Related
So you just updated or downgraded and got a problem. Then your bootloader is locked again and you can't unlock it.
Calm Down. Let's solve it.
First things first. You need to verify your bootloader version, so you'll be able to download the proper OTA.
To do that, use the fastboot command "getvar all".
You should get something like this:
Code:
version-bootloader: 30BE(*)
version: 0.5
cpu: MSM8960 Pro CS
ram: 2048MB Elpida S4 SDRAM DIE=4Gb
emmc: 16GB Toshiba REV=06 PRV=01 TYPE=17
product: ghost
revision-hardware: 0x8300
radio: 0x1
secure: yes
mid: 026b
serialno: 1f51d81c
qe:
unlocked: Not supported
iswarrantyvoid: Not supported
max-download-size: 805306368
uid: 41928C040C000100000000000000
imei: 000000000000000
meid:
sku: 000000000000000
cid: 0xdead
iccid:
date: 01-01-1970
cust_md5:
reason: Invalid CID
ro.build.date:
ro.build.id:
ro.build.tags:
ro.build.type:
ro.build.user:
ro.build.version.codename:
ro.build.version.incremental:
ro.build.version.release:
ro.mot.build.customerid:
ro.product.name:
ro.build.fingerprint:
ro.build.version.full:
kernel.version:
all:
finished. total time: 0.195s
Now, we're only concerned about the first line. Check out your bootloader version and verify your system's version in the list bellow.
30.70 = original 4.2.2
30.71 = 4.2.2 OTA with camera update
30.B2 = 4.4
30.B4 = 4.4.2
30.B7 = 4.4.4
30.BC = 5.02
30.BD = 5.1
30.BE = 5.1
Ok, now you need to download the proper version of your OTA, so you can overwrite your version. It will only work with the exact same version it is installed.
This post should help you find your OTA
http://forum.xda-developers.com/moto-x/general/info-tip-web-sites-official-leaked-roms-t2923347
Now, for making it easier for you, you don't need to install the whole ROM. You just need to flash the logo.
For that purpose, download the bootloader fix and extract it in your ROM's folder, with the "logo.bin" file.
http://d-h.st/EYgh
If it is the right OTA, the problem should be solved. If it isn't, you just need to download another one, being it the version that matches your bootloader.
And that's it. If I helped, hit the "Thanks" button.
I am getting Baseband version: Unknown and no IMEI, no carrier signal after reverting from Marshmallow to Lollipop. Please help.
Code:
> fastboot getvar all
(bootloader) kernel: lk
(bootloader) product: htc_hiau_ml_tuhl
(bootloader) version: 1.0
(bootloader) imei: ***************
(bootloader) version-main: 2.27.707.1
(bootloader) boot-mode: download
(bootloader) version-bootloader: 1.01.0000
(bootloader) mid: 0PK711000
(bootloader) cid: HTC__038
Thanks in advance
I need my radio. please help
cid J__15
version main 2.27.401.1
masoudartan said:
I need my radio. please help
cid J__15
version main 2.27.401.1
Click to expand...
Click to collapse
+1
I have already unlocked a few Motos, including Moto G4 Play without any problem.
But this time is different.
After my unlock attempt, the phone is not actually unlocked and 'fastboot getvar all' reads out the following:
Code:
fastboot getvar all
(bootloader) version-bootloader: moto-msm8952-B1.03
(bootloader) product: athene_13mp
(bootloader) secure: yes
(bootloader) hwrev: P2A
(bootloader) cid: 0x0032
(bootloader) channelid: 0x8d
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) sku: XT1625
athene:7.0/NPJ25.93-14/16
The phone boots and works ok, but the bootloader is NOT unlocked.
I guess I have to flash bootloader B1.03, 2016-10-21, (0xB103) from stock NPJ25.93-14?
Code:
fastboot flash bootloader bootloader.img
The getvar commands says that the bootloader is unlocked. What makes you think it isn't?
zeomal said:
The getvar commands says that the bootloader is unlocked. What makes you think it isn't?
Click to expand...
Click to collapse
Code:
(bootloader) securestate: flashing_unlocked
On bootloader screen:
Battery OK (Charging)
flashing_unlocked
On all other Motos I have unlocked it was:
Device is UNLOCK. Status Code:3
Regardless, did you try flashing a new recovery? If it works without a hitch, your device is unlocked.
Devices change.
del
zeomal said:
Regardless, did you try flashing a new recovery? If it works without a hitch, your device is unlocked
Click to expand...
Click to collapse
When I boot TWRP and run TWRP's file manager, I do not have access to files, even those on /external_sd.
which TWRP to use?
twrp-3.1.1-0-athene.img
twrp-3.1.1-athene_shreps.img
so you have twrp recovery installed correctly ???.
if yes then try to flash super su or custom rom ( resurrection remix best , i am using )
but take back up first with twrp
Sent from my Moto G4 Plus using Tapatalk
If you can flash and replace stock recovery with TWRP, your device is unlocked. You might want to enable TWRP to allow access to modify the system in the first screen, by flashing TWRP again and selecting that option in the first startup screen.
I have Indian Set.
These are the things I did:
Unlocked Bootloader [Successful]
Flashed TWRP [Successful]
Tried to install Custom ROM and Failed because TWRP was 32 bit.
Installed 64 bit TWRP [Successful]
Flashed Custom ROM but was draining lot of battery; so I decided to get back to Stock.
Flashed flashable stock ROM from TWRP from here. [NPNS25.137-92-4 (20180101 security patch)] [Successful]
Which was the Wrong ROM; I guess.
After Flashing the ROM, IMEI showed : 0. So there were no signal.
Tried to fix IMEI after seeing YouTube video using GS_II_Repair app.
The app was for Samsung Galaxy S II. The YouTube video didn't mention it. So. I followed the video.
This HardBricked the phone. [no sign of life, no bootloader, no recovery, no booting menu, just LED light flashing after connecting to charger].
I used Albus Blank Flash to get to Bootloader Menu.
I tried to install the Stock Firmware using fastboot. The flashing Process is successful but the device shows "Bootloader Unlocked Warning" in a loop.
This is what I get of
Code:
fastboot getvar all
Code:
D:\POTTER_RETAIL_7.0_NPN25.137-92_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.x
ml>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8953-C0.C5
(bootloader) product: potter
(bootloader) board: potter
(bootloader) secure: yes
(bootloader) hwrev: P3B
(bootloader) radio: 6
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SAMSUNG RX14MB RV=08 PV=07 FV=0000000000000007
(bootloader) ram: 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
(bootloader) cpu: MSM8953
(bootloader) serialno: ZY224393KX
(bootloader) cid: 0x0032
(bootloader) channelid: 0xc0
(bootloader) uid: 199046E600000000000000000000
(bootloader) securestate: flashing_unlocked
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 358958064342378
(bootloader) meid:
(bootloader) date: 04-22-2017
(bootloader) sku: XT1686
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Fri Jan 2 5: 1:22 UTC 1970"
(bootloader) ro.build.fingerprint[0]: motorola/potter_n/potter_n:7.0/NPN
(bootloader) ro.build.fingerprint[1]: S25.137-92-4/6:user/release-keys
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full[0]: Blur_Version.25.291.6.potter.reta
(bootloader) ro.build.version.full[1]: il.en.US
(bootloader) ro.build.version.qcom: LA.UM.5.6.r1-01900-89xx.0
(bootloader) version-baseband: M8953_37.46.07.47u POTTER_INDIADSDS_CUST
(bootloader) kernel.version[0]: Linux version 3.18.31-perf-gd732fd2 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9 201501
(bootloader) kernel.version[2]: 23 (prerelease) (GCC) ) #1 SMP PREEMPT T
(bootloader) kernel.version[3]: ue Jan 23 11:31:28 CST 2018
(bootloader) sbl1.git: git=MBM-NG-VC0.C5-0-g98be833
(bootloader) rpm.git: git=MBM-NG-VC0.C5-0-g5578f74
(bootloader) tz.git: git=MBM-NG-VC0.C5-0-g3d71f29
(bootloader) devcfg.git: git=MBM-NG-VC0.C5-0-g3d71f29
(bootloader) keymaster.git: git=MBM-NG-VC0.C5-0-g3d71f29
(bootloader) cmnlib.git: git=MBM-NG-VC0.C5-0-g3d71f29
(bootloader) cmnlib64.git: git=MBM-NG-VC0.C5-0-g3d71f29
(bootloader) prov.git: git=MBM-NG-VC0.C5-0-g3d71f29
(bootloader) aboot.git: git=MBM-NG-VC0.C5-0-g99aa1c1
(bootloader) qe: qe 0/0
(bootloader) frp-state: no protection (75)
(bootloader) ro.carrier: retin
all: listed above
finished. total time: 1.528s
I need help to save my device.
DeepeshC said:
I have Indian Set.
These are the things I did:
Unlocked Bootloader [Successful]
Flashed TWRP [Successful]
Tried to install Custom ROM and Failed because TWRP was 32 bit.
Installed 64 bit TWRP [Successful]
Flashed Custom ROM but was draining lot of battery; so I decided to get back to Stock.
Flashed flashable stock ROM from TWRP from here. [NPNS25.137-92-4 (20180101 security patch)] [Successful]
Which was the Wrong ROM; I guess.
After Flashing IMEI shwed : 0. So there were no signal.
Tried to fix IMEI after seeing YouTube video using GS_II_Repair app.
This HardBricked the phone. [no sign of life, no bootloader, no recovery, no booting menu, just LED light flashing after connecting to charger].
I used Albus Blank Flash to get to Bootloader Menu.
I tried to install the Stock Firmware using fastboot. The flashing Process is successful but the device shows "Bootloader Unlocked Warning" in a loop.
This is what I get of
I need help to save my device.
Click to expand...
Click to collapse
Use twrp flashable stock rom.
Gokul said:
Use twrp flashable stock rom.
Click to expand...
Click to collapse
When I try to go to Recovery (TWRP) from bootloader menu "Unlocked Bootloader Warning" keeps looping.
I don't think its possible to flash twrp flashable rom from bootloader.
Is there any other way?
DeepeshC said:
When I try to go to Recovery (TWRP) from bootloader menu "Unlocked Bootloader Warning" keeps looping.
I don't think its possible to flash twrp flashable rom from bootloader.
Is there any other way?
Click to expand...
Click to collapse
Go to Service Center
Kdemwa said:
Go to Service Center
Click to expand...
Click to collapse
I am from Nepal and there are no Motorola Service Center here.
DeepeshC said:
I am from Nepal and there are no Motorola Service Center here.
Click to expand...
Click to collapse
flash any other bootloader logo.bin then it wont show up that bootloader unlocked warning,even though it shows like that it should not pose any problem you should be fine installing any twrp stock rom or custom oreo rom.
but if you had lost imei due to moving from oreo to stock rom then just flash any custom oreo rom (recent ones) and use these 2 commands fastboot erase modemst1,fastboot erase modemst2 then boot into the oreo rom you will have your signal back but for now volte is lost if your network provider supports volte.
wish u good luck.
Rakesh1b said:
flash any other bootloader logo.bin then it wont show up that bootloader unlocked warning,even though it shows like that it should not pose any problem you should be fine installing any twrp stock rom or custom oreo rom....
Click to expand...
Click to collapse
I flashed logo.bin and then twrp. again when I try to go to recovery or System the new logo.bin keeps looping. Is there any other way?
Reparar fastboot
DeepeshC said:
When I try to go to Recovery (TWRP) from bootloader menu "Unlocked Bootloader Warning" keeps looping.
I don't think its possible to flash twrp flashable rom from bootloader.
Is there any other way?
Click to expand...
Click to collapse
intenta buscar en youtube a DAN RATIA el tiene un video que se titula repara inicio en modo fastboot moto g5 plus
it is like me if you flash TRWP and chech the size of recovery partition you will see that you have 16Mb and image recovery need 20 MB this the problem , you should find how to resize partition recovery , if you find solution PM me we are same problem , you can flash stock ROM debloat but the original one is need to resize partition recovery , you made mistake like me by flashing wrong gpt.bin and bootloader
I had pixelexperience latest build (android 11) on my moto g5 plus (potter) . Now, my device is hard bricked because i flashed a wrong file. Now i tried to blankflash, but it gives error
ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
Somebody please help!
aakashdeep930 said:
I had pixelexperience latest build (android 11) on my moto g5 plus (potter) . Now, my device is hard bricked because i flashed a wrong file. Now i tried to blankflash, but it gives error
ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
Somebody please help!
Click to expand...
Click to collapse
Did you use this one?
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
yes, i used this one also. It gave same error.
Hi There , Idont Know How To Say This In Normal Way But Idont know How , So I Will Go Right Through The Problem
I Got This Moto X Pure Edition (style) X1572 | Retasia
And It Was On Android 5 On Locked
I Didn't Know I Have To unlock It Before Flashing So It's Lock
so I Tried To Update The Phone With Frimware That I Grabbed For Frimeware Center But It Was The Wrong Region( La )So I Tried Another (Eu)
Then I Found The Right Region By This Code : fastboot Getvar All and I Found That My Phone Is For Asia but I Can't Flash it because Of Gpt Partiton or bootloader Or Boot ، every Time I get the same errors
To sum up i want These Questions Answered
1 - is There any File For Region Asia With Android 7
2 - does my Phone Supports Deep Flash Cable Or Can I Flash it with Deep Flash Cable and How I Make Deep Flash Cable For Moto
3 - If I Couldn't Flash it Can It be flashed With a Box (like z3x for Samsung)
Please Help as Fast As You Can Im In deep Pain By This Phone and the Phone isn't mine I have to Return it By Tomorrow (1/8/2018) so Please Help To Solve This Problem Thanks
Normally, we should unlock bootloader before flashing firmware.
With unlocked bootloader, you can flash firmware from other regions, low android version (5) to higher one (6 or 7).
When flashing a different region firmware, you should make a factory reset via Recovery.
You should give more infomation about the state of the phone: can enter bootloader, recovery mode or not; can turn on screen or not; how the PC shows when the phone is connected to PC.....
mr_5kool said:
Normally, we should unlock bootloader before flashing firmware.
With unlocked bootloader, you can flash firmware from other regions, low android version (5) to higher one (6 or 7).
When flashing a different region firmware, you should make a factory reset via Recovery.
You should give more infomation about the state of the phone: can enter bootloader, recovery mode or not; can turn on screen or not; how the PC shows when the phone is connected to PC.....
Click to expand...
Click to collapse
Hi My Phone Is On And Its Locked On Bootloader (State Is Locked) I Couldn't Flash Any Frimware My Phone Region Is Asia I Cant Enter Recovery Mode PC And PC Shows It In Fastboot Mode
By The Way Is There Any Way To Put This Phone On Test Point Or EDL?
When you connect the phone to PC, if it turns on and enters fastboot mode (the screen turns on, and you can see the android and phone information), it is reflashable. But the bootloader is needed to unlock (you can google this problem, it's easy to perform). Then you go to firmware.center, find rom Asia with android 7 and flash it to the phone.
If the lcd is not on when you connect to PC, here is the method: https://forum.xda-developers.com/moto-x-style/help/solved-hard-brick-moto-x-style-xt1572-t3693860
mr_5kool said:
When you connect the phone to PC, if it turns on and enters fastboot mode (the screen turns on, and you can see the android and phone information), it is reflashable. But the bootloader is needed to unlock (you can google this problem, it's easy to perform). Then you go to firmware.center, find rom Asia with android 7 and flash it to the phone.
If the lcd is not on when you connect to PC, here is the method: https://forum.xda-developers.com/moto-x-style/help/solved-hard-brick-moto-x-style-xt1572-t3693860
Click to expand...
Click to collapse
It turns on and boots to bootloader but I tried to unlock the bootloader but it says you should allow bootloader oem unlock in developer options , and I can't access that obviously
So you can try to flash the firmware without flashing gpt.bin; bootloader.img; boot.img; recovery.img
Or you can try to make an sdcard like the link I mentioned before. Insert it to the phone and try to flash the firmware then.
mr_5kool said:
So you can try to flash the firmware without flashing gpt.bin; bootloader.img; boot.img; recovery.img
Or you can try to make an sdcard like the link I mentioned before. Insert it to the phone and try to flash the firmware then.
Click to expand...
Click to collapse
This the problem I tried every rom I cloud but none of it worked
If the phone can enter bootloader, the easiest way is to flash the newest firmware to the phone for both situations: locked or unlocked bootloader. My Verizon Droid Turbo had been soft-bricked when it was on Android 5. When android 6 came, it resurrected.
If a firmware is successfully flashed to the phone, it can start up normally or be stuck at logo. If it is stuck, enter recovery mode and factory reset.
There is one last method with super high risk: break the bootloader then resurrected by sdcard. One of my phone has died before, so never use this method if you don't have experience.
I mentioned everything I know. If your phone does not start, you may need another one.
I'm sorry that it does not help
Can Any Buddy Find The Right Frimware Based On This Info For Me I Need It ASAP Thanks
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8992-A0.52
(bootloader) product: clark
(bootloader) board: clark
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x1
(bootloader) emmc: 16GB Samsung REV=07 PRV=01 TYPE=57 PNM=AGND3R
(bootloader) ram[0]: 3072MB SK Hynix S8 SDRAM DIE=6Gb M5=x6 M6=x3 M7=x0
(bootloader) ram[1]: M8=x3B
(bootloader) cpu: MSM8992
(bootloader) serialno: TA08305BXS
(bootloader) cid: 0x0007
(bootloader) channelid: 0x52
(bootloader) uid: B02FEA001E000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Reboot mode set to fastboot
(bootloader) imei: 352342070733563
(bootloader) meid:
(bootloader) date: 12-24-2015
(bootloader) sku: XT1572
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sat Jul 28 3:15:52 UTC 2018"
(bootloader) ro.build.fingerprint[0]: motorola/clark_retasia_ds/clark_ds
(bootloader) ro.build.fingerprint[1]: :5.1.1/LPH23.116-18/22:user/releas
(bootloader) ro.build.fingerprint[2]: e-keys
(bootloader) ro.build.version.full[0]: Blur_Version.23.21.18.clark_retas
(bootloader) ro.build.version.full[1]: ia_ds.retasia.en.03
(bootloader) ro.build.version.qcom: <not found>
(bootloader) version-baseband[0]: M8992_1255309.10.01.68R FSG-8994-01.71
(bootloader) version-baseband[1]: _CLARK_EMEA_DSDS_CUST+SW_DFLT
(bootloader) kernel.version[0]: Linux version 3.10.49-perf-ge36128e (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9.x-goog
(bootloader) kernel.version[2]: le 20140827 (prerelease) (GCC) ) #1 SMP
(bootloader) kernel.version[3]: PREEMPT Thu Jul 30 14:36:15 CDT 2015
(bootloader) sbl1.git: git=MBM-NG-VA0.52-0-g17b2538
(bootloader) rpm.git: git=90a41be
(bootloader) tz.git: git=2d08904-dirty
(bootloader) hyp.git: git=2d08904-dirty
(bootloader) sdi.git: git=d9f358f
(bootloader) pmic.git: git=MBM-NG-VA0.52-0-g17b2538
(bootloader) aboot.git: git=MBM-NG-VA0.52-0-g69ca042
(bootloader) qe: qe 0/0
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retmea
all: listed above
finished. total time: 0.116s