PLZ help, is it software or hardware problem? - Galaxy Note 3 Q&A, Help & Troubleshooting

I have Samsung Galaxy Note 3 SM9005
I installed Phronesis-N9005-N5-v6.5 ROM from 11 months ago, and it was awesome and worked very well
Till 2 weeks ago, the mobile started to hang strangely especially with applications which increase CPU usage as I think like Clash of Clans, facebook and twitter, the screen shake not the mobile then it back to normal
this hanging is described in following video
https://youtu.be/q_zMRypkio8
I made factory reset with all possible ways, but the problem still exist
I backed to stock software N9005XXUGBPF5_N9005OJVGBPF1_EGY, but the problem still exist
So, what is the problem? how can I solve?

Either.
Suggest running a kernel cleaner .
Then wipe and format flash stock rom through Odin .
Test with no added apps .

JJEgan said:
Either.
Suggest running a kernel cleaner .
Then wipe and format flash stock rom through Odin .
Test with no added apps .
Click to expand...
Click to collapse
More explain ? Which kernel cleaner?
Thanks in advance for your reply

Related

[Q&A] [ROM] [i9505] MIUI v5 4.9.26 Multilang [CM Base 4.4.4 M9] *01.10.14*

Q&A for [ROM] [i9505] MIUI v5 4.9.26 Multilang [CM Base 4.4.4 M9] *01.10.14*
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Data issue. H changes to G on wake
My problem is that whenever I wake my device, the data H symbol changes to a G 2-3 secs later. Browsing or using apps that require data is impossible and may take 5-10 mins + to display anything.
Network shows unknown.
> I've tried changing several basebands - currently back on XXUFNC4.
> Tried *#*#4636#*#* and setting data there
> Preferred Network Type in mobile networks is set to LTE preferred/3G.
> Set /data/property/presist.radio.eons.enabled to 'true'. Recommended on another forum for a LTE issue but tried all the same.
> Tried reflashing stock firmware and redoing root, recovery etc
> I have an unlimited data plan on U.K EE network
My phone is a new GTi9505 and came with stock 4.4.2 XXUFNC4, with a new sim card that gives ok data on another handset.
I'm currently using 4.4.4 Gpe with MIUI v6 experience launcher and data is fine but I 'only' have this issue with MIUI v5 4.x.xx Multilang [CM Base 4.4.4 M9], and yes this is the only firmware I would like to use and get along with.
Cannot post on the forum that provides this Rom due to post count, so if anyone can help i'd be extremely greatful.
Thanks
hello I selected the Portuguese language and my system is in english
someone can help me fix all in Portuguese please?
Is there any camera that can flashing I do not like this way of camera
i love this rom
teamflex said:
My problem is that whenever I wake my device, the data H symbol changes to a G 2-3 secs later. Browsing or using apps that require data is impossible and may take 5-10 mins + to display anything.
Network shows unknown.
> I've tried changing several basebands - currently back on XXUFNC4.
> Tried *#*#4636#*#* and setting data there
> Preferred Network Type in mobile networks is set to LTE preferred/3G.
> Set /data/property/presist.radio.eons.enabled to 'true'. Recommended on another forum for a LTE issue but tried all the same.
> Tried reflashing stock firmware and redoing root, recovery etc
> I have an unlimited data plan on U.K EE network
My phone is a new GTi9505 and came with stock 4.4.2 XXUFNC4, with a new sim card that gives ok data on another handset.
I'm currently using 4.4.4 Gpe with MIUI v6 experience launcher and data is fine but I 'only' have this issue with MIUI v5 4.x.xx Multilang [CM Base 4.4.4 M9], and yes this is the only firmware I would like to use and get along with.
Cannot post on the forum that provides this Rom due to post count, so if anyone can help i'd be extremely greatful.
Thanks
Click to expand...
Click to collapse
you can also get no LTE? right?
---------- Post added at 01:26 PM ---------- Previous post was at 01:25 PM ----------
DiogoSepultura said:
hello I selected the Portuguese language and my system is in english
someone can help me fix all in Portuguese please?
Is there any camera that can flashing I do not like this way of camera
i love this rom
Click to expand...
Click to collapse
i will look in to this .. maybe the language is broken in the new rom
natorus87
I don't have LTE from ee just standard unlimited 3g ( on my current Gpe rom it shows hc-dspa+ ). In all honesty your Rom is awesome so really want to get back to using that. Ive tried all your builds and the one and only issue is on wake H turns to G and data is terrible.
natorus87 said:
you can also get no LTE? right?
---------- Post added at 01:26 PM ---------- Previous post was at 01:25 PM ----------
i will look in to this .. maybe the language is broken in the new rom
Click to expand...
Click to collapse
The correction of the Portuguese language will only be completed in the next update?
I checked that I was without root access too, do not know how to fix it anyone know?
graphics on miui are the best in my opinion but sincerely nomatter what phone you install it on , drains the battery amazingly fast ....
alejayjohn said:
graphics on miui are the best in my opinion but sincerely nomatter what phone you install it on , drains the battery amazingly fast ....
Click to expand...
Click to collapse
my s4 battery discharges normally as in other roms, I tested this rom on Antutu Benchmark and the graphics are not very good
I really like this rom, very light, almost perfect, the only ones who encounter problems are
The music player stops playing my music and they are erased from the card ... as music player use wallkman
portuguese language is not there, it's all in English
I enabled root access that was disabled
and not like the appearance of the camera
everything else is perfect for me
Hello All! today i received a new GT i9505 with 4.4.2 XXUFNC4 already i have it rooted and with philz_touch_6.23.9-jflte recovery installed, now i can install this miui or another 4.4.4 based roms right?
Thanks to all!
Is there a way to get infrared working on this rom it worked on previous build?
Sent from my GT-I9505 using Tapatalk
Finaly i install this rom, only one bug at the moment, the data icon says me G even with only 3g in settings, i know i have 3g checked with speed test app to see my data speed, how i can fix the icon?
not have slow motion video recording?
Good day, I'm from Brazil and would like to know if there is some setting in miui that leave us lost the notifications icons in applications eg whatsapp and facebook so I noticed that notifications are only patterns Rom applications.
Thank you
dogasantana said:
Good day, I'm from Brazil and would like to know if there is some setting in miui that leave us lost the notifications icons in applications eg whatsapp and facebook so I noticed that notifications are only patterns Rom applications.
Thank you
Click to expand...
Click to collapse
Go to the security app/permissions/autorun management and then if your app is not shown then press manually add auto start apps/ then allow WhatsApp Facebook gmail Tapatalk..... Etc then reboot
Sent from my GT-I9505 using Tapatalk
1eyedmonster said:
Go to the security app/permissions/autorun management and then if your app is not shown then press manually add auto start apps/ then allow WhatsApp Facebook gmail Tapatalk..... Etc then reboot
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
good afternoon
Sorry, could not find these settings, Could explain again to me step by step please.
Finally wanted to flash my phone after 1 year.
Would like to know how should I get my phone to be updated to "latest firmware"?
This is because I root at 4.2.2, which is totally out of date.
Also how different is flashing this ROM against the HTC Desire days back when it was Froyo and Gingerbread?
I used to play around MIUI during then and flash almost weekly for their updates, but there are too many different terms now so I just wanted to make sure.
Thanks.
Zychron said:
Finally wanted to flash my phone after 1 year.
Would like to know how should I get my phone to be updated to "latest firmware"?
This is because I root at 4.2.2, which is totally out of date.
Also how different is flashing this ROM against the HTC Desire days back when it was Froyo and Gingerbread?
I used to play around MIUI during then and flash almost weekly for their updates, but there are too many different terms now so I just wanted to make sure.
Thanks.
Click to expand...
Click to collapse
Flash latest firmware from sammobile. Com and http://www.sammobile.com/firmwares/checker/ and flash with Odin , in regards to the flashing procedure it is the same. custom Recovery's have not changed much since 2010 only difference is there are now 3 options cwm,twrp and philz recovery.
I use twrp as it is still in development while cwm and philz are classed as finished.
remember a ?
? My ? With My Miui ? Ship
1eyedmonster said:
Flash latest firmware from sammobile. Com and flash with Odin , in regards to the flashing procedure it is the same. custom Recovery's have not changed much since 2010 only difference is there are now 3 options cwm,twrp and philz recovery.
I use twrp as it is still in development while cwm and philz are classed as finished.
remember a ?
? My ? With My Miui ? Ship
Click to expand...
Click to collapse
Doesn't latest firmware comes with Knox?
Anyway, I've tried flashing to MIUI.EU without updating the firmware. It seems I cannot get my WiFi to work even after flashing the recommended Kernels. Do you think firmware/baseband is the issue?
I'm now running on PAC ROM and that too has issue with mobile data preferred network not sticking, it changes itself even after I set it with #*#*4636*#*#. Sometimes when I'm in an area without LTE, the mobile data goes off when my phone goes to sleep.
I googled and some said after 4.4.4 many had this problem, but seen none complaining in the PAC rom thread. Possibly firmware as well?
Thanks.
Zychron said:
Doesn't latest firmware comes with Knox?
Anyway, I've tried flashing to MIUI.EU without updating the firmware. It seems I cannot get my WiFi to work even after flashing the recommended Kernels. Do you think firmware/baseband is the issue?
I'm now running on PAC ROM and that too has issue with mobile data preferred network not sticking, it changes itself even after I set it with #*#*4636*#*#. Sometimes when I'm in an area without LTE, the mobile data goes off when my phone goes to sleep.
I googled and some said after 4.4.4 many had this problem, but seen none complaining in the PAC rom thread. Possibly firmware as well?
Thanks.
Click to expand...
Click to collapse
Are you flashing the kk kernels try googmax kernel https://mega.co.nz/#!dg9GVKLb!V_uqH4SeBXZufjyKBOxS1My7Kau4_8KpBDaPIMePrws
remember a ?
? My ? With My Miui ? Ship
1eyedmonster said:
Are you flashing the kk kernels try googmax kernel
remember a ?
? My ? With My Miui ? Ship
Click to expand...
Click to collapse
I get it this will work for MIUI.EU as well? Not just narutos' version?
Thanks a lot.

[Q] : Install 4.4.4 MIUI 6 On Yureka After Updating To Lollipop

Hey Guys , I ' m New To Android And New On Xda . I Updated My Yureka To Lollipop Yesterday And I Couldn ' t Tolerate The Lags And Issues So I Decided To Flash MIUI 6 From http://forum.xda-developers.com/yureka/development/rom-miui-v5-2-27-yureka-t3043035 . When I Flashed It According To 2nd Video Instruction By Dj408 , I Had Random Reboot Issue . I Really Dont Want To Go Back To Cm12 Unless The 'Issues Are Solved , Also Wanna Try MIUI . So Please Let Me Know If It ' s Possible To Install The MIUI 6 On My Yureka .
If It Helps :
- I Followed Mounting And Formatting Instructions Exactly As Mentioned In 2nd Video Using CWM , No Mistakes
- I Installed The Rom From SdCard1 Because I Had Not Copied It In Phone Memory
- Also , Before Random Reboot , During MIUI Setup , Wifi Networks Were Not Showing While They Worked On My CM12
- I Did Not Get The Message That Stock Recovery Would Be Installed After Clicking On Reboot System Now
Any Help Would Be Greatly Appreciated . Thanks In Advance
techfreak.rawmess said:
Hey Guys , I ' m New To Android And New On Xda . I Updated My Yureka To Lollipop Yesterday And I Couldn ' t Tolerate The Lags And Issues So I Decided To Flash MIUI 6 From http://forum.xda-developers.com/yureka/development/rom-miui-v5-2-27-yureka-t3043035 . When I Flashed It According To 2nd Video Instruction By Dj408 , I Had Random Reboot Issue . I Really Dont Want To Go Back To Cm12 Unless The 'Issues Are Solved , Also Wanna Try MIUI . So Please Let Me Know If It ' s Possible To Install The MIUI 6 On My Yureka .
If It Helps :
- I Followed Mounting And Formatting Instructions Exactly As Mentioned In 2nd Video Using CWM , No Mistakes
- I Installed The Rom From SdCard1 Because I Had Not Copied It In Phone Memory
- Also , Before Random Reboot , During MIUI Setup , Wifi Networks Were Not Showing While They Worked On My CM12
- I Did Not Get The Message That Stock Recovery Would Be Installed After Clicking On Reboot System Now
Any Help Would Be Greatly Appreciated . Thanks In Advance
Click to expand...
Click to collapse
Right now your on CM12 right..... Well sadly I have to say if your on CM12 then you can't downgrade your os now cox cm12 for yureka is based on 64bit and its already instructed before releasing the update and highly mentioned... Do not try to flash CM11 if your flash CM12 other wise your phone will be hard bricked.....
thanks for the reply . i really hate lollipop on yureka , m facing lots of issues like heating on normal usage and slow charging . i hope we get a MIUI port for lollipop soon . will be using unofficial cm12.1 for now
??? I wonder how your handset is still alive after flashing MIUI over cm12s and how you were able to flash unofficial CM12 (32bit) over it again?
[email protected] said:
??? I wonder how your handset is still alive after flashing MIUI over cm12s and how you were able to flash unofficial CM12 (32bit) over it again?
Click to expand...
Click to collapse
yeah , i updated to cm12 lollipop but it had many bugs so tried to flash MIUIv6 ( had no idea downgrade is not supported and might hard brick ) . i had frequent reboot issue on MIUI ROM even after following every instruction correctly . then i switched back to the buggy cm12 . found cm12.1 unofficial on xda and flashed it and the bugs and lags are gone , at least for now . . .
techfreak.rawmess said:
Hey Guys , I ' m New To Android And New On Xda . I Updated My Yureka To Lollipop Yesterday And I Couldn ' t Tolerate The Lags And Issues So I Decided To Flash MIUI 6 From http://forum.xda-developers.com/yureka/development/rom-miui-v5-2-27-yureka-t3043035 . When I Flashed It According To 2nd Video Instruction By Dj408 , I Had Random Reboot Issue . I Really Dont Want To Go Back To Cm12 Unless The 'Issues Are Solved , Also Wanna Try MIUI . So Please Let Me Know If It ' s Possible To Install The MIUI 6 On My Yureka .
If It Helps :
- I Followed Mounting And Formatting Instructions Exactly As Mentioned In 2nd Video Using CWM , No Mistakes
- I Installed The Rom From SdCard1 Because I Had Not Copied It In Phone Memory
- Also , Before Random Reboot , During MIUI Setup , Wifi Networks Were Not Showing While They Worked On My CM12
- I Did Not Get The Message That Stock Recovery Would Be Installed After Clicking On Reboot System Now
Any Help Would Be Greatly Appreciated . Thanks In Advance
Click to expand...
Click to collapse
i am facing problem i have installed tge miui 6 on my yureka its does not contains gapps n when i am steaming audio it trips sometimes plz help me out :'( thanks in advance ......

[ROM] [WIP] [P600] [TW 5.0.2] [help needed] Iron ROM port for Galaxy Note 10.1 2014

In this Thread I will port the Iron Rom from the Tab S to our Note 2014
Thanks to Tkkg1994 for making the awsome Iron Rom and xluco for the Kernel
Just to be clear: I didn't developed the Iron Rom (http://forum.xda-developers.com/galaxy-tab-s/development/prerooted-stock-touchwiz-rom-t2973107) nor the xluco Kernel (http://forum.xda-developers.com/showthread.php?t=2725193. I just put them together.
Ok, first how you install the Iron Rom: Download the Iron Rom for the T800 and the xluco Kernel for SM-P600 first and put them on external SD Card. After that go into Recovery and wipe EVERYTHING exept external storage. Maby you can also wipe system only but i highly recommend yout to wipe everything. Install now the Iron Rom and DO NOT CHECK REBOOT AFTER THE IRON ROM INSTALLATION, when it has finished, install the xluco kernel. Than do a Reboot. for me, the Rom took some time to boot, and often did some random reboots. when you see the assistant, you have to be very fast, dont configure anything, as I already said before, it will very likely crash after some time.
So, now why I opned this Thread: I'm not a developer, so I cannot do this by myself. Hope I will get some help, I know everybody is waiting for a Lollipop Custom Rom
good point mate ... Maybe I'm going to give other CRs of that a Try ... have you tried that with other Custom ROMs like AOSP ones or others ?
Yes, I did. In the past I could get a KitKat Rom from our big brother P900 running on my device using the same method as I used here.
wulkanat said:
In this Thread I will port the Iron Rom from the Tab S to our Note 2014
Thanks to Tkkg1994 for making the awsome Iron Rom and xluco for the Kernel
Just to be clear: I didn't developed the Iron Rom (http://forum.xda-developers.com/galaxy-tab-s/development/prerooted-stock-touchwiz-rom-t2973107) nor the xluco Kernel (http://forum.xda-developers.com/showthread.php?t=2725193. I just put them together.
Ok, first how you install the Iron Rom: Download the Iron Rom for the T800 and the xluco Kernel for SM-P600 first and put them on external SD Card. After that go into Recovery and wipe EVERYTHING exept external storage. Maby you can also wipe system only but i highly recommend yout to wipe everything. Install now the Iron Rom and DO NOT CHECK REBOOT AFTER THE IRON ROM INSTALLATION, when it has finished, install the xluco kernel. Than do a Reboot. for me, the Rom took some time to boot, and often did some random reboots. when you see the assistant, you have to be very fast, dont configure anything, as I already said before, it will very likely crash after some time.
So, now why I opned this Thread: I'm not a developer, so I cannot do this by myself. Hope I will get some help, I know everybody is waiting for a Lollipop Custom Rom
Click to expand...
Click to collapse
@wulkanat @hitman1376 were either of you able to get this ROM running on your device? If so, which build did you use? I've tried at least a dozen different configurations via Aroma Installer on both the 2.4.5 and 2.5 builds, but the SystemUI crashes on me within seconds of booting up every time.
raneym305 said:
@wulkanat @hitman1376 were either of you able to get this ROM running on your device? If so, which build did you use? I've tried at least a dozen different configurations via Aroma Installer on both the 2.4.5 and 2.5 builds, but the SystemUI crashes on me within seconds of booting up every time.
Click to expand...
Click to collapse
To be honest , I didn't try it out ... but , as the devices have so many things in common , it wasn't so odd ... but , does it happen the same on the MM ROM ?
With Best Wishes
Hitman1376​
hitman1376 said:
To be honest , I didn't try it out ... but , as the devices have so many things in common , it wasn't so odd ... but , does it happen the same on the MM ROM ?
With Best Wishes
Hitman1376​
Click to expand...
Click to collapse
You would think so. A couple years ago, it seemed like most apps/features were interchangeable between the Note 2014, Note Pro, Tab Pro, and Tab S on Kitkat. I distinctly remember my go-to ROM was originally designed for the Note Pro.
As far as IronROM V3.0 (MM) goes, the Aroma installer detected my device right away and put the kibosh on that experiment... not that it would have worked anyway seeing as how we don't have a 6.0.1 kernel... I was just hoping to get enough of the ROM installed so I could use TWRP's file manage to extract the files I want while still in recovery.
Anyway, now that my Note7 will be stuck with a non-rootable, unsupported, firmware for eternity; I figured it'd be fun to grab my old SM-P600 and see what havoc I can wreak on it.
raneym305 said:
You would think so. A couple years ago, it seemed like most apps/features were interchangeable between the Note 2014, Note Pro, Tab Pro, and Tab S on Kitkat. I distinctly remember my go-to ROM was originally designed for the Note Pro.
As far as IronROM V3.0 (MM) goes, the Aroma installer detected my device right away and put the kibosh on that experiment... not that it would have worked anyway seeing as how we don't have a 6.0.1 kernel... I was just hoping to get enough of the ROM installed so I could use TWRP's file manage to extract the files I want while still in recovery.
Anyway, now that my Note7 will be stuck with a non-rootable, unsupported, firmware for eternity; I figured it'd be fun to grab my old SM-P600 and see what havoc I can wreak on it.
Click to expand...
Click to collapse
Well , if you just want to play around , you can try out the stock Lollipop with my Prime Kernel and get better Performance and Battery or even CM13 / CM14 ... about the aroma , you can disable the device verification ... also I guess you can force the TW MM boot with Lollipop Kernel like it boots CM13 and CM14 ( I don't mean booting without any problems and also don't forget T-805's MM Kernels !! ) the Biggest problem is that we don't have a MM Bootloader which is the biggest problem ... anyway , this device is still so powerful to play newest games and OSs ... It's not fair to abandon it :laugh: ... You know ? I had a very busy day and I have been awake since around 6 AM when I woke for salat till now which is 12:41 AM :crying: !! so , My brain doesn't have any more juice and I need to get some sleep ... I hope you like my kernel ( esp. In case you'd like to test it out :laugh: ) ... I Updated it just some minutes ago
With Best Wishes
Hitman1376​

redmi 2 prime camera problem

hlw people ,
needed some help .
hope you are able to ,
actually , I am on redmi 2 prime global beta 6.9.29.
everything was ok till a couple of days ago . but recently , I came to discover that my front camera has stopped working . neither the pre installed apps nor the 3rd party camera apps are able to aceess it .
since I am on , miui 8 (beta) , I am unable to uninstall the official camera app .
NOTE : The other camera is working absolutely fine.
can you guys help me out . pleeaassee........
[I don't wanna root my phone or install any 3rd party rom ].
I have attached screenshot for convenience. Please go through it.
[ I have already tried force stopping app , clearing its cache and data , and reebooting my Android . Nothing works
go to settings
installed apps
find camera app
clear data and caches!
if this dosent work change the rom!
of flash the rom again(clean flash)
last but not the least
use the stable rom 7.5.3 LP stable
Ronnie.mac94 said:
go to settings
installed apps
find camera app
clear data and caches!
if this dosent work change the rom!
of flash the rom again(clean flash)
last but not the least
use the stable rom 7.5.3 LP stable
Click to expand...
Click to collapse
the cache clear method didn't work .
and I have updated rom to 6.9.29 but the problem still persists.
Are you sure , changing to global stable will solve my problem ...?.????.?

Which is the best Android 6 rom For k3 Note , for TWRP install.

Which is the best Android 6 rom , I have tried Androium , but one or two important apps for me , just crash each time I click the app....I have tried various things such as wipe dev , cache etc.
So which is the best Android 6 rom on XDA forum , that can be installed using TWRP ?
there is no such thing as "best custom ROM". Everyone has he's own preferences. Some say Androrium is the best, some say 1631 DEV (there are few versions of that one) is the best, ...etc. I'm still currently using Nexus MM by dr.Root from needrom website. Even that one has a minor bug(s) but nothing deal-breaking for me. I don't have the time to swap roms and the first rom I tried (4 months ago) was good enough so I stick with it.
People on needrom say that "Play edition v2" from the same developer is even better. I don't have stable Wifi connection here (where I currently live) so I didn't try it.
All roms I mentioned are installable via TWRP. And my rom doesn't have any issue with eBay app. I use the app.
Good luck finding the best rom for yourself!
Chears! :highfive:
Thank you so much , I shall give the "Play Edition 2" rom a test drive.
Only thing my big problem is , I installed Androium , very nice rom , but it crashes some of my apps , such as eBay app(needed for work) , so I tried various other roms , they all crash eBay app , eBay will work to begin with , then after a reboot , eBay stops working , so I went back to the original Android 5 version of Sensation rom by MDS , I have been using that rom for over a year....Brillant rom , works on everything....
Any ideas why eBay app will crash after a full format on the phone , clean install of the latest roms ! but on a very old rom , no problem it works perfectly......It is such a shame , as I would like andorid 6 on my k3 note....brilliant phone.
justwondering said:
Thank you so much , I shall give the "Play Edition 2" rom a test drive.
Only thing my big problem is , I installed Androium , very nice rom , but it crashes some of my apps , such as eBay app(needed for work) , so I tried various other roms , they all crash eBay app , eBay will work to begin with , then after a reboot , eBay stops working , so I went back to the original Android 5 version of Sensation rom by MDS , I have been using that rom for over a year....Brillant rom , works on everything....
Any ideas why eBay app will crash after a full format on the phone , clean install of the latest roms ! but on a very old rom , no problem it works perfectly......It is such a shame , as I would like andorid 6 on my k3 note....brilliant phone.
Click to expand...
Click to collapse
I have no idea why would eBay app crash. Maybe you use some mods that conflict with it? I am not experienced with modding so I can't help much. Did you wipe everything? Maybe there are some leftovers in your internal storage .... I never had an issue with eBay app. Although, some apps (that I was using on my older phone, i.e. some weather app) had issues, so I replaced those apps. Didn't have time to investigate the issue. Apps that I rely on work flawlessly.
I hope you will have luck with "Play edition v2".

Categories

Resources