Bricked P9 Lite - Huawei P9 Lite Questions & Answers

Hello.
I have a serious issue, please help
I have installed OEMInfo on my phone and now I have ERROR SCREEN!
It is like bootloader screen, but instead phone goes to it everytime, no mather what buttons I press down
It says
ERROR MODE
Attention!
Please update system again
ANDROID LOGO, LIKE IN BOOTLOADER
Error!
Func NO : 11 (recovery image)
Func NO : 2 (load failed!)
What am I supposed to do now? Please help :|

What OEMInfo did you flash ?

This happens when you flash stock recovery and lock the bootloader just after flash without at least rebooting the phone when you flash the stock recovery (sounds so weird omg...)
I sent the "fix" on PM.

TheOneWhoSpeaks said:
This happens when you flash stock recovery and lock the bootloader just after flash without at least rebooting the phone when you flash the stock recovery (sounds so weird omg...)
I sent the "fix" on PM.
Click to expand...
Click to collapse
Can you please give me the solution? I have the same issue, bootloop on huawei logo, can't enter bootloader or recovery. Thanks

Related

Big Trouble, phone bricked no solution found...

Hello!
I am a new to this forums so bare with me please
i have bricked my phone badly.., i tried to install the ota update for P10 Plus (VKY-L29C432B123) with FlashFire and in the middle of the update the phone went black and my problems began getting worse.
i rebooted the phone and got into Error mode Func No: 11 (recovery image) and Error No: 2 (boot faild in recoveryboot mode!).
so i followed a guide and reinstalled twrp to attemp to restore the system somehow, so i kept following the guide and i went into twrp --> wipe --> format data and here my real problems began..
i did many attemps to install any firmware both stock and roms but i got into system mount problem and i can't do anything to transfer files to system i have tried adb but it can't find my device, tried adb sideloaded doesn't work eaither.
so i am stuck in no where..
the phone and frp are unlocked.
but i have missed to enable USB debugg mod
so now i wonder if there is any solution for me in this case?
greatly thankfull if anyone can help me with this big mess.
Try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page47
gm007 said:
Try this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108/page47
Click to expand...
Click to collapse
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
forati89 said:
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
Click to expand...
Click to collapse
You can use that HWOTA method to recovery FullOTA rom no need to use FunkyHuawei.
forati89 said:
Hello!
I am a new to this forums so bare with me please
i have bricked my phone badly.., i tried to install the ota update for P10 Plus (VKY-L29C432B123) with FlashFire and in the middle of the update the phone went black and my problems began getting worse.
i rebooted the phone and got into Error mode Func No: 11 (recovery image) and Error No: 2 (boot faild in recoveryboot mode!).
so i followed a guide and reinstalled twrp to attemp to restore the system somehow, so i kept following the guide and i went into twrp --> wipe --> format data and here my real problems began..
i did many attemps to install any firmware both stock and roms but i got into system mount problem and i can't do anything to transfer files to system i have tried adb but it can't find my device, tried adb sideloaded doesn't work eaither.
so i am stuck in no where..
the phone and frp are unlocked.
but i have missed to enable USB debugg mod
so now i wonder if there is any solution for me in this case?
greatly thankfull if anyone can help me with this big mess.
Click to expand...
Click to collapse
could you tell me how did you get rid of this error message? im not able to boot into the bootloader, or not completely because the device is not recognized in fastboot.. everytime i turn it off, it turns automatically on and end in, it looks like the bootloader, but with that two error messages, so im not able to do anything..
m_adnan said:
could you tell me how did you get rid of this error message? im not able to boot into the bootloader, or not completely because the device is not recognized in fastboot.. everytime i turn it off, it turns automatically on and end in, it looks like the bootloader, but with that two error messages, so im not able to do anything..
Click to expand...
Click to collapse
To boot into bootloader mode you have to plug the usb and hold volume down while booting.
gm007 said:
To boot into bootloader mode you have to plug the usb and hold volume down while booting.
Click to expand...
Click to collapse
i try that so many times.. but it doesn't work.. as soon as the phone has power, im not able to turn it off.. it start automatically again, and i can press what ever i want, vol down power (with/without usb), vol up power, it always ends in the same:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
m_adnan said:
i try that so many times.. but it doesn't work.. as soon as the phone has power, im not able to turn it off.. it start automatically again, and i can press what ever i want, vol down power (with/without usb), vol up power, it always ends in the same:
ERROR MODE
Attention!
Please update system again
Error!
Func NO: 11 (recovery image)
Error NO: 2 (load failed!)
Click to expand...
Click to collapse
That's a big problem if you can't access fastboot or erecovery.
Seems you messed up the 2 recoveries.
gm007 said:
That's a big problem if you can't access fastboot or erecovery.
Seems you messed up the 2 recoveries.
Click to expand...
Click to collapse
yes it looks like.. i mean, it wouldn't be a problem to flash recovery again, but i can't get the device to boot into the bootoader so i can work with fastboot..
m_adnan said:
yes it looks like.. i mean, it wouldn't be a problem to flash recovery again, but i can't get the device to boot into the bootoader so i can work with fastboot..
Click to expand...
Click to collapse
Maybe you still have twrp installed?
Volume up + power without connecting usb.
gm007 said:
Maybe you still have twrp installed?
Volume up + power without connecting usb.
Click to expand...
Click to collapse
already tried, but without success.. it always end in that error mode..
forati89 said:
Thanks i had already checked that thread.
i solved the problem by restoring the stock recovery and used eRecovery and funkyhuawei to download firmware and it just went perfectly.
Click to expand...
Click to collapse
how you managed to restore stock recovery? with frp only reading is allowed in fastboot i thought?
same probs here with my p10 vtr-l09 but cant get to one of the recoverys .. how can i tell the frp lock that everything is fine with my fastboot commands?
Sent from my HUAWEI HUAWEI GRA-L09 using XDA Labs
hi, did you manage to solve this problem?

Is there a way to get my phone back to normal? Please help...

Hi! Please don´t judge me for the stupid **** I have done with my mobile although I probably deserved it lol. Its started with completely wiping my phone through TWRP, then I accidentaly replaced the boot and recovery modes, so now everytime I turn on my mobile it says:
RESCUE MODE!
Attention! Please update system again
Error!
Func NO : 6 (modern image!
Error NO : 3 (load failed in recoveryboot mode!)
Please anyone, is there a way I can fix it??
XCube591 said:
Hi! Please don´t judge me for the stupid **** I have done with my mobile although I probably deserved it lol. Its started with completely wiping my phone through TWRP, then I accidentaly replaced the boot and recovery modes, so now everytime I turn on my mobile it says:
RESCUE MODE!
Attention! Please update system again
Error!
Func NO : 6 (modern image!
Error NO : 3 (load failed in recoveryboot mode!)
Please anyone, is there a way I can fix it??
Click to expand...
Click to collapse
Friend, if you want to re-cover phone, do this steps.
1. Connect your phone to PC and fast press volume down and power button (phone needs to be off)
2. You will be now on Bootloader & rescue mode.
3. Get boot.IMG, Recovery.img system.img and flash it (fastboot flash boot boot.img and everything like so)
4. reboot

p8 lite 2017 full bricked no fastboot

my phone boot only in this screen mode http://imgur.com/a/rMcO7. this is not my pic but error is: error mode attention. please update system again. error. func no 14 (iom3 image) error no: 1 (security verify failed).
What can I do to revive my phone. not working fastboot, bootloader, dload method to force flash of rom ecc... THx
I've similar situation..i'm not able to flash any kind of image..
Wire1122 said:
my phone boot only in this screen mode http://imgur.com/a/rMcO7. this is not my pic but error is: error mode attention. please update system again. error. func no 14 (iom3 image) error no: 1 (security verify failed).
What can I do to revive my phone. not working fastboot, bootloader, dload method to force flash of rom ecc... THx
Click to expand...
Click to collapse
Friend, if you want to re-cover phone, do this steps.
1. Connect your phone to PC and fast press volume down and power button (phone needs to be off)
2. You will be now on Bootloader & rescue mode.
Now you search for mega Thread and there will be unbricking section! UW!
RootingPro-18 said:
Friend, if you want to re-cover phone, do this steps.
1. Connect your phone to PC and fast press volume down and power button (phone needs to be off)
2. You will be now on Bootloader & rescue mode.
Now you search for mega Thread and there will be unbricking section! UW!
Click to expand...
Click to collapse
Thancks, but my phone is already in huawei assistance.

My huawei p8 lite (ale-l21) stucks in rescue mode

My phone huawei p8 lite ALE-L21 STUCKS IN RESCUE MODE.THAT HAPPENS ,
I ROOTED MY PHONE AND I WANT TO INSTALL TWRP.SO I DOWNLOAD IMAGE FOR HUAWEI AND INSTALL AN APP FLASH RECOVERY.WHEN I CLICK OPTION UNLOCK BOOT LOADER MY PHONE ENTERS INTO FASTBOOT AND RECOVERY MODE AND IT SAYS MY PHONE WAS UNLOCKED. THEN I CLICK AN ANOTHER OPTION AND IT TURNS MY PHONE INTO STUCK. MY PHONE WAS PERFECTLY WORKING BEFORE AND ONLY A CLICK CHANGED IT ALL.. ON MY SCREEN IT SAYS
Error!
Func No:10(boot image)
Error No:2(boot image failed in normalboot mode)
Attention!
Please update your system again.
Update user guide :
Zh.ui.vmall.com/emotiondownload.php?mod=restore
WHAT DID I DO??
I GO TO MANY REPAIRING CENTERS AND THEY CANT DO THIS..
PLEASE HELP ME....PLEASE....THE KEYS (VOLUME AND POWER IS BOTH NOT WORKING.BUT I CAN REPAIR IT).
I HAVE A LAPTOP.SO GIVE ME ADVICES I CAN DO IT..
IMHO you unrecoverably bricked the phone, otherwise the repair centers you contacted could have helped.

HELP! Hardbricked p10 lite after dload update

Apparently I played way too much with my p10 lite and managed to get it bricked very badly... I can't get to any kind of recovery mode, erecovery, update menu for dload, I can only get to fastboot mode, when I try to boot into the rom or into recovery I get "error mode func 2 and func 11".
My bootloader and FRP are UNLOCKED.
When I try flashing any recovery (twrp or stock) through fastboot it gives "remote: partition length get error"
How can I unbrick the phone since I don't have the option to use dload?
Hello! same here!
anybody help plz?
Mcgreygor said:
Hello! same here!
anybody help plz?
Click to expand...
Click to collapse
Hi...
[email protected] other Thread for answer
solong
speedson
angushev20 said:
Apparently I played way too much with my p10 lite and managed to get it bricked very badly... I can't get to any kind of recovery mode, erecovery, update menu for dload, I can only get to fastboot mode, when I try to boot into the rom or into recovery I get "error mode func 2 and func 11".
My bootloader and FRP are UNLOCKED.
When I try flashing any recovery (twrp or stock) through fastboot it gives "remote: partition length get error"
How can I unbrick the phone since I don't have the option to use dload?
Click to expand...
Click to collapse
hey man, we are working on this thread now!
P10 Lite Hardbrick (can't dload, erecovery, flash recovery,etc...)
Hello guys! i have the same problem as this guy here: https://forum.xda-developers.com/t/help-hardbricked-p10-lite-after-dload-update.4191821/ LET'S BEGIN OUR JOURNEY: i follow this guide succesfully...
forum.xda-developers.com
if you need it!

Categories

Resources