Related
Good night everyone.
This it's very much patched compared to the stock kernel and it's aim is for performance/battery balance. The main features are:
19 November
* Reverts to ensure maximum stability
* Strange reboots should be fixed
* Old frequency table back - stability comes first
* More debugging **** disabled
* Updated Smartass2
* Tweaked Conservative
* Updated Interactive
* Remove a bunch of obsolete governors
* Deadline I/O scheduler tweaked for flash devices and made default
* Special minfree settings set on the source - no need for an extra init.d for this
* Special ext3 mounting flags set on the source - no need for an extra init.d for this
* dirty_ratio, dirty_writeback_interval, dirty_expire_interval and dirty_background_ratio tweaked on the source - no need for an extra init.d for this
* And more minor tweaks and optimizations for extra stability
04 October release 2:
* Works with the new CWM 5.0.2.3 from stockwell - thank you man
04 October release:
* Voltage table fixed for maximum stability
* Add Lazy governor from Ezekeel for testing
* Minmax governor is the default for extra stability
* Tweaked Simple I/O scheduler and set it as default again
* Kernel image is bigger because I changed compression algorithm and now it should boot faster
* The normal minor fixing and tweaking
29 September release:
* Hot reboots fixed
* Video decoder and encoder should be fixed too
29 September release:
* Frequency table re-written. Now the CPU frequencies go from 400 to 1800 in 100 increments (400,500,600,700 etc) (thanks dzo for teaching me how the cpu calculations are made)
* Governors updated according the new CPU values. This is where the boost comes from. Now scaling up and down should be a fast and smoother process for the governors
* Voltages reviewed as well for increased battery and stability
* Bit of a cleanup of the video core and kgsl drivers (from stockwell)
* Default speeds are 1000 max and 400 min - smartass2 governor
* Some minor fixes
24 September release:
* Add ability to control vdd from sysfs (more info: http://forum.xda-developers.com/showthread.php?t=821372) (thanks stockwell)
* Remove SavagedZen and brazilianwax governors because they became obsolete
* Touchscreen dup filter enabled by default
* Default max frequency updated to be according to the CPU table - 1024000 now
* A little tune to interactiveX
* Logcat module added to the download section
* Add my ram optimization script to the download section
23 September release:
* Photo shoots are faster
* New frequencies to choose from
* 245 frequency disabled because it does more harm than good
* Fixed some undervolting values to give some extra stability. 1,8ghz should be more stable to use again
* TinyRCU optimized
* And a lot of small fixes, tweaks - the list is too big to write here, everything is in my github
17 September release:
* New undervolting values - should save more battery. Thanks fabryxy for some of the values ideas
16 September release:
* 720p codec changed to H.264 (not 100% sure I changed it)
* Latest mic patch by ksatta
* Undervolting from 1,2ghz to 122mhz - should increase battery life
* Backlight level min from 30 to 15
* Latest patches from dzo
* Small fixes and improvements here and there - can be seem in my github
11 September release:
* Smartass2 values tweaked to be more battery friendly while maintaining it's performance
* Updated vibration code from Stockwell
* ksatta's mod included
* ZRAM is gone for good. Don't worry if you flashed the module before, doesn't do **** now
* Big patch to improve overall system responsiveness and smoothness from ck kolivas. Big improvements from this one
* ext3/ext4 patches again
* Tcp/network patches and tweaks
* Small power management patch from CAF
* Kernel is way more light and should save even more battery
* Compatible with CM7 from geno
* BFQ I/O scheduler is now the default for testing purposes
* Logcat disabled for some extra battery and performance juice. I'll release a module later for devs
* Some other small tweaks that are on my github and are not worth mentioning here
31 August release:
* NOT COMPATIBLE WITH CM UNTIL GENO UPDATES HIS ROM WITH THE NEW INITRD
* Smartass2: A few small tweaks and bug fixes
* Reverted compiling flags change. The flags I used for the last version wasn't that good and actually gave me some worse battery life
* lib/sha1: use the git implementation of SHA-1
* arm: remove "optimized" SHA1 routines
* PM: Back off suspend if repeated attempts fail
30 August release:
* NOT COMPATIBLE WITH CM UNTIL GENO UPDATES HIS ROM WITH THE NEW INITRD
* Add Smartass2 from the original Smartass creator
* Battery friendly tweaks
* Latest acpuclock-7x30.c from CAF (dzo)
* TinyRCU default again
* VM_READAHEAD lowered to 512 from 4096. This should fix the random music stutter
* Fix for the doubled boot image
* Disabled more debug ****
* Various memory bugfixes and tweaks
* More stable and faster
23 August release:
* Now compatible with all the 2.3 roms. Stockwell changed anyKernel package and now it's boot.img independant. Means that if the rom makers release updates this kernel can still be applied without breaking the boot.img/ramdisk. Thanks Stockwell
* Compiled with an older toolchain for extra stability
* Merged latest patches from dzo
* Added ondemand from the 3.0 kernel and now it has built-in profiles. Means that it caps at X speed while screen is off
* Minmax tweaked to give a little extra performance
* Internet/data speed was major improved by changing the TCP Congestion scheduler to a better one. It's very noticable
* Disabled some legacy drivers ****, including ethernet drivers that we obviously don't use
* Reverted ext3/ext4 updated code commit. It caused some strange behavior to certain users
* Maybe one or other thing that I'm forgetting
17 August release:
* Merged the latest patches from dzo
* CFS scheduler updates
* Ipv4 code tweaks (internet usage should be faster now)
* VFP code cleanup and changes
* Some battery improvement code
* A lot more stuff that you can see in my github
04 August release:
* Add Jhash 3
* Add ZRAM
* Add dzo patches (thanks once more)
* Add few more optimization flags
* Compiled with the most recent gcc 4.6.1 toolchain from Linaro
* Add haptic feedback code from dzo (thanks)
* Only MIUI and Oxygen kernel update. The changes I did won't work on void for the most part I think
20 July release:
* Classic RCU added and default
* Simple I/O scheduler by default
* More battery patches from dzo, thank you!
* A lot of other improvements that can be seen in my github
* TinyRCU
* A lot of tweaks for the KGSL drivers
* 4 new governors with values specifically tweaked for this phone: SavagedZen, InteractiveX, Minmax and Scary
* Smoothass slightly updated and Interactive major rewrite
* CFS tweaks
* I/O improvements
* CPU unaligned access for extra performance
* Kernel compiled with flags specific for this CPU to get the most out of it
* Readahead values increased to 4096 max 32 min
* Ashmem, Shmem, lowmemorykiller, binder.c, pmem.c and timed_gpio.c backported from the .35 kernel
* Framebuffer memory file largely updated from .39 kernel
* Cleancache added and enabled
* Optimized RWSEM algorithm
* Compaction memory added
* SFB network packet scheduler
* XZ kernel compression support by default
* Latest kernel patches from dzo (from battery saving to an improved touchscreen driver)
* Enabled userspace access to the L2 PLE
* Many many more patches that can be seen in my github
MIUI, Oxygen and CM7: http://www.multiupload.com/8HXGGJ9WJC
Please do a backup before trying these kernels. Even if it works fine for me doesn't mean it works for everyone.
This has given me a lot of work, so please enjoy and take full advantage of this power kernel.
Sources: https://github.com/franciscofranco/u8800-kernel
Great!
Is this dzo's patch included in this kernel: http://forum.xda-developers.com/showpost.php?p=15593863&postcount=75?
Thanks for this franciscofranco!
Will update later
Great work!!
The screen seems more responsive now and it looks even faster!! #void
Congratulations to both of you!
franciscofranco plz have a look at that topic and see if you can come up with something
Just to clarify, this is 2.2.2 modified?
Good work，i'll test it
Sorry for my noob question: we just flash normally or update.zip?
great job
i flash your new kernel,and i feel more smoother than before
randomparanoia said:
Sorry for my noob question: we just flash normally or update.zip?
Click to expand...
Click to collapse
May i ask same question? Thank you for your reply.
PS: I use FBL rom, details are here
I just flashed it normally... so I suppose its the way to do it, since phone its still working ;p
Will this work on B137 Stock ROM (v2.2.2 original from Huawei)?
I have a "black sheep" X5 (see ClockWorkMod v4 topic) and I can't install any Custom ROM.
randomparanoia said:
I just flashed it normally... so I suppose its the way to do it, since phone its still working ;p
Click to expand...
Click to collapse
Yep, that's the correct way. If you check kernel info, you'll see some new characters - > "#1".
I'm not sure how to flash it correctly since im new to this.
Do i just install zip from sdcard in clockwork? Do i need to wipe any caches?
Can't we just extract and just replace BOOT.img? (without going through recovery) - may be a noob question but I'm hoping to learn something...
I don't know lourenzo. I had the same doubt before so I just intalled via CWM.
Thanks for your work.
The touchscreen obviously become better, but when I open the browser and drag the screen slowly or just touch the screen, the screen become slightly flickering, anyone has the same problem ?
lourenzo said:
Can't we just extract and just replace BOOT.img? (without going through recovery) - may be a noob question but I'm hoping to learn something...
Click to expand...
Click to collapse
Yes you can, the zip is only made to simplify the process
i just installed this over stockwells' OC kernel. Touchpal keeps force-closing and other than that i cannot see any other differences, i know that it is my fault but what have i done wrong?
lancexxiii said:
i just installed this over stockwells' OC kernel. Touchpal keeps force-closing and other than that i cannot see any other differences, i know that it is my fault but what have i done wrong?
Click to expand...
Click to collapse
Which ROM are you using? Just in case the kernels are optimized for corresponding ROMs (void, MIUI, Oxygen).
After flashing the KERNEL of miui, why the camera can't work normally
please correct it
Development halted due to vast(believe me) amount of resizing needed.
Hello everyone.
Im currently porting peso for wildfire
http://forum.xda-developers.com/showthread.php?t=1588529
Any experienced dev should pl help me complete this project.
Currently its developed not booting stuck on splash screen.
Note I followed peteragents tut.
Need some help and tools to unpack kernel.
Jordfaz,slymobi,wasim,etc and all other porters pl help.
Ill attach a logcat whenever I flash it again.
Thank you.
Nice to hear that there is development going on. I thought wildfire android development was dead.
Nokia 3310 coming ^_^
current device: htc wildfire
Wildfire has gr8 potential though it lacks gpu.:thumbup:
Take cm7 and do this :
Old Changelogs:
Version 1.4 - 2.2 - 3/6/2012
* Updated CM Sources to cm-7-20120305-NIGHTLY
* Prebuilt PerfectPeso Kernel! (based from ta-gb)
* Supercharged
* Removed zipalign (it's useless)
* Removed some build.prop tweaks
* Updated Framework and SystemUI (some cosmetic changes from MetroStar)
* Removed some useless scripts and binaries
* Removed transparency on menus (faster!)
* Replaced stock camera with lgcamera
* Added MX Video Player by default
* Updated SU APK and BIN
* Updated Gralloc Modules
* Increased windowsmgr workload
* Added Battery Calibration Tweak
* Fixed Text Color on some Dialog boxes
* Fixed music stutter
* Added some sysctl tweaks
* System is now smoother!
* Updated Contacts.apk
* Rearranged Tweaks by priority
* Updated KAK, Supercharger, and 3G Scripts
* New Script Execution method
* Fixed Thunderbolt script to prevent double mounting of noatime and nodiratime
* Removed some Prime Tweaks
* Added Compatibility to some apps such as Apparatus
* Resized Status Bar Icons (Better Quality!)
* Fixed Lockscreen Icons
* Resized UI Fonts!
* New Dividers
* Added Lagfree Tweaks
* Added Rome Tweaks
* Updated Kernel to v1.1
* Smartass Governor by default
* Added some text when flashing the rom to know the details of the progress
* Added TweakZv4
* Added SickTweaks
* Added some Camera Tweaks
* Optimized I/O Operations
* Added cleaner Tweak
* Faster 3G and Wifi
* Restored Maximus Tweaks aka Thunderbolt
* Added Lightning Zap Tweak
* Updated DalvikVM to ICS
* Updated Google Music to v4.1.512
* Fixed Phone.apk ICS Notification Layout
* Downgraded SuperCharger
* Updated Root Browser
* Updated Rom Manager
Version 1.3 - 12/31/2012
* Fixed Phone.apk Calling FC bug
* Updated some apk's to Nightly #16
* Removed Camera Tweaks
* Calendar Visuals fixed
Version 1.2 - 12/29/2012
* Fixed Terminal Emulator Bug
* S2E Now Workzzz!
* Removed Maximus Script
* Integrated Supercharger
* Auto fix permissions every boot!!
* Automatic ICS Layout Patching
* New scripts and tweaks from franco
* Added ramscript for better RAM Performance
* Fixed baseband bug on old baseband
* Removed WiFix because Wifi needs to be pressed two times to enable
* Removed LG bootanimation
* Used ta-gb by thachtunganh kernel on New Baseband .35
* Used old bootanimation
* Restored Old volume bars/progress bars
* Removed Media Scanner Disabler
* Added sysctl tweak and script
* Downgraded Root Browser to support Root Permissions
* Updated Calculator to Xperia Calculator
* Fixed unreadable text in MMS in black background mode
* Replaced Xperia Keyboard with PerfectKeyboard
* Added Xperia Timer Widget
* Added Xperia Media Widget
* Restored old camera
* Revamped Launcher
* Disintegrated Market from Extended Version
* Removed useless development scripts and binaries
* Updated Host file
* Smaller Xperia Digital Clock Widget
* Updated Google Music to 4.1.512
* Fixed Phone.apk Visuals bug (when calling)
* Removed EXT4 Tweaks
* Removed laggy Xperia Arc theme
* Added an empty local.prop file for supercharger
* Updated NBB Edition to nighly 15 (not nightly 16  for some reason)
* Updated OBB editions in to nighly 15 camera
Version 1.1a - 12/24/2012
* CMParts force close fix (when choosing a brightness setting)
* Updated Maximus Script
* New Bootanimation
* New Miui Camera
* Smoother Scrolling!
Version 1.1 - 12/23/2012
* Based on CyanogenMod 7.2-A8
* Replaced APK's with CM7.2 APK's
* Faster Accelerometer
* Revamped ICS Statusbar Layout and Icons
* Updated Music App to v4.15
* Added WaveRecorder
* Added LunarUi, ICS and Xperia Themes
* Replaced stock kernel to franco.Kernel-gbs.v20a-gamer.zip
* Updated camera libs
* Disabled offline charging
* Added a patch to remove the line below the status bar (Partially)
* Updated ICS and LunarUI Sources
* Removed CFS Tweak because it sucks
* Updated Progress Bars and Seek Bars
* Fix and Themed Contacts and Dialer
* Replaced Stock Keyboard with Xperia Keyboard
* Revamped Camera and Browser
* Added Deskclock fix
* Updated Deskclock font and resources
* New bootanimation
* Added MarketApp as stock (Only on Extended Version)
* Added Digital Clock and Photo widget
* Text Messages are now readable 
Version 1.0 - 1/18/2012
* Initial release
===================================================================
Application recommendations for optimal use of this ROM:
App2SD: INTERACTIVE DATA2SD
Music Player: PowerAMP
Widgets: Colorize Widget
Camera: lgCamera
Dialer: exDialer
Keyboard: SmartKeyboard PRO or DA Swypes
Messaging App: Handcent(slower than stock but it's better)
Sent from my HTC Wildfire using xda premium
gobz said:
Wildfire has gr8 potential though it lacks gpu.:thumbup:
Click to expand...
Click to collapse
Gpu as well as processor. But its a great way to enter into Android world. The most older phone you have, the more you have the knowledge of the best things around.
Nokia 3310 coming ^_^
current device: htc wildfire
Pator57 said:
Take cm7 and do this :
Old Changelogs:
Version 1.4 - 2.2 - 3/6/2012
* Updated CM Sources to cm-7-20120305-NIGHTLY
* Prebuilt PerfectPeso Kernel! (based from ta-gb)
* Supercharged
* Removed zipalign (it's useless)
* Removed some build.prop tweaks
* Updated Framework and SystemUI (some cosmetic changes from MetroStar)
* Removed some useless scripts and binaries
* Removed transparency on menus (faster!)
* Replaced stock camera with lgcamera
* Added MX Video Player by default
* Updated SU APK and BIN
* Updated Gralloc Modules
* Increased windowsmgr workload
* Added Battery Calibration Tweak
* Fixed Text Color on some Dialog boxes
* Fixed music stutter
* Added some sysctl tweaks
* System is now smoother!
* Updated Contacts.apk
* Rearranged Tweaks by priority
* Updated KAK, Supercharger, and 3G Scripts
* New Script Execution method
* Fixed Thunderbolt script to prevent double mounting of noatime and nodiratime
* Removed some Prime Tweaks
* Added Compatibility to some apps such as Apparatus
* Resized Status Bar Icons (Better Quality!)
* Fixed Lockscreen Icons
* Resized UI Fonts!
* New Dividers
* Added Lagfree Tweaks
* Added Rome Tweaks
* Updated Kernel to v1.1
* Smartass Governor by default
* Added some text when flashing the rom to know the details of the progress
* Added TweakZv4
* Added SickTweaks
* Added some Camera Tweaks
* Optimized I/O Operations
* Added cleaner Tweak
* Faster 3G and Wifi
* Restored Maximus Tweaks aka Thunderbolt
* Added Lightning Zap Tweak
* Updated DalvikVM to ICS
* Updated Google Music to v4.1.512
* Fixed Phone.apk ICS Notification Layout
* Downgraded SuperCharger
* Updated Root Browser
* Updated Rom Manager
Version 1.3 - 12/31/2012
* Fixed Phone.apk Calling FC bug
* Updated some apk's to Nightly #16
* Removed Camera Tweaks
* Calendar Visuals fixed
Version 1.2 - 12/29/2012
* Fixed Terminal Emulator Bug
* S2E Now Workzzz!
* Removed Maximus Script
* Integrated Supercharger
* Auto fix permissions every boot!!
* Automatic ICS Layout Patching
* New scripts and tweaks from franco
* Added ramscript for better RAM Performance
* Fixed baseband bug on old baseband
* Removed WiFix because Wifi needs to be pressed two times to enable
* Removed LG bootanimation
* Used ta-gb by thachtunganh kernel on New Baseband .35
* Used old bootanimation
* Restored Old volume bars/progress bars
* Removed Media Scanner Disabler
* Added sysctl tweak and script
* Downgraded Root Browser to support Root Permissions
* Updated Calculator to Xperia Calculator
* Fixed unreadable text in MMS in black background mode
* Replaced Xperia Keyboard with PerfectKeyboard
* Added Xperia Timer Widget
* Added Xperia Media Widget
* Restored old camera
* Revamped Launcher
* Disintegrated Market from Extended Version
* Removed useless development scripts and binaries
* Updated Host file
* Smaller Xperia Digital Clock Widget
* Updated Google Music to 4.1.512
* Fixed Phone.apk Visuals bug (when calling)
* Removed EXT4 Tweaks
* Removed laggy Xperia Arc theme
* Added an empty local.prop file for supercharger
* Updated NBB Edition to nighly 15 (not nightly 16  for some reason)
* Updated OBB editions in to nighly 15 camera
Version 1.1a - 12/24/2012
* CMParts force close fix (when choosing a brightness setting)
* Updated Maximus Script
* New Bootanimation
* New Miui Camera
* Smoother Scrolling!
Version 1.1 - 12/23/2012
* Based on CyanogenMod 7.2-A8
* Replaced APK's with CM7.2 APK's
* Faster Accelerometer
* Revamped ICS Statusbar Layout and Icons
* Updated Music App to v4.15
* Added WaveRecorder
* Added LunarUi, ICS and Xperia Themes
* Replaced stock kernel to franco.Kernel-gbs.v20a-gamer.zip
* Updated camera libs
* Disabled offline charging
* Added a patch to remove the line below the status bar (Partially)
* Updated ICS and LunarUI Sources
* Removed CFS Tweak because it sucks
* Updated Progress Bars and Seek Bars
* Fix and Themed Contacts and Dialer
* Replaced Stock Keyboard with Xperia Keyboard
* Revamped Camera and Browser
* Added Deskclock fix
* Updated Deskclock font and resources
* New bootanimation
* Added MarketApp as stock (Only on Extended Version)
* Added Digital Clock and Photo widget
* Text Messages are now readable 
Version 1.0 - 1/18/2012
* Initial release
===================================================================
Application recommendations for optimal use of this ROM:
App2SD: INTERACTIVE DATA2SD
Music Player: PowerAMP
Widgets: Colorize Widget
Camera: lgCamera
Dialer: exDialer
Keyboard: SmartKeyboard PRO or DA Swypes
Messaging App: Handcent(slower than stock but it's better)
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
Im sorry but I dont understand what you are saying.
I think some libs fixes and it would get working.
gobz said:
Im sorry but I dont understand what you are saying.
I think some libs fixes and it would get working.
Click to expand...
Click to collapse
I mean, if you can't port this rom, you can make a new one with the same freature and interface as this rom.If you still don't understand :sly:, sory i don't know how to say it.There is an tuto to port cm7 based rom on xda search it and you will make easily an port of that rom.
Sent from my HTC Wildfire using xda premium
Pator57 said:
I mean, if you can't port this rom, you can make a new one with the same freature and interface as this rom.If you still don't understand :sly:, sory i don't know how to say it.There is an tuto to port cm7 based rom on xda search it and you will make easily an port of that rom.
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
Oh I got u. Cheers
Try to port from here insted,http://forum.xda-developers.com/showthread.php?p=22702716 .
Because even if you get it to work then you'll need to resize some stuff(maybe).
I'll try to help you as much as possible,just leave me a PM.
Wasimk32 said:
Try to port from here insted,http://forum.xda-developers.com/showthread.php?p=22702716 .
Because even if you get it to work then you'll need to resize some stuff(maybe).
I'll try to help you as much as possible,just leave me a PM.
Click to expand...
Click to collapse
If u can download the p500 zip I ll tell u where Im stuck.
P500 has ldpi res same as buzz so why do I have to resize?
gobz said:
If u can download the p500 zip I ll tell u where Im stuck.
P500 has ldpi res same as buzz so why do I have to resize?
Click to expand...
Click to collapse
P500 is an MDPI device as far as I know,anyways,I'll give this a shot tonight.
But,honestly I dont see anything unique in this rom.
Wasimk32 said:
P500 is an MDPI device as far as I know,anyways,I'll give this a shot tonight.
But,honestly I dont see anything unique in this rom.
Click to expand...
Click to collapse
Yes sorry it is MDPI
A stupid forum said it was ldpi.
No development here on.
Ill just keep the half ported version and complete it later.
gobz said:
Yes sorry it is MDPI
A stupid forum said it was ldpi.
No development here on.
Ill just keep the half ported version and complete it later.
Click to expand...
Click to collapse
If you want rom with ICS feel on GB then you must give this a shot.(needs to be a bit optimized though)
Originally Posted by gobz<br />
Yes sorry it is MDPI<br />
A stupid forum said it was ldpi.<br />
No development here on.<br />
Ill just keep the half ported version and complete it later.
Click to expand...
Click to collapse
<br />
<br />
If you want rom with ICS feel on GB then you must give this a shot.(needs to be a bit optimized though)
Click to expand...
Click to collapse
Ty.
Anyway I switched back to sense rom.
Do you know any modifications for sense?
Like quick toggle??
'BAZINGA!'
gobz said:
Ty.
Anyway I switched back to sense rom.
Do you know any modifications for sense?
Like quick toggle??
'BAZINGA!'
Click to expand...
Click to collapse
Yup,there are two very nice apps to have toggles in notification dropdown.
1.1Tap Quick Bar
2.Notification toggle.
Wasimk32 said:
Yup,there are two very nice apps to have toggles in notification dropdown.
1.1Tap Quick Bar
2.Notification toggle.
Click to expand...
Click to collapse
Nothing inbuilt?
Ported from higher devices?
gobz said:
Nothing inbuilt?
Ported from higher devices?
Click to expand...
Click to collapse
That will be available in sense 2.1 or higher,we have a sense 2.1 ROM but again things like bluetooth and wifi don't work with them.
So that's all inbuilt we have.
crDroid
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on CyanogenMod so use custom kernels compatible with them!
A special thanks to @Bitti09 for trees and @Gnome for kernel. The ROM wouldn't have been possible without them.
Features:
* Volume panel timeout
* Slim recents panel
* Clear recents location
* Heads up customization
- Quick access button on expanded status bar
- Swipe behavior
- Touch outside behavior
- Time out
- Do not disturb
- Blacklist
* SlimRoms custom lockscreen shortcuts
* Navbar on/off
* Hardare keys on/off (in devices supported)
* Power menu in navring targets
* SlimPie controls with all working
* Sound panel option om power menu
* Superuser indicator (Notification, Statusbar icon or no indicator)
* Force expanded notifications on expanded statusbar
* Power menu and notifications tiles
* Four tiles per row
* Vibrate on tiles touch
* Disable quick settings on secure lockscreen
* Kill app back button configurable timeout
* Ambient display as active display from OmniRom
* ADBlocker
* IME advanced settings
* SELinux switch
PS: All CyanogenMod features also inside
Instructions:
- Make sure you're running a proper working Recovery (CWM or TWRP)
- Copy GApps and crDroid zip to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Flash GApps zip
- Flash SuperSU (not mandatory. We have CyanogenMod su access inside)
- DO A DATA WIPE / FACTORY RESET
- Reboot
Upgrading from earlier version of crDroid:
- Copy crDroid ZIP to your internal SDCard
- Boot into Recovery
- Flash crDroid zip
- Reboot
XDA:DevDB Information
crDroid, ROM for the Xiaomi Mi 3
Contributors
sud.vastav, TechExhibeo, Cristiano Matos
Source Code: https://github.com/crdroidandroid
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Created 2015-07-05
Last Updated 2015-09-04
Credits and Links:
Credits:
*@Bitti09 for trees and @Gnome for his kernel. The ROM wouldn't have been possible without them.
*@TechExhibeo, @Men_in_black007, @Saatvik Shukla and @Vatsal for always being available to help me out.
* @Shahan_mik3 and @Cancro90 for testing.
Downloads:
20150903: crdroid-5.1.1-20150903-cancro.zip
20150813: crdroid-5.1.1-20150813-cancro.zip
20150721: crdroid-5.1.1-20150720-cancro.zip
20150712: crdroid-5.1.1-20150712-cancro.zip
20150704: crdroid-5.1.1-20150704-cancro.zip
crDroid Links!
*Screenshots:
*Google+ Community
Nice work dude
wohh wohh thanks buddy , heard a lot about it in the telegram group , now can have my hands on it
mind sharing:
1) sod?
2) hdr cam?
3) compass?
4) fc crashes?
crdroid my favorite rom on my moto g
Thanks for the ROM
Tried for 1 hour Everything worked fine with initial boot , during reboot "No Sim Error" and Camera FC happened.
Had to power down and restart to get the network.
-WiFi : all gud
-2g/3g works fine
-camera hdr bug is still present
-Call bugs : no call sod as f now..made some 6-7 calls each f around 10 minz..
-smooth rom..
-no fc yet
-battery sometimes drops too quick sometimes..
sometimes takes so much time just to drop a single percent..
overall can b used as daily driver..
Smooth and fast rom wid extra good settings, still faced some bugs till now - hdr mode not working, battery is draining little faster, no sod nd fc yet. Stil under observation, will update soon.
Nice rom, feature full. Any plans to make it official? Or any latest release?
Update!
Update!
crDroid 20150712
Grab it here: crdroid-5.1.1-20150712-cancro.zip
Credits: @Cancro90 and @Shahan_mik3 for testing.
sud.vastav said:
Update!
crDroid 20150712
Grab it here: crdroid-5.1.1-20150712-cancro.zip
Credits: @Cancro90 and @Shahan_mik3 for testing.
Click to expand...
Click to collapse
Changelog bro?
Cheers
rajib4 said:
Changelog bro?
Cheers
Click to expand...
Click to collapse
No changes in the device part, just latest crDroid updates.
Flash it and get to know it yourself
sud.vastav said:
No changes in the device part, just latest. crDroid updates.
Flash it and get to know it yourself
Click to expand...
Click to collapse
Mate any plans to go official? because this is an awesome ROM.
sud.vastav said:
No changes in the device part, just latest. crDroid updates.
Flash it and get to know it yourself
Click to expand...
Click to collapse
Same old question from me... Will this work on stock partition?
FM Radio works on this rom?
No, its didn't work. But u can replace the FM app from the system.
so what works and what doesnt?
what is buggy atm?
@sud.vastav I can test the test builds if you want. I am not in the Hangouts group- so u can PM me
Update!
Update!
crDroid 20150720
Grab it here: crdroid-5.1.1-20150720-cancro.zip
Credits: @Cancro90 and @debasish497 for testing.
DISCLAIMER
Code:
[B][SIZE="3"]Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Please read completely this thread before using for minimize FAQ.
If you coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flash this!
[/SIZE][/B]
Requirements
BACKUP your Boot.img and ROM Before flash this Kernel.
Unlock Bootloader as well
atleast on Firmware v27, check here
Latest TWRP
No need Wipe dalvik/art cache
Features
On version 4.1
Using Official XIAOMI Patch.
Support MIUI/AOSP (Nougat/Oreo)
Kernel based on CAF "LA.UM.6.6.r1-09000-89xx.0" (Oreo)
Kernel based on CAF LA.UM.6.6.r1-06300-89xx.0 (MIUI/AOSP N)
Wlan prima CAF "LA.UM.6.6.r1-09000-89xx.0" (Oreo)
Wlan prima CAF LA.UM.5.6.r1-07900-89xx.0 (MIUI/AOSP N)
Video En/Decode CAF LA.UM.5.6.r1-06900-89xx.0 (MIUI/AOSP N)
Camera Stack CAF LA.UM.5.6.r1-06300-89xx.0 (MIUI/AOSP N)
IPA Tethering CAF LA.UM.5.6.r1-06900-89xx.0 (MIUI)
Compiled with AOSP Toolchain 4.9.
support Doubletap2Wake / Sweep2Wake Gesture.
KCAL colour control & Backlight Dimmer
Xiaomi Color & Contrast patch (Needed by MIUI).
Unlock GPU clock from 475MHz to 500MHz.
added latest alucard, nightmare, darkness, clarity, blue active cpu Governors.
added Usb force fastcharge (Disabled by default | Please read Disclaimer again)
added BFQ-v8r12, Fiops, Maple, Zen, SIO i/o scheduler (CFQ as Default).
set default compression zram to Lz4.
Support and updated F2FS Filesystem (AOSP)
added custom hotplug AutoSMP and AIO (default core control by CAF)
added ExFat and NTFS Filesystem support
added sound control
added dts eagle sound integration
added boeffla wakelock blocker
added TTL target Support
More
Telegram Channel for Beta version
https://t.me/claritykernel
FAQ & Changelogs
FAQ
CHANGELOGS
Little Story
Now using official Xiaomi Patch for Redmi 4X
this kernel is nothing without Noyer, first many thanks and credits goes to him and this is his source : msm-3.18
My source is little different with Noyer source, while i'm using CAF tag release.
but this kernel can't be done without Noyer commits in git, i'm still learn to make this kernel more stable with a lots of features.
Bugs ?
Nothing.
Report with dmesg and last_kmsg if founded.
Credits
(Not in order)
Eduardo Noyer a.k.a bitrvmpd
silent27121984 | Nikit | Nik001 (All dev bring Oreo Rom)
Savoca | Francisco Franco | Alucard24 | Showp1984 | SultanXDA
Nichream | TheScarastic | Flar2 | Nathanchance | Andip71 | Msf-jarvis
joshuous | LazerL0rd | LuanHalaiko | LuizPauloDamaceno | mostafa-z
All authors and commiters on Source
Tell me if i miss someone else
How to enable dt2w/s2w
Download Kernel Adiutor at Playstore.
Open Kernel Adiutor (KA).
KA > Wake > doubletap2wake : Full/Half
KA > Wake > sweep2wake : Sweep2wake + Sweep2sleep
sweep2sleep not working
How to costumize/enhance AutoSMP hotplug (04042018)
Check Here > https://forum.xda-developers.com/showpost.php?p=76082937&postcount=1116
Donations
i spend some hours to build this kernel. if you like my work you can buy me a coffee :laugh:
Donate Me || OR || Donate Noyer (bitrvmpd)
Downloads
Google Drive
If you having issue on tethering or wifi on Nougat/Miui roms, check this
XDA:DevDB Information
Clarity, Kernel for the Xiaomi Redmi 4X
Contributors
rainforce279, b1tRvmpd
Source Code: https://github.com/ryan-andri/android_kernel_santoni
Kernel Special Features: as mentioned on features.
Version Information
Status: Stable
Current Stable Version: 4.1
Stable Release Date: 2018-07-23
Created 2017-12-14
Last Updated 2018-07-23
How to report bugs & F.A.Q
How to report bugs
For easy steps to report bugs.
You should report bugs with format:
Rom information
Android version
Version of this kernel
Any setting that you have done after flash this kernel
log: logcat and dmesg if you encounter drivers problem.
log: last_kmsg if you encounter random reboot.
Take logs with Kernel Adiutor (KA):
Download Kernel Adiutor (KA) on Playstore!
Open KA > Settings > search: "Debugging section" > click on dmesg/last_kmsg/dmesg. Then open any file manager locate to storage/emulated/0 or internal storage, the file logs formated with .txt then send it to this thread or PM me.
Reporting bugs with properly way, you not only help me but you help your self too. If any reports bugs or problem without this preference, i'll ignore it!
Frequently asked questions (FAQ)
Q : My touchscreen is not work after flashing this kernel, what should i do ?
A : Go to this thread Firmware and flash v27 firmware, your touchscreen will work again.
Q : This is will work for MIUI rom ?
A : works fine now.
Q : Can you add x or y features ?
A : i'll accept all usefull feature. i think enough for now.
Q : Wifi not work after restore stock boot.img, what should i do ?
A : after restore stock kernel or boot.img and wifi doesn't work you can open any file manager and locate to system/lib/modules and remove wlan.ko then locate to system/lib/modules/pronto copy pronto_wlan.ko into system/lib/modules and rename it as wlan.ko then set permission to 0644, your wifi will work again. (In case for MIUI)!
Changelogs
Changelogs AOSP 8.1 or AOSP 8.1 Treble
Code:
[COLOR="Red"]v4.1[/COLOR]
For detail logs, check source on branch "Oreo" Please.
- Disable kernel debugs
- Improve for disabled tracer (less debugs)
- enable specific config to improve zram performance
- simplify checking thermal state for custom hotplug
- add bootinfo from riva-n-oss
- decreased bcl (battery current limit) threshold to 5%
Changelogs MIUI 9/10
Code:
[COLOR="Red"]v4.1[/COLOR]
For detail logs, check source on branch "Nougat/MIUI" Please.
- Improve for disabled tracer (less debugs)
- enable specific config to improve zram performance
- simplify checking thermal state for custom hotplug
- add bootinfo from riva-n-oss
- lots caf commits for improve stabilty
- decreased bcl (battery current limit) threshold to 5%
- upstream ipa tethering from latest CAF
Changelogs AOSP 7.1
Code:
[COLOR="Red"]v4.1[/COLOR]
For detail logs, check source on branch "Nougat/AOSP" Please.
- Improve for disabled tracer (less debugs)
- enable specific config to improve zram performance
- simplify checking thermal state for custom hotplug
- add bootinfo from riva-n-oss
- lots caf commits for improve stabilty
- decreased bcl (battery current limit) threshold to 5%
Thanks for sharing.
link please..
rainforce279 said:
DISCLAIMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
==================================================
Please read completely this thread before using for minimize FAQ
If you coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flash this!
Requirement
Unlock Bootloader as well
Latest TWRP
atleast on AOSP Based ROM (LOS, AEX, RR, etc).
No need Wipe dalvik/art cache
Features
Based on CAF TAG "LA.UM.5.6.r1-06400-89xx.0"
Upstream to Linux 3.18.87
Compiled with Linaro Toolchain 4.9.4
Compiled with -O2 Flag.
Wlan Prima based on CAF TAG "LA.UM.5.6.r1-06400-89xx.0"
KCAL colour control.
added Zen, BFQ i/o scheduler (BFQ as Default).
enabled "BFQ hierarchical scheduling support"
Customeable MSM Thermal.
Added Boeffla Wakelock blocker.
optimized crypto crc32 for arm64
Set default compression zram to Lz4.
many more.
Status
This kernel is very high experimental due the source is from ported.
Boot = OK.
Sound, speaker, earphone, mic = OK.
Camera [front/back] = OK.
Fingerprint =OK.
Touchscreen = OK.
IR Blast = Not testing yet.
WIFI = OK.
RIL = OK.
Radio = OK.
BUGS ?
So far, i'm never facing any problem.
tell me if you found it.
CREDITS ?
Eduardo Noyer a.k.a bitrvmpd
Nicecream
TheScarastic
XDA:DevDB Information
Clarity, Kernel for the Xiaomi Redmi 4X
Contributors
rainforce279
Source Code:https://github.com/ryan-andri/android_kernel_santoni
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2017-12-15
Created 2017-12-14
Last Updated 2017-12-14
Click to expand...
Click to collapse
where is the link
Good work (Y)
Sent from my Redmi 4X using Tapatalk
You are good man!
Diantos om
Sent from my Redmi 4X using Tapatalk
Report sir.
Touch screen and finger print did not work after flash this kernel.
Tested On Aosp Extend 4.6.
Any solution?
Randyshare said:
Report sir.
Touch screen and finger print did not work after flash this kernel.
Tested On Aosp Extend 4.6.
Any solution?
Click to expand...
Click to collapse
try flash firmware v27
rainforce279 said:
try flash firmware v27
Click to expand...
Click to collapse
OK sir.
Downloading fw 27 .
BTW, is this kernel have a fast charger feature?
IR working and all working fine here
:good:
Sent from my Redmi 4X using Tapatalk
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
Add fast charge and Alucard if possible please
Sent from my Redmi 4X using Tapatalk
Yousef Algadri said:
IR working and all working fine here
:good:
Sent from my Redmi 4X using Tapatalk
---------- Post added at 05:57 PM ---------- Previous post was at 05:56 PM ----------
Add fast charge and Alucard if possible please
Sent from my Redmi 4X using Tapatalk
Click to expand...
Click to collapse
Nice hear that, thanks man.
Salam kenal dari palembang om
@rainforce279 come join in telegram group @redmi4official
After flash FW 027, Touchscreen work.
But now , fingerprint was broken.
Also missing this option in setting.
Pls help..
Here is it..
Randyshare said:
After flash FW 027, Touchscreen work.
But now , fingerprint was broken.
Also missing this option in setting.
Pls help..
Click to expand...
Click to collapse
what your rom now, try reboot your device
i never facing this problem so far.
rainforce279 said:
what your rom now, try reboot your device
i never facing this problem so far.
Click to expand...
Click to collapse
I'm on Aosp extend 4.6 sir.
OK, I will try restart.
.............
Done.
It does not help sir.
.....
Charging indicator isn't work on status bar.
Pls fix.
.....
Nice work btw
I'm on dot os 1.1 and wifi, fingerprint isnt working here. Tried rebooting device but still no success.
rainforce279 said:
Nice hear that, thanks man.
Salam kenal dari palembang om
Click to expand...
Click to collapse
Salam kenal dari Jakarta juga [emoji85]
Sent from my Redmi 4X using Tapatalk
rainforce279 said:
DISCLAIMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
==================================================
Please read completely this thread before using for minimize FAQ
If you coming from other custom kernel, please restore to stock boot.img or dirty flash your rom before flash this!
Requirement
Unlock Bootloader as well
atleast on Firmware v27, check here
Latest TWRP
atleast on AOSP Based ROM (LOS, AEX, RR, etc).
No need Wipe dalvik/art cache
Features
Based on CAF TAG "LA.UM.5.6.r1-06400-89xx.0"
Upstream to Linux 3.18.87
Using Reversed dtb from Stable MIUI 9.1.1.0.
Compiled with Linaro Toolchain 4.9.4
Compiled with -O2 Flag.
Wlan Prima based on CAF TAG "LA.UM.5.6.r1-06400-89xx.0"
KCAL colour control.
added Zen, BFQ i/o scheduler (BFQ as Default).
enabled "BFQ hierarchical scheduling support"
Customeable MSM Thermal.
Added Boeffla Wakelock blocker.
optimized crypto crc32 for arm64
Set default compression zram to Lz4.
many more.
Status
This kernel is very high experimental due the source is from ported.
This kernel tested on (Official RR, AEX, Citrus-CAF).
Boot = OK.
Sound, speaker, earphone, mic = OK.
Camera [front/back] = OK.
Fingerprint =OK.
Touchscreen = OK.
IR Blast = "User report" OK.
WIFI = OK.
RIL = OK.
Radio = OK.
BUGS ?
So far, i'm never facing any problem.
tell me if you found it.
Little Story
this kernel is nothing without Noyer, first many thanks and credits goes to him and this is his source : msm-3.18
My source is little different with Noyer source, while i'm using CAF tag release and manual upstream to Kernel.org.
but this kernel can't be done without Noyer commits in git, i'm still learn to make this kernel more stable with a lots of features.
CREDITS
(Not in order)
Eduardo Noyer a.k.a bitrvmpd
Savoca
Francisco Franko
Nicecream
TheScarastic
Tell me if i miss someone else.
Download
XDA-DOWNLOAD
XDA:DevDB Information
Clarity, Kernel for the Xiaomi Redmi 4X
Contributors
rainforce279, bitrvmpd
Source Code:https://github.com/ryan-andri/android_kernel_santoni
Kernel Special Features: KCAL, Wakelock Blocker.
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2017-12-15
Created 2017-12-14
Last Updated 2017-12-14
Click to expand...
Click to collapse
Thanks man! in my lineage os 14.1 work perfectly!
Good morning, today I bring you the update of OpTX v1.0, for those who are using v1.0 and want to go to v2.0, you just need to go to TWRP to wipe in: system, product and vendor, Flash the ROM and a kernel, DOESN'T NEED CLEAR DATE OR INTERNAL STORAGE!
That said, let's go to changelogs
* - Performance Tweaks
* - Added FHD + and WQHD + resolution in high performance mode
* - Attempt to fix safetynet
* - Tweaks for a better scroll
* - Tweaks for better battery life
* - Path to reduce RAM usage
* - Take debloat
* - Dalvik settings
* - Attempt to fix bug (A10) camera
* - Magisk v23 included
* - And some things I don't remember for now xD
OpTX ROM v2.0
A10: https://drive.google.com/drive/folders/1qbO8AOYq8Z2B2C8SX2AAhvnVGdbQcnyv?usp=sharing
How to install?
(For those who are installing OpTX ROM v2.0 without being in v1.0)
Installation:
Wipe it:
- system;
- vendor;
- product;
- date
- cache;
- dalvik.
- Install the rom
- Kernel (optional);
- Clean the dalvik and reboot.
We recommend:
Eureka kernel: https://github.com/Chatur27/Eureka-Kernel-Exynos7885-Q-R/releases
Eureka kernel source: https://github.com/Chatur27/Eureka-Kernel-Exynos7885-Q-R/archive/refs/tags/R7.0r.zip
Kernel source stock: https://opensource.samsung.com/uploadSearch?searchValue=SM-A105
Thanks to everyone who helped me and to all beta testers, I will endeavor to deliver the best to you xD
Thanks
@physwizz
@Chatur27
@Gollo99
@haxis_willow
for help me
CSC feature by @YasirArafatShihab
Camera Feature by @el0xren
galinha farofada said:
Good morning, today I bring you the update of OpTX v1.0, for those who are using v1.0 and want to go to v2.0, you just need to go to TWRP to wipe in: system, product and vendor, Flash the ROM and a kernel, DOESN'T NEED CLEAR DATE OR INTERNAL STORAGE!
That said, let's go to changelogs
* - Performance Tweaks
* - Added FHD + and WQHD + resolution in high performance mode
* - Attempt to fix safetynet
* - Tweaks for a better scroll
* - Tweaks for better battery life
* - Path to reduce RAM usage
* - Take debloat
* - Dalvik settings
* - Attempt to fix bug (A10) camera
* - Magisk v23 included
* - And some things I don't remember for now xD
OpTX ROM v2.0
A10: https://drive.google.com/drive/folders/1qbO8AOYq8Z2B2C8SX2AAhvnVGdbQcnyv?usp=sharing
How to install?
(For those who are installing OpTX ROM v2.0 without being in v1.0)
Installation:
Wipe it:
- system;
- vendor;
- product;
- date
- cache;
- dalvik.
- Install the rom
- Kernel (optional);
- Clean the dalvik and reboot.
We recommend:
Eureka kernel:
A10: https://t.me/eureka_kernel/168
Thanks to everyone who helped me and to all beta testers, I will endeavor to deliver the best to you xD
Click to expand...
Click to collapse
Is that a rom or what? If its a ROM what is the android version
galinha farofada said:
Good morning, today I bring you the update of OpTX v1.0, for those who are using v1.0 and want to go to v2.0, you just need to go to TWRP to wipe in: system, product and vendor, Flash the ROM and a kernel, DOESN'T NEED CLEAR DATE OR INTERNAL STORAGE!
That said, let's go to changelogs
* - Performance Tweaks
* - Added FHD + and WQHD + resolution in high performance mode
* - Attempt to fix safetynet
* - Tweaks for a better scroll
* - Tweaks for better battery life
* - Path to reduce RAM usage
* - Take debloat
* - Dalvik settings
* - Attempt to fix bug (A10) camera
* - Magisk v23 included
* - And some things I don't remember for now xD
OpTX ROM v2.0
A10: https://drive.google.com/drive/folders/1qbO8AOYq8Z2B2C8SX2AAhvnVGdbQcnyv?usp=sharing
How to install?
(For those who are installing OpTX ROM v2.0 without being in v1.0)
Installation:
Wipe it:
- system;
- vendor;
- product;
- date
- cache;
- dalvik.
- Install the rom
- Kernel (optional);
- Clean the dalvik and reboot.
We recommend:
Eureka kernel:
A10: https://t.me/eureka_kernel/168
Thanks to everyone who helped me and to all beta testers, I will endeavor to deliver the best to you xD
Click to expand...
Click to collapse
I see awesome stuff and I will try it now. Just tell me android version
@galinha farofada Please check your PM inbox. Thank you.
-Regards: Badger50
Abd El-Rahman El-Batal said:
Is that a rom or what? If its a ROM what is the android version
Click to expand...
Click to collapse
android 10 ROM
Hola
I have tried the rom and the camera has errors. The solution is to move the folders "StickerCenter", "StickerFaceAR3", "StickerProvider", "StickerStamp" to "system/priv-app/...". (those folders are located in the stock rom)
Then, I liked how clean I was, but the wifi I notice very slow. It is appreciated just as much that you take the time to create a rom for the samsung a10! :D
sorry for English, I'm using a web translator.
Hello i use samsung a105g , this rom is work fine in my device, but the camera got some error in 2 second force close,..any solution? Thanks..Sorry for my bad english language
Hi. I would like to try your rom, but link is not working. Can you fix it please
Thanks!
_tio_mt_ said:
Good morning, today I bring you the update of OpTX v1.0, for those who are using v1.0 and want to go to v2.0, you just need to go to TWRP to wipe in: system, product and vendor, Flash the ROM and a kernel, DOESN'T NEED CLEAR DATE OR INTERNAL STORAGE!
That said, let's go to changelogs
* - Performance Tweaks
* - Added FHD + and WQHD + resolution in high performance mode
* - Attempt to fix safetynet
* - Tweaks for a better scroll
* - Tweaks for better battery life
* - Path to reduce RAM usage
* - Take debloat
* - Dalvik settings
* - Attempt to fix bug (A10) camera
* - Magisk v23 included
* - And some things I don't remember for now xD
OpTX ROM v2.0
A10: https://drive.google.com/drive/folders/1qbO8AOYq8Z2B2C8SX2AAhvnVGdbQcnyv?usp=sharing
How to install?
(For those who are installing OpTX ROM v2.0 without being in v1.0)
Installation:
Wipe it:
- system;
- vendor;
- product;
- date
- cache;
- dalvik.
- Install the rom
- Kernel (optional);
- Clean the dalvik and reboot.
We recommend:
Eureka kernel: https://github.com/Chatur27/Eureka-Kernel-Exynos7885-Q-R/releases
Eureka kernel source: https://github.com/Chatur27/Eureka-Kernel-Exynos7885-Q-R/archive/refs/tags/R7.0r.zip
Kernel source stock: https://opensource.samsung.com/uploadSearch?searchValue=SM-A105
Thanks to everyone who helped me and to all beta testers, I will endeavor to deliver the best to you xD
Thanks
@physwizz
@Chatur27
@Gollo99
@haxis_willow
for help me
CSC feature by @YasirArafatShihab
Camera Feature by @el0xren
Click to expand...
Click to collapse
please can you give me new link
_tio_mt_ said:
Good morning, today I bring you the update of OpTX v1.0, for those who are using v1.0 and want to go to v2.0, you just need to go to TWRP to wipe in: system, product and vendor, Flash the ROM and a kernel, DOESN'T NEED CLEAR DATE OR INTERNAL STORAGE!
That said, let's go to changelogs
* - Performance Tweaks
* - Added FHD + and WQHD + resolution in high performance mode
* - Attempt to fix safetynet
* - Tweaks for a better scroll
* - Tweaks for better battery life
* - Path to reduce RAM usage
* - Take debloat
* - Dalvik settings
* - Attempt to fix bug (A10) camera
* - Magisk v23 included
* - And some things I don't remember for now xD
OpTX ROM v2.0
A10: https://drive.google.com/drive/folders/1qbO8AOYq8Z2B2C8SX2AAhvnVGdbQcnyv?usp=sharing
How to install?
(For those who are installing OpTX ROM v2.0 without being in v1.0)
Installation:
Wipe it:
- system;
- vendor;
- product;
- date
- cache;
- dalvik.
- Install the rom
- Kernel (optional);
- Clean the dalvik and reboot.
We recommend:
Eureka kernel: https://github.com/Chatur27/Eureka-Kernel-Exynos7885-Q-R/releases
Eureka kernel source: https://github.com/Chatur27/Eureka-Kernel-Exynos7885-Q-R/archive/refs/tags/R7.0r.zip
Kernel source stock: https://opensource.samsung.com/uploadSearch?searchValue=SM-A105
Thanks to everyone who helped me and to all beta testers, I will endeavor to deliver the best to you xD
Thanks
@physwizz
@Chatur27
@Gollo99
@haxis_willow
for help me
CSC feature by @YasirArafatShihab
Camera Feature by @el0xren
Click to expand...
Click to collapse
Can i flash this with OrangeFox Recovery?
The link seems to be broken. Would you be kind to re-upload the rom to MEGA or MediaFire since you also won't have to deal with the google drive quota limit.
You Google drive download link not working. Please repair the link please
Pls fille man .IRe-upload the file please
There are links to a newer version 2.5 on telegram: {Mod edit}
ipp0liini said:
There are links to a newer version 2.5 on telegram: {Mod edit}
Click to expand...
Click to collapse
@ipp0liini
I've removed the link to Telegram from your above post! Regarding social media links please observe that as an exemption from the last bullet of rule no. 5 of the XDA Forum Rules, we grant only developers the privilege to share references to their social media in their own development threads and if thorough support is provided in the thread. These conditions obviously don't apply to your posts, threads or you. Additional information is also available here:
Telegram Chat Channels - Way Forward
WhatsApp/Telegram Groups and Channels - Going Forward Hello XDA family! Just notifying all members that posting certain links to Telegram and other sites like WhatsApp is now allowed on XDA. What does that mean? We will allow links to messages...
forum.xda-developers.com
Please refrain for sharing of social media references unless within your own development threads and do not drag members away from XDA to social media!
Thanks for your future cooperation.
Regards
Oswald Boelcke
Senior Moderator
_tio_mt_ said:
A10: https://drive.google.com/drive/folders/1qbO8AOYq8Z2B2C8SX2AAhvnVGdbQcnyv?usp=sharing
Click to expand...
Click to collapse
@_tio_mt_ Thread closed! Please advise the moderators team (best via the report function) to re-opened your thread when ready to provide a functionable download link. Thanks for your cooperation.
Regards
Oswald Boelcke