Hello.
I've tried to install Xposed on my LG G6 H870 and now it's stuck on a bootloop logo.
I have TWRP and tried to reflash it but that didn't fix the issue.
Any idea how I can fix that.
Thank you.
Alright never mind the phone solved the issue itself after like 15 minutes go figure..
Thanks anyway.
You mean it eventually booted up? Did the install work?
Related
Experienced a really annoying problem today. My phone was in my pocket and I heard the LG boot up sound, so I figured the phone just randomly rebooted (happens about once a month, so very rate). When I checked the phone, I was at the LG initial setup screen, and all my days was gone.
I was running KitKat D80220b, with root and twrp installed. Since G2 xposed was just updated, I tweaked for custom navigation buttons and bleed immersive mode. Has this happened to anyone ?
For now, I reinstalled D80220c and will only root, and probably wait till G2 xposed becomes more stable on KitKat. Thoughts, anybody ?
ganja_guru said:
Experienced a really annoying problem today. My phone was in my pocket and I heard the LG boot up sound, so I figured the phone just randomly rebooted (happens about once a month, so very rate). When I checked the phone, I was at the LG initial setup screen, and all my days was gone.
I was running KitKat D80220b, with root and twrp installed. Since G2 xposed was just updated, I tweaked for custom navigation buttons and bleed immersive mode. Has this happened to anyone ?
For now, I reinstalled D80220c and will only root, and probably wait till G2 xposed becomes more stable on KitKat. Thoughts, anybody ?
Click to expand...
Click to collapse
I also have the "G2 Xposed" and I've never had any problems ... probably the hard reset is enough to solve the problem
ganja_guru said:
Experienced a really annoying problem today. My phone was in my pocket and I heard the LG boot up sound, so I figured the phone just randomly rebooted (happens about once a month, so very rate). When I checked the phone, I was at the LG initial setup screen, and all my days was gone.
I was running KitKat D80220b, with root and twrp installed. Since G2 xposed was just updated, I tweaked for custom navigation buttons and bleed immersive mode. Has this happened to anyone ?
For now, I reinstalled D80220c and will only root, and probably wait till G2 xposed becomes more stable on KitKat. Thoughts, anybody ?
Click to expand...
Click to collapse
I think the same crap happened to me. Check THIS Post I made back at the AEON thread. I haven't been able to boot my phone correctly this last two days.It keeps rebooting after a minute or so after booting. Very annoying and even worse that I don't what caused this crap. If you got any possible solution and can help me get out of this reboot loop it would be very appreciated.
Kenepo said:
I think the same crap happened to me. Check THIS Post I made back at the AEON thread. I haven't been able to boot my phone correctly this last two days.It keeps rebooting after a minute or so after booting. Very annoying and even worse that I don't what caused this crap. If you got any possible solution and can help me get out of this reboot loop it would be very appreciated.
Click to expand...
Click to collapse
Maybe it's a stuck power button? If not, have you tried going back to stock using the LG flash tool?
Hello, I recently got a d803 and decided to root it which went well, but after I rooted it I installed TWRP custom recovery and then things started going downhill. I'm not sure what exactly happened after that but I rebooted and i kept getting an loop of ui crashes and system crashes so I restarted in recovery mode and tried doing a factory reset. After the reset the problem stayed with everything crashing as soon as I boot, so I tried another factory reset. After the next factory reset I have been getting stuck at the LG Boot Screen. How can I fix this and go back completely to stock?
Please and thank you!!
You can try this to go back to stock.
http://forum.xda-developers.com/showthread.php?p=45293512
Next time use Autorec to install twrp. And make sure to install autorec thats specific to your model. Else u will soft brick your phone.
Te$la said:
You can try this to go back to stock.
http://forum.xda-developers.com/showthread.php?p=45293512
Next time use Autorec to install twrp. And make sure to install autorec thats specific to your model. Else u will soft brick your phone.
Click to expand...
Click to collapse
I did use autorec :/ for d803
Tried rooting installing custom firmware again and same thing again, system ui crash and on boot...
I think it is actually from editing build.prop.
I am having the wifi problem that after i reboot my phone it forgets the wifi instead of automatically connecting it and I found a post that says to do this:
"Try opening up your build.prop file and editing the following: wifi.lge.patch. Set it to false. This worked on my Bell D803.
Needless to say, you need to be rooted to do this."
http://forum.xda-developers.com/showthread.php?t=2480305&page=2
Is there any other fix for the wifi issue?
Without fail every time after the lg logo disappears after flashing a custom rom made for the h918 lg v20 I get a flashing black screen. I'm doing a factory reset/wiping davlik cache/ cache/ and data 3 times each time I flash the custom rom and sometimes I even go as far as wiping the internal memory completely even after a factory reset but no matter what I try without fail I always get the flashing black screen right after the lg logo disappears. I even tried upgrading twrp from 3.0.2.0 to 3.1.1.0 and I even tried flashing the no-verity-opt-encryption 5.1 and 6.0 but nothing I've tried seems to fix it so I'm asking for help now since I've exhausted my knowledge on what could fix it. What can I do to fix that issue so I can finally start using custom roms again? Any help would be most appreciated thanks in advance.
P.S. The only rom I could get to flash successfully was the stock twrp flashable t-mobile rom on one of the threads in the rom section of the lg v20 forum so for now until I can fix that issue I'm currently running that so I have a phone I can still use.
raze5115 said:
Without fail every time after the lg logo disappears after flashing a custom rom made for the h918 lg v20 I get a flashing black screen. I'm doing a factory reset/wiping davlik cache/ cache/ and data 3 times each time I flash the custom rom and sometimes I even go as far as wiping the internal memory completely even after a factory reset but no matter what I try without fail I always get the flashing black screen right after the lg logo disappears. I even tried upgrading twrp from 3.0.2.0 to 3.1.1.0 and I even tried flashing the no-verity-opt-encryption 5.1 and 6.0 but nothing I've tried seems to fix it so I'm asking for help now since I've exhausted my knowledge on what could fix it. What can I do to fix that issue so I can finally start using custom roms again? Any help would be most appreciated thanks in advance.
P.S. The only rom I could get to flash successfully was the stock twrp flashable t-mobile rom on one of the threads in the rom section of the lg v20 forum so for now until I can fix that issue I'm currently running that so I have a phone I can still use.
Click to expand...
Click to collapse
did you ever find a solution? I'm having the exact same issue and am pulling my hair out trying to get something to work
If the version number of twrp your using is in fact 3.1.xx then that could be your problem all the new roms im almost positive need the newest twrp from pheonix i think it 3.2.3.4 its in the deveopment section...ive heard alot of problems on this device with older interations of twrp. I would start there
https://forum.xda-developers.com/showpost.php?p=77177529&postcount=6
Phoenix591 said:
Official lineage 14.1 only works with pre10p h918, some firmware blobs need changed.
I just built an unofficial for my own use a few days ago that should work, but I havnt gotten around to testing it yet.
lineage-14.1-20180721-UNOFFICIAL-h918.zip
lineage-14.1-20180721-UNOFFICIAL-h918.zip.md5
When lineage 15.1 becomes official the h918 builds will be aimed at post10p. x86cpu is currently doing unofficial builds for both.
Click to expand...
Click to collapse
Hi, I've got the G6 a few days. I come from a perfect G5 with no problems.
I installed the Fulmics ROM, But when I reboot the phone, it repeats for so many times the LG logo and then it starts Android after 10/15 minutes.
I found that if I put Magisk in core mode this does not happen
If I uninstall all Magisk modules the problem remain.
Can someone help me?
matteool said:
Hi, I've got the G6 a few days. I come from a perfect G5 with no problems.
I installed the Fulmics ROM, But when I reboot the phone, it repeats for so many times the LG logo and then it starts Android after 10/15 minutes.
I found that if I put Magisk in core mode this does not happen
If I uninstall all Magisk modules the problem remain.
Can someone help me?
Click to expand...
Click to collapse
Wouldn't recommend fulmics, I would go with a stock ROM + magisk/xposed, but if you want to keep fulmics I would try flashing a new kernel and reinstalling magisk
Mnky313 said:
Wouldn't recommend fulmics, I would go with a stock ROM + magisk/xposed, but if you want to keep fulmics I would try flashing a new kernel and reinstalling magisk
Click to expand...
Click to collapse
Yes, now IM trying the 20c with magisk and xposed.
I think its better
Thanks
matteool said:
Hi, I've got the G6 a few days. I come from a perfect G5 with no problems.
I installed the Fulmics ROM, But when I reboot the phone, it repeats for so many times the LG logo and then it starts Android after 10/15 minutes.
I found that if I put Magisk in core mode this does not happen
If I uninstall all Magisk modules the problem remain.
Can someone help me?
Click to expand...
Click to collapse
Just had the same problem after installing Xposed. Bootloop + Stuck on the boot animation for 10/15 min and finally booting...
Afraid to reboot now !
Hi all.. I have an old Yureka phone which has gone into bootloop while installing some ROM a few months back. Since then I'm using another phone but i would love to have this phone running as a backup.
Last thing i remember was installing Nitrogen OS 8.1, which worked fine for sometime, then i tried to install a pie ROM which possibly caused the bootloop. I can still get into my recovery but thats about it. It allows me to install new ROMS but when i reboot, Yu logo appears and then the system reboots with a vibration.
Can someone suggest the best way to get my yureka running? Any help is greatly appreciated.
Thanks.