Related
Hello,
In order to install the latest Lollipop 5.1 beta on Ascend Mate 7, please follow the steps below:
1. Download the update file from here
2. Connect your phone to the computer
3. On the root of the SD card, create a folder named dload
4. In the dload folder, copy the update.zip file. Do not unzip it
5. Disconnect the phone from the computer
6. Go to settings-> menu-> local update
7. Select the package
8. Confirm the upgrade
9. Wait for the update to complete
10. After the phone reboots, i reccommend performing a factory reset, from the settings
Enjoy Lollipop on your kick ass Mate 7
P.S. Please note that this update is for the 2 GB version of the Mate 7
Hi! But this image is from T7-L09 or L10? Gold or Silver?
And what about the TL10?
Sent from my HUAWEI MT7-TL10 using Tapatalk
Software install failed on my 2gb MT7-L09
Only flash original 137, then 5.1. In case of changes it is not working.
FW is not the MT10 for the MT09.
137.
https://mega.nz/#!nIQVnLzK!JZerWHy66gCzpNQHB58at6mynNzulP5NARQJnLsmaEQ
Dear All,
I confirm as well that the Update from Local failed too ( MT-L09 )
Error Message : Update Failed, press power botton to switch off your phone
Best regards
thats what mines is getting
---------- Post added at 03:05 PM ---------- Previous post was at 03:01 PM ----------
Do i need to extract the update.app out the zip file?
Can anyone confirm if this is working?
For those experiencing the issues i did when trying to update.zip on L09
1. Download SP03 Rom here. https://mega.co.nz/#!fVIUCbaD!JZerWHy66gCzpNQHB58at6mynNzulP5NARQJnLsmaEQ
2. Connect computer and set phone into "USB Mode"
2. Extract the dload folder from the rom directly into the SD Root
3. Go into phones Settings > update> menu > local update to apply the update
4. The phone will reboot. Then update
5. Delete the update.app in the SD/dload foler (old stuff)
5. Download the Update zip from
https://mega.nz/#!0BxHWB4Q!P34e3RI-hQT1ZY2WnfOosGmkq2wlr6NViq6ehQuWN5k
6. Place the update.zip directly into the SD/dload folder
7. Go to settings > update > menu > local update to apply update
8. the phone will reboot and install update. It should be working perfect.
Hope this helps!
It's still working if i have the SP05 version instead of SP03 ?!
I wish I could upgrade without downgrade because Its a pain to backup and re install everything.
oh right, I am on SP04 will download these files and give it a shot. thanks.,
I am at version l41update failed
Anyone confirm this working?
Also what about root?
charlieb620 said:
Anyone confirm this working?
Also what about root?
Click to expand...
Click to collapse
Root
http://www.android-hilfe.de/root-cu...65-root-unter-lollipop-bekommen-new-post.html
How big is this update zip?
0,88 GB
Please need help I downgrade to 137 try to update lollipop from local but when I hit uodater from my phone it said unfortunately stopped?!what can I do now?
Ok again has anyone successfully downgraded than updated to lollipop?
charlieb620 said:
Ok again has anyone successfully downgraded than updated to lollipop?
Click to expand...
Click to collapse
Yes me downgrade fROM 141 to 137 then update to 5.1
For Rooting, Unlocking, Installing Recovery in HONOR 4C MARSHMALLOW,,, Go Here [ROOT][MARSHMALLOW][HONOR 4C] Root, Recovery & Bootloader Unlock by HassanMirza01
For Rooting, Unlocking, Installing Recovery in HONOR 4C KITKAT,, Go Here [ROOT][KITKAT][HONOR 4C] Honor 4C Root, Recovery & Bootloader Unlock by HassanMirza01
For Rooting, Unlocking, Installing Recovery in HONOR 4C LOLLIPOP,, Go Here [ROOT][LOLLIPOP][HONOR 4C] Honor 4C Root,Recovery, Bootloader Unlock by @HassanMirza01
DESCRIPTION:
Hey Guyz Welcome Again in my next Tutorial... Today Am gonna show How to Upgrade/Update your HONOR 4C to Android 6.0 Marshmallow.
If your Gonna Step in to Marshmallow from Kitkat or Lollipop, didnot Mattar Both process take same time.....
Lets move on it...
PREREQUISITES:
First of All you should have the files needed for that....
1) Indian B330 ROM Lollipop
2) Indian B370 Update OTA zip
3) Indian B510 Marshmallow OTA zip
4) Indian B521 OTA update zip
Links for these files.....
[UPDATED]Indian B330 ROM Lollipop and decryption Key is !ldp5f_t_y7JaPIjCRugiYuS3QOHezIWgQoC2RwCCjrc
Indian B370 Update in form of zip file
Indian B510 ROM Marshmallow update in zip form
B521 from B510 Marshmallow OTA zip update
In Case you have B390 build, flash this zip directly to get B521 ROM Marshmallow
B390 to B521 Marshmallow update direct
PROCEDURE:
Now First thing is if you dont have the indian ROM,,, i have the guide to Flash any ROM on your 4C even of different Regions....
Here is the Link for that Thread!! Guide to Flash Any ROM
You just have to flash the first ROM which is of G-Play Mini's ROM but dont worry....its the solution for everything for 4C...
Now Extract the B330 lollipop ROM, you will have the update.app file of about 2.5GB...
Backup your all data first,,, It may wipe your all data.... dont blame me then...
If you are on currently B390 or any other Build, Flash directly by Putting this update.app in dload folder and then put dload folder in Root of your SD Card...now go to Settings>Updater and then press Menu and then Local Update... you will find the pkg here... just install it...
Now Flash the Vendor pkg present in same folder of B330 if you are converting to indian ROM... flash vendor's update.app in same way as you flash update.app of B330 ROM...
Now you should have B330 installed successfully... and you should have Build number CHM-U01C636B330 otherwise you're gonna get error of 5%
Now Rename the B370 update zip to update.zip and put it in dload folder in root of your sd card..
Now go to updater and then local update... And install update too same as before!!, it will install that update.zip of B370 ROM..
Now you have B370 installed....
Now times to flash the B510 Marshmallow ROM.... rename Marshmallow file to update.zip file and then do the same procedure we do for installing B370 ROM...
Now flash the Patch for B510 by HassanMirza01.zip file attached below using twrp recovery (Link and method for TWRP) and you will have the option of local update in B510... then flash B521 using local update method.
Then do same for B521 update like we do with B510.... after successfully flashing... Phone will booted again and BOOM!!
Latest Marshmallow now installed
Also Here is the Link for Full Marshmallow Rom in case above MM file stuck or whatever, Link for Full Marshmallow ROM B510
Flash it on B370 or G Play mini ROM, it will install whole Marshmallow ROM.
For any question, ask below.....
In Case you dont like this Rom, and you wanna downgrade to Lollipop again, here is the Link for Lollipop Rom
Download it, unzip it, put dload folder in root of sdcard. Now MM dont have local update option so dial code *#*#2846579#*#* in MM Rom, you will see software upgrade option there... Press it and your done
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
XDA: DevDB Information:
[ROM][HONOR 4C] UPGRADE your 4C to Android 6.0 Marshmallow by @HassanMirza01
Contributors:
@HassanMirza01
Megha Shyam Chinna for Providing Links
Version Information:
Status: Stable
Stable Release Date: 2015-09-28
Created on: 2016-02-17
Last Updated on: 2016-04-13
Reserved
after i install B370 and try to install M after 5% its failed any idea ?
help
help please i got bootloop when i tried to root marshmallow what i can do ? sorry for my bad english
i follow the guide step by step :C
@mada222 from which version u are converted to M ??
@barza69 u swipe on twrp screen ?? After rooting, flash stock recovery...
inshaalmirza said:
@barza69 u swipe on twrp screen ?? After rooting, flash stock recovery...
Click to expand...
Click to collapse
yes i swipe wipe cache after rooting im gonna flash stock recovery then im gonna flash b330 thanks bro
I have a question, which recovery you use to flash the zip file?
@Paco_marine stock recovery can flash official zip files OTA updates.. But dont try this method yet... Wait for the final release.
inshaalmirza said:
@Paco_marine stock recovery can flash official zip files OTA updates.. But dont try this method yet... Wait for the final release.
Click to expand...
Click to collapse
OK thanks for your advice.
Hi
I have G Play Mini with Lollipop 5.1.1 ,rooted and unlocked
Model CHC-U01
Compilation CHC-U01C432B310
I can update to Marshmallow ????
Thnks
Boot loop !!
I did it wrong bro, and now im stuck in boot loop , i tried to flash my old rom again using v+ + v- and power off but it doesn't work ! need help
For bootloop, flash whole lollipop rom wid fastboot.. Flash boot, recovery,system and cust
inshaalmirza said:
For bootloop, flash whole lollipop rom wid fastboot.. Flash boot, recovery,system and cust
Click to expand...
Click to collapse
Sorry , can you specify your answer ?
---------- Post added at 07:51 PM ---------- Previous post was at 07:22 PM ----------
inshaalmirza said:
For bootloop, flash whole lollipop rom wid fastboot.. Flash boot, recovery,system and cust
Click to expand...
Click to collapse
I flashed cust.img , recovery.img , system.img and boot.img separately using adb fastboot & Huawei update extractor , after flashing them i retried to flash the update again using three buttons and the same massage "Software install failed !, incompatibility with current version"
Flash chc rom named middle pkg first before upgrading to marshmallow...for non indian users
inshaalmirza said:
Flash chc rom named middle pkg first before upgrading to marshmallow...for non indian users
Click to expand...
Click to collapse
WoW thanks you it worked now ! my phone get back to live :good::good:
@Ali.Feraoon gud luck bro... Hit thanks if it helps you
What new feature in B510 ?
Good work Bro, have you tried to root it?
Thanks for the great guide! You rock! May Allah bless you!
Owners of the factory-unlocked, dual SIM Snapdragon variant labelled as 'a5_dug' in the bootloader mode, will be pleased to know that the update is now available from your stock Lollipop ROM.
Before you begin
Preparation
If you are not using the official update tool, and wish to use OTA files uploaded here, reboot your phone in to its bootloader, and ensure that a5_dug is displayed. This update may not apply to other models, regardless of whether they are dual SIM or not. It most certainly will not apply to the 816G model which uses a MediaTek chipset.
You must ensure that you have 2GB free on the internal eMMC storage before continuing if you wish to update using the stock update tool. The update tool does not download to the microSD card.
The update does not update, unfortunately, the HTC Sense user interface. It uses the same Sense version as Lollipop did, with some minor changes.
Update contents, simplified
Android 6.0.0
HTC Sense 6.0
Additional Google features
Installation
For phones running a stock ROM earlier than Lollipop 5.0.2
Please update your phone to 5.0.2 and proceed to follow the instructions below if you wish to update through the official update tool.
For phones running stock Lollipop 5.0.2
The update is in two parts for phones running stock Lollipop 5.0.2. The first part is less than 60MB (typically), and prepares the phone for the installation of the second, main part, which is around 1.1GB.
Open the 'Settings' app.
Scroll down and select 'About'.
Tap 'System update'
Agree to download the update by pressing 'OK'.
Once downloaded, 'System update downloaded' appears in the notification tray.
Tap this, and tap 'Install'.
Then repeat for the second part.
For phones running custom software
(investigating)
I just got HTC Mail update only!!!
The update could be available around 01 - 02 week, hope so
@gwhite5 seriously!??? No Sense 7 ?!!!
Its great news but plz provide me with the marshmallow ROM for dual sim models with root capabilities! ? thanks in advance
Any news about the a5_dwg models ?
I have A5 Dug (816w).
After OTA update I have Android 6 with Sense 7, not Sense 6...
For devices on custom recovery
I am running official ROM but on custom recovery TWRP and rooted. My question is will this update will be installable on this setup?( Haven't tried yet)
Also I tried rolling back to stock recovery but I have removed few system app in past without backup is there any way to get the apks for them . I got error for HTC Car app . Also will need help on how to install it as a system app, cuz its not avaialble on "/system/priv-app/Automotive_Home/Automotive_Home.apk" .
Any help is appriciated.
TIA
I finally managed to reinstall the automotive_home.apk as system app, i moved back to stock recovery and then tried the OTA update once again still getting the same error " unexpected content" on that path.
could someone please make a twrp backup of the android 6 on the a5_dug ?
@mshtob its already done bro check updates we are still waiting for a5_dwg
pratik14994 said:
@mshtob its already done bro check updates we are still waiting for a5_dwg
Click to expand...
Click to collapse
No sorry I meant a twrp backup because I have twrp and cyanogen mod I was hoping someone could have a twrp backup of stock marshmallow rom so I can restore it
I have A5_DUG (CID: HTC__622 / Asia_HK) and I didn't get the update yet...
Is it because it's rooted with many changes? I didn't have this problem with the previous update so is it just not released yet for my CID?
EDIT: I noticed that version-main is blank in the bootloader
Hi guys
I have desire 816 a5 dug..and i have an update to marshmallow in tow step.
I change my custom recovery to stock and i done full unroot.
When i tap to first step(54mg) after setup and reastart, my phone wait on white screen with htc logo for to long..i reastart again my phone but nothing will happen.
And i have to return my twrp back up to be true.
What should i do?
Thanks
THE_MOJTABA said:
Hi guys
I have desire 816 a5 dug..and i have an update to marshmallow in tow step.
I change my custom recovery to stock and i done full unroot.
When i tap to first step(54mg) after setup and reastart, my phone wait on white screen with htc logo for to long..i reastart again my phone but nothing will happen.
And i have to return my twrp back up to be true.
What should i do?
Thanks
Click to expand...
Click to collapse
you can use this MM backup
http://forum.xda-developers.com/desire-816/general/twrp-backup-htc-desire-816-a5dug-dual-t3336060
Extract recovery from the OTA file.
It happened to me and I extracted the recovery image from the downloaded OTA update.
copied the OTA zip file to computer. unzipped and extracted the firmware.zip file from it. Flashed recovery again to this new recovery (basically both are stock). This worked for me and i can go till the recovery screen.
---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
THE_MOJTABA said:
Hi guys
I have desire 816 a5 dug..and i have an update to marshmallow in tow step.
I change my custom recovery to stock and i done full unroot.
When i tap to first step(54mg) after setup and reastart, my phone wait on white screen with htc logo for to long..i reastart again my phone but nothing will happen.
And i have to return my twrp back up to be true.
What should i do?
Thanks
Click to expand...
Click to collapse
It happened to me and I extracted the recovery image from the downloaded OTA update.
copied the OTA zip file to computer. unzipped and extracted the firmware.zip file from it. Flashed recovery again to this new recovery (basically both are stock). This worked for me and i can go till the recovery screen.
need lolipop recovery guys
Tnx for your help
kyyubikiller said:
It happened to me and I extracted the recovery image from the downloaded OTA update.
copied the OTA zip file to computer. unzipped and extracted the firmware.zip file from it. Flashed recovery again to this new recovery (basically both are stock). This worked for me and i can go till the recovery screen.
---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
It happened to me and I extracted the recovery image from the downloaded OTA update.
copied the OTA zip file to computer. unzipped and extracted the firmware.zip file from it. Flashed recovery again to this new recovery (basically both are stock). This worked for me and i can go till the recovery screen.
Click to expand...
Click to collapse
I used recovery from "firmware.zip" file but did'nt work..after setup and reastart, my phone stoped on whit screen whit htc logo...i dont now what can i do anymore.
---------- Post added at 02:11 AM ---------- Previous post was at 02:06 AM ----------
Roberto Nigel said:
you can use this MM backup
http://forum.xda-developers.com/desire-816/general/twrp-backup-htc-desire-816-a5dug-dual-t3336060
Click to expand...
Click to collapse
Tnx but this backup did'nt work too
THE_MOJTABA said:
I used recovery from "firmware.zip" file but did'nt work..after setup and reastart, my phone stoped on whit screen whit htc logo...i dont now what can i do anymore.
---------- Post added at 02:11 AM ---------- Previous post was at 02:06 AM ----------
Tnx but this backup did'nt work too
Click to expand...
Click to collapse
How so? .. If you'r a5_dug it should work
tell me what have you done with it?
Roberto Nigel said:
How so? .. If you'r a5_dug it should work
tell me what have you done with it?
Click to expand...
Click to collapse
yes im sure my phone is a5_dug.
when i want to extract this back up, i see an error in end of extract process (99%). but the files will be extract correctly,apparently
i copied files to sd card and done full wipe, i restore this back up..but the process was ok until 60%, but suddenly the process will be 100% and writes successful and done. but after restart my phone stop in white screen with htc logo!
i repair the .zip back up but it dose not change.
i think the .zip file is broken-down.. i downloaded it with download manager.
Roberto Nigel said:
How so? .. If you'r a5_dug it should work
tell me what have you done with it?
Click to expand...
Click to collapse
fixed.. tnx a lot
the downloaded file was destroyed.
Since lollipop there is no manual update option in huawei updater and even the huawei stock recovery has no or less interface which has no adb sideload option. This became a crunch to flash the update which your friend got and which u dont.
This Method is Universal for all huawei devices
In order to apply ota update using this method , root access is a major requirement so be sure your device is rooted.
If u had twrp recovery , at first flash SuperSu package to root your device (Try systemless root only) .
After successfull root ,flash stock recovery from twrp and reboot system.
Step 1:
In my case b370 is the last ota i found for kiw-l22 which vsriram92 posted here . Thanks to him for posting the update before 99% users got their update :good:
Download the relevant update package (ota) which you need a relevant base package to install it on . Ex: b360 as base for b370 update
step 2:
just remember the path where u downloaded the package . Install Flashify from playstore or From Here
Select Zip file which is the third option in flashify .
step 3 :
Navigate to the path where u downloaded ota package select the update.zip (ota package).
flashify starts downloading the package to its path asks you for root access .
Grand Su permissions , Select Cwm recovery if flashify asks as the next option.
Now the phone reboots to recovery and starts flashing.
After the ota update , your device will be unrooted . so take a backup of your stock recovery by following below guide.
Enable Usb debugging and connect ur phone to pc.
navigate to adb folder and place twrp.img or recovery.img in adb folder ,open command window from the same folder and type
Code:
adb reboot bootloader
Now type
Code:
fastboot boot recovery.img
or what_ever_its_name.img
now it temporarily boots twrp , take a backup of your stock recovery and then flash twrp for permanent install and then reroot ur device.
Happy flashing :laugh::good:
it gets zip signature verification failed....the method is similar to installing the zip file directly from the recovery but that doesn't work unless zip signature is verified
rbtrai said:
it gets zip signature verification failed....the method is similar to installing the zip file directly from the recovery but that doesn't work unless zip signature is verified
Click to expand...
Click to collapse
You might have installed a zip which is not stock ota update . i haven't posted this without trying . I installed b370 with this method and made this live here .
i downloaded from the link provided above which vsriram92 posted...
rbtrai said:
i downloaded from the link provided above which vsriram92 posted...
Click to expand...
Click to collapse
Were you in b360 before doing this ?
Thanks again Gopi. Another great contribution.
vsriram92 said:
Were you in b360 before doing this ?
Click to expand...
Click to collapse
yes ofcourse
This only for rooted phone ?
I'm having honor 4x unroot and I don't know how to install the ota file. Is there any way for upgrading a phone without root option and in my phone there is no local update option
Ajith san said:
This only for rooted phone ?
I'm having honor 4x unroot and I don't know how to install the ota file. Is there any way for upgrading a phone without root option and in my phone there is no local update option
Click to expand...
Click to collapse
Nope. It was there in EMUI 3 previously. Now, we can't unless it has only update.app.
so b370 is only for the ones who gave root access to their phones?
Like your contribution. Perfectly updated to B370.
rajibie said:
Like your contribution. Perfectly updated to B370.
Click to expand...
Click to collapse
great
Hello together, I tried flashing the B360 update for my L21 with this method but unfortunately I did not succeed. I followed every step but when flashify reboots to the stock recovery nothing happens. Just nothing.
I used the file for the L21 that I linked to in this post.
Any suggestions how to get it to work?
Zacki06 said:
Hello together, I tried flashing the B360 update for my L21 with this method but unfortunately I did not succeed. I followed every step but when flashify reboots to the stock recovery nothing happens. Just nothing.
I used the file for the L21 that I linked to in this post.
Any suggestions how to get it to work?
Click to expand...
Click to collapse
Are you on B350D0003 or some earlier firmware? I'm on stock B350, just rooted with Magisk+phh's superuser, and it doesn't want to flash that big file at all; tried flashing OTA update (200MB file) and it failed at 80%, causing a damn bootloop. Gah, I thought my old phone was pain in the ass...
ShadySquirrel said:
Are you on B350D0003 or some earlier firmware? I'm on stock B350, just rooted with Magisk+phh's superuser, and it doesn't want to flash that big file at all; tried flashing OTA update (200MB file) and it failed at 80%, causing a damn bootloop. Gah, I thought my old phone was pain in the ass...
Click to expand...
Click to collapse
I'm on B350D003. After I tried the OTA instead of the full package I came across the same problem with the stock recovery, but when flashing it from TWRP it did flash it, but exited with an error.
No bootloop but as a file was missing for the full update process wifi (and probably bluetooth) are not working.
If you are interrested to solve it, have a look here. It looks like there is a way to fix the problem and we are currently investigating.
Zacki06 said:
I'm on B350D003. After I tried the OTA instead of the full package I came across the same problem with the stock recovery, but when flashing it from TWRP it did flash it, but exited with an error.
No bootloop but as a file was missing for the full update process wifi (and probably bluetooth) are not working.
If you are interrested to solve it, have a look here. It looks like there is a way to fix the problem and we are currently investigating.
Click to expand...
Click to collapse
TBH, I'm on a verge to start building LOS or PAC/Slim/whatever is properly maintained and fast for my own needs and ditch EMUI completely....
I'm searching for other firmwares now via FirmwareFinder, there is a probability that one is a leaked test or something like that, because it simply doesn't want to flash. If I find out something, I'll continue on thread you've linked, to avoid flooding this one.
Hi. Thanks for your guide.
I need to update my phone with several ota updates. I just need to repeat this guide's procedure until updated to the last ota or there is a better way to do that?
Can't update.. Its fake i think.. I m still in B360
---------- Post added at 08:39 PM ---------- Previous post was at 08:37 PM ----------
rajibie said:
Like your contribution. Perfectly updated to B370.
Click to expand...
Click to collapse
How to update step by step.. Mention it plz
Tapan Patel said:
Can't update.. Its fake i think.. I m still in B360
---------- Post added at 08:39 PM ---------- Previous post was at 08:37 PM ----------
How to update step by step.. Mention it plz
Click to expand...
Click to collapse
Just because you can't do it, that doesn't mean it's fake.
Tapan Patel said:
Can't update.. Its fake i think.. I m still in B360
---------- Post added at 08:39 PM ---------- Previous post was at 08:37 PM ----------
How to update step by step.. Mention it plz
Click to expand...
Click to collapse
Just follow the procedure and you will be done
With the Oreo update out, several Honor 8 users have become impatient and want to install the update in advance of their regional releases. This guide will help you accomplish this. I won't be held responsible for any damage to your device including but not limited to bricks, explosions, etc.
Before you upgrade, ensure that
Your bootloader is unlocked. Rebranding involves flashing modified recovery images which isn't possible with a locked bootloader.
You're on a dual SIM device. Chinese FW don't support single SIM devices and you'll lose your IMEI, hence no cellular connection. It is possible however to upgrade to Oreo with SIM working but there are some trade-off(s), read the last section.
Oreo FW doesn't include GApps. However, they can be downloaded from the Huawei AppMarket (comes pre-installed).
The FW is still in beta. Bugs are to be expected. Just know this isn't the place for that.
Step I - Rebrand to Chinese FW
Let us get started. Our first job is to rebrand to Chinese FW. Piece of cake. Just follow the steps below, precisely:
Backup any important data, especially those precious cat photos.
Download this file: https://drive.google.com/open?id=1eQHOfsCidKhE6AxXZKHkwwjfqYEEjCR6. Extract the archive and place the .img inside in your SD card or Internal Phone storage.
Download the two No-Check recoveries and place them in the root of your Internal Phone storage:
Code:
Recovery 1: https://drive.google.com/open?id=0B4SPRmBNsTefSWZLSWxpWGd6QkE
Recovery 2: https://drive.google.com/open?id=0B4SPRmBNsTefSVhxMWFoa01wams
Download Chinese B396 Nougat FW and copy them to /data/update/HWOTA/ folder (create folders if they don't exist):
Code:
Main Update File: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3109/g1699/v143478/f1/full/update.zip
Customization File: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3109/g1699/v143481/f1/full/FRD-DL00_dualcu_cn/update_full_FRD-DL00_dualcu_cn.zip
Reboot your device to TWRP. Navigate to Install > Install Image > Select the .img file > Check OEMINFO as the partition to flash the .img to. Start the install process and wait for it to finish. Don't reboot the device after installation.
We'll now install the modified recoveries. Using either TWRP's terminal or ADB Shell (as root 'su'), execute the following:
Code:
dd if=/sdcard/FRD_RECOVERY_NoCheck.img of=/dev/block/bootdevice/by-name/recovery_a
dd if=/sdcard/FRD_RECOVERY2_NoCheck.img of=/dev/block/bootdevice/by-name/recovery2_a
Let's prepare the installation of the FW. In the same TWRP terminal or ADB Shell, execute the following:
Code:
echo "--update_package=/data/update/HWOTA/update.zip" > /cache/recovery/command
echo "--update_package=/data/update/HWOTA/update_full_FRD-DL00_dualcu_cn.zip" >> /cache/recovery/command
Reboot your device to recovery from TWRP. This time, the device will reboot to NoCheck recovery and start the installation process.
Step II - Flash the Oreo update
The steps to flash to Oreo are same as rebranding. You'll follow the exact same steps as above, keeping the following things in mind:
Your bootloader might relock after the update. Unlock it and flash TWRP again.
There is no need to reflash the OEMINFO file as we've already done that, so skip it.
Instead of installing B396 FW, we'll flash the Oreo firmware. At the time of writing of this guide the latest available firmware was B511:
Code:
Main Update File: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3109/g1699/v142251/f1/full/update.zip
Customization File (Public): http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3109/g1699/v142251/f1/full/public/update_data_full_public.zip
Customization File (OEM): http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3109/g1699/v142251/f1/full/FRD-DL00_dualcu_cn/update_full_FRD-DL00_dualcu_cn.zip
You'll copy the above files to /data/update/HWOTA. Also, modify the commands executed in Step 7 to:
Code:
echo "--update_package=/data/update/HWOTA/update.zip" > /cache/recovery/command
echo "--update_package=/data/update/HWOTA/update_data_full_public.zip" >> /cache/recovery/command
echo "--update_package=/data/update/HWOTA/update_full_FRD-DL00_dualcu_cn.zip" >> /cache/recovery/command
Reboot your device and tada, you're on Oreo, yum, yum!
The alternate way for Single SIM users
It is the same as the above mentioned steps. Follow only Step 2, don't flash the OEMINFO file. However there are some trade-offs like:
The customization file won't flash due to region mismatch so you'll be left with a borked installation i.e. only some system apps, no keyboard, no app store, broken build number, non-working themes, etc. etc.
Remember, we did it all for that pesky SIM so don't complain.
If you face any errors, don't hesitate to slap me in the comments below. I'm waiting...
For models of phones FRD-L09 & L19 - this will be the bricks when upgrading to Oreo. You need to go to the FRD-DL00C00.
S_mak said:
For models of phones FRD-L09 & L19 - this will be the bricks when upgrading to Oreo. You need to go to the FRD-DL00C00.
Click to expand...
Click to collapse
Thanks for the clarification. I'll make it clear in the guide.
EDIT: The guide is updated with DL00 firmware links.
I made it easier to upgrade to Oreo on FRD-L19. Being on 7 Android, changed the location of the phone on FRD-dl00, updated to FRD-dl00c00b396 and via Hwota8 installed FRD-dl00c00b511 (8.0.0.511). Through Magisk v 16.4 got Ruth right.
hi, I'm still XD, in the end I managed to install it on frd-l09 following your guide now I wonder if you can install the g-app and how to flash zip files on recovery .. thanks for your work: ) ps:call and network work...
Markxdx said:
hi, I'm still XD, in the end I managed to install it on frd-l09 following your guide now I wonder if you can install the g-app and how to flash zip files on recovery .. thanks for your work: ) ps:call and network work...
Click to expand...
Click to collapse
Great. You can get GApps Huawei AppMarket. Since we don't have TWRP, you can't flash zip files.
App market is not installed on this firmware..
Markxdx said:
App market is not installed on this firmware..
Click to expand...
Click to collapse
Can you verify the firmware installed correctly, like is the build number correct. Regardless, you cam grab the market from http://a.vmall.com/uowap/index.html
in fact, to install Oreo I had to install it via redlotus, even the Chinese firmware installed with redlotus .. because following your guide, got to the point of restarting from recovery after having put all the codes the phone did not start the installation ..
Can someone post some video about the update and features?
To install Oreo from the Chinese Firmware, I recommend using HuRUpdater, since it is much simpler and faster.
Here's how to do it:
Just create a folder in the sdcard with these 4 files:
HuRUpdater_0.3.zip (https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279)
update.zip
update_data_full_public.zip (rename it to: update_all_hw.zip)
update_full_FRD-DL00_dualcu_cn.zip (rename it to: update_data_public.zip)
IN TWRP:
You only need to flash the HuRUpdater file, the other 3 files will be installed automatically.
Restart Your Device.
You're on oreo.
Before installing Oreo remember that there are no Custom Recovery for this Firmware so you will not be able to flash anything.
(Tested on Honor 8 FRD-L09 with Chinese firmware.)
(Sorry for any grammatical errors.)
Sharath007 said:
Can someone post some video about the update and features?
Click to expand...
Click to collapse
I'd like to see this, too!
Vincy__ said:
To install Oreo from the Chinese Firmware, I recommend using HuRUpdater, since it is much simpler and faster.
Here's how to do it:
Just create a folder in the sdcard with these 4 files:
HuRUpdater_0.3.zip (https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279)
update.zip
update_data_full_public.zip(rename it to: update_all_hw.zip)
update_full_FRD-DL00_dualcu_cn.zip(rename it to: update_data_public.zip)
IN TWRP:
You only need to flash the HuRUpdater file, the other 3 files will be installed automatically.
Restart Your Device.
You're on oreo.
Before installing Oreo remember that there are no Custom Recovery for this Firmware so you will not be able to flash anything.
(Tested on Honor 8 FRD-L09 with Chinese firmware.)
(Sorry for any grammatical errors.)
Click to expand...
Click to collapse
Do you need to rebrand device?
BnK1986 said:
Do you need to rebrand device?
Click to expand...
Click to collapse
You have to rebrand. Regardless, there is TWRP for Oreo so it is now a lot safer to upgrade to Oreo now.
Twrp now can mount partition, or flash zip?
hackslash said:
You have to rebrand. Regardless, there is TWRP for Oreo so it is now a lot safer to upgrade to Oreo now.
Click to expand...
Click to collapse
Link?
Vincy__ said:
Link?
Click to expand...
Click to collapse
It's in the 4PDA forums (Google).
Is it possible to access recovery in Oreo, if yes can I flash Magisk and install V4a ?
hackslash said:
It's in the 4PDA forums (Google).
Click to expand...
Click to collapse
I simply downloaded it from Huawei Multi Tool, but thanks anyway.
---------- Post added at 03:19 PM ---------- Previous post was at 03:18 PM ----------
Pranav Kumar said:
Is it possible to access recovery in Oreo, if yes can I flash Magisk and install V4a ?
Click to expand...
Click to collapse
Yes, you can.
I'm trying to see if you can get root permissions.
You're installing firmware for DL00 but the oeminfofile you provided with the first link is for AL10. Won't that cause any problem?