Hello everyone I have spent hours trying to fix my phone I think it is completely bricked. I installed TWRP on this phone so I could get the latest software for the nubia z17s after trying to install EN_V106 something happend and my phone was stuck in bootloop then after trying to recover the phone it now just boots up blank into fastboot and I cannot install TWRP back onto the phone. help me please anyone
I managed to recover from a hard brick using nubia emergency tool 1.1.4 but I dont know how I could install a rom onto nubia z17s
EmreGze said:
I managed to recover from a hard brick using nubia emergency tool 1.1.4 but I dont know how I could install a rom onto nubia z17s
Click to expand...
Click to collapse
Put the file V.105 or V1.06 on the root of your phone. Go to recovery mode and choose update package. Select the file and start (this method work with stock recovery).
Another option is through OTG . But you need a OTG adapter to make this work.
Take a USB stick, preferably 2.0.
Take the OTG adapter, make sure it works.
Copy the firmware on the USB flash drive.
Switch off the your phone.
Connect the USB flash drive to the phone with the OTG adapter.
Press the UP and POWER buttons.
Select the language with the up / down buttons, confirm with the power button.
Select upgrade from OTG device
I've tried both options and both work.
Last method is flashing TWRP . Enter TWRP recovery and select install from zip. Select the file (v.105 or v1.06) and select install. The zip file should be on internal storage of your phone off course..
EmreGze please post setup Nubia emergency tool 1.1.4.
ronvanv said:
Put the file V.105 or V1.06 on the root of your phone. Go to recovery mode and choose update package. Select the file and start (this method work with stock recovery).
Another option is through OTG . But you need a OTG adapter to make this work.
Take a USB stick, preferably 2.0.
Take the OTG adapter, make sure it works.
Copy the firmware on the USB flash drive.
Switch off the your phone.
Connect the USB flash drive to the phone with the OTG adapter.
Press the UP and POWER buttons.
Select the language with the up / down buttons, confirm with the power button.
Select upgrade from OTG device
I've tried both options and both work.
Last method is flashing TWRP . Enter TWRP recovery and select install from zip. Select the file (v.105 or v1.06) and select install. The zip file should be on internal storage of your phone off course..
Click to expand...
Click to collapse
Yes I done exactly this I think there was a problem with the Geekbuying software and it caused a bootloop after using the emergency tool I tried this and any ROM I used worked! Thanks for the reply however. I think the emergency tool recovered the original files
hanakyn said:
EmreGze please post setup Nubia emergency tool 1.1.4.
Click to expand...
Click to collapse
I made a thread you will need to go to this link I was unable to upload the file.
https://forum.xda-developers.com/nubia-z17/how-to/nubian-emergency-tool-1-1-4-17-series-t3728941
Thx
Where can I find the twrp for nubia z17s
ronvanv said:
Put the file V.105 or V1.06 on the root of your phone. Go to recovery mode and choose update package. Select the file and start (this method work with stock recovery).
Another option is through OTG . But you need a OTG adapter to make this work.
Take a USB stick, preferably 2.0.
Take the OTG adapter, make sure it works.
Copy the firmware on the USB flash drive.
Switch off the your phone.
Connect the USB flash drive to the phone with the OTG adapter.
Press the UP and POWER buttons.
Select the language with the up / down buttons, confirm with the power button.
Select upgrade from OTG device
I've tried both options and both work.
Last method is flashing TWRP . Enter TWRP recovery and select install from zip. Select the file (v.105 or v1.06) and select install. The zip file should be on internal storage of your phone off course..
Click to expand...
Click to collapse
Where can I find the twrp for nubia z17s?
TWRP https://bbs.nubia.cn/thread-1130302-1-1.html
on the side everything is chinese. I could find on the side no downloadlink. does anyone have a download link for the TWRP?
Related
My milestone 2 is completed bricked and can't be recognized by PC. But I can log in the official recovery screen. I have downloaded a update.zip file from a link （not sure if it is an official link, as I can't find it through Motorola website). It prompted "signature error" when installed. Not sure anyone can provide an update.zip file, so that I can try if I can save my Milestone2. Thanks in advance!
as long as you can enter the stock recovery. your device isn't bricked. did you try to do a full wipe in stock recovery? did you try to use another usb port in bootloader mode? sometimes you get a black screen in bootloader mode, but you pc recognizese your device very well. did you install all drivers on your pc?
lulli1 said:
as long as you can enter the stock recovery. your device isn't bricked. did you try to do a full wipe in stock recovery? did you try to use another usb port in bootloader mode? sometimes you get a black screen in bootloader mode, but you pc recognizese your device very well. did you install all drivers on your pc?
Click to expand...
Click to collapse
1. I have tried full wipe, but didn't work. The machine reboot again and again;
2. I have tried another usb port, another PC and even another operating system (win7 and winXP), also didn't work.
3. I am sure I have installed the drivers, as PC can recognize my phone when it is OK before;
As I can only entered the official recovery screen, I think I can try if it worked when I update with an official update file. Anyway, thanks for your suggestions and reply!
hi,guy.i think you should do the curect usb driver for your pc recongnizing first. than choose a ringt bootlaoder offical ROM. curse your phone can login the rockrecovery screen means its ok! isn't?
I think the only way for you to get an update.zip is with another milestone 2 running froyo, that way you can update it via OTA, and before the phone reboots, take the update.zip from the /cache partition.
Sent from the U
hi i have lg g2 d802 few weeks i upgrade to kitkat an today i dwongrade to stock bcz i wanteed to instal cm latest version so i instaled twrp and i wiped all from phone inculding the back up of stock and zip file of cm i didnt knew,,, and i cant do anything phonee stuck in logo mode..anyone knows what i need to do to pls?
skyrom006 said:
hi i have lg g2 d802 few weeks i upgrade to kitkat an today i dwongrade to stock bcz i wanteed to instal cm latest version so i instaled twrp and i wiped all from phone inculding the back up of stock and zip file of cm i didnt knew,,, and i cant do anything phonee stuck in logo mode..anyone knows what i need to do to pls?
Click to expand...
Click to collapse
Can you enter in download mode (Turn off the device, then press volume up and down, and while you are pressing them, connect the usb cable)?
Or can you enter in recovery mode?
If you can, in download mode flash a stock rom by lg flash tool, or in recovery flash a rom by otg cable...
Nicolo234 said:
Can you enter in download mode (Turn off the device, then press volume up and down, and while you are pressing them, connect the usb cable)?
Or can you enter in recovery mode?
If you can, in download mode flash a stock rom by lg flash tool, or in recovery flash a rom by otg cable...
Click to expand...
Click to collapse
yes i can enter donwload mode and shows me i have no rom instaled and also i cant flash rom,, it doesnt work
wow,,. nvm i fixed with otg cable ty for help nicolo234
skyrom006 said:
yes i can enter donwload mode and shows me i have no rom instaled and also i cant flash rom,, it doesnt work
wow,,. nvm i fixed with otg cable ty for help nicolo234
Click to expand...
Click to collapse
Use Thanks button, it's there for this
Happy you have fixed
please help
Nicolo234 said:
Use Thanks button, it's there for this
Happy you have fixed
Click to expand...
Click to collapse
can you send me instruction on how to do this wth otg cable i have an g2 d800 flashed an d802 firmware and now it thinks its an d802 doesnt let me flashed back through lgtool in ubuntu its show invalid gpt with valiid mbr can you please explain on how to do this?
xniightx said:
can you send me instruction on how to do this wth otg cable i have an g2 d800 flashed an d802 firmware and now it thinks its an d802 doesnt let me flashed back through lgtool in ubuntu its show invalid gpt with valiid mbr can you please explain on how to do this?
Click to expand...
Click to collapse
Otg cable is useful if it lets you enter into recovery... If it does, do the following steps:
1- FROM PC:
Download the rom you wanna flash (for d800), better if it isn't heavy, maybe download one of the aosp rom (300 mb max);
When the download ends, take a usb pen, connect it into the pc, then move the rom in the usb.
2- FROM THE PHONE:
Enter recovery mode (search how on google, its really easy);
Once you're into recovery, connect the otg cable with the usb pen you used before;
If you are on TWRP, go to "mount", and select OTG, if you are on Philz's, ignore that;
Make a simple wipe (wipe to factory reset----> data, cache, dalvik);
Then, flash the rom you have in the usb pen by otg cable.
Ok, once the flash ends, BEFORE REBOOT, DISCONNECT THE USB OTG CABLE, then reboot...
Try this way, if it doesn't work, tell me
So I am hoping someone can help me here.
I was attempting to install Cloudy G3 (1.3) on my phone and did the following things from stock 4.4.2.
1. Root using ioroot (Success)
2. Installed CWM semi touch recovery (somehow the chinese one got installed rather than english)
3. Used an app to boot me into recovery as the manual method was not working for me.
4. The chinese recovery opened up (to my surprise) and so after reading translations, i pressed restart.
5. Phone now stuck on LG screen with flashing LED.
Progress:
I have figured out that I can get to the chinese recovery by holding Power + Volume up for 5 seconds. Weird because I though you were meant to hold volume down??
I then tried flashing Cloudy G3 form my SD card by using the normal process
-Wipe cache,data,dalvik
-Install KK baseband zip
-Install Cloudy rom zip (Aroma setup works and I can go through and select all the things i want and the rom does install)
-reboot after finished installing
Now the phone boots with lg logo, goes black, goes to lg logo again and then goes into recovery all by itself without me touching volume buttons.
I am trying to go back to stock but the computer won't recognise my phone in download mode
my download mode just stays on this screen.
Needing help with this please!
Maybe there is a solution without using my comupter?
I will play around with uninstalling/ re-installing drivers this weekend.
I have tried a windows 7 and 8 PC.
I have the same problem from exactly the same process. Have you had any progress?
jenz25 said:
I have the same problem from exactly the same process. Have you had any progress?
Click to expand...
Click to collapse
solution 1 http://forum.xda-developers.com/showpost.php?p=54559526&postcount=1052
solution 2 (if twrp or cwm still exist) http://forum.xda-developers.com/showthread.php?t=2694530 download fx22.zip but you need change file inside that zip with file from solution 1, flash it and ur phone should be detected on download mode.
good luck
hyperionx7 said:
solution 1 http://forum.xda-developers.com/showpost.php?p=54559526&postcount=1052
solution 2 (if twrp or cwm still exist) http://forum.xda-developers.com/showthread.php?t=2694530 download fx22.zip but you need change file inside that zip with file from solution 1, flash it and ur phone should be detected on download mode.
good luck
Click to expand...
Click to collapse
Hi, thanks for your response. I have downloaded both files.I want to go with solution 2. However, I'm quite confused which file inside the zip on solution 2 I would need to replace with the file in solution one.
jenz25 said:
Hi, thanks for your response. I have downloaded both files.I want to go with solution 2. However, I'm quite confused which file inside the zip on solution 2 I would need to replace with the file in solution one.
Click to expand...
Click to collapse
just extract file from first one and rename it same like file from fx22.zip
replace content fx22.zip with that modified file with winrar or 7zip (just simple drag n drop)
put on usb flashdisk drive using usb OTG or adb sideload and flash it
Sorry, but the file from Solution 1 (zip file) contain the following:
cygwin1.dll
dd
mmcblk0p2_sbl1
mmcblk0p5_aboot
mmcblk0p6_rpm
mmcblk0p8_tz
mmcblk0p15_recovery
recover_partition
Which one should I transfer to the file on solution 2?
---------- Post added at 12:11 PM ---------- Previous post was at 11:52 AM ----------
OMG! It works now! Thanks Man! I would kiss you right now. )
pc does not recognize g2 in download mode
HI, i need help, I have Lg G2 D800. It is stuck in bootloop. It Hangs on LG logo screen with a blinking led. i can go to download mode but the pc just does not recognize the phone (drivers are installed)... if i connected and turn on the phone by normal way it gets stuck at lg logo but the pc recognize it, but if i connected in download mode does not recongnized! ( i need the pc recognized the g2 in download mode for using lg flash tool in orden to flash .tot stock firmware) any fix?? thanks
I have tried a windows 7 and 8 PC.
[email protected] said:
HI, i need help, I have Lg G2 D800. It is stuck in bootloop. It Hangs on LG logo screen with a blinking led. i can go to download mode but the pc just does not recognize the phone (drivers are installed)... if i connected and turn on the phone by normal way it gets stuck at lg logo but the pc recognize it, but if i connected in download mode does not recongnized! ( i need the pc recognized the g2 in download mode for using lg flash tool in orden to flash .tot stock firmware) any fix?? thanks
I have tried a windows 7 and 8 PC.
Click to expand...
Click to collapse
hi, did you solved your issue because i am in the same boat as you
hyperionx7 said:
solution 1 http://forum.xda-developers.com/showpost.php?p=54559526&postcount=1052
solution 2 (if twrp or cwm still exist) http://forum.xda-developers.com/showthread.php?t=2694530 download fx22.zip but you need change file inside that zip with file from solution 1, flash it and ur phone should be detected on download mode.
good luck
Click to expand...
Click to collapse
This seems promising, but how do I transfer it over to my LG?
Anyone know if there is root for ZTE Blade v6 Plus, thank you.
Anyone? I Tried kingroot didnt work
checho5123 said:
Anyone? I Tried kingroot didnt work
Click to expand...
Click to collapse
same here tried with several rooting apps still nothing
I get something
First activate the debbug usb and the bootloader, get a custom recovery (twrp for ZTE blade v7 lite), and flash with sp flash tool, activate the usb debbug and bootloader, then having the beta supersu install it since twrp. The files you use are the same as the ZTE BLADE V7 Lite as they have the same SOC MT6735 and andriod 6.0 ... look for them in google
I regret to say that the operation is successful but the device continues with the same stock recovery.
Try it and tell me if it works for you.
Zaidlion said:
First activate the debbug usb and the bootloader, get a custom recovery (twrp for ZTE blade v7 lite), and flash with sp flash tool, activate the usb debbug and bootloader, then having the beta supersu install it since twrp. The files you use are the same as the ZTE BLADE V7 Lite as they have the same SOC MT6735 and andriod 6.0 ... look for them in google
I regret to say that the operation is successful but the device continues with the same stock recovery.
Try it and tell me if it works for you.
Click to expand...
Click to collapse
but you were able to get rooted on account of this?
Smashhead85 said:
but you were able to get rooted on account of this?
Click to expand...
Click to collapse
I already did root zte blade v6 plus, the process is very simple only the most recent spflash tool is needed, that you have MTK drivers well installed, I have recovery and supersu v2.78. At first I put the stock recovery but I would flash it but just change pc and I went back to do the process and it worked.
I do not know, can I link here? Or how can I help you?
Zaidlion said:
I already did root zte blade v6 plus, the process is very simple only the most recent spflash tool is needed, that you have MTK drivers well installed, I have recovery and supersu v2.78. At first I put the stock recovery but I would flash it but just change pc and I went back to do the process and it worked.
I do not know, can I link here? Or how can I help you?
Click to expand...
Click to collapse
For sure a link or two would be appreciated...bcuz i have not been able to root my zte v6 plus
Smashhead85 said:
For sure a link or two would be appreciated...bcuz i have not been able to root my zte v6 plus
Click to expand...
Click to collapse
On some devices the root can not be installed, because they have blocked the flash but I am seeing how to modify this and so share it with you.
1.- activate usb debugging
2.-put the supersu file in the root of sd or internal memory
2.- install mtk DRIVERS on your pc
4.-Unzip the rar file on your desktop
3.-open spflashtool and select scatter-loading, load the file MT6735P_Android_scatter.txt
4.-turn off your device, and do not connect ...
5.-In spflashtool press the DOWNLOAD button, then connect your device and do not disconnect until a green thing appears ..
6.-When the green thing appears, disconnect the cable and press the UP VOLUME button + POWER button, you will see in the lower left a few letters that you say Recovery Mode, you have to appear the TWRP recovery, if you have the stock Recovery means that your device has write protection, but if it appears you proceed to install the supersu that is very easy you can check some video on YouTube how to install it using the TWRP.
Nota,: how do i pass the files???
Zaidlion said:
On some devices the root can not be installed, because they have blocked the flash but I am seeing how to modify this and so share it with you.
1.- activate usb debugging
2.-put the supersu file in the root of sd or internal memory
2.- install mtk DRIVERS on your pc
4.-Unzip the rar file on your desktop
3.-open spflashtool and select scatter-loading, load the file MT6735P_Android_scatter.txt
4.-turn off your device, and do not connect ...
5.-In spflashtool press the DOWNLOAD button, then connect your device and do not disconnect until a green thing appears ..
6.-When the green thing appears, disconnect the cable and press the UP VOLUME button + POWER button, you will see in the lower left a few letters that you say Recovery Mode, you have to appear the TWRP recovery, if you have the stock Recovery means that your device has write protection, but if it appears you proceed to install the supersu that is very easy you can check some video on YouTube how to install it using the TWRP.
Nota,: how do i pass the files???
Click to expand...
Click to collapse
thank you it was successful and i searched Youtube and everybody seems to be using this method although the videos are in spanish
also for those wishing to follow suit
splflashtool,scatter, recovery TWRP: http://*******/1iawZh
SuperSU.zip: http://*******/1iax2p
credits to Noomkrad or whoever they belong to
I accidentally wipe Dalvik/Art cache、System、Data and Cache through twrp recently.
Now, my phone shows no OS, so can not boot in system.
I can enter TWRP and fastboot and e-recovery, but I have tried to install UPDATE.zip, it always show error. I can install update_full_LON-L29_hw_spcseas.zip sucessfully though.
Is there anyway to fix my brick mate9 PRO>< PLZ help me
Another problem is that I cant install zip files through install(my phone doesnt have a sd card), the directory always shows encrypted text and wouldnt let me choose. I have tried few recoveries, including TWRP_3.2.1-0_OREO, Rayglobe_Recovery, and twrp-3.1.1-0-hi3660. Some of them cant getin recovery after flashing them, the rest shows encrypted text. Can anyone please save my brick phone?
TWRP doesn't work correctly, since the phone uses encryption.
I'd try downloading the Huawei Multi-tool, then download a full update through it, that fits your phone model. Then (assuming you have access to fastboot) flash the downloaded update through the Multi-tool program.
Basically this:
Huawei Multi-tool > find correct firmware with Huawei firmware finder (it's included in the program) > extract the different parts of the firmware needed, which is displayed on the the unbricking tap, and follow the rest of the instructions displayed there.
genehung2003 said:
I accidentally wipe Dalvik/Art cache、System、Data and Cache through twrp recently.
Now, my phone shows no OS, so can not boot in system.
I can enter TWRP and fastboot and e-recovery, but I have tried to install UPDATE.zip, it always show error. I can install update_full_LON-L29_hw_spcseas.zip sucessfully though.
Is there anyway to fix my brick mate9 PRO>< PLZ help me
Another problem is that I cant install zip files through install(my phone doesnt have a sd card), the directory always shows encrypted text and wouldnt let me choose. I have tried few recoveries, including TWRP_3.2.1-0_OREO, Rayglobe_Recovery, and twrp-3.1.1-0-hi3660. Some of them cant getin recovery after flashing them, the rest shows encrypted text. Can anyone please save my brick phone?
Click to expand...
Click to collapse
You can unbrick your device using firmware finder and eRecovery like I what I sayed in this post : http://forum.xda-developers.com/mate-9-pro/help/lon-l29-install-opengapps-frplock-t3892529/post78767873
Tuto :
1. Install Multi-tool 8
2. Choose the official firmware you want
3. Copy the Changelog.xml url by Right-clicking on it.
4. Activate the DNS with this firmware
5. Activate the Wifi sharing on your Windows 10 PC or laptop (By clicking on the Wifi icon at buttom-right of the screen and click on mobile hotspot)
6. Change the DNS of your PC in the Adaptater Option
7. Enter in E-Recovery and connect your phone on the Wifi of your PC
8. Download and Install it on your huawei Mate 9 Pro with this eRecovery