter the Recovery mode with PowerButton -Volume, but with no recovery u end in fastboot.
U tried PowerButton +Volume? (DownloadMode)
u got the correct LG Driver on ur PC? http://oceanhost.eu/ed0bnrnghgef/LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.12.3.exe.htm
After i got a real brick (bootloader crash) with my D802 i fixed it like this:
1. LG G2 Stock Firmware (Go Back to Stock)
- follow the kdz instruction
- Important, get the LG Driver new for ur PC!
http://forum.xda-developers.com/showthread.php?t=2432476
2.[TOOLS] One Click ROOT+TWRP Recovery for Lollipop Stock Firmware
- read and follow and u will have root+TWRP Recovery bumped after that
http://forum.xda-developers.com/lg-...ols-how-to-install-twrp-bump-d80230a-t3072186
3. get the JB Bootloader for D802
- install via recovery
https://www.androidfilehost.com/?fid=95916177934533199
- reboot ur phone, get Custom Rom (D802) u want on ur SD and install via Recovery (Wipe Cache etc.)
looks like ur Bootloader is wrong/crashed and/or u dont got correct DRIVER (Fingerprint)

hi BFruchtfliege, thanks for your help.
- Drivers is OK
- when press POWER +VOLUME UP = enter fastboot
[490] FASTBOOT MODE STARTED
[570] UDC_START()
- LG FLASHTOOL
-TOT METHOD impossible, only this driver found in device manager
- One Click ROOT+TWRP Recovery for Lollipop Stock Firmware
- FASTBOOT JB-D802-BOOT-LOADER.zip

That looks really crazy with the "??????" thats not normal, What DesktopSystem u use?
If u cant handle point 1. from me u dont need 2. and 3. because u need point 1. ready.
Look in Forum for "brick D802" or like that.
U will find much, may there are other methods, that will help u and i dont know!
But i think, Driver isnt okay... or u got branded mobile... or u got no D802... or ur PC-OS occurs the prob.
Hope u can handle ur Phone. :fingers-crossed:
My english is pig bad, i think i spider

ls 980 bricked . fastboot only but not able to write command
hi everyone,
by a test point, I managed to phone has connectivity to the pc
when start phone in Download Mode, appears fastboot
[490] FASTBOOT MODE STARTED
[570] UDC_START()
[610] ---PORTCHANGE----
[620] ---RESET---
[630] ---PORTCHANGE---
[690] FASTBOOT: PROCESSING COMMANDS
with adb commands always comes failure
fastboot erase boot
fastboot erase aboot
fastboot erase recovery
fastboot erase laf
fastboot flash boot boot.bin
fastboot flash aboot aboot.bin
fastboot flash recovery recovery.bin
fastboot flash laf laf.bin
fastboot reboot
message phone
[548290] error 4: failure sending erase group start command to the card (RCA:2)
Also find error 2

Wifi not working X1575

Hi, I have the X1575 stock firm 6.0, I recently rooted the phone and I think I used a logo.bin for another version and my Wifi its not working, the switch wont stay ON.
I dont have a backup, What can I do? PS. The options in my bootloader screen looks different now.

salvadorposse said:
Hi, I have the X1575 stock firm 6.0, I recently rooted the phone and I think I used a logo.bin for another version and my Wifi its not working, the switch wont stay ON.
I dont have a backup, What can I do? PS. The options in my bootloader screen looks different now.
Click to expand...
Click to collapse
just replace the logo.bin with the correct 1from stock

the-light said:
just replace the logo.bin with the correct 1from stock
Click to expand...
Click to collapse
Thanks, but I'm afraid that hasn't worked.
I think is something else, I'm getting this error in the log:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

salvadorposse said:
Hi, I have the X1575 stock firm 6.0, I recently rooted the phone and I think I used a logo.bin for another version and my Wifi its not working, the switch wont stay ON.
I dont have a backup, What can I do? PS. The options in my bootloader screen looks different now.
Click to expand...
Click to collapse
logo.bin has nothing to do with WiFi working/not-working, at all.
Flash NON-HLOS.bin from the stock image using fastboot. If SuperSU got installed as system root, backup everything, re-flash the stock MPHS24.49-18-4 firmware, flash TWRP, then SuperSU as systemless.
And since that firmware thread is discombobulated and somewhat outdated, the correct commands to flash the firmware is
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot flash bluetooth BTFM.bin
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse

Thanks, I re-flashed the stock and its working just fine, however, twrp its not been installed, Im flashing it using fastboot flash recovery twrp.img and its seems OK but when I try to go to the recovery mode its the android recovery what I find.
Any other suggestion on how can I install the twrp and then supersu?
Spasticdroid said:
logo.bin has nothing to do with WiFi working/not-working, at all.
Flash NON-HLOS.bin from the stock image using fastboot. If SuperSU got installed as system root, backup everything, re-flash the stock MPHS24.49-18-4 firmware, flash TWRP, then SuperSU as systemless.
And since that firmware thread is discombobulated and somewhat outdated, the correct commands to flash the firmware is
Click to expand...
Click to collapse

salvadorposse said:
Thanks, I re-flashed the stock and its working just fine, however, twrp its not been installed, Im flashing it using fastboot flash recovery twrp.img and its seems OK but when I try to go to the recovery mode its the android recovery what I find.
Any other suggestion on how can I install the twrp and then supersu?
Click to expand...
Click to collapse
If TWRP doesn't stick after trying Reboot > Recovery, flash it once more. While in there, go to Mount and checkmark System. Then go back to Advanced > File Manager and either delete, or add ".bak" to the following files:
/system/recovery-from-boot.p
/system/etc/install-recovery.cfg
/system/etc/recovery-resource.dat
That should make it stick.

Thank you very much Sir!

TWRP will fix itself... Once you flash TWRP and start it, go to Reboot in TWRP and select Recovery, the device will restart and TWRP will load, it will stay from now on.

Redmi 2 prime dead after update with cmd.

Hi,
I downloaded the latest firmware miui8 from miui .com for my Redmi 2 prime to update because VOLTE was not enable.
After flashing using this command , it doesn't power on .
I use this command
Code:
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot reboot
It doesn't detect on device manager , no recovery mode, no fastboot mode.
Completely dead, No led while charging also.
Help!
Here's the file that i use
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

try this.. http://en.miui.com/thread-382180-1-1.html

Thanks i have done it after sorting the two test points and it detect as Qualcomm.

Does this thing will happen in miui 8 lollipop firmware or only in kitkat firmwire

Broo Why u try tiz method...!! Mi flash Tool is easy method so If u r flashing redmi2 flashing tiz method.. Dont try othr methods ??

While Downgrading i bricked my redmi 2 1gb.... No response...screen dead ...but i removed the battery and pressed volume down and power button and it just vibrated then i connected to pc( thank god it was showing device id in cmd) just fresh flashed everything and it restarted and my phone was back to live.. I hope ur device gets to fastboot mode.

Need some advice for my xt1562

I'm new here, so sorry if this is a duff post.
I've done searches to no avail.
I bought my x play second hand. It's been rooted to a none stock android 7.0. I'm having issues with sd card being unrecognised. I've read that this could be a motherboard problem. I've checked it with a number of different cards that all work absolutely fine on other devices.
My question is, would it help if I returned my phone to stock then upgraded to the proper versions of android via the download direct to phone?
If so, is there an updated method? The one I tried to follow uses SDK but the instructions seem to be for an old version (it's a 2015 post) as the version of Android Studio I installed seems to be unrecognisable from what is being described. I'm not savvy enough with these systems to work out what I need to do instead.
Thanks in advance.
Another thought, would it be worth installing a different none stock ROM?

if you are rooted, install twrp and try other custom rom
if you need install marshmallow with fastboot:
marshmallow pack with update 1 october 2016 update
Code:
https://my.pcloud.com/publink/show?code=XZ7WHdZJvy0fTbyYKuY5rtBpSzQD79KkAey
adb fastboot app:
Code:
https://my.pcloud.com/publink/show?code=XZcmHdZk8WW37zD64Q158z63w8dFyNGH8zX
extract marshmallow pack in adb fastboot folder like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
install 6.0.1 with adb commands:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
Click to expand...
Click to collapse
or faster - put this file in adb folder and use it:
Code:
https://my.pcloud.com/publink/show?code=XZv1HdZNploxJptYcYB2gNS28m2y5v8eqkX

wiemar said:
if you are rooted, install twrp and try other custom rom
if you need install marshmallow with fastboot:
marshmallow pack with update 1 october 2016 update
Code:
https://my.pcloud.com/publink/show?code=XZcmHdZk8WW37zD64Q158z63w8dFyNGH8zX
adb fastboot app:
Code:
https://my.pcloud.com/publink/show?code=XZcmHdZk8WW37zD64Q158z63w8dFyNGH8zX
extract marshmallow pack in adb fastboot folder like this:
install 6.0.1 with adb commands:
or faster - put this file in adb folder and use it:
Code:
https://my.pcloud.com/publink/show?code=XZv1HdZNploxJptYcYB2gNS28m2y5v8eqkX
Click to expand...
Click to collapse
Thanks for replying, I really appreciate the effort.
A lot of this is just words on my screen. I may be able to work out what some of this means given time. Which folders am I putting stuff in? On phone or PC? Also the top 2 http adresses are the same, is this intentional?
Thanks again.

my mistake. edited links. fastboot on pc and extract marshmallow pack inside adb folder. look at screen

Will LTE work on this MM 6.0.1 ROM?
wiemar said:
if you are rooted, install twrp and try other custom rom
if you need install marshmallow with fastboot:
marshmallow pack with update 1 october 2016 update
Will LTE work fine with this MM 1-Oct-2016 ROM?
Also instead of running all these commands one after another, can you please point me to a .zip file, which i can directly flash it from TWRP like other ROMs? Thats much easier for me than running all these commands manually.
Click to expand...
Click to collapse

lte works normaly.
you need find backup from stock that can be installed from twrp. i don't have it. adb fastboot method is faster. and you don't read all my answers. you don't need use commands, just 1 file.

Really appreciate the links and steps!!! Thanks.
wiemar said:
lte works normaly.
you need find backup from stock that can be installed from twrp. i don't have it. adb fastboot method is faster. and you don't read all my answers. you don't need use commands, just 1 file.
Click to expand...
Click to collapse
Currently I am running on LIneageOS Nougat 7.1.1. I am planning to do this downgrade to MM if I really don't like the battery backup on Nougat 7.1.1.
Really appreciate the links and steps!!! Thanks.
---------- Post added at 09:08 AM ---------- Previous post was at 08:46 AM ----------
wiemar said:
lte works normaly.
you need find backup from stock that can be installed from twrp. i don't have it. adb fastboot method is faster. and you don't read all my answers. you don't need use commands, just 1 file.
Click to expand...
Click to collapse
BTW, one question. How do you run that single batch file?

... restart phone to bootloader, connect to pc, and run this file.

Okay, I've now discovered that TWRP is already installed. Can I use any xt1562 zipped Rom or does it need to be specific to TWRP. I've put the zip on my phone ready to go and done a nandroid backup but wanted to check first before I hit install.
Thanks again