Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This Project is not made by me, it's made by one of our Great XDA Dev @AdrianDC , I'm just sharing it here
Here is a original post https://forum.xda-developers.com/an...mod-low-ram-property-patcher-android-t3737373
Please visit & give a thanks to dev if you like this project
About the project
Low-RAM Property Patcher is made to give Android Oreo users an easy control
over the low-ram property from the Go configuration, responsible for the UI changes of Go.
Its purpose is to simply enable or disable the low-ram property from the build.prop,
but also to retain this user decision through the ROM upgrades (new releases, OTA)...
Users just need to flash the patcher to enable or disable the low-ram property on their system,
and to ensure the future ROM upgrades will retain this choice, just like GApps thanks to backuptool.
Developers should get less requests to compile with or without Go just because one user
wants to have a feature (multitasking for example) re-enabled or to force low-ram changes.
The target system is Oreo, but the low-ram property was introduced since Android KitKat 4.4,
therefore it should work on other versions, unless the ROM developers (official Stock OEM, custom ROMs, ...)
did not validate the low-RAM UI changes (recent apps UI mostly) against the additions they made.
Features affected by the low-ram property: Flat recent / multitasking UI,
multi-users disabled, high-end graphics disabled, less recent apps cache,
multi-windows disabled, minor notification icons changes, less logger buffer sizes (devs),
no apps notifications access / zen access / VR listeners / picture in picture (PIP) accesses.
Downloads (Custom / patched ROMs only)
android_lowram_[enabler/disabler].zip : Mod Edit: Link Removed
Source code
Project sources: Standalone scripts built around backuptool
Low-RAM Property Patcher created also thanks to :
- Everyone involved in testing it
XDA:DevDB Information
Low-RAM Property Patcher, Tool/Utility for the Android General
Contributors
AdrianDC
Version Information
Status: Stable
Created 2018-01-18
Last Updated 2018-01-21
Reserved
rahul9999 said:
Reserved
Click to expand...
Click to collapse
Do you have the permission from @AdrianDC to mirror his work and copy his OP like this here?
Thread closed per OP request
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Nightly builds? Auto compiled builds of the latest CyanogenMod source from github. This version change each night and aren't officialy supported. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).:good:
My builds uses all official CyanogenMod sources except the kernel. But I am merging it with all fixes/features from CM kernel repo, Google and kernel.org mainline too.
Downloads
Latest HumberOS: N8000 | N8010/3
Google Apps: http://goo.im/gapps
Installation
- First time flashing CM10.1 to your device (or coming from another ROM)?
Root your device and install CwM Recovery* or TWRP.
Reboot into Recovery
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using CwM Recovery* or TWRP
* Check troubleshooting if you are using CwM Recovery.
FAQ
Please read before posting or reporting bugs!:good:
Troubleshooting
HERE
Reporting Bugs
Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Please read the thread for known issues before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Tablet model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
----------------------------------------------------
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
----------------------------------------------------
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
----------------------------------------------------
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
IRC
User channel
#teamhacksung-support
Developer channel
#teamhacksung
#cyanogenmod-dev
Development
HumberOS development thread
Changelog?
A rough changelog is available HERE
Kernel TAGs: HERE
RSS
If you want to be notified by the new builds just install GooManager or add http://goo.im/rss&path=/devs/humberos to any RSS reader.
All Sources
HumberOS
CyanogenMod
______________________________________________________________
The CyanogenMod team would like to THANK everyone involved
in helping with testing, coding, debugging enting!
Enjoy!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What are UNOFFICIAL builds? A version of CyanogenMod not compiled by CyanogenMod's build servers and may contain code not yet committed to the repository. If you find bugs/issues you can/must discuss here (do not submit nightlies bug on CyanogenMod issue tracker).
<Downloads>
ROM: LINK (20131129)
Gapps: LINK , XDA Thread
<First Build>
-CM11.0 codebase of 28-Nov
Notable Changes I see on that build, is that AOSP Dialer has de the new Kit Kat Dialer Icon.
Bugs: Consider that this is my fist time building, but post your bug in this thread, and me or another user that has more experience may help you. One thing that I have to say, is that, before I start building, I encountered this error: Thread Link
Don't know if this may cause some bugs, but for what I tested until now, everything is good.
I used this guide for building:
http://wiki.cyanogenmod.org/w/Build_for_captivatemtd
Installation:
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash CM11. Going directly from Samsung ROM/CM7 to CM11 may lead to loosing IMEI.
Fresh install:
Can be flashed on top of any CyanogenMod build:
-Do a factory reset
-Flash ROM
-Flash gapps
-Reboot your phone
<Some Screenshots (Mine):>
http://i.imgur.com/XsMOrF4.png
http://i.imgur.com/4NAr46r.png
Special Thanks to:
pawtip
CM team
cannondaleV2000 (His build motivated me to make my own)
If I forgot anyone, PM me, and I'll add you
Great work will test it soon
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
It can be used without any need to have any Google application installed.
CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
STATUS:
This is a direct port of CM11 to CM12.0 for n8010 and n8013 version of Galaxy Note 10.1
Rom is built with CM11 development branch, so bugs are expected
All the source code is available on my Github.
I do this on my free time and unfortunately I don't have much.
Any help is a appreciated!
LINKS:
CURRENT VERSIONS:
-20/11/2014:
unobootvercm12
Changelog:
Initial release - Proof of concept that we're building.
OLD VERSIONS:
None:
Source code: https://github.com/lirokoa
KNOWN BUGS:
Doesn't Boot Need a proprer updater.zip
FAQ:
I can't flash CM11, an error occurs.
You need to use a recovery that support KitKat ROM.
I can't flash CM11 on my n8010 tablet
You need to remove the assertion (1rst line until ; ) in the META-INFcomgoogleandroidupdater-script
Once this is done you won't need to do it anymore
CREDITS:
The whole Cyanogenmod team
All people who works on the Galaxy Note 10.1
XDA:DevDB Information
Unofficial Cyanogenmod for n8010/n8013/n8000, ROM for the Samsung Galaxy Note 10.1
Contributors
lirokoa
ME
ROM OS Version: 5.0.x KitKat
ROM Kernel: Linux 3.x.x
Version Information
Status: Experimental
Created 2014-11-20
Last Updated 2014-11-20[/QUOTE]
reserved
unsecure boot.img
https://www.sendspace.com/file/qau7jp
So it current doesn't boot? Do you have any idea of when you'll get the updater.zip working?
Great work btw, really do appreciate the effort
link6155 said:
So it current doesn't boot? Do you have any idea of when you'll get the updater.zip working?
Great work btw, really do appreciate the effort
Click to expand...
Click to collapse
sorry no eta on that one, depends on if i can get make otapackage or mka bacon working or if i can use another updater script
After nearly one year's silence, SwipeBack is now back alive, known as SwipeBack2.
SwipeBack2 is the continue of SwipeBack. It has still the basic feature, swipe-to-return gesture, inspired by the library SwipeBackLayout written by @Ikew0ng(a.k.a. IssacWong, 碎星iKe, 碎iKe). It provides a smooth, nature-like and highly customizable swipe-to-return gesture. This module is initially a wrapper of SwipeBackLayout in Xposed, and was welcomed widely by Xposed users. Gradually it has gained much new features that is more than SwipeBackLayout.
If you have installed the old SwipeBack, please uninstall it first, and then you can install SwipeBack2
Features:
* Swipe-to-return gesture
* Per-activity settings which means you are able to customize settings on <strong>each page of each app</strong>
* Experimental hacks for Lollipop (may not work, use with caution, do not turn it on globally)
* More experimental features are coming in future releases.
Note that SwipeBack2 is now only a rewrite and a port to Lollipop (but it still works fine on ICS/JB/KK). It has many work to-do, as:
* Pure-gesture mode (disable scrolling effects, enables compatibility with apps that consist of Fragments but not Activities, and can work with Browsers)
* Fully-costomizable trigger area (at <strong>any</strong> position on the edge, to fix compatibility with apps that has a gesture like drawers already)
* Automatic bug report and crash log submitter
* More (<strong>advices are always welcome)
SwipeBack2 is free software released under the terms of GNU GPLv3. Source code available at https://github.com/PaperAirplane-Dev-Team/SwipeBack
Download:
From Xposed Store: http://repo.xposed.info/module/info.papdt.swipeback
From Google Play Store: https://play.google.com/store/apps/details?id=info.papdt.swipeback
Changelog
1.0.0
- Initial Release
FAQs:
Q: Why renamed to SwipeBack2?
A: Because SwipeBack2 is completely rewritten, and is refactored to have a better stability and flexibility. And another reason is, that SwipeBack (us.shandian.swipeback) is blacklisted by Alipay because of the unsecure SwipeBack, so I just renamed it to SwipeBack2 (info.papdt.swipeback), hoping that it will not be blacklisted any more.
Q: Would you add feature X / fix bug X?
A: Feel free to send emails or open issues on GitHub page. I may not have time to reply to you all, but I will take a look at bug reports and feature requests and have the resonable ones implemented in new releases.
Q: SwipeBack is great! Do you accept donations?
A: Well, not now.
XDA:DevDB Information
SwipeBack2, ROM for all devices (see above for details)
Contributors
PeterCxy
Source Code: https://github.com/PaperAirplane-Dev-Team/SwipeBack
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Beta
Created 2015-03-31
Last Updated 2015-03-31
NOTE # I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
# Please do some research if you have any concerns about features included in the products you find here before flashing it!
# YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
# Your warranty will be void if you tamper with any part of your device / software.
UNOFFICIAL BUILD!
ALL THE SOURCE IS OPEN. I WILL LINK IT AT THE BOTTOM OF THE POST
ArrowOS is an AOSP inspired open source project started with the aim of keeping things simple, clean and neat.
CHANGELOG
SEE BELOW POSTS FOR CHANGELOG
BUGS
You Tell me
STEPS TO FLASH
1 INSTALL ROM
2 FLASH GAPPS (NANO OR PICO)
3 FLASH MAGISK( OPTIONAL)
4 REBOOT
Telegram http://t.me/LOSUNOFFICIAL
DOWNLOADS
ROM --> http://bit.ly/2Eqc1u6
GAPPS --> http://opengapps.org
SOURCE
DEVICE TREES --> http://github.com/Vince-Beast/device_xiaomi_vince
KERNEL --> http://github.com/Vince-Beast/kernel_xiaomi_msm8953
VENDOR --> http://github.com/Vince-Beast/vendor_xiaomi.git
CREATED : 2019/02/04
LAST UPDATED : 2019/02/04
Changelog 2019/02/23
>FEBRUARY SECURITY PATCH
>ADDED MIUI CAM
>MINOR FIXES
Changelog 2019/02/04
>initial build
RESERVED
so whats the difference other than the dev (tree, kernel).. i mean any spesific differences?
New build is up! Check second post for changelog
Fingerprint enrollment didn't work. Try again or use a different finger.