PirateZ Stock Rom For Samsung J2LTE [J200G] - Samsung Galaxy J2 ROMs, Kernels, Recoveries, & Oth

PirateZ Stock Rom For Samsung Galaxy J2 [J200G]
Rom base : Stock [ J200GDDU2AQL1 ]
Status : Stable
*Its My First Post So Dont Know How To Represent It.
Features :
*Rooted with Magisk
*VoLTE
*Deodexed
*Zipaligned
*Tweaked
*More fast now
*More Cant remember now <<
HOW-TO Install the rom:
-Open TWRP Wipe data
-Advanced select Dalvik Cache,data,cache & system
-Then Install PirateZ Rom And reboot...
-Reboot will take 8-15min as its the first boot
DOWNLOAD :
https://drive.google.com/file/d/18jjzV-e_0sRX-p3FdKzrJe-Dpw8PzJ-A/view?usp=drivesdk
SCREENSHOTS :
https://drive.google.com/folderview?id=1D9-0ef_OcJNAF1UpwUJfw07aILDZ2LYz

What advantages from this rom ?? pls post some screenshots of your rom.

any screenshots and bugs?

Great and thanks bro ... Its so light ...
Sent from my [device_name] using XDA-Developers Legacy app

Can anyone please send me link for TWRP (sm-j200g). I can't find one!

Pawan.S 5277! said:
Can anyone please send me link for TWRP (sm-j200g). I can't find one!
Click to expand...
Click to collapse
Search for twrp j2lte on google you will get j200g recovery on twrp site and download the tar file and then flash it with odin

Could someone tell me the full guide step by step after flashing twrp its humble req
nikhilkv379 said:
Search for twrp j2lte on google you will get j200g recovery on twrp site and download the tar file and then flash it with odin
Click to expand...
Click to collapse
Plz tell me the full guide step after flashing twrp
Bcoz i dnt know what to do after flashing twrp

Prince6342 said:
Plz tell me the full guide step after flashing twrp
Bcoz i dnt know what to do after flashing twrp
Click to expand...
Click to collapse
Official twrp is ready ... Flash itu using odin tools..
Sent from my [device_name] using XDA-Developers Legacy app

Its stuck after installation completed successfully. No buttons responding. Should I force shutdown by removing battery or holding power button.
EDIT: Forced shutdown and rom booted normally.

Front camera issue
First of all,thanks for the ROM..
but my isnt working it says, "CAMERA ERROR". can you tell me the solution for this problem.
thanks in advance.

omi_v said:
First of all,thanks for the ROM..
but my isnt working it says, "CAMERA ERROR". can you tell me the solution for this problem.
thanks in advance.
Click to expand...
Click to collapse
Im working on it give me sometime to try to fix...
And if you can wait just flash an old stock rom the issue will b fixed....because after updating to latest stock rom the camera front camera not working for j2 users

Hi All,
This rom works perfectly on my Samsung J200M (dual sim 4G) a quick and easy way to install Android 6 on a this device, runs better than the original up-to-date Android 5 Samsung firmware.
(I have no issues with Camera/s GPS 4G etc everything working as expected)
Thanks.

omi_v said:
First of all,thanks for the ROM..
but my isnt working it says, "CAMERA ERROR". can you tell me the solution for this problem.
thanks in advance.
Click to expand...
Click to collapse
+1 in front camera on j200g
Great rom by the way

Hi, thank you very much for the rom. I am using it on J200G without any issues (including the camera). So it's totally bug free rom for me. In addition, with Apps2SD app and Emperor Tweaks (God Mod) tweaks my device running like it has 1.5 GB ram! Playing games never was smoother before. Many many thanks.

MerajBD said:
Hi, thank you very much for the rom. I am using it on J200G without any issues (including the camera). So it's totally bug free rom for me. In addition, with Apps2SD app and Emperor Tweaks (God Mod) tweaks my device running like it has 1.5 GB ram! Playing games never was smoother before. Many many thanks.
Click to expand...
Click to collapse
If you like my work just hit the thanks button and nothing else

I already did ;

Fisrt time after flash it turns on normally. Mobile working normally. not also the camera issue. But after a single power off it is showing me that (picture included). Even not charging. What shall i do now. Thank u.

anas sami said:
Fisrt time after flash it turns on normally. Mobile working normally. not also the camera issue. But after a single power off it is showing me that (picture included). Even not charging. What shall i do now. Thank u.
Click to expand...
Click to collapse
Have you unlocked your bootloader if yes then this problem will not occur. But now the frp lock showed up you have to flash the stock ROM again with the help of odin you can download the stock ROM from updato.com for your device this will fix frp lock you can also search how to fix frp Lock on YouTube

I think the fault is , I've turned off OEM unlock under developer settings by mistake. And now while I'm flashing the stock firmware I'm stuck at this (picture included). Please help me. what shall i do now... Thank you for your reply.

anas sami said:
I think the fault is , I've turned off OEM unlock under developer settings by mistake. And now while I'm flashing the stock firmware I'm stuck at this (picture included). Please help me. what shall i do now... Thank you for your reply.
Click to expand...
Click to collapse
Download the lastest stock rom then flash it. This will fix your phone
Here is the link for latest stock rom https://updato.com/firmware-archive-select-model?record=B80C16C008BC11E89F15FA163EE8F90B

Related

[Read before posting a Thread]General Q n A for Galaxy 3. Ask your problems here.

I have made this thread exclusively for Q and A on Galaxy 3. If you have some doubts, questions or need some help just mention it in this thread. I think this will be better than posting a new thread in the Development Section or General Section and you shall also get more attention if most of you co-operate to visit and share your questions and solve others problems.
Hope this Thread will be used for asking questions and searching answers.
So how many of you think this is the right thing. If you support me kindly start asking your questions (if any) here from the moment.
Good job, we missed this in general section i think
I'm looking for CSC file (I5800NEE) some time but no success. Where can I get it?
patseb said:
I'm looking for CSC file (I5800NEE) some time but no success. Where can I get it?
Click to expand...
Click to collapse
Did you try samfirmware?
Sent from my GT-I5800 using XDA App
Yes but that file isn't in stock rom package. On samfimware forum nobody answer so I asked here.
how to install cyanogen mod for samsung galaxy 3
i have rooted my phone yesterday. i want to install cyanogen mod. i tried installing by going into recovery mode but failed. can u give me the detailed procedure for installing the cyanogen mod in my samsung galaxy 3 i 5801?
akkidasvikranth said:
i have rooted my phone yesterday. i want to install cyanogen mod. i tried installing by going into recovery mode but failed. can u give me the detailed procedure for installing the cyanogen mod in my samsung galaxy 3 i 5801?
Click to expand...
Click to collapse
Please see that Cyanogen Mod is currently in Alpha stage and some modules are not working.
If you want to install it any way for testing purpose follow the link below then you download the ZIP File. After download completes extract the zip to obtain a TAR file. Fire up ODIN and Select the OPS as you and Flash as one package with the TAR image. After phone flashes up and boot. Wipe Data and Cache from the Recovery and reboot. You would be able to use CM7 Alpha5 Fix1.
Please See- You cant install CM7 without flashing and also see that you have a backup of your whole phone. Use titanium backup from market.
CM7 Download link- http://www.multiupload.com/Y3GTH2QN56
If you dont know how to flash please inform i will help you with the links.
If your problem is still not solved. Kindly quote my answer and tell me.
patseb said:
Yes but that file isn't in stock rom package. On samfimware forum nobody answer so I asked here.
Click to expand...
Click to collapse
I think it is not available on Samfirmware. I think we have to obtain from ROM Image of XXJPS.
I will help you out after searching.
I have one more problem with G3. It's vibration is very soft/gentle.
My old Samsung SGH-E900 had vibration like PlayStation's controller (very strong).
I know that using more battery but I want more power in vibration. Is it possible?
Vibration pattern doesn't help me.
Sorry for my poor english
android.aimad said:
Please see that Cyanogen Mod is currently in Alpha stage and some modules are not working.
If you want to install it any way for testing purpose follow the link below then you download the ZIP File. After download completes extract the zip to obtain a TAR file. Fire up ODIN and Select the OPS as you and Flash as one package with the TAR image. After phone flashes up and boot. Wipe Data and Cache from the Recovery and reboot. You would be able to use CM7 Alpha5 Fix1.
Please See- You cant install CM7 without flashing and also see that you have a backup of your whole phone. Use titanium backup from market.
CM7 Download link- http://www.multiupload.com/Y3GTH2QN56
If you dont know how to flash please inform i will help you with the links.
If your problem is still not solved. Kindly quote my answer and tell me.
Click to expand...
Click to collapse
thankyou. done it successfully...
akkidasvikranth said:
thankyou. done it successfully...
Click to expand...
Click to collapse
you are welcome.. And thank you too. You save one thread and still got your problem solved. Isnt that great?
HI everybody...i have data2sd activate on my galaxy 3 (kyrillos v7) and i want to know how can i move Widgets to the ``true`` internal memory...cuz every time when i connect my phone with my pc my widgets disapear...and i need to reactivate again...Anyone know how to solve my problem?
ghiurtuv said:
HI everybody...i have data2sd activate on my galaxy 3 (kyrillos v7) and i want to know how can i move Widgets to the ``true`` internal memory...cuz every time when i connect my phone with my pc my widgets disapear...and i need to reactivate again...Anyone know how to solve my problem?
Click to expand...
Click to collapse
You can t until you disable data2sd. And how do your widgets disappear?? The app or the widget will be in SD-ext partition. Which is not detected by windows.
i think is a launcher problem i will try something right now..i `ll tell you if it`s works
edit: problem solved i was on go launcher ex and i put him to internal right now..(ext)
can anyone tell what is busybox and what its function...?
i find the busybox in market too..
hadi_xman said:
can anyone tell what is busybox and what its function...?
i find the busybox in market too..
Click to expand...
Click to collapse
Quote Wikipedia, "BusyBox provides several stripped-down Unix tools in a single executable. It runs on top of the Linux kernel just as does Gnu/Linux. It is ideally suited to run in embedded devices. It has been self-dubbed "The Swiss Army Knife of Embedded Linux".".
Basically it is a tool which allows you to perform certain functions.
Eg : - Changing permissions.
camera issue in cyanogen mod
i have installed cyanogen mod alpha 5 fix1 in my samsung galaxy 3 i5801 but there is a camera issue. when i open the camera app a white screen appears instead of the video and also the video player showing black screen.can anyone fix this?
akkidasvikranth said:
i have installed cyanogen mod alpha 5 fix1 in my samsung galaxy 3 i5801 but there is a camera issue. when i open the camera app a white screen appears instead of the video and also the video player showing black screen.can anyone fix this?
Click to expand...
Click to collapse
Well Cyanogen Mod is still in alpha stage as the title suggests. And the camera driver is still not functional. It will be fuctional in the final build.
patseb said:
I have one more problem with G3. It's vibration is very soft/gentle.
My old Samsung SGH-E900 had vibration like PlayStation's controller (very strong).
I know that using more battery but I want more power in vibration. Is it possible?
Vibration pattern doesn't help me.
Sorry for my poor english
Click to expand...
Click to collapse
Ye somewhere in setting you can increase it but dunno exact were
Sent from my GT-I5800 using XDA App
patseb said:
Yes but that file isn't in stock rom package. On samfimware forum nobody answer so I asked here.
Click to expand...
Click to collapse
Its included in XXJPS
Sent from my GT-I5800 using XDA App

[OFFICIAL][4.4.x] Omni Rom Discussion thread

Hello there awesome people of xda, this is the discussion thread for Omni Rom for i9100. I decided to make this topic because of the spam that is on the development thread.
NOTE THAT BY FLASHING OMNI ROM OR ANY OTHER FORM OF CUSTOM FIRMWARE, RECOVERY YOUR WARRANTY IS VOIDED. I, MYSELF OR ANY OTHER MEMBER OF OMNI, TWRP, AOSP ARE NOT RESPONSIBLE FOR ANY DAMAGE YOU MAY CAUSE TO YOUR DEVICE. READ THE INSTRUCTIONS AND NOTE ALSO THAT YOU WILL FLASH THIS CUSTOM FIRMWARE AT YOUR OWN RISK.
Click to expand...
Click to collapse
Good ROM, except some kernel issues in latest nightlies.
so what's the difference between this Rom and say CM 11 or PA?
is it features only or it's based on a different source?
xman323 said:
so what's the difference between this Rom and say CM 11 or PA?
is it features only or it's based on a different source?
Click to expand...
Click to collapse
is not ported, its based on AOSP and also has futures like multiwindow, app swich etc.
Great ROM, been using since it first came out and using every update as available!
I wasn't one of the lucky ones where the new nightlies work, is there any update on what's causing the issues and when this will be sorted?
Thanks
Just seen the thread trying to find the issue, so don't bother answering that question!
Where can I find the battery icons
In battery.
Envoyé de mon GT-I9100 en utilisant Tapatalk
torned said:
In battery.
Envoyé de mon GT-I9100 en utilisant Tapatalk
Click to expand...
Click to collapse
thanks that save me some time
Does Camera Work okay?
Hi, does the front facing camera recording work. Also is the camera slow to take pictures?
Easily one of the best custom ROM for our old S2. Really love the multi-windows feature.
issues
i have an issues
when i try to install the recovery 6.0.4.5 i got "installation aborted" message at the end
mine is 6.0.2.7 and it won't install the rom unless i update it to 6.0.4.5
i tried other links for the 6.0.4.5 it did install in the recovery mood bt when i rebort the system my phone will lag in the samsung logo
and when i try to go to recovery mood it didn't go it just stuck in the logo
so i went back to odin to install 6.0.2.7 again and the phone worked
i also found a "tar" version for 6.0.4.5 to install it in odin
bt when i did i got a root message and stuff i didn't understand so i shut it down and went back to 6.0.2.7 again
anyone with the same problem ?
sorry for my bad english i am not that good
bt well i tried D:
Latest nightly builds must be perfect. Haven't seen anyone post here for ages, unless there is a new thread for the i9100 international?
Sent from my GT-I9100 using xda app-developers app
I Love It!
Great rom. thx Omni Team.
is there any way to turn off the light of menu & back key?
k4mr4n94 said:
Hi, does the front facing camera recording work. Also is the camera slow to take pictures?
Click to expand...
Click to collapse
works
soma47 said:
i have an issues
when i try to install the recovery 6.0.4.5 i got "installation aborted" message at the end
mine is 6.0.2.7 and it won't install the rom unless i update it to 6.0.4.5
i tried other links for the 6.0.4.5 it did install in the recovery mood bt when i rebort the system my phone will lag in the samsung logo
and when i try to go to recovery mood it didn't go it just stuck in the logo
so i went back to odin to install 6.0.2.7 again and the phone worked
i also found a "tar" version for 6.0.4.5 to install it in odin
bt when i did i got a root message and stuff i didn't understand so i shut it down and went back to 6.0.2.7 again
anyone with the same problem ?
sorry for my bad english i am not that good
bt well i tried D:
Click to expand...
Click to collapse
use a kernel that comes with a recovery like Dorimanx
hoschool2 said:
is there any way to turn off the light of menu & back key?
Click to expand...
Click to collapse
there should be an options in the Settings, Buttons or smth like that.
Camera pic to external sd
I like this ROM, Thanks for the Team.
How to set default location of camera to external sd.
moula1981 said:
I like this ROM, Thanks for the Team.
How to set default location of camera to external sd.
Click to expand...
Click to collapse
is hould be an option in the camera app
When multi window implement in omni kat ROM. Someone patch this to use http://forum.xda-developers.com/showthread.php?t=2567667

Succefully instaled noble note 4 rom!!

As the title says, i managed to install to my N915FY the "NOBLE Note 7 Edge UX 3.0" rom..Rom is working fine anf fast, testing it now ,camera has a few issues ,but the new fresh look of the rom is great.
Link or the rom here http://forum.xda-developers.com/note-4/snapdragon-dev/rom-noble-rom-t3392289
I dont know if it will work for you,but i will explain what i did:
Of course i was in MM 6.0.1 stock ,rooted and with TWRP.Flashed Mickey387 latest [v2.0] and played a bit.Then did ALL wipes and flashed NOBLE rom.After finished flashing,rom didnt boot and stuck at Samsung logo.
Then booted again to recovery and flashed lastest Mickey387 kernel.
After 5-8 minutes rom booted fine and made my setup.
That's it ,didnt flashed bootloader or modem, till now all fine ,testing more but as i said before its a new ,fresh look for my edge.
Try it yourselves but take your backup always.
Wow, thanks for information, maybe later i try.
Please attach a few screenshots...
UPD: thanks for screenshots
In this rom do you have a stock bluelight filter ? like note7 ?
You must test this one my bro http://forum.xda-developers.com/note-4/snapdragon-dev/rom-t3440223
Naoufalstitou said:
You must test this one my bro http://forum.xda-developers.com/note-4/snapdragon-dev/rom-t3440223
Click to expand...
Click to collapse
Did you tried that rom ,mate?I have already download it to test later..
xenkato said:
Did you tried that rom ,mate?I have already download it to test later..
Click to expand...
Click to collapse
As i read that thread too much bug in that atm. It worth to wait some weeks a better release, i think...
yarik88 said:
Wow, thanks for information, maybe later i try.
Please attach a few screenshots...
UPD: thanks for screenshots
In this rom do you have a stock bluelight filter ? like note7 ?
Click to expand...
Click to collapse
No ,only outdoor mode ,no bluelight filter.
-----------
The developer has posted his rom for the NOTE EDGE here: http://forum.xda-developers.com/note-edge/development/rom-nobel-rom-t3441769
cudos to him and his work he has done a very nice effort [Albe96].
All discussions about the rom should post there.
Thanks Albe96!!
do you have edge panel features, spen, nfc and bluetooth after installing that rom?
actually in general, my question is can we flash n910g to n915g?
Works very good. It's fast and smooth and stable on my Note 4 (910f).
erwinsie said:
do you have edge panel features, spen, nfc and bluetooth after installing that rom?
actually in general, my question is can we flash n910g to n915g?
Click to expand...
Click to collapse
Answer is in this thread
http://forum.xda-developers.com/note-edge/help/flash-note-4-rom-note-edge-t3272906
Sent from my SM-N915L using XDA-Developers mobile app
The permissions for apps keep on resetting on every boot.

[Rom][7.0] Android Nougat (AOSP) for Explay Fresh and clones..

Version of Android - 7.0
Kernel Version - 3.10.54
Firmware based on AOSP (real nougat)
bugs: No root
It does not work the mobile Internet
No radio
Does not work the video recording.
Video Decoding
Attention
1) After the first turn do not enter into your Google account to complete the configuration without it.
2) Go to "Settings> Applications> Google play services", set all the permissions.
3) Do the same thing-with the Play market application.
4) Open the market and go under your account, everything should work.
link - https://yadi.sk/d/cHeC3dG4w3jWp
ported from here: http://4pda.ru/forum/index.php?s=&showtopic=606941&view=findpost&p=53669133
thanks:
Qwanor
max127328
Chaiko Dima
Zormax
fx-mod
hvrj said:
Version of Android - 7.0
Kernel Version - 3.10.54
Firmware based on AOSP (real nougat)
bugs: No root
It does not work the mobile Internet
No radio
Does not work the video recording.
Video Decoding
Attention
1) After the first turn do not enter into your Google account to complete the configuration without it.
2) Go to "Settings> Applications> Google play services", set all the permissions.
3) Do the same thing-with the Play market application.
4) Open the market and go under your account, everything should work.
link - https://yadi.sk/d/cHeC3dG4w3jWp
ported from here: http://4pda.ru/forum/index.php?s=&showtopic=606941&view=findpost&p=53669133
thanks:
Qwanor
max127328
Chaiko Dima
Zormax
fx-mod
Click to expand...
Click to collapse
What you mean by phone Internet doesn't work. Is it WiFi or data that doesn't work.
Any news bout this rom
ilmentor said:
Any news bout this rom
Click to expand...
Click to collapse
There's a new update on 11/30 if you're still interested:
https://yadi.sk/d/KIy4x9-dzp3sY
What's new:
(translated)
*** 30.11.2016 [UpdatePatch v1.0] ***
Fixed video playback.
Accelerated connection to satellites.
Deleted radio, because it only caused problems), how to fix, Replace))
Added the browser.
Removed Launcher3.
Added Pixel launcher and Google wallpaper.
Click to expand...
Click to collapse
Source
Thanks will test it.
ilmentor said:
Thanks will test it.
Click to expand...
Click to collapse
Any stable android 7.0 rom u have tried ?
ffun735 said:
Any stable android 7.0 rom u have tried ?
Click to expand...
Click to collapse
I'm only aware of this one and a cm14 but both are far from stable. The most problem on both is data, it ain't working.
ilmentor said:
I'm only aware of this one and a cm14 but both are far from stable. The most problem on both is data, it ain't working.
Click to expand...
Click to collapse
I want to use it for few days to experience android 7. Should i go for it or wait for a stable build ? Also , i am on wiko , android 5 stock rom . My device is unrooted and without any twrp , so what to flash and any guide for that ??
ffun735 said:
I want to use it for few days to experience android 7. Should i go for it or wait for a stable build ? Also , i am on wiko , android 5 stock rom . My device is unrooted and without any twrp , so what to flash and any guide for that ??
Click to expand...
Click to collapse
I would advice you to wait a more stable build. You can't even make a call with this build. But if you still wanna test it give us more info bout your device. What wiko model.
ilmentor said:
I would advice you to wait a more stable build. You can't even make a call with this build. But if you still wanna test it give us more info bout your device. What wiko model.
Click to expand...
Click to collapse
Oh , then i would wait for a few days for the rom to become more stable . And i have Micromax Canvas a120 but i flashed the wiko rainbow official lp update using this app / rom -- http://forum.xda-developers.com/mic...cromax-a120-official-lollipop-update-t3245549
ffun735 said:
Oh , then i would wait for a few days for the rom to become more stable . And i have Canvas a120 but i flashed the wiko rainbow official lp update using this app / rom -- http://forum.xda-developers.com/mic...cromax-a120-official-lollipop-update-t3245549
Click to expand...
Click to collapse
Yeah you should wait but it's gonna take some time.
For the root and recovery of your phone they are explained in the topic you linked. Just use kingroot to root it and there is a recovery in the topic you linked.
I have try to root this rom wide kingoroot, root genius, unlock root and UPDATE-SuperSU-v2.76, but every time i try, the smartphone reboot and stay at boot loop, any sugestion? I have a wiko rainbow 4gb.
leandro-brandao96 said:
I have try to root this rom wide kingoroot, root genius, unlock root and UPDATE-SuperSU-v2.76, but every time i try, the smartphone reboot and stay at boot loop, any sugestion? I have a wiko rainbow 4gb.
Click to expand...
Click to collapse
There is no root for this rom yet. It is stated in the original thread.
Btw did mobile data work for you?
ilmentor said:
There is no root for this rom yet. It is stated in the original thread.
Btw did mobile data work for you?
Click to expand...
Click to collapse
Unfortunately no, but alredy have a fix for that?
And also, i can`t remove virtual keys, any sugestion?
leandro-brandao96 said:
Unfortunately no, but alredy have a fix for that?
And also, i can`t remove virtual keys, any sugestion?
Click to expand...
Click to collapse
Sorry have no idea. And if you have a fix for the mobile data plz share.
There is a cm14 for explay fresh too if you wanna try it.
ilmentor said:
Sorry have no idea. And if you have a fix for the mobile data plz share.
There is a cm14 for explay fresh too if you wanna try it.
Click to expand...
Click to collapse
Please, can you share the link? I`m more used to work wide cyanogen, and maybe i can fix some bugs of cm.
About the mobile data, i have try, but no fix yet.
leandro-brandao96 said:
Please, can you share the link? I`m more used to work wide cyanogen, and maybe i can fix some bugs of cm.
About the mobile data, i have try, but no fix yet.
Click to expand...
Click to collapse
http://forum.xda-developers.com/mic...ogenmod-14-nougat-alpha-explay-t3463738/page2
If you fix some bugs plz share. Specially the mobile data.
ilmentor said:
http://forum.xda-developers.com/mic...ogenmod-14-nougat-alpha-explay-t3463738/page2
If you fix some bugs plz share. Specially the mobile data.
Click to expand...
Click to collapse
Thanks man

[Share] OFFICIAL Mokee 9.0 (android pie) nightly non treble for Zte Nubia Z11 nx531j

Until Few Days back i was almost certain that My Z11 will be on android Nougat till its last charge but thanks to our great Devs i was wrong(gladly)
Behold... official Mokee 10.0 for our beloved mighty Nubia Z11
I am sharing this link so that more users can experience it. Make sure you are on twrp given below before installing the rom else it wont boot.
Rom is almost bug free and could be used as daily driver.
Clean install is suggested.
Gapps are not included, please download required pack from: https://opengapps.org/
Rom Download: https://download.mokeedev.com/?device=nx531j
Twrp: https://drive.google.com/open?id=1vZ8_FOGjuYRPHrVIHpYbGKfWZbjhjSYf
Flash audio fix last from twrp
Again none of above ia my work i am just sharing the fabulous work of Great Devs
How to install
1. Download all files mentioned above
2. Put everything in sd card/ otg pendrive
3. Flash the TWRP given above
4. Reboot in TWRP and format data
5. Wipe System, Data, Dalvik & cache
6. Flash Rom then Gapps
7. Reboot and enjoy your Z11
Edit: Audio is fixed now, some users suggested that battery performance is slightyy better now.
Vi7eta said:
Few Days back i was almost certain that My Z11 will be on android Nougat till its last charge but thanks to our great Devs i was wrong.
Behold... official Mokee 9.0 for our beloved mighty Nubia Z11
I am sharing this link so that more users can feast upon it. Make sure you are on twrp given below before installing the rom else it wont boot.
Rom is released Recently and its a nightly build still.. Other then Audio bug (fix will be found below) and broken IR (no fix yet) haven't found any issue in last 24 hours Rom is almost bug free and could be used as daily driver.
Clean install would be suggested.
Gapps are not included, please download required pack from: https://opengapps.org/
Rom Download: https://download.mokeedev.com/?device=nx531j
Audio Fix: https://androidfilehost.com/?fid=1395089523397917582
Twrp: https://drive.google.com/open?id=1vZ8_FOGjuYRPHrVIHpYbGKfWZbjhjSYf
Flash audio fix last from twrp
Again none of above ia my work i am just sharing the fabulous work of Great Devs
How to install
1. Download all files mentioned above
2. Put everything in sd card/ otg pendrive
3. Flash the TWRP given above
4. Reboot in TWRP and format data
5. Wipe System, Data, Dalvik & cache
6. Flash Rom then Gapps and lastly audio fix
7. Reboot and enjoy your Z11
Click to expand...
Click to collapse
Thank you for sharing , would you mind to give a quick Guide
on how to flash Trwp , i have never flashed anythink but Stock
Roms on that Device .
Thanks in advanced !
fares70 said:
Thank you for sharing , would you mind to give a quick Guide
on how to flash Trwp , i have never flashed anythink but Stock
Roms on that Device .
Thanks in advanced !
Click to expand...
Click to collapse
Go through this page, you will find everything you are looking for.
https://4pda.ru/forum/index.php?s=&showtopic=782022&view=findpost&p=60483845
Be cautious if you flash Mk90.1 2019318, an user got bootloop.
I flashed the latest Mokee (19/03) with Micro Gapps for Android 9.0 and it seems to work fine.
The only problem I have is that the power button launches the camera and there's no way to disable this annoying feature.
valorien said:
I flashed the latest Mokee (19/03) with Micro Gapps for Android 9.0 and it seems to work fine.
The only problem I have is that the power button launches the camera and there's no way to disable this annoying feature.
Click to expand...
Click to collapse
Settings>system>gesture>jump to camera>off
Lemme know if the annoyong feature still persists.
Vi7eta said:
Settings>system>gesture>jump to camera>off
Lemme know if the annoyong feature still persists.
Click to expand...
Click to collapse
That solved it! thank you so much! It was driving me crazy all day.
Have you encountered any other issues with the ROM? I'm seeing random shutdowns/black screen every now and then.
Guess it's still unstable.
valorien said:
That solved it! thank you so much! It was driving me crazy all day.
Have you encountered any other issues with the ROM? I'm seeing random shutdowns/black screen every now and then.
Guess it's still unstable.
Click to expand...
Click to collapse
After every manual reboot it shuts itself off once but after force power on it stays on, if you use pin/password then do this..
after reboot give 1 second pause between entering each digit and let it settle for a minut.
Yes its still in beta but its the best thing till date Z11 got.
Even Nubia coudnt/woudnt offer 2 major update but our devs give it a new lease of life.
Vi7eta said:
After every manual reboot it shuts itself off once but after force power on it stays on, if you use pin/password then do this..
after reboot give 1 second pause between entering each digit and let it settle for a minut.
Yes its still in beta but its the best thing till date Z11 got.
Even Nubia coudnt/woudnt offer 2 major update but our devs give it a new lease of life.
Click to expand...
Click to collapse
Unfortunately, it still randomly shuts down or resets.
I'm appreciative of the fact that someone put time and effort to develop this ROM, but it's just too buggy at the moment to serve as a real alternative.
Users at the 4PDA forum (where this ROM originates from) report similar issues.
In the meantime, I'm going back to 3.06.
valorien said:
Unfortunately, it still randomly shuts down or resets.
I'm appreciative of the fact that someone put time and effort to develop this ROM, but it's just too buggy at the moment to serve as a real alternative.
Users at the 4PDA forum (where this ROM originates from) report similar issues.
In the meantime, I'm going back to 3.06.
Click to expand...
Click to collapse
As i mentioned its in beta i too am using it as my secondary driver.
Though i havent faced random shut downs but i apreciate you tried the rom and reported the issues.
Please share exact steps you took while flashing mokee.
Thank you, I am using it now, very good rom
洛父110 said:
Thank you, I am using it now, very good rom
Click to expand...
Click to collapse
Good to hear that you having a great ride with mokee.
im getting error:7 in twrp mine is 128+6gb signature gold edition and i really dont know what to do
i need help
Basically there is no restart now, it can be used daily, very good work.
SolidSnake140 said:
im getting error:7 in twrp mine is 128+6gb signature gold edition and i really dont know what to do
i need help
Click to expand...
Click to collapse
Did you flash mentioned twrp first?
If yes then re-download the rom file and try again, it should work.
Vi7eta said:
Did you flash mentioned twrp first?
If yes then re-download the rom file and try again, it should work.
Click to expand...
Click to collapse
actually i did not, i have a twrp 3.0.2.0 i will update it but idk it should have the same functionality after all its a recovery , what will change if i didnt update ?
SolidSnake140 said:
actually i did not, i have a twrp 3.0.2.0 i will update it but idk it should have the same functionality after all its a recovery , what will change if i didnt update ?
Click to expand...
Click to collapse
twrp 3.0.2.0. dosent support pie.
battery performance?
洛父110 said:
Thank you, I am using it now, very good rom
Click to expand...
Click to collapse
how is the battery performance, compared to the official ROM?
Good rom no hanging but it's over heating in gaming and getting shut down when gaming under 40 battery
jdigra said:
how is the battery performance, compared to the official ROM?
Click to expand...
Click to collapse
Almost same. Although depends on usage.. You might want to try it for yourself to get exact results.

Categories

Resources