Database Users

[q] help me !! My htc magic 32a is dead..

How to return the old fastboot. But the fastboot not work... I updated the radio with recovery and my htc not work . When i turn '' on '' the screen is freez... The htc magic screen... Pls help !!!!

1. Turn off Magic
2. Remove battery and wait for 1-2 min. Plug in it back
3. Try to start into fastboot by pressing Back + Power
4. If no success repeat 1 and 2 and try to get into hboot: VolumeDown + Power
5. If no success repeat 1 and 2 and try run recovery-mode: Home + Power
If no success - you have a brick. Find repair-engineer with JTAG.

Not development related.
Moving to General.
Next time it'll be deleted without warning!

[TUT][i9001] HOW TO UNBRICK YOUR SOFTBRICKED I9001

Soft bricking often happens in when you try to install a ROM which is not optimized for your phone e.g:Installing i9100 SII ROM on your i9001.
Here is a basic tutorial on how to unbrick a i9001.
Requirements:
For unbricking your phone you are going to need these:
1.An official Samsung firmware
2.ODIN downloader
3.AriesVE.ops for ODIN usage.
4.USB cable
5.Samsung KIES drivers installed
6.Patience!!!
OK.first of all you need to check things above and make sure you have them all.
Fortunately when your phone is soft bricked(when soft bricked your phone doesn't boot into the OS And instead of that you'll see picture of a phone connected to a computer and on the connection line there's a warning sign) can get yo the download mode. So first get your phone in download mode by pressing this button combination: volume down+ home key+ power button
So then get set to use ODIN.
Connect your phone to the PC and make sure you have installed drivers and also killed every KIES process.(If you have done well till now you can see one black gets yellow and in Terminal you'll see 2 lines "detected","added") So start ODIN and place AriesVE.ops as the ops file then use your official firmware (extension should be like this |..... .tar.md5|).To get your firmware working tick "one package" and place you "MD5" file in "one package" location. Then after MD5 checking start the process and go grab a beer.
Wait about 7 to 10 minutes to see PASS on the block.
Then your phone would automatically reboot into your android OS. Then you can start rooting, Tweaking and other stuff again.
At least one you have your phone and your warranty back.
FAQs:
1.my phone gets stuck at setup connection. what should I do?
Chill out! Don't panic! Simply remove your battery for 10 seconds then do these things all again and proceed!
2.my phone boot loops what do I do?
Simply reboot your phone in the Recovery mode "volume down+ power" and wipe cache/dalvik cache if you can.
(Once I installed FOTA from stock recovery and that worked for me)(I suggest you install the official TWRP recovery from SDcard to have more options)
3.you tell me your questions!I'll edit the topic later!
At last feel free to ask any dumb question. Dumb questions are muck more valuable than dumb mistakes!
Please hit thanks button if I helped you out!
Sent from my GT-I9001 using xda premium

Lg optimus L5 612 not booting up, once switched on goes directly to CWM

Hi
I am new to andriod devices, once i bought this LG L5 612 device i wanted to unlock it to all networks, so went searching the google and found some =videos which stated that you need to root your device first to unlock your phone for any network, i did root my device, but learnt that you need to do more than that to unlock your device for other networks.
After that i did kdz updater and that was my current state of my phone,
Yesterday i had an information on my phone which stated that , There is a software update available for your phone. I did install that which asked for a restart , and after that restart my device starts flickers a second and goes directly to CWM recovery, I dont know what to do next , i dont seem to have any backups and stuff.
Could anybody who knows how to get me out of this , can you please lend me a hand,
when i connect to the pc the phone is not getting detected at all
Also emergency mode (by pressing both volume keys and power button)is also not coming up
Any help would be much appreciated

You can select from CWM recovery " boot normal" [ for select use power buttom] or can navigate in that menu till you find a command to boot [ volume up/down to navigate].
Tell me if you succeded.

prasad.sethuramalingam said:
Hi
I am new to andriod devices, once i bought this LG L5 612 device i wanted to unlock it to all networks, so went searching the google and found some =videos which stated that you need to root your device first to unlock your phone for any network, i did root my device, but learnt that you need to do more than that to unlock your device for other networks.
After that i did kdz updater and that was my current state of my phone,
Yesterday i had an information on my phone which stated that , There is a software update available for your phone. I did install that which asked for a restart , and after that restart my device starts flickers a second and goes directly to CWM recovery, I dont know what to do next , i dont seem to have any backups and stuff.
Could anybody who knows how to get me out of this , can you please lend me a hand,
when i connect to the pc the phone is not getting detected at all
Also emergency mode (by pressing both volume keys and power button)is also not coming up
Any help would be much appreciated
Click to expand...
Click to collapse
what exactly you did on kdz?

Sabyn said:
You can select from CWM recovery " boot normal" [ for select use power buttom] or can navigate in that menu till you find a command to boot [ volume up/down to navigate].
Tell me if you succeded.
Click to expand...
Click to collapse
I tried reboot but its not helping me out , its the bootloop problem going everytime to CWM

Redmi 2 pro super bricked, help me!

last night I was playing with my redmi 2 pro and bricked it. What I did with was idiotic. I will describe the incident in depth.
My mobile was running on miui 8 6.7.21(lollipop) but I was having some issue with it, so I wanted to use a custom rom named XOSP. I know that this rom doesn’t work on lollipop bootloader but still I flashed the rom and obvious result is I got boot loop. I could still have fixed that just by flashing fastboot rom but instead of doing that I boot my mobile into fastboot mode and flash the emmc_appsboot.mbn via cmd with fastboot command then I reboot the device. now my device keeps vibrating, I mean if I try to power on my device by pressing and holding power button it starts vibrating in a loop. If I hold volume down and power button it vibrates 13 times, then stops for 1 or 2 second, in this pause if release power button and volume button phone stops vibrating. By the way no led light up or no light in display.
I have connected the mobile with pc but nothing happend, even I can’t find my device in device manager. I have all the drivers and mi flashtool installed and Driver Signature Verification
is disabled in my pc. I have tried to connect the device with battery without battery with volume button pressed but nothing happens. I even tried the resurrection method by connecting to point with wire but still nothing happens it.
Bro this is my only mobile and there is no xiaomi customer care in this country you are the only hope. I can’t buy another device within 7-8 months, so please help me to bring the device back.

Test point
Did this test point test point method not work for you?? -
Quick guide:
- Disassemble the phone and to weld together the two points (see attached picture).
- Connect your phone to your PC via USB
- Start MiFlash and make it all settings
- Set the phone battery
- Hitting, pressing "Flash" button
- Flash stuck on Attempting to connect Device - do not panic.
- It is necessary to remove the connection with the points and reconnect to the PC with the battery in the phone.
- The installation process will continue.
- As a result, the phone is loaded.

shanx_verma said:
Did this test point test point method not work for you?? -
Quick guide:
- Disassemble the phone and to weld together the two points (see attached picture).
- Connect your phone to your PC via USB
- Start MiFlash and make it all settings
- Set the phone battery
- Hitting, pressing "Flash" button
- Flash stuck on Attempting to connect Device - do not panic.
- It is necessary to remove the connection with the points and reconnect to the PC with the battery in the phone.
- The installation process will continue.
- As a result, the phone is loaded.
Click to expand...
Click to collapse
thanks

Cheers! ALL THE BEST!
gamernayeem said:
thanks
Click to expand...
Click to collapse
You're very very welcomebro, cuz I know exactly how it feels !!
Let me know if you face any issues..

shanx_verma said:
You're very very welcomebro, cuz I know exactly how it feels !!
Let me know if you face any issues..
Click to expand...
Click to collapse
a had a small problem after fixing the phone, when the phone booted up the screen was shaking and a there was dark shade around the a screen. though i dont have the problem now. Any idea whey it happened?

Never with me, so nope, no idea bro.

[Q] Please can someone help I killed my yotaphone 2

Hello to all here at xda im a new member and im hoping someone can help me,
I recently bought a yotaphone 2 from tinydeals in china and its model
P05-Yota which I think is china model YD-205 or 206
I wanted to upgrade the firmware to the latest firmware and I think I made two big mistakes.
First when I downloaded the yotaflasher software for windows I chose the eu firmware on option 2 and clicked to download it.also I dont think I put usb debugging on my phone.i put my phone into diwnloading mode and connected the phone to my pc.my pc recognised the phone and I clicked on option 1 in yotaflasher to flash mobile.
The flash process started but failed on most of the things it was supposes to get access to, my phone reatarted and now its on constant boot loop which shows the android logo.i can boot phone back into downloading mode but nothink else
I have read that as my phone is in boot loop and can still boot into downloading mode its soft bricked and not hard bricked so im guessing thats good news.
This is my own fault and im not very experienced in all this flashing and I fing yotaflasher hard to understand compared to odin ive used on samsung phones before
Please can anyone help a complete novice to revive his mobile
I would be greatful for any help and instructions and dont know if im allowed to do this on this site so I appologise to moderators if im not, but anyone that can help me get my phone working again I will transfer £20 to their paypal account as I would appreciate this help alot
Im sorry for being a noob and hope to hear from someone soon
Thx
Simon h

Sorry for my very, very bad english.
Try to reboot your phone in recovery mode.
Press power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose wipe data and factory reset.
Try several times if that does not work at once.
I made a big mistaske too and I solved the problem but with several attemps.
Good luck !

I appreciate your help
cheynei said:
Sorry for my very, very bad english.
Try to reboot your phone in recovery mode.
Press power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose wipe data and factory reset.
Try several times if that does not work at once.
I made a big mistaske too and I solved the problem but with several attemps.
y
Good luck !
Click to expand...
Click to collapse
Just wanted to saythanykyou and appreciate your reply and as soon as I get home I will try and boot into recovery and see how that goes.will update on progress
Again thankyou

simon121simon said:
Just wanted to saythanykyou and appreciate your reply and as soon as I get home I will try and boot into recovery and see how that goes.will update on progress
Again thankyou
Click to expand...
Click to collapse
No problem, I think it's the only solution... but you will loose all your data (I bought my yotaphone from tinydeals too and I killed it too)...
:fingers-crossed:

queation about yotaflasher
cheynei said:
No problem, I think it's the only solution... but you will loose all your data (I aboutbought my yotaphone from tinydeals too and I killed it too)...
:fingers-crossed:
Click to expand...
Click to collapse
Just a quick question, yotaflasher is a software im not familiar with and im not sure if im using it right.
Do I start yotaflasher and then type 2 and enter tochoose region.then type the number for the firmware I want and press enter.then when its finished downloading it seems ro freeze and I cant type any key to start flash so I have to exit software then restart it.
Do I then just type 1 and enter to start flashing phone then thats it or do you have to type proper commands into this software ro get it to work as im not sure if im using it right
I will be home in couple of hrs to test out what you told me
Thx

simon121simon said:
Just a quick question, yotaflasher is a software im not familiar with and im not sure if im using it right.
Do I start yotaflasher and then type 2 and enter tochoose region.then type the number for the firmware I want and press enter.then when its finished downloading it seems ro freeze and I cant type any key to start flash so I have to exit software then restart it.
Do I then just type 1 and enter to start flashing phone then thats it or do you have to type proper commands into this software ro get it to work as im not sure if im using it right
I will be home in couple of hrs to test out what you told me
Thx
Click to expand...
Click to collapse
Sorry again for my english...
1. without any software, reset your phone : turn off your phone (or, if it's not possible, press power button for a long time :20 - 30 seconds or more - and, as soon as the screen turn off) --> press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose "wipe data and factory reset" and wait...
2. After the reboot, put usb debugging on your phone
3 . install yotaflasher (so you also have the drivers on your computer).
4. put your phone on download mode : turn off your phone - then, press and hold the Volume down + Power button simultaneously for about 10 seconds
5. open yotaflasher on your computer and connect your phone (wich is on download mode)
6. chose the last EU firmware (option 2) and download it - after, click on option 1 and flash your mobile. Wait the necessary time without touch anything and, after maybe 10 ou 15 minutes, your phone will reboot.
We have the same phone from Tinydeals and I'm now on lolipop (after the flash).
Good luck !

usb debugging is the problem
cheynei said:
Sorry again for my english...
1. without any software, reset your phone : turn off your phone (or, if it's not possible, press power button for a long time :20 - 30 seconds or more - and, as soon as the screen turn off) --> press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, choose "wipe data and factory reset" and wait...
2. After the reboot, put usb debugging on your phone
3 . install yotaflasher (so you also have the drivers on your computer).
4. put your phone on download mode : turn off your phone - then, press and hold the Volume down + Power button simultaneously for about 10 seconds
5. open yotaflasher on your computer and connect your phone (wich is on download mode)
6. chose the last EU firmware (option 2) and download it - after, click on option 1 and flash your mobile. Wait the necessary time without touch anything and, after maybe 10 ou 15 minutes, your phone will reboot.
We have the same phone from Tinydeals and I'm now on lolipop (after the flash).
Good luck !
Click to expand...
Click to collapse
Hi there mate thx for the step by step guide but I think I know what the problem is.i originally didnt put it into usb debugging mode when I originally tried to flash the firmware.now as the mobile is stuck in boot loop and cant load up as normal I cant switch on usb debugging.is there a way through fastboot or that adb program.im just learning about these programs to flash mobiles with but if there is no way to enable usb debugging through any software I fear im screwed

simon121simon said:
Hi there mate thx for the step by step guide but I think I know what the problem is.i originally didnt put it into usb debugging mode when I originally tried to flash the firmware.now as the mobile is stuck in boot loop and cant load up as normal I cant switch on usb debugging.is there a way through fastboot or that adb program.im just learning about these programs to flash mobiles with but if there is no way to enable usb debugging through any software I fear im screwed
Click to expand...
Click to collapse
Yes, I know, don't worry, I bug my phone too - it's why you have, first, to reset your phone... try to put it on recovery mode, it's the only solution (I think).
--> Press the power button for a long time (20 - 30 seconds or more) and, as soon as the screen turn off, press and hold the Volume Up + Power button simultaneously for about 10 seconds. Then, you will see a menu : choose "wipe data and factory reset".
Try several times if that does not work at once.