As the title says, I live in the US but bought a sm-g950fd from Pakistan while I was there. Software information tab is attached below.
How do I get to run spay in the US?
I have read a few threads about this but haven't found a definite answer. From my understanding I need to:
Backup and factory reset
Install UAE (XSG) firmware through Odin
Uninstall stock spay app and install the US one from apkmirror
Is this the correct way to enable Spay? How risky is it to flash the firmware? Will I lose OTA updates? My phone isn't rooted yet.
And in Odin, which file do i select in CSC. The one starting with Home_csc, or just csc ?
Here's what I did and got it working for me
https://forum.xda-developers.com/showpost.php?p=73498072&postcount=24
danman132x said:
Here's what I did and got it working for me
https://forum.xda-developers.com/showpost.php?p=73498072&postcount=24
Click to expand...
Click to collapse
Thanks for this. Do I need to have a foreign sim card or can it work without one?
Can I ask do you roam in the US with an international provider, or do you live here and have a US cellular provider?
ChikhaiBardo said:
Can I ask do you roam in the US with an international provider, or do you live here and have a US cellular provider?
Click to expand...
Click to collapse
I live here and have a US cellular provider
I live in the US. The only way I was able to change the region is by using the method I linked. I literally everything before that, flashing different versions etc, but only by changing the Sim card did it work. Paid about 10 USD to have the Sim shipped to me. It's been a while since I did it so I don't remember the specifics, but my link is pretty detailed
danman132x said:
I live in the US. The only way I was able to change the region is by using the method I linked. I literally everything before that, flashing different versions etc, but only by changing the Sim card did it work. Paid about 10 USD to have the Sim shipped to me. It's been a while since I did it so I don't remember the specifics, but my link is pretty detailed
Click to expand...
Click to collapse
Yeah, your method is very good. Any specific network to look for? And should I flash the latest firmware or a little older one?
So I managed to get an indian sim from a friend and installed the indian firmware. What happened is that my phone's CSC has changed, but it has changed to Italy (ITV). And apparently, Italy only has the single sim variant so I didnt get update to oreo as well :/
What should i do? get a sim card from another country and do the process over again? or just manually install the indian 8.0 firmware?
Samsung pay seems to work fine though
Related
This tutorial will help uk samsung galaxy s6 owners to debrand the S6 if locked to a network it will also get rid of all the network carrier bloatware and the good thing about this it will then allow you to get OTA Updates Quicker because u wont need to wait for your carrier to test the firmare before rolling it out Enjoy https://www.youtube.com/watch?v=-ey2Qn_n0t4
Wouldn't this trip the flash counter which would also mean losing your 2 year warranty?
Sent from my SM-G920F using XDA Free mobile app
Cybermax93 said:
Wouldn't this trip the flash counter which would also mean losing your 2 year warranty?
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
I believe since you're flashing official firmware, it won't be tripped. I bought an S6 from Germany and flashed with 3 UK firmware and can confirm my KNOX counter hasn't tripped.
Japultra said:
I believe since you're flashing official firmware, it won't be tripped. I bought an S6 from Germany and flashed with 3 UK firmware and can confirm my KNOX counter hasn't tripped.
Click to expand...
Click to collapse
I've skimmed through the tutorial video and it doesn't seem to have tripped Knox.
I'm looking to switch my s6 from TEL (Telstra AU) to XSA (Open AU).
Has anyone else tried to do this?
Cheers
will this work with an att s6
samdroid711 said:
I've skimmed through the tutorial video and it doesn't seem to have tripped Knox.
I'm looking to switch my s6 from TEL (Telstra AU) to XSA (Open AU).
Has anyone else tried to do this?
Cheers
Click to expand...
Click to collapse
I just did it with the Optus S6. Worked perfectly.
Can't find firmware for US
I'm on a T-Mobile Galaxy S6 right now. I want to follow your tutorial, even if I am in the US should I use the UK firmware model you used in the video? Is there a special international unlocked firmware for the US version (like there is one for Spain, for UK, etc).
Also, if the UK model will work on my T-Mobile phone in the US, will I suffer battery hits because the phone will be looking for UK bands or will it recognize that I'm in the US and will only look for the US bands? Thanks!!
madscientistdam said:
This tutorial will help uk samsung galaxy s6 owners to debrand the S6 if locked to a network it will also get rid of all the network carrier bloatware and the good thing about this it will then allow you to get OTA Updates Quicker because u wont need to wait for your carrier to test the firmare before rolling it out Enjoy https://www.youtube.com/watch?v=-ey2Qn_n0t4
Click to expand...
Click to collapse
thanks for making it but a quick written guide is much faster
Georgules said:
I'm on a T-Mobile Galaxy S6 right now. I want to follow your tutorial, even if I am in the US should I use the UK firmware model you used in the video? Is there a special international unlocked firmware for the US version (like there is one for Spain, for UK, etc).
Also, if the UK model will work on my T-Mobile phone in the US, will I suffer battery hits because the phone will be looking for UK bands or will it recognize that I'm in the US and will only look for the US bands? Thanks!!
Click to expand...
Click to collapse
It would look for bands based on the SIM I believe, but whether you can flash another region ROM is questionable. I thought there was something to prevent that, but I'm new to Samsung. I'm also curious if this will work. If it does, I'll just purchase an AT&T version as opposed to an unlocked one and then use this process.
bugsy said:
It would look for bands based on the SIM I believe, but whether you can flash another region ROM is questionable. I thought there was something to prevent that, but I'm new to Samsung. I'm also curious if this will work. If it does, I'll just purchase an AT&T version as opposed to an unlocked one and then use this process.
Click to expand...
Click to collapse
Well the BTU model has always meant internationally unlocked in terms of Samsung devices, so hopefully this will work. I'm trying to flash it on my T-Mobile device and then rooting it. Does anybody have any idea how to change the model number of the phone to BTU as well so I can get OTA updates?
@madscientistdam
Looks like there is another BTU build added to the sammobile site wonder if anyone will receive a ota?
http://www.sammobile.com/firmwares/database/SM-G920F/BTU/
Received an ota this morning guys, and it was the new build I posted above this post.
Just did this to my Vodafone AU S6 and it worked a treat. Also got an OTA update after a couple of reboots. Knox is still intact. Should work for other Aussie telco phones. Fixed my random freeze's and reboots that where happening flat out at one stage.
*Update- still getting random lockups, even after setting up as a new phone (using no backup). Flash went fine though...
Question. Would this be good for an Ireland Three carrier S6?
Cheers!
Debrand an American S6 Edge (Verizon) for use in Germany
Hi!
You write in your video tutorial that you don’t suggest it for American smartphones. I have a Samsung Galaxy S6 Edge from America (Verizon branded, firmware: G925VVRU4BOG9) and want to use it in Germany. So far, I have some annoying limitations (I can’t send text messages and I can’t roam). Do you – or anyone else reading this – have a hint or even a little tutorial for me? I’m so annoyed as neither Samsung nor Verizon or my German SIM card provider FONIC offers me support. The phone was a present from an American friend. So I’m not the original customer. I guess that’s one reason they don’t help. Whatever: I’ll appreciate your help! Thanks…
xkenikax said:
Hi!
You write in your video tutorial that you don’t suggest it for American smartphones. I have a Samsung Galaxy S6 Edge from America (Verizon branded, firmware: G925VVRU4BOG9) and want to use it in Germany. So far, I have some annoying limitations (I can’t send text messages and I can’t roam). Do you – or anyone else reading this – have a hint or even a little tutorial for me? I’m so annoyed as neither Samsung nor Verizon or my German SIM card provider FONIC offers me support. The phone was a present from an American friend. So I’m not the original customer. I guess that’s one reason they don’t help. Whatever: I’ll appreciate your help! Thanks…
Click to expand...
Click to collapse
Just try the tutorial, you don't have a working phone right now, the worst that could happen is a hard brick
godutch said:
Just try the tutorial, you don't have a working phone right now, the worst that could happen is a hard brick
Click to expand...
Click to collapse
And a hard brick is exactly what I don’t want to risk…
this I assume only works on the International 920F version of these phone, you can flash most any region on these (hence international is your first clue), this does not however work on the (American Carrier) branded phones like Sprint, ATT, Verizon, US Cellular ect ect , these are I am told firmware specific, I tried flashing T-Mobile firmware on a sprint phone and brick city, I mean even sprint could not get it back up flashing sprint firmware with their jig... so beware. U.S. Based Carriers got you under their thumb.
debrand
Hi just bought s6 edge on vodafone uk, firmware ver.5.1.1 G925FXXU3QOKN is there any chance to get it debranded.I was think to flash BTU one G925FXXU3COI9.is that safe and csc will be changed to BTU.I see lot debrand was done with firmware change from 5.0.2 to 5.1.1. is that thesame story 5.1-5.1
pwamik said:
Hi just bought s6 edge on vodafone uk, firmware ver.5.1.1 G925FXXU3QOKN is there any chance to get it debranded.I was think to flash BTU one G925FXXU3COI9.is that safe and csc will be changed to BTU.I see lot debrand was done with firmware change from 5.0.2 to 5.1.1. is that thesame story 5.1-5.1
Click to expand...
Click to collapse
Hi, did you proceeded through the debranding?
I'm also on the same firmware and want to flash a BTU one and just wanted to know if you succeed !
Suppose in the case I bricked my phone and I don't know the baseband version of it. Now what is the option to recover? Flash stock firmware via Odin but don't know the baseband??? What will happens if I flash another country stock firmware?? Will the phone hard brick?? Or it will work fine?? Thank you
The worst case is that your sim card will not work with that software. This is only if your phone is carrier locked.
If it is unlocked, or neverlocked as others put it, then you can flash any firmware you like, as long as it is for your respective phone model.
GDReaper said:
The worst case is that your sim card will not work with that software. This is only if your phone is carrier locked.
If it is unlocked, or neverlocked as others put it, then you can flash any firmware you like, as long as it is for your respective phone model.
Click to expand...
Click to collapse
Thank you sir, as u r always helpful. ??
But wait. Suppose I got phone as gift from my relative who live in UK and I live in Nepal. Which country firmware should I flash?? UK or Nepal??
Athakuri700 said:
But wait. Suppose I got phone as gift from my relative who live in UK and I live in Nepal. Which country firmware should I flash?? UK or Nepal??
Click to expand...
Click to collapse
Make sure that this phone isn't locked to O2 or any UK carrier.
Sent from my ASUS_Z00AD
Athakuri700 said:
But wait. Suppose I got phone as gift from my relative who live in UK and I live in Nepal. Which country firmware should I flash?? UK or Nepal??
Click to expand...
Click to collapse
You should flash Nepal firmware then. It would give you better (more match) CSC code. The CSC (Consumer Software Customization) code contains the info about software packages specific to a particular region, carrier branding and also APN (Access Point Name) settings for data connection.
In my case, my S4 i9500 was made in Vietnam and when I received it, it had a Thailand firmware on it. It is a network unlocked phone. I live in USA. The first lollipop firmware came out was for Russia. So I flahsed the Russian firmware. My CSC showed that it is a russian phone. I used that phone on AT&T network that available in USA, China and Korea, and I had no problem.
Nothing will happen.
@sway8966
Are you really to suggest him to flash Nepali firmware on UK phone? I'll unlock it (the carrier-lock) first and then flash other countries' firmware if need.
Sent from my ASUS_Z00AD
Sorry to bump this up but im having problems with my s6 edge (Maybe because of this).
I recently acquired a phone from a relative from UK. The OS is android 7.0 and the carrier is three.co.uk (H3G), we have reset the phone to its factory settings and accidentally didnt noticed that it do auto update on the OS, then this bootloops starts to occur.
The phone isnt network-locked because the phone can receive signals, messages and phone calls on local sim.
Now upon browsing around SamMobile, There is an available Firmware for this mobile and even the firmware which is available to Philippines but only ver. 6.0.1
Is this possible to use the PH one or still i go to UK(h3g)?
help please
once i take the firmware from other countries and then i install to my phone,
does my phone will going to operate that firmware even if it come from another country
because i tried to find firmware according to my respective country unfortunately i missed it.
so please i need your assistance ..please
Hello fellow S8 users,
I've recently purchased a Samsung S8 SM-G950FD from eBay as I wanted the Dual SIM capability. Version image attached, I'm not entirely sure where it's from.
Unfortunately the Samsung Pay version on the phone is in Chinese as are the promotion, images attached.
Can someone tell me if it's possible to get the Australian version on Samsung Pay on this phone?
Can I just update the ROM to an Australian version? If so, would I end up losing the Dual SIM capability?
Any help on this would be much appreciated.
Thank you.
Any suggestions?
kuri_2k said:
Hello fellow S8 users,
I've recently purchased a Samsung S8 SM-G950FD from eBay as I wanted the Dual SIM capability. Version image attached, I'm not entirely sure where it's from.
Unfortunately the Samsung Pay version on the phone is in Chinese as are the promotion, images attached.
Can someone tell me if it's possible to get the Australian version on Samsung Pay on this phone?
Can I just update the ROM to an Australian version? If so, would I end up losing the Dual SIM capability?
Any help on this would be much appreciated.
Thank you.
Click to expand...
Click to collapse
Your Australia cards should work as Australia already have support for Samsung Pay. I have setup few of my Indian cards with Australian version phone. I guess you need to bear with the Chinese though. Updating XSA room will definitely disable the Dual sim option and I am not sure 950FD support 950F.
venki5star said:
Your Australia cards should work as Australia already have support for Samsung Pay. I have setup few of my Indian cards with Australian version phone. I guess you need to bear with the Chinese though. Updating XSA room will definitely disable the Dual sim option and I am not sure 950FD support 950F.
Click to expand...
Click to collapse
Yeh the Samsung Pay Application doesn't like my American Express Card....
It states that Amex is not supported in my country, but in fact it's working on my Samsung S6, and my Gear 3.
So you think changing the firmware to AU I would lose the Dual SIM capabilities?
It might just be easier to try and get the Samsung Pay and Samsung Pay Framework from AU ROM and extract it to mine maybe?
If it's anything like the S7, you should be fine putting the Australian firmware on it. I got an S7 edge from the UAE and had to flash German firmware and the T-Mobile CSC to it for spay to finally work. It'll be trail and error, but the multi sim function never went away for me.
Since almost all the international S8/S8+s are on the multi CSC ROM, all you need to do is reset your phone (preferably from the recovery menu) and put in the Oz SIM and reboot. All the regional features are activated, and you get Oz SPAY.
Using that method, I am currently using the India SPAY on an Afghanistan S8+ (Dual sim) and Taiwanese S8 and both work with all cards.
cooolzzz_guy said:
Since almost all the international S8/S8+s are on the multi CSC ROM, all you need to do is reset your phone (preferably from the recovery menu) and put in the Oz SIM and reboot. All the regional features are activated, and you get Oz SPAY.
Using that method, I am currently using the India SPAY on an Afghanistan S8+ (Dual sim) and Taiwanese S8 and both work with all cards.
Click to expand...
Click to collapse
I've actually tried to restore to factory setting 6+ times with an assortment of sim cards from Vodafone, Optus, Telstra, Macquarie (Telstra variant), samsung pay keeps loading up as Taiwanese version (Chinese)...
I've recently asked a friend to extract his Samsung Pay & Framework.apk, it still loads Taiwan Samsung pay.
I think it's region locked?
I'm going to try and restore to XSA Firmware, apparently this worked for the S7 guys, whilst retaining Dual Sim functions.
neoslink1 said:
If it's anything like the S7, you should be fine putting the Australian firmware on it. I got an S7 edge from the UAE and had to flash German firmware and the T-Mobile CSC to it for spay to finally work. It'll be trail and error, but the multi sim function never went away for me.
Click to expand...
Click to collapse
Thank you! You've just reaffirmed what I actually just read in another forum, going to give it a try and will update my findings.
kuri_2k said:
I've actually tried to restore to factory setting 6+ times with an assortment of sim cards from Vodafone, Optus, Telstra, Macquarie (Telstra variant), samsung pay keeps loading up as Taiwanese version (Chinese)...
I've recently asked a friend to extract his Samsung Pay & Framework.apk, it still loads Taiwan Samsung pay.
I think it's region locked?
I'm going to try and restore to XSA Firmware, apparently this worked for the S7 guys, whilst retaining Dual Sim functions.
Click to expand...
Click to collapse
Did you try to factory reset from recovery? Vol up + Bixby + power, wait for few seconds it goes into recovery. Put the regional SIM in, then reboot. It will reboot twice and activate SIM specific features (prominently tells you that it's doing so).
Also please post a screenshot of the Settings->Software information screen (Service provide SW ver. is 2nd last row) both before and after you complete the process.
Someone recommended me this solution after I had a similar problem with my UAE S8 and flashing other country firmware no longer works without supporting SIM card. Download Samsung Pay version 2.7.03 and try that.
oplix said:
Someone recommended me this solution after I had a similar problem with my UAE S8 and flashing other country firmware no longer works without supporting SIM card. Download Samsung Pay version 2.7.03 and try that.
Click to expand...
Click to collapse
Worked for me as well !!
oplix said:
Someone recommended me this solution after I had a similar problem with my UAE S8 and flashing other country firmware no longer works without supporting SIM card. Download Samsung Pay version 2.7.03 and try that.
Click to expand...
Click to collapse
What do you mean flashing other country firmware no longer works without supporting SIM card ?
vortexmak said:
What do you mean flashing other country firmware no longer works without supporting SIM card ?
Click to expand...
Click to collapse
Means that it doesn't matter which firmware you flash if you don't have the country's sim card because s8 will default back to factory CSC. Only way to change CSC without root is to flash with the supporting sim card installed.
cooolzzz_guy said:
Since almost all the international S8/S8+s are on the multi CSC ROM, all you need to do is reset your phone (preferably from the recovery menu) and put in the Oz SIM and reboot. All the regional features are activated, and you get Oz SPAY.
Using that method, I am currently using the India SPAY on an Afghanistan S8+ (Dual sim) and Taiwanese S8 and both work with all cards.
Click to expand...
Click to collapse
Just came across this post. Wondering if the same method works with the dual sim version of S7 (G930FD)?
Thanks.
TopGun2000 said:
Just came across this post. Wondering if the same method works with the dual sim version of S7 (G930FD)?
Thanks.
Click to expand...
Click to collapse
Has anyone here got the Australian Samsung Pay app onto the Taiwanese dual-sim model? I purchased an S8+ at $799 (compared to the RRP of $1349) but I don't want to factory reset if I don't have to.
Anyone got spay working? Pkease share what firmware version are you using.
I've looked all over the forums and all the threads on carrier switching refer to switching US S8 variants to US carriers.
Can someone please explain or point me to a thread that explains how to carrier switch Canadian providers that would be fantastic. In particular I want to go from Rogers to Freedom Mobile (aka wind mobile) . My phone has been factory unlocked.
howellinmad said:
I've looked all over the forums and all the threads on carrier switching refer to switching US S8 variants to US carriers.
Can someone please explain or point me to a thread that explains how to carrier switch Canadian providers that would be fantastic. In particular I want to go from Rogers to Freedom Mobile (aka wind mobile) . My phone has been factory unlocked.
Click to expand...
Click to collapse
I can tell you from experience that freedom does not have any carrier specific features, so doing a firmware switch wont benefit you in any way I dont think.
You can however go onto sammobile and download the firmware for freedom and flash it using Odin. Again probably no real benefits. You would benefit if you were going the other way tho, as Rogers, Bell and Telus have carrier specific settings in their firmwares.
But since you are carrier unlocked, you could try a factory reset then put your freedom sim in it and boot up. It might install the freedom files. My S7 worked this way when i went from a Bell locked phone to a Koodo sim...
Edit: That link has an unlocked canadian firmware as well, you could use that firmware too.
Open the dialer and type *#243203855# then select GLW, this will change your csc to wind mobile/freedom, it'll wipe your phone..
peachpuff said:
Open the dialer and type *#243203855# then select GLW, this will change your csc to wind mobile/freedom, it'll wipe your phone..
Click to expand...
Click to collapse
Hi Peachpuff. I have an unlocked S8 phone from a Bestbuy canada marketplace seller. I tried using your code to change to the Telus CSC so I can get VOLTE but got the invalid MMI code error message. The about phone says its an SM-G950FD, and the only code the phone appears to accept is the one displaying the EMEI.
Hope you have some guidance on that ?
Thanks
starview332 said:
Hi Peachpuff. I have an unlocked S8 phone from a Bestbuy canada marketplace seller. I tried using your code to change to the Telus CSC so I can get VOLTE but got the invalid MMI code error message. The about phone says its an SM-G950FD, and the only code the phone appears to accept is the one displaying the EMEI.
Hope you have some guidance on that ?
Thanks
Click to expand...
Click to collapse
That's not a canadian s8, its an international one, so that code won't work and i doubt you'll get volte working at all.
Just enjoy your root friendly multi sim phone.
I've been doing fine since I got the Snapdragon S8 Unlocked from USA but recently I saw many places with Samsung Pay and thought it would be convenient to start using it and when I installed the app it defaults to the USA version, although I can still enter my card I am missing out on a lot of Indian Specific features on the SPay. I am guessing this is because the CSC is set to XAA and not any of the Indian ones. Is there any way to change it to Indian CSC codes without rooting?
EDIT: BTW I have tried going into recovery mode, formatting the device, rebooting it with my local SIM installed which did not work, it's still in XAA code. Please don't tell me it's a Snapdragon/Exynos thing which does not allow it to do it. Model G950U1
CapCloud said:
I've been doing fine since I got the Snapdragon S8 Unlocked from USA but recently I saw many places with Samsung Pay and thought it would be convenient to start using it and when I installed the app it defaults to the USA version, although I can still enter my card I am missing out on a lot of Indian Specific features on the SPay. I am guessing this is because the CSC is set to XAA and not any of the Indian ones. Is there any way to change it to Indian CSC codes without rooting?
EDIT: BTW I have tried going into recovery mode, formatting the device, rebooting it with my local SIM installed which did not work, it's still in XAA code. Please don't tell me it's a Snapdragon/Exynos thing which does not allow it to do it. Model G950U1
Click to expand...
Click to collapse
Here are instructions for carrier csc change and more:
https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
Likely flash the phone to : "INS", "Indian unbranded"
BBB
Being Party