Currently working with magisk 17.X and 8.X Android Oreo
PLEASE READ AND FOLLOW THE DIRECTIONS TO AVOID ISSUES.
Pixel 2 XL tested and working
(If you know what your doing jump ahead to:
OVER ACHIEVER PERSON!!!)
Steps: If starting from scratch/new to this
Clean install, boot up and setup basics
Freeze/remove stock audio mods (musicFX)
Fastboot TWRP flash Magisk 17.X
(if you dont know about this STOP HERE and RESEARCH, google is your friend!)
OVER ACHIEVER PERSON!!!
From Magisk App:
-Install ViPER4Android 2.5.0.5 from magisk (vol+ 2 times)
--Reboot confirm all is working!!!!
-Next:
---Download then Install DolbyPlus-Oreo_8.1 from magisk app
-Install Audio Modification Library from magisk
--Reboot.
Good to go!!!
For Bluetooth issues install Audio Compatibility Module.
Profiles I use
https://drive.google.com/file/d/1nHxkJ41jaqH3mEaxlrt4C3gz5P25qOfF/view?usp=drivesdk
FYI if you dont back up or if you brick your device then start over. GOOGLE/XDA is your friend.
ITS NOT MY FAULT
I can confirm that it works
Not sure if this is a issue for me but i followed this guide and it worked great. The only thing is when i play music from phone to Bluetooth speaker viper driver status shows processing:No.
Im just curious if something is wrong or if thats normal.
When music is playing on phone viper driver status processing:Yes
Dielahn said:
Not sure if this is a issue for me but i followed this guide and it worked great. The only thing is when i play music from phone to Bluetooth speaker viper driver status shows processing:No.
Im just curious if something is wrong or if thats normal.
When music is playing on phone viper driver status processing:Yes
Click to expand...
Click to collapse
Mines working. See bt connect in screen shot
matt1313 said:
Mines working. See bt connect in screen shot
Click to expand...
Click to collapse
My mistake, i had my google home streaming spotify off my phone but via wifi? (found speaker on same wifi)
I connected via Bluetooth and it works perfectly.
Thank you
Was looking for dolby since own this phone, thx a lot mate
So I have this all installed and it appears to be working, I can open both up. My only question now is how do I use these? Sorry I'm fairly new to this and have never used viper or Dolby. I see in viper I'm supposed to add profiles, where do I find those and how do I know that Viper and Dolby are actually being used when I'm playing audio through my speakers or headphones?
arh09 said:
So I have this all installed and it appears to be working, I can open both up. My only question now is how do I use these? Sorry I'm fairly new to this and have never used viper or Dolby. I see in viper I'm supposed to add profiles, where do I find those and how do I know that Viper and Dolby are actually being used when I'm playing audio through my speakers or headphones?
Click to expand...
Click to collapse
Profiles you get from the web. I recommend downloading arise profiles and using one of there's. I use audiophile x.
To chexk if working. Play music, then open viper click menu/3 lines on top left click on driver status, should say processing. Means it's working.
While music playing open Dolby and the graph should be moving to the music.
If both of these are doing that then it's working.
matt1313 said:
Profiles you get from the web. I recommend downloading arise profiles and using one of there's. I use audiophile x.
To chexk if working. Play music, then open viper click menu/3 lines on top left click on driver status, should say processing. Means it's working.
While music playing open Dolby and the graph should be moving to the music.
If both of these are doing that then it's working.
Click to expand...
Click to collapse
Thank you for the response, I'm assuming audiophile x is project x correct? And so I just flash the zip for that through TWRP?
arh09 said:
Thank you for the response, I'm assuming audiophile x is project x correct? And so I just flash the zip for that through TWRP?
Click to expand...
Click to collapse
Extract the profile from the zip. Then place that in the profile folder which should be under VIPER4android in your root browser. Then open the V4A app, open the menu and select apply effect profile. You should then see, and apply your profile :good:
My dolby app keep stopping when i try to open it. Hmmm
Any idea what might gone wrong ? My Viper is installed and working fine...
otonieru said:
My dolby app keep stopping when i try to open it. Hmmm
Any idea what might gone wrong ? My Viper is installed and working fine...
Click to expand...
Click to collapse
Is viper still working? Have you updated viper and aml
matt1313 said:
Is viper still working? Have you updated viper and aml
Click to expand...
Click to collapse
I did, and viper still working,
Only dolby FC
otonieru said:
My dolby app keep stopping when i try to open it. Hmmm
Any idea what might gone wrong ? My Viper is installed and working fine...
Click to expand...
Click to collapse
Double post..
I would confirm driver installed on viper re-flash Dolby and see.
Anyone try the Ainur Sauron mod.
I am running it with Viper and Dolby. They are hardware modifications with no apps. It does contain set prop addons, which I am trying one at a time.
Warning: Do not flash Ainur first on a clean flash. Flash Viper and Dolby first. If you're already setup it should flash and boot fine.
https://forum.xda-developers.com/android/software/soundmod-ainur-audio-t3450516/post68427382
matt1313 said:
Double post..
I would confirm driver installed on viper re-flash Dolby and see.
Click to expand...
Click to collapse
It finally worked after i flash TWRP to my device first
so, basically flashing from temp TWRP cause some problem. Weird
matt1313 said:
Posted in A.R.I.S.E. forum
While we are all waiting patiently for @guitardedhero to make some magic with pixel 2's, I have been able to get V4A and DD-Atoms working. Also using Arise profiles to improve sounds.
Pixel 2 XL tested and working
Steps:
Have Magisk 14.6 installed (if you dont know about this STOP HERE and RESEARCH, google is your friend!)
Have Ahrion Materialized V4Android Magisk module installed 2.5.0.5
Reboot confirm all is working!!!!
Download on pc Dolby-Oreo.zip, for whatever reason if Downloaded on phone error 2 when trying to flash
Flash in Doly-Orep.zip in TWRP = profit.
*only issue is "Surround Virtualizer" is greyed out. Otherwise working till @guitardedhero makes a full working ARISE~
Click to expand...
Click to collapse
Dolby atmos force closes for me, any reason why? Pixel 2 stock with magisk 15.2, viper4androind work well, Oreo 8.1 tried with app to change selinux to permisive aswell but it doesn't help, any advise?
joloxx9joloxx9 said:
Dolby atmos force closes for me, any reason why? Pixel 2 stock with magisk 15.2, viper4androind work well, Oreo 8.1 tried with app to change selinux to permisive aswell but it doesn't help, any advise?
Click to expand...
Click to collapse
Check my post above.
Try to redownload dolby zip. You can do it from phone as well, but using ADM
Flash from permanent(not temporary)TWRP
otonieru said:
Check my post above.
Try to redownload dolby zip. You can do it from phone as well, but using ADM
Flash from permanent(not temporary)TWRP
Click to expand...
Click to collapse
What is adm? I have normal twrp
joloxx9joloxx9 said:
What is adm? I have normal twrp
Click to expand...
Click to collapse
Flash the Dolby zip with permanent TWRP(not the bootable .Img file). Should fix the FC of Dolby.
Sent from my Pixel 2 XL using XDA Labs
Related
hey guys, just wondering if there are any viper4android users out there and if anyone has managed to get it working on the N6P
driver wont stick for me. I miss my EQ!
This post helped out in the nexus 5x forums,
Post- http://forum.xda-developers.com/showpost.php?p=63486621&postcount=7
richie.slayer said:
This post helped out in the nexus 5x forums,
Post- http://forum.xda-developers.com/showpost.php?p=63486621&postcount=7
Click to expand...
Click to collapse
Thanks! worked for me.
I was able to get it installed using the steps in the 5X forum, but only works in compatibility mode. Has anyone got it working in normal mode?
edd247 said:
I was able to get it installed using the steps in the 5X forum, but only works in compatibility mode. Has anyone got it working in normal mode?
Click to expand...
Click to collapse
nope... would really really hope someone figures this out. viper is a must have for me. #2 reason to why I must root my phones.
johnp357 said:
nope... would really really hope someone figures this out. viper is a must have for me. #2 reason to why I must root my phones.
Click to expand...
Click to collapse
Yep, mine is running in normal. I do have SELinuxModeChanger set to permissive. Did you try that? Did you disable musicFX? Besides that I did exactly what was listed in the nexus 5x set-up.
veggicide said:
Yep, mine is running in normal. I do have SELinuxModeChanger set to permissive. Did you try that? Did you disable musicFX? Besides that I did exactly what was listed in the nexus 5x set-up.
Click to expand...
Click to collapse
where is the musicFX disable option? looked everywhere on the 6p and couldn't find it??
well, I don't know why but it seems to work now... without locating the musicFX disable option... followed the direction like on the link for the nexus 5 but also installed selinuxmodechanger and set to permissive. that seemed to work.
veggicide said:
Yep, mine is running in normal. I do have SELinuxModeChanger set to permissive. Did you try that? Did you disable musicFX? Besides that I did exactly what was listed in the nexus 5x set-up.
Click to expand...
Click to collapse
I am using systemless root and the selinuxmodechanger app does not work with this root method, so I used the permissive zip from flar2. I disabled musicfx and it still wont work in normal mode
---------- Post added at 09:35 AM ---------- Previous post was at 09:34 AM ----------
johnp357 said:
where is the musicFX disable option? looked everywhere on the 6p and couldn't find it??
Click to expand...
Click to collapse
go to settings, apps, then hit menu in top right, press show system, then scroll to find musicfx, then press disable
[/COLOR]
go to settings, apps, then hit menu in top right, press show system, then scroll to find musicfx, then press disable[/QUOTE]
changing musicfx back and forth didn't change the sound. but I know that the sound changed following the instructions and adding permissive option on selinux so maybe removing the file from the directory affected this?
I also followed the steps from the 5x forum and I am unable to get the driver to stick. I am rooted the non systemless way.
I had to use rootbrowser to delete the audio_effects.conf permanently. Once I did that, it worked
Sent from my Nexus 6P using Tapatalk
rpinnocent said:
I had to use rootbrowser to delete the audio_effects.conf permanently. Once I did that, it worked
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Where is this file located? Also where is the viper for Android apk located?
Sent from my Nexus 6P using XDA Free mobile app
It works for me in Google Play Music but not in PowerAMP, also only with Compatible mode.
I wish it worked perfectly fine
shinta86 said:
I also followed the steps from the 5x forum and I am unable to get the driver to stick. I am rooted the non systemless way.
Click to expand...
Click to collapse
Same here, can't get the driver to stick
bsg411 said:
Where is this file located? Also where is the viper for Android apk located?
Sent from my Nexus 6P using XDA Free mobile app
Click to expand...
Click to collapse
File is located in system/vendor/etc and the apk is in the OP
Sent from my Nexus 6P using Tapatalk
Does viper4android give us system wide audio control? Such as allowing us to change the gain on the top/bottom speakers?
Edit: Dw I found out it does. Just need to root and get it now then.
I'm having constant problems keeping this working. I did everything told in http://forum.xda-developers.com/showpost.php?p=63486621&postcount=7 yet every other day I get the issue of going into Google Music, playing music, and when I try to go to settings to get to Viper EQ, the music stops and Viper tells me all of a sudden that the driver isn't installed again (when it definitely was and was working fine).
Also, lately when I go into the SELinuxModeChanger app, it shows Enforcing is chosen, even right after I change it to Permissive. It keeps changing back on its own, even after root permissions are granted.
This wasn't happening until recently.
Running Elemental X's kernel if that matters.
Any ideas?
So I couldn’t wait any more so this weekend I rooted and got my Viper ON. Viper is one of the main reasons that I root. This is what I did:
1) I get TWRP and rooted by doing this:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
2) Now that I’m rooted, I get busy box working
3) I didn’t need to change my SEL Mode by doing this.
4) I Boot into TWRP and I flashed the attach zip. “ViPER4Android-supolicy.zip”
5) Disable MusicFX and then I went into system/vendor/etc and killed “audio_effects.conf”
6) Open Viper and install best Driver
7) I had to re-flash the zip 2-3 times without wiping before I got it working.
Now my 6P is on MDB08M, Crypted, enforcing mode with TWRP and rooted with Viper.
edit: here more info about the the attached zip:
http://forum.xda-developers.com/showthread.php?p=61242973#post61242973
boxcar8028 said:
So I couldn’t wait any more so this weekend I rooted and got my Viper ON. Viper is one of the main reasons that I root. This is what I did:
1) I get TWRP and rooted by doing this:
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
2) Now that I’m rooted, I get busy box working
3) I didn’t need to change my SEL Mode by doing this.
4) I Boot into TWRP and I flashed the attach zip. “ViPER4Android-supolicy.zip”
5) Disable MusicFX and then I went into system/vendor/etc and killed “audio_effects.conf”
6) Open Viper and install best Driver
7) I had to re-flash the zip 2-3 times without wiping before I got it working.
Now my 6P is on MDB08M, Crypted, enforcing mode with TWRP and rooted with Viper.
edit: here more info about the the attached zip:
http://forum.xda-developers.com/showthread.php?p=61242973#post61242973
Click to expand...
Click to collapse
thanks, this worked great for me but I don't have music fx to disable.
I managed to get it rooted using SU and TWRP. Now the whole reason I went through that hassle is for this great V4A I've been hearing about... can someone PLEASE help me get this to work?
Install magisk then the V4A module.
http://forum.xda-developers.com/showthread.php?t=3475381
ashyx said:
Install magisk then the V4A module.
http://forum.xda-developers.com/showthread.php?t=3475381
Click to expand...
Click to collapse
Ive moved on.
Having rooted my ****, I was able to delve deeper into the conspiracy that is nuplayer and awesomeplayer and the fact that they take away effects from streaming sources. Got it fixed I think, now I can enjoy extreme quality Spotify with adaptsound
ashyx said:
Install magisk then the V4A module.
http://forum.xda-developers.com/showthread.php?t=3475381
Click to expand...
Click to collapse
Installed Magisk... then V4A... driver installs but says abnormal.
sovereignjerk said:
Installed Magisk... then V4A... driver installs but says abnormal.
Click to expand...
Click to collapse
Did you install the module via the Magisk manager?
ashyx said:
Did you install the module via the Magisk manager?
Click to expand...
Click to collapse
Just realized I forgot the manager, trying again.
ashyx said:
Did you install the module via the Magisk manager?
Click to expand...
Click to collapse
Did it with the manager, it shows i got it but i cant find the app
ashyx said:
Did you install the module via the Magisk manager?
Click to expand...
Click to collapse
Figured it all out finally, got it working! Had to delete SoundAlive but I think it's worth it..
sovereignjerk said:
I managed to get it rooted using SU and TWRP. Now the whole reason I went through that hassle is for this great V4A I've been hearing about... can someone PLEASE help me get this to work?
Click to expand...
Click to collapse
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research of this topic on your own before you take a look at it. YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you, all, at the same time.
Ok, I have seen the problem, when you first download TWRP in Download Mode, you have to make it reboot to your device's lockscreen.
After you have done that download SuperSU from here: https://download.chainfire.eu/1003/SuperSU/SR1-SuperSU-v2.78-SR1-20160915123031.zip
Go back to Recovery Mode and flash this file from the desired location you have put the .zip in.
Then reboot the whole system. (TWRP cannot process a lot of flashes of files at once! It crashes the system!)
Download ViPER4Android from here: ViPERAudio 5.5 Sony Beats Edition.zip
Then go to Recovery Mode again then flash this file.
After the reboot, open up the app and the app will say Drivers need to be installed. Install it and give the app root access. Then, you have to reboot it after it says Drivers Installed. Reboot.
REBOOT!
After that, go to the app and press the three dot menu on the right top corner and press compatibility mode and then press Compatible not Normal.
Then try playing a song and activate the app for SoundFX. If it does not work, then reply back and I will help you.
If it doesn't work and you want to fix it yourself, find a Permissive Kernel for the device and install it. ViPER4Android works on Enforcing and Permissive but it works on Permissive better.
Peace Out. Hope I helped.
I have a Samsung Galaxy Tab A6 SM-T280 I have no idea when it comes to all this booting rebooting stuff but I like this kind of stuff and would want to learn more. Now my tablet is FRP locked. A google account bypass is what is wrong with the tablet can someone please tell me how to fix this I really want to know. Thank you in advance.
Btw, you dont suck. You said you did In the title, but you dont.
I found the speakerphone is very weak so I wanted to increase volume of it. I searched and found Viper4android could do it. I tried Viper4android apk but its driver never installs. Then I tried the Magisk module but it does not work either. Does anyone know how to get Viper4android installed?
blizhu said:
I found the speakerphone is very weak so I wanted to increase volume of it. I searched and found Viper4android could do it. I tried Viper4android apk but its driver never installs. Then I tried the Magisk module but it does not work either. Does anyone know how to get Viper4android installed?
Click to expand...
Click to collapse
Install viper from Magisk, reboot twice and it should work.
Thanks. I guess I only rebooted once when I tried it earlier.
shooterlgk said:
Install viper from Magisk, reboot twice and it should work.
Click to expand...
Click to collapse
blizhu said:
Thanks. I guess I only rebooted once when I tried it earlier.
Click to expand...
Click to collapse
So it worked?
shooterlgk said:
So it worked?
Click to expand...
Click to collapse
Yes. All Magisk modules did not work at the first reboot. And everything including Viper worked after after the second reboot.
blizhu said:
Yes. All Magisk modules did not work at the first reboot. And everything including Viper worked after after the second reboot.
Click to expand...
Click to collapse
Glad I can help
shooterlgk said:
Glad I can help
Click to expand...
Click to collapse
Which Viper did you guys choose? There are 3 available. I had the Viper app but the driver was installed but not working even after multiple reboots. Any advice appreciated. I chose the Viper for Magisk 14+
Need my Viper! Also,I imagine USB/Dock should help the headset output, not headset, correct?
Update- removed the Magisk 14+ version and installed the 2.3.4. 2.5 failed as well. 2.4.3 says that it's working but I hear absolutely nothing when adjusting settings. If one of ya'll could tell me precisely what you did to get this upand running I would be most grateful.
I have Viper4Android installed in the phone, and it works sometimes, but for reasons I don't know, the app sometimes just don't work at all, or turns off, and it's really hard to turn it on back again.
Anyone knows how to make it so it never turns off? The app itself doesn't have too many options regarding of when it turns on...
(I'm using magisk, and riru core xposed)
xchikyx said:
I have Viper4Android installed in the phone, and it works sometimes, but for reasons I don't know, the app sometimes just don't work at all, or turns off, and it's really hard to turn it on back again.
Anyone knows how to make it so it never turns off? The app itself doesn't have too many options regarding of when it turns on...
(I'm using magisk, and riru core xposed)
Click to expand...
Click to collapse
Try with this one it worked for me..
1. uninstall all audio mods from Magisk
2. reboot
3. install latest AML
4. reboot
5. install ViPER in Magisk
6. reboot
7. install ViPER apk, allow all permissions, install driver
8. reboot
9. install any other audio mods
is AML Audio Modification Library?
xchikyx said:
is AML Audio Modification Library?
Click to expand...
Click to collapse
Yes.
bkma said:
Yes.
Click to expand...
Click to collapse
I'll install it and see how it goes, thank you
Does anyone got a chance to install dolby atmos (rooted) on your nothing? I am afraid to brick my phone again
1/ Install Magisk Bootloop Protector
This module can prevent a bootloop/can't boot system if a unstable/conflict/incompatible module.
2/ Reboot
3/ Install AudioWizard-DTSXUltra-AsusZen6-MagiskModule v5.5-Stable
On my Mi 11 it's the only working Audio Module working perfectly and exactly same feeling quality than Dolby Atmos.
I will test as soon i will receive my Nothing 1 in a few days
Pho3nX said:
1/ Install Magisk Bootloop Protector
This module can prevent a bootloop/can't boot system if a unstable/conflict/incompatible module.
2/ Reboot
3/ Install AudioWizard-DTSXUltra-AsusZen6-MagiskModule v5.5-Stable
On my Mi 11 it's the only working Audio Module working perfectly and exactly same feeling quality than Dolby Atmos.
I will test as soon i will receive my Nothing 1 in a few days
Click to expand...
Click to collapse
i can confirm it works on the nothing phone.
edit: cant hear any difference.
This version works.
P6P said:
i can confirm it works on the nothing phone.
edit: cant hear any difference.
This version works.
Click to expand...
Click to collapse
Yes the Dolby Atmos is working on the Nothing phone and I like it!
Karun_Thomas said:
Yes the Dolby Atmos is working on the Nothing phone and I like it!
Click to expand...
Click to collapse
Problem to download file from Pling. Any solution, please!
lassetth said:
Problem to download file from Pling. Any solution, please!
Click to expand...
Click to collapse
You need to click on Download to right of the page and then go to the bottom of the download menu and select the latest version
AudioWizard-DTSXUltra-AsusZen6-MagiskModule-20220702180144zip
Sib64 said:
You need to click on Download to right of the page and then go to the bottom of the download menu and select the latest version
AudioWizard-DTSXUltra-AsusZen6-MagiskModule-20220702180144zip
Click to expand...
Click to collapse
Thanks, I found out, the get into not compliting the det up, do have to flash a stock boot img.
I then have to uninstall the Audio W after thst flash pstched boot img.
Karun_Thomas said:
Yes the Dolby Atmos is working on the Nothing phone and I like it!
Click to expand...
Click to collapse
I can`t get any of this to apk working. Dolby goes hanging and AudioW start reboots (Bootloop protecter installed)
lassetth said:
I can`t get any of this to apk working. Dolby goes hanging and AudioW start reboots (Bootloop protecter installed)
Click to expand...
Click to collapse
Working perfectly for me. Dolby Atmos module or DTSX module.
And DSP working, not placebo, you can easily hear the difference, especially on the Dolby Atmos module.
Pho3nX said:
Working perfectly for me. Dolby Atmos module or DTSX module.
And DSP working, not placebo, you can easily hear the difference, especially on the Dolby Atmos module.
Click to expand...
Click to collapse
I reinstalled DA, once more the same result, random reboots every 15 sec.
From where did you dawnload your DA?
lassetth said:
I reinstalled DA, once more the same result, random reboots every 15 sec.
From where did you dawnload your DA?
Click to expand...
Click to collapse
If you follow all the post above, from This Link and select this version:
AudioWizard-DTSXUltra-AsusZen6-MagiskModule-20220702180144.zip
Sib64 said:
If you follow all the post above, from This Link and select this version:
AudioWizard-DTSXUltra-AsusZen6-MagiskModule-20220702180144.zip
Click to expand...
Click to collapse
Thanks!
Sib64 said:
If you follow all the post above, from This Link and select this version:
AudioWizard-DTSXUltra-AsusZen6-MagiskModule-20220702180144.zip
Click to expand...
Click to collapse
The insatllation was ok, the apk starts up but I was not able to test. The problem was that screen brightness was vey low and could not change. Uninstall module and all was normal.