My H2 unlocks the watch when it is fully charged. Does it happen to anyone? How do you disable that?
Related
I'm using right now the CM 9.1 Android ICS 4.0.4 ROM and I'm still having the same issue as I did on WM 6.5.
I even bought a new battery but my problem still remains.
+++++++++++++++
It's the next situation:
When I charge my Hd Mini sometimes the phone gets stuck and doesn't charge anymore, than I have to disconnect the cable and plug it back in and then it starts charging again.
The phone won't charge for the fully 100%, don't know why but when I disconnect the cable and make on phone call the battery drops (in example) from 70% to 45% very odd.
+++++++++++++++
My question is does anybody else have or had the same issue and is it fixable and how?
Thanks in advance!
I really recommend to do that, Go to Settings> Developer> Select [Stay awake] +
This won't turn off when you charge it, So this will help you (also it's already written in my pages).
And remember, the Battery Percentage % lies, for example if 90% means about 87% to 92%. after fully charge it should tell you (Battery Charged).
iPlasm said:
I really recommend to do that, Go to Settings> Developer> Select [Stay awake] +
This won't turn off when you charge it, So this will help you (also it's already written in my pages).
And remember, the Battery Percentage % lies, for example if 90% means about 87% to 92%. after fully charge it should tell you (Battery Charged).
Click to expand...
Click to collapse
Thanks will try that
Hello friends!
I have charging problem with my S8 plus with...Everything was fine before i upgraded from LightRom Oreo to LightRom Pie. Than i realized that i dont like Pie rom than i revert it again to Oreo. Than suddenly i sow when i charging my phone it wont charge more than 80%, sometimes 74% or 70%. I have installed Battery charge limit app but without help. When i turn phone of it charge it properly 100%.
Does anyone have solution...?!
Delete the app. ???
That's what it's designed to do stop charging.
If not that make sure your device is not over heating Samsung has implented charging limits for over temps
I have deleted app long time before
No overheating, no games, actually i dont use phone much...
TheMadScientist said:
Delete the app.
That's what it's designed to do stop charging.
If not that make sure your device is not over heating Samsung has implented charging limits for over temps
Click to expand...
Click to collapse
I didnt solved but now im back on stock Rom so everything is fine
Hi. I switched phones and had to factory reset my TW PRO. Since the restart my battery life is horrible. I used to lose 8% overnight and now I lose 30. I get up with only 70% and it barely lasts until noon. I thought this might be a watch face / software related issue so I factory reset it again and this time didn't install anything, but still have the same results. Yesterday I put it in essential mode before going to bed and I lost 35% overnight so this is probably not a software issue. In addition, in the wearOS app on my phone in the battery info I see only screen and idle OS which don't add up to the total of used battery. The watch was purchased in 07/2019. Any ideas on what could be the problem and what should I do? Perhaps my watch battery is falsely signaling that it is fully charged (and then stops charging even if it is connected to the charger) even though in fact it has only reached about 30%. Is there any way to reset the battery / battery statistics? Any way/app to show the accurate charge level in fact?
Install ROM from [ROM+KERNEL+TWRP][Ticwatch Pro(Catfish)(Catshark 4G)]+[Ticwatch C2(Skipjack)[28-Jan] by janjan.
Check it con this forum.
jlvlnzl said:
Install ROM from [ROM+KERNEL+TWRP][Ticwatch Pro(Catfish)(Catshark 4G)]+[Ticwatch C2(Skipjack)[28-Jan] by janjan.
Check it con this forum.
Click to expand...
Click to collapse
Thanks, although since it happens in essential mode I'm not sure it's a software issue.
Will it cancel my warranty? Because I might have to use it in the end.
Hello guys,
Do you have any info about this feature.
Seems work well first days.
When I plugged my phone, charging stopped at 80 and 2hours before I wake up the phone was fully charged.
Yesterday night woke up at 4am (was thirsty ?) and phone was already fully charged..
Anyway, do you guys have any info how it works exactly or how to configure it !
Thanks a lot
Cheers
Appreciate the gesture and what it's trying to do, but it is in fact relying on very small components to deliver on a critical part of your device.
My advice, don't charge overnight on any phone, ever. You will develop issues, it's not a question of if it's when.
Your standby drain will last the night losing only a couple of % so why charge overnight?
Turn off optimised charge and let warp do is job.
100% in less then an hour 1-2% overnight loss.
No need for optimised charging at all.
When I had it enabled, it would stop charging at 80% and would start again I think an hour before my alarm. I didn't do any additional configuration, I think it just "learns" your behaviour over time.
I don't have it enabled anymore, though. Like the user mentioned above, warp charge doesn't require overnight charging. I am at about 50% when I wake up and get to 90% in the morning very quickly!
Thanks guys.
Yeah that's what I was thinking as well.
Just wanted to know if someone has more info on this obscure option ?.
Warp charge speed is all I need ??
Yeah sure this warp charge is a blast
Hi, i've owned a ticwatch pro for few years now.
From 3 months ago it started to show "50%" and remain stuck at this % since then.
No matter what i do the problem still there, i've tried to wipe it, install custom rom and rooting it to access his system dump file, even disassembly it but i can't find any problem other then a software related issued.
Using the dumpsys command i can see the watch still reading no matter how charge the battery is 3.710 voltage.
Swap battery, charged to 4.3 and still 50% dumsys 3.7v
Perfoming a dumpsys reset change nothing.
Have anyone found a solution for that?
P.s. charger is ok, watch charge at 0.4A all the time, i think what stop the charging process is the battery bms cutting off due to overcharge protection and not the watch itself.