Related
I may be doing something stupid, but I've tried various options...
I had an original 5.1.1 build that I let OTA to 6.0. Everything was working fine. I wanted to root, so I installed TWRP... and then the machine wouldn't reboot; it stuck at the "powered by Android" screen and never went into the standard animation screens. I could reboot into TWRP recovery easily enough and using that I could see the filesystem data, but the OS wouldn't boot.
So I reflashed back to 5.1.1 (using http://www.andromods.com/download-files/xt1575-stock-firmware-moto-x-2015-pure-edition.html ), let that OTA to 6.0, installed TWRP... same result.
Third attempt; started at 5.1.1 then installed TWRP (which worked) and then did OTA to 6.0... but this went into a reboot loop.
(Of course during all this I've lost my configs, but I can rebuild that)
Has anyone been able to install TWRP onto an X-Pure 2015 that's running 6.0 ?
What TWRP version are you installing? Make sure it's 2.8.7.1 https://dl.twrp.me/clark/
Sent from my XT1575 using Tapatalk
Sorry, yes, I should have mentioned that; twrp-2.8.7.1-clark.img
Did you install TWRP as read only? I did this and now system recovery is overwriting TWRP and I have no idea how to get out of it.
I had the same problem a couple days ago and posted about it in the 'Android 6.0 Update rolling out! Pure Edition' thread:
"I keep running into a problem after doing the MM update when I flash TWRP (either 2.8.7.0 or 2.8.7.1) where it won't boot into system, just sits there where the animation part should start. Booted/rebooted fine a few times after finishing the MM update, even after flashing the unlocked bootloader logo fix, but as soon as I flash recovery it won't boot system. "
Tried it several times with both TWRP 2.8.7.0 and 2.8.7.1 with no success. Also tried sideloading the OTA per the manual steps in this thread but still couldn't boot to system. Only by already having TWRP installed on 5.1.1 am I able to flash a custom 6.0 ROM successfully. Haven't seen a really clear statement yet that someone has flashed TWRP on fully stock MM with no problem..
EVR_PR said:
Did you install TWRP as read only? I did this and now system recovery is overwriting TWRP and I have no idea how to get out of it.
Click to expand...
Click to collapse
First time I let /system be read-write and second time I let /system be RO. However this likely isn't related to recovery overwriting TWRP; it's documented that on first boot the OS may rewrite the recovery data meaning you'd need to install TWRP again.
Dahenjo said:
I had the same problem a couple days ago and posted about it in the 'Android 6.0 Update rolling out! Pure Edition' thread
...
Haven't seen a really clear statement yet that someone has flashed TWRP on fully stock MM with no problem..
Click to expand...
Click to collapse
Thanks; at least I know it's not me being stupid then (or if I am, then I'm not alone ).
sweh said:
First time I let /system be read-write and second time I let /system be RO. However this likely isn't related to recovery overwriting TWRP; it's documented that on first boot the OS may rewrite the recovery data meaning you'd need to install TWRP again.
Click to expand...
Click to collapse
I have flashed TWRP twice and even rebooted to recovery from recovery and system recovery still overwrites TWRP after booting to system.
Only way I can access TWRP is either flashing it or booting into from the fastboot folder using the fastboot boot command.
Doesn't matter what I do, the option for changing TWRP from read-write to read only doesn't show up anymore.
sweh said:
Thanks; at least I know it's not me being stupid then (or if I am, then I'm not alone ).
Click to expand...
Click to collapse
Well, at age 65 I do put my socks on backwards sometimes..... :silly:
Read on a fairly-detailed post that using adb to flash recovery and rebooting into it should actually work fine!
Could anyone confirm? Is it even possible?
P.S. I'm on XT1572 Indian stock 6.0, and very eager for twrp
I had the exact same problem. I used adb. Stuck on loading screen and then suddenly black. Not able to boot the phone. I'd like to make a nandroid and after that I'd like to use systemless root. If I'm correct, I'll still receive ota's while using systemless root.
Same for me. Returned to stock EU 5.1.1, got update, installed it. Later unlocked bootloader and installed latest TWRP. And now I am stuck on booting up image.
So stock Marshmallow cant be used with TWRP?
BooBzi said:
Same for me. Returned to stock EU 5.1.1, got update, installed it. Later unlocked bootloader and installed latest TWRP. And now I am stuck on booting up image.
So stock Marshmallow cant be used with TWRP?
Click to expand...
Click to collapse
That seems to be the case since I have yet to hear of anyone freshly setting up TWRP for clark/MXPE on purely stock MM without it failing to boot to system afterwards. If you already have TWRP on 5.1.1 you can install a custom MM ROM and then TWRP works normally (ie boots to system), but so far that's the only way I'm aware of to get it functional on MM.
I see you started another thread on this, which may help it get noticed, but maybe also post in the TWRP thread. I posted there on this issue over a week ago but have had zero response from OP, but if others keep doing so maybe that will help.
IMVHO, TWRP for MXPE isn't being supported well - this problem, the version being incorrect for several weeks causing confusion w/dozens of unnecessary posts (this alone could likely be fixed in 2 minutes), as well as the 'SD as internal storage' issue(s) which may be more involved but are still the type of thing those maintaining it are supposed to address. Even some acknowledgement that the issues are recognized and being worked on would be nice, but thus far not even that.
Dahenjo said:
That seems to be the case since I have yet to hear of anyone freshly setting up TWRP for clark/MXPE on purely stock MM without it failing to boot to system afterwards. If you already have TWRP on 5.1.1 you can install a custom MM ROM and then TWRP works normally (ie boots to system), but so far that's the only way I'm aware of to get it functional on MM.
I see you started another thread on this, which may help it get noticed, but maybe also post in the TWRP thread. I posted there on this issue over a week ago but have had zero response from OP, but if others keep doing so maybe that will help.
IMVHO, TWRP for MXPE isn't being supported well - this problem, the version being incorrect for several weeks causing confusion w/dozens of unnecessary posts (this alone could likely be fixed in 2 minutes), as well as the 'SD as internal storage' issue(s) which may be more involved but are still the type of thing those maintaining it are supposed to address. Even some acknowledgement that the issues are recognized and being worked on would be nice, but thus far not even that.
Click to expand...
Click to collapse
Thanks for reply, I did listen to you and post on TWRP thread.
Dahenjo said:
That seems to be the case since I have yet to hear of anyone freshly setting up TWRP for clark/MXPE on purely stock MM without it failing to boot to system afterwards. If you already have TWRP on 5.1.1 you can install a custom MM ROM and then TWRP works normally (ie boots to system), but so far that's the only way I'm aware of to get it functional on MM.
I see you started another thread on this, which may help it get noticed, but maybe also post in the TWRP thread. I posted there on this issue over a week ago but have had zero response from OP, but if others keep doing so maybe that will help.
IMVHO, TWRP for MXPE isn't being supported well - this problem, the version being incorrect for several weeks causing confusion w/dozens of unnecessary posts (this alone could likely be fixed in 2 minutes), as well as the 'SD as internal storage' issue(s) which may be more involved but are still the type of thing those maintaining it are supposed to address. Even some acknowledgement that the issues are recognized and being worked on would be nice, but thus far not even that.
Click to expand...
Click to collapse
I was on pure stock mm and sideloaded twrp without any issues. I use the twrp app (requires root) to reboot into recovery without any problems.
ccic2491 said:
I was on pure stock mm and sideloaded twrp without any issues. I use the twrp app (requires root) to reboot into recovery without any problems.
Click to expand...
Click to collapse
Hello, is it possible to get step by step tutorial?
Later will try on Style with stock MM.
Thanks!
ccic2491 said:
I was on pure stock mm and sideloaded twrp without any issues. I use the twrp app (requires root) to reboot into recovery without any problems.
Click to expand...
Click to collapse
Did you not use the Fastboot Install Method on the TWRP site? We are unable to reboot back into system after using this on stock MM, which always worked fine on stock LP. If you used a different method that worked could you please share what that was?
I am using twrp 2.8.7.1 on my Moto X Style XT1572 Asia retail without any trouble for past two weeks.
I normally flashed it using the fastboot and never ran into trouble.
gulshanstrider said:
I am using twrp 2.8.7.1 on my Moto X Style XT1572 Asia retail without any trouble for past two weeks.
I normally flashed it using the fastboot and never ran into trouble.
Click to expand...
Click to collapse
Just to confirm - when you flashed TWRP you were completely stock after installing the 6.0 OTA (not still on 5.1.1 before taking the OTA), correct?
Dahenjo said:
Just to confirm - when you flashed TWRP you were completely stock after installing the 6.0 OTA (not still on 5.1.1 before taking the OTA), correct?
Click to expand...
Click to collapse
Here is what I did:-
1) I was in Stock 5.1.1 (had unlocked bootloader)
2) I took the OTA.
3) Flashed the twrp 2.8.7.1 using fastboot
So yes I was completely stock 6.0 when I flashed the TWRP for MM
Hi M3 users,
I'm a long time lurker and reader on XDA. Now it's time to give something back or at least participate
Following my recent M3 purchase a dugg a bit deeper into this topic and tried to get us the stock recovery for our devices.
I'm not really a dev. I just used the information I found here and in the russian forum where greatslon (thank you guy) is posting his work.
If you find an error in the process please let me know. The files have not been tested in any way. I have no idea if this would even work (encryption and so on).
So I managed to extract the recovery.img file from the chinese rom. This method will also work for the LTE variant.
Maybe @greatslon or @somboons can share their view on the topic or maybe @somboons can even use it in his tool.
Resources
http://4pda.ru/forum/index.php?showtopic=780572&st=120
http://forum.xda-developers.com/showthread.php?t=2433454
http://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
https://play.google.com/store/apps/details?id=com.teammt.gmanrainy.huaweifirmwarefinder
Tools used
Huawei Firmware Finder (Team MT)
Huawei Update Extractor
Download
M3_BTV-W09C233B019_recovery.zip
Process
1. Start firmware finder (did use the android version)
2. Change device to BTV-W09C233
3. Downloaded the firmware B019 for BTV-W09C233 (no firmware for other variants present ATM)
4. Extracted and copied update.app to SD card
5. copy to PC
6. Extract recovery.img and recovery2.img using Huawei Update Extractor
Best regards,
Benjamin
Don't quite understand what's this for. First of all, recovery should be the same version as your ROM. I don't know if their mismatch will immediately lead to some malfunction, but some people on 4pda said they should match. Second - stock recovery's functions are limited to factory reset (wiping data, cache, etc.) and installing OTA updates. Without changing OEMINFO (and it's still unconfirmed), you won't be able to install any OTA except those, intented for your model and region, so again there's no need to install a higher version of recovery than your ROM is. But anyway, thank you for the extraction instruction.
P.S. I think there's no need to flash both recovery and recovery2. Recovery2 can be successfully replaced with TWRP and this combination is really great, cause you can launch TWRP by holding Volume Up button only.
And the only reason why you should keep recovery original is that it doesn't really wipe /data - it also creates some files there like custom.bin, containing your regional settings.
Hi Slavon,
Thanks for your highly appreciated comment. @somboons was looking for a stock recovery so I thought this might help.
Your given information are really helpful. I did not know that you could flash TWRP in recovery2 and replace erecovery Handy information.
I'm pretty new to the Huawei structure so always glad to learn something.
EDIT
A lot of good information can be found here: http://forum.xda-developers.com/honor-7/general/dual-recovery-honor-7-t3308398
Thank you very much,
sselpeelsxx
Giving Back
Benjamin,
I've also been a long time XDA lurker. Most of the devices I have owned were mainstream and thus already had a very active XDA developer community; Even if root had yet to be achieved, there would be hundreds of messages on the topic.
It seems the Mediapad M3 is just getting started. I am a developer of over 20 years, but very little android experience. However, I have recently spent a considerable amount of time (about 50-100 hours) working with the low level ADB protocol source code. And I have rooted and flashed no less than 50 devices, everything from cell phones to Android TV devices to routers.
I'm going to take this device on as my first real dev effort in this arena.
I have a few goals:
1. Get working backups for people that soft-brick or need to revert (including myself).
2. Recompile TWRP for the M3 to confirm greatslon's work, and better understand the process.
3. Release a stock rom that's pre-rooted and cleaned up (not that there was a lot of bloat on my device).
4. Release a custom rom that's not MIUI (perhaps based of CyanogenMod).
Since I have virtually no experience, I am sure these goals are quite lofty and will take some time. But hey, you got to have a plan, and I don't have anything else to work on right now.
Let me know if you want to work on anything together, or if you need any help with anything development related.
- 0D0A
Hey hey 0D0A,
I totally agree with you regarding the backups, I think once the first OTA update is pushed for the EU and US devices we have a good and safe way to go back.
Especially the US owners are struggling with greatslons TWRP version, that's the first thing we should tackle after the backup topic is cleared
I will contact you regarding possible work
Best regards,
Benjamin
can flash twrp via fastboot but get error saying and no recovery
hi, first thanks greatslon for doing the work on m3.
i seem to have succeeded in getting stuck and can't get it to boot into your custom twrp. adb on linux was working fine, but no longer. ditto for fastboot just get "waiting for devices" now. i switched to win10 and installed the hisuite app so i can use fastboot but still no adb. so i have tried to flash recovery and recovery2 but when i try to boot recovery i get error "Func NO: 11 (recovery image) ERROR NO: 2 (load failed)."
i then downloaded your custom rom and tried to flash the boot for that still no luck. i can't use adb so i am not sure how to just flash the custom rom with fastboot without being able to get into any recovery.
i did have this all rooted and working with your twrp but kept having issues with dpi and there was an ota update (b003) which wouldn't apply. so i tried to restore backup and it wen't south from there. basically now can't do much other than see the unlock "can't be trusted" page and bootloader.
any suggestions?
Desperately need stock recovery img, not sure exactly what when wrong, but it is stuck in a horrible boot loop. Tried Benjamin's recovery files and they seem to remove twrp and put it somewhat back to normal, but can only access the emui recovery and that fails to load the files. Put twrp back and tried greatslon's ROMs, they load but goes back to boot loop. Wipe and format everything, install my original backup through twrp recovery, it says it works, but again, back to boot loop... at this point I think I'm dead... any ideas, any word on the official recovery img? anything? Help!!
What device do you have? And what version were you on?
sselpeelsxx said:
What device do you have? And what version were you on?
Click to expand...
Click to collapse
I have the M3, BTV-W09, not sure what version, MM6.0 EMUI 4.1
Anyone have any other ideas on horrendous boot loop?
sselpeelsxx said:
Hey hey 0D0A,
I totally agree with you regarding the backups, I think once the first OTA update is pushed for the EU and US devices we have a good and safe way to go back.
Especially the US owners are struggling with greatslons TWRP version, that's the first thing we should tackle after the backup topic is cleared
I will contact you regarding possible work
Best regards,
Benjamin
Click to expand...
Click to collapse
Hello, I am unlocked, TWRPed, and rooted, but am trying to reverse all of that. My build number is BTV-W09C128B002. Is it safe to download the stock recovery from the OP for my device? Or do I really need the C128 version?
Hello and sorry for the late response, you would need the matching version for your C128 device.
I may be able to extract recovery from an update, I have to look into this tomorrow.
Regards
sselpeelsxx said:
Hello and sorry for the late response, you would need the matching version for your C128 device.
I may be able to extract recovery from an update, I have to look into this tomorrow.
Regards
Click to expand...
Click to collapse
Thanks! I have been able to use the Huawei Extractor to extract a recovery.img from OTA updates, but have been afraid to try flashing it. It has been recommended to hold off on trying that since that recovery.img is from an OTA and not a FULL update. Any thoughts?
Hey guys, first of all sorry about my english, im french.
So my problem is: I tried rooting my Axon 7 A2017U many times, with different guides. I always end up with a softbricked phone, having to restore to stock using MiFlash.
My bootloader is unlocked, i have stock recovery and stock rom for now.
Whenever i flash TWRP, either the signed one (from @tenfar) or unsigned (and up to date) ones, i can't go past the menu saying something like "your phone cant be checked for corruption, please lock your phone [...]" it just freeze. i did read somewhere that i should flash chainfire's root or a special .zip that, i guess, disabled some check that could prevent booting a phone with unsigned stuff/edited system (after flashing TWRP, so it could boot) that didn't work out. i think i found that information in some LineageOS thread here on XDA.
My ultimate goal would be to get a rooted stock nougat 7.1.1, up to date TWRP recovery and to be able to switch to LineageOS to try it out soon.
For what it is worth, i rooted many phones over the years, so while i'm no expert, i should be able to follow most of the steps you give me.
Thanks alot!
What version of TWRP did you flash first?
I have the same root problem i can not install in twrp install in twrp ok but su application displays no root cause i have latest twrp
KwesiJnr said:
What version of TWRP did you flash first?
Click to expand...
Click to collapse
this
https://forum.xda-developers.com/axon-7/development/recovery-official-twrp-zte-axon-7-t3515715
And @tenfar's signed one
KwesiJnr said:
What version of TWRP did you flash first?
Click to expand...
Click to collapse
this
https://forum.xda-developers.com/axon-7/development/recovery-official-twrp-zte-axon-7-t3515715
And @tenfar's signed one
Okay. Download and flash this one alone via fastboot and see what happens. This is one the I personally use. It is required for any of the newer versions to work properly.
twrp-3.0.2-2-a2017u.img
You can choose to rename it to just recovery.img, then:
1. fastboot flash recovery recovery.img
or
2.
if you choose to work with the same filename:
fastboot flash recovery twrp-3.0.2-2-a2017u.img
Select reboot to recovery from the bootloader menu now and try again.
Either way, should work fine. I know you mentioned you knew the basics, but just want to be sure.
Also forgot to mention. If TWRP works but you still can't get your phone to boot, you need to follow this guide here
You can start from the part that says:
-----------------------------------------------------
UPDATING FROM B20_Boot / B20 / B27 / B29 / B15(N)
-----------------------------------------------------
Again, that's the ROM I personally use if I want to go back to stock, not the one from the ZTE site.
Gonna try it and give feedback. thanks for taking time to help!
edit: im downloading the rom from the link you shared.
like you said, i can get TWRP to boot but not the phone.
So if i use full stock from ZTE, it can't boot with modified recovery?
edit 2: i don't know what worked, i think it might be the bootstack. or the rom by DrakenFX. now i can boot to the rom with a TWRP recovery installed. It worked, but i soft bricked again trying to flash SuperSU. So now i'm retrying with an updated TWRP.
I haven't tried that yet, but I really suspect that's the reason you're having problems. I rarely use pure stock ROMs. Like you, I'm not an expert in Android Development so I can't tell you why. Just been a flashaholic for years so made a few observations.
Which supersu are you installing? If you're swiping to the right in twrp, you need to install the dm-verity zip or supersu 2.79. There's some issues with newer builds.
Everything is working like a charm! Now im going to finally give lineageOS a try
I used Chainfire's SuperSU 2.79 stable.
Edit : Everything is working flawlessly! I'm running the lastest LineageOS nightly with root (Chainfire's 2.79). Followed their instruction and installation was smooth as butter. I should also point out i flashed the lastest official TWRP which seems more stable than the one @KwesiJnr suggested. The one he suggested was giving me some "can't read X partition" in red text everywhere in the log section, which the official one doesn't do. It was doing his job properly anyway though.
I can't thank @KwesiJnr enough, it helped me find the single mistake i was making.
lololo2 said:
Everything is working like a charm! Now im going to finally give lineageOS a try
I used Chainfire's SuperSU 2.79 stable
Click to expand...
Click to collapse
Glad you're up and running root. :good:
lololo2 said:
Everything is working like a charm! Now im going to finally give lineageOS a try
I used Chainfire's SuperSU 2.79 stable.
Edit : Everything is working flawlessly! I'm running the lastest LineageOS nightly with root (Chainfire's 2.79). Followed their instruction and installation was smooth as butter. I should also point out i flashed the lastest official TWRP which seems more stable than the one @KwesiJnr suggested. The one he suggested was giving me some "can't read X partition" in red text everywhere in the log section, which the official one doesn't do. It was doing his job properly anyway though.
I can't thank @KwesiJnr enough, it helped me find the single mistake i was making.
Click to expand...
Click to collapse
Yeah, like I mentioned before that was the base TWRP you needed to flash first, before any of the newer ones. You weren't intended to use it indefinitely.
There's a lot of Dev love for our device now and support is growing ... exciting new ROMs cropping up. Don't hesitate to try them out.
Hi guys,
I got the ASUS Zenfone 3 Zoom and started playing with it. Unfortunately I managed to soft brick it and somehow I can't go back to stock. Here are all the things I did. I would be happy to get any ideas what to try next:
1. unlocked the bootloader - using asus's official unlock tool
2. flashed twrp recovery - twrp-3.2.1-0-Z01H-20180304.img, using:
adb reboot bootloader
fastboot flash recovery twrp.img
3. updated asus's firmware to the latest official one:
copying UL-Z01H-WW-71.60.139.30.zip onto internal memory
android detects the update and applying it using android
4. Enabling lock pattern at boot (from android settings). Correct pattern required even when booting into recovery
5. Installing supersu via twrp:
adb reboot recovery
installing supersu
wiping caches (the cache partition cannot be wiped)
6. SuperSu working (tested via android)
7. Reading about Magisk. Trying to install magisk via twrp. Magisk's installer complained that the system is not vanilla (due to SuperSu modifications). Have to uninstall SuperSu to return to previous state.
8. Tried uninstalling SuperSu from the program itself (in android). The uninstaller got stuck. The phone become unresponsive and had to reboot.
9. Found a script packaged as an executable zip (to be installed via twrp) that will uninstall SuperSu and return system to pristine state (SuperSu makes a backup of the files it changes before installation) - UPDATE-unSU-signed.zip. Uninstallation worked.
10. Magisk installation still complained about the bootloader. Then things started to go wrong. I unpacked the latest firware UL-Z01H-WW-71.60.139.30.zip, took out boot.img and tried to flash just the bootloader
fastboot flash boot boot.img
11. Upon reboot the phone got stuck at the ASUS logo. Reboot into recovery and into fastboot still works (soft brick). Still shows unlock pattern at boot.
12. I tried flashing the original firmware using TWRP (install a zip). However the installation threw some errors. Unsuccessful.
13. I've tried flashing the system.img from the original firware using fastboot but still it's stuck at the ASUS logo at boot.
fastboot flash system system.img
Here I am stuck. I've read that TWRP cannot install properly the ASUS official firmware but if you flash the original recovery, it can probably flash it properly. Another thing that I think might explain why I cannot get out of the soft brick is that I've enabled the lock pattern at boot, which effectively encrypted some parts of the phone and I have a strong feeling this interferes with the boot process. I will look for a script/installable zip (via twrp) that can remove the lock.
I really need ideas/suggestions before I make something that will turn my phone into a hard brick. Thanks.
What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you
Thanks
+)KEV1N(+ said:
What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you
Click to expand...
Click to collapse
Thanks,
I tried to find a stock recovery images but unsuccessful. Can you tell me where to get it from?
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
-- [link] removed due to XDA regulations
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.
mollonado said:
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.
Click to expand...
Click to collapse
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
It came preloaded with Nougat? Interesting.
+)KEV1N(+ said:
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
It came preloaded with Nougat? Interesting.
Click to expand...
Click to collapse
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?
mollonado said:
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?
Click to expand...
Click to collapse
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.
+)KEV1N(+ said:
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.
Click to expand...
Click to collapse
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.
mollonado said:
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.
Click to expand...
Click to collapse
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?
mollonado said:
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?
Click to expand...
Click to collapse
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.
+)KEV1N(+ said:
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.
Click to expand...
Click to collapse
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,
mollonado said:
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,
Click to expand...
Click to collapse
First off, my apologies for this late reply (Been superbusy with school and internship assignments)
Secondly, and that is why I only use magisk. Because once you mess with the host file, depending on what module you install, it can range from tripping safetynet to bootlooping.
So quick question, is it still in this state right now since 9 days ago?
Greetings,
Kevin
+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
I made a mistake and could not install recovery stock, I followed what you wrote in the beginning install MM recovery and so I did a hard reset and I was able to install the most current recovery stock and installed ROM Oreo, Thanks. Sorry, I'm on google translator.
I have a Tab E 8 (SM-T377P) and I cannot get any version of TWRP new than 2.8.7.0 to flash, Magisk will not flash, and no custom roms will install.
I've tried both lineage 15.1 and 16, both the standard and GO versions.
It's on stock firmware, 5.1
I rooted with cfautoroot with Odin 3.10.7.
Hopefully someone has an idea on what I need to do.
:edit:
I was able to get magisk installed by rerooting with cfautoroot and then doing a full unroot and restoring bootimage with supersu. Still can't install any roms though
So I was able to update to Nougat using the rom posted in this thread. It was the ONLY place I was able to find the stock firmware. I was hoping that installing 7.1.1 would put me on a new bootloader/kernel that might allow me to install an Oreo rom.
Still, the only TWRP that I can get to boot is the one posted in this thread, which is 2.8.7. The dev posted links to 3.0.2-1 that do not work, but I've tried multiple different versions of TWRP, and they all boot loop and I have to reinstall 2.8.7 via Odin.
All roms say that they are intended for SM-T377P and cancel, although my device is exactly that.
So, after doing a total wipe and flash back to stock 7.1.1 using Odin, I was able to boot back into Download mode and install the latest version of the TWRP posted in this thread - https://forum.xda-developers.com/ga...official-lineageos-16-0-galaxy-tab-e-t3847488
Still won't let me install a custom rom though...
Alright got it up and running on Lineage 16.
I bought this off of eBay to use as a dashboard for my smart home. When I opened it and put it into download mode for the first time, I noticed that it said it was running a custom binary even though everything looked bone stock, it wasn't even rooted. I didn't pay it any mind and went about trying to root it and install TWRP as the dew guides stated. Nothing would work, so I decided to upgrade it to stock 7.1 since it was on 5.1. After I did this, I noticed that in download mode it stated that it was on stock binary and I was able to update to the most recent TWRP for this device. Then I was able to install Lineage and all is well now.
This thread doesn't appear to be getting any traction, but I figured I'd update it in case someone searches a similar issue in the future.
Krunk_Kracker said:
Alright got it up and running on Lineage 16.
I bought this off of eBay to use as a dashboard for my smart home. When I opened it and put it into download mode for the first time, I noticed that it said it was running a custom binary even though everything looked bone stock, it wasn't even rooted. I didn't pay it any mind and went about trying to root it and install TWRP as the dew guides stated. Nothing would work, so I decided to upgrade it to stock 7.1 since it was on 5.1. After I did this, I noticed that in download mode it stated that it was on stock binary and I was able to update to the most recent TWRP for this device. Then I was able to install Lineage and all is well now.
This thread doesn't appear to be getting any traction, but I figured I'd update it in case someone searches a similar issue in the future.
Click to expand...
Click to collapse
Thank you for documenting your progress.
I am in a similar situation.
I am the original owner of my t377p.
I'm going to try your steps to see if it will work for me.
UPDATE:
Flashing back to Stock and starting the process all over again, as you described above--fixed the problem. I am now running LineageOS16.
Thank you!
I'm glad it worked for you!
That's exactly why I updated the thread, I knew I wouldn't be the last one have this odd issue.
Do you have a copy of twrp the servers are down and I've been trying for week to download it