Database Users

Is my Umi Super bricked? Can I solve?

Hello guys, I don't visit so often the posts, anyway I would say thank you in advance to help me. I tried to install TWRP on my Umi Super, but during I was flashing it with SP Flash Tool the USB cable was unfortunately disconnected. Now my Umi Super cannot switch on, if I connect to Power charger nothing happens, If i connect to the PC I can ear the plug sound but the device is not detected. Some idea to solve this issue? thanks. Antonio.

Solved
After 20 days the battery was completely discharged. I trieed one more time to connect the UMI Super to the PC wiht SP_FlashTool and "something" happen so red bar below appeared and the phone restart to recharge the battery, than I waited to charge till about 50%, so I disconnected and the phone was able to switching on !
Nothing was loose any data I found in my phone. Anyway after I installed TWRP and so the firmware upgrade in .zip version. I hope will be usefull for some people.

beato te...io ho cercato di re installare la recovery stock e mi si e' brikkato....azzo. solosuono di connessione al pc e basta..morto.

le pro 3 al x650 hard brick. heeeelp

after flashing some rom files with fastboot my phone turned off and not opening again.
when i connect it to pc the only point of life is a red light. 2 ports appear in device manager.
a port named mediatek usb port (com 12) and another one port named mediatek preloader usb vcom (com 13).
my phone connect and disconnect every 1-2 second(s) between the 2 ports. i have try any program, rom and usb drivers
but nothing. with some drivers and the right moment using sp flash tool the bar at the bottom of flash tool stay red for
about 5 seconds and then turning into yellow, a error message appear, and the port stay open but not working anymore until power
button pressed for 15 sec. Please help

d3ath7 said:
after flashing some rom files with fastboot my phone turned off and not opening again.
when i connect it to pc the only point of life is a red light. 2 ports appear in device manager.
a port named mediatek usb port (com 12) and another one port named mediatek preloader usb vcom (com 13).
my phone connect and disconnect every 1-2 second(s) between the 2 ports. i have try any program, rom and usb drivers
but nothing. with some drivers and the right moment using sp flash tool the bar at the bottom of flash tool stay red for
about 5 seconds and then turning into yellow, a error message appear, and the port stay open but not working anymore until power
button pressed for 15 sec. Please help
Click to expand...
Click to collapse
I have your same problem too.
I do not know what I have to do. Help us pleas.

Sent from my LEX720 using xda premium
What ROM did you fastboot?

mchlbenner said:
Sent from my LEX720 using xda premium
What ROM did you fastboot?
Click to expand...
Click to collapse
i can't remember :crying:

try with this if not work use flashtool to flash it, press vol + and connect the phone to pc-usb
https://forum.xda-developers.com/sho...97&postcount=9

Fastboot can not connect with phone anymore.
Please someone help

hi, I have the same problem as you have solved?

Hi.I have the same problem.I flashed a wrong orange state fix zip and then my phone bricked.When i try to open my phone or to connect to usb it vibrates for a tie then stops then repeats.when i press power button with vol + and vol- it sops.when i press vol+ and the connect to usb it does nothing but just vibrates wuth some pauses.What can i do?I am desperate!

Something changed
stelizap99 said:
Hi.I have the same problem.I flashed a wrong orange state fix zip and then my phone bricked.When i try to open my phone or to connect to usb it vibrates for a tie then stops then repeats.when i press power button with vol + and vol- it sops.when i press vol+ and the connect to usb it does nothing but just vibrates wuth some pauses.What can i do?I am desperate!
Click to expand...
Click to collapse
After some time i realised that my laptop recognized the phone and i tried t boot from stock boot.img.Nothing happened but now the vibrating dissapears.WHen i try again to connect to my laptop,it just has a red light and the laptop just says its connecting and disconnecting continously.

I remember when i owned a mediatek device when it bricked you could resurrect it by flashing a rom whit sp flash tool, the hard part would be finding a rom compatible with that tool
---------- Post added at 07:58 PM ---------- Previous post was at 07:55 PM ----------
here try this rom https://forum.xda-developers.com/le...e-pro3-ai-x650-eui5-925s-install-rom-t3716920
unzip it and in the sp flash tool load that scatter file
Some times the pc/ program wont recognize the phone, just google the drivers and install it
Update us if it works

Erazi1999 said:
I remember when i owned a mediatek device when it bricked you could resurrect it by flashing a rom whit sp flash tool, the hard part would be finding a rom compatible with that tool
---------- Post added at 07:58 PM ---------- Previous post was at 07:55 PM ----------
here try this rom https://forum.xda-developers.com/le...e-pro3-ai-x650-eui5-925s-install-rom-t3716920
unzip it and in the sp flash tool load that scatter file
Some times the pc/ program wont recognize the phone, just google the drivers and install it
Update us if it works
Click to expand...
Click to collapse
The download link from the link you send is not working anymore.It is ok if i download the zip from /drive.google.com/file/d/1lqMsiBm5I9ySWxZBtaC23vppLj4Kf2tk/view from the post /forum.xda-developers.com/le-pro3/leeco-le-pro3-a1-model-x651-guides-development--and-mods/le-pro3-ai-version-x650-eui5-925s-t3716455 ?
Edit:With what i downloaded,it didnt work.I dont remember what was the error.

I'm desperate
Any solution? I'm desperate and I have the same problem
I found out how to fix the ports
Now I'm stuck at part 3 point 7 of this tutorial
I can't get the sp flash tool to download anything. When I click download and plug in the phone the sp tool doesnt do anything (bar is stuck at 0% and download speed is 0b/s) but I can hear my PC working louder and when I disconnect the phone the tool shows an error
"BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (0x7D5)
[BROM] Can not pass bootrom start command! Possibly target power up too early.
[HINT]:"
Somebody please help
Phone Info:
Leeco Le Pro 3 AI Edition x653

Please someone help!

I FINALLY unbricked my phone yesterday!
I will put down below a tutorial on how to do it.
https://www.youtube.com/watch?v=DvQFDokjdeY&feature=youtu.be

Scusami, il link alla guida non funziona più.
Potresti ripostarlo?
Ho lo stesso problema con il mio lx650.
Grazie

Help! Zte maven 3 z835.

Hello friends of XDA I have a problem with my ZTE MAVEN 3 Z835 cell phone followed by another user guide to root the device, I got an error when downloading, missing some .mbn files, download the firmware V1.0.0B13 and replace the files with modified the root versions were the same and I had the same cell phone version so I said no problem, I did not give error and discharge normally up to 100% the phone went off and did not turn on, I connect to the charger and it does not load or turn on the LED, it does not turn on the screen and I can not enter FTM mode or recovery, I connect it to the PC and it does not detect that a device is connected. PLEASE HELP ME WHAT I NEED
Sorry for my english use google translator.

Namelexx said:
Hello friends of XDA I have a problem with my ZTE MAVEN 3 Z835 cell phone followed by another user guide to root the device, I got an error when downloading, missing some .mbn files, download the firmware V1.0.0B13 and replace the files with modified the root versions were the same and I had the same cell phone version so I said no problem, I did not give error and discharge normally up to 100% the phone went off and did not turn on, I connect to the charger and it does not load or turn on the LED, it does not turn on the screen and I can not enter FTM mode or recovery, I connect it to the PC and it does not detect that a device is connected. PLEASE HELP ME WHAT I NEED
Sorry for my english use google translator.
Click to expand...
Click to collapse
Intenta presionando boton de volumen arriba y abajo al mismo tiempo y conecta el cable usb, asi entra en modo descarga

Security error:This phone has been flashed with unauthorized software & is locked.

Security error:This phone has been flashed with unauthorized software & is locked.
Hello everyone. I have Samsung Galaxy S5e and I tried twrp flashing.
After tablet couldn't start and boot loop.
I tried to clear cache and reboot.
After reboot i got a error,
Security error:This phone has been flashed with unauthorized software & is locked. Call you mobile operator for additional support.
Now i can not do anything.
No recovery no download mode nothing.
Please help me.....
This is the image link because i can't upload picture here.
https://ibb.co/yNvwh7P

You will need to download the original firmware and reflash with Odin, that will fix this error.
Edit: You can get it into download mode, just keep trying...

babafooka said:
Hello everyone. I have Samsung Galaxy S5e and I tried twrp flashing.
After tablet couldn't start and boot loop.
I tried to clear cache and reboot.
After reboot i got a error,
Security error:This phone has been flashed with unauthorized software & is locked. Call you mobile operator for additional support.
Now i can not do anything.
No recovery no download mode nothing.
Please help me.....
This is the image link because i can't upload picture here.
https://ibb.co/yNvwh7P
Click to expand...
Click to collapse
To enter 'Download Mode' and recover from the error:
Connect a USB cable to your Laptop/PC.
With power-off on the device, hold down BOTH 'Volume Up' and 'Volume Down'.
Connect the USB cable to the device, while holding down both volume keys, and press 'Power'.
If done correctly, the device will boot to 'Download Mode'.

Hi. Thank you for replying but it doesn't help. Every time i get same screen.
Believe me i did correctly.

nsx2brz said:
You will need to download the original firmware and reflash with Odin, that will fix this error.
Edit: You can get it into download mode, just keep trying...
Click to expand...
Click to collapse
Sir i can not enter in download mode.

babafooka said:
Sir i can not enter in download mode.
Click to expand...
Click to collapse
Mine did that once to me, try following the instructions and be persistant...

I am soo stupid. I brocked my tablet after unsuccessful attempts. Last week I bought new same tablet and happened again same situation after update magisk menager.
I tried your method and it works. I love you so much. You saved me.
Last time didn't work because laptop usb port was defective. I brocked 450€ tablet.

nsx2brz said:
Mine did that once to me, try following the instructions and be persistant...
Click to expand...
Click to collapse
You can flash with odin on the warning screen

PetiHun08 said:
You can flash with odin on the warning screen
Click to expand...
Click to collapse
Bro its literally easy

I have flashed tweaked rom on my SM-T820. It worked for a good 6 months and then this error has started to happen. Can reboot once or twice then the security error happens. I then need to reflash original firmware and then twrp, tweaked and repeat. Is there a way to stop this happening?

TiTiB said:
To enter 'Download Mode' and recover from the error:
Connect a USB cable to your Laptop/PC.
With power-off on the device, hold down BOTH 'Volume Up' and 'Volume Down'.
Connect the USB cable to the device, while holding down both volume keys, and press 'Power'.
If done correctly, the device will boot to 'Download Mode'.
Click to expand...
Click to collapse
***Moderator Edit: Translation provided***
And if this is done, the cell phone data, photos, etc. are not deleted?
Spoiler: Spanish
Y si se hace esto no se borran los datos del celular, fotos,etc.??

RaulValles21 said:
***Moderator Edit: Translation provided***
And if this is done, the cell phone data, photos, etc. are not deleted?
Spoiler: Spanish
Y si se hace esto no se borran los datos del celular, fotos,etc.??
Click to expand...
Click to collapse
Please use English on XDA, per Article 4 of the Forum Rules.
Booting into download mode will not wipe data.

thanks

I have the same problem after trying to flash TWRP on a sm-t295 - tab A.
It seems I need to flash the original firmware - T295XXU4CUF7.
Do you know where can I get it? UK variant.
Thanks

How to exit EDL mode on Lenovo Tab 4 8 Plus?

I flashed stock ROM to my Lenovo TB8704F recently, but when I rebooted, I ended up in EDL mode. I've searched online for solutions but they all appear to be for other manufacturers and don't work on my tablet. How do I exit EDL mode on my Lenovo Tab 4 8 Plus? All the usual hold power button stuff like that don't work.

bump

Bump

Bump

Bump

Bump

ADB reboot edl:
https://www.magnetforensics.com/blog/qualcomm-phone-edl-mode/

puszcza said:
ADB reboot edl:
https://www.magnetforensics.com/blog/qualcomm-phone-edl-mode/
Click to expand...
Click to collapse
I'm stuck in EDL and can't access normal mode or recovery where adb works, so no.

Bump

Bump

ChasTech said:
I flashed stock ROM to my Lenovo TB8704F recently, but when I rebooted, I ended up in EDL mode. I've searched online for solutions but they all appear to be for other manufacturers and don't work on my tablet. How do I exit EDL mode on my Lenovo Tab 4 8 Plus? All the usual hold power button stuff like that don't work.
Click to expand...
Click to collapse
Just a guess...but if you're stuck in EDL mode, it should be as easy as using Lenovo's LMSA tool to rescue the tablet. Connect your tablet to the PC when LMSA prompts you to. Don't worry about pressing the Volume Up button, because you're already in EDL mode.
This will flash the stock ROM and wipe your data. At the end of the process, it automatically reboots into Android setup.
If that doesn't work, then confirm you're actually in EDL mode. Connect the tablet to a Windows PC and confirm in Device Manager that it shows as a "Qualcomm HS-USB QDLoader 9008" port device.
The only other trick I know of is that some users have reported that EDL mode's ability to connect to a PC times out after a short period. So reboot your device (if you can) before connecting it to LMSA.

Yahoo Mike said:
Just a guess...but if you're stuck in EDL mode, it should be as easy as using Lenovo's LMSA tool to rescue the tablet. Connect your tablet to the PC when LMSA prompts you to. Don't worry about pressing the Volume Up button, because you're already in EDL mode.
This will flash the stock ROM and wipe your data. At the end of the process, it automatically reboots into Android setup.
If that doesn't work, then confirm you're actually in EDL mode. Connect the tablet to a Windows PC and confirm in Device Manager that it shows as a "Qualcomm HS-USB QDLoader 9008" port device.
The only other trick I know of is that some users have reported that EDL mode's ability to connect to a PC times out after a short period. So reboot your device (if you can) before connecting it to LMSA.
Click to expand...
Click to collapse
I've tried using LSMA, but it just says it failed to restore.

ChasTech said:
I've tried using LSMA, but it just says it failed to restore.
Click to expand...
Click to collapse
That doesn't sound good. I assume you're using the "powered off" rescue mode in LMSA, and entering the correct Hardware Code for your tablet.
After you connect the tablet to LMSA, does the progress bar move at all? If it does, at what point does it fail?
Did you get any further with QComDLoader and/or QFIL ? Did they give you more descriptive error messages?
Can you confirm the port name for your powered-on tablet in Windows Device Manager? It's usually either "9008" (EDL) or "900E" (diagnostics).

Yahoo Mike said:
That doesn't sound good. I assume you're using the "powered off" rescue mode in LMSA, and entering the correct Hardware Code for your tablet.
Click to expand...
Click to collapse
Yes, yes I am.
After you connect the tablet to LMSA, does the progress bar move at all? If it does, at what point does it fail?
Click to expand...
Click to collapse
It goes from 67% "Downloading recovery file to device" straight to 100%, then it says FAIL.
Did you get any further with QComDLoader and/or QFIL ? Did they give you more descriptive error messages?
Click to expand...
Click to collapse
QFIL gave me a sahara error, QComDLoader doesn't recognise the device.
Can you confirm the port name for your powered-on tablet in Windows Device Manager? It's usually either "9008" (EDL) or "900E" (diagnostics).
Click to expand...
Click to collapse
It does show up as "Qualcomm HS-USB QDLoader 9008 (COM4)"

ChasTech said:
Yes, yes I am.
It goes from 67% "Downloading recovery file to device" straight to 100%, then it says FAIL.
QFIL gave me a sahara error, QComDLoader doesn't recognise the device.
It does show up as "Qualcomm HS-USB QDLoader 9008 (COM4)"
Click to expand...
Click to collapse
I wonder if it it's a USB-driver problem.
You could try to uninstall & delete the 9008 driver from Device Manager (when you tablet is connected to PC). Then uninstall LMSA and reboot. Reinstall LMSA and see how you go. You should end up with the 9008 EDL driver from Lenovo. That should be compatible with LMSA.

Yahoo Mike said:
I wonder if it it's a USB-driver problem.
You could try to uninstall & delete the 9008 driver from Device Manager (when you tablet is connected to PC). Then uninstall LMSA and reboot. Reinstall LMSA and see how you go. You should end up with the 9008 EDL driver from Lenovo. That should be compatible with LMSA.
Click to expand...
Click to collapse
I just tested something: I tried flashing it without the tablet plugged in. Surprisingly, it did exactly the same as I said it had done in my reply, it was at 67% then went to 100% and failed. Therefore, I am beginning to think that LSMA does not recognise the device. I have tried doing what you recommend, but still the same.

ChasTech said:
I just tested something: I tried flashing it without the tablet plugged in. Surprisingly, it did exactly the same as I said it had done in my reply, it was at 67% then went to 100% and failed. Therefore, I am beginning to think that LSMA does not recognise the device. I have tried doing what you recommend, but still the same.
Click to expand...
Click to collapse
If there's a lengthy pause between 67% and 100%, then that's typical behaviour when your connected tablet is not in receptive EDL mode.
Double check that the 9008 driver is the one provided by Lenovo dated 21/10/2014 v.20.0.9.6. You can check in the driver's properties in Device Manager.
Remember to power the tablet off and back on just before connecting it to the PC when LMSA is sitting at 67%. Many users report that if a device is in EDL mode too long, then it won't connect to the PC. The solution is to reboot the device and re-start EDL mode. Sometimes that involves disconnecting & reconnecting the battery - let's hope you don't have to do that.
Try a different USB cable. Not all cables are fully wired.
@AlaskaLinuxUser had some luck trying older versions of QFIL. You could get lucky and find one that works for you.
Otherwise, you might be forced to send the tablet to Lenovo for repair. Something obviously went horribly wrong when you flashed that ROM to your tablet. I wouldn't flash that ROM again.

AndroidGuy087 said:
Sim, sim, eu sou.
Ele vai de 67% "Baixando o arquivo de recuperação para o dispositivo" direto para 100% e diz FALHA.
QFIL me deu um erro de sahara, QComDLoader não reconhece o dispositivo.
Ele aparece como "Qualcomm HS-USB QDLoader 9008 (COM4)"
Click to expand...
Click to collapse
Bom Dia! estou com o mesmo problema, voce conseguiu resolver, pode me ajudar?

AndroidGuy087 said:
Eu mostrei ROM de estoque para meu Lenovo TB8704F recentemente, mas quando reiniciei, acabei no modo EDL. Procurei soluções online, mas todas parecem ser de outros fabricantes e não funcionam no meu tablet. Como faço para sair do modo EDL no meu Lenovo Tab 4 8 Plus? Todas as coisas usuais de manter o botão liga / desliga como esse não funcionam.
Click to expand...
Click to collapse
Bom dia, estou com o mesmo problema voce conseguiu resolver?

Atailson said:
Bom Dia! estou com o mesmo problema, voce conseguiu resolver, pode me ajudar?
Click to expand...
Click to collapse
Please use English on XDA
Google translation
Good Morning! I have the same problem, you managed to solve it, can you help me?
Click to expand...
Click to collapse
Atailson said:
Bom dia, estou com o mesmo problema voce conseguiu resolver?
Click to expand...
Click to collapse
Good morning, I have the same problem, were you able to solve it?
Click to expand...
Click to collapse