Galaxy Tab A (SM-T280) - sm command not found - Samsung Galaxy Tab A series Questions & Answers

So im trying to get an SD Card to work as internal storage. Found several instructions on how to and they all make use of the sm command within ADB-shell. However this command cannot be found on this device. I tried with my phone and there it works. both devices are unrooted, the tab runs android 5.1.1 (latest available)
What can I do to get this dommand onto the tab? Can i somehow copy it over from ym phone?

steiner84 said:
So im trying to get an SD Card to work as internal storage. Found several instructions on how to and they all make use of the sm command within ADB-shell. However this command cannot be found on this device. I tried with my phone and there it works. both devices are unrooted, the tab runs android 5.1.1 (latest available)
What can I do to get this dommand onto the tab? Can i somehow copy it over from ym phone?
Click to expand...
Click to collapse
You can't, it only works on MM >

MM?
Any other way to get the SD Card working as internal?

steiner84 said:
MM?
Any other way to get the SD Card working as internal?
Click to expand...
Click to collapse
Link2sd plus

thanks

Related

[HOWTO] WORKAROUND for BELL i9000m Internal SD Card Failure!!!!!

Hello Everyone,
I like most people upgraded my Bell i9000m from Kies to Froyo, only to have it bricked with the "can't mount /dev/block/mmcblk0" error at the recovery screen during boot-up. I upgraded it last week, where it took the firmware from JL8 to I believe JK3 or JL8 (not sure at this point).
Unfortunately I bought my phone from some guy on Kijiji using it on Rogers, so I doubt Bell is going to handle the return or give me any love
Anyways, I spent many days long days trying to get it back working, and I found a work-around that requires using an external SD card. and going back to Android 2.1 ECLAIR
Steps (This is what I did):
1. Install JK3 stock ROM via Odin (with re-partition at the pit on samfirmware.com, didn't update boot loader)
2. Install K13c speedmod kernel via Odin
3. Insert 16GB External SD card
3. Boot phone to Froyo
4. Reboot to recovery console and wipe data/everything
5. Install JL8 stock ROM via Odin (no re-partition, didn't update boot loader)
6. Phone will boot-up into recovery mode and automatically do wipe data
7. Phone will boot into ECLAIR
8. You will see internal storage of 1.85GB free.
9. Install Market apps - I installed twitter
10. If you remove external SD card, twitter will crash.
11. If you reboot phone without external SD card, you will get rebooting logo
12. If you put external SD card back it, phone boots!
This wasn't a fluke - I was able to reproduce if I flashed other ROMS (XXJPY or similar) instead of JK3.
Background:
Even though the phone can't boot with stock ROM, if I install JK3 ROM + speedmod K13b speedmod kernel, I can get the phone to boot to Froyo, but there is no internal storage (it shows up as 0 bytes available). So you can't install Market apps, and therefore is useless. I can't even mount the external SD card under the Settings app!
So I tried to log in the Froyo device using adb shell, and what I found is that internal SD card is no longer showing up under linux, and the OS thinks that the external SD card is the internal one. This is probably why the external SD card can no longer be mounted.
I figured out that the external SD card shows up as /dev/block/mmcblk0!!! WHich is the same block device as the internal SD card...so I'm thinking if I reboot into recovery and format SD card, how come it's not working? I even tried to partition the external SD card with android partitions, but still nothing!
I think Froyo is 'smarter' in that it knows the external SD card is not internal (whether it's grepping the device-info for manufacture data, don't know).
But if I go to JL8 Eclair, the Android 2.1 is 'dumb' enough that is doesn't see the difference between internal and external, so formats the external to look like internal.
Once I boot to ECLAIR, the external SD card is greyed out under Settings app, but I get 1.85GB internal storage!! OK I can't access the whole 16GB of the card, but at least my phone is not toast.
I can go ahead an install apps, which will install to the external SD card. But if you remove the external SD card, the phone will no longer boot. If I remove the card and apps are running, apps will crash (case in point: I tried twitter).
It will be nice if others can re-produce my findings. But for now my Samsung Galaxy S has been saved!
Kashif Shaikh
this sounds promising, can some more people confirm this solution to use External SD to imitate internal SD?
It worked for me as well! I have i9000M version, with internal SD failure. I'm also using 8GB external microSD card. I tried several 2.2 Android firmwares - specifically I9000XXJPY, I9000XXJPU. With update to speedmod-kernel I'm able to load device, but it doesn't see neither internal nor external SD card. So I couldn't install any applications, upload data or even shot with camera.
Based on this thread, on top of XXJPY with speedmod kernel I uploaded I9000XWJM8 firmware (Android 2.1) with Odin 1.7, no repartitioning. It worked right away - device loaded and I can see ~2GB of program storage (assume they storage is located on my external card). Both internal and external cards are shown as "Not available" in settings. I can install applications now, which made "brick" a bit better then it was before. Unfortunately, I still can't upload any data, i.e. a book for FB2Reader. And can't make a photo with my camera. And it's now Android 2.1, which looks slower.
First of all - thanks for the advice! It would be good to have this topic "sticked" and distributed - there might be other guys with no chance to repair phone under warranty.
Secondly - if someone can do a "hack" for Android 2.2 firmware so it can use external SD card for program storage specifically for I9000M device? And it would be terrific, if the remaining part of SD card (or at least some fixed size, like 4 GB) can be mounted as storage, so the data like music or photo or books can be uploaded.
I'm able to connect to the phone using adb tool, but I can't find a folder on the device where I can upload (push) a file to. I'd like to upload a book to the device so I can finally use it as a reader. I tried all "root" folders (adb shell -> ls) and all don't work. It says "No such file or directory" or "Permission denied".
Is there a folder on the device which I can push file to using adb tool? Maybe somewhere where applications are installed to, i.e. Program Storage location. Please help!
Anyone else following this thread with I9000M with internal card dead?
This isn't much of a fix. This will only work with phones with slightly corrupted (and not fully corrupt) sdcards; eventually your phone will probably stop booting with this "fix" as well. You're going to eventually loose some of the other partitions such as stl10 to corruption, and then you're screwed.
The OP's phone is corrupt in a specific way that allows this - and there are various procedures that will get your phone to a semi-bootable state if you only have a partially dead sdcard. Like the OP said - just installing speedmod kernel with an external SD in will allow your phone to boot, for example (I got my dead sd i9000m to boot froyo with the speedmod kernel, and others had reported the same as well). Then if you're technical enough you can switch around your mount configs and get it to work without the internal mmc device.
It doesn't matter if you bought your phone off kijiji or craigslist 2nd hand; send it back to samsung (or go thru futuretel or a similar provider). No receipt is going to be required (if they ask... just say you can't find it). Products like this will always be repaired under warranty based on manufacture date code.
Send your phone back; don't try to fix it - it's a hardware problem with the mmc connection.
Unfortunately, I'm 10 thousand miles away from Canada with no chance getting there. If I had option to send it back for repair I would do it right away. So I'm searhing an option to use this semi-brick as much as possible.
My i9000M phone has totally corrupted internal SD card - it failed two months ago and I tried all options for it reformatting / remounting / whatever. With speedmod kernel it loads even without external sd card. It just allows loading without internal storage - not use external card to mimic internal. Unfortunately, it doesn't see any storage then - no internal, no program, no external card. So it just loads.
With Android 2.1 and external card it loads _and_ see 2GB of program storage (on external card). It doesn't see any other storage - so I can't upload any file. But at least I can install applications.
I'll try this solution after buy a Microsd card. My i9000M internal sdcard dead in two days ago after fixlag use ext2 partitions.
hi all. i didn't find JL8 stock ROM for sumfireware.com.where can find it ?
i flash my phone step by step as top post.
but after flash 2.1 rom with insert SD card , my Phone still cannot boot into ECLAIR .
who can help me? thanks. my phone can boot to 2.2 system without internal card.
SHINE.YANG said:
hi all. i didn't find JL8 stock ROM for sumfireware.com.where can find it ?
i flash my phone step by step as top post.
but after flash 2.1 rom with insert SD card , my Phone still cannot boot into ECLAIR .
who can help me? thanks. my phone can boot to 2.2 system without internal card.
Click to expand...
Click to collapse
Samsung or bell can help you. Send your phone in for repair....
for same reason .i cannot send my phone to bell. so i very want to know find JL8 rom to let me phone canbe use . please help.
HI guys . thanks for your help.
actually ,every I9000 2.1 rom CAN use this solution. just need your external SD same as your phone internal SD size. if you are 8G internal SD , you must use 8G external SD card with 2.1 ROM . you can get 1.85G system space.
I've just tried XWJVB firmware - stock Android 2.3.3 - and it also works! Phone loads without flashing custom kernel.
I wonder, if there is a way to upload any file to the phone - so I can put there a book and read it.
does this mean this workaround still can't recover the files that were originally in my internal sd?
Nope. the internal sd is gone, probably forever.
workaround allows running the phone and having 2GB out of microsd card available for programs storage. it allows downloading and installing application from app market. still, you don't have other storage - can't upload a file or even make a photo with camera.
very wierd. if anyone would suggest a workaround to upload file to the device - even using any hacked way, like from abd or whatever
I flashed custom Kernel (CF-Root-XW_XEE_JVB-v3.1-CWM3RFS) over latest JVB. The device is now rooted.
Using adb tool I was able to push fb2 file to device - specifically to dev folder. (adb push file.fb2 /dev). Using Moon Reader I can open and read it! That's terrific after long time of finding a way of doing this.
Unfortunately, Moon reader is the only app that works. FBReader tries to open the book but fails with writing cache to sd card (which is broken).
This is a most useful post, thank you. I get the phone working on 2.2 which is great but I am unable to find the JL8 stock ROM, I locked for it everywhere but could not find it, would someone please indicate where to find it...
raullugo said:
This is a most useful post, thank you. I get the phone working on 2.2 which is great but I am unable to find the JL8 stock ROM, I locked for it everywhere but could not find it, would someone please indicate where to find it...
Click to expand...
Click to collapse
Why would you need old stock ROM?
Just flashed XXJVP stock ROM to my I9000M. This is Android 2.3.4. Taken from http://forum.xda-developers.com/showthread.php?t=1011901
Flashed CF-Root-XX_OXA_JVP-v3.7-CWM3RFS on top of it for rooting
Phone works
It needed some tricks this time to upload a file to deivce. For some reason all folders appear to be read only, including dev. So I used abd shell command to change folder permissons
adb shell
$ su
# chmod 777 /data
then exit and
adb push file.fb2 /data
File is stored and is not lost on reboot, like it was for dev folder
stuck on step 6..
first of all, this is a great post for those who still stuck with a dead i9000m and no help from Sammy!
Steps (this is how i followed)
1. fine
2. fine
3. fine (i inserted a 16gb Sandisk class 2 in FAT32 format)
3a. i couldn't 'boot to froyo' i'm not sure if you mean fully boot into the OS or not, but it was in a bootloop
4. i was able to get to step 4 somehow to the recovery (3e) and wipe data (there was still the cant mount error when wiping data but no error when wiping cache partition - is that normal?)
5. i cant find JL8 but others here suggested any other 2.1 ROM works so i tried JM8 (no repart/no update bootloader)
6. the phone did do something other than boot loop! (first time wow!) it was trying to copy something but it didn't go all the way through.. there was an error saying 'efs format failed /dev/block/mmcblk0p2' after/during 'coping media files'.
- could it be the wrong format going in (should it be something other than FAT32?)
- could it be that class 2 was not the right class (no fast enough??)
- the copying process stopped after it finished copying media files.. (the micro sd card did have some media files
- there was 2 folders Samsung folder (with media files) and svox (i think that was the name of the folder)
can anyone shed some light on where i did wrong, thanks everyone, love this forum btw.
pavbul said:
Why would you need old stock ROM?
Just flashed XXJVP stock ROM to my I9000M. This is Android 2.3.4. Taken from http://forum.xda-developers.com/showthread.php?t=1011901
Flashed CF-Root-XX_OXA_JVP-v3.7-CWM3RFS on top of it for rooting
Phone works
It needed some tricks this time to upload a file to deivce. For some reason all folders appear to be read only, including dev. So I used abd shell command to change folder permissons
adb shell
$ su
# chmod 777 /data
then exit and
adb push file.fb2 /data
File is stored and is not lost on reboot, like it was for dev folder
Click to expand...
Click to collapse
Thank you for the instructions, tha only reason to look for the jl8 rom is to follow the instructions to the letter. I trying your method right now, thank you for taking the time to give me another shot at my SGS, I will let you know how it goes

[Q] SD Card blank or has unsupported filesystem

Hello guys,
I have a Galaxy S5 G900T running the AllianceRom 3.1 made for G900F. I use an external SD Card SanDisk 16GB and since yesterday I never had a problem.
So, now I'm experiencing this error: "SD Card blank or has unsupported filesystem" on Notification Panel. When I click on it, android asks me if I want to format the card, I click OK, and at the end the same problem occurs.
Things I already tried to do:
1) I tested the SD Card into another Galaxy S5 and it's running OK without the problem;
2) I formatted the SD card (full format) on a windows computer. Windows recognizes it, and it's running OK;
3) I checked the file vold.fstab on /etc folder and it has the same content as another Galaxy S5 that is running OK the SD card;
4) I re-flashed the AllianceRom 3.1;
[EDIT 1]
5) Tried to wipe the SD Card using TWRP Recovery (as image 1 attached)
6) Tried to partitioning using TWRP Recovery (as image 2 attached)
[EDIT 2]
7) I bought another SD Card, a Samsung 64GB and when I insert it on device I don't get this error, but also not able to mount, it doesn't even recognizes the SD card.
p.s. I searched a lot on XDA, even on Google, and those was the possible solutions I've found, but didn't work for me.
Does someone experienced this problem and was able to fix?
Does anyone knows another alternative that could work?
Thanks in advance
breni said:
Hello guys,
I have a Galaxy S5 G900T running the AllianceRom 3.1 made for G900F. I use an external SD Card SanDisk 16GB and since yesterday I never had a problem.
So, now I'm experiencing this error: "SD Card blank or has unsupported filesystem" on Notification Panel. When I click on it, android asks me if I want to format the card, I click OK, and at the end the same problem occurs.
Things I already tried to do:
1) I tested the SD Card into another Galaxy S5 and it's running OK without the problem;
2) I formatted the SD card (full format) on a windows computer. Windows recognizes it, and it's running OK;
3) I checked the file vold.fstab on /etc folder and it has the same content as another Galaxy S5 that is running OK the SD card;
4) I re-flashed the AllianceRom 3.1;
p.s. I searched a lot on XDA, even on Google, and those was the possible solutions I've found, but didn't work for me.
Does someone experienced this problem and was able to fix?
Does anyone knows another alternative that could work?
Thanks in advance
Click to expand...
Click to collapse
Copy the content of the sdcard to the pc and format the card on the phone itself, that should fix the issue.
gee2012 said:
Copy the content of the sdcard to the pc and format the card on the phone itself, that should fix the issue.
Click to expand...
Click to collapse
Already did... didn't fix
breni said:
Already did... didn't fix
Click to expand...
Click to collapse
What is the sdcard`s format?
gee2012 said:
What is the sdcard`s format?
Click to expand...
Click to collapse
FAT 32
breni said:
FAT 32
Click to expand...
Click to collapse
Should be good, sure the card isn`t damaged?. Did you try it in another phone (forget it as you tried this allready)? No idea bro, hope someone else can help you to you get it solved.
@gee2012, the SD card works on computer and another cellphone... I tried several things, as explained on first post...
Tried now wipe the sd card usind TWRP Recovery, but got fail message as image uploaded
Sent from my SM-G900F using XDA Free mobile app
gee2012 said:
Should be good, sure the card isn`t damaged?. Did you try it in another phone (forget it as you tried this allready)? No idea bro, hope someone else can help you to you get it solved.
Click to expand...
Click to collapse
Anyway, thanks bro... I'll keep searching and as soon as I get anything new, I'll post here...
Sent from my SM-G900F using XDA Free mobile app
breni said:
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried if CWM/ Philz Touch recovery works? Just an idea
gee2012 said:
Have you tried if CWM/ Philz Touch recovery works? Just an idea
Click to expand...
Click to collapse
The strange thing is that I'm able to access the ext SD Card on TWRP Recovery, as you can see on the image attached... I even copied a file (backup.txt) into it.
Sent from my SM-G900F using XDA Free mobile app
breni said:
The strange thing is that I'm able to access the ext SD Card on TWRP Recovery, as you can see on the image attached... I even copied a file (backup.txt) into it.
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried another SD card in your phone? EDIT: Nevermind this bit
When you plug the SD card into your handset (do it while it's off) Does the SD Storage show anything?
You could try formatting it in another handset if you have the chance then try plugging it in.
Are you using stock Sammy firmware? Or have you installed a custom kernel? Could be one of those playing havoc with your device if so, back up and revert to stock if you can, retest the SD in there.
Test to see if you can retrieve data from the SD card, i've found that although SD cards show up in windows, when I attempt to copy data to the PC it fails, when I say fail I mean it stops progressing and doesn't copy, particular files appear corrupt.
You could also do a chkdsk /f /r via windows on the SD card, or even a general error check.
chances are one of these things will be the culprit, if none and it's still working in another phone and other cards are working in your device then i'm stumped.
Good luck
I would try philz recovery, i had all kinds of problems with twrp on my note 3 and s5 until switching. Not knocking twrp this is just my experience
dladz said:
Have you tried another SD card in your phone? EDIT: Nevermind this bit
When you plug the SD card into your handset (do it while it's off) Does the SD Storage show anything?
You could try formatting it in another handset if you have the chance then try plugging it in.
Are you using stock Sammy firmware? Or have you installed a custom kernel? Could be one of those playing havoc with your device if so, back up and revert to stock if you can, retest the SD in there.
Test to see if you can retrieve data from the SD card, i've found that although SD cards show up in windows, when I attempt to copy data to the PC it fails, when I say fail I mean it stops progressing and doesn't copy, particular files appear corrupt.
You could also do a chkdsk /f /r via windows on the SD card, or even a general error check.
chances are one of these things will be the culprit, if none and it's still working in another phone and other cards are working in your device then i'm stumped.
Good luck
Click to expand...
Click to collapse
Hello mate,
Thanks for answering
When you plug the SD card into your handset (do it while it's off) Does the SD Storage show anything?
I get the same problem: SD Card blank or has unsupported filesystem
You could try formatting it in another handset if you have the chance then try plugging it in
I tested the SD card on another device and it's working fine, also on my windows pc
Are you using stock Sammy firmware? Or have you installed a custom kernel? Could be one of those playing havoc with your device if so, back up and revert to stock if you can, retest the SD in there.
I formatted my device right now and installed Samsung stock firmware with stock kernel. I also tried to get back to stock recovery, then installed CWM and TWRP, but the same problem
I'm starting to think this is a hardware problem, because I tried everything and nothing happened.
breni said:
Hello mate,
Thanks for answering
When you plug the SD card into your handset (do it while it's off) Does the SD Storage show anything?
I get the same problem: SD Card blank or has unsupported filesystem
You could try formatting it in another handset if you have the chance then try plugging it in
I tested the SD card on another device and it's working fine, also on my windows pc
Are you using stock Sammy firmware? Or have you installed a custom kernel? Could be one of those playing havoc with your device if so, back up and revert to stock if you can, retest the SD in there.
I formatted my device right now and installed Samsung stock firmware with stock kernel. I also tried to get back to stock recovery, then installed CWM and TWRP, but the same problem
I'm starting to think this is a hardware problem, because I tried everything and nothing happened.
Click to expand...
Click to collapse
Quite an odd one that, i'm a little stumped.
did you try error checking on windows? OR even a format in a different handset? OR a different card in your phone to see if to see if it reads?
On the other hand if the phone isn't that old, return it, 28 day swap should be good if you're in time, otherwise it's back to sammy.
sorry I can't be of more help m8.
Same problem with GalaxyS5 and 64 GB card
I am having the same issue with a 64GB memory card in the Galazy S5. Blank or unsupported file system.... doesn't format in phone. works great on PC and even on old Motorola Razr phone, format exFAT and FAT32 tried but the phone doesn't care.
please help, I first bought a sandisk card and returned it because i hoped the same brand SAMSUNG would work, nope nope...
HEEELLLPPPP
Thanks
David
Same problem with GalaxyS5 and 64 GB card
Have you found a solution to the OP?
I have an S5 too and it's doing exactly the same. I tried a 64GB Sandisk and Samsung cards, both work flawlessly in PC, MAC and even a different phone. WTH???? My 32GB Sandisk works well in the GAlaxy S5 too, I am about to see if it blends....
breni said:
Hello guys,
I have a Galaxy S5 G900T running the AllianceRom 3.1 made for G900F. I use an external SD Card SanDisk 16GB and since yesterday I never had a problem.
So, now I'm experiencing this error: "SD Card blank or has unsupported filesystem" on Notification Panel. When I click on it, android asks me if I want to format the card, I click OK, and at the end the same problem occurs.
Things I already tried to do:
1) I tested the SD Card into another Galaxy S5 and it's running OK without the problem;
2) I formatted the SD card (full format) on a windows computer. Windows recognizes it, and it's running OK;
3) I checked the file vold.fstab on /etc folder and it has the same content as another Galaxy S5 that is running OK the SD card;
4) I re-flashed the AllianceRom 3.1;
[EDIT 1]
5) Tried to wipe the SD Card using TWRP Recovery (as image 1 attached)
6) Tried to partitioning using TWRP Recovery (as image 2 attached)
[EDIT 2]
7) I bought another SD Card, a Samsung 64GB and when I insert it on device I don't get this error, but also not able to mount, it doesn't even recognizes the SD card.
p.s. I searched a lot on XDA, even on Google, and those was the possible solutions I've found, but didn't work for me.
Does someone experienced this problem and was able to fix?
Does anyone knows another alternative that could work?
Thanks in advance
Click to expand...
Click to collapse
Same here. My phone already went in for repair for this and the front camera ring falling issue. Mine was preordered and shipped at launch. It worked a few weeks and now has stopped again. Simply won't recognize any SD cards. I tried an old 2GB, a Kingston 16GB, a Lexar 32GB from my GoPro, and a Sandisk 64GB. All cards work elsewhere, but my S5 never indicates anything is inserted. This is my first Samsung, and it might be my last. I never experienced issues like this on an HTC.
Any progress here? I just got a sweet 64g card Samsung because my others have worked well BUT...
S5 Blank SD card of death. ....

Adoptable storage feature on Marshmallow update

I want to use the feature that allows the SD card to be used as Internal storage rather than Portable storage. When I go to Settings-Storage there are no 3 bar, "settings" to allow me to chose to change my current SD card to act as Internal storage. It only Identifies it as Portable storage. It does the same thing when I put in a new SD card. I have a second Galaxy S5 that does exactly the same time so it would appear that the Verizon S5 doesn't support that feature of Marshmallow. Any suggestions?
zico21 said:
I want to use the feature that allows the SD card to be used as Internal storage rather than Portable storage. When I go to Settings-Storage there are no 3 bar, "settings" to allow me to chose to change my current SD card to act as Internal storage. It only Identifies it as Portable storage. It does the same thing when I put in a new SD card. I have a second Galaxy S5 that does exactly the same time so it would appear that the Verizon S5 doesn't support that feature of Marshmallow. Any suggestions?
Click to expand...
Click to collapse
Samsung removed Adopted Storage because they were too lazy to make it work.
The trick to make it work on the S7 does work on the S5.
http://www.modaco.com/news/android/...e-adoptable-storage-on-your-s7-s7-edge-r1632/
Instead of the : separator I had to use , as the separator to match what I saw in the responses to adb commands.
use the same character you see between the disk numbers after you execute the "sm list-disks" command.
Adoptable Storage Hack Not Working
My son and I each have a 16GB Samsung Galaxy S5, and have followed the procedure listed in Paul O'Brien's article for the S7. Neither of us saw any errors, but it is apparent that the S5 is not using the newly-prepared SD card. My son was getting low memory warnings, which prompted him to try this out. The problem is that he is still getting the warnings after setting up a fast 32GB SD card. Has anyone had the same experience? Has anyone solved the problem?
Big red is crap
Sent from my SM-G900V using Tapatalk
sean19661 said:
Big red is crap
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Don't blame Big Red for this, this is the doing of Samsung
make sure you have the latest version of adb installed before executing commands. data ratio is done with this , instead of this :
[email protected] said:
make sure you have the latest version of adb installed before executing commands. data ratio is done with this , instead of this :
Click to expand...
Click to collapse
To be clear before I try this (sorry if this is a stupid question), would you replace both : with , ?
Like this: 'sm partition disk,179,160 private'
OR just the : in the ratio itself
Like: 'sm partition disk:179,160 private'
Thanks!
kuyankee said:
To be clear before I try this (sorry if this is a stupid question), would you replace both : with , ?
Like this: 'sm partition disk,179,160 private'
OR just the : in the ratio itself
Like: 'sm partition disk:179,160 private'
Thanks!
Click to expand...
Click to collapse
Yes just for the ratio itself.
GS5 Adoptable Storage
tngeezer said:
My son and I each have a 16GB Samsung Galaxy S5, and have followed the procedure listed in Paul O'Brien's article for the S7. Neither of us saw any errors, but it is apparent that the S5 is not using the newly-prepared SD card. My son was getting low memory warnings, which prompted him to try this out. The problem is that he is still getting the warnings after setting up a fast 32GB SD card. Has anyone had the same experience? Has anyone solved the problem?
Click to expand...
Click to collapse
I am having the same problem with my GS5. Followed all the steps, no error messages but the 64gb was not set up. Any ideas?
Thanks
galaxy2016 said:
I am having the same problem with my GS5. Followed all the steps, no error messages but the 64gb was not set up. Any ideas?
Thanks
Click to expand...
Click to collapse
I was having the same issue. Then, in the comments of the linked article I found the following step, which worked for me:
After following the steps to set it to private: Settings > Storage > SD card > More. Migrate your data
That seemed to do the trick for me. It now shows tons of storage even when plugged into my PC. So far so good. I'll report back if I run into any issues with it.
Worked for me
galaxy2016 said:
I am having the same problem with my GS5. Followed all the steps, no error messages but the 64gb was not set up. Any ideas?
Thanks
Click to expand...
Click to collapse
Followed all the steps for my GS5. I thought it was a dud at first, until I realized that I forgot to replace the : with a komma. Worked like a charm! Verizon be damned! Good luck.
My app downloads are still being saved to the phone internal storage, not the adopted storage on the SD card. Shouldn't have to migrate data do SD if S5 supports adoptable storage. Anyone know a workaround or a solution. Thanks.
After following all of the steps with ADB, it seems like I'm successful, but when I reboot, my new, formatted, working SD card (Lexar MicroSDHC 633x 32GB) comes up as corrupt. Any ideas?
(I tried using Root essentials too -tried both methods 4 or 5 times... but no dice)
For those of you that got adoptable storage working - what ROM are you on. I'm trying to figure out if Touchwiz is what's blocking it for me - do you have to be on a CM13 build?
@Nova5 ? @[email protected] ? @kuyankee ? @Mortis13 ?
Thanks!
To make it work on the s5 you need adb, connect the phone by USB and issue the commands through adb on the desktop. Samsung hid the option from the gui.
Nova5 said:
To make it work on the s5 you need adb, connect the phone by USB and issue the commands through adb on the desktop. Samsung hid the option from the gui.
Click to expand...
Click to collapse
@Nova5 - thanks. But as I mentioned in the previous post, I've tried it on adb on the desktop. Looks/acts like it works, but when I reboot, the SD card shows up as corrupted. Everything I've read seems like it SHOULD be able to work, but I'm running into a dead end with every tip I get.
Have you done it and gotten it to work? What ROM are you on? What SD card are you using?
(Those are the only variables I can think of that would be causing me a problem.)
Im running my stock rom, non-rooted VZW S5 with it, used the ADB commands, many reboots. No problems. You do have to ignore the bizarre memory count in the Storage settings. When Samsung removed the UI for Adoptable, they also prevented it from properly calculating it. It works, but it just counts wrong. I used a 128Gig Silicon Power Ultra1 class card. Did a 25/75 split so that I have a decent sized user accessible space.
"sm partition disk:179,160 mixed 25"
Was the command I used (change numbers to match your discovered disk numbers) the 25 is what percentage you want to give to adopted internal memory.
Running fine and has been since I posted on June 3rd. Start with a totally blank card, no partitions at all. get into developer settings, enable USB debugging, use ADB, connect, issue command. Wait while it processes. Sometimes its seconds, sometimes minutes. If you're using a custom rom, that could be the problem. Samsung half crippled it, but it still works
Is link2sd still not working with marshmallow? Not being affable to really move apps to the adoptable storage was really killing me, had to downgrade to 5.0
zico21 said:
I want to use the feature that allows the SD card to be used as Internal storage rather than Portable storage. When I go to Settings-Storage there are no 3 bar, "settings" to allow me to chose to change my current SD card to act as Internal storage. It only Identifies it as Portable storage. It does the same thing when I put in a new SD card. I have a second Galaxy S5 that does exactly the same time so it would appear that the Verizon S5 doesn't support that feature of Marshmallow. Any suggestions?
Click to expand...
Click to collapse
If the phone is rooted, I believe there is an app that you can install that will set it up for you. Otherwise you have to enter some commands using ADB shell.
I used this guide to get mine going. Don't forget to migrate data when you are done!
http://www.modaco.com/news/android/...e-adoptable-storage-on-your-s7-s7-edge-r1632/

Adoptable storage on Samsung ON5?

Model SM-G550T1, internal storage of 8GB near exhausted after installing just a few apps. Is there a way to get "Adoptable Storage" feature working on this phone so I can make better use of installed microSD card?
I've tried `sm` commands from `adb shell`, but with no luck. The most telling fact seems to be that when I type `sm has-adoptable`, the answer is `false`.
Would someone please tell me how to use Apps2SD?
BHarris said:
Model SM-G550T1, internal storage of 8GB near exhausted after installing just a few apps. Is there a way to get "Adoptable Storage" feature working on this phone so I can make better use of installed microSD card?
I've tried `sm` commands from `adb shell`, but with no luck. The most telling fact seems to be that when I type `sm has-adoptable`, the answer is `false`.
Click to expand...
Click to collapse
Have you tried "sm set-force-adoptable true"????????
Try that or maybe in the last 3mths you have found other alternatives, either way that should work

SM-J320F Setting External SD card as Internal

Hi all,
I'm new to smartphones and this is my first phone . I'm trying to sent external SD card as internal storage. Issue is that phone has only 8GB of ROM and by default 3.2 is System and 3.5 is Used space. So there is just a tiny space left on the internal memory. Android version is 5.1.1. I have rooted it with TWRP 3.0.2-0 and SuperSU. SD card is Kingstone SDca3/32GBn0557-004A00LF.
I have been reading a lot of tuturials to make external memory internal with no luck. I have tried adb tools, formating it with Mini Tool Partition Wizard-DroidThunder, a2sd, Link2SD, etc... I'm also OK with installing custom ROMs that will enable me to make internal memory of my SD card.
Any help will be much appreciated. Thanks xD.
1Igrach said:
Hi all,
I'm new to smartphones and this is my first phone . I'm trying to sent external SD card as internal storage. Issue is that phone has only 8GB of ROM and by default 3.2 is System and 3.5 is Used space. So there is just a tiny space left on the internal memory. Android version is 5.1.1. I have rooted it with TWRP 3.0.2-0 and SuperSU. SD card is Kingstone SDca3/32GBn0557-004A00LF.
I have been reading a lot of tuturials to make external memory internal with no luck. I have tried adb tools, formating it with Mini Tool Partition Wizard-DroidThunder, a2sd, Link2SD, etc... I'm also OK with installing custom ROMs that will enable me to make internal memory of my SD card.
Any help will be much appreciated. Thanks xD.
Click to expand...
Click to collapse
Try Lineage os 14.1 UNOFFICIAL-J3xnlte rom first
https://forum.xda-developers.com/ga...-lineageos-13-samsung-galaxy-j3-2016-t3621950
and try this ....
need :
faster sd card (class 10)
Mini Tool Partition Wizard
1 gb fat32
.... gb ext4
emulator for android from googleplay
open and type
su
pm set-install-location 2
exit
close emulator
install diskusage from googleplay
reboot
install an app
open diskusage and check app instalation directory
excuse my English
You could update to marshmallow and use adoptable storage.
ashyx said:
You could update to marshmallow and use adoptable storage.
Click to expand...
Click to collapse
Not all phone sm 320f gets uptade to marshmallow
Costel28 said:
Not all phone sm 320f gets uptade to marshmallow
Click to expand...
Click to collapse
On this phone I'm able to install only Android 5.1.1. If I just custom ROM as suggested would I be able set up extrenal SD card as internal storage.
Costel28 said:
Not all phone sm 320f gets uptade to marshmallow
Click to expand...
Click to collapse
Ah yes, forgot this device uses a Spreadtrum chipset so will likely never get an update.
Install lineage 14.1 and format sd card into intern memory
Read xda forum for installing lineage on sm j320f
Screenshot storage
Sorry for the late response, I finally manage to get a day off. Thank you all for helping me xD. I wil install Lineage 14.1 and I have some questions. I was able to find this one LOS 13 and this is Android 6.0. I have also find this on youtube How To Install Android 7.1.2 Nougat on Samsung Galaxy J3 Nougat Custom Rom Lineage OS 14.1 but I'm unable to download ROM, the link is not working. I'm OK with any version of Android that will allow me to get SD as internal.
1Igrach said:
Sorry for the late response, I finally manage to get a day off. Thank you all for helping me xD. I wil install Lineage 14.1 and I have some questions. I was able to find this one LOS 13 and this is Android 6.0. I have also find this on youtube How To Install Android 7.1.2 Nougat on Samsung Galaxy J3 Nougat Custom Rom Lineage OS 14.1 but I'm unable to download ROM, the link is not working. I'm OK with any version of Android that will allow me to get SD as internal.
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...rom-lineageos-14-1-samsung-galaxy-j3-t3667015
1Igrach said:
Sorry for the late response, I finally manage to get a day off. Thank you all for helping me xD. I wil install Lineage 14.1 and I have some questions. I was able to find this one LOS 13 and this is Android 6.0. I have also find this on youtube How To Install Android 7.1.2 Nougat on Samsung Galaxy J3 Nougat Custom Rom Lineage OS 14.1 but I'm unable to download ROM, the link is not working. I'm OK with any version of Android that will allow me to get SD as internal.
Click to expand...
Click to collapse
My
Thanks @Costel28. I will try this ROM. My Baseband version is J320FXXU0AQE2, does this matter.
Also I have TWRP 3.0.2-0, I'm assuming I have to update to 3.1.1. Also what variant of GApps should I use; stock, full? And me beeing a noob is this ROM rooted or I need to root it again xD?
1Igrach said:
Thanks @Costel28. I will try this ROM. My Baseband version is J320FXXU0AQE2, does this matter.
Also I have TWRP 3.0.2-0, I'm assuming I have to update to 3.1.1. Also what variant of GApps should I use; stock, full? And me beeing a noob is this ROM rooted or I need to root it again xD?
Click to expand...
Click to collapse
Stock , after I installed Aroma whit Opengaps app.
Read instructions .
1Igrach said:
Thanks @Costel28. I will try this ROM. My Baseband version is J320FXXU0AQE2, does this matter.
Also I have TWRP 3.0.2-0, I'm assuming I have to update to 3.1.1. Also what variant of GApps should I use; stock, full? And me beeing a noob is this ROM rooted or I need to root it again xD?
Click to expand...
Click to collapse
My phone
Stock room ---J320FXXU0AQE2
LINEAGE 14.1 ---J320FXXU0APG2
I was able to install RR 8.5.8 with Android 7.1, SD card is formated as internal storage. It's OK for now, but still when I go to storage internal SD and external appear as to separate cards. I have migrated all the stuff to external. Some app. do not have option to move to external SD card. Both cards are appearing as separate units. I have seen this tutorial https://www.androidpit.com/how-to-format-microsd-cards-as-internal-storage. It appears that both cards are seen as one by the Android. This is exactly what I want. I have been trying this article with no joy. Can some one please explain me that exactly I need to do? Thanks XD!
hello there i am also interested in getting this done for a friend...would love to know your results so far as of what little i know about spreadtrum devices they are notoriously hard to work with and tend to brick quite often.. @1Igrach if you could post your results regarding this issue it would be much appreciated thank you

Categories

Resources