What a mess! :crying:
I had my S4 i9505 with ROM Movistar Spain (XEC) Android 5.0.1 and I need to install a Movistar or free Android 4.3 ROM to use Mirrorlink in a Toyota Auris car.
After a lot of tinkering with ROMs and bootloaders now the mobile stops at the logo screen showing "Samsung Galaxy S4 GT-I9505".
If I try to install any ROM different from the from the Movistar Spain (XEC) Android 5.0.1 in Download mode with Odin it gives me the following error:
<ID: 0/004> Odin engine v (ID: 3.1207) ..
<ID: 0/004> File analysis ..
<ID: 0/004> SetupConnection ..
<ID: 0/004> Initialzation ..
<ID: 0/004> Get PIT for mapping ..
<ID: 0/004> Firmware update start ..
<ID: 0/004> NAND Write Start !!
<ID: 0/004> SingleDownload.
<ID: 0/004> sbl1.mbn
<ID: 0/004> sbl2.mbn
<ID: 0/004> sbl3.mbn
<ID: 0/004> rpm.mbn
<ID: 0/004> aboot.mbn
<ID: 0/004> FAIL! (Auth)
<ID: 0/004>
<ID: 0/004> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Neither Kies nor dr.fone recognize the mobile, because they stay in "connecting ..."
As I can access the bootloader (Philz Touch 6.58.7) I have done all the wipes but when rebooting it never passes the logo screen.
In Download mode this appears:
ODIN MODE
PRODUCT NAME: GT-I95095
CURRENT BYNARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLE
eMMC BURST MODE: enabled
Any ideas? ¿Could be a KNOX problem?
Thank you!
Are you flashing the latest stock ROM from sammobile.com, updato.com, or samsung-updates.com?
Tried flashing with different USB cables and USB 2.0 ports?
audit13 said:
Are you flashing the latest stock ROM from sammobile.com, updato.com, or samsung-updates.com?
Tried flashing with different USB cables and USB 2.0 ports?
Click to expand...
Click to collapse
Well, after I have spent all the day with this matter I can conclude that there's no way to install an Android version below the 4.4.2 on my mobile (galaxy S4 GI-95095) and I don't know why.
Versions 5.0.1 and 4.4.2 arel OK, but 4.3 and 4.22 not. I tested different bootloaders, changing USB cables, USB ports, de-activating antivirus, etc... unsuccesfully.
There is no way to fully downgrade to 4.3 once the phone is running a 4.4.2 or newer bootloader.
Related
Hi
I have I9505XXUAMDM firmware installed and tried to install I9505XXUAME2_I9505OXXAMDB_NEE.
When device is in download mode and I'll start installing new firmware with odin, it stops immediately and shows this in odin (both 1.85 and 3.07):
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> system.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed (succeed 0 / failed 1)
and this in device:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
CSB-OEM_CONFIG_LSB: 0x30
WRITE PROTECTION: Enable
START [224, 1440]
Unsupport dev_type
Tried also differen usb port. Using original cable. After that I'm able to boot back to old firmware. Any idea what's going on?
Hi,
I used Odin 3.04 to root my phone.
All went smoothly and without a hitch.
Sent telepathically from my S4
Thanks, got it working with 3.04.
Sent from my GT-I9505 using Tapatalk 2
samsung galaxy s4 i9505
here is detail of download mod
currnt binary: samsung official
system status: custom
knox kernel lock: 0x0
know warrenty void: 0x1
csb-config-lsb: 0x3
what i tru
flashing all these official rom with pass story
I9505XXUENAA, I9505XXUFNA5, I9505XXUFNB9, I9505XXUFNC9 and so on
after writing firmware doing wipe
flash with pit files tooo
flash with cutom roms
still no luck
set still in stuck with samsung
one more thing when it stuck at samsung screen have become some line like u press lcd tightly
experts tell me what i miss?
shahab uddin said:
samsung galaxy s4 i9505
here is detail of download mod
currnt binary: samsung official
system status: custom
knox kernel lock: 0x0
know warrenty void: 0x1
csb-config-lsb: 0x3
what i tru
flashing all these official rom with pass story
I9505XXUENAA, I9505XXUFNA5, I9505XXUFNB9, I9505XXUFNC9 and so on
after writing firmware doing wipe
flash with pit files tooo
flash with cutom roms
still no luck
set still in stuck with samsung
one more thing when it stuck at samsung screen have become some line like u press lcd tightly
experts tell me what i miss?
Click to expand...
Click to collapse
latest firmware succes story
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC9_I9505OXEFNC1_I9505XXUFNC9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/133> Added!!
<ID:0/133> Odin v.3 engine (ID:133)..
<ID:0/133> File analysis..
<ID:0/133> SetupConnection..
<ID:0/133> Initialzation..
<ID:0/133> Get PIT for mapping..
<ID:0/133> Firmware update start..
<ID:0/133> SingleDownload.
<ID:0/133> aboot.mbn
<ID:0/133> NAND Write Start!!
<ID:0/133> sbl1.mbn
<ID:0/133> sbl2.mbn
<ID:0/133> sbl3.mbn
<ID:0/133> rpm.mbn
<ID:0/133> tz.mbn
<ID:0/133> boot.img
<ID:0/133> recovery.img
<ID:0/133> system.img.ext4
<ID:0/133> modem.bin
<ID:0/133> NON-HLOS.bin
<ID:0/133> cache.img.ext4
<ID:0/133> hidden.img.ext4
<ID:0/133> RQT_CLOSE !!
<ID:0/133> RES OK !!
<ID:0/133> Removed!!
<ID:0/133> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
no any other solution?
Try flashing the rom for your country and phone, the latest build with odin, latest modem, try and find the right pit file and flash all with odin, then after it passes and restarts, at samsung logo, go into recovery mode( vol up, home button and power button), wipe cache, and wipe data factory reset( from recovery also). Good luck. There is no such thing as stuck i9505 there is allways a solution
Hi guys.
I have a problem, my phone battery and load it only just started custom screen (not shown nor the logo of AT & T and Samsung) The Phone model: Samsung S4 Active I537 AT & T unlocked (purchased by Amazon). Bring it to a technician and informed me that it is the firmware, then using his footsteps on the forum I have tried to install your firmware 4.2.2 that was the one that had at the time of the problem and I could not, when trying to install the ROM me indicates this message in the ODIN:
<ID: 0/008> Added !!
<ID: 0/008> Odin engine v (ID: 3.1100) ..
<ID: 0/008> File analysis ..
<ID: 0/008> SetupConnection ..
<ID: 0/008> initialzation ..
<ID: 0/008> Get PIT for mapping ..
<ID: 0/008> Firmware update start ..
<ID: 0/008> SingleDownload.
<ID: 0/008> sbl2.mbn
<ID: 0/008> Write Start NAND !!
<ID: 0/008> FAIL! (Auth)
<ID: 0/008>
<ID: 0/008> Complete (Write) operation failed.
<OSM> All threads completed. (Succeed 0 / failed 1)
And in phone mode downloda the following:
Odin mode
Product name: SGH - I537
Current Binary: Custom
System Status: Custom
CSB-CONFIG-LSB: 0x30
Write Protection: Enable (in gray)
START (224, 1440)
CHECK FAIL SECURE: SBL2
Until there is in the installation, diganme guys can help me? I am that I shot 5 floor of my building and I lol 2 weeks without phone locating this problem.
I really need help with this guys and I apologize if this is not in the post area but it is the first thing I do.
regards
I am holding on to Korea version of Note 4, SM-N910K.
I am trying to downgrade it to 5.1.1.
I downloaded my firmware via sammobile, and it is version N910SKSU2DPF4_N910SSKC2DPF4_N910SKSU0DPF2_HOME.tar.
However, Odin gave me this error when I Start:
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On my Note 4, I am seeing this error:
ODIN MODE
PRODUCT NAME: SM-N910K
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRENTY VOID: 1
AP SWAEV: 2
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
May I know what have I gone wrong?
Thank you
lruihao said:
I am holding on to Korea version of Note 4, SM-N910K.
I am trying to downgrade it to 5.1.1.
I downloaded my firmware via sammobile, and it is version N910KKTU1COI2_N910KKTC1COI2_N910KKTU0COI1_HOME.tar.
However, Odin gave me this error when I Start:
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On my Note 4, I am seeing this error:
ODIN MODE
PRODUCT NAME: SM-N910K
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRENTY VOID: 1
AP SWAEV: 2
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
May I know what have I gone wrong?
Thank you
Click to expand...
Click to collapse
Restart pc and Try different usb cable.
Trex888 said:
Restart pc and Try different usb cable.
Click to expand...
Click to collapse
Hi, I tried restarting my PC and changing cables. But I am still seeing the same error. I have attached my screenshot about my phone information in the next post.
My Phone Information: Screenshot as attached
Odin version: Odin3-v3.10.6
I am now seeing the error SECURE CHECK FAIL :BOOTLOADER
I tried searching for SM-910K 5.1.1 bootloader but to no avail
lruihao said:
My Phone Information: Screenshot as attached
Odin version: Odin3-v3.10.6
I am now seeing the error SECURE CHECK FAIL :BOOTLOADER
I tried searching for SM-910K 5.1.1 bootloader but to no avail
Click to expand...
Click to collapse
I have the the phone note4 n910k. It have unknown error . Phone restart each 30 seconds. I tried many methods. Download 6.0.1 official rom and custom roms. I tray to downgrade to 5.1.1 but I can't. Please any help in this field
I am downgrading my Korea set of Note 4 SM-N910K where I met the error of SECURE CHECK FAIL : (BOOTLOADER)
I tried searching on the web for SM-N910K Bootloader but to no avail.
Are there any other Bootloader versions that I can use?
Below are the details of my phone information and the error I am facing:
My Phone Information: Screenshot attached
Firmware version that I am trying to downgrade to: N910SKSU2DPF4_N910SSKC2DPF4_N910SKSU0DPF2_HOME.tar
Odin version used: Odin3-v3.10.6
Odin Error:
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Note4 Error:
ODIN MODE
PRODUCT NAME: SM-N910K
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRENTY VOID: 1
AP SWAEV: 2
SECURE CHECK FAIL : (BOOTLOADER)
lruihao said:
I am downgrading my Korea set of Note 4 SM-N910K where I met the error of SECURE CHECK FAIL : (BOOTLOADER)
I tried searching on the web for SM-N910K Bootloader but to no avail.
Are there any other Bootloader versions that I can use?
Below are the details of my phone information and the error I am facing:
My Phone Information: Screenshot attached
Firmware version that I am trying to downgrade to: N910SKSU2DPF4_N910SSKC2DPF4_N910SKSU0DPF2_HOME.tar
Odin version used: Odin3-v3.10.6
Odin Error:
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Note4 Error:
ODIN MODE
PRODUCT NAME: SM-N910K
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRENTY VOID: 1
AP SWAEV: 2
SECURE CHECK FAIL : (BOOTLOADER)
Click to expand...
Click to collapse
Hi!
This Bootloader collection should work.
Although I'm sure it should work, please read the instructions and the info on the page I linked carefully.
Regards,
Vygravlil