I try to flash this version "twrp-3.1.0-0-vtr.img" on my "P10 plus" (Model VKY-L09), through the 3 steps :
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.0-0-vtr.img
3. reboot to recovery!
But when i try to boot mainy times into recovery by holding "vol+ & power button" it show unsafe screen each time i do it and it pass to Huawei eRecovery!!
I choose another method through prompt commands via this commnad "fastboot boot twrp-3.1.0-0-vtr.img", then an error message appear "command remote not allowed".
Tell me Guys if there another efficient method to root P10 plus.
thank you
try HWOTA is best flash tool https://drive.google.com/open?id=0B3zr0V7YRX9pMlJkVXpNQzZ0Vmc
when you flash TWRP installed then unplug cable close flash tool dont get next step
---------- Post added at 12:55 AM ---------- Previous post was at 12:54 AM ----------
try HWOTA is the best flash tool https://drive.google.com/open?id=0B3zr0V7YRX9pMlJkVXpNQzZ0Vmc
Related
I came esta upgrade and had previously rooted and will not let me install I put the official says recovery not fail me
cm13.1 -znh2kas254 incremental
why dont you manually flash (recovery?) or update over fastboot
bobthecooldad said:
why dont you manually flash (recovery?) or update over fastboot
Click to expand...
Click to collapse
how do you update over fastboot ?? don't we need stock recovery for that ?
no, you need to first install (http://forum.xda-developers.com/showthread.php?p=48915118#post48915118)
Now turn off your phone and hold volume up at the same time you press the power button (with the usb cable in)
To check if the device is detected, run cmd and run "fastboot", lots of text should appear if nothing does reinstall or reboot. To check for devices do "fastboot devices"
---------- Post added at 02:45 PM ---------- Previous post was at 02:43 PM ----------
this is for recovery
fastboot flash recovery recovery.img
(recovery needs to be in your username drive (Windows 7-10 for example for me it is C:\users\gaming)
(credit to http://forum.xda-developers.com/showthread.php?t=2131284 for information)
can someone help me out? i was unlocking my phone. i wasnt concentrating and i mixed up 2 diff steps. so basically i have twrp but my bootloader is locked so i cant boot in to cyanogen which i instlled............ any help?
http://forum.xda-developers.com/axon-7/how-to/guide-how-to-unlock-bootloader-stay-t3461165 flash the file in TWRP and continue to unlock - you may need to flash CM again when you all done, but if you have TWRP then unlocking should be easy
@tabletalker7 i do have twrp and i did follow those steps but when i am in bootloader and i type fastboot oem unlock i get nothing
i did try that and i have twrp, but when i go to bootloader and i type fastboot oem unlock i get nothing
ok did you try http://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484 you can flash the correct stock rom file in TWRP
Thanks man i will see if it works
thankfully it did, but i am still unable to unlock, its stuck on waiting for devices
waiting on devices? Did you reinstall TWRP and then flash the D
rakenFX file?
no in adb command window i am unable to unlock it
the fastboot oem unlock command
http://forum.xda-developers.com/axon-7/how-to/guide-how-to-unlock-bootloader-stay-t3461165 post one for us version post 100 for EU version - you have to flash a file in TWRP before you can unlock
could you help me with step 6 fbop_lock.img
US version or EU version?
us
ok - before you go to TWRP ensure that the phone is in USB debugging mode and Enable OEM unlock is on
yup done
after that?
boot to TWRP, then plug into PC. Open a command prompt and type "adb devices". You should see the serial number of your device and recovery as it's state
---------- Post added at 10:48 PM ---------- Previous post was at 10:47 PM ----------
When you have that type "adb shell dd if= /dev/block/bootdevice/by-name/fbop of=/sdcard/fbop_lock.img" You can even copy from this and paste it in the command prompt
i did that, but after that step 6 idk what that is
When it is done with all that type "adb pull /sdcard/fbop_lock.img"
My phone is unlocked and I had installed TWRP. I restored from previous backup because I was not satisfied with latest global developer ROM. after restoring I am not able to reboot into recovery. when I boot into recovery, my phone starts normally without going into recovery. i tried flashing twrp again and it works only once. phone boots normally without going into recovery. i have to flash twrp everytime i need to use recovery. any solutions?
Do you confirm the thing TWRP asks you on first boot (something about allowing system modifications or what)? Otherwise system may remove it on boot. Do you use command 'fastboot boot 'recoveryname'' after flashing (I don't know why is it necessary, but it's in every guide for R3S)?
Send from my Redmi 3S
Make sure 'OEM unlocking' is checked in developers mode.
Pwr + vol+ + vol- until it vibrates, then release pwr, but keep both vol-keys pressed.
---------- Post added at 12:37 PM ---------- Previous post was at 12:33 PM ----------
Another option is adb: Use "adb reboot recovery". If you don't know how, ask me!
Find the solution here
https://forum.xda-developers.com/xiaomi-redmi-3s/help/boot-twrp-t3606570
run miflash unlocker and unlock bootloader i know this problem and i fixed it
Hello. I may have bricked my phone trying to install TWRP. I must have failed in installing because it only bootloops now. I cant boot into OS and also recovery. I can only boot into fastboot mode. I tried flashing recovery.img but still cannot boot into recovery. pls send help T.T
Os version is oreo and in the feb security patch
also i tried typing "fastboot erase cache" and "fastboot erase userdata" to wipe but nothing happened. What can i do
Aarawrn said:
Hello. I may have bricked my phone trying to install TWRP. I must have failed in installing because it only bootloops now. I cant boot into OS and also recovery. I can only boot into fastboot mode. I tried flashing recovery.img but still cannot boot into recovery. pls send help T.T
Os version is oreo and in the feb security patch
also i tried typing "fastboot erase cache" and "fastboot erase userdata" to wipe but nothing happened. What can i do
Click to expand...
Click to collapse
1) Download Oreo RAW for ZenFone 3:
ZE520KL: https://drive.google.com/drive/folders/1-cPPsOKlhHqdqAtYTAaSeaHfcTXReTmW
ZE552KL: https://drive.google.com/drive/folders/1sDO09vDONlHcuadd8W9kfXe07syuo0Tw
2) Download ASUS Flash Tool
https://drive.google.com/drive/folders/1Zmc9L0tPbSMSkzHfmSAA_0AxzTRZffP6
3) Enter Fastboot Mode on your device.
4) Open ASUS Flash Tool and select your device.
5) Connect your phone to your PC & your serial number will pop out on AFT.
6) Select the RAW firmware & flash (wait 10- 15 mins) [You'll get error 5 (ignore it)]
Your phone is now fixed
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
Aarawrn said:
Hello. I may have bricked my phone trying to install TWRP. I must have failed in installing because it only bootloops now. I cant boot into OS and also recovery. I can only boot into fastboot mode. I tried flashing recovery.img but still cannot boot into recovery. pls send help T.T
Os version is oreo and in the feb security patch
also i tried typing "fastboot erase cache" and "fastboot erase userdata" to wipe but nothing happened. What can i do
Click to expand...
Click to collapse
If you want to use TWRP on stock ROM, please FLASH Magisk.
Without flashing Magisk, your device will bootloop (same case as yours)
Saktis_STi said:
1) Download Oreo RAW for ZenFone 3:
ZE520KL: https://drive.google.com/drive/folders/1-cPPsOKlhHqdqAtYTAaSeaHfcTXReTmW
ZE552KL: https://drive.google.com/drive/folders/1sDO09vDONlHcuadd8W9kfXe07syuo0Tw
2) Download ASUS Flash Tool
https://drive.google.com/drive/folders/1Zmc9L0tPbSMSkzHfmSAA_0AxzTRZffP6
3) Enter Fastboot Mode on your device.
4) Open ASUS Flash Tool and select your device.
5) Connect your phone to your PC & your serial number will pop out on AFT.
6) Select the RAW firmware & flash (wait 10- 15 mins) [You'll get error 5 (ignore it)]
Your phone is now fixed
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
If you want to use TWRP on stock ROM, please FLASH Magisk.
Without flashing Magisk, your device will bootloop (same case as yours)
Click to expand...
Click to collapse
still no recovery,any other fix please?this my only phone,please help
herumukti9901 said:
still no recovery,any other fix please?this my only phone,please help
Click to expand...
Click to collapse
at what stages do you have problems? did you manage to launch to system?
make screenshots or provide additional info, please.
I've restored my phone with different RAW (service) firmwares (oreo, nougat, marshmellow) installed magisk (on everyone) and even managed to launch orangefox recovery for our model.
TrickyJoe said:
at what stages do you have problems? did you manage to launch to system?
make screenshots or provide additional info, please.
I've restored my phone with different RAW (service) firmwares (oreo, nougat, marshmellow) installed magisk (on everyone) and even managed to launch orangefox recovery for our model.
Click to expand...
Click to collapse
recovery succes to install in cmd,,but not start (just blackscreen) in PC 9008 diagmode
At the moment I'm just starting to write this guide. My English is bad , so please help me: write down the mistakes I made and how to fix them. :highfive:
Software
ADB/Fastboot
Drivers for ADB/Fastboot
Flash.bat
Needed firmware (now i recomend install TOS373J)
Remember! With firmware you will lose all your data!
Installing
1. Unpack adb.zip and flash.zip to C:\Android
2. Unpack your shoosen firmware to C:\Android
3. Open developer options and turn on "OEM unlocking"
4. Power off smartphone,press "+" and "power"
5. Connect smartphone to PC and install drivers
6. Open cmd and write "cd C:\Android"
7. Next "fastboot oem unlock" and accept on display of smartphone
8. After reboot power off smartphone and press "+" and "power"
9. Write "fastboot flashing unlock_critical" and accept on display of smartphone
10. Open flash.bat in C:\Android and press "enter"
11. Wait when flashing finish and disconnect smartphone
12. After flash finishing write "fastboot flashing lock_critical" and wait reboot
13. Next boot to fastboot and write "fastboot oem lock" and wait reboot
I'm trying to use this on my swift 2 (Oreo) I get a lot of errors when I run flash.bat.
---------- Post added at 08:54 PM ---------- Previous post was at 08:47 PM ----------
Are there commands to flash the image via cmd?
Kenif1983 said:
I'm trying to use this on my swift 2 (Oreo) I get a lot of errors when I run flash.bat.
---------- Post added at 08:54 PM ---------- Previous post was at 08:47 PM ----------
Are there commands to flash the image via cmd?
Click to expand...
Click to collapse
Need flash via cmd.exe.