Good evening
There was a problem charging my oneplus 5 battery and When I took it to the maintenance shop they said there was a Problem in Fpc Connector ,
I looked for these piece and did not find it , what is the solution now pleas?
Related
ok, the connector is broken.
I disassembled cover parts,
fixed connector,
I'm sure there is 5V inside (the connector inside I measure by voltagemeter) when I plug-in the external charger. The connector has 3 pins for GND and 3 pins for 5V and I'm sure there is volatage inside.
But the battery is not charging. O/S say the battery status as remained, but do to charge.
how to fix? what next to check?
crying:
You could check to see if the protection fuse has blown, if so you can bridge the circuit, if you search for charging or charge on the forum you will find pictures and methods.
the protection fuse just beside the battery? under small piece of white scotch tape?
fixed
thanks for suggestion.
yes, it was broken micro fuse, the one right beside the connector pins on motherboard.
Glad to be of assistance, hope its all ok now. 8)
help
Hi Jgui, could you tell me how you managed to repair borken connector at th bottom??
I search for a repair shop for my MDAII or th way to do it myself...
thanks a lot for your answer
hey all these days my wizard would sync perfectly but today it jsut charges and doesn't sync i did a hard reset but still don't work .. i tried in a different computer and it doesn't even identify it
anyone have this problem???
had the same problem. all days it worked and then suddenly just charging (no sync, no identification). I also did a hard reset but this changed nothing. then I did not use my wizard quite a while (about 3 months)...tried it again and it worked perfectly fine. i have no idea where the problem was...so mate I have no idea how to solve it but you see...there was a happy end
I just got given a Wizard and it's got this problem too, charging but no sync. Problem with mine looks like a damaged mini USB connector. I can see that the plastic in front of one of the pins on the bottom of the phone is broken.
This thread http://forum.xda-developers.com/showthread.php?t=300240 has some suggestions on where to get replacement connectors.
biofidius said:
I just got given a Wizard and it's got this problem too, charging but no sync. Problem with mine looks like a damaged mini USB connector. I can see that the plastic in front of one of the pins on the bottom of the phone is broken.
This thread http://forum.xda-developers.com/showthread.php?t=300240 has some suggestions on where to get replacement connectors.
Click to expand...
Click to collapse
how easy is to replace this connector.
i have replaced the screen and got all the way down to the MOBO but i didnt see that mini connector.
edit: i meant i did see the connector but its soldered to the MOBO so i was wondering if this can be replaced.
im having the same problem
In the forum link I posted above people have said that you can damage your MOBO easily if the PCB gets too hot when soldering.
I have access to a hot air tool used for SMD components, which lets me heat all the pins on the mini USB connector evenly. Using a soldering iron would be more difficult and increase the chances of damaging the MOBO.
Hi,
I have started to face an issue recently with my Dell Streak 5 when I accidentally bent some pins while I was trying to receive a call and the phone was charging. Although, I can still charge the phone, I need to know whether I can get a replacement for the 30 pin connector for my device. I got it through ebay from one of the seller in US. What can/should I do ? I don't think the connector is user replaceable and if it is how difficult it will be for me ? Will it require soldering ?
Hi guys i have TL W-9208
a guy gave me because its battery connector pins are broken and the phone wasnt opening..i tryed to fix it with kalai(in greek) its soldering iron i think(this is: http://cdn.instructables.com/F8Q/NF5Q/0DIEWP8729Q/F8QNF5Q0DIEWP8729Q.MEDIUM.jpg), also i putted some in battery to make better connection
and the result is:
http://i.imgur.com/vbs74JV.jpg
http://i.imgur.com/v54FPIy.jpg
the phone works but sometimes after moves it shutdown..how can i fix this? its because it has bad connection or what?
Does anyone know where to find this battery to buy new?
also can i replace the battery connector with battery connector from another phone with 3 pins?
Thanks in advance
Well find alternatives on ebay or use that battery. Use hot glue to secure battery temporarily if loose connection occur. Remove useless app and less frequent charging will prolong its life or contact any eletronic/mobile shop. Hope this helps.
Dude it happened to me. I got a symbian phone whose battery was 7 yrs old but still it worked briliantly. Although i find a battery but its size was small and i used hot glue to firmly held it. It worked well. But last year it got stolen. I miss that unique phone. It was preloaded with band &oulsfeng amplifier. Checkout samsung SGH-i450 on internet.
Hi,
I hope you all doing well , I have a big problem with my Nokia 5 , Days ago he started pausing charge randomly , I thought it was a virus that ruined the soft so i did hard reset but it didn't get solved , so i i searched the internet about the problem and found an article talking about dust and oxidation that can interfere with the charging process , so i cleaned it well the micro USB port with alcohol and a needle and it worked and he charged to 43 % from 12% but unfortunately he came back to the same problem and every time i have to put some alcohol and clean it so it can charge . I know it's weird but any one has any solutions ?
Thanks a lot for your time and i appreciate any help .
Had the same experience, problem with mine was replacing the charging port board.
Can be ordered online though AliExpress and it's very cheap