Related
Download OxygenOS http://oxygenos.oneplus.net/oxygenos_1.0.0.zip
DO UNZIP your ZIP before flashing!!! installation ZIP is in ZIP file provided
Plain Aosp Rom
Download Feedback App https://s3.amazonaws.com/oxygenos.oneplus.net/Feedback_v1.0.2.apk
Note: You’ll need to enable installations from unknown sources (settings > security) in order to install the feedback app on OxygenOS.
Please make sure all your data and files are backed up before commencing. Flashing OxygenOS onto CM does require a system wipe, so you will lose all of your data. We are actively working on an easier, more automated solution soon to be available, but for now the build must be flashed manually.
Please proceed only if you are confident in your abilities to flash a custom ROM. This guide exists to help you flash OxygenOS, but things can still go wrong if not followed correctly. While rooting and flashing will not void your OnePlus warranty, any damage caused by improper flashing is not covered under warranty.
The following instructions assume you have Fastboot and ADB installed.
Step 1
You first need to flash a recovery onto your device. We recommend using TWRP. Please download the recovery image to your computer. You can follow their instructions to flash recovery, or you can reference these steps:
Boot into fastboot mode. You can do this on your OnePlus One by holding down the power button and the volume up button. When you see the fastboot logo, connect your device to your computer.
In your terminal window, find the folder where you put the recovery image and run the following commands:
fastboot oem unlock (You can skip this step if your phone’s bootloader is already unlocked).
fastboot flash recovery <recovery.img>. Image file should be the TWRP recovery image.
fastboot reboot
You should now have the recovery installed.
Step 2
Copy oxygenos_1.0.0.flashable.zip to your phone. On a Mac, you can use Android File Transfer.
Step 3
Boot into recovery. You can do this on your OnePlus One by holding down both the volume down key and the power button.
Step 4
Once you are in the recovery interface, the first thing you want to do is a factory reset. Again, you will lose all your data so please make sure you have backed up everything before doing this.
Step 5
After the wipe, go to install and find oxygenos_1.0.0.flashable.zip. Confirm flash. This will flash OxygenOS onto your device.
Step 6
After the flash succeeds, you can reboot the device, which will take you to the new OxygenOS. Enjoy!
List of known issues:
When printing images, printer service may stop
Cannot hang up a call using headphone controls (intermittent)
OTG can only recognize FAT32 file system
During system update, display of wifi/data notification may be incorrect
During system update, display of version number may be incorrect
Files sometimes crash when uploading files to the cloud
Files may crash when renaming image files
Files does not support multi-select deletes
manishsharma17 said:
Download OxygenOS http://oxygenos.oneplus.net/oxygenos_1.0.0.zip
Download Feedback App https://s3.amazonaws.com/oxygenos.oneplus.net/Feedback_v1.0.2.apk
Note: You’ll need to enable installations from unknown sources (settings > security) in order to install the feedback app on OxygenOS.
Please make sure all your data and files are backed up before commencing. Flashing OxygenOS onto CM does require a system wipe, so you will lose all of your data. We are actively working on an easier, more automated solution soon to be available, but for now the build must be flashed manually.
Please proceed only if you are confident in your abilities to flash a custom ROM. This guide exists to help you flash OxygenOS, but things can still go wrong if not followed correctly. While rooting and flashing will not void your OnePlus warranty, any damage caused by improper flashing is not covered under warranty.
The following instructions assume you have Fastboot and ADB installed.
Step 1
You first need to flash a recovery onto your device. We recommend using TWRP. Please download the recovery image to your computer. You can follow their instructions to flash recovery, or you can reference these steps:
Boot into fastboot mode. You can do this on your OnePlus One by holding down the power button and the volume up button. When you see the fastboot logo, connect your device to your computer.
In your terminal window, find the folder where you put the recovery image and run the following commands:
fastboot oem unlock (You can skip this step if your phone’s bootloader is already unlocked).
fastboot flash recovery <recovery.img>. Image file should be the TWRP recovery image.
fastboot reboot
You should now have the recovery installed.
Step 2
Copy oxygenos_1.0.0.flashable.zip to your phone. On a Mac, you can use Android File Transfer.
Step 3
Boot into recovery. You can do this on your OnePlus One by holding down both the volume down key and the power button.
Step 4
Once you are in the recovery interface, the first thing you want to do is a factory reset. Again, you will lose all your data so please make sure you have backed up everything before doing this.
Step 5
After the wipe, go to install and find oxygenos_1.0.0.flashable.zip. Confirm flash. This will flash OxygenOS onto your device.
Step 6
After the flash succeeds, you can reboot the device, which will take you to the new OxygenOS. Enjoy!
List of known issues:
When printing images, printer service may stop
Cannot hang up a call using headphone controls (intermittent)
OTG can only recognize FAT32 file system
During system update, display of wifi/data notification may be incorrect
During system update, display of version number may be incorrect
Files sometimes crash when uploading files to the cloud
Files may crash when renaming image files
Files does not support multi-select deletes
Click to expand...
Click to collapse
OMG!!! Is this a Dream???? Is this real?
CM version?
manish.kumar86 said:
CM version?
Click to expand...
Click to collapse
its not based on Cm its based on AOSP its 5.0.2
Yash Kanchhal said:
So when we are factory resetting the phone in recovery is it the same thing like wiping the other thing (cache, dalvik cache etc). I'm new in this so I'm not able to understand that please help me in this & when is the CM12S coming anyone knows?????
Sent from my A0001
Click to expand...
Click to collapse
TWRP has an option for factory reset ...
There's already a thread for this here:
http://forum.xda-developers.com/showthread.php?t=3072259
Transmitted via Bacon
Yash Kanchhal said:
Ohk thnx mate it means wiping is every thing????? Right ????
Sent from my A0001
Click to expand...
Click to collapse
yes sir ..use the option of factory reset in twrp and you should be good
timmaaa said:
There's already a thread for this here:
http://forum.xda-developers.com/showthread.php?t=3072259
Transmitted via Bacon
Click to expand...
Click to collapse
When i created the thread the thread was not there in present form
manishsharma17 said:
When i created the thread the thread was not there in present form
Click to expand...
Click to collapse
Unfortunately it looks like he created his first.
Transmitted via Bacon
Nice spam indeed. Three threads, three posts, three times begging for thanks. Bah.
Can you add my guide thread to the OP please?
http://forum.xda-developers.com/oneplus-one/general/guide-how-to-install-oxygenos-t3072500
Word of caution! I backuped on the internal sd. Had all my backups of os's and app data completely wiped. Never checked the wipe internal sd box. Use and external backup.
Is anyone with SuperSU 2.46 having issues with WIFI not turning on and also having screen artifacts that force to do a hard reboot?
cyberon said:
Is anyone with SuperSU 2.46 having issues with WIFI not turning on and also having screen artifacts that force to do a hard reboot?
Click to expand...
Click to collapse
Getting neither of those. Main problem I'm having is major Google Play Services drain. It's the same bug we had on CM12 nightlies some time ago and my phone is permanently awake
Sent from my A0001 using Tapatalk
Hello, due to having a similar topic here http://forum.xda-developers.com/oneplus-one/general/oxygen-os-released-download-t3072259, I will have to close this thread.
Please continue the discussion in the one linked.
Regards
Hi guys,
I have TWRP recovery installed and Exodus.
Is there a way I can fully restore my OP2 back to stock.
IE, stock recovery and stock OS?
Can I also unroot and lock the device so it looks like nothing ever happened?
Lets say I need to return my OP2 for maintenance.
Thanks in advance.
Also I see OxygenOS 2.1.1 released recently, is there a full OS download?
SavellM said:
Hi guys,
I have TWRP recovery installed and Exodus.
Is there a way I can fully restore my OP2 back to stock.
IE, stock recovery and stock OS?
Can I also unroot and lock the device so it looks like nothing ever happened?
Lets say I need to return my OP2 for maintenance.
Thanks in advance.
Also I see OxygenOS 2.1.1 released recently, is there a full OS download?
Click to expand...
Click to collapse
Its simple !!
download the official signed rom.zip from oneplus two forum !!
place it into ur root folder
wipe data, format it
now flash the stock rom
restart ur phone !
when the phone start up, go to developer option > usb debug !
now download the stock recovery and put it in adb folder in ur pc.
type the command
fastboot flash recovery recovery.img
(recovery.img is the recovery image which u downloaded from onplus two forum. u can rename it and place it in adb folder)
after that type command
fastboot oem lock
press enter.
reboot ! violaa !!
u now have stock recover + stock rom = new device !!
enjoy
hope i have helped u !!:good:
If you are returning it for maintenance Oneplus allows rooted and modded devices to still be under warranty as long as it is not the modding that caused the problem.
DISCLAIMER : You are solely responsible for what you do with this information.
Last Update: Jan.29 (2017)
••••••••••••••••••••••
Custom Recovery
••••••••••••••••••••••
Thanks to @jackeagle for these
TWRP Builds (these ARE compatible)
I used FlashFire to flash the recovery (must be rooted)
See second post for help with Odin.
•••••••••••
Backups
•••••••••••
Notice: THESE ARE TWRP BACKUPS!!
A factory reset will be necessary prior to the restore, or best before it.
Further help in post 2
This debloated (with SuperSU) backup is the latest I have uploaded and it's only around 622mb
A debloated without root version is also abailable.
**by debloated I have removed a bunch of stock Samsung/Google and other applications.
This old 2gb backup has SuperSU and AppOps pre-installed(forgot to remove, has all stock apps)
These other stock partitions include the stock recovery.
I am currently unable (no PC) to produce a flashable zip, if you know what you are doing you can make use of these other files.
This phone needs:
- A permissive kernel
- a deodexed version of this ROM (for xposed)
- cm12/13
- etc etc
If you found this post helpful please hit thank you and leave feedback
Helpful Info:
TWRP NOT RECOGNIZING THE BACKUP???
Stay calm, here's what you do:
zenful said:
∆∆∆make sure to put the files for the these backups in a folder on root of your SD card called TWRP/BACKUPS/<device ID>/BACKUPS/ in order for TWRP to recognize the backups on your device. If you don't know your device ID, just use TWRP and make a backup of whats currently on your device to get the folder with that device ID than place the backup in that location.
Click to expand...
Click to collapse
How to Flash TWRP recovery using Odin said:
Download Odin 3.12.3
Unzip the Odin 3.12.3 .zip file and run/open Odin3 v3.12.3.exe file from the extracted files on your PC.
Make sure you’ve downloaded a Odin flashable TWRP recovery .tar file compatible for your device.
(If applicable) Enable OEM unlock:
Go to Settings » About phone » and tap Build number seven times to enable Developer options.
Go back to main Settings page, scroll to bottom and select Developer options from there.
Under Developer options, look for Enable OEM unlock checkbox/toggle and enable it.
Boot your device into Download mode:
Switch off your device.
Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.
Press Volume Up on the warning screen to accept it and boot into Download mode.
Once your device is in download mode, connect it to the PC with a USB cable. The Odin window on PC should detect the device and show an “Added!!” message.
Now click on the AP tab on Odin window and select the TWRP recovery .tar file that you downloaded for your device.
└ Note: DON’T play with any other options on the screen. You’re only required to connect your device and select the TWRP recovery .tar file in the AP tab.
Click the Start button on Odin and wait for it to finish the process. Once it has finished successfully, you’ll see a pass message on the Odin screen.
Your device will automatically reboot when Odin is done flashing. You can then disconnect your device.
How to boot into TWRP recovery on a Samsung Galaxy device
Switch off your device.
Press and hold “Home + Power + Volume Up” buttons for a few seconds and as soon as you see your device’ logo on-screen, release three buttons altogether. Your device will boot into TWRP recovery.
source
source
Click to expand...
Click to collapse
Anybody find out about custom recoveries on the SM-978L?
Well I don't know if this helps, but my brother soft bricked his phone while trying to put a custom boot-animation on his phone. I figured out how to fix it by flashing https://download.chainfire.eu/719/CF-Root/CF-Auto-Root/CF-Auto-Root-e5lte-e5lteub-sme500m.zip using odin 3.09. After i flashed it and reset his device it booted back up like normal, and he had root. Just for ****s and giggles i decided to try to flash http://forum.xda-developers.com/gal...ment/recovery-twrp-samsung-galaxy-e5-t3283089. When i tried to reboot into recovery it told me that the seandroid was enforcing. My question is if we flash http://forum.xda-developers.com/gal...nel-permissive-lollipop-stock-kernel-t3387015 will we be able to use this custom recovery. I know it is not built for this specific device, but i was wondering if they were close enough for it to work. Just to afraid to flash it and brick his device with no backup images available.
bndnrd321 said:
Well I don't know if this helps, but my brother soft bricked his phone while trying to put a custom boot-animation on his phone. I figured out how to fix it by flashing https://download.chainfire.eu/719/CF-Root/CF-Auto-Root/CF-Auto-Root-e5lte-e5lteub-sme500m.zip using odin 3.09. After i flashed it and reset his device it booted back up like normal, and he had root. Just for ****s and giggles i decided to try to flash http://forum.xda-developers.com/gal...ment/recovery-twrp-samsung-galaxy-e5-t3283089. When i tried to reboot into recovery it told me that the seandroid was enforcing. My question is if we flash http://forum.xda-developers.com/gal...nel-permissive-lollipop-stock-kernel-t3387015 will we be able to use this custom recovery. I know it is not built for this specific device, but i was wondering if they were close enough for it to work. Just to afraid to flash it and brick his device with no backup images available.
Click to expand...
Click to collapse
Did you ever gather up enough courage to try? It would seem like it should work. I might try it myself, but I cant afford to buy another one if it fails.
JoeSchmo2840 said:
Did you ever gather up enough courage to try? It would seem like it should work. I might try it myself, but I cant afford to buy another one if it fails.
Click to expand...
Click to collapse
I'm the brother bndnrd was referring to.... at this time we haven't tried it but we are almost sure that this straight talk (tracphone) version is the same as the one mentioned. Just like everyone else though I just don't have $200 to test it if it were to fail.
My stupidity in not setting perms right on the boot animation is what caused the soft brick in the first place and apparently.. what ever he did.... was able to boot the phone back up bypassing perms.
If I can pay off a few bills early enough I will set aside some cash and try the build we think will work but that will be at least a month away.
If TWRP actually works after that permissive kernel is installed, we can finally get a stock nandroid backup. That would take the fear away from testing that custom cyanogen build.
JoeSchmo2840 said:
If TWRP actually works after that permissive kernel is installed, we can finally get a stock nandroid backup. That would take the fear away from testing that custom cyanogen build.
Click to expand...
Click to collapse
I ended up making a nandroid backup of this phone and the only thing I couldn't make a backup of was the boot and recovery for it.
You can find out all the partitions you need to use dd with to start a backup by doing
ls -al /dev/block/bootdevice/by-name
Click to expand...
Click to collapse
If I had the resources for a computer I would have uploaded a copy of my stock image, I'll see what I can do about getting one up. Also saw this tool that I thought may be useful for getting a flashable image.
tool-mmcblk0-extractor
Anyways, until next time x.x
Just wanted to post this and see if anyone has theirs different.
Also if someone could decompile the boot.img (I have a link to mine I can send) I'll work on a passive kernel for us.
допоможіть! потрібна прошивка для мого sm-s978l 4g
Took and wiped the system and data. now loaded only Samsung logo and TWRP 3.0.2
Or maybe someone has a backup of SM-S978L 4G?
oleksandr.lutsyk said:
Took and wiped the system and data. now loaded only Samsung logo and TWRP 3.0.2
Or maybe someone has a backup of SM-S978L 4G?
Click to expand...
Click to collapse
What do you need a backup of? I haven't uploaded data or system partitions yet but I have the rest.
Also, you successfully got TWRP 3.0.2 working? If so please share the details on how please
[via Tapatalk]
Help! Need firmware for my SM-S978L [5.0.2] Straight Talk's E5
Took and wiped the system and data. now loaded only Samsung logo and tvrp
Or maybe someone has a backup of SM-S978L [5.0.2] Straight Talk's E5?
---------- Post added at 10:22 PM ---------- Previous post was at 10:19 PM ----------
I need backup or firmware....
---------- Post added at 10:49 PM ---------- Previous post was at 10:22 PM ----------
zenful said:
What do you need a backup of? I haven't uploaded data or system partitions yet but I have the rest.
Also, you successfully got TWRP 3.0.2 working? If so please share the details on how please
[via Tapatalk]
Click to expand...
Click to collapse
androiding. how/how-to-install-twrp-recovery-using-odin/
If you do this it will be possible. Make a backup for me)
updated main post, will try uploading backup by tonight
zenful backup request
zenful said:
UPDATED dec 8 2016
#############
TWRP thanks to user @jackeagle for providing us with some TWRP builds for the E5.
Jackeagle TWRP build (I believe he has updated versions but this is the one I KNOW works for this phone)
https://www.androidfilehost.com/?fid=24052804347821291
Other builds
http://forum.xda-developers.com/showpost.php?p=62973386&postcount=2
http://androiding.how/galaxy-e5-twrp-recovery/
http://androiding.how/how-to-install-twrp-recovery-using-odin/
####
You can also use FlashFire to flash the recovery as well (must have root first)
Have fun guys!
#edit dec11.2016
Have a twrp backup of the /system partition and a dump of the other partitions as well, just get up with me on here.
Click to expand...
Click to collapse
Hello, I currently have the twrp running but for some reason google play services has stopped working has blocked me our of many of my apps and functions on the phone. The only backup I have at all has this occurring may I please use your backup and partitions so I can have a working phone for the upcoming holiday.
El_Ogan said:
Hello, I currently have the twrp running but for some reason google play services has stopped working has blocked me our of many of my apps and functions on the phone. The only backup I have at all has this occurring may I please use your backup and partitions so I can have a working phone for the upcoming holiday.
Click to expand...
Click to collapse
Hey @El_Ogan check your inbox, or the first post to this thread for the link. Hope it helps, happy holidays
??/
zenful said:
Hey @El_Ogan check your inbox, or the first post to this thread for the link. Hope it helps, happy holidays
Click to expand...
Click to collapse
i have this phone and twrp works but nothing eles is this a complet back up i can just restore from twrp or is there something eles i am in need of to get this phoe working its a sm-s978l but shows e500h when i plug it in to my computer ??? so i am really confused
bullfrog83 said:
i have this phone and twrp works but nothing eles is this a complet back up i can just restore from twrp or is there something eles i am in need of to get this phoe working its a sm-s978l but shows e500h when i plug it in to my computer ??? so i am really confused
Click to expand...
Click to collapse
Hey no worries and yes it's just a full backup from TWRP just stupid in the sdcard and navigate to TWRP's restore section and it should auto find it. Any other files needed I'll also have, but this a bit a flashable zip or flashable via Odin, and
I imagine Odin says that after you flashed TWRP right? If so that's because that's what the TWRP was made for so it seems like Odin checked the recovery.
If it said that BEFORE you flashed it, that's very intriguing and helpful to me
thank you very much i really like this phone maybe ill be able to use it again havent went back to odin since i put twrp on the phone but when i plug into my computer it says e500h in window on my computer when in twrp on the phone used to say sm-s978l so im not sure just the way it is introduced by windows
bullfrog83 said:
i have this phone and twrp works but nothing eles is this a complet back up i can just restore from twrp or is there something eles i am in need of to get this phoe working its a sm-s978l but shows e500h when i plug it in to my computer ??? so i am really confused
Click to expand...
Click to collapse
bullfrog83 said:
thank you very much i really like this phone maybe ill be able to use it again havent went back to odin since i put twrp on the phone but when i plug into my computer it says e500h in window on my computer when in twrp on the phone used to say sm-s978l so im not sure just the way it is introduced by windows
Click to expand...
Click to collapse
I feel ya just let me know if you need any more help and goodluck
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Brilliant! Thank you so much! Do you know any custom ROM what is better than the factory ROM?
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Adreno306™ said:
There is no custom ROM for this phone yet.
But I'm trying to make LITE ROM.
Click to expand...
Click to collapse
Do you think it's easier/possible to adapt a ROM from a similar device like say, the Alcatel
Pop 2 (5) Premium ? I don't know if there's any ROM for that phone tho, but since it's branded as Alcatel you might get more support from the community here than by using Vodafone's name.
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Adreno306™ said:
Hello, Demonlord6.
I have tried to make a stock flashable ROM via dumping the system folder and the boot.img file, but without success.
It does not boot properly.. when I tried to flash it without dalvik/system wipe everything was as before.
When I tried to wipe /system and dalvik first and then flash the ROM, it causes bootloop.
So now I'm trying to fix this issue..
I don't know where the problem is.
So when this issue will be solved I will try to build a ROM from Alcatel phones with same specs.
Click to expand...
Click to collapse
Hey, Andreno306
I don't know much about Rom's in that level of expertise I'm afraid :/ but I did some digging and came across this simple tutorial on XDA:
http://forum.xda-developers.com/showthread.php?t=2387941
I imagine it does not work for every single device out there, at least not with modifying stuff after, but it might be a good starting point I think, in fact I would try to actually make one myself had I a working PC currently at home. But even if I did I had no way of testing it because this is currently my daily driver phone.
Just wanted to say that I'm also very interested in getting a slim ROM for this device. I can't offer any expertise I'm afraid! Just wanted to show that there are people interested in your project.
:highfive:
Stock Kernel
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
vojta_horanek said:
Thanks, it works great.
This is little off-topic but does anyone has the stock kernel, i flashed NeoKernel but it is not that good and i forgot to make a backup do can anyone please link me to the stock kernel?
Click to expand...
Click to collapse
I have one
https://mega.nz/#!tMJD3B4T!f6m2ELYCVupqGCcN2aGbkrNzEqijLu7au-7usEfeVL0
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Demonlord6 said:
I have one
But I recommend to restore it with the flashify app, because that's how the backup was made.
If, for some reason, you don't/can't restore it, then you can always try Sugar on the PC which basically restores everything to factory settings (recovery, kernel, etc, it all gets reset)
Click to expand...
Click to collapse
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
vojta_horanek said:
Restored and my phone keeps turning off after boot(once i saw the turn off screen, other times it just vibrates at boot screen), isnt it the wrong file? (flashed wia flashify)
I was able to restore the boot from TWRP (lucky i made a backup this time)
Click to expand...
Click to collapse
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Demonlord6 said:
Sorry there about the bootloop but glad u could restore it from TWRP, maybe it was because we have different ROM versions ?
Click to expand...
Click to collapse
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
vojta_horanek said:
I got this one: http://www.needrom.com/download/vodafone-smart-prime-6-vf-895n-debloatedclean-stock/#
Click to expand...
Click to collapse
Yeap, that's not the same version as my ROM, mine is not 130FNN etc. Maybe that's why it didn't work
Enviado do meu GT-S5280 através de Tapatalk
Sorry for the stupid question but... does it works on Smart Prime 7 too?
Has anyone installed that linked ROM? It seems to be what we are looking for... a slim debloated rom.
I presume we need to be rooted, install this TWRP, then flash that ROM?
It mentions unlocking the bootloader, I dont think I've seen any info anywhere about unlocking the bootloader.
Can anyone give a quick lowdown on all the steps required to install that ROM please?
Hi everyone, I discovered that Elephone Trunk and Smart Prime 6 have (almost) identical specs: https://www.devicespecifications.com...ison/c584481c6
So it would be great to "port" (or build ?) the official Nougat-OmniROM for Trunk to VF-895N: http://dl.omnirom.org/trunk/
Last but not least, here's official Vodafone Smart Prime 6 sources: Vodafone_Smart_prime_6_20150413.tar.xz
TWRP for vodafone smart max 4 990N (coolpad 8890u).
I tried this recovery image for vodafone smart max 4 990N (coolpad 8890u).
The phone is in a bootloop state. I think i have usb debugging enabled already.
So, in fastboot mode i can see the device in my pc in adb fastboot cmd.
Im trying to ''fastboot boot recovery.img" but it stops in ''booting..''.
Dont know whats the problem but for sure i can not find a specific twrp image for this device.
If i enter fastboot oem device-info it says ''(bootloader) Device unlocked: true''.
Any ideas ?
hi i was wondering if you could share how you did this or if you can make one for the Vodafone smart n9 (VFD720) it would help a lot of people out looking for this
Needed to root a Vodafone Smart Prime 6 (VF 895N) (got it from a friend because it became unresponsive from all the updated google play stuff ) to get linux-deploy running. Just wanted to leave a big thank you here for Adreno306 for his TRWP 3.0.0-0. it did the job very well!
Only the procedure to get it installed differed quite a bit for me, since Flashify is no longer available.
I wanted to preserve boot and just flash trwp to recover, what worked quite well.
The first thing I did was to boot the phone manually in recovery mode (Power+Vol up) and reset it to factory settings from there. It takes a little while. Then follow the setup, go to phone settings, enable developer mode and set usb debugging. If "unlock oem" is not available there, reboot into recovery again, set unlock there and reboot into bootloader.
The prerequisites are adb and fastboot, both must work. Means adb devices and fastboot devices must show the phone. What can make problems under win10 as it sometimes does not detect the phone in bootloader mode. An actual google usb driver is needed, as provided by google.
For me adb worked well, but when rebooted into bootloader with adb reboot bootloader, fastboot didnt detect the phone. With the phone still connected, the windows device manager showed an unknown device with and exclamation mark (!). Right click, install driver, select driver manually, select driver from device list, mark all devices (first entry) and click "disk", then point to the usb driver director and select "ADB fastboot driver". ( A more comprehensive description is available here )
Once adb and fastboot detect the device, it is time to prepare it. Boot to system (normal operation) first. Make sure that the TRWP 3.0.0-0.img is renamed to trwp.img and then
adb reboot bootloader
fastboot devices
fastboot oem unlock
fastboot boot trwp.img
Now the phone should show the trwp menu, set it up to root the phone and install SuperSU. Reboot into bootloader and
fastboot flash recovery trwp.img
fastboot reboot
Verify with adb reboot recovery, you should see trwp now. Reboot to system.
Now finally go into the app selector, start SuperSU, and root the phone. SuperSu uses trwp recovery mode to install its image and root is done.
Again, big thanks for providing the TRWP image!
Adreno306™ said:
Hello guys.
I have successfully ported TWRP 3.0.0-0 for our Smart Prime 6.
It's 100% working !!
There are NO BUGS !! :good:
DOWNLOAD
NEW LINK: DOWNLOAD
________________________________________
How to install
Via app:
1) Download TWRP 3.0.0-0 from the link above and place it on internal storage of your phone.
2) Download Flashify app from Google Play Store.
3) Open Flashify app.
4) Grant root permissions.
5) Click "Recovery image" and then click "Choose a file"
6) Navigate to the folder where you placed TWRP 3.0.0-0 and choose the .IMG file.
7) Press "Yup!" button and wait.
8) After a while the phone will require reboot. So click "reboot" button.
9) Phone will reboot and automatically boot into TWRP, so you can press reboot to system.
10) Enjoy!
Special thanks to Oneb1t for modded .fstab file! :highfive:
edit: you can use Flashfire app too instead of Flashify, but it's not recommended, because the latest version of the Flashfire app is not flashing properly.
Click to expand...
Click to collapse
Hi, I would like to try your tutorial but I can't root this phone (which is an important step in the tutorial), is there any way someone could help me??
Thanks
Hello xda developers this is my second thread sorry for the first one that i made yesterday, I am having a problem with my lenovo k4 note a7010a48
after rooting successfully I proceed to flash rr 7.1.2 but did not flash the gapps now my problem is how to go back on recovery mode to start over again
I already used the power button followed by the volume up down buttons but it is not working like before it is nougat. I only need to get to recovery mode. Please help and thankyou in advance. More power
Does u have root access now and which version of rr u flashed
yes the phone is rooted already and flashed with rr 7.1.2 only need to open recovery mode which is I have no idea
Contact in telegram app 9032015333 I will tell u
i dont know that or how to do that can you teach me please thank you
I have the same issue. Can't enter into recovery and the phone is unable to start.
Same Issue || Don't Know How To Fix
Hi,
I am searching for a possible solution from a day. But could not find a working solution.
After successfully flashing RR-N-5.8.5 (Android N)
Unable to go into recovery.
PROBLEM DESCRIPTION:
1. When Press Vol Up + Vol Down + Power Up
2. Recovery is not loading up
3. Instead it goes in boot loop
4. Normal boot mode and fast boot mode are working perfectly fine
SOLUTIONS TRIED:
1. Flashing recovery again using fastboot mode
2. Flashing different recovery, i.e updated version of recovery
As all recoveries which were available were for marshmallow version. I am not sure but have doubt as android version is updated so the kernel so do recovery also become obsolete in this case ?
Any help is welcome and appreciated
Thanks
---------- Post added at 05:18 PM ---------- Previous post was at 05:12 PM ----------
jaineshjain said:
Contact in telegram app 9032015333 I will tell u
Click to expand...
Click to collapse
Whole concept of this platform is sharing your knowledge
Don't you think it would be better if you discuss here itself ?
jaineshjain said:
Contact in telegram app 9032015333 I will tell u
Click to expand...
Click to collapse
Whole concept of this platform is sharing your knowledge
Don't you think it would be better if you discuss here itself ?
for fastboot mode and for recovery mode yes i tried it also but thats the problem no recovery mode. I will wait for the solution when it comes i will just store my phone for a while.
Hi Developers,
Is it possible to reset the phone at hardware level? I can't even connect the phone to PC as it keeps on rebooting.
Please note: upgraded to Nougat and wanted to do the second recovery as suggested by mohancm in the post. When the phone rebooted (before flashing the second recovery), the problem started.
Please let me know if any one has a fix/workaround for the issue.
Thanks,
Srihari
1.Download TWRP recovery unzip files.
https://drive.google.com/file/d/0B1CKVcdcbHFPUzFCODVMN0ZfTW8/view
2.Now in folder TWRP\img\ there is the file recovery.img.
3.Download the second recovery for nougat recovery-Nougat.img and put in the TWRP\img folder.
https://androidfilehost.com/?fid=673368273298981920
4.Rename it as the original, recovery.img and replace it.
5.Then connect your phone to usb and select the 3th option from usb debugging message
"Transfer photos(ptp)"
6.run TWRP_Install.bat from TWRP folder
And you are done, had the same problem and I figure this solution, hope it will help.
I cannot locate the transfer photos(ptp)
ok I already done the part I am now on the recovery mode thanks. new problem of mine is after flashing the rom gapps and recovery after reboot it goes back to recovery mode did I miss something on flashing?
ok so i already passed this problem thanks for the help xda community thank you very much but I have this bootloop problem maybe I did a mistake flashing before rebooting sorry i am a noob in this kind of upgrade specially in mobile phones. I will be careful next time after I passed this problem I hope you will help me once again, my phone in bootloop is killing me.
I have same issue... I flashed gapps and my phone is working smoothly... The issue is i can't go into recovery mode... I tried some one tap reboot to recovery apps but all whats happening is phone restarting normally.
For those who can't access recovery mode. You were supposed to flash updated recovery image after flashing rrn rom.
Enter into fastboot mode by using adb shell.
Flash the updated recovery image
Now try rebooting into recovery.
Should work.
Worst case, restore by flashing stock rom using SP flash tools. And then start all over again.
If you face any issues ping me. Even I had faced this issue and fixed it after a lot of struggle. I can try to help you.
Or you could download Official Twrp App directly from play store, then find A3000 (Air Row) in 'select device' and flash that to recovery, (if your phone is rooted) then you are good to go, go to recovery mode and thats all, your twrp is now has been flashed.
Thank me later??
MisledMew said:
Enter into fastboot mode by using adb shell.
Flash the updated recovery image
Now try rebooting into recovery.
Click to expand...
Click to collapse
This really worked for me. Many thanks man.
Well it got me some time to find the right recovery image for my ROM so I decided to give you link for anyone going through the same.
My configuration at that time was: DotOS 1.2 and TWRP 3.1.1 (or so).
On the DotOS thread was enclosed link to wrong recovery image file (or its version was changed as of 28.12.2018) but after small investigation I found this file recovery-mohan-N.img.
Note: This recovery worked for TWRP and Android Nougat and I'm not an expert to suggest this will work for your case either.
Thank you again and have a nice time
firelmnt said:
This really worked for me. Many thanks man.
Well it got me some time to find the right recovery image for my ROM so I decided to give you link for anyone going through the same.
My configuration at that time was: DotOS 1.2 and TWRP 3.1.1 (or so).
On the DotOS thread was enclosed link to wrong recovery image file (or its version was changed as of 28.12.2018) but after small investigation I found this file recovery-mohan-N.img.
Note: This recovery worked for TWRP and Android Nougat and I'm not an expert to suggest this will work for your case either.
Thank you again and have a nice time
Click to expand...
Click to collapse
Glad it helped