Hi, I have Erisin ES9000A Android 4.2.2 Car DVD radio in my VW Passat B6,
Yesterday when I tried to enable, but it lock on boot screen and so it stayed, what can I do?
Flash the software? Where I can find the rom for my radio?
Hi
have you fixed it? I got same problem with 7.1 model, the quality is so poor. Saw a lot same problems here.
AndroidFun2018 said:
Hi
have you fixed it? I got same problem with 7.1 model, the quality is so poor. Saw a lot same problems here.
Click to expand...
Click to collapse
Hi,
I flash the new software and it works fine
mercedres1 said:
Hi,
I flash the new software and it works fine
Click to expand...
Click to collapse
my android HU doesn't have a physical power button, and cannot go to recovery mode
Related
Hi! I've a JY RK3066 with Malaysk rom and wonder if could be possible to get the image from backup camera as soon as I turn on the unit. I've been reading that the backup camera comunicates directly with the MCU so it should be a turn on and view..... Any help?
Thanks in advance.
solmer said:
Hi! I've a JY RK3066 with Malaysk rom and wonder if could be possible to get the image from backup camera as soon as I turn on the unit. I've been reading that the backup camera comunicates directly with the MCU so it should be a turn on and view..... Any help?
Thanks in advance.
Click to expand...
Click to collapse
delete
solmer said:
Hi! I've a JY RK3066 with Malaysk rom and wonder if could be possible to get the image from backup camera as soon as I turn on the unit. I've been reading that the backup camera comunicates directly with the MCU so it should be a turn on and view..... Any help?
Thanks in advance.
Click to expand...
Click to collapse
Connect video coaxial from camera to the radio
The radio should have a line named BACK or REVERSE, this is an INPUT that should be connected to the +12V from Back Up Light or similar, this way the radio will switch to Rear Camera Input when reverse gear is selected.
etulio said:
Connect video coaxial from camera to the radio
The radio should have a line named BACK or REVERSE, this is an INPUT that should be connected to the +12V from Back Up Light or similar, this way the radio will switch to Rear Camera Input when reverse gear is selected.
Click to expand...
Click to collapse
Hi !,Thanks for your input, I've already conected the camera as you told me and works but the problem is that I need to wait until the unit boot to get the image from the backup camera. Some time ago I got the image before booting the unit, just turning the radio on. I've tried to change the MCU firmware (I was running the 2.73 from DarkLeo) and now I'm using 2.59 with the same result.... :crying:
solmer said:
Hi !,Thanks for your input, I've already conected the camera as you told me and works but the problem is that I need to wait until the unit boot to get the image from the backup camera. Some time ago I got the image before booting the unit, just turning the radio on. I've tried to change the MCU firmware (I was running the 2.73 from DarkLeo) and now I'm using 2.59 with the same result.... :crying:
Click to expand...
Click to collapse
Hi, I get image from the camera as soon as I put the reverse gear, I do not have to wait for Android to boot. As you said, camera is connected to MCU and does not need to wait for Android.
etulio said:
Hi, I get image from the camera as soon as I put the reverse gear, I do not have to wait for Android to boot. As you said, camera is connected to MCU and does not need to wait for Android.
Click to expand...
Click to collapse
Ummm could be a problem with the ROM or MCU? Could you tell me which ROM and MCU are you using?.
Thansk in advance !!:good:
solmer said:
Ummm could be a problem with the ROM or MCU? Could you tell me which ROM and MCU are you using?.
Click to expand...
Click to collapse
I have a Joying 5.1 with the original ROM and MCU
etulio said:
I have a Joying 5.1 with the original ROM and MCU
Click to expand...
Click to collapse
Ummm I've another unit (JY with RK3066 CPU, dual core....)
I'm gonna try to put another MCU.
Thanks !
Hello, im after a little help - I have an A-Sure 5.1.1 intel sofia - mcu KYD_(7706)_90_C9_V1.00_CAN
It has had a few software issues and after some research I found this site and managed to gain root using the ADB Wireless method. (brilliant tutorial, thank you) Its better than it was but its still has features locked down and the update interface just crashes.
Are custom roms available for the sofia units?
I'm struggling with recovery mode i can use an app to boot into recovery. but I get NO command. The unit has touch buttons power, home , back, volume + , volume - I have tried power then vol up / down but thats not working. Help and advice please ?
I also have the usb DAB dongle for this - its working well with my amplified DAB aerial (Gti bee sting type) The DAB app is awful and lacks station logos, is there an alternative or modified version available?
Rick
Rick-W said:
Hello, im after a little help - I have an A-Sure 5.1.1 intel sofia - mcu KYD_(7706)_90_C9_V1.00_CAN
It has had a few software issues and after some research I found this site and managed to gain root using the ADB Wireless method. (brilliant tutorial, thank you) Its better than it was but its still has features locked down and the update interface just crashes.
Are custom roms available for the sofia units?
I'm struggling with recovery mode i can use an app to boot into recovery. but I get NO command. The unit has touch buttons power, home , back, volume + , volume - I have tried power then vol up / down but thats not working. Help and advice please ?
I also have the usb DAB dongle for this - its working well with my amplified DAB aerial (Gti bee sting type) The DAB app is awful and lacks station logos, is there an alternative or modified version available?
Rick
Click to expand...
Click to collapse
I have the same unit same MCU. Which tutorial did you use to root it?
me too...help
ilsaggio73 said:
me too...help
Click to expand...
Click to collapse
I managed to root it after all yesterday using this tutorial.
https://forum.xda-developers.com/showpost.php?p=69648860&postcount=84&nocache=1&z=8361786322568856
Hi after few days of updating to android 6 i have a serious problem with GPS fixing... despite the software find a lot of satellites it can't fix the signal... i juat tried to use some softwares like gps data or gps test to delete and update gps files, but it still has the same problem... i'm very bored.. anyone has my same problem and fixed it?
Please help me...
Sorry for my bad english
Inviato dal mio iPhone utilizzando Tapatalk
someone tried to put android 7?
good evening, I have an android erisin ES3261F and I wanted to know if it was possible to download a new software since I tried bugs with the original one. Sometimes it no longer reads the can-bus control unit and the application of the radio overlaps the writing of the frequency with that of the song titles.
MCU: T5.3 19-94-98-E03101-180116
System version: V8.3.2_20180313.113333_HC1-N6502
lucase94 said:
good evening, I have an android erisin ES3261F and I wanted to know if it was possible to download a new software since I tried bugs with the original one. Sometimes it no longer reads the can-bus control unit and the application of the radio overlaps the writing of the frequency with that of the song titles.
MCU: T5.3 19-94-98-E03101-180116
System version: V8.3.2_20180313.113333_HC1-N6502
Click to expand...
Click to collapse
I can't remember what model I have but it's an Erisin Unit and mine does the same thing also.
Good evening i have the same model ES3261F, and i have the same problem, any ideas?
MCU: T5.3.19-94-952-E03101-180116
System version : V8.3.2_20180313. 113333_HC1-N6502
thanks
Sbubba said:
Good evening i have the same model ES3261F, and i have the same problem, any ideas?
MCU: T5.3.19-94-952-E03101-180116
System version : V8.3.2_20180313. 113333_HC1-N6502
thanks
Click to expand...
Click to collapse
hi, do you have the firmware of your version? I have an older version that has problems with bluetooth
Francesco99112 said:
hi, do you have the firmware of your version? I have an older version that has problems with bluetooth
Click to expand...
Click to collapse
hi, i have android 7.1.1, and no problem with bluetooth, do you have problem with canbus and the radio?
Hi all,
in the forum I found a package from Erisin containing Android 10. Does anyone know if and how this can be applied to a Fake-Android 10 device like my ES8129D? Normal update process seems not to work
Any hint is highly welcome
CU
Peter
goy2k said:
Hi all,
in the forum I found a package from Erisin containing Android 10. Does anyone know if and how this can be applied to a Fake-Android 10 device like my ES8129D? Normal update process seems not to work
Any hint is highly welcome
CU
Peter
Click to expand...
Click to collapse
Mine seems to be the same try hal9k Rom with the normal process not working did you manage to update yours
Skiller7891 said:
Mine seems to be the same try hal9k Rom with the normal process not working did you manage to update yours
Click to expand...
Click to collapse
hal9k is only for MTC or HTC, mine is S32F0. Unfortunatly the "normal" Update process did not work.
Hello everyone,
Firstly, sorry for my bad english i'm french ....
I'm searching explanations and any help about strange things on my first android head unit (replacing my Audi RNSE in my S3 2007)
I bought an XTRONS IB80A3ALN last week
Works like intended but need more personalisation so i decide to flash with HAL9K ROM.
Flash works properly but when unit reboot got a black screen with some white bars moving on the screen and unit stay like this, can't see anything.
I try many things like recovery, same black screen and i don't do a dump before flashing, my fault i discover .....
But before flashing i take some screenshot to show to my brother.
First thing, serial number on the sticker and in the About are not the same, is it normal ?
Second thing, in the About model it's PX5(1280x720) but according to XTRONS website it's 1024x600, is it normal ?
Third thing (and i make lot's of research here) the MCU in the About show MTCH_LM_V3.75_1, but according to my research LM is for Erisin/Pumpkin not for XTRONS which should be GS, right or not ?
So i'm confused with this unit, i ask my reseller and XTRONS support, no one respond since 5 days, would get at least original stock firmware and mcu to try to flash.
I search a proper firmware and MCU but nothing (could latest MTCE be flashed on a MTCH ???)
I am able to enter MASKROM and dependind to which uboot and recovery.img i flashed i'm able to get fastboot working through usb, but always with black screen
Any explanations/help/files will be very appreciated
With my best regards,
Thibaut
Thibs24400 said:
Hello everyone,
Firstly, sorry for my bad english i'm french ....
I'm searching explanations and any help about strange things on my first android head unit (replacing my Audi RNSE in my S3 2007)
I bought an XTRONS IB80A3ALN last week
Works like intended but need more personalisation so i decide to flash with HAL9K ROM.
Flash works properly but when unit reboot got a black screen with some white bars moving on the screen and unit stay like this, can't see anything.
I try many things like recovery, same black screen and i don't do a dump before flashing, my fault i discover .....
But before flashing i take some screenshot to show to my brother.
First thing, serial number on the sticker and in the About are not the same, is it normal ?
Second thing, in the About model it's PX5(1280x720) but according to XTRONS website it's 1024x600, is it normal ?
Third thing (and i make lot's of research here) the MCU in the About show MTCH_LM_V3.75_1, but according to my research LM is for Erisin/Pumpkin not for XTRONS which should be GS, right or not ?
So i'm confused with this unit, i ask my reseller and XTRONS support, no one respond since 5 days, would get at least original stock firmware and mcu to try to flash.
I search a proper firmware and MCU but nothing (could latest MTCE be flashed on a MTCH ???)
I am able to enter MASKROM and dependind to which uboot and recovery.img i flashed i'm able to get fastboot working through usb, but always with black screen
Any explanations/help/files will be very appreciated
With my best regards,
Thibaut
Click to expand...
Click to collapse
You should be able to install Malaysk ROM which will solve all of your problems.
Thanks, i will try later, not sure how to flash Malaysk rom in maskrom
Thibs24400 said:
Thanks, i will try later, not sure how to flash Malaysk rom in maskrom
Click to expand...
Click to collapse
It's really simple. Find the appropriate Malaysk ROM thread here on XDA and follow the instructions
Ah yes i have the rom, my main problem is that the screen show only black and some white column moving
Thibs24400 said:
Ah yes i have the rom, my main problem is that the screen show only black and some white column moving
Click to expand...
Click to collapse
Did this happen by itself or you did you do a firmware update?
By itself when i power up my car
Thibs24400 said:
By itself when i power up my car
Click to expand...
Click to collapse
If you are still within 12 months warranty, just return it.
Yes sure it would be better but because when in reverse gear the screen works i'm searching solution waiting for xtrons to allow me to return the unit ........