Related
Ok so here's my problem.
I have an I9505 previously with a GE custom ROM and modem version XXUEML2, everything was working fine so far, the only "strange" thing was whenever I reboot the device the Cell Network will take about 3 minutes to reconnect, and I constantly lost the 4g connection which I attributed to problems within my carrier.
So a couple days ago I re-installed my custom ROM (was having problems with the Kernel) and after it boot back I wait to my Cell Network to connect, which never happen. So I went ahead, format everything, re-install the custom ROM and no luck.
I tried everything, updating the Baseband to XXUEML6. Install the Stock ROM (which was locked, but the store where I get it unlocked it by warranty), install another Stock ROM (right now I have the I9505XXUFNC4_I9505PHNFNC1_PHN ROM) and I still cannot get signal).
Did my modem just died, or the "warranty" guys unlock my device in a wrong method. I don't think is a problem with my IMEI 'cause I still have the same as the dive box says.
Hope someone can guide me before I take it back. Thanks.
vicmns said:
Ok so here's my problem.
I have an I9505 previously with a GE custom ROM and modem version XXUEML2, everything was working fine so far, the only "strange" thing was whenever I reboot the device the Cell Network will take about 3 minutes to reconnect, and I constantly lost the 4g connection which I attributed to problems within my carrier.
So a couple days ago I re-installed my custom ROM (was having problems with the Kernel) and after it boot back I wait to my Cell Network to connect, which never happen. So I went ahead, format everything, re-install the custom ROM and no luck.
I tried everything, updating the Baseband to XXUEML6. Install the Stock ROM (which was locked, but the store where I get it unlocked it by warranty), install another Stock ROM (right now I have the I9505XXUFNC4_I9505PHNFNC1_PHN ROM) and I still cannot get signal).
Did my modem just died, or the "warranty" guys unlock my device in a wrong method. I don't think is a problem with my IMEI 'cause I still have the same as the dive box says.
Hope someone can guide me before I take it back. Thanks.
Click to expand...
Click to collapse
Hi .
I guess that you checked your setting , data is enable , network mode.....and if your APN settings were correct
MAX 404 said:
Hi .
I guess that you checked your setting , data is enable , network mode.....and if your APN settings were correct
Click to expand...
Click to collapse
Yeah, already check that, but the problem is that I cannot even make phone calls.
vicmns said:
Yeah, already check that, but the problem is that I cannot even make phone calls.
Click to expand...
Click to collapse
I am a little lost with the unlocking thing, why you had to unlock your phone ? it was from a different carrier ? once is unlocked it remains unlocked ..what method he used ?
MAX 404 said:
I am a little lost with the unlocking thing, why you had to unlock your phone ? it was from a different carrier ? once is unlocked it remains unlocked ..what method he used ?
Click to expand...
Click to collapse
Well, when I bought the device, it was intended to be unlocked, but for a strange reason my device (only mine 'cause we bought 2 the same day) came carrier locked (MEO from Portugal) So I sent it back to warranty. After a week I get my device back "unlocked" (Same ROM, IMEI) but I notice that it was rooted, which only makes me think that they take it to a third party which unlocked the cellphone with a method that required root. I didn't care, I had signal and 3G,
The problems of buying stuff online...
vicmns said:
Well, when I bought the device, it was intended to be unlocked, but for a strange reason my device (only mine 'cause we bought 2 the same day) came carrier locked (MEO from Portugal) So I sent it back to warranty. After a week I get my device back "unlocked" (Same ROM, IMEI) but I notice that it was rooted, which only makes me think that they take it to a third party which unlocked the cellphone with a method that required root. I didn't care, I had signal and 3G,
The problems of buying stuff online...
Click to expand...
Click to collapse
There use to be possible using this guide, with the old firmwares as far as i know is not possible anymore unless you still have that firmware
http://forum.xda-developers.com/showthread.php?t=2282683
The other way is by an unlocking code ( you can buy in many places) once is unlock , stays unlock..no matter what you flash
Try something go Settings/connections / More networks/Mobile networks/ network Operator/ choose your carrier and see if it let you register, try others and see what kind of message you get
MAX 404 said:
There use to be possible using this guide, with the old firmwares as far as i know is not possible anymore unless you still have that firmware
http://forum.xda-developers.com/showthread.php?t=2282683
The other way is by an unlocking code ( you can buy in many places) once is unlock , stays unlock..no matter what you flash
Try something go Settings/connections / More networks/Mobile networks/ network Operator/ choose your carrier and see if it let you register, try others and see what kind of message you get
Click to expand...
Click to collapse
Already tried to choose my carrier, but sometimes it doesn't even appear, and when it does, connecting to it just throws and error saying "Not Registered On Network".
What I fear is that somehow they unlocked it using the Ariza patch (or other unlock method) which should not be used.
Also after digging some info, that kind of error happens when the device have been IMEI locked, which could be also a possibility given that my SIM works on any other device, but not otherwise. I will have to give a call to support service to discard this theory.
vicmns said:
Already tried to choose my carrier, but sometimes it doesn't even appear, and when it does, connecting to it just throws and error saying "Not Registered On Network".
What I fear is that somehow they unlocked it using the Ariza patch (or other unlock method) which should not be used.
Also after digging some info, that kind of error happens when the device have been IMEI locked, which could be also a possibility given that my SIM works on any other device, but not otherwise. I will have to give a call to support service to discard this theory.
Click to expand...
Click to collapse
Hi ,
I also feel the same that is the problem , it has not been unlock right.
check with them , let me know what they tell you.
Ok, I have more information, typing on the dial *#0011# to get the Service Mode Menu, it says at the bottom IMEI CERTI: NA. But if y dial *#06# I get my correct IMEI, is something wrong with the EFS folder?
vicmns said:
Ok, I have more information, typing on the dial *#0011# to get the Service Mode Menu, it says at the bottom IMEI CERTI: NA. But if y dial *#06# I get my correct IMEI, is something wrong with the EFS folder?
Click to expand...
Click to collapse
Hi ,
Just cheked mine , it said PASS
For sure something happen when unblocking the phone
Hello, first of all I want to let you know that I am not an expert but have so far been able to convert my Axon A2017 to the US A2017U version.
Big thanks [email protected] for supplying the necessary files.
I have:
-unlocked the bootloader
-rooted the phone
-flashed successfully B20
However, When I upgraded to B29, I lost TWRP and the cell radio of the phone is non-responsive. It won't even turn on. Bootloader is sill unlocked. I made phone calls on my T-mobile network when it was the origional A2017 B8 version. So I believe the bandwidths are compatible.
I have already done the following troubleshooting: (note: WIFI currently works just fine)
-My network is with T-Mobile, and I have been using a different axon A2017U for over a year with no problems.
-When I type *#*#4636#*#* and got to phone Info says, GSM Service: Radio Off, and the Turn on Radio button does nothing.
- I have tried working with every setting in this menu with no luck.
-When I insert my SIM card that is working on my current axon 7 into the converted A2017U, it is able to pick up T-Mobile network u.s. LTE, (fast.tmobile.com) and T-Mobile US (tmus). However, there are no bars because the radio is not turned on.
-When I try to search for new networks an error message saying, "network search cannot proceed when the data service is enabled disabled it?" So I disable it and nothing happens except for an error message saying "error while searching for Networks".
-In network mode I have switched to every option available, LTE/wcdma/GSM, wcdma/GSM, and GSM only with no result.
I am currently running Android version 6.0.1 on build B-29. Any help to get the radio up and running to receive phone calls would be greatly appreciated. Everything else is working except for the phone radio to send and receive phone calls.
Thanks for any Help.
Do you still have your IMEI or did the partition get corrupted?
ultramag69 said:
Do you still have your IMEI or did the partition get corrupted?
Click to expand...
Click to collapse
I check the number with several online checks, as well as T-Mobile, and they are unable to bring up any information about the number. I imagine it got blocked or corrupted during the upgrades.
What do I do to unblock it or make it functional again?
Go to settings>About>Status and check your IMEI number. If it's blank its noyt gonna work on any network...
You might be able to restore it if you have a backup of it - no-one will give you their backup as you then have their phone - or as a last resort, you might need to restore to the stock Chinese Rom again and see if that fixes it...
Good luck, I'm off to bed after a long backshift...
ultramag69 said:
Go to settings>About>Status and check your IMEI number. If it's blank its noyt gonna work on any network...
You might be able to restore it if you have a backup of it - no-one will give you their backup as you then have their phone - or as a last resort, you might need to restore to the stock Chinese Rom again and see if that fixes it...
Good luck, I'm off to bed after a long backshift...
Click to expand...
Click to collapse
Thankfully the numbers are there on both IMEI slot 1 and IMEI Slot 2. Thanks for your help. I hope to hear from you after a good night of rest.
Flash the correct modem/bootstack for your device.
Shipcaptian said:
Thankfully the numbers are there on both IMEI slot 1 and IMEI Slot 2. Thanks for your help. I hope to hear from you after a good night of rest.
Click to expand...
Click to collapse
Just go to the LineageOS thread and download the A2017 modem file, then just flash it
Choose an username... said:
Just go to the LineageOS thread and download the A2017 modem file, then just flash it
Click to expand...
Click to collapse
Sounds Good
Will I need TWRP to flash it or can is just use the Reg. recovery system?
Shipcaptian said:
Sounds Good
Will I need TWRP to flash it or can is just use the Reg. recovery system?
Click to expand...
Click to collapse
You need TWRP. Just install it with axon7tool via edl if you don't have fastboot, or try axon7toolkit
Choose an username... said:
You need TWRP. Just install it with axon7tool via edl if you don't have fastboot, or try axon7toolkit
Click to expand...
Click to collapse
Here's the latest update:
I loaded TWRP onto the phone and installed the file A2017U_N_Modem.zip. (Several Times)
nothing has changed. The radio is still turned off and no signal is being picked up from my carrier T-Mobile.
While loading it says: Loading A2017U_N_Modem for nougat system. I am not running nougat and I cannot find any other modem to download. Will that make a difference?
Any other suggestions are welcome?
Shipcaptian said:
Here's the latest update:
I loaded TWRP onto the phone and installed the file A2017U_N_Modem.zip. (Several Times)
nothing has changed. The radio is still turned off and no signal is being picked up from my carrier T-Mobile.
While loading it says: Loading A2017U_N_Modem for nougat system. I am not running nougat and I cannot find any other modem to download. Will that make a difference?
Any other suggestions are welcome?
Click to expand...
Click to collapse
You need to flash the A2017 modem, not the A2017U one
Here: https://www.androidfilehost.com/?fid=457095661767137840
bkores said:
You need to flash the A2017 modem, not the A2017U one
Here: https://www.androidfilehost.com/?fid=457095661767137840
Click to expand...
Click to collapse
Okay it works! I've got signal but when I try to make a phone call and my other phone picks up I can't hear or say anything. Any idea what's happening? I have tried refreshing the signal with no luck.
Hey man, I'm having the same problem with my Axon 7, brand new A2017U. Turned it on for the first time and I haven't had an ounce of radio on. Same things you've tried I've tried and it refuses to work. Mine is not rooted and I don't want to. I've tried downgrading my update and to no avail. Factory reset etc. I've contacted ZTE and they said they have forwarded my details and my phone details, storage size, color etc. To the necessary representatives. I think I'm gonna be sent a replacement, but just wanted to let you know your not alone.
I just got an LS997 V20 and so far I'm really liking it.
However, since I'm using it in the UK, I needed to network unlock it. after doing this, I hoped that I could use my simcard, however (as you can see in the added image) it still shows a simcard error. the simcard works, however since in my other phone its being recognised.
I think I read somewhere that the sprint ROM blocks simcards that aren't Sprint. I tried to unlock the bootloader and fastboot, but haven't been able since I accidentally installed the latest updates. is there any solution available or so that can fix it without needing root or the bootloader unlocked? I really want to use this V20 as a phone and not as just a camera and mp3 player
Is there any way to fix it?
katsuowota said:
I just got an LS997 V20 and so far I'm really liking it.
However, since I'm using it in the UK, I needed to network unlock it. after doing this, I hoped that I could use my simcard, however (as you can see in the added image) it still shows a simcard error. the simcard works, however since in my other phone its being recognised.
I think I read somewhere that the sprint ROM blocks simcards that aren't Sprint. I tried to unlock the bootloader and fastboot, but haven't been able since I accidentally installed the latest updates. is there any solution available or so that can fix it without needing root or the bootloader unlocked? I really want to use this V20 as a phone and not as just a camera and mp3 player
Is there any way to fix it?
Click to expand...
Click to collapse
If you have updated your phone to August OTA. Then you will be left with no other option than to purchase a sim unlock.
datrmon said:
If you have updated your phone to August OTA. Then you will be left with no other option than to purchase a sim unlock.
Click to expand...
Click to collapse
I already bought a network unlock that went via an app. I bought it from lgsimunlock.com . Any other ideas? I'm not even sure if that network unlock worked...
katsuowota said:
I already bought a network unlock that went via an app. I bought it from lgsimunlock.com . Any other ideas? I'm not even sure if that network unlocks worked...
Click to expand...
Click to collapse
I'm in the same shoes as you..Got my phone updated till August bought a remote unlock but didn't work.
I don't know whether phone unlocks no longer works on LG LS997.
Has antoje found a solution to this? I also have the same issue
DISCLAMER: I AM NOT A DEVOLPER AND MAY NOT BE ABLE TO HELP YOU ON YOU DEVICE. UNSUCCESSFUL ATTEMPTS TO FLASH FIRMWARE ON THIS DEVICE CAN AND WILL BRICK YOUR PHONE. BACK UP EVERYTHING IN EVRY CONCIEVABLE WAY.
After days of trying to do this with all the outdated guides and miscommunications and edits in post i decided to try and make a streamlined guide to help others.
NOTE: If your are looking for anything else other than a stock bloat free unlocked firmware then look elsewhere.
Also if you are using rev 1 booloader then this will ireversablly upgrade you to rev 2 bootloader not a real problem just a note
Download 3B's patched Odin 3.13 https://drive.google.com/file/d/17wH1YHcGsOCxbDGYDoy9VlnqO_Xi6IOm/view?usp=drivesdk
Download samfirm.exe
https://drive.google.com/file/d/1XdboeTqk8pSZyJQVt-IHVHFfznJ9eOQk/view?usp=drivesdk
Thanks to @zxz0O0
If you can't find your own drivers don't do this
1. Extract B3 Odin
2. Extract and run samfirm.exe
3. Make sure auto is checked use SM-G955u1 as model number and XAA as country code then search. It should find you the absolute latest firmware
Hit download and choose file destination. This can take a while.
4. extract firmware.zip
5. Run 3B's Odin and add file to there respective locations. I.e. Ap file in Ap slot etc. Use the non home CDC
6. The only thing you need ticked in Odin are already set by default
7. Boot phone into download mode power+bixby+volume down while the device is off
8. Read the screen that pops up very carefully and decide to continue at you own risk by pressing volume up
9. Connect phone via USB 2.0 port do not use a USB 3.0 port it will not work
Make sure Odin recognizes device if it doesn't then u have a driver issue
10. Press start and wait patiently
11. Phone will reboot it self setup device and insert sim card. You will probably get a notification say phone not allowed a quick call to the service provider you trying to use is all that's in order here
12. Enjoy your carrier unlocked stock SM-G955u1 on your preferred network
I AM NOT RESPOSIBLE FOR ANYTHING YOU DO TO YOUR OWN DEVICE YOU WERE WARNED.
So this gets rid of all bloatware?
From my knowledge, Verizon does not, and has not ever carrier locked their phones. Seems like a lot of trouble just to debloat.. Am I missing something here?
Any idea why it stucks at "SetupConnection.."
This worked GREAT! My Verizon S8+was working fine on AT&T before I did this, but I was stuck on Android 7.0. So thank you so much for this. There's only one thing that bothers me is in my drop down menu there's a notification that says "Sprint OMADM Checking Device Status." Which really isn't a big deal, it's just annoying. Another thing I worry about is, i'm using it on a GSM network, is it actively searching for a CDMA network at the same time and draining my battery? Any input would be appreciated, and thank you again!
I have a verizon s8 plus does this still work please confirm???
xghostyxjokerx said:
I have a verizon s8 plus does this still work please confirm???
Click to expand...
Click to collapse
The method will be similar just need the proper firmwares for your device
This being quite an old post I was wondering ...
I am currently on G950USQS5CSB1 with CSC XAS/XAA/VZW.
Currently I have no carrier bloat (good), I am on Mint with no issues (good) and I get prompt OTA's I assume for carrier VZW but I lack wifi calling which I would like (bad).
I have downloaded G950U1UES5CSB2 for G950U1
Will this work using the 3B modded Odin as described without having to flash the combination files?
normal and Prince Comsy Odin both failed.
Thanks
edit: Took the dive .... worked great thanks, now on G950U1 and have wifi calling and VoLTE
This is great, minus one thing, it installed facebook on my phone, which I didn't have before and never wanted and it won't let me uninstall it..
I'm hoping you are still monitoring this old thread. I have a Verizon Galaxy S8 and followed your instructions exactly (except that I downloaded the files for SM-G950U1 (my current model is SM-G950U). When I start Odin, it gets stuck at "SetupConnection" and never goes any further. Thoughts?
pakkergirl said:
I'm hoping you are still monitoring this old thread. I have a Verizon Galaxy S8 and followed your instructions exactly (except that I downloaded the files for SM-G950U1 (my current model is SM-G950U). When I start Odin, it gets stuck at "SetupConnection" and never goes any further. Thoughts?
Click to expand...
Click to collapse
Did you by chance boot download mode?
Will this work if I have a v5 bootloader?
kukumaka said:
Will this work if I have a v5 bootloader?
Click to expand...
Click to collapse
Yea. I just switched to Verizon. You should be able to just pop your sim in and it automatically carrier switch. Most of these are multi carrier
But yea I don't know about the firmware program he's offering never used it I get mi e from sammobile.com or update.com
Hi, I flashed this rom in my verizon S8+ SM-g955u1, but after that the phone is having the no signal issue. Imei is still there, how to fix this?
fagnerkof said:
Hi, I flashed this rom in my verizon S8+ SM-g955u1, but after that the phone is having the no signal issue. Imei is still there, how to fix this?
Click to expand...
Click to collapse
Is it unlocked
TheMadScientist said:
Is it unlocked
Click to expand...
Click to collapse
Yes, it has unlocked as it recognizes my sim card and carrier. But no signal. I think the problem is the device is with "MIPI device fail" status
fagnerkof said:
Yes, it has unlocked as it recognizes my sim card and carrier. But no signal. I think the problem is the device is with "MIPI device fail" status
Click to expand...
Click to collapse
Never saw that one before. But theres a few fixes supposedly
http://forum.gsmhosting.com/vbb/f453/mipi-device-fail-final-solution-2429954/
You'll have to root and do a nv rebuild it looks like
Need access to hidden menus
TheMadScientist said:
Never saw that one before. But theres a few fixes supposedly
http://forum.gsmhosting.com/vbb/f453/mipi-device-fail-final-solution-2429954/
You'll have to root and do a nv rebuild it looks like
Need access to hidden menus
Click to expand...
Click to collapse
I tried nv rebuild via menu *#27663368378#. I'm not sure if i can root due I'm on bl7
fagnerkof said:
I tried nv rebuild via menu *#27663368378#. I'm not sure if i can root due I'm on bl7
Click to expand...
Click to collapse
Yea not yet. I'm also on 7. We need edl files first. I got the combination rom for the boot img but edl is still missing. I got a few guys looking for it. I typed in the error you gave me and saw a few sites with no box fixes. Normally if you can get to the menu I don't see root being needed. But I may ne wrong since I've never seen this error
This would be great if it worked. However I have my doubts. You would first need to have the phone be from Verizon or be on another carrier and *unlocked* first before changing any CSC using the US OPEN firmware which allows you to simply put a sim card in and switch carriers by swapping sims and letting Samsung reconfigure the phone. The BEST setup is a SPRINT phone.. unlocked.. then converting to U / U1 firmware. You then have every possibility when it comes to carriers sitting at your finger tips!
Good Luck
noidodroid said:
This would be great if it worked. However I have my doubts. You would first need to have the phone be from Verizon or be on another carrier and *unlocked* first before changing any CSC using the US OPEN firmware which allows you to simply put a sim card in and switch carriers by swapping sims and letting Samsung reconfigure the phone. The BEST setup is a SPRINT phone.. unlocked.. then converting to U / U1 firmware. You then have every possibility when it comes to carriers sitting at your finger tips!
Good Luck
Click to expand...
Click to collapse
Your post dont even make sense. The Verizon s8 at the time came sim unlocked. All you had to do was swap the csc. But worked unlocked out of the box. Why would a sprint device be the best setup. All the us s8s are identical. Sounds like you come from LG which is true on devices and versatility. Not Samsung.
Hi. I recently bought the LG V35 supposedly unlocked; however, I am unable to activate on T-Mobile.
Backstory: After purchasing the V35, I followed the instructions on cross flashing to get rid of the AT&T bloat here https://forum.xda-developers.com/lg-v35/development/bootloader-unlock-root-instruction-t4052145. The firmware I downloaded was from https://lg-firmwares.com/lg-lmv350ulm-firmwares/; however, the AIO and the USA versions are both the same. I flashed one of the firmware and all is fine, except now I get "Network locked" after I insert my SIM card from T-Mobile. I went AT&T's site https://www.att.com/deviceunlock/#/https://www.att.com/deviceunlock/#/ for an unlock code; however, I do not get a prompt on my phone to enter the code. This is after I flashed the phone.
My questions are, which version of the firmware was I to use so my phone is network unlocked AIO or USA? If they are both the same, how do I get the phone to be network unlocked so I can activate the V35 to T-Mobile.
TIA
boricua65 said:
Hi. I recently bought the LG V35 supposedly unlocked; however, I am unable to activate on T-Mobile.
Backstory: After purchasing the V35, I followed the instructions on cross flashing to get rid of the AT&T bloat here https://forum.xda-developers.com/lg-v35/development/bootloader-unlock-root-instruction-t4052145. The firmware I downloaded was from https://lg-firmwares.com/lg-lmv350ulm-firmwares/; however, the AIO and the USA versions are both the same. I flashed one of the firmware and all is fine, except now I get "Network locked" after I insert my SIM card from T-Mobile. I went AT&T's site https://www.att.com/deviceunlock/#/[url]https://www.att.com/deviceunlock/#/[/url] for an unlock code; however, I do not get a prompt on my phone to enter the code. This is after I flashed the phone.
My questions are, which version of the firmware was I to use so my phone is network unlocked AIO or USA? If they are both the same, how do I get the phone to be network unlocked so I can activate the V35 to T-Mobile.
TIA
Click to expand...
Click to collapse
You need to be on AT&T firmware to use the carrier unlock code. If you cross flash to different firmware before carrier unlocking you are out of luck. EDIT: see posts below where new information has emerged.
Obviously your V35 was not carrier unlocked/SIM card unlocked, in spite of what the seller said?
Unlike with the LG V30 series, flashing carrier unlocked firmware does NOT carrier unlock AT&T LG V35. You need to use carrier unlock code prior to cross flashing different variant firmware.
Perhaps you can contact someone with Octoplus box and get back to AT&T firmware to use carrier unlock code. AT&T doesn't publicly release KDZ for their firmware, but some dealers with Medusa and Octoplus boxes still somehow have it.
boricua65 said:
Hi. I recently bought the LG V35 supposedly unlocked; however, I am unable to activate on T-Mobile.
Backstory: After purchasing the V35, I followed the instructions on cross flashing to get rid of the AT&T bloat here https://forum.xda-developers.com/lg-v35/development/bootloader-unlock-root-instruction-t4052145. The firmware I downloaded was from https://lg-firmwares.com/lg-lmv350ulm-firmwares/; however, the AIO and the USA versions are both the same. I flashed one of the firmware and all is fine, except now I get "Network locked" after I insert my SIM card from T-Mobile. I went AT&T's site https://www.att.com/deviceunlock/#/https://www.att.com/deviceunlock/#/ for an unlock code; however, I do not get a prompt on my phone to enter the code. This is after I flashed the phone.
My questions are, which version of the firmware was I to use so my phone is network unlocked AIO or USA? If they are both the same, how do I get the phone to be network unlocked so I can activate the V35 to T-Mobile.
TIA
Click to expand...
Click to collapse
My understanding is that if you flash the firmware for south america, when you boot it with your sim card, a pop up will appear asking for an unlock code. Haven't done it myself but it sounds like in your situation it wouldn't hurt to try...
Of course, if u don't get a pop up, try the code that supposedly brings up pop up to enter code.
follow this link for the MIA version that should work.
cheers, let us know if you try it the results.
Thread Cleaned and it will end here regarding this back and forth, take care.
Hi OP, use LGUP to flash Mexican region kdz, insert your T-Mobile sim and unlock window will pop-up upon reboot and you can use the unlock code to unlock your phone. Good luck.
Android# said:
Hi OP, use LGUP to flash Mexican region kdz, insert your T-Mobile sim and unlock window will pop-up upon reboot and you can use the unlock code to unlock your phone. Good luck.
Click to expand...
Click to collapse
Is this guaranteed to work? I really want to use this phone.
boricua65 said:
Is this guaranteed to work? I really want to use this phone.
Click to expand...
Click to collapse
Guaranteed? Well, as stated by those mentioning it here, I don't think we've actually done it, only repeating that others say it will work. So again, guaranteed? I couldn't guarantee it, but it seems unlikely that people would say it does work, and be lying about it?
Here's a GDrive link to the kdz you'd want to flash to try it. It's the latest Oreo for the south american region. Aside from using LGUP to flash it, you'd need an unlock code.
The md5 sum from this LG Page should match, to verify legitimacy.
Let us know if it works.
AsItLies said:
Guaranteed? Well, as stated by those mentioning it here, I don't think we've actually done it, only repeating that others say it will work. So again, guaranteed? I couldn't guarantee it, but it seems unlikely that people would say it does work, and be lying about it?
Here's a GDrive link to the kdz you'd want to flash to try it. It's the latest Oreo for the south american region. Aside from using LGUP to flash it, you'd need an unlock code.
The md5 sum from this LG Page should match, to verify legitimacy.
Let us know if it works.
Click to expand...
Click to collapse
So I just flashed my phone from the link you provided and no dice. I reflashed, factory reset, insert the SIM card after completing set up, insert SIM card after factory reset the second time, etc. with no luck. I am not getting a pop to ask for the unlock code.
EDIT to add: So I found a set of instructions when I don't get a pop up asking for the network unlock code (below)
Second option (device doesn't ask for an unlock code with an unaccepted SIM)
1. Start the device with an accepted simcard (example LG V35 ThinQ was bought in Orange you need to insert an Orange card)
2. Go to the dial screen and press “2945#*model number#” (the same way you enter a phone number)
Example: the device is a P999 you need to enter “2945#*999#” or for KU990 you need to enter “2945#*990#” etc…
So far I am getting closer. Now I get a message saying SIM not provisioned. I will continue to research and troubleshoot. If I continue to run into a another roadblock, I will post here. Thank you all.
Okay, now I fracked up something else. I went from V350EM10h_OPEN_SCA_OP_118.kdz to V350ULM20f_00_NAO_US_
Okay now I am stuck at the LG Life's Good splash screen. I went back to LGUP and did not see it was defaulted to Refurbish going from V350EM10h_00_OPEN_SCA_OP_0118.kdz to V350ULM20f_00_NAO_US_OP_0218.kdz. I went back and reran LGUP with Upgrade chosen; however, the phone is still stuck at the splash screen. Help!
EDITED
boricua65 said:
Okay now I am stuck at the LG Life's Good splash screen. I went back to LGUP and did not see it was defaulted to Refurbish going from V350EM10h_00_OPEN_SCA_OP_0118.kdz to V350ULM20f_00_NAO_US_OP_0218.kdz. I went back and reran LGUP with Upgrade chosen; however, the phone is still stuck at the splash screen. Help!
Click to expand...
Click to collapse
So you've tired to reflash ulm and have an issue there. But did you get it sim unlocked?
here's also some instructions I found re unlocking sim if you don't get a pop-up
UNLOCK LG UNLOCK INSTRUCTIONS
ONCE YOU HAVE RECEIVED THE UNLOCK CODE EMAIL, PLEASE FOLLOW THE FOLLOWING INSTRUCTIONS CAREFULLY.
1) Insert a SIM card that is not from the original carrier in your phone and power on the phone.
2) Once finished loading your phone will ask you for the "SIM Network Unlock PIN".
If your phone does not prompt for a code, please dial 2945#* [model number] # to bring up the prompt
For example LG G4 D851: Dial 2945#*851#
3) Enter the LG Network Unlock Code.
If your phone asks for the "SIM network unlock PIN", use the NCK code.
If your phone asks for the "SIM Service Provider unlock PIN", use the SPCK code.
---------------------
But now you have an additional issue, you say you used 'refurbish' mode for both flashings? To the S.A. one and then back to the ulm one?
To my understanding, that should have worked. But whatever the case may have been, you're stuck now, from what I understand. If that's the case, all I can suggest is trying 'DL' mode for the ULM and select all partitions, OR maybe try 'Upgrade' (if you did refurbish" or refurbish if you did the other.
Sorry to hear you're having trouble, I guess, if you followed the procedure and it didn't work, then this is an indication there IS NOT a way to unlock the sim if you failed to do it on ATT OS.
Let us know if you're able to make any progress / got it sim unlocked or not. We'll have to start relaying the results so others don't have the same issue.
AsItLies said:
So you've tired to reflash ulm and have an issue there. But did you get it sim unlocked?
here's also some instructions I found re unlocking sim if you don't get a pop-up
UNLOCK LG UNLOCK INSTRUCTIONS
ONCE YOU HAVE RECEIVED THE UNLOCK CODE EMAIL, PLEASE FOLLOW THE FOLLOWING INSTRUCTIONS CAREFULLY.
1) Insert a SIM card that is not from the original carrier in your phone and power on the phone.
2) Once finished loading your phone will ask you for the "SIM Network Unlock PIN".
If your phone does not prompt for a code, please dial 2945#* [model number] # to bring up the prompt
For example LG G4 D851: Dial 2945#*851#
3) Enter the LG Network Unlock Code.
If your phone asks for the "SIM network unlock PIN", use the NCK code.
If your phone asks for the "SIM Service Provider unlock PIN", use the SPCK code.
---------------------
But now you have an additional issue, you say you used 'refurbish' mode for both flashings? To the S.A. one and then back to the ulm one?
To my understanding, that should have worked. But whatever the case may have been, you're stuck now, from what I understand. If that's the case, all I can suggest is trying 'DL' mode for the ULM and select all partitions, OR maybe try 'Upgrade' (if you did refurbish" or refurbish if you did the other.
Sorry to hear you're having trouble, I guess, if you followed the procedure and it didn't work, then this is an indication there IS NOT a way to unlock the sim if you failed to do it on ATT OS.
Let us know if you're able to make any progress / got it sim unlocked or not. We'll have to start relaying the results so others don't have the same issue.
Click to expand...
Click to collapse
Actually, I was able to get the phone to be network unlocked. I mistakenly went from S.A. version to NAO as Refurbished instead of Upgrade on the LGUP.
boricua65 said:
Actually, I was able to get the phone to be network unlocked. I mistakenly went from S.A. version to NAO as Refurbished instead of Upgrade on the LGUP.
Click to expand...
Click to collapse
So you're all set now? sim unlocked and back on ULM? If that's so, that's good news.
AsItLies said:
So you're all set now? sim unlocked and back on ULM? If that's so, that's good news.
Click to expand...
Click to collapse
Only the phone is network unlocked. It's still stuck at the LG logo screen and does not boot up.
boricua65 said:
Only the phone is network unlocked. It's still stuck at the LG logo screen and does not boot up.
Click to expand...
Click to collapse
Well that's not good. I can only suggest try doing a partition D/L? I don't know if that would help or not, but not sure it could be worse than it is now? Certainly don't try the other options like chip erase etc. Those are not for a situation like this, they will certainly make things worse!
boricua65 said:
Hi. I recently bought the LG V35 supposedly unlocked; however, I am unable to activate on T-Mobile.
Backstory: After purchasing the V35, I followed the instructions on cross flashing to get rid of the AT&T bloat here https://forum.xda-developers.com/lg-v35/development/bootloader-unlock-root-instruction-t4052145. The firmware I downloaded was from https://lg-firmwares.com/lg-lmv350ulm-firmwares/; however, the AIO and the USA versions are both the same. I flashed one of the firmware and all is fine, except now I get "Network locked" after I insert my SIM card from T-Mobile. I went AT&T's site https://www.att.com/deviceunlock/#/https://www.att.com/deviceunlock/#/ for an unlock code; however, I do not get a prompt on my phone to enter the code. This is after I flashed the phone.
My questions are, which version of the firmware was I to use so my phone is network unlocked AIO or USA? If they are both the same, how do I get the phone to be network unlocked so I can activate the V35 to T-Mobile.
TIA
Click to expand...
Click to collapse
Sorry to tell you this but you can't network unlock after flashing. You should have researched that if you're modifying the phone
Vuzeultra said:
Sorry to tell you this but you can't network unlock after flashing. You should have researched that if you're modifying the phone
Click to expand...
Click to collapse
You did not ready the whole thread. I was able to network unlock my device after using a South American firmware. In my haste, I used LGUP and flashed the NAO firmware as a Refurbish instead as Upgrade.
AsItLies said:
Well that's not good. I can only suggest try doing a partition D/L? I don't know if that would help or not, but not sure it could be worse than it is now? Certainly don't try the other options like chip erase etc. Those are not for a situation like this, they will certainly make things worse!
Click to expand...
Click to collapse
With much trepidation, I did the Partition D/L and it work!!! :good::good::good: I got my phone back.
boricua65 said:
With much trepidation, I did the Partition D/L and it work!!! :good::good::good: I got my phone back.
Click to expand...
Click to collapse
Awesome, good job.