hello
i have note4 N910F trltespr
it was on Originl v5 ROM, and after a year of working with it it starts freezing and rebooting and turning off.
i've installed lineage-14.1 (android v7) but the problem still exists.
u trued forcing the 4 cpu to run like in this thread:
https://forum.xda-developers.com/note-4/help/note-4-sm910f-freezing-rebooting-help-t3438552
but the same problem.
any idea?
Try stock to see if these problems still exist in stock ROM
Related
hi guys, i live india so i have the XOLO play tegra note 7 (xolo) i was on android 4.4.2 rooted and cwm recovery installed but my tab had a rare issue of restarting itself (only on kitkat) so i decided to go back to 4.3 jb or even 4.2. i downloaded 4.3 stock rom from an xda thread but it got stuck into endless bootloop. I had already made a backup of my original rom, so i restored it through cwm recovery but after restoring auto-rotation has stopped working and wifi dosen't switch on. it just shows turning on. Please help me guys what should i do. i tried various other stock roms availaible but they all do the same ( bootloop) what should i do. I think there is a difference between these tabs (xolo,advent,evga etc) i think they r different in some reason that's why their roms didnt work on my xolo play tegra note 7. Please help me guys .
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
Hello,
First post so big hello to everyone
I've recently startet experiencing issues with my Galasy X4 - issues always appear after encrypting device. Description:
- Device working fine on Ressurection Remix , CyanogenMod 12 and Stock ROM fine just after flashing (stable, all functionalities OK)
- My company email enforcing encryption or phone, straight after this process I cannot use my device (process goes without any problem, device rebooting). For example on stock rom I'm experiencing problem with NFC service all the time crashing, on CyanogenMod and Ressurection Remix Gapps process all the time stop responding etc. I cannot use my phone after encryption process ass all the time its crashing and I can only press OK all the time.
Is anyone aware of that kind of the issues? Any advices howto avoid them? Please let me know if you need any more details.
My Galaxy is S4 I9505 (LTE) bought in UK EE carrier
Stock firmware used:
http://www.sammobile.com/firmwares/download/38084/I9505XXUGNI2_I9505EVRGNI2_EVR
http://www.sammobile.com/firmwares/download/48203/I9505XXUHOD7_I9505EVRHOD1_EVR
Remixes used:
https://download.cyanogenmod.org/get/jenkins/113878/cm-12.1-20150613-NIGHTLY-jfltexx.zip
http://forum.xda-developers.com/gal...-0-2-ressurection-lollipop-5-2-7dark-t2994283
Many thanks for any suggestionso on this one.
P.S.
I'm using for flashing Odin / Heimdall ... because some reason Kies does not reconize my device - so I cannot go back to stock rom using it. Strange thing that going on stock 4.4 ROM is that when Im trying to perform update it says me that my device was modified - dont know is it imporant. Of course on stock firmwares I'm not using root (on ressurection & cm I installing CWM)
Dear Community,
I hope that this is the right place to post and any of you can help me.
My (aktual) Hardware/Software bits:
Galaxy Note 3 (SM-N9005)
Android: 5.1.1
Baseband-Version: N9005XXUGBOD3
Kernel-Version 3.4.108-f2fs-temasek-cm12.1-hlte-v1.25+
temaseksnappy #1
Temasek unofficial version V16.4
Build: LMY48J test-keys
Recovery: twrp 2.8.7.0-hlte-4.4
My actual problem is the following: My Note 3 by default had a 4.4.2 OFW on it, which I early upgraded to Lolipop 5.0.1. Everything works for the OFW 4.4.2 and 5.0.1 fine. As soon as I try to flash it with a CFW like CM11, CM12, CM12.1, CM12.1 (temaseksnappy), Gummy 4.4.4 I am losing the feature of auto rotation.
Of cource I did a clean flash, wiping DALVIK/CACHE/DATA and system, double time even one befor the flash, one after.
I also tried to put the battery, sim and sd out for few min before rebooting, while autorotation is manualy turned off.
Even a MODEM I flushed to fix this issue, but without success. Nothing helps but going back to OFW.
My last try was downgrading to the original 4.4.2, including baseband trieing from there to go to any CFW (CM11) as well as from OFW 4.4.2 -> OFW 5.0.1 -> CFW 5.1.1 (http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375)
There was also a post about a possible missing or broken lib in /system/lib which I replaced
Nothing helps (libGNU... something). This helped me alreay once in OFW after kicking out all the junk apps, but this is a different storry and not related anyhow.
Is there anybody out there who has the same problem or even better knows a solution?
My shot would be that:
1) CM has a problem with my particular hard-/software (Kernel, Baseband, Recovery, whatever) as I just tied CM or at least CM based CFWs.
PLEASE HELP.
Thank you very much in advance.
After about almost a year I cam back, giving again a try to CM, However I still have the same issue. Finally Anybody please!
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Rosli59564 said:
Do you have the same issue with touchwiz 5.1.1 and 6.0.1?. Not the cm/aosp roms which aren't samsung based.
Sent from my SM-N920C
Click to expand...
Click to collapse
Hello,
Thx for your reply. Right now I am on CM13 (temasek hlte v9.6)
http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375
This might should be specially compiled for sm-n9005 like mine.
Everything expect rotation works fine. However The accelleration is also working fine as I tested with "sensor test". Even the integrated camera App is rotating, however the rest is not.
In addition I downloaded "adaptive rotationfree", If I set it "stock Auto" nothing happens, but if I set it to "force auto" the rotation will work exacly once and then stops undtil I force it to portrait again.
What do you mean exactly with "touchwiz"? Is this jus a different kernel or a whole CFW?
As I wrote in the frist post I tried already a lot of CFW and ALL had this issue, but the OFW ;(
What shell I flush to get this working, which is not OFW?
BIG THX for YOUR HELP
Touchwizz is the firmware that comes with the stock Samsung firmware .
Also in custom Samsung based roms .
Hello,
thx for the tip with TouchWiz vs aosp. At the moment I am running "DarkLord N5 Release Candidate 2.12" which can get find here: http://forum.xda-developers.com/galaxy-note-3/development/rom-darklord-s6-port-alpha-t3083087
This Rom is TouchWiz Based and guess what ....
Autorotation works.
However I do not understand what the problem realy is and would prefer to run cm13 insteat. I mean even samsung devices got a accellerator within which works also fine with AOSP software, showing numbers moving while turning the phone. In addition for example on the post http://forum.xda-developers.com/galaxy-note-3/development/hlte-spr-vzw-temaseks-unofficial-t2953375 it is said that this is explicite for note 3 including the model n9005. So ...
Can anybody point me to the problem or even better to the fix?
Is there any chance CM would fix this?
Regards
So I tried everything mm rom and kernel out there in my note 4 always restarted sooner or later then I changed to Lloyd Dr ketone l16f and phone doesn't restart in 4 days.
Is there a way to fix marshmallow restarting just like in Lollipop? Thanks
just installed apocalypse rom 7.1.2 and it restarted in less than 5 minutes whats going on? is anything i can do to stop restarting with marshmallow? thanks
Hi guys! my s3 neo started randomly bootlooping after 1 year, I had RR 5.5.9 on it. I noticed that if I press button_vol_up when bootlooping the phone starts to access recovery, but suddenly continue rebooting so I tried to wipe ALL in the s3 neo from TWRP and with Odin I reflashed a new version of TWRP. After that, I clean installed the RR 5.5.9 and for a few days started working good.
Yesterday night the problem seems reappeared and then I soldered a new power button thinking it was the problem ( even if it's a random problem, it seems) but without fixing this problem. So I decided to desolder the power_button and starting using without it, and the phone was working very good, after 6 hours booom! the bootlooping is still here.
Can anyone help me? Thanks in Advance
When your RR is based on CM12.1 then the bootloop occurs when you install some new updated apps. You have 3 choices.
1) avoid these apps
2) Inform the developer of the apps, that with the new update your cm12.1 version gets a bootloop. The bootloop occurs, when the updated Version of the app was build with the new android build tools. The Solution is to use aapt instead of aapt2
3) upgrade to cm13 or cm14.1 . Theres also a RR based on 14.1. I didn't try this version, but i think with this rom you will not have the bootloop
same problem.
I have tried to flash it with many firmware without any success.
any help
alaa92 said:
same problem.
I have tried to flash it with many firmware without any success.
any help
Click to expand...
Click to collapse
What exactly is your problem?
Meanwhile there are quite stable Custom Roms that would be there:
- CM 12.1 from December 2017 (no more bootloops!)
- LOS 14.1 from August or also December 2018
- crDroid from November 2018