Related
First want to say hi and that this site is full of knowledge so any help with my subject will be great.
Got a att s4 sgh-i337 phone. I rooted it before the lollipop ota update was out and everything went fine. Then the lollipop update came out and I followed one of the methods on keeping root and updating to 5.0.1 lollipop on the phone. Everything went fine with that. Still showed root status and never did the phone brick or have any issues in the updating.
At some point though, I did run triangle away because I would have the custom logo and opened padlock when the phone would boot up. I knew it wasn't a huge deal but the counter showed correct and never could just figure out how to get it to go away. Either way, I did run it and I think rebooting twice, the factory loading image came back to it. Now it shows my current status as 0 for the counter and the binary is Official.
I have not tried to load any roms or nothing like this to the phone, just followed the instructions to give it root access so I could run a few different apps and adaway for when I listen to Spotify.
One day, I was trying to install a new version of Words with Friends and it failed because I think wwf was open, but I did go back and install it. For some reason now, my phone never notifies my with a wwf notification when somebody plays me. Every now and then, it might pop up when I restart the phone but that is it. I don't think facebook notifies me everytime also but was more worried about words with friends.
Searching google, it says to go into recovery mode and flash the cache of the phone there. I have done the cache memory in the phone but that has not fixed my problem. When trying to go to recovery, it never works, it would always show, recovery booting and then load the phone up as normal.
I have download quick boot and rom manager since they all have an option to boot into recovery rather than pressing the buttons but it always does the same thing. Reading the web though, it seemed like I needed to install a different recovery than the factory I guess, so using rom manager, I tried twrp and that didn't work so I installed ClockworldMod 6.0.4.7. Rom manager shows that as the current recovery method.
When I try to boot into recovery, it still shows that recovery is booting and then goes straight to loading the phone as it should normally.
Now though, every time I restart my phone, it says recovery is trying to boot but never does.
How do I fix my phone to be able to boot into recovery and it not try to boot every time it powers on. I have tried searching google but I just just can find an answer to my direct problem. I know how to hold the buttons and go to recovery but does not work, and I also know how to get to it from the different app programs(rom manager and quick boot) but they do not work either. It would be nice to get the wwf notifications to work properly again also.
If you need any information from my phone, please ask. Thanks for any help on my matter,
Charlie
Odin stock and start over.
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
creepyncrawly said:
Apparently, you are not aware that the boot loader is locked, preventing the installation of a custom kernel. You can not use twrp, or rom manager. Rom manager itself may cause issues.
I agree you should flash back to stock and start over to get a clean install. Hopefully, this will solve the issues with notifications as well. You can use the "[GUIDE]Odin to Stock, Updating, Rooting, and Installing Safestrap" by guut13 in the general forum for files and instructions.
Click to expand...
Click to collapse
Thanks for the replies guys, I really don't know a whole lot about rooting other than following instructions about it. I was unaware you could not use the twrp or cwr as a recovery. My recovery did not work before so that is why I was trying to install those. I knew you could not install custom roms but I did not know that you could not use rom manager to install custom recoveries.
I appreciate the help so far and I will look into that thread you mentioned. I haven't read it but will this take me back to stock lollipop 5.0.1 and I just reinstall apps or will I have to re-root the phone.
Charlie
please delete, sorry
Charlie
You have to go back to 4.4.4, to the nb1 base, root with towelroot, and then use the keeproot method to get back to 5.0.1 rooted. The instructions are in the guide, and also a link to the keeproot thread is there.
By the way, for future reference, questions, help and troubleshooting issues should go in the Q&A forum, not the general forum.
not having any luck
Ok guys,
I am trying to follow the guide but not having much luck.
I downloaded the I337UCUFNB1_4.4_Stock_Odin_tar and put it in the AP Odin file. I'm not sure if I should be using it or the other file named I337UCUFNB1_4.4_Rootable_Stock_Odin_tar to begin with. The instructions said to use the first one so that is the one I was trying to use.
After putting the first file in the AP slot of Odin and hitting start, it begins to try to do it's thing and then says it fails!
What do I do now? Am I doing something wrong or what because I'm trying to follow instructions but not having much luck.
Please help. Sorry for posting in the wrong area also in the beginning.
Charlie
I'm screwed
Now when I turn my phone on, it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again?
doing better now
Pretty sure I got it going finally. I changed cords and then changed ports on my computer and it finally did go back to stock without an error. I'm currently back on Lollipop and rooted so now is the fun of reinstalling contact info and anything else. So far I have not rebooted but it was not showing the recovery booting option when it did reboot. Hoping my notifications work properly now also!
Thanks!!!
Charlie
Hi all,
I'm new to rooting and modifying my Verizon S5 - so I don't have the most technical knowledge of Android nor do I have a deep understanding of related jargon yet. Recently I was able to root my phone using jrkruse's method (http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370). I then wanted to flash a new ROM - Resurrection Remix MM in particular. Through some research this seemed the best to my needs.
I understood that to do so I needed to first unlock my bootlader. So to do so I followed GeTex's post at http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909. I followed Method 1. All was well until the step of installiong Bootloader_Unlock_Safestrap.apk to my phone. After doing that and installing safestrap again like the guide said, I went to reboot my phone into recovery mode, however, initially there was only a black screen. Then, a message told me that Safestrap was disabled and gave me the options of recovery or allowing to continue. Here is a photograph of the screen (found online, not my own imagehttp://img.wonderhowto.com/img/99/57/63530107864095/0/install-custom-recovery-new-rom-your-bootloader-locked-samsung-galaxy-s4.w1456.jpg) Tapping "recovery" brought me to Safestrap and tapping "continue" made the screen black again - no Samsung or Verizon load screen followed.
Thinking that maybe this was normal, and that I had to flash one of the safestrap bootloader unlocks, I flashed SafeStrap_PD1_Bootloader_Unlock_AIO.zip as the phone was in safestrap. After that, any way of starting up my phone showed me a small message in red at the top of my screen saying my kernel was bad or broken (sorry I don't know the message verbatim - I should, but it was a while ago and I was in a hurry to have a functioning phone ASAP for work and was immediately concerned with unbricking my phone rather) a warning sign (big triangle with a !) telling me to use VZW software repair.
If anyone can pick out specifically where I went wrong, that would be great. However, as I'm a noob and there's a lot of room for error, that may be easier said than done.
It would also be helpful if someone could tell me (or link me guides) how to set up Resurrection Remix (or any other great ROM you would recommend) on an S5 G-9000V.
Also, any general advice for a noobie looking to optimize his Android would be greatly appreciated.
Thanks! Love this community for how quickly and how well they help out people with troubles like this
Bumping this, looking for help.
Would love some tips, even if they're simple general direction on how to set up this rom.
Thanks all!
jd13 said:
Bumping this, looking for help.
Would love some tips, even if they're simple general direction on how to set up this rom.
Thanks all!
Click to expand...
Click to collapse
After you have unlocked your bootloader, you should just flash the new recovery (I use TWRP) using Odin software. Once TWRP recovery is installed, boot to TWRP recovery and flash RR RoM. Just follow the RR RoM thread and choose Verizon variance.
I don't use safestrap anymore once I were able to unlock my bootloader. Just make sure that your bootloader IS IN FACT UNLOCK, before you can flasH TWRP.
johnnybg00d said:
After you have unlocked your bootloader, you should just flash the new recovery (I use TWRP) using Odin software. Once TWRP recovery is installed, boot to TWRP recovery and flash RR RoM. Just follow the RR RoM thread and choose Verizon variance.
I don't use safestrap anymore once I were able to unlock my bootloader. Just make sure that your bootloader IS IN FACT UNLOCK, before you can flasH TWRP.
Click to expand...
Click to collapse
Thanks a lot for your help, but I just did some more research and found out that my eMMC was in fact Toshiba, while I had originally thought it was Samsung. Oh well! Guess I'll stick to TW based ROMs on my firmware. I was thinking of going with MOAR Lollipop.
Hey guys!
At first, this is my first post here so please be lenient if I posted this in the wrong section or whatever. I still need to get used to this forum.
Second, English is not my native language so it could become some gibberish from time to time. I also have to mention that my Android skills are somewhere between newbie and advanced, so please keep that in mind.
But let's get ahead to my problem:
Some days ago, I decided to install Linage OS 14 on my SM-N910F because I don't like the Stock Android 6.0.1 of it.
As you know, a custom ROM requires an unlocked bootloader an that's where my struggle starts.
I simply can't find any tutorial or similar for my phone. The only one I found didn't work (It was with adb fastboot, the process got stuck at "<wating for device>" after the command "fastboot unlock oem" which was described in the tutorial).
I retried it about three or four times before I gave up. It feels like I searched the entire internet, including this forum, but I couldn't find anything useful.
Maybe it's my fault because I didn't look properly, but yeah, know I'm here to ask directly:
Do you guys have any tricks, tipps, ideas or tutorials for me to try?
If it helps you, my phone is already rooted. (chainfire's CF Autoroot)
It'd make me really, really happy and already thank you for your (hopefully) incoming answers.
Vygravlil said:
Hey guys!
At first, this is my first post here so please be lenient if I posted this in the wrong section or whatever. I still need to get used to this forum.
Second, English is not my native language so it could become some gibberish from time to time. I also have to mention that my Android skills are somewhere between newbie and advanced, so please keep that in mind.
But let's get ahead to my problem:
Some days ago, I decided to install Linage OS 14 on my SM-N910F because I don't like the Stock Android 6.0.1 of it.
As you know, a custom ROM requires an unlocked bootloader an that's where my struggle starts.
I simply can't find any tutorial or similar for my phone. The only one I found didn't work (It was with adb fastboot, the process got stuck at "<wating for device>" after the command "fastboot unlock oem" which was described in the tutorial).
I retried it about three or four times before I gave up. It feels like I searched the entire internet, including this forum, but I couldn't find anything useful.
Maybe it's my fault because I didn't look properly, but yeah, know I'm here to ask directly:
Do you guys have any tricks, tipps, ideas or tutorials for me to try?
If it helps you, my phone is already rooted. (chainfire's CF Autoroot)
It'd make me really, really happy and already thank you for your (hopefully) incoming answers.
Click to expand...
Click to collapse
Pretty certain your bootloader isn't locked, you just need to install twrp with odin and then you are good to flash lineage
sawdoctor said:
Pretty certain your bootloader isn't locked, you just need to install twrp with odin and then you are good to flash lineage
Click to expand...
Click to collapse
Thank you for your fast reply. I'll try it once again, moreover I'll let you know if it worked.
It's me again. Flashing the ROM worked, my phone now runs under Linage OS 14.1. But now I've got another problem: Gapps. Somehow I can't flash the Gapps package, TWRP always tells me that the file is corrupted. I downloaded both the Pico and the Nano package for ARM Android 7.1* devices. Both don't work. I also tried the Android 7.0.* version, but that didn't work ofcourse. (Error 20: Wrong Android version installed on the device.) Is it my fault because I downloaded the wrong packages or what's the issue?
It'd be awesome if you could help me again.
Vygravlil
EDIT:
Okay, now it works. TWRP was right, the file was corrupted. I figured out that my PC kinda messed up the download of the package. I downloaded it with another computer and now everything works fine.
Ok guys, I'm really confused. I got this phone from a friend and the backstory was that it was once rooted and running a custom rom with google play apps, but someone did a hard reset or something and it went back to stock, which is hard to believe, but that's what they're telling me. If the info is correct, that means someone successfully flashed it at some point.
I found this guide https://www.lineageosroms.org/forums/forum/samsung/galaxy-s5-china-sm-g9006v-sm-g9008v-kltechn/ and got stuck right away. I can't get TWRP to work. Odin says it's done, but all I get is the stock recovery.
I found multiple threads about this phone, but it's all very confusing to say the least and I don't know where to begin with. I hope there's someone here using it who can give me some pointers as to how I can flash this thing.
Thanks in advance.
EUREKA! I've done it. All i had to do is uncheck the auto reboot option and use the key combination for entering recovery while still in the download mode. That got me to TWRP and I was able to successfully flash the rom and gapps.
Hope that info is useful to someone else.
Guys, I'm at my wits end here. I don't know what to do. And it's driving me crazy.
After saving for 3 months, I got a used Essential Ph-1 from craigslist (for sprint). It came with Android 9, and a February 5, 2019 security patch.
All I want to do is to root the phone. And I have tried everything in my power to get it to work. It just does not. I have unlocked the bootloader, I'm seeing the device in adb and fastboot, but unable to sideload, or flash anything. I've been following different threads on here and youtube looking for directions, but my phone will just not do it.
Can someone please help me? I will send my phone over to you and pay you to have it done. I've tried almost everything to do it, and nothing works. I've even tried to flash android 8 and 7, it still doesn't do it. Someone please help me. I don't know what more i can do. Any guidance is appreciated.
Can someone please help me? I don't know what more to do. Please.
Can you temporarily boot to twrp?
Are you using fastboot.exe from the essential ph1 driver folder?
goofball2k said:
Can you temporarily boot to twrp?
Are you using fastboot.exe from the essential ph1 driver folder?
Click to expand...
Click to collapse
No. I can't sideload or boot into anything other than the android 9
I also bought my PH-1 on CL, but it was an open market version. I can only outline what I found on this forum, and what worked successfully for me... I assume you are on Windows. First off, make sure you install the drivers provided by Essential, and use adb/fastboot that comes with it (it gets installed and put into the system path when you install the drivers).
I didn't care about TWRP, so the only thing I needed was root. So, after unlocking bootloader (and also unlocking critical, as recommended), I simply followed the steps to install Magisk, which are really straightforward:
https://topjohnwu.github.io/Magisk/install.html
Just use the "Boot Image Patching" section.
That's it. Works perfectly, and I just need to repeat the patching after OTA updates (there is a thread about this procedure specifically).
If fastboot flashing doesn't work for you for some weird reason, I don't have any good ideas about that, sorry! Sounds like you are able to get into the fastboot mode (since you are saying you can see your phone in the device list), so why it wouldn't let you flash is kinda baffling...
kt-Froggy said:
I also bought my PH-1 on CL, but it was an open market version. I can only outline what I found on this forum, and what worked successfully for me... I assume you are on Windows. First off, make sure you install the drivers provided by Essential, and use adb/fastboot that comes with it (it gets installed and put into the system path when you install the drivers).
I didn't care about TWRP, so the only thing I needed was root. So, after unlocking bootloader (and also unlocking critical, as recommended), I simply followed the steps to install Magisk, which are really straightforward:
https://topjohnwu.github.io/Magisk/install.html
Just use the "Boot Image Patching" section.
That's it. Works perfectly, and I just need to repeat the patching after OTA updates (there is a thread about this procedure specifically).
If fastboot flashing doesn't work for you for some weird reason, I don't have any good ideas about that, sorry! Sounds like you are able to get into the fastboot mode (since you are saying you can see your phone in the device list), so why it wouldn't let you flash is kinda baffling...
Click to expand...
Click to collapse
I tried that too. But it kept saying unable to unpack boot image | installation failed.
I tried it with the stock images from the Essential website, both the OTA and fastboot versions. I'm getting the error for both files.
I would suggest checking out the PH1 Dev telegram group https://t.me/EssentialPH1DEV . not only will you find pre rooted stock boot images along with ones with TWRP as well you will also find help flashing them if you need it. Hope this helps you out.
Thank you everyone for all your help. Special thanks to kt-Froggy. I got it to work. I had to change my usb port from 3 to 2 and i was able to get it to work!