Related
I flashed my MZ600, with HTJ85B(USA_Wifi_3.2) using images/steps from post bellow and tablet works fine!
http://forum.xda-developers.com/showthread.php?t=1080963
Obviously there is no sign of "3G CDMA network" but for me, that was useless already, since I am in europe (UMTS).
I have asked this question many times, without a proper answer: why can't we switch basebands ?(since there is no proof of different hardware between US and EU xooms)?
why are there not any radio.img from US/EU versions so we can play/hack ?
Other moto tablets/phones even have apps for changing basebands from android!
If someone "experienced" creates a baseband backup, I am brave enough to do attempt the flash
Furthermore, I have some app-development experience, hence if needed I could develop an app for easy baseband switch.
Manolis
Hi,
I have a G900F I got in the UK and I've just moved to Canada with. Problem is it doesn't support some of the bands here so I find I often have a poor signal. I'm happy with the stock ROM but I believe if I am to open it up for all bands I need a custom ROM.
I don't need anything too flashy, but I'd like everything to work and be responsive.
In terms of the most complete ROMs it seems LineageOS Official and Resurrection Remixed are the most popular. Can anyone comment? How about Android 6 vs 7?
Thanks
Used to use resurrection but now that I've moved to lineage os I can say that its better and getting improved every update it gets
Beaksterboy said:
Hi,
I have a G900F I got in the UK and I've just moved to Canada with. Problem is it doesn't support some of the bands here so I find I often have a poor signal. I'm happy with the stock ROM but I believe if I am to open it up for all bands I need a custom ROM.
I don't need anything too flashy, but I'd like everything to work and be responsive.
In terms of the most complete ROMs it seems LineageOS Official and Resurrection Remixed are the most popular. Can anyone comment? How about Android 6 vs 7?
Thanks
Click to expand...
Click to collapse
g900f is almost identical if not the exact same as the canadian s5 g900w8.
you would need to use correct freq for your carrier, search will provide a howto. worse case scenario is to flash a canadian 6.0.1 modem from any canadian 6.0.1 stock fw
if trying to figure out connectivity, stay w/stock first as modems are from stock fw.
imo try superlite 6.0.1, it stock based and only takes a few minutes to install that way you can test out your carrier connectivity issues
https://forum.xda-developers.com/ga...-superlite-mini-mm-v1-0-361mb-g900w8-t3497158
So I can keep my stock firmware and just replace the G900F baseband (G900FXXS1CQAV) with the Bell Canada SM-G900W8 Modem and everything will be the same except the phone will work on the Bell Canada frequencies?
I had been planning to follow this guide: https://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059 to enable the 1700MHz band which is disabled on the G900F, but if flashing a Canadian modem will enable this band that sounds easiest.
Do I need to download the full 1.5GB firmware and extract the modem from it?
Thanks
Beaksterboy said:
So I can keep my stock firmware and just replace the G900F baseband (G900FXXS1CQAV) with the Bell Canada SM-G900W8 Modem and everything will be the same except the phone will work on the Bell Canada frequencies?
I had been planning to follow this guide: https://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059 to enable the 1700MHz band which is disabled on the G900F, but if flashing a Canadian modem will enable this band that sounds easiest.
Do I need to download the full 1.5GB firmware and extract the modem from it?
Thanks
Click to expand...
Click to collapse
ive never tried flashing a mdm from another model as ive never needed to for the s5.
ive not read enough to know if its possible or if it has any neg consequences.
easiest would be to change freq w/current mdm, search for samsung secret service codes to view and maybe change current freq
good place to start is here https://forum.xda-developers.com/showthread.php?t=2729694
I've done a lot of research on this forum. Most people say that installing G900W8 firmware on G900F isn't possible. Also it seems that it is the NVRAM which stores what bands are allowed on what model, so simply flashing a different modem won't make a difference.
Some people are saying that the hardware is different and this is what limits the bands, but I don't believe so, the radio/modem chip is the same version between models.
Trying to follow the link I posted earlier to change the NVRAM values after installing a custom ROM appears to be the only way. Some people say it works, and others say it only appears to work. The original thread was closed years ago so I guess I'll just need to try it and see.
Alternatively I could buy 2 phones, one W8 to use in Canada and a F to use in Europe, this seems silly though.
Hi!
I am sorry if this has been asked here before. I'm fairly new to this kind of stuff.
So I'm a foreigner living in Japan. Due to the allure of local warranty, I decided to get the Axon 7 (A2017G JPV).
It has been months since the last Nougat update came to other A2017Gs but hasn't arrived on the A2017G JPV. So I thought, may be ZTE Japan was just taking a longer time, etc. So recently, I decided to contact customer support. And their answer was unclear at best. They were apparently still deciding if they would release a Nougat update for Axon 7.
So here's my question. Considering that my Axon 7 is also A2017G, is there a way for me to install the latest A2017G European ROM or any other A2017G Stock ROMs for that matter, without unlocking my bootloader and rooting? And get OTA updates from A2017G European? If so, can someone please kindly point me in the right direction, I'm getting a bit lost.
If that isn't possible, is there a way, to install the stock A2017G ROMs (aside from JPV) and then relock the bootloader afterwards?
Please help me. Thank you.
jjquinto said:
Hi!
I am sorry if this has been asked here before. I'm fairly new to this kind of stuff.
So I'm a foreigner living in Japan. Due to the allure of local warranty, I decided to get the Axon 7 (A2017G JPV).
It has been months since the last Nougat update came to other A2017Gs but hasn't arrived on the A2017G JPV. So I thought, may be ZTE Japan was just taking a longer time, etc. So recently, I decided to contact customer support. And their answer was unclear at best. They were apparently still deciding if they would release a Nougat update for Axon 7.
So here's my question. Considering that my Axon 7 is also A2017G, is there a way for me to install the latest A2017G European ROM or any other A2017G Stock ROMs for that matter, without unlocking my bootloader and rooting? And get OTA updates from A2017G European? If so, can someone please kindly point me in the right direction, I'm getting a bit lost.
If that isn't possible, is there a way, to install the stock A2017G ROMs (aside from JPV) and then relock the bootloader afterwards?
Please help me. Thank you.
Click to expand...
Click to collapse
https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547
Absolutely no need to root.
Enjoy.
Hamburgle4 said:
https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547
Absolutely no need to root.
Enjoy.
Click to expand...
Click to collapse
Hi
Thank you for replying so quickly.
Please bear with me as I am still a bit confused.
The link you gave mo contains Factory Images for the A2017G, right? Therefore, I should just put the factory images (zip file), into the root directory of my SD Card, and update via settings (no need to unlock bootloader or root, right?)?
My A2017G (JPV) is now on A2017G JPV1.0.0B03.
Which factory image should I use?
Thank you very much.
*Deleted for apparent "madness"
Are you mad?!!! This won't work as the signature's don't match.
At best you end up with a failed update, at worst a brick...
ultramag69 said:
Are you mad?!!! This won't work as the signature's don't match.
At best you end up with a failed update, at worst a brick...
Click to expand...
Click to collapse
Now I'm scared. Haha
Do you have any advice on how I should proceed with this? Thank you very much.
Hamburgle4 said:
*Deleted for safety reasons.
Click to expand...
Click to collapse
Considering @ultramag69 said, do you think I should still proceed with this?
I don't think you have to the same radio firmware with all the G version out there.... If you dare to try it probably you will end up bricking your phone.... So don try. Unless you are sure can warranty claim it if it is briked
Unfortunately this region locking thing came in, sometimes it's different hardware for different regions but mostly it's to stop the grey import trade...
Due to this it is a requirement to unlock your bootloader if you want to flash other region/carrier roms, which again is a trial in itself...
If you do wish to try it, make sure you have a flashable version of your FULL stock rom, not an OTA - the difference is an OTA is a patch, usually of a few hundred Mb or so to update parts of your ROM, the full ROM is a stand-alone installation that will completely replace the current ROM.
Generally this will get you out of hot water but be aware this is also not 100% guarantee...
It will probably also delete all your data, back up first....
ultramag69 said:
Unfortunately this region locking thing came in, sometimes it's different hardware for different regions but mostly it's to stop the grey import trade...
Due to this it is a requirement to unlock your bootloader if you want to flash other region/carrier roms, which again is a trial in itself...
Click to expand...
Click to collapse
What I'm confused about is he's not asking to flash A2017A/U firmware (where region locking comes into play) on his device, only another country's A2017G fw so why would he need to unlock bootloader? It's still fw for the global model if I understand correctly.
Hamburgle4 said:
What I'm confused about is he's not asking to flash A2017A/U firmware (where region locking comes into play) on his device, only another country's A2017G fw so why would he need to unlock bootloader? It's still fw for the global model if I understand correctly.
Click to expand...
Click to collapse
I'm on your side - the modem file might be different, but since the hardware is the same, it should work. Maybe the modem file has improved signal stuff for Japan, but it's extremely improbable considering ZTE's craptastic devs...
Also, what could be the worst thing that could happen? Here are the possibilities:
- Works: enjoy
- Installation failed: Should fail before even changing files anyways
- Soft brick: get to recovery, download full update zip, install, wait for Nougat
- Hard brick: "I woke up this morning and it was off, doesn't boot anymore, I want a replacement"
And if the modem is too crappy you can always go back to Japan's firmware
I believe that the Japanese version is different from the other G versions, at least on the modem level. Japan uses some bands that are not used by any other country in the world, so unless ZTE Japan decided to release the G model knowing that it would have some connectivity issues on all Japanese carriers, the Japanese G model must have at least a different modem.
Bold = band is present in the global G model
KDDI: CDMA BC0 / BC6, LTE 1/11/18/41
NTT Docomo: UMTS 1/9/19, LTE 1/9/19/21/28
Softbank: UMTS 1/8/11, LTE 1/8/9/41
I kinda get what you're getting at after looking further into the models. Basing off the spec sheets, Amazon JP has the exact same A2017G TD-LTE with matching bands sold by ZTE. Whereas on the ZTE JP page, it instead matches the bands of something named Axon 7 TD-LTE JP (couldn't find model number, but sounds like OP's A2017G). This has over half the exact bands available on A2017G, additional UMTS bands 6 & 19 and one CA band.
I think someone in another thread previously mentioned about potential signal issues with the Axon 7 being sold in Spain after flashing DE fw. Looking at their spec sheet, it appears to have a few bands missing, may have additional bands, but it's hard to tell since only the frequencies are stated. Could just be anecdotal as you'd think with the greater range of frequencies, it shouldn't face those issues. Anyways this is a separate matter, and potentially an apples to oranges comparison.
Thank you all for your advice and insights.
I figured, damn all worries, and just used the recovery mode to flash the update.zip.
Lo and behold, it was updated with seemingly no issue. Even tried if my mobile data would work properly. And it did.
Thanks everyone!
jjquinto said:
Thank you all for your advice and insights.
I figured, damn all worries, and just used the recovery mode to flash the update.zip.
Lo and behold, it was updated with seemingly no issue. Even tried if my mobile data would work properly. And it did.
Thanks everyone!
Click to expand...
Click to collapse
Great to hear. Also vindicates my apparent "madness" lol.
Hamburgle4 said:
Great to hear. Also vindicates my apparent "madness" lol.
Click to expand...
Click to collapse
Yeah it was nonsense, they are both a2017Gs anyways
We're all a bit mad though, flashing stuff on a 400 dolar thingy...
ive got the A2017 Chinese, bought from aliexpress. Ive rooted and installed the twrp flashable B15 from @djkuz, but the nougat firmware is awful for my DoCoMo phone reception (in far regional Nagasaki). So i need a method to either flash the modem for A2017G (not sure which B# release), or wait for the next chinese firmware release and hope for the best. Any suggestions or experiences to improve my reception? Is it the modem?
Thanks for all the contributions to this thread, as it has got me in the right direction.
jjquinto said:
Thank you all for your advice and insights.
I figured, damn all worries, and just used the recovery mode to flash the update.zip.
Lo and behold, it was updated with seemingly no issue. Even tried if my mobile data would work properly. And it did.
Thanks everyone!
Click to expand...
Click to collapse
Hey I know this is an old thread but I thought I would poke in and add my feedback. I also live in Japan and have the A2017G. I bought it because it was the only phone on the market at the time that [supposedly] supported Google Daydream. Later I realized that only the US version actually worked with Daydream. Later on support was added to European ROMS (when upgraded to 7.1.1). But for some reason the Japanese ROM, despite being 7.1.1 would say 'Incompatible Phone', even when installed manually. I contacted ZTE's customer service, which was terrible; all they said was "we don't know when it will be supported". This was about a year ago, so this week I just got sick of waiting, found the German firmware (A2017G-N-B10), installed it and everything works fine. The radios have no issues, and I was able to download Daydream right from the marketplace.
Thanks for everyone who contributed to this thread!
I have the SM-J320A, AT&T version, and now being used outside the USA. Specs on GSMArena indicate that this phone is one of the versions of the J3 2016 family: J320FN (Europe); J320F (EMEA); J320F/DD (India); J320A (AT&T); J320P (Sprint, Virgin Mobile, Boost); Galaxy Amp Prime (Cricket); Galaxy J3 V (Verizon); J320M (LATAM); J320G (Asia).
1. So does this mean all these versions are identical in Hardware?
If there is no other option, I will install the AT&T newest version, however I would prefer to see if it's possible to use a non-AT&T FW so I can get monthly updates. So...
2. Can anyone tell me if it's possible to put a NON-AT&T 'open' version stock FW on the SM-J320A... and I would then be able to receive the security updates direct from Samsung...
Hope what I am asking is clear.
Robert
The j320 model has three different soc. The j320a is exynos based. The different exynos models are J320a, j320ag, j320az & j320w8.
But with this device only the carriers supply updates, unfortunately.
Not sure if it's an option, but I activated an att sim for their prepaid service (25¢ per minute or something)... Will never use the $10 I spent for the service, but I can update ota now.
Other than that keep your eyes here, we try to keep the latest firmwares available for download.
DamienMc said:
The j320 model has three different soc. The j320a is exynos based. The different exynos models are J320a, j320ag, j320az & j320w8.
But with this device only the carriers supply updates, unfortunately.
Not sure if it's an option, but I activated an att sim for their prepaid service (25¢ per minute or something)... Will never use the $10 I spent for the service, but I can update ota now.
Other than that keep your eyes here, we try to keep the latest firmwares available for download.
Click to expand...
Click to collapse
That's the best answer I've had on a forum... That makes it clear. So since I cannot really do what I was asking, no problem, I am willing to install the AT&T 7.1.1 version J320AUCU2AQI5. Only issue now is that as said, the phone is in use outside the US currently so cannot get the OTA DL. Is there any way or source to DL the full stock firmware for flash via Odin? Would prefer fully stock version with no rooting, etc.... I have a Macbook Pro for the flashing if it makes any diff.
Robert
Maybe this is what I'm looking for...
https://mega.nz/#!Xl4CiZZA!wXRCOHvyyHkcjq0jke47aTVFAMc6s0vxGG6loM-8zUc
??
Yessir
That's the most current j320a firmware
DamienMc said:
Yessir
That's the most current j320a firmware
Click to expand...
Click to collapse
Ok thanks again...
Is that completely stock and flashes with Odin?
Any other special instructions needed to flash?
Just asking as it seems there is a lot of discussion on the entire thread and I'm not sure which issues are coming with which downloads.
Robert
Any issues where addressed.
Yes 100% stock.
Nothing special just load all four files in odin and flash it
Forgive me if I sound like a real dingba5, but I can't control myself from asking this. I have developed what can only be described as an unexplainable and illogical obsession with altering my Galaxy Express 2 SM-J327A 's factory condition. From what I know, there's no custom recovery, no ROM, no ROOT. NOTHING for this model. But the Sprint, Boost, etc. variants are all living it up in zip flashing heaven.
So using the same logic my man was using here, which was making sense, could I flash J327P firmware onto my device without ruining my day......
I just bought an unlocked AT&T phone. I don't care about security updates. I do like performance improvements and certain changes when moving to a new operating system though. However I am not willing to make those changes if I sacrifice stability.
Should I switch my AT&T rom to U.S unlocked? Is the gains worth it? Do I gain anything other then "Android 9 pie" in the settings? How is performance?
Will I get OTA updates after that or will I still need to use LGUP?
Thank you
Edit: I think I answered my own question. The ability to use HDMI out is not available until after the December 2018 update. My phone is stuck in November.
Also, unless you're an AT&T customer there's no reason to want or keep AT&T firmware.
Curious-Octopus said:
I just bought an unlocked AT&T phone. I don't care about security updates. I do like performance improvements and certain changes when moving to a new operating system though. However I am not willing to make those changes if I sacrifice stability.
Should I switch my AT&T rom to U.S unlocked? Is the gains worth it? Do I gain anything other then "Android 9 pie" in the settings? How is performance?
Will I get OTA updates after that or will I still need to use LGUP?
Thank you
Edit: I think I answered my own question. The ability to use HDMI out is not available until after the December 2018 update. My phone is stuck in November.
Click to expand...
Click to collapse
ChazzMatt said:
Also, unless you're an AT&T customer there's no reason to want or keep AT&T firmware.
Click to expand...
Click to collapse
Would only flashing and no root/bootloader unlock allow me to keep the serial and imei in the phone? Or should I make alot of backups of files?
Curious-Octopus said:
Would only flashing and no root/bootloader unlock allow me to keep the serial and imei in the phone? Or should I make alot of backups of files?
Click to expand...
Click to collapse
Let's take one topic at a time.
Using Dev Patched LGUP to flash to NAO firmware for your carrier unlocked phone only gets rid of the AT&T bloat and allows you to update firmware while keeping AT&T firmware does not.
Nothing about that conversion touches serial or IMEI.
_____
Unlocking the Bootloader and rooting is a more advanced process which is harder. But that also normally shouldn't affect serial or IMEI. If you do lose serial or IMEI there's a method posted to write them back, I believe.
ChazzMatt said:
Let's take one topic at a time.
Using Dev Patched LGUP to flash to NAO firmware for your carrier unlocked phone only gets rid of the AT&T bloat and allows you to update firmware while keeping AT&T firmware does not.
Nothing about that conversion touches serial or IMEI.
_____
Unlocking the Bootloader and rooting is a more advanced process which is harder. But that also normally shouldn't affect serial or IMEI. If you do lose serial or IMEI there's a method posted to write them back, I believe.
Click to expand...
Click to collapse
Thank you!
I am new to all of this, but I have experience in computer so I am confident about my ability to do it.
With the talk of Android 10 available via OTA update on AT&T only, it might make sense for ppl who want Android 10 to stick with AT&T firmware because if you cross-flash there is no going back. Android 10 for other carriers is not out yet so if you cross-flash, you're stuck with Pie.
Sorry, nevermind, seems its coming out for all soon.
Android# said:
With the talk of Android 10 available via OTA update on AT&T only, it might make sense for ppl who want Android 10 to stick with AT&T firmware because if you cross-flash there is no going back. Android 10 for other carriers is not out yet so if you cross-flash, you're stuck with Pie.
Sorry, nevermind, seems its coming out for all soon.
Click to expand...
Click to collapse
For V35 on AT&T firmware, you won't get the OTA AT&T update unless you're an AT&T customer. Or AT&T MVNO Red Pocket customer.
Whereas you can flash to NAO Android 10 firmware when that is released via KDZ.
People, don't get hysterical like you did with the Pie update. All variants will get Android 10. All but AT&T will have full image KDZ which you can download and install.
NAO KDZ will be the best choice for those who are not Google Fi customer or AT&T customer.
Don't go trying to flash Korean carrier firmware like some did for Pie. Just be patient.
Stupid question... i bought one chep last year of course AT&T and i paid the unlock code, of course it came with Oreo and as later i found it couldn't get Pie. So i flashed it to the unlocked version, but as someone in other thread it seems that the firmware "official" has just been on Oreo, mine seems has security update of June and it has been updated this month with another security update...
Mine seems to work normally, however i could say it has three main flaws, first and most annoying for me is that do not disturb doesn't work properly even with rules established, only way to get it working is setting the alarm, which is a bit annoying considering that as for this virus situation i am not working since 2 months ago, and of course i don't want to get disturbed after 10:00 pm and also very early in the morning...
And second one is the signal which is worst than my previous V30+ converted to US998, funny because with other of my old phones as Z2 Force, Iphone 7 and of course US998 i could get easily 30MB+ at average using same SIM card and in the same area for more than two years, but since i have this V35 i can barely get 2MB at average and max 38MB, and max with the other ones mentioned i could get 45MB and in one time i got 60MB
And i don't know if mine has a weird battery but it can barely get around 15-16 hours of normal use.
Should i flash again to AT&T, flash the latest Pie with security update or just wait for the KDZ of Android 10?
And is that true that it now can be rooted?
This thread is widening in scope to the pros and cons of the various vendor roms and android levels. There are a couple of points to add toward that end. To my knowledge, all v35's on any existing rom can be rooted including the AT&T model. The difficulty with AT&T phones is that kdz's aren't released. You need to make your own backup before flashing to another rom if you want to return to AT&T firmware from say GFI/NA.
The next is about Oreo, at least the "h" NA/GFI build. Hotspot and tethering is broken. It may work once or twice after first setup, but it will stop working. That is a deal breaker for some. Everything (that matters to me) seems to work on Pie.
It will be interesting to hear reports on Android 10 on v35. Before taking the leap, it is important to know that ARB remains 0. An ARB change could lock you to Android 10. I don't recall reading about ARB changes on flagship LG phones in the past several years. Regardless, ARB or back-flashing is not yet reported and I do not know if qfil can overcome an ARB change. My suggestion is to be patient and watch for A10 v35 updates from the skilled, brave and sometimes foolhardy here on xda or tg.
tonochito said:
Stupid question... i bought one chep last year of course AT&T and i paid the unlock code, of course it came with Oreo and as later i found it couldn't get Pie. So i flashed it to the unlocked version, but as someone in other thread it seems that the firmware "official" has just been on Oreo, mine seems has security update of June and it has been updated this month with another security update...
Mine seems to work normally, however i could say it has three main flaws, first and most annoying for me is that do not disturb doesn't work properly even with rules established, only way to get it working is setting the alarm, which is a bit annoying considering that as for this virus situation i am not working since 2 months ago, and of course i don't want to get disturbed after 10:00 pm and also very early in the morning...
And second one is the signal which is worst than my previous V30+ converted to US998, funny because with other of my old phones as Z2 Force, Iphone 7 and of course US998 i could get easily 30MB+ at average using same SIM card and in the same area for more than two years, but since i have this V35 i can barely get 2MB at average and max 38MB, and max with the other ones mentioned i could get 45MB and in one time i got 60MB
And i don't know if mine has a weird battery but it can barely get around 15-16 hours of normal use.
Should i flash again to AT&T, flash the latest Pie with security update or just wait for the KDZ of Android 10?
And is that true that it now can be rooted?
Click to expand...
Click to collapse
cmrntnnr said:
This thread is widening in scope to the pros and cons of the various vendor roms and android levels. There are a couple of points to add toward that end. To my knowledge, all v35's on any existing rom can be rooted including the AT&T model. The difficulty with AT&T phones is that kdz's aren't released. You need to make your own backup before flashing to another rom if you want to return to AT&T firmware from say GFI/NA.
The next is about Oreo, at least the "h" NA/GFI build. Hotspot and tethering is broken. It may work once or twice after first setup, but it will stop working. That is a deal breaker for some. Everything (that matters to me) seems to work on Pie.
It will be interesting to hear reports on Android 10 on v35. Before taking the leap, it is important to know that ARB remains 0. An ARB change could lock you to Android 10. I don't recall reading about ARB changes on flagship LG phones in the past several years. Regardless, ARB or back-flashing is not yet reported and I do not know if qfil can overcome an ARB change. My suggestion is to be patient and watch for A10 v35 updates from the skilled, brave and sometimes foolhardy here on xda or tg.
Click to expand...
Click to collapse
Well my teher works, the phone itself has been good for the amount i paid $100, however those bugs or may be wrong flash? affects me a bit... i guess i should be patient and wait for the kdz.
Can anybody confirm this?
https://piunikaweb.com/2020/06/09/lg-v35-thinq-android-10-lg-ux-9-0-update-rolling-out/
Says that LG G7 Android 10 can be flashed to the V35...
tonochito said:
Can anybody confirm this?
https://piunikaweb.com/2020/06/09/lg-v35-thinq-android-10-lg-ux-9-0-update-rolling-out/
Says that LG G7 Android 10 can be flashed to the V35...
Click to expand...
Click to collapse
NO, that article doesn't say that. It doesn't mention LG G7 whatsoever at all. Seriously. You are just making stuff up?
Confirm what? That you can cross flash to Korean carrier V35 firmware to other V35 against our advice? Why would you want to do that? Just be patient!
Here's my reply from earlier in the thread. Please read it this time.
ChazzMatt said:
For V35 on AT&T firmware, you won't get the OTA AT&T update unless you're an AT&T customer. Or AT&T MVNO Red Pocket customer.
Whereas you can flash to NAO Android 10 firmware when that is released via KDZ.
People, don't get hysterical like you did with the Pie update. All variants will get Android 10. All but AT&T will have full image KDZ which you can download and install.
NAO KDZ will be the best choice for those who are not Google Fi customer or AT&T customer.
Don't go trying to flash Korean carrier firmware like some did for Pie. Just be patient.
Click to expand...
Click to collapse
ChazzMatt said:
NO, that article doesn't say that. It doesn't mention LG G7 whatsoever at all. Seriously. You are just making stuff up?
Confirm what? That you can cross flash to Korean carrier V35 firmware to other V35 against our advice? Why would you want to do that? Just be patient!
Here's my reply from earlier in the thread. Please read it this time.
Click to expand...
Click to collapse
i know but is kinda weird that even that article links to Reddit and some people on the video saying they flashed "successfully" their v35...
tonochito said:
i know but is kinda weird that even that article links to Reddit and some people on the video saying they flashed "successfully" their v35...
Click to expand...
Click to collapse
Yet again, we went all through this a year ago with Pie.
You can flash it "successfully" but you wipe all data, some of the menus are in Korean... Then a month or so later every other variant gets a KDZ (EXCEPT for AT&T). So then people have flash again to what they REALLY want -- which is a North American Open (NAO) carrier unlocked variant firmware. AND they lose data again and risk messing up their phone by cross flashing entirely different region yet again.
There's no need to do it. JUST WAIT. FLASH to NAO firmware when Android 10 is released for that variant.
If you're already on NAO firmware now, then when Android 10 is released for that variant, it would be simple "Upgrade" in Dev Patched LGUP (keep your data). If you're not yet, then it would be Partition DL or Refurbish mode to cross flash to NAO at that time. You would lose your data only once.
The people who are impatient are NOT going to stay on Korean carrier firmware long term. They will cross flash yet again to NAO when it comes out, because it's more desirable. They will be unhappy with the Korean carrier firmware. Many will mess up their phones. Don't be one those people!
Look it's your phone. Do what you want. But weeks ago I predicted this would happen and have cautioned people to not make the same mistakes again that were made last year during Pie rollout.
I just installed the korean ROM and it works... kinda good there are some minor bugs that may bother you if you pay too much attention or that are a bit annoying i am going to put here:
As soon you reboot your phone it is going to give you some warning about well some codes and stuff, i guess because the hardware is not the same?
Menu is in korean at set up but you can change it to your language
There are 3 apps that are in korean and you can't uninstall it, specially Q voice that is on korean language not working
LG Smart World does not work, but anyway i never used it, also Quick Help but it never worked on Pie too so its irrelevant
There is one app called DMB which does not work, don't know what it does but it just freeze when i try to open it
Some weird bug with the battery? It doesn't show up the estimated remaining battery, it just keep on calculating data
For some reason i haven't been able to find or change the data configuration, you know change LTE, 3G or 2G. Seems like it is on auto mode which is kinda annoying for me.
The only drawback i could say for me its dual apps... is not that easy as on Pie
And for some reason it fixed in my case the annoying but it had about do not disturb, which only worked when an alarm was set, but if there wasn't alarm it never worked
Seems the "AI" camera has been improved or fixed because when i selected AI cam it just never do anything relevant compared with my old V30+, now it recognize stuff such person and so on
Although i love stock music player i just hate the annoying purple tone with it, now it changes depending on the setup of the midnight menu. I think that on a rooted v30+ it could be changed but i am not interested on root it and doubt being on Android 10 could be rooted. But it has integraded FM app radio which i regulary use but being the american version of course it has been removed, so it has to be installed manually
What i like its that now it has integrated viedo screen recorder so good bye third party apps, which in my case i really don't like you know if you don't pay you have adds and stuff related.
But the drag menu is with a bug? i don't know how to explain it but it just goes with the hour and date long... instead of just taking a portion of the screen
I just did it and didn't wait because my v35 is broken so i need to change or leave it as secondary phone, around 20 days ago the fingerprint begun to be erratic and was hit or miss trying to unlock it, i have tried cleaning it but it worked as i mentioned on hit or miss. Right now seems i can't configure it. No idea why it just became erratic. And there was a little crack on top of the screen and it seems it got wet under the screen with a white spot, so i guess it is going to be progressively worst with time. Even i tried the old trick of putting on a zip bag but after i left it for the night, when i opened it in the morning it was just wet...
My only question could be if this can be flashed to the North America firmware...
tonochito said:
My only question could be if this can be flashed to the North America firmware...
Click to expand...
Click to collapse
People who flashed to Korean Pie last year were able to flash to North American Open (NAO) Pie when that was released a month or two later.
For most people, cross flashing from AT&T to NAO first and then waiting for Pie would (using Dev Patched LGUP Upgrade mode) have been the better decision. Instead of cross flashing twice -- to Korean, then again to NAO -- to different variant firmware. NAO was what they really wanted in the first place.
OR if already on NAO, just be patient. Android 10 is coming.
ChazzMatt said:
People who flashed to Korean Pie last year were able to flash to North American Open (NAO) Pie when that was released a month or two later.
For most people, cross flashing from AT&T to NAO first and then waiting for Pie would (using Dev Patched LGUP Upgrade mode) have been the better decision. Instead of cross flashing twice -- to Korean, then again to NAO -- to different variant firmware. NAO was what they really wanted in the first place.
OR if already on NAO, just be patient. Android 10 is coming.
Click to expand...
Click to collapse
Well it seems that when NAO kdz will be available i will have the G8, as for me the fingerprint stuff drives me nuts right now that is not working lol, it has been a fantastic phone just well i guess it's time to move on. At least is good that can be flashed to NAO easily and with no problems like other brands out there.
Hello everyone,
I cross-flashed Android 10 on my v35 following this guide everything went as expected.
* I restored my backup from original Android 9 without any problems.
* Overall the phone feels faster, the camera experience is better(not sure that it has any benefits in the quality), unfortunately we cannot change lens during video
* The gCam 6.2 that I was using and was previously kinda stable now cannot save the picture, installed a 5.2 version that was stable in G6 -> v30 and v35 and I will be using this one until the problems with 6.x or 7.x are resolved.
* There are some korean apps that can be hidden but it they do not create any problems.
* Gestures are exactly what I needed and far better than FNG (apart from the customization options that are completely missing)
* Battery is also considerably better, but must be tested in time.
Hello to everyone!
Recently i bought an unlocked AT&T LG V35 which i am using it in Europe without any issue.
I want to cross-flash it in NA ULM kdz cause i don't want the AT&T firmware,but after a lot of reading here and there about the way i have to flash,i am a little bit confused,so i have some questions in order to go on.
My phone came with Pie version AWM20c and security patch level July 1,2019.
1)Which version of NA kdz should i download from LG firmwares site?
I see 4 versions..AIO,GFI,AMZ and USA..Maybe the latter is the most suitable?
2)Should i first crossflash it to Oreo NAO firmware and after update to Pie,(like used to do with LG V30 US998 that we must first install Nougat),or going straight away to NAO Pie?
3)The method of crossflashing is the same like LG V30 from other carriers to US998,as it is in Frankenstein thread?
4)Which of 2 methods between Refurbish and Partition DL is better for my case?
I want a completely clean kdz install,because a weird fact happens to my storage capacity in System,which has 16GB of storage used,and i suppose that all this used capacity,is because of AT&T bloated firmware,in addition to my 2 LG V30's,one is AT&T unlocked and the other is open EU 930,that both have about 10 GB used storage from system.
Thank you all in advance for your answers.
Succesfully crossflashed ULM firmware NAO USA 20f,android 9,security patch level February 1,2020.
Previous software version was android 9,AWM20c,security patch level July 1,2019.
I followed the same procedure of Frankenstein LG V30,V30+.
I used the Partition DL mode to flash and everything went fine..just in the end of the process and after the phone rebooted for first time,i got a notification referring the below:
"Decryption unsuccessful
The password you entered is correct,but unfortunately your data is corrupt.
To resume using your phone,you need to perform a factory reset.When you set up your phone after the reset,you"ll have an opportunity to restore any data that was backed up to your Google Account.
Reset phone"
I don't know if this notification is something bad,but all looked normal after the reset.
No issues till now,no AT&T bloatware,LG logo when powering on,instead of AT&T logo.
As others mentioned,the software version form,remains AWM,instead of ULM.
The previous version from AT&T was AWM20c,now it is AWM20f despite the fact that i have ULM firmware.
I hope my infos can help others in future.
Of course a big thank you goes to everyone here that contributes with their knowledge,making all these useful guides.