Database Users

[PROJECT][WIP] Port TW 4.4.2 to N7000

Hi,
First of all, everyone knows (or should know) that we never will receive KK TW update of Samsung. So I propose you to create a "team" to port the TW 4.4.2 to our Note.
You can see that it's possible/will be possible, so don't bloat/blame this theard :
S3 Port : http://forum.xda-developers.com/gal...4-2-archiport-temporary-experimental-t2748579
S2 Port : http://forum.xda-developers.com/galaxy-s2/development-derivatives/wip-ormusromv1-t2768373
Members :
@Alek7
@forest1971
@Junaid1460
@igorescu04
@NoteboyTech
Do you want to see TW KitKat on your Note ? Give your answers in the poll

Changlog/statut
- TW KK ROM build @Junaid1460
- Modified kernel for TW KK port build @forest1971
- Kernel boots
- Getting bootanimation
To do list
- Do a lot of changes

Totaly awesome... hope devs join your project and make this possible.
You can mark me as a tested is this go on
:good::good::good:

Everyone is lazy.. Help yourself
Sent from my GT-N7000 using Tapatalk

progress of my version of rom
progress:
[kernel:-]
partially working kernel
ramdisk work completed need to compile and test
[rom:-]
have two versions
1)bootable and botanimation working with some cm11 libs
2)bootable but no bootanimation but going so far till package parser
[currently working on:-]
kernel(ramdisk)
HTML:

Can anyone ask for the log of the s3 kernel to see what does and charge at boot ?

Junaid1460 said:
I had made a installable package
its installing perfectly
but no boot I guess the problem with the kernel
preload is also perfect
I don't have a perfect tool to edit kernel
---------- Post added at 01:06 PM ---------- Previous post was at 12:48 PM ----------
I can say for sure when galaxy s2 get a successfull port
then it is easy for our device to port because s2 and note share
smdk4210 chipset
Click to expand...
Click to collapse
Can you upload the ROM ? I will try to help you because I haven't much time now (exams) to build it from the beginning

Alek7 said:
Can you upload the ROM ? I will try to help you because I haven't much time now (exams) to build it from the beginning
Click to expand...
Click to collapse
I'm rebuilding the rom now
I asked for help in kernel setup
he told
1)decompile both kernel
2)zimage(base kernel)------->replacing(port)
3)change some /dev/block
etc.....
I'm doin it now
I'm using archi port
prefer justarchi github repository

Junaid1460 said:
I'm rebuilding the rom now
I asked for help in kernel setup
he told
1)decompile both kernel
2)zimage(base kernel)------->replacing(port)
3)change some /dev/block
etc.....
I'm doin it now
I'm using archi port
prefer justarchi github repository
Click to expand...
Click to collapse
OK Thanks a lot for your contribution for this project :laugh::good: But I think you don't have to modify the kernel,, forest will do it.
@forest1971
Ok. Will try to work on ut now that I just completed the latest version of my jb kernel.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse

Alek7 said:
OK Thanks a lot for your contribution for this project :laugh::good: But I think you don't have to modify the kernel,, forest will do it.
Click to expand...
Click to collapse
IS IT THEN I NEED KERNEL DOWN LINK
the rom is proper and only need to boot
well i will do some more changes and merge forest and n2 kernel
thnx

Junaid1460 said:
IS IT THEN I NEED KERNEL DOWN LINK
the rom is proper and only need to boot
well i will do some more changes and merge forest and n2 kernel
thnx
Click to expand...
Click to collapse
No, forest is making it with JustArchi github, it isn't finished yet. I think you won't have to merge forest and n2 kernel because he will make it too

Alek7 said:
No, forest is making it with JustArchi github, it isn't finished yet. I think you won't have to merge forest and n2 kernel because he will make it too
Click to expand...
Click to collapse
It is not a piece if cake. Please go ahead with any attempts with kernel and do not wait. Cheers.
Sent from my GT-N7000 using Tapatalk 2

This is a kernel version with modified ramdisk.
http://www.mediafire.com/download/ldntupd5xvjvf11/Forest-twkk.zip
I probably should work for TW-KK port.
At least it will boot and has adb working and recovery working.
In case port rom not working you can adb reboot to recovery and get back to your backup rom.
I have also enabled logcat so u can take logcat to debug the port rom.
No guarantee through:laugh:. GL.

Let us know the rezults
Enviado desde mi GT-N7000 mediante Tapatalk

oooooops
oooooops logcat lot errors
see the attachment
suggest me some thing
what to do next
one good thing is that i guess kernel booting
got logcat so
if there is kernel related thing
then it is work for @forest1971
else you tell wat to do
i have not seen logcat...sleepy

I will work more on it. Cheers.
Sent from my GT-N7000 using Tapatalk 2

till now i have taken cm11as base rom
but no more
it sucks in blank screen
tmorrow start again with stock
n7000 stock 4.1.2 to n7100 stock 4.4.2
i hope the success
and also any more who build rom in a new way
may be kernel is phising or rom
try with archi kitchen
.........etc

looks like no one interested
I quit....
but I try by my self
referring s2 wip

Junaid1460 said:
looks like no one interested
I quit....
but I try by my self
referring s2 wip
Click to expand...
Click to collapse
He, me and forest are still working on it, but we will be able to do more if you upload the ROM :laugh:

Alek7 said:
He, me and forest are still working on it, but we will be able to do more if you upload the ROM :laugh:
Click to expand...
Click to collapse
I'll upload it by today
I have lot more zip but this one rar
this one i have not tested
i managed to delete some apps
there may be some problem with preload symlinking
so delete some un used libraris from /system/lib
ex:chatton.****.so
face rec***.so
delete some apps for temporary boot
hope you understood
uploading 17% complted on mediafire

Test build

Hello everyone.
http://download.jgcaap.xyz/files/bullhead/cm-13.0/
Would like to request if possible if someone could test this build
This build is based on CM device tree kernel and blobs, which shouldn't cause any issues on flashing.
As a test, please remember i'm not responsible to any damage which might occurr.
The worst thing might happen is not booting.
This rom is like flashing a CM nightly.
I'm interested on expanding my work between diferent devices. So please let me know how it goes.
Please list the bugs.
F2FS is compatible with this device?
source https://github.com/CyanogenMod/android_kernel_lge_bullhead
Thank you

jgcaap said:
Hello everyone.
http://download.jgcaap.xyz/files/bullhead/cm-13.0/
Would like to request if possible if someone could test this build
This build is based on CM device tree kernel and blobs, which shouldn't cause any issues on flashing.
As a test, please remember i'm not responsible to any damage which might occurr.
The worst thing might happen is not booting.
This rom is like flashing a CM nightly.
I'm interested on expanding my work between diferent devices. So please let me know how it goes.
Please list the bugs.
F2FS is compatible with this device?
Thank you
Click to expand...
Click to collapse
Please add a direct link to kernel source used as required by XDA and GPLv2...thanks. And thanks for your contribution.

KennyG123 said:
Please add a direct link to kernel source used as required by XDA and GPLv2...thanks. And thanks for your contribution.
Click to expand...
Click to collapse
It's stock from CM. I'll open a new post under development thread if everything goes well on tests and add all source links there. Is it ok? thanks

jgcaap said:
It's stock from CM. I'll open a new post under development thread if everything goes well on tests and add all source links there. Is it ok? thanks
Click to expand...
Click to collapse
The only thing considered stock is direct from the manufacturer, LG or Google. CM is not a stock OS, therefore if you are distributing the binary (boot.img) in your link then you must post a link to the kernel source compiled to make it. Otherwise you need to remove the boot.img and let people get their own kernel.
Thanks

KennyG123 said:
The only thing considered stock is direct from the manufacturer, LG or Google. CM is not a stock OS, therefore if you are distributing the binary (boot.img) in your link then you must post a link to the kernel source compiled to make it. Otherwise you need to remove the boot.img and let people get their own kernel.
Thanks
Click to expand...
Click to collapse
done Thanks for clarifying.

Hello @jgcaap
i will test and report back
thanks for supporting 5x and 6p (i have both)
edit: i'm using F2FS and un-encrypted. I've had to change the kernel to jolla's, to make it boot. It does not boot on stock kernel.
everything else seems to be working fine.

CM13 build error

Hi!
I'm trying to build CM13 for our device, but I get some error at the beginning of compilation. Something about libinit_msm_intermediates.
Here is build log.
I attached my local_manifest.xml. It looks like I need some additional repos. Can anyone help me?

@nikita36078, it seems ur missing device/qcom/common add it in ur roomservice.xml
https://github.com/Cyanogenmod/android_device_qcom_common

@adityaupreti, thank you, it solved the problem

adityaupreti said:
@nikita36078, it seems ur missing device/qcom/common add it in ur roomservice.xml
https://github.com/Cyanogenmod/android_device_qcom_common
Click to expand...
Click to collapse
hi, i want official cyanogenmod for s3 neo i9300i without any bugs.
if you know send me link on [email protected]

There isnt a official Cyanogenmod for our device. Rox has built an unofficial CM 12.1. You can try it. But NFC does not work (but I never use it so it's no problem haha)

nikita36078 said:
Hi!
I'm trying to build CM13 for our device, but I get some error at the beginning of compilation. Something about libinit_msm_intermediates.
Here is build log.
I attached my local_manifest.xml. It looks like I need some additional repos. Can anyone help me?
Click to expand...
Click to collapse
Oooh thank you thank you thank you again A LOT for building CM13 for the S3 neo :victory: this news just made my day a whole lot better Sir, you are awesome and this community is awesome! :victory:
If the rom booted we can get some help squeezing the bugs from other people here and from the people in the Galaxy Grand 2 forum they are so similar devices and the Grand 2 got some stable AOSP MM builds. :highfive:

Thank you so much for your work, Nikita! *-*

nikita36078 said:
Hi!
I'm trying to build CM13 for our device, but I get some error at the beginning of compilation. Something about libinit_msm_intermediates.
Here is build log.
I attached my local_manifest.xml. It looks like I need some additional repos. Can anyone help me?
Click to expand...
Click to collapse
nothing?

Building Cyanogenmod

Hi there,
Having seen that this device is gaining popularity in the Southeast Asian region, I have taken the time to start an unofficial development of CM for this device. Right now, having gotten the kernel to build but without the device I won't be able to extract the required blobs and such to start a device tree. So I'm asking here if you guys wanted to help and extract the blobs using the method here: https://wiki.cyanogenmod.org/w/Doc:_porting_intro
Build a device tree based on @hondajohn88 repo and right now doing changes to it to support CM.
https://github.com/webhaikal/android_device_leeco_zl1
You can use this for Method 1 in the porting intro: https://www.androidfilehost.com/?fid=529152257862684212. You either need a Linux distro or Ubuntu Bash on Windows..
Here's the kernel I build: https://www.androidfilehost.com/?fid=529152257862684239
As I don't have the financials to actually buy the device, that's why I'm asking here...
Thank you..

I really don't know anything about building ROMs, but reading method 1 all you need is boot.img?

Hi, me, @hondajohn88 and someone else are working on a source build. Please dig in github for device tree and so on.
Let's keep in touch!
edit: checked updater script and it is referred to Xiaomi device (ferrari). Is that ok?

haikalizz said:
Hi there,
Having seen that this device is gaining popularity in the Southeast Asian region, I have taken the time to start an unofficial development of CM for this device. Right now, having gotten the kernel to build but without the device I won't be able to extract the required blobs and such to start a device tree. So I'm asking here if you guys wanted to help and extract the blobs using the method here: https://wiki.cyanogenmod.org/w/Doc:_porting_intro
You can use this for Method 1 in the porting intro: https://www.androidfilehost.com/?fid=529152257862684212. You either need a Linux distro or Ubuntu Bash on Windows..
Here's the kernel I build: https://www.androidfilehost.com/?fid=529152257862684239
As I don't have the financials to actually buy the device, that's why I'm asking here...
Thank you..
Click to expand...
Click to collapse
Check out my vendor repo on git hub. It has most of the blobs but I haven't added the rest. I might be able to do that later today.
https://github.com/hondajohn88

hondajohn88 said:
Check out my vendor repo on git hub. It has most of the blobs but I haven't added the rest. I might be able to do that later today.
https://github.com/hondajohn88
Click to expand...
Click to collapse
Question, your device tree is based on Kenzo? Or is the specsheet not updated?

haikalizz said:
Question, your device tree is based on Kenzo? Or is the specsheet not updated?
Click to expand...
Click to collapse
Sorry about that, yes, the spec sheet not updated.
Later this evening I'll try to get everything I have updated to git, but what's there now is a decent start (my first commit, so there are a few changes)

hondajohn88 said:
Sorry about that, yes, the spec sheet not updated.
Later this evening I'll try to get everything I have updated to git, but what's there now is a decent start (my first commit, so there are a few changes)
Click to expand...
Click to collapse
One thing when building the kernel, there are a few includes that needs to be fixed. The commit that fixes it can be found on marlin (Google Pixel) kernel on Cyanogenmod github...

http://opensource.le.com

haikalizz said:
One thing when building the kernel, there are a few includes that needs to be fixed. The commit that fixes it can be found on marlin (Google Pixel) kernel on Cyanogenmod github...
Click to expand...
Click to collapse
Ah, thanks...I've been having issues with that Damn thing. I'll look into it, thank you

Flounderist said:
Hi, me, @hondajohn88 and someone else are working on a source build. Please dig in github for device tree and so on.
Let's keep in touch!
edit: checked updater script and it is referred to Xiaomi device (ferrari). Is that ok?
Click to expand...
Click to collapse
Yikes, updater script in my repo? Sigh, so much to look into...
Time for beer.

I think using a device that has a SD821 would be a better starting point than kenzo.

Flounderist said:
Hi, me, @hondajohn88 and someone else are working on a source build. Please dig in github for device tree and so on.
Let's keep in touch!
edit: checked updater script and it is referred to Xiaomi device (ferrari). Is that ok?
Click to expand...
Click to collapse
Oops forgot about the updater script.. Whats the device codename? ZL1?

haikalizz said:
Whats the device codename? ZL1?
Click to expand...
Click to collapse
I'm not sure about the codename. I think it's "le_zl1" at least this is what "ro.build.product" contains. Here some relevant properties from my LEX720 (the chinese version which has dual-sim):
Code:
[ro.build.product]: [le_zl1]
[ro.config.product]: [le_zl1]
[ro.product.device]: [le_zl1]
[ro.product.model]: [LEX720]
[ro.product.name]: [ZL1_CN]
[ro.bootimage.build.fingerprint]: [LeEco/ZL1_CN/le_zl1:6.0.1/WAXCNFN5801811012S/letv11011204:user/release-keys]
[ro.build.description]: [le_zl1-user 6.0.1 WAXCNFN5801811012S eng.letv.20161101.120034 release-keys]
[ro.build.fingerprint]: [LeEco/ZL1_CN/le_zl1:6.0.1/WAXCNFN5801811012S/letv11011204:user/release-keys]
[ro.build.display.id]: [WAXCNFN5801811012S release-keys]

androcheck said:
I'm not sure about the codename. I think it's "le_zl1" at least this is what "ro.build.product" contains. Here some relevant properties from my LEX720 (the chinese version which has dual-sim):
Code:
[ro.build.product]: [le_zl1]
[ro.config.product]: [le_zl1]
[ro.product.device]: [le_zl1]
[ro.product.model]: [LEX720]
[ro.product.name]: [ZL1_CN]
[ro.bootimage.build.fingerprint]: [LeEco/ZL1_CN/le_zl1:6.0.1/WAXCNFN5801811012S/letv11011204:user/release-keys]
[ro.build.description]: [le_zl1-user 6.0.1 WAXCNFN5801811012S eng.letv.20161101.120034 release-keys]
[ro.build.fingerprint]: [LeEco/ZL1_CN/le_zl1:6.0.1/WAXCNFN5801811012S/letv11011204:user/release-keys]
[ro.build.display.id]: [WAXCNFN5801811012S release-keys]
Click to expand...
Click to collapse
Could you extract a boot.img too? Alot of info could be extracted from it too...

goroflack said:
I think using a device that has a SD821 would be a better starting point than kenzo.
Click to expand...
Click to collapse
I agree, and I have since changed to using some of oneplus3. I hadn't changed the device spec on my repo, but merged the change given to me by @haikalizz.
Mostly I was using the Kenzo files as a template, but changed it up a short while after.
Thanks

haikalizz said:
Could you extract a boot.img too?
Click to expand...
Click to collapse
Yes, of course. This is the original unmodified boot.img of the chinese LEX720 model running the latest EUI version for the chinese model (5.8.018S). Note that for the US version there is already a newer release (5.8.019S).
I uploaded it here to my server: WAXCNFN5801811012S_boot.img

the lastest cho x720 is eui 5.9 20s which available from
http://bbs.ydss.cn/thread-714235-1-1.html

moneyrain said:
the lastest cho x720 is eui 4.9 20s which available from
http://bbs.ydss.cn/thread-714235-1-1.html
Click to expand...
Click to collapse
This is a custom release. Is there also somewhere an unmodified official download to look into? The OTA server still responds with version 018S for my device:
Click here for OTA Check
You have to replace the XXXXXX.. with your actual IMEI (and maybe also model and product) to get a response from this server.

im downloading the package. I will flash this build for test ( x720 is my 2nd phone )

moneyrain said:
im downloading the package. I will flash this build for test ( x720 is my 2nd phone )
Click to expand...
Click to collapse
Please, can you upload this ROM with download link?
Sent from my LEX720 using Tapatalk

Building CM-12.1 for SM-G531F

Hi,
I'm building CM-12.1 for SM-G531F (till I don't have it a bit stable I won't be able to make any more recent version anyway). Till now I built a TWRP 2.8.7.0, its a bit buggy and reboot after some time.
I built CM-12.1, it boots and runs, but Camera, WiFi, Bluetooth, Ril, sound are not working for now.
I'm wondering if anyone was still working on it and if you want to team up.
Sheers.

In case someone wants to dev for this phone, here's my repos (cm-12.1 boots):
https://github.com/Nemirtingas/android_hardware_marvell_pxa1908
https://github.com/Nemirtingas/android_hardware_mrvl_power
https://github.com/Nemirtingas/android_device_samsung_pxa1908-common
https://github.com/Nemirtingas/android_device_samsung_mrvl-common
https://github.com/Nemirtingas/android_device_samsung_grandprimevelte
https://github.com/Nemirtingas/android_vendor_samsung_grandprimevelte

A little update, Bluetooth & Wifi are fixed.

Nemirtingas said:
A little update, Bluetooth & Wifi are fixed.
Click to expand...
Click to collapse
Sound is working and now Baseband & IMEI is detected, but SIM card is not recognized. I'm working on RIL now. Hope to get a stable CM-12.1 Rom soon.
Camera still doesn't work though.

Nemirtingas said:
Sound is working and now Baseband & IMEI is detected, but SIM card is not recognized. I'm working on RIL now. Hope to get a stable CM-12.1 Rom soon.
Camera still doesn't work though.
Click to expand...
Click to collapse
Ril working :good:

And now, Camera works !

Keep on the good work!

Now working on android 6.0.
I tried 7.1 but its too buggy.

Nemirtingas said:
Now working on android 6.0.
I tried 7.1 but its too buggy.
Click to expand...
Click to collapse
can you upload a test build for bug testing bcoz i have a working twrp from 4pda 3.0.2

Munu Prakash Pattanaik said:
can you upload a test build for bug testing bcoz i have a working twrp from 4pda 3.0.2
Click to expand...
Click to collapse
working twrp

Munu Prakash Pattanaik said:
can you upload a test build for bug testing bcoz i have a working twrp from 4pda 3.0.2
Click to expand...
Click to collapse
Which one do you want actually ? 12.1, 13.0 or 14.1 ?

Nemirtingas said:
Which one do you want actually ? 12.1, 13.0 or 14.1 ?
Click to expand...
Click to collapse
13 and 14.1
---------- Post added at 06:17 AM ---------- Previous post was at 06:13 AM ----------
Munu Prakash Pattanaik said:
13 and 14.1
Click to expand...
Click to collapse
i can help you with bug fixing for both the versions ,,,, because my desktop does not have configurations to build a rom and I cannot provide a enough time.

Working on CM-13.0 now, Everything looks OK except video recording, picture works.
Is anyone willing to try it ?

Nemirtingas said:
Working on CM-13.0 now, Everything looks OK except video recording, picture works.
Is anyone willing to try it ?
Click to expand...
Click to collapse
I am, are you sure we're talking about The G531F, one with the 64 bit chipset Marvell 1908? I am willing to try it 13 or 14 whichever you have. Just want a stable environment where i could install few small apps and make a call without major slowdowns. I want to get rid of this stock rom. Twrp is installed.

Alpha8080 said:
I am, are you sure we're talking about The G531F, one with the 64 bit chipset Marvell 1908? I am willing to try it 13 or 14 whichever you have. Just want a stable environment where i could install few small apps and make a call without major slowdowns. I want to get rid of this stock rom. Twrp is installed.
Click to expand...
Click to collapse
Yes, that's the one. I'm working from scratch as there are no sources for Marvell. Its a 64bit Kernel with a 32bit ROM. You can check my github sources that I posted on my first quote.

Nemirtingas said:
Yes, that's the one. I'm working from scratch as there are no sources for Marvell. Its a 64bit Kernel with a 32bit ROM. You can check my github sources that I posted on my first quote.
Click to expand...
Click to collapse
Well i am no android developer but i can help you test out roms. I don't have the resource to build it. I am gonna need installable zip.

Alpha8080 said:
Well i am no android developer but i can help you test out roms. I don't have the resource to build it. I am gonna need installable zip.
Click to expand...
Click to collapse
Send me a private message so I can send you a dl link.
I'll have to clean the build & do a full rebuild, test the rom and upload it. I'll message you when its ready.

Nemirtingas said:
Yes, that's the one. I'm working from scratch as there are no sources for Marvell. Its a 64bit Kernel with a 32bit ROM. You can check my github sources that I posted on my first quote.
Click to expand...
Click to collapse
Man, i interesting in test this ROM in G531M. Some Link to download?

Erioernesto02 said:
Man, i interesting in test this ROM in G531M. Some Link to download?
Click to expand...
Click to collapse
Hi, this ROM is for SM-G531F, but you can find it here: https://forum.xda-developers.com/grand-prime/development/lineageos-13-0-grand-prime-velte-t3874411

Nemirtingas said:
Hi, this ROM is for SM-G531F, but you can find it here: https://forum.xda-developers.com/grand-prime/development/lineageos-13-0-grand-prime-velte-t3874411
Click to expand...
Click to collapse
Thanks a lots bro.