Hi all!
I did try searching, might be too simple...
New to Android, etc...
Windows and Toshiba taught me to always download original files and archive them for later recovery, drivers, etc... to factory recovery years later when needed.
Now with this...
I think I was at JRN84D (4.1) when purchased on vacation, took OTA update to JRO03D (4.1.1).
At Google, ONLY JRO03D is available.
? Should I hunt around to find and archive JRN84D (or ask for someone else's archive PM) or will JRO03D always be THE factory recover baseline for this device?
?If they replace JRO03D with something else, will those always be then considered the factory baseline? (Or should I keep a progression of images?)
?I think since this is flashed, that my OE file (JR84D) is truly gone forever, since JRO03 is flashed 'over' it, and I can never really factory recover to 'out of the box' state - am I right?
(Trying to get my ducks in a row to start trying Mskip's package...)
THANKS
As long as you have the net Mskips tool will download a stock rom and flash it for you anyway
Sent from my Nexus 7 using Tapatalk 2
ROM/ DISK Drive devices.Failure rate .
There is a huge difference in A Tablet os then the tradition installation of windows. Windows is a compiled bunch of software running on a Disk drive.. High Failure rate.
Android Tablet phone/ devices. These are firmware running on a non destructible ROM CHIP. if you are totally stock..and never change that. There is a pre made so to speak backup built in.. This will restore your device to its original state.
You can download the latest firmware os / kernel from gogle as i see you have found already. Be SURE you have and know how to use the tools to flash the software in case of a non boot situation.. I would not count on the install tools mentions above.. FASTBOOT ADB AND BOOT-LOADER COMMANDS .... If you really want to learn about android and understand arm devices more . Lots of information with a google search..
So what im saying is a Un rooted tablet have a very low almost near software error rate. (A QUICK RESTORE WILL FIX EASLY)
If you are not root and you mess up your tablet simple fix.
If you root your tablet and install a custom recovery.. Then you need to save the tools to install the recovery the recovery files. The Boot-Loader files and the ROM. YOU are using or want to use.. Could be stock ROM CUSTOM ROM. if you use a custom kernel you need this as well.
You should also first boot into the CUSTOM Recovery MADE A NANDROD BACKUP... This will be your ticket to restore the device quickly and easy.
I know this is alot of vague information but it kinda touches what your asking..
Good luck .. Guys feel free to fill in the blanks and correct my mistakes.. OOPS Erica makes no mistakes right .. hehe
THX all - I've , let's see - unlocked, rooted, flashed a new rom, restored 'factory' rom, unrooted and relocked - whew!
I think there is a real problem with terminology for OE roms - both by users and the OE. My device says factory or factory state in it somewhere - but that is clearly not what it means. It means current factory or something like that - and that it will never be back to the out-of-the-box factory state. Apparently, I can only ever get back to the cleared-of-user, current 'factory' state.
Anyway, I've a recovery method and the current rom stored for the future.
Is there a site that store earlier roms?
Hey guys,
I need help.
The story:
My girlfriend has a Galaxy S7 from Sprint, she loves her phone but hates the carrier's splash screen (I think that's what it's called). The animation at the startup of the phone.
She truly hates it.
I want to do something nice for her and remove that from her phone. I think it's possible, I know I can do it, I just need help with the steps.
Laugh and call me names if you want, I'm a iOS user, it works for me, I've always preferred it. My knowledge about Android is limited.
I'm not a complete rook, I've rooted an Android tablet before, I've reloaded a ROM after deleting a few things and bricking said tablet but that's as far as my handheld device tinkering experience goes.
PCs are my cup of tea, I know my way around them, I'm not a developer or anything, I just like messing around and fixing them.
Anyway, all I want are the right directions so I don't ruin her phone.
Do I have to root the device?
If so, what do I use to root said device?
Do I need to install a new ROM to get rid of the splash screen?
Where do I download a stock version (I'm assuming that's what I'd have to install) of her firmware?
If I need to root the device, after installing the stock OS, if I un-root it, will changes be lost?
I apologize if I'm not using the correct terminology, I'm just trying to get my point across as clear as possible.
If this was a PC, what I would do is a clean installation using a stock ISO, making my problem and all the OEM's bloatware disappear.
I'm looking for the equivalent of that, but for her phone.
If there is a better way, or what I'm asking is for some reason not possible please let me know.
Her phone:
Samsung Galaxy S7 930P
Nougat 7.0
P.S.: The reason I want to un-root it afterwards, is that from what I understand you can't use NFC payments if your device is rooted and she really likes doing that.
You can remove it/ change it in two ways.
1. Root it, and change the boot animation, and then unroot. I would not recommend this, as rooting this device is hard if you're unfamiliar with Android devices, plus you need to flash an engineering boot.img, which completely cripples this devices battery and performance.
2. Use the universal firmware for the Sprint device. It will change the boot animation to a screen which just says "Samsung" in white font against a black background till it boots. It looks clean and is un-intrusive, and will get rid of all the Sprint bloatware. I highly recommend using that over trying to root and change the boot animation on her device. It is quite simple to do as well, as all you need to do is download the firmware, (find it here: http://updato.com/firmware-archive-select-model?record=48A2011F925C11E7963AFA163EE8F90B ) and unzip it, and flash it using ODIN (find it here: https://drive.google.com/open?id=0ByoIewGd_qk2MEZMb0l3Qlo4ek0 ) . Good luck!
My phone suddenly had a momentary display malfunction (some of the text on the screen just turned into garbled pixels) and then entered into a boot loop. I didn't make any changes or updates to the phone recently. It no longer boots normally - just the Samsung logo and some of the Verizon logo animation, then it reboots and starts again. How do I pull my user data off (photos mainly) before trying a factory reset? The phone is totally stock. I haven't unlocked it, rooted it, or installed any custom recovery/ROM/bootloader/whatever. (I sound like I don't know what I'm talking about because I don't, haha.) The touchscreen is fully functional. I'm sure this has been covered here before, but I haven't found anything that totally explains how to do this in this particular situation, so I'd really appreciate any help anyone can provide.
The only time I can get the phone to show up under adb devices is when I boot it in recovery mode and select "Apply update from ADB". But it says "sideload" next to it in adb devices, and the push, pull, and shell commands return errors. I've read that this is normal. Wiping the cache partition didn't solve the boot loop problem.
If it helps, this is what the top of the recovery screen displays:
Android Recovery
Verizon/heroqltevzw/heroqltevzw
8.0.0/R16NW/G930VVRSBCTC1
user/release-keys
I'm no Android expert, clearly. I've heard it mentioned that I need to install a custom recovery in order for this to be possible. To be clear, I want to make sure I don't erase the user data before I have a chance to pull it off the phone. These are the questions that I still have after reading information elsewhere (some of which I'm just asking out of an abundance of caution):
Is it correct that I need to install a custom recovery before I can pull this data off the phone?
Do I need to have it unlocked/rooted/anything else in order to be able to install a custom recovery? Or is there anything else I should do before installing it?
Which custom recovery should I install?
Do I need a custom ROM, if that's a different thing?
Do I need a custom...bootloader, if that's also a different thing?
Should I use Odin or Samsung Smart Switch to install the custom recovery?
(Extra credit: Does it sound from my description of how the boot loop started that this phone has hardware problems and should be replaced ASAP?)
Thank you so much for any help you can provide! Any extra information beyond my questions will be very much appreciated, too, of course. You guys never cease to impress.
You have a B version bootloader like me, and so far no root/custom recovery has been made for our versions of bootloaders. If I were you, I would check if you had maybe like a previous backup, and if Google made an automatic backup of your apps and photos? If you didn't use a 3rd party backup, and if you don't want to wait, you might lose some files. I also think you might be able to flash a certain part of stock firmware to get your phone to boot again, but I'm not sure
Also, if you don't care about files that can't be get through automatic backups, might as well flash a whole stock firmware, which as far as I know, may be the easiest way to get out of one.
Please correct me if I'm wrong
Also to answer your bullet points:
1. I'm not sure if you need a custom recovery, but from my experience from a Verizon s5, that's probably a yes.
2. Since this is Verizon, you would need to unlock your bootloader in order to install a custom recovery, which in where I posted my first reply, the B version of the bootloader is still locked down without any known way to unlock it. You and me are stuck with this, as I also have the B version.
3. If the heavens line up and you somehow unlock the bootloader, try to flash a recovery Called TWRP under the name "Herolqte" (that's what I think). If that doesn't work, try to find one that works with the phone on XDA. If neither of those show up try to use another custom recovery like CWM.
4. If your trying to recover data on a phone, flashing a custom ROM is probably the last thing you want to do. A custom ROM is a modified version of Android, which may mean you'll have to format your device anyways so this is probably not what you want (even though it would be nice :[ )
5. As in post 2, all you would need to get a custom recovery is to unlock the bootloader. I'm not even sure if you CAN get a custom bootloader, as Odin won't even let me flash a stock bootloader to my phone that is the same exact Version >:[
6. You would need to use Odin if you were trying to flash something to your phone. Smart switch I think WOULD let you back up your device, but you would need to be on the home screen on your phone, which in turn, would probably need you to be out of that bootloop.
7. This is probably a software issue. If you don't care to much about the idea, try flashing some parts of a stock firmware. I was personally in a boot loop 2 days ago, but I flash a stock modem file (I think that was the second file slot from the bottom in Oden) and that got me out, but for some reason wiped my phone clean, and I'm not sure why.
Anyways. Goodluck in recovering your data. Also I'm not sure if a factory reset would even fix a boot loop
yaas
yaas
Hi All
Looking for a best tutorial to follow and the right one for my phone really don't want to brick it, obviously :/. as there seems to be a few versions for the S7
I have the following: S7 android 8.0.0 SM-G930F not sure what else I need to know! I'm in the UK so I assume UK phones come with Exynos cpu's
and as far as I am aware android 8 is Oreo! but when they say Stock Rom I assume they mean the same as what came with the phone the original rom?
if so is there an alternative stable rom without the crap included or is it just as simple to delete every thing you don't want now it's rooted! and does that mean if I reset the phone its back to normal with all the crap included! or is there a way to keep it rooted even after reset! and should anything be disabled I.e prepare the phone before attempting to root like any kind of auto encryption that needs disabling and just one more question
if at anytime the rooting process hangs for a ridiculous amount of time when should I throw in the towel! and what are the chances of retrieving the phone back to original state! or does a dirty shutdown brick it?.
I started the root process but failed at first hurdle!, followed instructions install Odin3_v3.13.1 but when I connected the phone nothing showed up in Odin? though I will have another go just to confirm I followed it correctly, I'll update this when it's done.
this was the tutorial I followed:
Easy 4 Newbie [Root Guide]SM-G930F, G935F, G930FD, G935FD (Samsung Galaxy S7 Edge)
Warning ! Please note that the official TWRP for Nougat on Galaxy S7/ S7 Edge is not available yet but based on my experience the Marshmallow version is working on Nougat. By installing a custom recovery on your S7 and S7 Edge and rooting it...
forum.xda-developers.com
I know alot of questions I would really appreciate any help and clarification on the above.
many thanks
Regards
Daz
Look pal, rooting the phone is just like being an adult, it means you will get rid of Samsung's "Child Care".
Yes, UK models use Exynos chip, but you have to be sure, look at your baseband version, if it is G930FXXX, then you are good.
ROMs are in two shapes:
Stock-based: These are just like the one you are using, or other Samsung phones does, like Samsung Experience, One UI, TouchWiz. Maybe MIUI and FlymeOS will come into account, as there are ROMs based on them + Samsung's.
AOSP: These are pure Android ROMs, with few modifications to the core, but keeping the UI as close to the source as possible, Google & OnePlus phones come with a near-to-pure operating systems.
Changing a ROM is not risky, as long as you follow the instructions, without any unaccounted improvising.
Before you install a ROM, read the working and bug list, to make sure you are installing something you have an idea of.
You need to install TWRP recovery (or any other one you like), and format data, in order to be able to travel among ROMs and/or root your device.
Formatting is only required because the phone is forcibly encrypted, and TWRP can not decrypt it, at least not for this device.
Rooting is simply about flashing a 5-MB file, Magisk, then rebooting to system, no need to wipe data.
No need to do any additional steps, unless you are trying to hide root from some apps and/or pass SafetyNet.
Mohamedkam000 said:
Look pal, rooting the phone is just like being an adult, it means you will get rid of Samsung's "Child Care".
Yes, UK models use Exynos chip, but you have to be sure, look at your baseband version, if it is G930FXXX, then you are good.
ROMs are in two shapes:
Stock-based: These are just like the one you are using, or other Samsung phones does, like Samsung Experience, One UI, TouchWiz. Maybe MIUI and FlymeOS will come into account, as there are ROMs based on them + Samsung's.
AOSP: These are pure Android ROMs, with few modifications to the core, but keeping the UI as close to the source as possible, Google & OnePlus phones come with a near-to-pure operating systems.
Changing a ROM is not risky, as long as you follow the instructions, without any unaccounted improvising.
Before you install a ROM, read the working and bug list, to make sure you are installing something you have an idea of.
You need to install TWRP recovery (or any other one you like), and format data, in order to be able to travel among ROMs and/or root your device.
Formatting is only required because the phone is forcibly encrypted, and TWRP can not decrypt it, at least not for this device.
Rooting is simply about flashing a 5-MB file, Magisk, then rebooting to system, no need to wipe data.
No need to do any additional steps, unless you are trying to hide root from some apps and/or pass SafetyNet.
Click to expand...
Click to collapse
Hi Mohamedkam000
Thanks for replying. I'm not confused about why I want to root the phone. I'm just trying to understand the inner workings and the risks as I'm not as clued up with phone OS's as I am windows. I don't care about warrantees or hiding the the fact it's rooted I just want a clean rooted phone free of big brother well inside at least I know you will never completely keep them out but making it hard is a start lol.
Thank you very much for all the above especially on clarifying about the roms and the reason TWRP formats due to encryption nice one
My Baseband version slightly different though it's G930FXXU8ETI3 not sure if having a U instead of a third X makes any difference!
and I posted wrong tutorial I'm actually following this one below again not sure if that matters.
Guide How to root Android 8.0 Oreo Stock ROM on Galaxy S7 ( 100% Working )
Hi . i see too many peoples have problem on rooting Android 8.0 Oreo Stock Rom on Galaxy S7 ( edge ) and they cant get passed from the verification field error ! ok its bcuz they do only 1 step wrong , here i just wanna tell you all the steps 1...
forum.xda-developers.com
Again many thanks for clarifying that lot up very informative and much appreciated.
Kind regards
Daz
CitizenSmith said:
Hi Mohamedkam000
Thanks for replying. I'm not confused about why I want to root the phone. I'm just trying to understand the inner workings and the risks as I'm not as clued up with phone OS's as I am windows. I don't care about warrantees or hiding the the fact it's rooted I just want a clean rooted phone free of big brother well inside at least I know you will never completely keep them out but making it hard is a start lol.
Thank you very much for all the above especially on clarifying about the roms and the reason TWRP formats due to encryption nice one
My Baseband version slightly different though it's G930FXXU8ETI3 not sure if having a U instead of a third X makes any difference!
and I posted wrong tutorial I'm actually following this one below again not sure if that matters.
Guide How to root Android 8.0 Oreo Stock ROM on Galaxy S7 ( 100% Working )
Hi . i see too many peoples have problem on rooting Android 8.0 Oreo Stock Rom on Galaxy S7 ( edge ) and they cant get passed from the verification field error ! ok its bcuz they do only 1 step wrong , here i just wanna tell you all the steps 1...
forum.xda-developers.com
Again many thanks for clarifying that lot up very informative and much appreciated.
Kind regards
Daz
Click to expand...
Click to collapse
It doesn't matter which version of Android you are using, root is the same.
However, on stock ROMs, it might sometimes get rough, as you may end up with Wi-Fi not working (happened to me Q1 2020).
If you really want to learn how Android OS works, then rooting the stock ROM is not your way.
Try AOSP ROMs, preferably start with Oreo ones, you can root in 3 common way, LineageOS SU Add-on, Magisk, Super SU.
But before you tickle your phone, you have to make a backup of your current device, of every partition, EFS is the most important partition, so make sure it is safe.
Baseband version doesn't matter a lot, unless you're paranoid with updates, it is sorted alphabetically, each string on its own.
The phone is more similar to a linux machine than to a Windows PC.
Edit: To root stock ROM, you have to flash dm verity, so you don't end up encrypted again.
Mohamedkam000 said:
It doesn't matter which version of Android you are using, root is the same.
However, on stock ROMs, it might sometimes get rough, as you may end up with Wi-Fi not working (happened to me Q1 2020).
If you really want to learn how Android OS works, then rooting the stock ROM is not your way.
Try AOSP ROMs, preferably start with Oreo ones, you can root in 3 common way, LineageOS SU Add-on, Magisk, Super SU.
But before you tickle your phone, you have to make a backup of your current device, of every partition, EFS is the most important partition, so make sure it is safe.
Baseband version doesn't matter a lot, unless you're paranoid with updates, it is sorted alphabetically, each string on its own.
The phone is more similar to a linux machine than to a Windows PC.
Edit: To root stock ROM, you have to flash dm verity, so you don't end up encrypted again.
Click to expand...
Click to collapse
Thanks again for clearing quite a few things up I thought rooting stock rom would have been far safer way forward wow how wrong was I! but I guess I am just trying to find any kind simile to windows in any way but as you pointed out again it's more like Linux which again I've only played around with ubuntu and mint for a short period so again not to up on Linux lol.
It's funny I was just reading up on AOSP ROMs then got your message. I see they have a stable but not complete! Android 10 not that I would consider it need as I need a stable OS so Oreo is fine for me.
I have backed up phone using Smart Switch on the PC I assume that copy's every thing that's needed, I reset the phone in anticipation all be it prematurely but at least it restored all my data so if anything that was a good test of the back up at least .
I will have look at some AOSP ROMs and see what's involved there, I'll check out their tutorial hopefully it will include the whole process including root.
I gather by your comment using a AOSP ROM you don't need to use dm-verity or will that still be needed!.
The first thing to do is to flash (install) TWRP, it's a custom recovery (think of it as a mini OS that can boot before Android), that will be the base for any of your future tinkering.
Here is the thread, read the FP carefully: [Recovery][Exynos] Official TWRP for Galaxy S7 (herolte)
Once TWRP installed, you can do many things:
Install addons like Magisk. Magisk is the tool you use to obtain root. Forget SuperSU, its outdated, and don't works in modern versions of Android.
Install a custom ROM (this subforum is the perfect place to find them).
Backup & restore an image of your current ROM (very useful).
mooms said:
The first thing to do is to flash (install) TWRP, it's a custom recovery (think of it as a mini OS that can boot before Android), that will be the base for any of your future tinkering.
Here is the thread, read the FP carefully: [Recovery][Exynos] Official TWRP for Galaxy S7 (herolte)
Once TWRP installed, you can do many things:
Install addons like Magisk. Magisk is the tool you use to obtain root. Forget SuperSU, its outdated, and don't works in modern versions of Android.
Install a custom ROM (this subforum is the perfect place to find them).
Backup & restore an image of your current ROM (very useful).
Click to expand...
Click to collapse
Thanks Mooms for the input
I tried to follow your links tutorial which he gives three options only one is any good to me and that was installing twrp using Odin but I'm having issues at every turn!. I can't even get Odin to recognise my phone it just wont pick it up I have Samsung driver installed and I have reinstalled many times I found an article claim to have a workaround but that was BS just selling some other app I even change the driver as described on there page,
7 Tips to Fix Odin Not Detecting Phone
Are you using Odin flash tool to flash your Samsung phone but it is not recognized by Odin? Here are 7 tips to fix Odin not detecting phone.
www.imyfone.com
.
but that did nothing so reinstall normal driver again.
feels like it's just not meant to be :/
Thanks again.
CitizenSmith said:
Thanks again for clearing quite a few things up I thought rooting stock rom would have been far safer way forward wow how wrong was I! but I guess I am just trying to find any kind simile to windows in any way but as you pointed out again it's more like Linux which again I've only played around with ubuntu and mint for a short period so again not to up on Linux lol.
It's funny I was just reading up on AOSP ROMs then got your message. I see they have a stable but not complete! Android 10 not that I would consider it need as I need a stable OS so Oreo is fine for me.
I have backed up phone using Smart Switch on the PC I assume that copy's every thing that's needed, I reset the phone in anticipation all be it prematurely but at least it restored all my data so if anything that was a good test of the back up at least .
I will have look at some AOSP ROMs and see what's involved there, I'll check out their tutorial hopefully it will include the whole process including root.
I gather by your comment using a AOSP ROM you don't need to use dm-verity or will that still be needed!.
Click to expand...
Click to collapse
AOSP ROMs are pure, you can't say they are not complete. They are complete, and what OEMs do, like Samsung and Xiaomi is just a customization that you can do, too.
It is preferred that when you take a backup, take it with TWRP, just to ensure you backed up phone's partitions, along with "EFS".
The root procedure on Android 6+ is done by patching the Kernel (boot.img), so unless you take backup of that, you cannot keep root.
There are stable custom ROMs, custom ROMs are meant for custom adjustments, however the stability depends on your phone, and the way you use it, you can compare AOSP vs. Stock and see the difference.
AOSP ROMs doesn't need dm verity, well, at least not if the developer did not mention the encryption part.
Mohamedkam000 said:
AOSP ROMs are pure, you can't say they are not complete. They are complete, and what OEMs do, like Samsung and Xiaomi is just a customization that you can do, too.
It is preferred that when you take a backup, take it with TWRP, just to ensure you backed up phone's partitions, along with "EFS".
The root procedure on Android 6+ is done by patching the Kernel (boot.img), so unless you take backup of that, you cannot keep root.
There are stable custom ROMs, custom ROMs are meant for custom adjustments, however the stability depends on your phone, and the way you use it, you can compare AOSP vs. Stock and see the difference.
AOSP ROMs doesn't need dm verity, well, at least not if the developer did not mention the encryption part.
Click to expand...
Click to collapse
Some of the roms I have looked at mention external touch buttons at bottom of phone do not work or something else in the phone I'm just reading their comments.
I understand about the stock & custom rom's now that's not my problem at least not at the moment as I am miles away from choosing a rom! as I can't even get out the starting gate!. I can not get TWRP on my phone as the only way I can see to get it on a unrooted! phone is to use Odin but as I said Odin doesn't work at least not for me it does not see my phone. I would love to take a back up using twrp but that won't happen until I find a way to get TWRP on a unrooted phone. what crazy paradox is this!. you can't root phone without twrp installed and twrp won't install on a unrooted phone!. that makes perfect sense.
CitizenSmith said:
Some of the roms I have looked at mention external touch buttons at bottom of phone do not work or something else in the phone I'm just reading their comments.
I understand about the stock & custom rom's now that's not my problem at least not at the moment as I am miles away from choosing a rom! as I can't even get out the starting gate!. I can not get TWRP on my phone as the only way I can see to get it on a unrooted! phone is to use Odin but as I said Odin doesn't work at least not for me it does not see my phone. I would love to take a back up using twrp but that won't happen until I find a way to get TWRP on a unrooted phone. what crazy paradox is this!. you can't root phone without twrp installed and twrp won't install on a unrooted phone!. that makes perfect sense.
Click to expand...
Click to collapse
Does your phone allow MTP communication? I mean can you transfer files when the phone is turned on?
Does the phone show any notification about a usb connection?
If not, then you have probably a bad USB cable, at least, or you have a hardware issue that can go as deep as a burned charging port.
If yes, then either your USB cable is not as fast as the phone requires, or you haven't installed the Samsung USB Drivers on your PC.
Unfortunately, you cannot root your device without PC, at least not since Lollipop.
CitizenSmith said:
Thanks Mooms for the input
I tried to follow your links tutorial which he gives three options only one is any good to me and that was installing twrp using Odin but I'm having issues at every turn!. I can't even get Odin to recognise my phone it just wont pick it up I have Samsung driver installed and I have reinstalled many times I found an article claim to have a workaround but that was BS just selling some other app I even change the driver as described on there page,
7 Tips to Fix Odin Not Detecting Phone
Are you using Odin flash tool to flash your Samsung phone but it is not recognized by Odin? Here are 7 tips to fix Odin not detecting phone.
www.imyfone.com
.
but that did nothing so reinstall normal driver again.
feels like it's just not meant to be :/
Thanks again.
Click to expand...
Click to collapse
Which version of Odin are you using ?
Use this version (latest): Odin v3.14.4
Which version of the Samsung USB drivers are you using ?
Use this version (latest): https://developer.samsung.com/mobile/android-usb-driver.html
Mohamedkam000 said:
Does your phone allow MTP communication? I mean can you transfer files when the phone is turned on?
Does the phone show any notification about a usb connection?
If not, then you have probably a bad USB cable, at least, or you have a hardware issue that can go as deep as a burned charging port.
If yes, then either your USB cable is not as fast as the phone requires, or you haven't installed the Samsung USB Drivers on your PC.
Unfortunately, you cannot root your device without PC, at least not since Lollipop.
Click to expand...
Click to collapse
Hi
Yes I can transfer files.
Yes phone asks to allow or block file transfer and it ohone shows up in Devices and Drives list and I can access the phone directory and shows up as Samsung s7 icon.
I will try another USB lead but the one I'm using is new and wasn't cheap but still a possibility I have had leads that weren't suitable for other things I was trying so it is worth a try.
Thanks
mooms said:
Which version of Odin are you using ?
Use this version (latest): Odin v3.14.4
Which version of the Samsung USB drivers are you using ?
Use this version (latest): https://developer.samsung.com/mobile/android-usb-driver.html
Click to expand...
Click to collapse
When I downloaded Odin this was latest one Odin3_v3.13.1 though I have doubts that one version update will fix this issue as I did not see many if any people having my issue so they all used Odin and I believe theirs are fine even with older versions! but as I said Mohamedkam it's worth a try I will down load that version and give it a try.
As for the Samsung usb driver I believe that is where I got mine
SAMSUNG_USB_Driver_for_Mobile_Phones no version visible under properties on file version 1.7.23.0.
The USB connection seems to be fine I have uninstalled then re-download and reinstalled a couple of times.
I can transfer files no problem it shows up as Galaxy S7 Icon with card and phone drive inside.
I'll update shortly thank you.
Update:
I just went to try new Odin and whilst checking my phone have seen I have Offical TWRP app installed? I have no clue as to how that's got in there! as Odin did not show phone so I could select nothing!.
In the phone I open app and if i select backup existing recovery it opens and Select Folder tab and under that Selected Folder: /sdcard Filename: Recovery .img and at the bottom of screen Root access required.
I just hope it's installed correctly!. it is showing in playstore my apps as well just to confirm. if this is now installed what should I do next Now not sure what tutorial to start following.
I am just going to try the new odin and see if it picks up the phone back soon.
OK Seem that it now shows up in the new Odin. at least I think it has! in the log window I see this: <ID:0/004> Added!!
I didn't see that before.
Would be grateful if you could tell me how to proceed from here!
Correct, you don't need he latst version of Odin or the Samsung drivers, bit it was just to be sure.
You need to be in download mode, but before, you must have checked OEM unlock & USB debug in developer options (mandatory).
I've written a tutorial with images here (in French):
Samsung Galaxy S7 (edge) - Mangez un Oreo! [Topic Unique] - Page : 487 - Téléphone Android - Technologies Mobiles - FORUM HardWare.fr
mooms said:
Correct, you don't need he latst version of Odin or the Samsung drivers, bit it was just to be sure.
You need to be in download mode, but before, you must have checked OEM unlock & USB debug in developer options (mandatory).
I've written a tutorial with images here (in French):
Samsung Galaxy S7 (edge) - Mangez un Oreo! [Topic Unique] - Page : 487 - Téléphone Android - Technologies Mobiles - FORUM HardWare.fr
Click to expand...
Click to collapse
As I said the older version did not show any kind of data what's so ever and the phone was in download mode. phone displayed "Downloading" which I believe it says that even if it's not doing anything! so a tutorial explained. I think it must have installed the Official TWRP app even though phone did not show up in Odin everything was blank however when I installed the new version of Odin like you suggested it then showed up as <ID:0/004> Added!!. so your suggestion work thanks for that and I did enable OEM unlock & USB debug I did long time ago.
I would check out your tutorial but unfortunately I don't speak French and translating instructions is too risky but thank you for the offer but I'll carry on look around still undecided on what custom rom to go for as I said some comments point out small issues and the developers also state certain things are not working so that is making it hard to consider one if you know what I mean.
Again Thank you for your input very much appreciated.
CitizenSmith said:
As I said the older version did not show any kind of data what's so ever and the phone was in download mode. phone displayed "Downloading" which I believe it says that even if it's not doing anything! so a tutorial explained. I think it must have installed the Official TWRP app even though phone did not show up in Odin everything was blank however when I installed the new version of Odin like you suggested it then showed up as <ID:0/004> Added!!. so your suggestion work thanks for that and I did enable OEM unlock & USB debug I did long time ago.
I would check out your tutorial but unfortunately I don't speak French and translating instructions is too risky but thank you for the offer but I'll carry on look around still undecided on what custom rom to go for as I said some comments point out small issues and the developers also state certain things are not working so that is making it hard to consider one if you know what I mean.
Again Thank you for your input very much appreciated.
Click to expand...
Click to collapse
Take a note that, when you flash TWRP, you have to boot immediately to the recovery, so as to enforce its existence, cause I remember they phone has an original recovery backed up somewhere, and gets triggered when you reboot directly to system instead of the unofficial binary.
I advise you to watch guides on YouTube, it's more .. understandable.
CitizenSmith said:
still undecided on what custom rom to go for as I said some comments point out small issues and the developers also state certain things are not working so that is making it hard to consider one if you know what I mean.
Again Thank you for your input very much appreciated.
Click to expand...
Click to collapse
I recommend to go with ALEXNDR ROM: zero bugs, everything works perfectly (it's based on stock ROM).
[ROM][G930F/FD][ALEXNDR] * U8EUE1 * DevBase v7.4 * Encryption support [Jul-10]
Important notes for Developers / Chefs !!! This ROM is NOT based on any other custom ROM. My work contains many original ideas and innovations that I introduced as the first in the ROM development (see "Changelist" in post #2). Of course, it...
forum.xda-developers.com
Mohamedkam000 said:
Take a note that, when you flash TWRP, you have to boot immediately to the recovery, so as to enforce its existence, cause I remember they phone has an original recovery backed up somewhere, and gets triggered when you reboot directly to system instead of the unofficial binary.
I advise you to watch guides on YouTube, it's more .. understandable.
Click to expand...
Click to collapse
Yer I read that but I've ended up with TWRP installed and did not do that process because I was unaware it installed until it showed up.
As I said I'll just keep looking for now I know I'll find one that works for me from start to finish.
and I've been checking youtube but wouldn't want to use any links their providing but it may help familurise myself with the whole process if i watch enough of them.
Thanks again for your help.
mooms said:
I recommend to go with ALEXNDR ROM: zero bugs, everything works perfectly (it's based on stock ROM).
[ROM][G930F/FD][ALEXNDR] * U8EUE1 * DevBase v7.4 * Encryption support [Jul-10]
Important notes for Developers / Chefs !!! This ROM is NOT based on any other custom ROM. My work contains many original ideas and innovations that I introduced as the first in the ROM development (see "Changelist" in post #2). Of course, it...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi Mooms
I will check that out many thanks. I wonder if you could help me here. I am in the middle of the rooting process but have hit a snag. again!
I have now installed TWRP successfully then no-verity-opt-encrypt-3.1 all went fine and I'm at point of flashing Magisk but have an issue when I swipe to flash is gives me a error in red saying "invalid zip file format !"
I downloaded it from github here.
GitHub - topjohnwu/Magisk: The Magic Mask for Android
The Magic Mask for Android. Contribute to topjohnwu/Magisk development by creating an account on GitHub.
github.com
I click on "code" tab and then "download zip" and I placed that in a download folder on my sd card when I select it I get the above error any ideas as to why I am getting this am I downloaded the correct file?
thanks for any assistance you could give.