Related
Hi everybody
I have a problem with my Galaxy S5 (no custom rom, official)
I normally used my phone, I locked it. But, after about 10 mins I tried to unlock my phone, but nothing happens
I tried to reboot, nothing happens. I tried take out and put the battery - nothing happens. So I searched on Google and tried some keys combinations, but nothing happens. My phone has about 80% battery. I tried to charge it in the charger, but nothing is happening (black screen, no notiffication light). Also I tried to put off my SIM and SD Card, but nothing happens
Do you have some skills in it? Can you help me?
Few days ago, I faced the same problem..
http://forum.xda-developers.com/showthread.php?t=2853472
Then I'd to take it to the Samsumg store.. And they return it back in 2 days and said me it was a software problem..
I wanted to do a recovery reset, but i can't boot my phone anymore, also the Kies doesn't see anything, so. Did you really think that is a software problem? Because my phone won't vibrate at boot. So maybe it can be a hardware prob :/
EDIT: Phone started blinking red light... (nottiffication), I tried to charge it, but nothing...
Mate as mentioned early, same problem I faced..
It'll be better, if you return it to Samsung customer care..
You seem to be saying that the problem occurred unexpectedly. So presumably this isn't subsequent to a flash error, newly installed app or a trauma (dropping the phone, etc).
First ensure that your battery is charged, plug in the phone to a charger as well and try turning it on. If at all possible, borrow a battery from a friend's S5 or go to a store and borrow a battery for 30 seconds to confirm that the battery isn't the issue.
If the problem persists, then remove the cable and battery. Then put the battery back into the phone and press and continue to hold in this order, the volume down key, then menu key, then power key. Hold all three until the screen powers up (about 5 seconds). If this doesn't work.. the most likely problem is a damaged power key - try pressing hard or "wiggling" it to see if that makes a difference.
If you still can't start the phone, then see if a local cellular repair shop has a "jtag jig" that you can borrow. Or you can buy one on Ebay for a few dollars. When this jig is plugged into the USB socket, the phone should automatically restart.
If all of the above fails (which is unlikely), you would seem to have a hardware problem or unknown origin. Which would be very unusual. If your phone is under warranty, make a claim. Otherwise get an estimate to repair it.
.
If I hold all 4 buttons at the same time and connect the phone to PC, PC recognises the phone for a few seconds. Well, maybe not recognises, I cant see it, but it plays the same sound as if connected flash drive to pc. However, everytime it disconnects within a few seconds...
I´m in the same case, but I was flashing the Galaxy S5 with the four files ROM and the pit file using Odin3.09. All the process ended well, but after rebooting there apeared one Screen sayin something like "Some files at this phone are encripted and there can´t be modified......." so I did a manual reboot and take off USB cable and from this moment the phone don´t do anything but giving a sound when I plug USB to computer cable and I can see new COM --> Qualcomm HS-USB QDLoader 9008, and there repeat a loop.
I´m still looking for a solution, but it gives me that there is time to change phone.
Possible Fix
This thread is old but idk if this was ever solved, so in case anyone else ever has an issue like this. My Gf is still rocking this phone so i've had a little experience with it. The phone wont turn on or charge. I got it to work by sticking a flat head screw driver and prying it fairly hard against the bottom of the battery (the side closest to the charge port) and forcing the battery harder against the metal contacts. While pushing the battery I turn on the phone and it starts right up and continues to run even after letting the pressure off. I've noticed this happens every few times i take the battery out, but this method has never failed for me turning the phone back on. Hope someone finds this helpful.
kimo hands said:
This thread is old but idk if this was ever solved, so in case anyone else ever has an issue like this. My Gf is still rocking this phone so i've had a little experience with it. The phone wont turn on or charge. I got it to work by sticking a flat head screw driver and prying it fairly hard against the bottom of the battery (the side closest to the charge port) and forcing the battery harder against the metal contacts. While pushing the battery I turn on the phone and it starts right up and continues to run even after letting the pressure off. I've noticed this happens every few times i take the battery out, but this method has never failed for me turning the phone back on. Hope someone finds this helpful.
Click to expand...
Click to collapse
weird, youd think that bending the tabs out to force contact with the battery better would do the same trick fwif
Hello,
I received the YotaPhone 2 (YD206) today.
The box was sealed.
When I tried to turn on the phone, it didn't start. I thought it was empty so I put in on charger for 2 hrs.
After that I tried again , but still nothing happened -- i was holding power button multiple times, as long as 5 minutes at the time, but there was simply no response -- no vibration, no sound, screen remains black (not turned on), anything at all.
I tried different chargers as well (Xiaomi and Samsung one) -- they weren't working with this phone either.
When I connect phone to a PC, I just hear sound that something is connected (I saw installing drivers notice first time I connected it), but nothing happens at all. I don't see the phone in my computer or anywhere else.
Is there way I can fix this somehow? What else can I try?
Thanks!
You can try unlocking the bands like described here.
Not sure it will help but you can at least try.
http://4pda.ru/forum/index.php?s=&showtopic=550302&view=findpost&p=55303436
fly20 said:
Hello,
I received the YotaPhone 2 (YD206) from coolicool.com today.
The box was sealed.
When I tried to turn on the phone, it didn't start. I thought it was empty so I put in on charger for 2 hrs.
After that I tried again , but still nothing happened -- i was holding power button multiple times, as long as 5 minutes at the time, but there was simply no response -- no vibration, no sound, screen remains black (not turned on), anything at all.
I tried different chargers as well (Xiaomi and Samsung one) -- they weren't working with this phone either.
When I connect phone to a PC, I just hear sound that something is connected (I saw installing drivers notice first time I connected it), but nothing happens at all. I don't see the phone in my computer or anywhere else.
Is there way I can fix this somehow? What else can I try?
Thanks!
Click to expand...
Click to collapse
Sounds like the phone is defect. The only thing I can think of is that it somehow freezed up and you will need to let the battery drain so all power is off the phone and then try to recharge it. Draining the phone completly without screen use can take up to 7 days.
I finally managed to turn it on,by keeping it on charger for whole day and night and after a couple of attempts it was on.
I thought battery voltage was pretty low which prevented it from turning on.
I used a phone for a day, completely discharged it and then recharged it to 100% again. I thought everything is gonna be good now.
Then I wanted to upgrade to Lollipop, I decided to use YotaFlasher to flash EU KitKat first, and that worked fine. After that, I used OTA update to download Lolipop.
Download finished, and I was offered to "restart device and apply update", but as soon as I confirmed, the device went off and I can't turn it on anymore. What the heck is happening with this yotaphone? (battery was at 97%)
I can't turn it on, restart, put in download or recovery mode, get it to charge or get the screen on. Also PC don't recognize it *AT ALL* -- not even sound that something is connected. It looks completely dead (again).
Any ideas what I can do to fix my new problem?
Hi! Similar problems have been posted on the forum before, but none of the solutions worked for me.
Stock Mi A1 with vanilla Oreo (latest official patch), everything stock & vanilla, no hacking, no rooting, no modifications etc whatsoever. All apps installed through google store, nothing fancy.
In short: put my phone into airplane mode about a week ago (battery at 90%), then a few hours into the flight the phone blacked out. Won't react to power button, power+volume up, power+volume down, all buttons, no buttons, any combination of buttons for any length of time. Phone was in my pocket, no physical impact or anything, just "died".
There are 2 signs of life:
- If i plug it to charge the notification LED blinks about 1 / sec
- If I connect it to a computer, it recognizes it as Qualcomm 9008 blabla device.
What I have tried so far and didn't work:
- All imaginable button combinations: no reaction
- Fully charging phone: doesn't help
- Letting battery deplete: doesn't help
- Disassembled the phone, disconnected the battery, put it in charger, reconnected the battery: this fixed the issue for some, didn't work for me.
I GUESS that since the computer recognizes it I could try to "flash" it or whatever, although 1) there are a lot of negative posts about it 2) I have no idea how to do it (which exact ROM, using which exact tool, etc).
I wouldn't mind not losing the data on the phone though, if that is an option: I was about to back up my photos on the flight, but it died before I could have done it.
There is no official Xiaomi support / service where I live, bought the phone while visiting a country which sold it.
Any suggestions?
Small update.
- adb doesn't see the device.
- Miflash sees the device, but dies at "ping via firehose" stage.
-A1 low level backup tool doesn't see the device.
After 2 weeks of googling I have found around 50 forum threads around The Internet with similar issues, but no solution as of yet. Sounds promising!
I had this problem 2 hours ago and fixed with the Disconnect battery, connect charger, reconnect battery (while charger is still connected just to clarify). you tried this fix like this? reconnecting battery while charger is still connected?
Maybe try getting a different battery and connect it, and/or maybe let the battery discharge itself.
KeiFTW said:
I had this problem 2 hours ago and fixed with the Disconnect battery, connect charger, reconnect battery (while charger is still connected just to clarify). you tried this fix like this? reconnecting battery while charger is still connected?
Click to expand...
Click to collapse
Thanks for the replies fellas. I have tried this before. Now I have tried this again just to be sure. Did it multiple times. Disconnect battery, connect charger, reconnect battery. It doesn't alter the phone's state in any way. Doesn't react to buttons, flashes led on charger, shows up as qualcomm 9008 device on PC, but doesn't let me flash anything. Sad.
Qualcomm 9008 is sigh of faulty emmc chip. Bad soldering i guess. Take the device to the service center. My 1 cent op. Regards
Its very simple the solution. The problem is the cable. Try to change the cable, charging the phone and turn it on. I my case works
fusionfan said:
Sad.
Click to expand...
Click to collapse
Have you had any progress? I'm having similar issues with my mi mix 2s.
The answer is to replace the battery. I have two dead batteries for my Mi A1. Both batteries were left in the drawer for several months and upon connecting them to my Mi A1 they showed the dreaded blinking light. After trying to fix this for a day I gave up. I disconnected the battery, the phone booted up right away. Bought a new battery and everything is working again. Hope this helps!
I too had numerous kind of hard bricks with my previous smartphones.
Here are the links that will save your life:
Link 1
Link 2
Link 3
Try the ones that you think fit the most.
I had the same issue just today
removed the battery connector and connected it back without touch any other component
phones working fine now
its bricked and get into edl mode just try to flash with MiFlash tool i have faced this problem some time ago when i flashed an ota with twrp recovery then my phone went dead and when i connect it to pc led blinks and phone recognise in ports as "diagnostic port 9008d" something like that then i install the drivers and flash stock pie rom with MiFlash tool but after successful flashing phone wont boot but after pressing power button for 10 to 15 second phone starts. i have unlocked bootloader so it works for me but i'm not sure it works on locked device try it or use QFIL flash tool from QPST
This happened to me but all i did was charge the phone the whole time.
My Xiaomi A1 had the same issue, I think I have tried all available solution but unfortunately mine still dead, and when I connect the charger it blink.
I guess the ultimate solution is to throw it to a recycle bin.
This is my first time posting here so hi everyone.
I have a problem with my moto g5+.
I purcased my moto g5+ around a year a go completely new and ended up not using it.
Now my primary device broke down and i thought its time to switch only one problem.
It won't turn on.
When I connect charger white led will consistantly blink but nothing else happens no battery charging screen , nothing.
It wasn't compleatly discharged since I charged it up till 100% and turned it off when I puted it away , i still did charge it a couple times during the year of not using it and last time was a month ago and it charged just fine.
No water or Physical Damage has been done to the phone no rooting also , it just wont turn on.
I tried hard reseting it , tried to hold power button for 5 min tried to enter boot loader to access recovery mode with no luck.
I used original charger and cable that came with phone to charge it.
Since warranty is out of the way by this point because i bought it in july im seeking a fix or recommendation here.
All help will be appreciated
ridestos said:
This is my first time posting here so hi everyone.
I have a problem with my moto g5+.
I purcased my moto g5+ around a year a go completely new and ended up not using it.
Now my primary device broke down and i thought its time to switch only one problem.
It won't turn on.
When I connect charger white led will consistantly blink but nothing else happens no battery charging screen , nothing.
It wasn't compleatly discharged since I charged it up till 100% and turned it off when I puted it away , i still did charge it a couple times during the year of not using it and last time was a month ago and it charged just fine.
No water or Physical Damage has been done to the phone no rooting also , it just wont turn on.
I tried hard reseting it , tried to hold power button for 5 min tried to enter boot loader to access recovery mode with no luck.
I used original charger and cable that came with phone to charge it.
Since warranty is out of the way by this point because i bought it in july im seeking a fix or recommendation here.
All help will be appreciated
Click to expand...
Click to collapse
It seems your device had hard bricked, you can recover it by using the blank flash file.
Here is the procedure:-
https://forum.xda-developers.com/g5-plus/help/moto-g5-plus-hard-bricked-recognized-t3636457
But, I don't understand how you are device got hard bricked as you need to downgrade or root it to get your device bricked. But you can recover it by above link.
riyan65 said:
It seems your device had hard bricked, you can recover it by using the blank flash file.
Here is the procedure:-
https://forum.xda-developers.com/g5-plus/help/moto-g5-plus-hard-bricked-recognized-t3636457
But, I don't understand how you are device got hard bricked as you need to downgrade or root it to get your device bricked. But you can recover it by above link.
Click to expand...
Click to collapse
thanks for the reply gonna try it today, I don't really understand my self how did i hard brick it but gonna try you're solution.
riyan65 said:
It seems your device had hard bricked, you can recover it by using the blank flash file.
Here is the procedure:-
https://forum.xda-developers.com/g5-plus/help/moto-g5-plus-hard-bricked-recognized-t3636457
But, I don't understand how you are device got hard bricked as you need to downgrade or root it to get your device bricked. But you can recover it by above link.
Click to expand...
Click to collapse
Tried doing this methode but my pc wont reconize the device as connected , when i connected it to the pc it showed lightning symbol like charging , i left it to charge for 2h but still nothing.
In order to use blankflash successfully your PC needs to be in test mode. To do this
Code:
Click Start, and then type cmd in the Search box.
Under Programs, right-click cmd.exe, and then click Run as administrator.
At the command prompt, type the following text, and then press Enter: bcdedit /set TESTSIGNING OFF.
Close the Command Prompt window, and then restart your computer
When you plug in phone, look at device manager, ports, and see that it is connected. It should say something like "Qualcomm HS- USB Diagnostics " with a port "Comm 7" or whatever #.
1.Be sure Qualcomm drivers are installed.
2.Make sure your Hard Bricked Moto is connected in device manager under ports .
3.Hold volume down and power until you see it connect under ports. It should say "qhsusb-bulk" You should hear a slight sound from PC when it connects. This can be very tricky as another member [ Rakesh1b] explained his method.
trick is to press and hold the power button then it disconnects and connects to pc u could hear sound from pc then press voldown and power and launch blankflash.bat at the same time i mean same time then it detects and leave the buttons once you see the script running if not it will reboot the device and after running the script it will be booted to fastboot mode . if u failed 1st time repeat same power off then remaing things same as mentioned.
Click to expand...
Click to collapse
[email protected] said:
In order to use blankflash successfully your PC needs to be in test mode. To do this
Code:
Click Start, and then type cmd in the Search box.
Under Programs, right-click cmd.exe, and then click Run as administrator.
At the command prompt, type the following text, and then press Enter: bcdedit /set TESTSIGNING OFF.
Close the Command Prompt window, and then restart your computer
When you plug in phone, look at device manager, ports, and see that it is connected. It should say something like "Qualcomm HS- USB Diagnostics " with a port "Comm 7" or whatever #.
1.Be sure Qualcomm drivers are installed.
2.Make sure your Hard Bricked Moto is connected in device manager under ports .
3.Hold volume down and power until you see it connect under ports. It should say "qhsusb-bulk" You should hear a slight sound from PC when it connects. This can be very tricky as another member [ Rakesh1b] explained his method.
Click to expand...
Click to collapse
Thanks for heads up gonna try to do it again tomorrow I hope this will work and I will be able to get my new phone runing tomorrow since I really need that phone .
ridestos said:
Thanks for heads up gonna try to do it again tomorrow I hope this will work and I will be able to get my new phone runing tomorrow since I really need that phone .
Click to expand...
Click to collapse
Good luck, as it is not an easy process. One time it took me nearly half an hour to time it right, to get blankflash to run successfully. Also I played with a phone that would never flash Vaches blankflash for the G5 + but had to use the one for addison, Moto Z play. When that happens you have to do the extra step of flashing the addison to potter files. Hopefully you won't have to do all that, but just warning that sometimes it is necessary. Like I posted before, in device manager on PC, make sure under ports it shows as qhsusb-bulk under the port it lists as. Also be sure you have adb/fastboot and all its drivers correctly installed. I am really curious as to how it got hard bricked, because even doing my test phone, it is difficult to hard brick it. I have this "test phone" that has a bad microphone, so I have run it through all kinds of crap, rather than jeopardise my every day phone.
ridestos said:
This is my first time posting here so hi everyone.
I have a problem with my moto g5+.
I purcased my moto g5+ around a year a go completely new and ended up not using it.
Now my primary device broke down and i thought its time to switch only one problem.
It won't turn on.
When I connect charger white led will consistantly blink but nothing else happens no battery charging screen , nothing.
It wasn't compleatly discharged since I charged it up till 100% and turned it off when I puted it away , i still did charge it a couple times during the year of not using it and last time was a month ago and it charged just fine.
No water or Physical Damage has been done to the phone no rooting also , it just wont turn on.
I tried hard reseting it , tried to hold power button for 5 min tried to enter boot loader to access recovery mode with no luck.
I used original charger and cable that came with phone to charge it.
Since warranty is out of the way by this point because i bought it in july im seeking a fix or recommendation here.
All help will be appreciated
Click to expand...
Click to collapse
If your phone was in oreo, you maybe want to try the addison (moto z play) blankflash, i once bricked mine and the potter blankflash always failed.
Also try the USB 2.0 ports, as the 3.0 ones doesn't recognizes it.
Put it on the charger and let it charge. IT could just be deader than disco.
Also check your cable make sure it's a data cable buddy.
pwag said:
Put it on the charger and let it charge. IT could just be deader than disco.
Also check your cable make sure it's a data cable buddy.
Click to expand...
Click to collapse
Already tried that didn't work. And I'm using included cable that came with g5+
red002 said:
If your phone was in oreo, you maybe want to try the addison (moto z play) blankflash, i once bricked mine and the potter blankflash always failed.
Also try the USB 2.0 ports, as the 3.0 ones doesn't recognizes it.
Click to expand...
Click to collapse
Well good news is , that i manged to get it to show up as the device with which i should be able to do blank flash.
The problem now is it won't stay in bootloader to be recognized as that device longer than 30 sec.
It just turns off after some time and pc automaticly wont recognize it anymore.
[email protected] said:
Good luck, as it is not an easy process. One time it took me nearly half an hour to time it right, to get blankflash to run successfully. Also I played with a phone that would never flash Vaches blankflash for the G5 + but had to use the one for addison, Moto Z play. When that happens you have to do the extra step of flashing the addison to potter files. Hopefully you won't have to do all that, but just warning that sometimes it is necessary. Like I posted before, in device manager on PC, make sure under ports it shows as qhsusb-bulk under the port it lists as. Also be sure you have adb/fastboot and all its drivers correctly installed. I am really curious as to how it got hard bricked, because even doing my test phone, it is difficult to hard brick it. I have this "test phone" that has a bad microphone, so I have run it through all kinds of crap, rather than jeopardise my every day phone.
Click to expand...
Click to collapse
Well managed to get it to point where my pc recognized phone as device buuut another thing came up. It only is recognized for max 30sec after witch phone gets disconected from pc. Any way to fix that? Or mby im doing something wrong here? I'm starting to consider battery replacment which i dont want to do because it awful to replace battery on this thing.
What is it recognised as? Battery replacement may save you from having to go through the blankflash process if the device will not stay on while plugged in. Only use blankflash if it shows as qhsusb-bulk.
[email protected] said:
What is it recognised as? Battery replacement may save you from having to go through the blankflash process if the device will not stay on while plugged in. Only use blankflash if it shows as qhsusb-bulk.
Click to expand...
Click to collapse
yes it showed up like that but like I said it wont stay on. I remembered one time when I got it to work this month. I was able to boot in to android , factory reset it but the problem was as soon i pluged in the charger phone went from 44% up to 89% in 2 sec then droped to 14% and then to 0 and turned off. I was able to turn it on again after that , it showed 44% like before the charger was connected then I tried to charge it while it was off and since then I haven't been able to go past booting screen since it just turns off after like 30sec on boot screen.
Mby i should just buy a new battery and see if that will fix it.
ridestos said:
yes it showed up like that but like I said it wont stay on. I remembered one time when I got it to work this month. I was able to boot in to android , factory reset it but the problem was as soon i pluged in the charger phone went from 44% up to 89% in 2 sec then droped to 14% and then to 0 and turned off. I was able to turn it on again after that , it showed 44% like before the charger was connected then I tried to charge it while it was off and since then I haven't been able to go past booting screen since it just turns off after like 30sec on boot screen.
Mby i should just buy a new battery and see if that will fix it.
Click to expand...
Click to collapse
I would recommend that or to take it to a service center. Using the blankflash method could brick the device forever (if it's just a battery/display problem), also you will have to live with another devices bootloader and resulting problems from that.
Wolfcity said:
I would recommend that or to take it to a service center. Using the blankflash method could brick the device forever (if it's just a battery/display problem), also you will have to live with another devices bootloader and resulting problems from that.
Click to expand...
Click to collapse
Well service center is out of the way since closest one to me is like 200km away . I should be able to replace it my self so no problems there. I just hope that maybe replacing the battery will fix everything since the phone is practicly brand new and it would be painful and expensive if it's not a battery problem but like motherboards or smth like that.
ridestos said:
Well good news is , that i manged to get it to show up as the device with which i should be able to do blank flash.
The problem now is it won't stay in bootloader to be recognized as that device longer than 30 sec.
It just turns off after some time and pc automaticly wont recognize it anymore.
Click to expand...
Click to collapse
Reboot your pc, and connect the phone to the wall charger for about 10 minutes, then try again the blankflash, and when it's done just play around with the volume up/down buttons just to keep the bootloader on, and use the g5+ toolkit to flash the oreo stock firmware
in any case, this is the blankflash i used it
https://www.mediafire.com/file/hw7hs4vve51c1qh/blankflash.zip/file
Led Light Blinking
ridestos said:
Well good news is , that i manged to get it to show up as the device with which i should be able to do blank flash.
The problem now is it won't stay in bootloader to be recognized as that device longer than 30 sec.
It just turns off after some time and pc automaticly wont recognize it anymore.
Click to expand...
Click to collapse
How did you managed to show it up as a device , i couldn't. I tried everything that i understood from written on these forums, installed qualcomm drivers , moto g5 plus drivers. The device doesn't show up in device manager, its just blinking and doesn't show anything else , i tried charging it overnight. The Led light does go away after a while when i put it o charging, but when i hold down the power button and volume down key it starts blinking again and nothing beyond that
Rather Suhail said:
How did you managed to show it up as a device , i couldn't. I tried everything that i understood from written on these forums, installed qualcomm drivers , moto g5 plus drivers. The device doesn't show up in device manager, its just blinking and doesn't show anything else , i tried charging it overnight. The Led light does go away after a while when i put it o charging, but when i hold down the power button and volume down key it starts blinking again and nothing beyond that
Click to expand...
Click to collapse
Well for me it works like this , i leave it for about 12h (over night) untouched , then after that I can put it on charger and get in bootloader with holding down power button and vol down button at the same time. I have seen some other people that have revived their phones like this usualy they say to just leave it for 24h but for me it works after 12h. if u can get in to the bootloader
after those hours and the phone doesn't turn off (like mine) I would suggest that u leave it for charging in bootloader for atleast 2h and then try to power it on in factory mode thats how I got it to work one time. I hope this will help you.
ridestos said:
Well for me it works like this , i leave it for about 12h (over night) untouched , then after that I can put it on charger and get in bootloader with holding down power button and vol down button at the same time. I have seen some other people that have revived their phones like this usualy they say to just leave it for 24h but for me it works after 12h. if u can get in to the bootloader
after those hours and the phone doesn't turn off (like mine) I would suggest that u leave it for charging in bootloader for atleast 2h and then try to power it on in factory mode thats how I got it to work one time. I hope this will help you.
Click to expand...
Click to collapse
Thanks for replying.
A few points to clear with 12 hours untouched ,do you mean i have to left phone as it is without even charging and if so after 12 hours for how much time do you charge it before getting it to bootloader and did you charge it with the moto turbo charge or just a regular charger or with computer.
Hello All,
Yesterday I dropped my phone and the power button got stuck. I opened the phone with my tools and was able to fix the button. I didn't power it off, I didn't think it was needed since the button itself has nothing to do with the electronics inside. While I was closing its back It suddenly turned off. I was very gentle, didn't do any fast or unsafe moves. Since then the phone shows no sign of life. I plugged the phone the my pc but there wasn't any sign of life either. The phone didn't show up on Device Manager or anywhere else. One time, I heard a connection sound but I am not even sure if it was because of the phone since the sound came like 5 minutes after I plugged in the phone.
I already tried pressing all 3 buttons for a long time but it didn't do anything.
So what do you think? What might have caused it? And can you help me?
Thanks
First thing i would do is tear down and disconect/conect the battery flat. After that, hold volume keys while conect to pc usb and see if you can get edl mode. Than flash all that has to be flashed with miflash and edltools.
brunojborges said:
First thing i would do is tear down and disconect/conect the battery flat. After that, hold volume keys while conect to pc usb and see if you can get edl mode. Than flash all that has to be flashed with miflash and edltools.
Click to expand...
Click to collapse
Thank you, I will try that when I get back to home.