Hi everyone,
I need a native fastboot image for modemst1 and modemst2.
Yes i now some of you don´t want to upload the file because of the IMEI
But my opt coldn´t detect my imei so simcard detection couldn´t work .
The get the issue after flashing the MIU7 ROM , please don´t flash the ROM
If there is somebody who want to upload the modemst 1 and modemst2 please make a replay with the link or send my the file or with a email
Thanks for your attention
and hope i get the file soon
and sorry for my bad English
i have created a shell script and batch script, for a stock reset opt [modemst1 & modemst2]
Thnx for Information
I had that same after install Miui v7, phone got hardbrick.
I used download tool for back 100% Oxygen Os.
Phone woke up but had problem with wifi+sim no detect.(Imei Gone)
It was problem with EFS Partition damaged I think.
User RevUnix saved my time and life
You must use adb console and put :
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Note: Please be sure you have unlocked bootloader
That should repair your phone
It worked
lukaszlol1990 said:
I had that same after install Miui v7, phone got hardbrick.
I used download tool for back 100% Oxygen Os.
Phone woke up but had problem with wifi+sim no detect.(Imei Gone)
It was problem with EFS Partition damaged I think.
User RevUnix saved my time and life
You must use adb console and put :
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
Note: Please be sure you have unlocked bootloader
That should repair your phone
Click to expand...
Click to collapse
Thank you for your help
i have earsed modem , modemst1 , modemst2 using fastboot without taking a backup any ideas how to restore or does any one have a backup thanks
saifo11 said:
i have earsed modem , modemst1 , modemst2 using fastboot without taking a backup any ideas how to restore or does any one have a backup thanks
Click to expand...
Click to collapse
First you should have a custom recovery (e.g. TWRP) installed, if not, flash using fastboot. Then download and flash any ROM. You can find a lot of them easily in the A6000 sub forum here at XDA.
sasukay said:
First you should have a custom recovery (e.g. TWRP) installed, if not, flash using fastboot. Then download and flash any ROM. You can find a lot of them easily in the A6000 sub forum here at XDA.
Click to expand...
Click to collapse
i have flashed alot of roms but no luck , is there a backup for modemst1 and modemst2
saifo11 said:
i have flashed alot of roms but no luck , is there a backup for modemst1 and modemst2
Click to expand...
Click to collapse
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
EFS_Lenovo_A6000.qcn
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
EFS_Lenovo_A6000.qcn does this file need to be flashed
saifo11 said:
EFS_Lenovo_A6000.qcn does this file need to be flashed
Click to expand...
Click to collapse
No, actually I didn't created the zip and I don't know what it contained. But, as the zip name suggests, "modem and stuff", I thought it would contain the modemst1/st2 .bin files; and didn't know what else it would contain. So, you just have to flash the modemst1/st2 files and not any others. But, in case, you lost your IMEI too, after flashing the files; I suggested that thread to help you out with it.
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
the post you provided worked thanks alot
what is this for? will this fix the bad signal on my carbon kitkat rom?
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
Hello Sasukay..
Can you pls provide the link for downloading the modem files for lenovo k3 note. Or will this same file fix my network issues??
shamanth_gowda said:
Can you pls provide the link for downloading the modem files for lenovo k3 note.
Click to expand...
Click to collapse
Got this MODEM FIRMWARE FILES for LENOVO K3 Note on Lenovo K3 Note forum. I don't know if it works, but you can try flashing this patch, maybe it will.
sasukay said:
Got this MODEM FIRMWARE FILES for LENOVO K3 Note on Lenovo K3 Note forum. I don't know if it works, but you can try flashing this patch, maybe it will.
Click to expand...
Click to collapse
The link you provided is not opening
shamanth_gowda said:
The link you provided is not opening
Click to expand...
Click to collapse
https://drive.google.com/drive/u/0/...JhY0ZoakdUZW4xYXVjRGVzNnpuR21naWtVN1IxMTFQZ1U
sasukay said:
https://drive.google.com/drive/u/0/...JhY0ZoakdUZW4xYXVjRGVzNnpuR21naWtVN1IxMTFQZ1U
Click to expand...
Click to collapse
Thank you for the new link. But unfortunately this is not helping me in getting my signal back on my k3 note.
Please suggest me a solution.
Thanks in advance
shamanth_gowda said:
Thank you for the new link. But unfortunately this is not helping me in getting my signal back on my k3 note.
Please suggest me a solution.
Thanks in advance
Click to expand...
Click to collapse
I have K6 Power (K33A42) and also erased the modemst1 and -st2 parts. Could anybody share his backup of modemst1?
Flashing newest stock ROM did not helped.
Please...
I have created bcn file with my imei no but my device not recognized by my laptop is there any other method I can flash bcn file
sasukay said:
I think THIS ZIP would definitely contain the modemst1 and modemst2 files.
Flash them using :
Code:
fastboot flash modem modemst1.bin
fastboot flash modem modemst2.bin
And, should you need to change the IMEI later, FOLLOW THIS.
Click to expand...
Click to collapse
Unfortunatelly my K6 Power did not find modem partition during fastboot flashing... Is there any other method to flash this files?
doswar said:
I have created bcn file with my imei no but my device not recognized by my laptop is there any other method I can flash bcn file
Click to expand...
Click to collapse
Last time I checked it was qcn.?!! And to restore the qcn backup one has to boot the device into Qualcomm Diagnostic Mode and then restore the qcn backup using QPST software. You need qualcomm serial port drivers installed on your pc for your device to get detected.
mL-7 said:
Unfortunatelly my K6 Power did not find modem partition during fastboot flashing... Is there any other method to flash this files?
Click to expand...
Click to collapse
The modem partition could have been renamed with some other name, but it must be there. The files I provided were intended to be used on Lenonvo K3 Note and not K6 Power. So even if the files were flashed, they wouldn't have helped. Check Lenovo K6 Power sub forum there's this link to qcn file for Lenovo K6 Power which might come handy.
Good luck to both. I won't be able to help you with anything else now. GTG. I'm busy.
sasukay said:
Last time I checked it was qcn.?!! And to restore the qcn backup one has to boot the device into Qualcomm Diagnostic Mode and then restore the qcn backup using QPST software. You need qualcomm serial port drivers installed on your pc for your device to get detected.
The modem partition could have been renamed with some other name, but it must be there. The files I provided were intended to be used on Lenonvo K3 Note and not K6 Power. So even if the files were flashed, they wouldn't have helped. Check Lenovo K6 Power sub forum there's this link to qcn file for Lenovo K6 Power which might come handy.
Good luck to both. I won't be able to help you with anything else now. GTG. I'm busy.
Click to expand...
Click to collapse
sorry for mistake it's qcn but where I can get drivers
doswar said:
sorry for mistake it's qcn but where I can get drivers
Click to expand...
Click to collapse
Qualcomm USB drivers
Was just a google search away.
sasukay said:
Qualcomm USB drivers
Was just a google search away.
Click to expand...
Click to collapse
Thank you
Hello, since i had gps issues i've reflashed the modem on adb and then erased modemst like this:
mfastboot flash modem [email protected]@[email protected]@NON-HLOS-64bit.bin
fastboot erase modemst1
fastboot erase modemst2
So the gps seems to be ok now, but the phone data is stuck on edge, and if i force 3g from the settings it doesn't connect at all
so i've putted stock recovery , wiped all data and installed a complete stock update but with no luck.
anyone have some idea?
EDIT: i've noticed that i don't have imei anymore... how to restore it?
reddevilx said:
Hello, since i had gps issues i've reflashed the modem on adb and then erased modemst like this:
mfastboot flash modem [email protected]@[email protected]@NON-HLOS-64bit.bin
fastboot erase modemst1
fastboot erase modemst2
So the gps seems to be ok now, but the phone data is stuck on edge, and if i force 3g from the settings it doesn't connect at all
so i've putted stock recovery , wiped all data and installed a complete stock update but with no luck.
anyone have some idea?
EDIT: i've noticed that i don't have imei anymore... how to restore it?
Click to expand...
Click to collapse
This is only a theory.
You need to else another rooted device ze550kl.
Commands for new device:
adb shell
su
cat /dev/block/mmcblk0p16 > /mnt/sdcard/modemst1.img
cat /dev/block/mmcblk0p17 > /mnt/sdcard/modemst2.img
Commands for old device:
adb reboot bootloader
fastboot flash modemst1 modemst1.img
fastboot flash modemst2 modemst2.img
The way to "/dev/block/mmcblk0p16" and "/dev/block/mmcblk0p17" is for a device ze500kl. I do not know to way for your device ze550kl.
Thank you Muminek111,
i've tried but with no luck, i've copied and flashed mmcblk0p16 and mmcblk0p17, the files exists but it doesn't change anything.
reddevilx said:
Thank you Muminek111,
i've tried but with no luck, i've copied and flashed mmcblk0p16 and mmcblk0p17, the files exists but it doesn't change anything.
Click to expand...
Click to collapse
I do not know if your device ze550kl has "modemst1" partition name "mmcblk0p16". It's the name for ze500kl device. You have to search in folder dev/block/............ I have the names in folder dev/block/platform/soc.0/7824900.sdhci/by-name.
You can flash back modem partition if you will know the name. The name of my modem partition is mmcblk0p38.
I don't understand;
this is the /dev/block/platform/7824900.sdhci
http://pastebin.com/Ebit7VFJ
this is /dev/block/platform/7824900.sdhci/by-name
http://pastebin.com/fx8FbBdU
modem is p35, modemst1 is p36 and modemst2 is p37?
i think i'm making a mistake because doing so i have a huge modemst2
i also don't understand why restoring a full twrp backup doesn't solve it
reddevilx said:
I don't understand;
this is the /dev/block/platform/7824900.sdhci
http://pastebin.com/Ebit7VFJ
this is /dev/block/platform/7824900.sdhci/by-name
http://pastebin.com/fx8FbBdU
modem is p35, modemst1 is p36 and modemst2 is p37?
i think i'm making a mistake because doing so i have a huge modemst2
i also don't understand why restoring a full twrp backup doesn't solve it
Click to expand...
Click to collapse
I think that the twrp recovery doesn't backs up all partitions.
This are my screenshots the folders from an apk Total Commander.
https://drive.google.com/file/d/0B7F3ZXr565GkYWJJT1ByX0VqQTQ/view?usp=drivesdk
https://drive.google.com/file/d/0B7F3ZXr565GkdXFxSVluSHAzUXM/view?usp=drivesdk
But everything shows to the folder dev/block/
Therefore is the command cat /dev/block/.......... > /mnt/sdcard/modemst1.img
OK, so now with total commander i found that
Modem is 41
Modemst1 is 18
Modemst2 is 19
i've flashed the new ones but i'm still with null imei.
Thank you anyway i've learned something new
You should back up the partition before every command erase partition.
I've made a backup from a working phone but it doesn't work, i think that the board may be faulty.
Thank you anyway
Hello everybody, I am from Argentina
As I told in the title, my phone has no signal and the radio is always off. I can see my imei at phone info.
-Cannot turn radio on, at *#*#4636#*#* menu.
-I have tried to restore stock roms from github.com/motoxplay/stock, but it's the same.
-I have erase modem1/2, and reflash proper NON-HLOS.bin and fsg.mbn partitions with no luck
I search a lot and I didn't find any clue in how to repair it, I continue without phone
I think I need a QCN backup file to restore the qualcomm settings to stock.
Anyone can share something I can try?
Can anyone share a QCN backup (remember to erase your imei info)?
Deleted
I have Lenovo K6 Power K33a42 which had network issue. Either of the sims worked at any time on whichever sim the mobile data was enabled. I referred XDA forums and based on suggestions ran these commands
adb reboot bootloader
fastboot erase modemst1
fastboot erase modemst2
fastboot reboot
After which networks of both sims weren't connecting. On checking IMEI 1 AND 2 found it was 0. The baseband is however intact.
I have done factory reset which didnt help, even flashed through Rescue and Smart Assistant tool yet the IMEI 0.
I am pretty sure many had faced this and there could be working solution, kindly share the solution to restore IMEI number.
Note that, I have the phone box which has IMEI number.
There could be many ways of dealing this, each and every one of yours solution may help. Kindly share.