Related
Is there anything which will let me return to windows mobile after I install android on my HTD HD2?
Basically I want a dual booting option so I can still use Windows Mobile - as I have just realised, just before install Android, that it is acutally quite useful. ???
Take out your SD card. Boot up. And place your card back in. Toodles.
Android cannot be "installed" yet. When you have android on your sdcard it will still boot windows first, then it gives you the option to boot android.
Some windows mobile roms ie. Chuckyrom, have a built in android loader, so that every time you boot you can choose which os to use.
Thanks
Thanks for the help - That must have sounded like a noob question - I am new to the whole putting android on the HD2 thing.
Thanks.
Hello
I have a Omnia 2
I installed Froyo 2.2 on the external SD with the dual boot start up. The dual boot is set with Android as default. Everything works ok except for when I switch on the phone it loads a little bit in windows and then to android. Meanwhile until android loads if I get any messages it goes to the windows version :S
The problem is the windows version no longer works as I want it to (I think it got offended) so I can’t really see the messages.
Question: How can I set my phone to load ONLY and directly to Android? So there will be no need of the dual boot and no need to load a bit of windows.
Thank you.
I'm using it exactly as you and I think it's not possiblle.
Dual boot as u expect is not possible, b'coz our Android is not a NAND ROM.
The phone will first boot to Windows Mobile and then the dual boot application will run the Haret file to launch Android.
1. Download Android Nougat 7.0 ISO file[Developed by Android x86].
2. Download Rufus win App to Create Bootable/Live USB.
3. Insert USB with Minimum 4GB and select Downloaded ISO file and finally start.
4. After Finishing, Create New/ Separate Partition in PC for Android to be Installed with Minimum of 16GB Disk Size and Format it as FAT32.
5. After formatting, Reboot PC.
6. Boot PC from USB.
7. Select Install android x86 to HDD.
8. Now In bluescreen Select the Separate Fat32 formatted Partition to Install.
9. Do not Format.( I didn't formatted and it works fine).
10. Install Boot Loader GRUB.( It will replaces default Windows Bootloader).
12. Next it shows up that your are having Windows Partition and asked to create boot item for windows. Select Yes for that else you won't be able to boot into Windows next time.
13. Next Select Skip for EFI GRUB2.(I Skipped and worked for me, I think because I'm having Legacy PC).
14. Then Select Yes to Create Read/Write enabled system directory.
15. Now To create data.img, select yes and then Enter the Size you need for System Memory in MBs (1GB-1024MB).
16. Now Accept Reboot and then Boot Android from GRUB Menu.
17. Thats all . You have Successfully installed Android 7.0 nougat in your PC HDD.
Also I Made Video Tutorial in YouTube for Better Understanding. You can Checkout if you don't understand or if any error pops.
https://www.youtube.com/watch?v=o90aPj4zT-M(TechGeekShan).
Follow Me
http://facebook.com/techgeekshan
http://twitter.com/techgeekshan
https://www.reddit.com/r/TechGeekShan/
http://instagram.com/techgeekshan/
http://www.techgeekshan.in/
Wow thanx mate, will give it a try and will give a feed back.
Sent from my SM-G935F using XDA-Developers mobile app
silverrum said:
Wow thanx mate, will give it a try and will give a feed back.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Yeah.. You are welcome and we must Appreciate the Developer who developed Android Nougat x86..
Don't work for me((( Laptop wan't boot after installation...
gmikes said:
Don't work for me((( Laptop wan't boot after installation...
Click to expand...
Click to collapse
Its because of EFI/UEFI Computers
Why not work
Shanmukarajan said:
Its because of EFI/UEFI Computers
Click to expand...
Click to collapse
Why not Work ?
If I install it on my PC, do I access google play store like normal?
successfully installed on Z3735F Bay Trail-T windows 10 tablet. I don't need windows 10 OS anymore, so made one partition and install Android 7. It books OK, WIFI works fine. BUT!!!!! All the physical buttons don't work. Power button doesn't work, so there is no way to turn off the system. Volume Up and Down button also doesn''t work. But touch screen works fine. How to solve this problem? any idea? My tablet is Unbranded Tablet 10.1 from Best Buy
hey,
i got it up & running on my uefi windows 10 lenovo yoga (after some struggle i also have dual-boot). my question - how do i get gapps and supersu? it's not like you could simply flash some zips, as there is no recovery
No Playstore!! Browser does not download files!!!
So after wasting 400mb of data and roughly 30 minutes of my time, I discover that there is no preinstalled PlayStore, the preinstalled browser will not download APKs and trying to install apps from the online MarketPlace only discovers devises that the email used to Sign In with is associated to, not the device this is installed on.
These things SHOULD by all ethical means be stated in the description to prevent others from wasting both their time as well as their data.
I want to see a solution to these problems Shanmukarajan. Should you decide to neglect this issue, I won't hesitate to have this post reported to the moderators.
Thank you in advance for your prompt support on the matter.
Stevo | True.Tech.Tabs
+1 360 **** ***
there is just one issue.
you can not create a data.img file that is larger than 4GB on a fat32 partition...
how do we fix that?
It’s installs fine but when restarts windows is just starting every time and it’s not coming up with step 12 asking me about windows partition and creating boot item
I performed the installation process about 10 times with different settings but none of them seem to install Android on my HDD. The live version works and there are no errors whatsoever, but even after installation there is never an option to boot the installed Android. Only live, debug or again option to install the OS. Does anyone know the solution?
Sent from my Xperia X Compact using XDA Labs
Godecki said:
I performed the installation process about 10 times with different settings but none of them seem to install Android on my HDD. The live version works and there are no errors whatsoever, but even after installation there is never an option to boot the installed Android. Only live, debug or again option to install the OS. Does anyone know the solution?
Sent from my Xperia X Compact using XDA Labs
Click to expand...
Click to collapse
Have you tried selecting yes to GRUB 2 during installation? It's been a little while since I went through the process, but I believe that was what I had to do to get it up and running.
Godecki said:
I performed the installation process about 10 times with different settings but none of them seem to install Android on my HDD. The live version works and there are no errors whatsoever, but even after installation there is never an option to boot the installed Android. Only live, debug or again option to install the OS. Does anyone know the solution?
Click to expand...
Click to collapse
Yeah I have the same issue with my Sony VAIO Duo 11. To start from power off I have to hit the special Duo Assist button, then F11 to boot from usb, then go thru the (re) install every time, so boot takes a couple of minutes, but it always bring me back to the same great working Android with all apps and setting unchanged. I don't understand, but I just happened onto it. Be sure to not format or install any grub (not really sure about grub or grub2), but yes to make it writeable. Then you get an awesomely fast Android.
I don't even want Windows on that machine, but I'm afraid to kill all the partitions and start from scratch as the Duo has some weird builtin Windows boot stuff hard wired. I'm not sure if Android could boot without the Windows partitions.
When I am creating a new partition with 16 GB of space does it mean that Android is going to use just this partition and 16 GB or is it just for the installation files and Android will see my whole HDD as the internal storage?
Could you please let me know how you got it up and running? I am on a UEFI yoga as well, but after the installation,
grub doesn't show up and my computer boots automatically into Windows
Thanks in advance
bombaglad said:
hey,
i got it up & running on my uefi windows 10 lenovo yoga (after some struggle i also have dual-boot). my question - how do i get gapps and supersu? it's not like you could simply flash some zips, as there is no recovery
Click to expand...
Click to collapse
ZOOMA7997 said:
Could you please let me know how you got it up and running? I am on a UEFI yoga as well, but after the installation,
grub doesn't show up and my computer boots automatically into Windows
Thanks in advance
Click to expand...
Click to collapse
Did you change the boot sequence in bios? Select android to boot 1st, then Grub should ask you which os you want to launch. I installed grub 2. I also went with the triple boot. My laptop is an Asus x401a with windows 7. Along with ubuntu and android. x86 Nougat.
A little help here mates,
I installed it alongside a windows 7 ultimate.
Gave it an 80gb Partition (fat32)
So I'm planning a dual boot here.
Here's my Steps:
used rufus to create bootable from android-x86-8.1-r1.iso
booted to Flash drive
installed android to 80gb partition (with grub/windows boot entry/ and data image of 2048MB)
after installation, Reboot to test boot options
grub didn't show up, booted directly to win7
Did some researches, and from those researches I should disable SECURE BOOT, but bios don't have that option.
Also tried EasyUEFI Tool which didn't even work in windows 7
Also, no settings for UEFI or Legacy.
Boot Order doesn't show Windows bootmanager or grub too, only HDD....
I installed android in ASUS Eee Notebook Laptop 1201b
I think the only problem here is grub cant load, but I run out of solutions, so here I am asking for help.
every android on work fine in my tablet(z3735f) but there is a bug in every os no sound in headphone any one tell me how to fix it
Link:
http://bbs.phoenixstudio.org/en/showthread.php?tid=5616
Update details
This version is 64bit with Kernel 4.9
Add Multiboxing feature（The feature allows you to create a duplicate of an app. The duplicate and origin one run separately with independent data and resources. All data in the duplicate will be erased after it's eliminated while data of the original one is still there.)
The screen problem cause by Nvidia Graphics card has been fixed.
Improve compatibility.
Update pre-installed apps
Support OTA
The keyboard mapping will automatically suspended while you're entering text.
1. Thanks. Every things work fine. Only missing GApps . Is there any way to install them?
2.I installed via exe file. I want to use my computer with tv via HDMi. My laptop is a few year old and it is BIOS, not UEFI. How I can Off nativ screen ( mylaptop screen)? I want to use only mt Tv as my main screen.
I have installed phoenix on hdd on tablet with intel atom x5 and intel hd graphic, UEFI Secured boot disabled, i choose phoenix from boot, after writing '' search phoenix os ... found on sdaetc.etc. '' The screen gets black and blocks everything, can you help me? sorry for my bad english
Lost sound with update
Hi Guys. After days of setting up my cheap X86_64 Chuwi Android box to run PhoenixOS and windows and to boot normally I lost sound after update. I had the hacked 2.0.1 version with gapps and root from a forum on the PhoenixOS website. Sorry I can't post links yet. So somehow someone got sound to work on this device but not sure how they did it. Windows says my soundcard is a Intel SST Audio Device (WDM). So now I have 2.0.2 but no sound. . Any Ideas?
Hey , where to download 2.0.2 32bit ? 64 bit is not working for me , same Problem like remix 64, blisspop 64 and all other Android x86_64 ... Just looping before bootlogo. I dont understand why becorse win 7 and 10 64 also working fine like of all Android x86 32. thanks
Version 2.0 is available for 32b
@wizmart
I know but 2.0.0 is not the same as 2.0.2 i will try it today , but i dont understand why 64 bit is looping while win 64 is working. I hope soon every New Version would be arriveable AS 32 bit , many people i know only can use 32 bit on older PCs.
stucks at a black screen..seems to be a bootloop on my laptop..(amd a4-6210)
tried dual booting with ubuntu and windows..same result
but boots fine on my computer with intel i3 and nvidia card!
can anyone tell me what is the problem and if there is a 32 bit version that will work? i need this for development processes!
So.. I just installed Phoenix OS on my laptop, using the latest exe file. Once finished, I went on to restart the PC, then, there is a screen / terminal that I can choose between 2 OS, which is my Windows 10 , and Phoenix OS. Picking Windows 10 would boot Windows 10, but when I pick Phoenix OS, it just goes black, then after 5 seconds it just restarts and goes back to the terminal. Reinstalling won't help. Turning off secure boot and fast boot also doesnt work. Please help.
.
If you are wondering if there are any white text or logs that show when I pick an OS on tge terminal, there is, but only when I pick Windows 10, picking phoenix, as I already said, doesn't show anything, just blackness, though I know the laptop is turned on because I can see the brightness, and after 5 seconds, it turns off and turns back on again (restarts)
My laptop specs are.. AMD A9-9420 , RADEON R5 M420, 4GB RAM.
Asus X555BP
have you tried this or this ?
I haven't tried any of those solution, I will try them out. But I am unsure on how to do the solution where you replace the grub file from ubuntu(?) because I do not have ubuntu and also, i do not have any knowledge about that OS. . Recently, I tried installing Phoenix OS via ISO using a bootable flash drice, and it gives me the same result. When I choose install on harddrive, it just restarts on the terminal, when i try boot directly from usb, it also restarts. Maybe theres some incompatability issues on my hardware?
EDIT: So sorry for not reading the whole thing, the grub files were on the attachements. I feel so dumb
Tried the two solutions, none worked. I will read from that thread and see if i can find any other solutions
Atsukiri said:
My laptop specs are.. AMD A9-9420 , RADEON R5 M420, 4GB RAM.
Asus X555BP
Click to expand...
Click to collapse
Sorry to say but Phoenix-OS has problems with APU or Radeon graphics ,I was banned when I raise this question on their forum ,try android-x86 ,it should work or bliss-x86
Actually the exact problem happen to My Dual Core PC too.. using NVIDIA GT 210
The answer is simple: Your processor is not supported.
hi guys, I want use Phoenix OS in my laptop with windows 7. but laptop don't asking to me in preloading screen. I was used before time windows 7 and Phoenix OS in this laptop. why I can't install now?
Phoenix os unable to boot
My CPU IS CORE 2 QUAD q6600 2.4GHZ
Phoenix not booting and going back to terminal again and again after detecting phoenix os.....found at /dev/sda3
Doesn't work on my Pentium Dual Core e5500 2.8 GHz
The Lollipop version of Phoenix OS works fine but the Nougat one won't run..
Same problem here.. Did you find any solution of this problem... If you find any solution please help me..
My laptop lenovo AMD E2.
WoltreX said:
The answer is simple: Your processor is not supported.
Click to expand...
Click to collapse
Thanks. Everyone tried to make their (old) rig work on Phoenix, I found installing 1.5 worked for me, too bad it is very outdated with the Play service unable to update (Error 910). Do you have any clues what could go wrong?
Thinkpad x100e, AMD NV-40, 4G RAM
I have installed Phoenix Os on a variety of laptop and pc processors, succes install Phoenix Os on Acer A6 and Lenovo A8 with Phoenix ROC : D, sucess installs my PC core 2 duo E7500 with Phoenix Os v1.5 because it only supports sse4.1, and my laptop Lenovo a9 succes install Phoenix OS with a little problem in UEFI bios settings, try to set UEFI to allow access to Boot for Phoenix OS, so if anyone thinks Phoenix OS can't be installed on the AMD processor it is wrong >: |
Same problem
I'm going through same problem.. have you find any solution??? I'm on AMD too
Edit: Problem's with nougat version.. Running Lollipop version successfully
WoltreX said:
The answer is simple: Your processor is not supported.
Click to expand...
Click to collapse
nope i worked phoenix on dual core processor