Database Users

check this 5.1 vanir ROM

http://www.drdevs.com/devs/cannondalev2000/vanir/falcon/

I was trying to look around for a 5.1 vanir just a bit earlier!
I see a folder for liquidsmooth too. Hopefully that means he's going to try and build 5.1 liquidsmooth!

hows it working?

Sajoeee said:
hows it working?
Click to expand...
Click to collapse
Booted and working on XT1031. Signal bar bug as usual.
Xposed 5.1 is working on it.

itslels said:
Booted and working on XT1031. Signal bar bug as usual.
Xposed 5.1 is working on it.
Click to expand...
Click to collapse
good dd? any fc? lots of features?

Sajoeee said:
good dd? any fc? lots of features?
Click to expand...
Click to collapse
Setting>Interface>Gestures - Force Closes
Just the basic feature, Buttons, Statusbar etc...
But still smooth!

I'll probably use it for a few days to see what modules get updated for Xposed. Mainly using it just to fart around with that. There are Commotio 5.1 builds as well, but I can't recall if it had any more features.

Can somebody report whether it is working on xt1033 or not ??

sachoosaini said:
Can somebody report whether it is working on xt1033 or not ??
Click to expand...
Click to collapse
Both Sims working bro, using it with banks gapp and stock kernel

awsmanks said:
Both Sims working bro, using it with banks gapp and stock kernel
Click to expand...
Click to collapse
Well that's like a good news....I can't wait to try this..now can you also guide me there are two Download files there in download section .. Which one to download. ????

sachoosaini said:
Well that's like a good news....I can't wait to try this..now can you also guide me there are two Download files there in download section .. Which one to download. ????
Click to expand...
Click to collapse
Bottom file. Non OTA
---------- Post added at 10:27 PM ---------- Previous post was at 10:10 PM ----------
Sorry for double post, but the same builder now has an Insanity 5.1 rom for falcon. Anyone heard of this rom before?

Nope

Insanity 5.1 works on dual sim
Insanity 5.1 works smoothly on xt1033, just now i installed it, there is no bug even ussd code works fine . on resurrection remix ussd code gives soft reboots but insanity works super smooth
link is: http://www.drdevs.com/devs/cannondalev2000/InSaNiTy/falcon/
---------- Post added at 11:31 AM ---------- Previous post was at 11:29 AM ----------
itslels said:
Bottom file. Non OTA
---------- Post added at 10:27 PM ---------- Previous post was at 10:10 PM ----------
Sorry for double post, but the same builder now has an Insanity 5.1 rom for falcon. Anyone heard of this rom before?
Click to expand...
Click to collapse
hmm not bro but its working smooth on xt1033 dual sim variant
i think insanity rom is also type of vanir rom because the boot animation is vanir roms one

So my fav ROM is working with latest build .... experience is working too with latest nightly

Does this one official???, its way too big sizes for vanir???

SH1M4BD3 said:
Does this one official???, its way too big sizes for vanir???
Click to expand...
Click to collapse
Sometimes it depends On the code and apps used by the dev. But still you are right about this thing. But when downloaded its small in size.

Anyway..whose madevthis awesome stuff did he already posted somewhere??

are these features in the rom ?
http://www.vanir.co/word/features/

Deleted

Looks like there was an upload today for the Vanir! Can't wait to try it although would have loved to try the Insanity ROM too.

Shareit not working

Can anyone managed to Recieve files from shareit On TN7

Bro are you using cyanogenmod or the stock one??
---------- Post added at 08:13 AM ---------- Previous post was at 08:08 AM ----------
Vanshul14 said:
Can anyone managed to Recieve files from shareit On TN7
Click to expand...
Click to collapse
Bro which is are you using stock one or cyanogenmod?..
If cyanogenmod I'm telling you it's full of bugs and this is a part of those bugs it might be caused by the poor app optimization for this rom and this rom is not a daily driver had used that version on my tab and I was pretty disappointed except for the amazing battery life it provided. Me.

MIUI 10 for Mi Max (Prime) - 8.7.2 Alpha

8.7.2: http://goo.gl/aQ9dXw
Prime 8.7.2: http://goo.gl/5UqexF
Source: http://t.me/xiaomiui
Only English and Chinese
Bug:
- Unknown
Android Version:
8.0

thank you and for info first link is for mi max 32 guys!

Really? Android version is 8.0? Then, I hope our devs can get blobs for oreo

its very slow link!!

khnoizer said:
Really? Android version is 8.0? Then, I hope our devs can get blobs for oreo
Click to expand...
Click to collapse
its is not oreo, it is still based on N.

deepankarverma said:
its is not oreo, it is still based on N.
Click to expand...
Click to collapse
Then, why'd you write that android version is 8.0?

deepankarverma said:
its is not oreo, it is still based on N.
Click to expand...
Click to collapse
you try it? bugs?

khnoizer said:
Then, why'd you write that android version is 8.0?
Click to expand...
Click to collapse
i think you are not familiar with mi numbering of rom files. please get familiar with that
iaio72 said:
you try it? bugs?
Click to expand...
Click to collapse
i am using it, its boot up fine and so far everything is working

deepankarverma said:
i think you are not familiar with mi numbering of rom files. please get familiar with that
i am using it, its boot up fine and so far everything is working
Click to expand...
Click to collapse
Haha

Has someone with 3/32 tested it already ? Any bugs ? Working ? Shall we install this via the Updater app ?

---------- Post added at 07:39 PM ---------- Previous post was at 07:38 PM ----------
Jenardthelmao said:
Has someone with 3/32 tested it already ? Any bugs ? Working ? Shall we install this via the Updater app ?
Click to expand...
Click to collapse
Installed via twrp on my helium
Work very well, but its based on nougat not Oreo,
For PlayStore use Google installer apk

Jenardthelmao said:
Has someone with 3/32 tested it already ? Any bugs ? Working ? Shall we install this via the Updater app ?
Click to expand...
Click to collapse
i am using it in my mi max 32 gb, no issue, use twrp to install!
---------- Post added at 05:45 PM ---------- Previous post was at 05:43 PM ----------
iaio72 said:
---------- Post added at 07:39 PM ---------- Previous post was at 07:38 PM ----------
Installed via twrp on my helium
Work very well, but its based on nougat not Oreo,
For PlayStore use Google installer apk
Click to expand...
Click to collapse
no need to use installer, just search mi app store "google" there you will find google installer without any sideloading and legit!

deepankarverma said:
i am using it in my mi max 32 gb, no issue, use twrp to install!
---------- Post added at 05:45 PM ---------- Previous post was at 05:43 PM ----------
no need to use installer, just search mi app store "google" there you will find google installer without any sideloading and legit!
Click to expand...
Click to collapse
Thanks for trying. Did you do clean flash ? Including wiping the system partition ? Sorry for so many questions, this is my first time flashing a MIUI rom via Twrp

Portrait mode 3/32
Does the Portrait mode for Camera works already ? I dont have it the old Camera from MIUI 9 is still the camera in this version but I suppose this should be different.

Jenardthelmao said:
Thanks for trying. Did you do clean flash ? Including wiping the system partition ? Sorry for so many questions, this is my first time flashing a MIUI rom via Twrp
Click to expand...
Click to collapse
yes i did clean install, i recommend clean install, after that magisk.
---------- Post added at 07:00 AM ---------- Previous post was at 06:59 AM ----------
Jenardthelmao said:
Does the Portrait mode for Camera works already ? I dont have it the old Camera from MIUI 9 is still the camera in this version but I suppose this should be different.
Click to expand...
Click to collapse
use magisk camera2api module and use modded gcam.

which gcam ver working with both front n rear potrait mode .

OTA
I see that AI camera is still not supported in this version. Anyways can we recieve OTA updates via the Updater app when new version arrives ?

Installed via twrp.
First boot settings in chinese, I dont even remember, how I managed to switch to English.
Nice new animations, lots of Mi stuff - all in chinese.
New options like AI and Car mode also in chinese.
Lost twrp and root, had to flash twrp via fastboot again, then Magisk.
Android Nougat 7.0
No Google stuff, have to install google from mi store and so on.
Camera doesnt have portrait mode
Tried to uninstall chinese cr.., restarted and ended in bootloop.
If you have lot of time and good nerves, go for it.

Jenardthelmao said:
I see that AI camera is still not supported in this version. Anyways can we recieve OTA updates via the Updater app when new version arrives ?
Click to expand...
Click to collapse
i dont think that is possible, the updater checks for update according to your mi account, if you had not applied for alpha rom tester you cant receive ota even on alpha rom

How do you install this?
I wiped: System, Data, Cache and Dalvik
Flashed
Now at boot I only see MI logo, and it's not loading android.
Downloaded 6.5.2 version for my prime.

LineageOS 15.1 with microG[Kuntao]

LineageOS with microG is now available for our wonderful device. It's basically Official Lineage 15.1 with signature spoofing and build in microG(open source, battery friendly alternative for Google Framework).
More details at: https://lineage.microg.org
Download: https://download.lineage.microg.org/kuntao/

How can i install?

Is this also treble enabled?

MrJackTR said:
How can i install?
Click to expand...
Click to collapse
Install using TWRP but do not install GApps.
Optional: Install Magisk for root
Sohit5s said:
Is this also treble enabled?
Click to expand...
Click to collapse
No it is not a Treble ROM.

Great man can I use this microg same as other.it will not cause any problem na I am asking bcoz I have very less idea about this but want to try and one more thing is volte and other features are also included
---------- Post added at 08:31 AM ---------- Previous post was at 08:25 AM ----------
Where is the link to download when I click on the link given on this post it's showing the file size around some 15 kb.

Rumor$ said:
Great man can I use this microg same as other.it will not cause any problem na I am asking bcoz I have very less idea about this but want to try and one more thing is volte and other features are also included
---------- Post added at 08:31 AM ---------- Previous post was at 08:25 AM ----------
Where is the link to download when I click on the link given on this post it's showing the file size around some 15 kb.
Click to expand...
Click to collapse
It is forked from official LineageOS 15.1 , so everything should work as it's working in official version.
Download zip file 15kb file is for md5 verification.

How to make VoLTE work? i guess this rom doesn't support it so what zip file i have to flash?
---------- Post added at 10:23 AM ---------- Previous post was at 10:05 AM ----------
Also how to install magisk in this rom? Tried stable and beta (16.7) but all ends upwith
updater process ended with error 1.
---------- Post added at 10:28 AM ---------- Previous post was at 10:23 AM ----------
UPDATE : Turns out VoLTE is present and working fine in this ROM its just that there's no HD or VOLTE in the notification or status bar.
Still need help with MAGISK though.

BUMP

is LuckyPatcher working fine in this ROM? how about emulating purchases without Play market? is Safety Net test passed ok and we can use NFC for payments?

Hello, How to move from treble rom to non treble?
Regards

Cuvillier said:
Hello, How to move from treble rom to non treble?
Regards
Click to expand...
Click to collapse
Wipe Cache/Dalvik, System and Data and flash the ROM you want.

I know the builds are automated, but I've been tryin builds occasionally, and the minimum CPU frequency is always stuck at 1689 mHz. Does anyone have a fix? I really want to get rid of Google without compromising too much but the ROM is unusable with all that battery drain.

Hi,
Is see that the 14.1 lineage is 6-7-2018.
I want to install this version.
Which twrp ?
And must Gapps be installed ?

Murtie said:
Hi,
Is see that the 14.1 lineage is 6-7-2018.
I want to install this version.
Which twrp ?
And must Gapps be installed ?
Click to expand...
Click to collapse
The whole point of these builds are that you can use them without gapps.

daymbeg said:
The whole point of these builds are that you can use them without gapps.
Click to expand...
Click to collapse
Okey,interesting,
And is the 14.1 better than stock rom with battery life?

Murtie said:
Okey,interesting,
And is the 14.1 better than stock rom with battery life?
Click to expand...
Click to collapse
Theoretically yes it should have better battery. Although the most important part is that it's free of all the tracking Google does.

daymbeg said:
Theoretically yes it should have better battery. Although the most important part is that it's free of all the tracking Google does.
Click to expand...
Click to collapse
Very good. Thanks for your quick answer.
Then i will try 14.1 microg 6-7-2018 soon.
Im now on Deodexed S251 from iniro.
Must i do full wipe? Data / cache / dalvik / system ?
And format data ?
Sorry that i cannot good speak ?

Murtie said:
Very good. Thanks for your quick answer.
Then i will try 14.1 microg 6-7-2018 soon.
Im now on Deodexed S251 from iniro.
Must i do full wipe? Data / cache / dalvik / system ?
And format data ?
Sorry that i cannot good speak ?
Click to expand...
Click to collapse
yes, full wipe (including internal storage) is needed to remove encryption.

TheKrates said:
yes, full wipe (including internal storage) is needed to remove encryption.
Click to expand...
Click to collapse
OKey bro i have succesfully flashed this rom.
But how can i use gapps ?
I like google play store. Is it possible to use this ?

Murtie said:
OKey bro i have succesfully flashed this rom.
But how can i use gapps ?
I like google play store. Is it possible to use this ?
Click to expand...
Click to collapse
MicroG is alternative to Google Services, for people who does not like GApps.
If you want GApps install LineageOS Official

[PORT][VINCE][PIE]Oxygen OS Port For Redmi 5 plus

Oneplus 5T Port (OB24-1-19-pie) By @jadeja shaktisinh
For Vince​
OxygenOS is a customized version of the Android mobile operating system developed by Chinese smartphone manufacturer OnePlus exclusively for their smartphones.
Click to expand...
Click to collapse
This rom is ported from the beta releases of Oneplus 5T by @jadeja shaktisinh
How To Install:-
Wipe Cache,Dalvik,Data,System and Vendor.(No need to wipe Internal Storage)
Flash latest china beta firmware for good battery and deep sleep(Optional)
Flash the rom package
Reboot
Gapps is not needed to be flashed.
Note:-First boot may take 4-5 minutes.
Bugs:-
Face lock
Ambient display
Off-screen gesture
Maybe more
Downloads:-
ROM :- https://drive.google.com/file/d/1lYYyuW9xXhGVumOXdHb2XrQE3JGZQjVs/view?pli=1
Troubleshootings:-
-If you face green whatsapp camera bug,remove cam2api in system/vendor/build.prop
-If you face headset bug just flash the headsetfix zip provided below.
- Disable noise cancellation option in phone settings to fix the issue of calls using earphones
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP, Unlocked bootloader
Contributions:-
@jadeja shaktisinh(The one who ported the rom)
@Boos4721 (Without whom this port wouldn't be possible)
@GeraldF7(For constant help and support)
Donations:-
https://www.paypal.me/smjadeja
Created:- 2019-02-18
Last Updated:- 2019-02-18

Changelogs:-
Hotspot Fixed
No need to force reboot
Pre rooted just install Magisk manager
Camera works
Navigation gestures fully working

Screenshots

Nice rom Bro :good:

Thanks for the rom
Camera is crashing
Gcam is crashing
Open camera working good
UPDATE
camera working fine after disabling camera 2 api

this ROM support F2FS without bootloop?

megaabel90 said:
this ROM support F2FS without bootloop?
Click to expand...
Click to collapse
Not tried
---------- Post added at 03:53 AM ---------- Previous post was at 03:49 AM ----------
megaabel90 said:
this ROM support F2FS without bootloop?
Click to expand...
Click to collapse
Not tried

TheKsM said:
Nice rom Bro :good:
Click to expand...
Click to collapse
Enjoy and if you face any bugs please report??

giannis_25 said:
Thanks for the rom
Camera is crashing
Gcam is crashing
Open camera working good
UPDATE
camera working fine after disabling camera 2 api
Click to expand...
Click to collapse
Ofc

Double tap to wake work?

Irfan_ said:
Double tap to wake work?
Click to expand...
Click to collapse
Working as expected

Headset fixer not working.phone heating up rapidly.what to do,any fixes

sexbuddytt said:
Headset fixer not working.phone heating up rapidly.what to do,any fixes
Click to expand...
Click to collapse
No such problems here. Try clean flash again.

No issues no as I flashed the headset fixer zip via magisk.thanks anyway for such an amazing port of an amazing rom

Rom is not smooth as miui, I'm uninstalled today. And flashback to miui pro. Hope a not laggy rom will come for our device

jadeja shaktisinh said:
Not tried
---------- Post added at 03:53 AM ---------- Previous post was at 03:49 AM ----------
Not tried
Click to expand...
Click to collapse
F2FS=bootloop :C
But "VIMB kernel" works well and has a good perfomance this ROM
---------- Post added at 04:31 PM ---------- Previous post was at 04:10 PM ----------
I have a question, why does the desktop expanded in games look so...square?
I can configure that?(sorry for my question noob)
---------- Post added at 04:53 PM ---------- Previous post was at 04:31 PM ----------
megaabel90 said:
F2FS=bootloop :C
But "VIMB kernel" works well and has a good perfomance this ROM
---------- Post added at 04:31 PM ---------- Previous post was at 04:10 PM ----------
I have a question, why does the desktop expanded in games look so...square?
I can configure that?(sorry for my question noob)
Click to expand...
Click to collapse
ignore my question, i'll fix it xd

Everything works fine except tat ambient display and lockscreen gestures........ But little bit laggy can be fixed with kernel auditor
Camera working absolutely fine

Settings Keeps crashing!!!
This is the message that is being displayed after the first and every boot!! I have done all the clears except internal storage still it is displaying the same and this cannot be minimized also!! Kindly help me with this issue

Sainath2000 said:
Settings Keeps crashing!!!
This is the message that is being displayed after the first and every boot!! I have done all the clears except internal storage still it is displaying the same and this cannot be minimized also!! Kindly help me with this issue
Click to expand...
Click to collapse
It says like setting or something isn't responding....... Click on wait and it ll be solved

Sainath2000 said:
Settings Keeps crashing!!!
This is the message that is being displayed after the first and every boot!! I have done all the clears except internal storage still it is displaying the same and this cannot be minimized also!! Kindly help me with this issue
Click to expand...
Click to collapse
Its only once during every boot. It shouldn't be a problem