Hey there,
I entered bootloader and did fastboot flash recovery recovery_stock. Rebooted the device , pushing vol up + down + power together. Now it says installing update but it keeps at 5%....
What can be the issue???
What's your model phone ? VNS-L21/L31 , Cxxx ? , Single/Dual SIM ?
I believe you had Custom ROM and wanted to go back to stock , am I right ?
Yes indeed. I broke my phone. Some weird stuff. Its a vns-l31 european dual sim p 9 lite. I found a stock rom for this phone. It starts the installation to 5%. But some more stuff is wrong.
I got acces to bootloader. If i do commands in adm my phone responds. But i never see a device. Also i tried reinstall twrp a few times. It always say its succesfull but i am unble to boot the twrp.
Ok , download this firmware >> click here (It's VNS-L31C432B160 << B160 for Dual SIM , B161 for Single SIM)
Now , connect the phone to PC , format sdcard in NTFS , make a new folder called dload and put update.app file in it.
Then try dload method again. Lemme know if this works
FunnkyHD said:
Ok , download this firmware >> click here (It's VNS-L31C432B160 << B160 for Dual SIM , B161 for Single SIM)
Now , connect the phone to PC , format sdcard in NTFS , make a new folder called dload and put update.app file in it.
Then try dload method again. Lemme know if this works
Click to expand...
Click to collapse
Funky, but i also heaving issues with finding my Phone. like it worked great on windows 7. But i upgraded to windows 10 and i have issues with detecting the Phone. Like i can run commands with adb etc. I noticed it is because of the drivers are not correcly installed. so i looked for 15 seconds ADB Installer v1.4.3. If i install that it installs 0 files and will leave the cmd window. Il try to input my sd card to a diffrent pc and format it over there..
Anyway thanks for the support .
solvathus said:
Funky, but i also heaving issues with finding my Phone. like it worked great on windows 7. But i upgraded to windows 10 and i have issues with detecting the Phone. Like i can run commands with adb etc. I noticed it is because of the drivers are not correcly installed. so i looked for 15 seconds ADB Installer v1.4.3. If i install that it installs 0 files and will leave the cmd window. Il try to input my sd card to a diffrent pc and format it over there..
Anyway thanks for the support .
Click to expand...
Click to collapse
Uninstall current drivers and install again , I guess ? Should fix the issue..
By the way , I suggested formatting the sdcard to NTFS because it fixed the "Failed to check the update package" error for me when I tried dload method , maybe this will work for you too (Even though you say it stays at 5%)...
But it can also be a bad sdcard ...
Hey,
I did as you said.
Format the SD card to NTFS, downloaded the software from your link and putted it in dload folder.
Placed the sd card back to Phone , pressed vol up down and power button. Still the same situation. It's getting stucked at 5%
solvathus said:
Hey,
I did as you said.
Format the SD card to NTFS, downloaded the software from your link and putted it in dload folder.
Placed the sd card back to Phone , pressed vol up down and power button. Still the same situation. It's getting stucked at 5%
Click to expand...
Click to collapse
Does it stay at 5% and do nothing or you get an error ?
FunnkyHD said:
Does it stay at 5% and do nothing or you get an error ?
Click to expand...
Click to collapse
I have same problem bro but. Within 5% update was stopedand say can't update. But I found from firmware instruction. When phone have this problem transfer r&b package. But still I don't know about r&b package.
rathnayakepr3 said:
I have same problem bro but. Within 5% update was stopedand say can't update. But I found from firmware instruction. When phone have this problem transfer r&b package. But still I don't know about r&b package.
Click to expand...
Click to collapse
Don't know about rollback package , never used it... also , try the same method (I mean format the sd card in NTFS)
FunnkyHD said:
Does it stay at 5% and do nothing or you get an error ?
Click to expand...
Click to collapse
5% and it does nothing. After some time my phone just reboots...
Are you trying to flash the stock firmware through dload while your phone is connected to PC ? If yes , then disconnect it .
FunnkyHD said:
Are you trying to flash the stock firmware through dload while your phone is connected to PC ? If yes , then disconnect it .
Click to expand...
Click to collapse
Yeah i kind of did that. Im not home atm. I will try it later without attached to pc. I can keep it getting charged with powerplug instead uw usb powered through pc?
solvathus said:
Yeah i kind of did that. Im not home atm. I will try it later without attached to pc. I can keep it getting charged with powerplug instead uw usb powered through pc?
Click to expand...
Click to collapse
If you have enough battery , then try again without it attached to PC.
If you don't , then let it charge and try later
solvathus said:
Yeah i kind of did that. Im not home atm. I will try it later without attached to pc. I can keep it getting charged with powerplug instead uw usb powered through pc?
Click to expand...
Click to collapse
Did it work ?
FunnkyHD said:
Ok , download this firmware >> click here (It's VNS-L31C432B160 << B160 for Dual SIM , B161 for Single SIM)
Now , connect the phone to PC , format sdcard in NTFS , make a new folder called dload and put update.app file in it.
Then try dload method again. Lemme know if this works
Click to expand...
Click to collapse
You are my hero.
Thank you very much!
FunnkyHD said:
Did it work ?
Click to expand...
Click to collapse
Hi I got similar problem. I flashed OEM from here: https://www.htcmania.com/showthread.php?p=23848404. Got stock recovery from here: https://forum.xda-developers.com/huawei-p9lite/how-to/root-root-recovery-bootloader-unlock-t3457564. Flashed both without problems. I downloaded your file, I'm on VNS-L31, europe, dualsim too but on 5% it says installation failed. I tried others firmwares, same issue. I have now RR and got TWRP before, but it glitched almost bricked the phone so I wanna stock back. How can I achieve that?
4uvak91 said:
Hi I got similar problem. I flashed OEM from here: https://www.htcmania.com/showthread.php?p=23848404. Got stock recovery from here: https://forum.xda-developers.com/huawei-p9lite/how-to/root-root-recovery-bootloader-unlock-t3457564. Flashed both without problems. I downloaded your file, I'm on VNS-L31, europe, dualsim too but on 5% it says installation failed. I tried others firmwares, same issue. I have now RR and got TWRP before, but it glitched almost bricked the phone so I wanna stock back. How can I achieve that?
Click to expand...
Click to collapse
Use VNS-L31C432B160
FunnkyHD said:
Use VNS-L31C432B160
Click to expand...
Click to collapse
I dled it from your link, no luck. I already did this procedure before and it worked but now no... Maybe i need to completely wipe all aka brick it and flash all over again maybe the oem, recovery and 3 button method?
4uvak91 said:
I dled it from your link, no luck. I already did this procedure before and it worked but now no... Maybe i need to completely wipe all aka brick it and flash all over again maybe the oem, recovery and 3 button method?
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B3CRCPqinridbmRheGx3VjU1Sjg << use this oeminfo
Related
Hello There!!
I was trying to get back to stock rom
And Always Getting this no space error 5069 While Flashing
After searching i found that format will fix this and i can flash like a charm
But after formatting my Device Is dead
no boot, no charging, no recovery
I'm Trying TO whole flash but I'm there is no option for that only Getting without bootloader one
Then i've checked it memory in memory test option now i'm getting
Nand Flash Not Detected
Plz!!! tell me what i can do to take my phone back to life
The Phone is out of warrenty
Same thing happend with me.
Use format+download all in SPFlashTool (with the same stock ROM), then do a firmware upgrade in SPFT with the same ROM.
Shahbaz23 said:
Use format+download all in SPFlashTool (with the same stock ROM), then do a firmware upgrade in SPFT with the same ROM.
Click to expand...
Click to collapse
Thanks for replying, i almost lost my hope of fixing this problem
Now after trying it says:
1) after format+download it says no space error
2)then i tried firmware upgrade i'm getting " Failed to get PMT info " and "Invalid partition table" error in spft v3.xx
I've found many users are facing this problem, if it will fix here it will be great help for them
Just tell me what to do next
lexileone said:
Thanks for replying, i almost lost my hope of fixing this problem
Now after trying it says:
1) after format+download it says no space error
2)then i tried firmware upgrade i'm getting " Failed to get PMT info " and "Invalid partition table" error in spft v3.xx
I've found many users are facing this problem, if it will fix here it will be great help for them
Just tell me what to do next
Click to expand...
Click to collapse
K, Try this for a change...
Assuming u already have all the required drivers installed (get it via google search, if not), use the latest sp flash tool (it does matter), browse your scatter file (i recommend u use the Stock JB/KK/LP) and goto the format tab (next to the download tab) and do an auto format. Now goto the download tab and do a format all+download and finally firmware upgrade (all this without the battery)... Now start your phone. This works fine for me when my phone get soft-bricked. However u must remember that formatting all may have risk of your NVRAM getting formatted and so loss of IMEI, but you can always have it fixed via AT command.
Shahbaz23 said:
K, Try this for a change...
Assuming u already have all the required drivers installed (get it via google search, if not), use the latest sp flash tool (it does matter), browse your scatter file (i recommend u use the Stock JB/KK/LP) and goto the format tab (next to the download tab) and do an auto format. Now goto the download tab and do a format all+download and finally firmware upgrade (all this without the battery)... Now start your phone. This works fine for me when my phone get soft-bricked. However u must remember that formatting all may have risk of your NVRAM getting formatted and so loss of IMEI, but you can always have it fixed via AT command.
Click to expand...
Click to collapse
Thanks for replying :cyclops:
I was using spft ver 5.1516.00
while auto format i was getting errors, in v5 it says BROM ERROR: S_DL_READ_PT_FAILE(5073), only v3.1328 can format it successfully while others v3 are getting invalid range error[I think this place will give some clue of what's happening]
ok then in format+download section( using spft V5)
format 100%
boot loader 100%
just after few seconds again no space error
Now in firm-upgrade section
again error failed to get pmt info
thanks for trying mate
now I have some hope for this device to be fixed
i'm not worrying about imei
anybody there plz bring my phone back to life
Help Guys I'm waiting for Ur Replies
PLzz!!
lexileone said:
Help Guys I'm waiting for Ur Replies
PLzz!!
Click to expand...
Click to collapse
Given your desperate condition, go with this:
Re-install the drivers and spftool from here: http://d-h.st/7CL
Use a different USB wire (maybe your I/O port of USB wire is damaged, happened with me once).
Then retry the method listed above of formatting, downloading and upgrading.
Hope this helps.
P.S.: I am not an expert so I couldn't understand the errors, but looks like these are common errors so you should get your phone back alive. :good:
Shahbaz23 said:
Given your desperate condition, go with this:
Re-install the drivers and spftool from here: http://d-h.st/7CL
Use a different USB wire (maybe your I/O port of USB wire is damaged, happened with me once).
Then retry the method listed above of formatting, downloading and upgrading.
Hope this helps.
P.S.: I am not an expert so I couldn't understand the errors, but looks like these are common errors so you should get your phone back alive. :good:
Click to expand...
Click to collapse
still getting invalid Pmt error on firm upgrade
and no space in download
plz help
Facing the exact same problem with my phone too.. Someone please help.
Is there any senior members who can help us?
Make full format (including calibration data & boot loader) then flash with jellybean
Auto format not make full format some data is not earse . make full format then flash with jellybeam stock rom
(Use latest sp flashtool
Without battery
Check Usb pin & cable are rightly connected )
Chinmayhegde said:
Auto format not make full format some data is not earse . make full format then flash with jellybeam stock rom
(Use latest sp flashtool
Without battery
Check Usb pin & cable are rightly connected )
Click to expand...
Click to collapse
But how
i can't see format with bootloader option in format tab
Is there Any other way to do this(may be manual format will work, but dont Know How to do)
This problem needs to be solved
Well thanks for trying
I hope we will get rid of this problem soon
lexileone said:
But how
i can't see format with bootloader option in format tab
Is there Any other way to do this(may be manual format will work, but dont Know How to do)
This problem needs to be solved
Well thanks for trying
I hope we will get rid of this problem soon
Click to expand...
Click to collapse
are you triad manual format including calibration data?
Chinmayhegde said:
are you triad manual format including calibration data?
Click to expand...
Click to collapse
Yes, the format was successful but still get same errors while downloading
PLz guyz Help !!!
lexileone said:
Yes, the format was successful but still get same errors while downloading
PLz guyz Help !!!
Click to expand...
Click to collapse
Change your stock rom for flashing kitkat or jellybean / wiko_rainbowlollipop official stock rom
use older spflash tool
then also u get same error service center is a batter option
Chinmayhegde said:
Change your stock rom for flashing kitkat or jellybean / wiko_rainbowlollipop official stock rom
use older spflash tool
then also u get same error service center is a batter option
Click to expand...
Click to collapse
In service center people are saying its board fault and it have to be replaced (pricing 3K)
But i'm sure the board is working
its any other problem
Have u tried both versions of sptools .format and download should work.try a different cable.if nothings working try adb from pc
micromax a120 1931 said:
Have u tried both versions of sptools .format and download should work.try a different cable.if nothings working try adb from pc
Click to expand...
Click to collapse
Thankz tell me more about adb from pc
lexileone said:
Thankz tell me more about adb from pc
Click to expand...
Click to collapse
1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
2. Open and run as admin - SPMultiPortFlashDownloadProject.
3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
4. Open factory database and select the .mdb file.
5. Click scatter file - and select the .txt scatter file.
6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
8. My recommended :
under sensor 1 selectv5647_raw
under sensor 2 select:hi704_yuv
under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
(if doesnt work change again and again)
9. Select high speed and no battery (I think no need to do).
10. Simply close the Tool. then open, SP flash tool
11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.
Then reboot your phone and check... display is ok ?
If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
You have to do repeatly, until, you are getting display normal.
The same thing for camera's working also. Do this ..I doubt adb will work just temme if it fixes it...
Hello,
I tried to root my phone and everything worked well untill i wanted to install Android 7 Beta on my Huawei Mate 8 (NXT-L29), so i flashed (i think a wrong) a update.zip and as i restarted my phone it didnt boot anymore! Anything i tried wasnt working, so i hope you guys could help me!
Thanks in advance!
EddiFaddy said:
Hello,
I tried to root my phone and everything worked well untill i wanted to install Android 7 Beta on my Huawei Mate 8 (NXT-L29), so i flashed (i think a wrong) a update.zip and as i restarted my phone it didnt boot anymore! Anything i tried wasnt working, so i hope you guys could help me!
Thanks in advance!
Click to expand...
Click to collapse
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
omerus10 said:
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
Click to expand...
Click to collapse
Thanks a lot! I will try! I will reply if it worked or not
omerus10 said:
download this software and follow the instructions to unbrick your phone then choose the firmware you want to update it........root from the beginning carefully
+ttp://whw.needrom.com/download/huawei-mate-8-nxt-l29-unbrick-firmware/
Click to expand...
Click to collapse
Ok, i did follow the steps and it still doesnt boot! What should i try next?
If you installed an update zip it probably wants the stock recovery which you can get in the development thread on this forum. Flash that through fastboot then throw a folder named dload with an update.app in it on your sd card. Phone off hold power vol up and vol down until it brings you to a circle with emui inside. Should run fine after that. If not use the stock recovery to factory reset.
The reason your phone won't boot is because out never encrypted itself.for some reason that means life or death to mate 8 firmware
EddiFaddy said:
Ok, i did follow the steps and it still doesnt boot! What should i try next?
Click to expand...
Click to collapse
when you start the flash.all.bat and you see the unbrick message your phone should be busy and install the above official firmware and recovery.If not run it again disconnect your phone and connect it again when the unbrick message shows.To me worked fine.You must have your phone in fastboot off course
I'm also one of the fools that got his phone stuck in the boot... it boots up till the Huawei logo and after that nothing. I've tried several solutions but still no luck.
I've3 got the Nougast recovery from Bulywolf (or something) and i've tried flashing different roms but no luck so far. I also made the mistake to change the data partition from f2 to ext4... I guess that caused all the problems but how do i solve it?
It is actually doing my head in...
I managed to install the first file from the rollback tutorial... It said it was succesfull but now I'm still stuck seeing the Huawei logo... So I guess it didn't work
Edit: Managed to get in! But it says my version is NRD90M test-keys....
Chippie_83_ said:
I managed to install the first file from the rollback tutorial... It said it was succesfull but now I'm still stuck seeing the Huawei logo... So I guess it didn't work
Edit: Managed to get in! But it says my version is NRD90M test-keys....
Click to expand...
Click to collapse
1 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&version=373426&siteCode=nl
2 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&version=373438&siteCode=nl
put those in dload map at sdcard...first make the small file after let him reboot and flash the 1.68gb file also in erecovery.
I have a P9lite dead too
Hi guys i have a p9 lite in boot loop because i tried (cause i´m fool) to update from file in 3 buttons way, i don´t have frp unlocked and bootloader neither how can i fix this? the version i tried to update is the VNS-L23C605B329_DATA_VNS-L23_hw_la thanks!
Kcetin20 said:
1 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&version=373426&siteCode=nl
2 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&version=373438&siteCode=nl
put those in dload map at sdcard...first make the small file after let him reboot and flash the 1.68gb file also in erecovery.
Click to expand...
Click to collapse
I love you man! :highfive:
You are some sort of GOD to me now!
Hail to the king!
(In case you wonder: yes it works like a charm!)
djbeatmaker said:
Hi guys i have a p9 lite in boot loop because i tried (cause i´m fool) to update from file in 3 buttons way, i don´t have frp unlocked and bootloader neither how can i fix this? the version i tried to update is the VNS-L23C605B329_DATA_VNS-L23_hw_la thanks!
Click to expand...
Click to collapse
Are you sure you have right phone version VNS-L23?
You wanted to update to B329 which is Android 7.0 right? If so, put the right package to downgrade to MM and then try three-buttons way.
yeah my device is the VNS-L23C605B120 and i can´t find any update.app that could work, the device stay in logo mode when I tried to downgrade it or reflash it..
Volenir said:
Are you sure you have right phone version VNS-L23?
You wanted to update to B329 which is Android 7.0 right? If so, put the right package to downgrade to MM and then try three-buttons way.
Click to expand...
Click to collapse
djbeatmaker said:
yeah my device is the VNS-L23C605B120 and i can´t find any update.app that could work, the device stay in logo mode when I tried to downgrade it or reflash it..
Click to expand...
Click to collapse
I can't downgrade to 6.0 It says that my package it;s not compatible with my phone... I'm from Romania, but I have a VNS-L31C432B336 that it's registered in UK..
Hello there
Do you have access to TWRP or Revolutionary recovery? If so, you can check on google for "Huawei P9 Lite oeminfo", downloadit, flash zip via recovery(TWRP or Revolutionary), then try to force update you phone by holding all 3 buttons when phone is booting up, make sure that you have update.app in dload folder on sdcard.
DON'T FORGET TO SAVE YOUR BOOTLOADER UNLOCK CODE!!!
Kcetin20 said:
1 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&version=373426&siteCode=nl
2 : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&version=373438&siteCode=nl
put those in dload map at sdcard...first make the small file after let him reboot and flash the 1.68gb file also in erecovery.
Click to expand...
Click to collapse
I was in Nougart on test keys, so i downloaded the first file, installed it and it restarted my phone. I set everything back up and checked I was still on test keys.
Do I have to flash the larger second file as well?
djbeatmaker said:
yeah my device is the VNS-L23C605B120 and i can´t find any update.app that could work, the device stay in logo mode when I tried to downgrade it or reflash it..
Click to expand...
Click to collapse
Hi bro!
Could you find something for your version? I also have the same model and I have a hard brick, could you solve your mistake?
Could you give me the official firmware link for this model (VNS-L23C605B120) please?
THAANKS!!
well, here is some you can try, find a downgrade update.app, later re flash it with the according restore update.app, it will end to 97% but it`ll work enough to start the cellphone and install the custom twrp recovery and make an good install.
Chippie_83_ said:
I managed to install the first file from the rollback tutorial... It said it was succesfull but now I'm still stuck seeing the Huawei logo... So I guess it didn't work
Edit: Managed to get in! But it says my version is NRD90M test-keys....
Click to expand...
Click to collapse
Hi I'm on your same version NRD90M and I also know that now you solved the problem but, the way you solved it doesn't work for me, I installed the first file but the second one failed... Can you please help Me?
Chippie_83_ said:
I managed to install the first file from the rollback tutorial... It said it was succesfull but now I'm still stuck seeing the Huawei logo... So I guess it didn't work
Edit: Managed to get in! But it says my version is NRD90M test-keys....
Click to expand...
Click to collapse
Hello, could you please tell me how you managed to get in.! my VNS-L21 has stuck on the Huawei logo.. and can't do nothing. I can't even turn my phone off. :good:
willreth21 said:
hello, could you please tell me how you managed to get in.! My vns-l21 has stuck on the huawei logo.. And can't do nothing. I can't even turn my phone off. :good:
Click to expand...
Click to collapse
press vol down and power button for some time. It will work. I have the same model and inhave managed to get out of several bricks by using this method
Hola a todos.alguien logro pasar del wifi+ sin la opcion de DC PHOENIX??
Hi, last week I used FF to force download build MHA-L29 8.0.0.360(C10) on my MHA-L28C185B188 (I didn't know I would be in trouble)
After the update finished downloading it rebooted the phone, then was stuck on erecovery since then, I tried wipe cache / factory reset but still it didn't boot up.
I can't use fastboot method for flashing because the bootloader is locked, so is FRP.
I tried different UPDATE.APP files from Oreo MHA-L29 8.0.0.360(C185) using the up/down volume method but the update always fail at 5%
So for those of you who know about flashing, is my phone dead ?
Uhh I had the same question on my C185 and then I did not cheer for that compilation change. Rebrand to C10 did you try or can not you?
cobraxxx123 said:
Uhh I had the same question on my C185 and then I did not cheer for that compilation change. Rebrand to C10 did you try or can not you?
Click to expand...
Click to collapse
I can't flash with fastboot because it is locked, so I can't rebrand.
dlhak said:
I can't flash with fastboot because it is locked, so I can't rebrand.
Click to expand...
Click to collapse
Command adb : fastboot oem unlock "number unlock"
i did the exactly the same thing after 1 day it get hard bricked i couldn't even charge it. Is it under warranty? take it to service centre.
bidule1970 said:
Command adb : fastboot oem unlock "number unlock"
Click to expand...
Click to collapse
FRP is locked so I can't unlock bootloader.
when the battery empties you are dead.It will hard brick. Service centre have c185 stock. They will install it with sd card.
Szilard666 said:
when the battery empties you are dead.It will hard brick. Service centre have c185 stock. They will install it with sd card.
Click to expand...
Click to collapse
I took it to them they said they couldn't fix it
was it under warranty?
Szilard666 said:
was it under warranty?
Click to expand...
Click to collapse
I don't think so, their service is crap here anyway ....
One quick question, does dload method work with Oreo ? or am I spending days trying different firmware for nothing ?
dlhak said:
I don't think so, their service is crap here anyway ....
One quick question, does dload method work with Oreo ? or am I spending days trying different firmware for nothing ?
Click to expand...
Click to collapse
Try this one: http://androidhost.ru/KR
It should downgrade you back to C185B186 nougat.
Well, if you can do dload.
But dload does work for nougat, I've done it myself but I went flash oeminfo of AL00C00 then dload to B115. It worked fine for me.
yes this should help,because i think you need the original dload for c185 which only service centre has. But try this I hope it will help.
ante0 said:
Try this one: http://androidhost.ru/KR
It should downgrade you back to C185B186 nougat.
Well, if you can do dload.
But dload does work for nougat, I've done it myself but I went flash oeminfo of AL00C00 then dload to B115. It worked fine for me.
Click to expand...
Click to collapse
I am still downloading the file Ill let you know if I get anything, really appreciate the help guys <3
ante0 said:
Try this one: http://androidhost.ru/KR
It should downgrade you back to C185B186 nougat.
Well, if you can do dload.
But dload does work for nougat, I've done it myself but I went flash oeminfo of AL00C00 then dload to B115. It worked fine for me.
Click to expand...
Click to collapse
Szilard666 said:
yes this should help,because i think you need the original dload for c185 which only service centre has. But try this I hope it will help.
Click to expand...
Click to collapse
I'm losing hope, the file didn't work, sd card formated to FAT32, upgrade always fail at 5% ......
Software install failed!
dlhak said:
I'm losing hope, the file didn't work, sd card formated to FAT32, upgrade always fail at 5% ......
Software install failed!
Click to expand...
Click to collapse
You could always use dc-unlocker. It cost money, but cheaper than service centre.
ante0 said:
You could always use dc-unlocker. It cost money, but cheaper than service centre.
Click to expand...
Click to collapse
used that, 15 euros, for nothing, FRP / Bootloader stilll locked, no answer from their support yet.
Hi, i had similar problem...download official firmware from here forum.xda-developers.com/mate-9/development/rom-service-roms-t3693545
Then put the firmware on a blank formatted sd card 8g or more, power off mate 9 device, insert sd card, then hold vol up and down and power keys until you see emui update screen, this procedure forces the phone to boot up from the sd card. this put everything back to stock and works perfect now.
Phone bricked dead. Plz close thread.
you can use funky huawei it will help, if you can boot into erecovery
dlhak said:
used that, 15 euros, for nothing, FRP / Bootloader stilll locked, no answer from their support youtube.com/watch?v=ftq6Lf_A9dw&index=1&list=LLHsMxa-VSnu11mI42uxe8Dg
youtube.com/watch?v=LEcDiI3xsfQ&list=LLHsMxa-VSnu11mI42uxe8Dg&index=3
Click to expand...
Click to collapse
Hey everyone!
I know there are threads here about updating the Axon 7 already. I've pretty much tried everything I've read on here but I still can't seem to update my Axon 7 which is currently in version A2017GV1.0.0B03.
I've tried downloading from the update files from the German site, which didn't work & also download the B06 from the download centre, which also didn't work.
The update app doesn't detect any update files & when I try to update via recovery it gives me an error saying footer error.
Would really appreciate some help here.
Thank you.
1.0.0 - so, you should do Marshmallow higher up to b11, then try to do Nougat update version that you want.
marik1 said:
1.0.0 - so, you should do Marshmallow higher up to b11, then try to do Nougat update version that you want.
Click to expand...
Click to collapse
Thank you for the suggestion Marik. But the problem I have at the moment is that my phone doesn't detect the update.zip files I put onto my SD card & even if I tried to flash it via recovery, it fails.
jcian135 said:
Thank you for the suggestion Marik. But the problem I have at the moment is that my phone doesn't detect the update.zip files I put onto my SD card & even if I tried to flash it via recovery, it fails.
Click to expand...
Click to collapse
First look at the back of the phone and be sure it's an A2017G. If it is, and you don't care about losing all data, just use MiFlash. You can get the idea of how to use it by looking at my DFU unbrick guide. Just download the latest miflash package there is, use adb and issue 'adb reboot edl' and skip to the part where you get edl by shorting a testpad on the guide. There you will be able to flash the FULL_EDL package with no problemo
Common trouble is that people rename stock pack - there is "update.zip" inside folder in zip. Check is that not dual zipping.
@marik1 & @Choose an username...
Thanks for the help guys. I feel incredibly dumb right now coz all I really had to do was just put the update.zip into my internal storage. It's updating now. *facepalmed to the moon & back*
jcian135 said:
@marik1 & @Choose an username...
Thanks for the help guys. I feel incredibly dumb right now coz all I really had to do was just put the update.zip into my internal storage. It's updating now. *facepalmed to the moon & back*
Click to expand...
Click to collapse
lol