I was follwing this thread to repartition but got failed
and hard bricked my yureka
http://forums.yuplaygod.com/threads...e-partition-sizes-system-recovery-cache.13626
I tried doing everything, not rebooting to recovery either. If i try to restore stock factory images it says device:locked. When I try to unlock bootloader it says failed. I am going nuts from the past 4 hours trying to fix this. Please someone help me out. I have a feeling my EMMC got damaged or corrupted. And I followed the steps to the last letter. Also I am not such a noob that I will do stupid steps or forget performing a single step. Please help me out. I am not able to reboot into recovery using fastboot either. Stock cyanogen recovery works. That's about it. Besides that bootloop of Yu logo.
when installing recovery, it says
target reported max download size of 268435456 bytes
sending 'recovery' (20480 KB)...
OKAY [ 0.656s]
writing 'recovery'...
FAILED (remote: device is locked)
finished. total time: 0.661s
Click to expand...
Click to collapse
when unlocking bootloader, it says
(bootloader) Warning: unlock will wipe all user data
(bootloader) Press Volume Up key to confirm
(bootloader) Press Volume Down key to cancel
(bootloader) Erasing userdata.
FAILED (remote: failed to erase partition)
finished. total time: 6.793s
Click to expand...
Click to collapse
Please anybody help me....
flash stock rom using fastboot !!
i cant... bootloader in locked and I cant flash anything... it says device locked if I install anything
My Moto G4 Plus has now no OS installed on it. I'm currently following a site (Stock Firmware of Moto G4 and Moto G4 Plus) to flash it back to stock. Right now i'm stuck at the last step (I skipped step 5 just to be sure of that each command is working). 1st command was working, but then 2nd command is got this:
Code:
C:\adb>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.000s]
writing 'partition'...
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.053s
C:\adb>
Seems like this has been happening to older Moto G version (like Moto G 3 Gen, Moto E).
Can anybody help me, i'm really stuck and can't get anything to work. :crying:
http://www.filefactory.com/folder/c6cdedc45a775d27/?sort=created&order=DESC&show
Enviado desde mi Moto G (4) mediante Tapatalk
Aqryllic said:
My Moto G4 Plus has now no OS installed on it. I'm currently following a site (Stock Firmware of Moto G4 and Moto G4 Plus) to flash it back to stock. Right now i'm stuck at the last step (I skipped step 5 just to be sure of that each command is working). 1st command was working, but then 2nd command is got this:
Code:
C:\adb>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.000s]
writing 'partition'...
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.053s
C:\adb>
Seems like this has been happening to older Moto G version (like Moto G 3 Gen, Moto E).
Can anybody help me, i'm really stuck and can't get anything to work. :crying:
Click to expand...
Click to collapse
Apparently you're trying to downgrade or install the wrong version of the firmware. The firmware has exactly to meet the version of your phone. So, for instance, for an XT1642 you flash software for an XT1642 and not for an XT1644. Read carefully and flash every file one by one in the exact order. And be sure your bootloader is unlocked.
Send with my Moto G4 Plus (XT1642) using Tapatalk!
rsd light 6.2.4 and fiemware
leave firmware zipped open rsd click browse and click firmware and then click unpack and start flashing ......works every time
Preflash validation failed error while flashing partition
I m also in trouble. Anybody please help.
I:\MOTO\ROMS\STOCK\G4_XT1641-XT1643_ATHENE_6.0.1_MPJ24.139-13.1_cid50_subsidy-DEFAULT_CFC.xml>fastboot flash partition gpt.bin
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slotartition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.005s]
writing 'partition'...
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.074s
vishnucr3000 said:
I m also in trouble. Anybody please help.
I:\MOTO\ROMS\STOCK\G4_XT1641-XT1643_ATHENE_6.0.1_MPJ24.139-13.1_cid50_subsidy-DEFAULT_CFC.xml>fastboot flash partition gpt.bin
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slotartition: not found
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.005s]
writing 'partition'...
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.074s
Click to expand...
Click to collapse
Your downloaded ROM is 6.0.1_MPJ24.139-13.1 , and its too old, which means you are downgrading firmware version.
Downgrading of gpt and bootloader is not possible, also it may cause problems to you.
Download latest firmware and flash it..
Hello. Edit your "flash.xml" from firmware and delete line related to "gpt.bin".
Reflash your firmware with rsdlight using flash.xml
moto g4 plus xt1643 stuck on fastboot mode
my moto g4 plus is bricked it was only showing
AP Fastboot Flash Mode (secure)
BL: B1.06(*) (sha-0edfb0d. 2017-06-01 12 : 10 : 43)
Baseband:
Product/Variant : athene_16mp 000000000000000 32gb P2A
Serial Number : 26da663
CPU : MSM8952
eMC : 32GB MICRON Q3J97V RV=08 PV=10 FV=00000000000000000A2
DRM : 3GB MICRON LP3 DIE=6GB M5=03 M6=00 M7=00 M8=7B
Console {NULL} : null
Tools Mode Config : DISABLED
Battery OK
oem_locked
Software Status : Modified
connect usb data cable
and i downloaded latest firmware of moto g4 plus xt1643 <Moto_G4_Plus_XT1643_ATHENE_MPJ24.139-63> it says that
(bootloader) Not in unlocked state
OKAY [ 0.028s]
finished. total time: 0.031s
C:\Users\shaikh\Downloads\mfastboot-v2>fastboot oem lock begin
...
(bootloader) Not in unlocked state
OKAY [ 0.860s]
finished. total time: 0.952s
C:\Users\shaikh\Downloads\mfastboot-v2>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.016s]
writing 'partition'...
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.110s
i checked many times that i was flashing a correct rom of correct model number
and i also flash a latest versions and old versions roms of moto g4 plus
NOW WHAT I DO PLZZZZZZZZZZZ HELP PLZZZZZZZZZZZZZZZZZZZZZ
nawazsk611 said:
my moto g4 plus is bricked it was only showing
AP Fastboot Flash Mode (secure)
BL: B1.06(*) (sha-0edfb0d. 2017-06-01 12 : 10 : 43)
Baseband:
Product/Variant : athene_16mp 000000000000000 32gb P2A
Serial Number : 26da663
CPU : MSM8952
eMC : 32GB MICRON Q3J97V RV=08 PV=10 FV=00000000000000000A2
DRM : 3GB MICRON LP3 DIE=6GB M5=03 M6=00 M7=00 M8=7B
Console {NULL} : null
Tools Mode Config : DISABLED
Battery OK
oem_locked
Software Status : Modified
connect usb data cable
and i downloaded latest firmware of moto g4 plus xt1643 <Moto_G4_Plus_XT1643_ATHENE_MPJ24.139-63> it says that
...
<snip>
writing 'partition'...
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 1.110s
i checked many times that i was flashing a correct rom of correct model number
and i also flash a latest versions and old versions roms of moto g4 plus
NOW WHAT I DO PLZZZZZZZZZZZ HELP PLZZZZZZZZZZZZZZZZZZZZZ
Click to expand...
Click to collapse
From the looks of it you used the blankflash for the B1:06 bootloader. The reason you're getting the pre-flash validation error is that the MPJ24.139-63 firmware is too old to flash onto your device (that's the Marshmallow 6.0 July 2016 patch, not the latest unless you're wanting Marshmallow), whereas you have at least the June 2017/Sept 2017 bootloader on your device.
I would strongly recommend you flash the latest stock ROM we have, which is here: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 You can either flash the NPJS25.93-14-13 firmware as in the main post, or towards the end of the post, there are links for NPJS25.93-14-18 (April 2018 security patch): https://forum.xda-developers.com/showpost.php?p=76416801&postcount=785
If you really want to use Marshmallow, you could in theory flash without flashing GPT and bootloader, but you must not use OTA updates. If you want to update, you need to flash stock firmware.
If you want MM... YOU should 1st flash latest nougat... And then.. Boot into twrp don't flash it.. Just boot... And then wipe system, dalvik, data, cache.. And then flash MM.. without flashing gpt.bin and bootloader..
And as suggested by @echo92 you should not take any OTAs.. You'll brick your device..
flash was succesfully done by following your steps (BIG THANKS FOR THAT)
but phone is not turning on after reboot
it comes with motorola logo and then it will automatic turn of and now only led was blinking
and when i press power + volume up button at 1 minute then motorola logo was reappear and
then the same process was happening
and in device manager it was showing qualcomm loader 900 or something like this i didn't remember
what is the solution
nawazsk611 said:
flash was succesfully done by following your steps (BIG THANKS FOR THAT)
but phone is not turning on after reboot
it comes with motorola logo and then it will automatic turn of and now only led was blinking
and when i press power + volume up button at 1 minute then motorola logo was reappear and
then the same process was happening
and in device manager it was showing qualcomm loader 900 or something like this i didn't remember
what is the solution
Click to expand...
Click to collapse
Hmm, is this with a locked bootloader or unlocked bootloader?
What steps did you use, just for clarification? Did you flash the stock ROM with or without re-locking instructions?
Are you able to boot to the bootloader still (using power and volume down whilst your device is powered off)?
I am sending you a video after flashing my moto g4 plus xt1643
It was like bootloop happening
This is a link that i uploded on youtube after flashing
https://m.youtube.com/watch?v=v0sT45xXcuw
nawazsk611 said:
I am sending you a video after flashing my moto g4 plus xt1643
It was like bootloop happening
This is a link that i uploded on youtube after flashing
https://m.youtube.com/watch?v=v0sT45xXcuw
Click to expand...
Click to collapse
From the video I see no bootloader unlocked screen, which suggests your bootloader is locked.
Can you confirm if you performed all the flashing steps and they were reporting [okay]? A locked bootloader is quite strict and will not let you boot with custom firmware or stock firmware from other builds (must be the same build). I'd recommend booting to the bootloader and reflashing the stock ROM again. Please keep the log and look for any errors. At this stage I would forget marshmallow and focus on flashing the latest stock Nougat ROM.
If a reflash does not work, you may have a hardware error which only a service centre can fix. A boot loop with a locked bootloader suggests either a bad flash or bad hardware.
[FIX]Just restore from a twrp backup
Aqryllic said:
My Moto G4 Plus has now no OS installed on it. I'm currently following a site (Stock Firmware of Moto G4 and Moto G4 Plus) to flash it back to stock. Right now i'm stuck at the last step (I skipped step 5 just to be sure of that each command is working). 1st command was working, but then 2nd command is got this:
Code:
C:\adb>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.000s]
writing 'partition'...
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.053s
C:\adb>
Seems like this has been happening to older Moto G version (like Moto G 3 Gen, Moto E).
Can anybody help me, i'm really stuck and can't get anything to work. :crying:
Click to expand...
Click to collapse
So i had the same problem with you, had tried to solve it for 12 hours straight and FINALLY I found a solution: search the internet for a TWRP backup and restore your phone to it. I managed to find one, but i have a z2 play. Hope you can find one as well.
i was downloaded latest firmware of moto g4 plus as you given a link of download now it was showing with this message
C:\Program Files\Minimal ADB and Fastboot>fastboot flash system system.img_sparsechunk.0
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:system: not found
target reported max download size of 536870912 bytes
sending 'system' (261013 KB)...
OKAY [ 11.739s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 14.474s
WHAT IS THE SOLUTION !!!!!
Aqryllic said:
My Moto G4 Plus has now no OS installed on it. I'm currently following a site (Stock Firmware of Moto G4 and Moto G4 Plus) to flash it back to stock. Right now i'm stuck at the last step (I skipped step 5 just to be sure of that each command is working). 1st command was working, but then 2nd command is got this:
Code:
C:\adb>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ 0.000s]
writing 'partition'...
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.053s
C:\adb>
Seems like this has been happening to older Moto G version (like Moto G 3 Gen, Moto E).
Can anybody help me, i'm really stuck and can't get anything to work. :crying:
Click to expand...
Click to collapse
Bro try using the RSD-Lite . I had the same issue. I flashed the same ROM using RSD-Lite and it all worked fine.
Use this guide https://www.rootjunky.com/rsd-lite-mac-linux/
Please flash gtb.bin and bootloader.img of stock Rome npjs25.93.14.18. If you need these files please email me your mail I'd on [email protected]. I will mail these files.
Phpatel2003 said:
Please flash gtb.bin and bootloader.img of stock Rome npjs25.93.14.18. If you need these files please email me your mail I'd on edited. I will mail these files.
Click to expand...
Click to collapse
Please note these files are also available here: https://drive.google.com/drive/folders/0B-GUyOfb8OgzcUl1NUtHYWNIR2M or from the stock ROM provided here: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
I would also remove your email address to limit spammers and potential threats to your email security. If a member needs your contact details, I'm sure they can private message you.
Bro...my phone moto g4 plus .I install marshmallow 6.0 something it's showing nougat update then I did download and install after installing now it's time to reboot it's switched off its showing led blinking not switched on then I was searching for solution then I got the blankflash file and tried it's open fastboot mode but no OS installed then I did tried marshmallow but not install then I was tried latest updated nougat it's installed working perfectly.after one day I got security patch update its 40MB .I did download and install then after installing it's time to reboot phone switched off its led blinking not switched on.then I did tried all previous blankflash including latest updated blankflash 8.1.0 anthena file but not working for me it's says something errors.
Please please help me ..I haven't any another mobile only one phone that's now hardbricked ...please:crying:
My phone was working great (rooted), and just this morning it freezed.
I hard rest it, and it reloaded to system and then freezed again after a short time.
Tried to re load it and it was stuck for more than 15 min in the boot animation.
Tried to get into TWRP, it showed the TWRP image but then rebooted.
Re flash TWRP 3.0.2, tried to enter into it but again rebooted.
Reinstalled the phone using
http://forum.xda-developers.com/moto-x-style/development/pure-firmware-tuff-wip-t3224833
with "Moto X Pure 3rd Gen (2015) XT1575 MPH24.49-18-3.zip" (using all the fastboot other than fastboot erase userdata)
After the reboot the phone shows the "warning bootloader unlocked" screen, a short vibration, keep this screen for 30 sec, and then turns off and do it all again.
When I try to get into recovery mode I see the "warning bootloader unlocked" screen followed by a broken droid image with the writing "No command."
Any idea on what can be done to save my phone?
Trying to restore on my other pc.
using "Moto X Pure 3r Gen (2015) - X2 WE-LTE-2CA - North America US Retail XT1575 MPH24.49-18_18.zip"
witch I once downloaded from Motorola, I run the first command:
>fastboot flash partition gpt.bin
And get this error:
target max-download-size: 512MB
sending 'partition' (32 KB)...
OKAY [ 0.098s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.819s
what's wrong?
You might need a newer version of ADB/Fastboot. I remember having a similar issue previously when flashing a stock ROM and had to update my software. It's not a guarantee, just a suggestion.
HH
Ooms
on my primary PC I downloaded "Minimal ADB and Fastboot"
and still the same error.
tested on my laptop (on it i did my first try) and here i can run this command
D:\Temp\Open\Moto X Pure 3rd Gen (2015) XT1575 MPH24.49-18-3>fastboot flash partition gpt.bin
target reported max download size of 536870912 bytes
sending 'partition' (32 KB)...
OKAY [ -0.000s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.662s]
finished. total time: 0.662s
but still cannot enter recovery or boot into the system
did a test and took a motorola logo from here http://www.droidviews.com/remove-un...ng-on-moto-g-moto-x-purestyle-using-fastboot/
opend and flashed it.
Now I have the M logo instead of the "warning bootloader unlocked" screen but still on the boot loop.
Very strange, but after only flashing the logo.bin, the phone menus in the fastboot changed abit (look to me like the old version) but still no recovery.
Also see that on "fastboot flash system system.img"
I get an error:
target reported max download size of 536870912 bytes
Invalid sparse file format at header magi
but than it sends the file and keep writing OKAY
So some thing is still working down there.... juts need to find the correct stuff to flash on it?
Solved!!
Ive tried some more images to flush.
at the end used XT1575_CLARK_RETUS_6.0_MPHS24.49-18-3_cid9_subsidy-DEFAULT_CFC
The phone did a very long boot but at the end it loaded into the system and managed to get my lost photos.
Then reflashed TWRP -> restored my last image and every thing is now working as before.
I was using LineageOS (latest official build). I was trying to flash an updated bluetooth modem image, and the boot screen said my image was corrupt.
I was able to use LGUP to reinstall US99610f. Now I'm stuck at the fastboot screen on very boot, even after removing the battery. The phone is locked again, and I can't flash the unlock key through fastboot.
Code:
target reported max download size of 536870912 bytes
sending 'unlock' (1 KB)...
OKAY [ 0.026s]
writing 'unlock'...
(bootloader) Error!!
(bootloader) Bootloader Unlock key write fail
FAILED (remote failure)
finished. total time: 0.068s
I'm unsure where to go from here, I've tried:
LGUP again
Hard power down/reboot
LG Mobile Flash Tool (CSE mode?), but that failed
Thanks,
Doug
DougWare said:
I was using LineageOS (latest official build). I was trying to flash an updated bluetooth modem image, and the boot screen said my image was corrupt.
I was able to use LGUP to reinstall US99610f. Now I'm stuck at the fastboot screen on very boot, even after removing the battery. The phone is locked again, and I can't flash the unlock key through fastboot.
Code:
target reported max download size of 536870912 bytes
sending 'unlock' (1 KB)...
OKAY [ 0.026s]
writing 'unlock'...
(bootloader) Error!!
(bootloader) Bootloader Unlock key write fail
FAILED (remote failure)
finished. total time: 0.068s
I'm unsure where to go from here, I've tried:
LGUP again
Hard power down/reboot
LG Mobile Flash Tool (CSE mode?), but that failed
Thanks,
Doug
Click to expand...
Click to collapse
I have this same ****ing error, you get anything fixed
?
Silentwidow said:
I have this same ****ing error, you get anything fixed
?
Click to expand...
Click to collapse
I used LG's Web Chat Support, told them what happened. They were very accommodating and sent me a prepaid shipping label. They classified it as an "In Warranty - Software Failure", fixed it and shipped it back to me.
They did this even though they knew it was bootloader unlocked. Took about 2.5 weeks total to get it back.
Doug
us 996 fixed
i had a h910 flashed over to us996 that was stuck in fastboot. i had tried everything from flashing all the us996 firmwares to frp reset and came up with nothing. i then flashed H91510c_00_VTR_CA_OP_1007.kdz it not only successfully flashed but got me out of fastboot mode. i am now reflashing the us996 10f and will re root and twrp .. hope this helps someone out.
I know that there are other threads that talk about this issue but I have looked at them, but none of them have any logical answer or explanation as to why it will not flash...
Code:
Threads I've read:
https://forum.xda-developers.com/moto-g4/help/moto-g4-xt1625-install-twrp-3-0-2-fail-t3456723
https://forum.xda-developers.com/moto-g4/help/unlocked-bootloader-twrp-flashed-ota-t3575229
https://forum.xda-developers.com/moto-g4/help/xt1625-prime-exclusive-reboots-twrp-t3429954
Guides I'm following:
https://wiki.lineageos.org/devices/athene/install
https://www.lineageosroms.org/forums/topic/moto-g-2016-4th-generation-twrp-recovery-installation-guide/
https://www.lineageosroms.org/forums/topic/install-twrp-recovery-android-using-fastboot/
Android OS:
https://download.lineageos.org/athene (latest one)
TWRP:
https://dl.twrp.me/athene/twrp-3.0.2-0-athene.img.html
Other Files:
http://www.rootjunkysdl.com/files/?dir=Moto%20G%204th%20Gen%20XT1625
https://download.chainfire.eu/1113/SuperSU/UPDATE-SuperSU-v2.82-20170528234214.zip
I'm using Ubuntu with ADB installed (I have flashed TWRP to a Nexus 7 (2012) before)
I can sideload TWRP with no problems (I've backed the system up already with TWRP)
Output:
Code:
fastboot flash recovery /home/user/Desktop/twrp-3.2.1-0-athene.img
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot: not found
target reported max download size of 536870912
sending 'recovery' (12644KB)...
OKAY [ 0.500s]
writing 'recovery'...
(bootloader) image not signed or corrupt
OKAY [ 0.194s]
finished. total time: 0.695s
Any suggestions?
What do you mean by TWRP not flashing, do you mean the error that appears or not having TWRP present after flashing?
What happens if you reboot directly to recovery after you flash? That error is normal and usually if you boot normally after flashing TWRP the stock recovery will overwrite the TWRP. By booting to recovery you'll fix TWRP and thus should be able to boot as normal afterwards.
Of course, do not accept OTA updates if you're choosing to stay on stock ROMs with TWRP flashed.