Related
So...you wanted to push the limit of your Le 1 Pro (x800) phone and install a newer ROM, but surprise...you bricked your phone?! Welcome to the solution...
Requirements:
-Hard-bricked Le 1 Pro, aka x800 (HARD BRICKED = Nothing comes up, no Penguin [fastboot], no Recovery)
-Windows Computer (I used Windows 7 32-bit, but Win8/10 32/64-bit should also work fine.)
-USB Type-C Data/Charge cable
-Qualcomm QPST 2.7 Build 429 (older versions such as 422 or 427 DO NOT WORK, I've tried.)
-Qualcomm Drivers
Review this link: http://www.droidsavvy.com/unbrick-qualcomm-mobiles/ (It talks about putting the computer in test mode and removing all existing drivers...either of which may or may not be required. If you run into trouble, try some of the things from this link!!)
Steps:
1) Download this zip file (contains everything you need): https://mega.nz/#!KthDlSxD!deEIr2y0PAPcPC4CHUSP2zInbBJ5VgBJpWa1B0PYhv0 (1.33GB File Size)
2) Unzip it.
3) Install "QPST.2.7.429.msi".
4) Plug-in phone and install applicable drivers from "Qualcomm_Drivers" folder (x86 = 32-bit, x64 = 64-bit).
5) From your computers applications folder, run "QFIL".
6) At the top, it should say something like "Qualcomm HS-USB QDLoader 9008 (COM3)". (If not try holding the phone's power button for maybe 5-20 seconds. If that doesn't work, see the above link about running your computer in test mode, uninstalling existing drivers, etc.)
6) Choose "Flat Build".
7) Click "Browse..." and choose prog_emmc_firehose_8994_lite.mbn from the "x1_na_dvt1_fastboot" folder.
8) Click "Load XML..." and choose rawprogram_unsparse.xml and when prompted, patch0.xml from the "x1_na_dvt1_fastboot" folder.
9) Click "Download" and let the fun begin.
FYI: Please DO NOT use the rom as-is. This is an early Chinese prototype rom, not a daily driver. Seek help/links from other users to install a different ROM. Perhaps in the future I'll have something better for you.
Disclaimer:
Apologies ahead of time if I don't have time to help you all troubleshoot. This is a complex process and although I've tried to make it easier, there will probably be some speed-bumps...like everything in life. Like you, this has already sucked up a lot of time and energy. I truly hope that those who are successful can help others! Best of luck to you!
So this is for the 64 GB US-Version?
Anyone tried it yet?
t0wlie said:
So this is for the 64 GB US-Version?
Anyone tried it yet?
Click to expand...
Click to collapse
Yes, 64GB NA version. Unknown if it works for other iterations.
Can you please upload the zip file on a most reliable site? I think is the fourth time I try to dowload it and everytime connection broke. Thank you!
Thanks a lot
Thanks a lot. I finally unbricked my phone.
However, the storage became 8gb, blue notification light is constantly on, etc.
Any suggestions how to fix them?
Installed cuoco92 rom but no success on the abovementioned problems.
Wanted to wipe internal storage when installing rom but usb otg shows 0 mb in twrp. Cannot flash zip from usb.
Sucess!!!! I debricked it! Thak you viperdream26. The phone now boots directly to recovery. Which recovery/rom did you flash? I dont want to mess this up again...
Guys please upload the zip on another site. I cannot download it using the link provided by viperdream. Thank you!
yadi.sk/d/KtcTvu6jsHA4g
Thank you!
Well, i did brick my x800 too, but i manage to instal the trwp, its working, i didnt flash any rom, but, i got it bugged instaling twrp...
Now im on recovery loop, how can i get out of this recovery and boot ?
First of all big thanks to viperdream26 !
Same here as Makvelli - 10:44.
Phone only boots in Chinese recovery and then nothing else, can't do anything in this recovery. Does anyone know how to proceed ?
I was to quick with my response ! Phone boots ok, bootanimation is absent (only LETV with underneath two Chinese lines) and the rom is multi-langual.
Rom : Build-number 0.3-20150630-20-test-keys.
Well, now phone reboots every 5 minutes !
I suppose this rom isn't the US version ?
Operation went fine and I got a successful message. Now I have the chinese LeTv recovery!
Bossie12 said:
First of all big thanks to viperdream26 !
Same here as Makvelli - 10:44.
Phone only boots in Chinese recovery and then nothing else, can't do anything in this recovery. Does anyone know how to proceed ?
I was to quick with my response ! Phone boots ok, bootanimation is absent (only LETV with underneath two Chinese lines) and the rom is multi-langual.
Rom : Build-number 0.3-20150630-20-test-keys.
Well, now phone reboots every 5 minutes !
I suppose this rom isn't the US version ?
Click to expand...
Click to collapse
I had the same problem. I put the phone in download mode (volume down and power button till I saw that peungine again). Kinda missed him since my phone was in coma for a week . Then i flashed the twrp 3.0.2 again and now I'm going to wait for maybe cuoco92 to help us with some ideas what to do next? Did anybody tried to flash his custom rom for us x800 13s?
after the restoration of this method it is necessary to update the firmware via fastboot! Firmware is here to see prices yadi.sk/d/lIMbN-bbsHRbT
oleg.cheletemov said:
after the restoration of this method it is necessary to update the firmware via fastboot! Firmware is here to see prices yadi.sk/d/lIMbN-bbsHRbT
Click to expand...
Click to collapse
Please could you explain to update with this firmware through fastboot. Thank you.
there is a video www.dropbox.com/sh/00hsiy8w99zivwm/AACh_5T7u4r08N_Guj7-rGu4a?dl=0
To get your international ROM, partition layout and everything back , just do this:
teorouge said:
Download https://www.dropbox.com/s/109hyb9w7cqnxl3/160519-x1_na_fastboot_Lang_EKL.rar?dl=0 unzip, go fastboot (power+vol up) and run the batch file x1_na_fastboot.bat. I did solve guys, good as new! Thanks @viperdream26 !
Click to expand...
Click to collapse
Cheers!
oleg.cheletemov said:
there is a video www.dropbox.com/sh/00hsiy8w99zivwm/AACh_5T7u4r08N_Guj7-rGu4a?dl=0
Click to expand...
Click to collapse
Yes !!! This is what i was searching for ! Thank you so much. My phone is alive again.
hi guys i really need your help.
i bricked my x800 yesterday and i am trying to get it back alive.
i used qfil with the given files at the right place and hit download..
qfil says com port number 5
switch to edl
download fail switch to EDL fail failed to switch to emergency download mode
finish download
please help, it is way beyond my knowledge
: i managed to get qualcomm hs-usb qdloader 9008 in qfil and i am stucked ..
download fail sahara fail sahara fail
Do we have any custom rom and TWRP for Us version? Thanks for bringing my phone back to life!
EDIT: SOLUTION (Not a fix)
For those who are stuck at "50% saying current account is different from the a/c info of device"
It is due to the database miss-match in their server ,the possible sollution are :
Remember: for MediaTek devices you will have to first flash a China Dev ROM onlu then you can get the unlock successful.
But this is not a recommendation for Qualcomm Devices.
1. Go to i.mi.com and look weather your device shows up in the find device (this is required only to be sure as to your device is connected to their server and they have updated the info on your Device too).
2. Reset your Phone sign in and turn on find device. turn on usb debug and oem unlock connect to pc allow whatever is asked on your phone also check always trust, then open adb folder and open cmd there and type adb devices your phone will ask for authorisation allow it and check always trust.
3. Mail your concern with user ID and also the snapshot of the error as they will ask for it,to your regional service (I am an indian so i had to mail it at [email protected])(just google contact xiaomi) wait for their reply.
You can PM these persons on MIUI forum regarding the 50% stuck issue.
{ EDIT 2:
You may contact these person in MIUI forum:
1) vincent_khoo
2) PatrickXi
( @bravonova gave me these names you may try I haven't cross checked as mailing will most probably solve) }
The last method should Work for everyone as it's a db miss-match which should be fixed after this.
PS: This a solution and not a fix so it will take time.
PPS: Don't blame me for all the trouble Blame Xiaomi.
ilvmyname said:
Ok, so I have been trying to move to miui 8 global beta version now for a long time and haven't succeeded, the updater app says could not verify update package.
I have a pretty good net connection so that's not an issue.
Also If I try download latest rom it says "Can't download update, wait a minute or two" and this it has been saying for about a week now (ironic).
So, I requested for unlocking the bootloader got the confirmation messages after 3 days tried to unlock now stuck at 50% saying "account is different from the account in the phone info"
I don't want to use the fast boot edl method of flashing rom as my lappy keeps getting sudden shutdown, so I don't want it to shutdown in between and get hard bricked.
I have tried MiPc suit but since it cannot do a backup(again app bug) so cannot flash through it.
I have looked in to the mi cloud and my phone does gets located.(possible solution given for unlock bootloader but even that didn't work).
Can anyone please help me on this or will I have to be on this ****ty unrooted Rom forever.
Currently on miui 7.5.3.0 global stable rom.
Any suggestions will be appreciated ty
Click to expand...
Click to collapse
I unlocked it just today!make sure all drivers are installed..boot into fastboot mode :- power off then hold vol down + power button.w8 for the drivers to get installed
Now boot into recovery mode :- turn off device and hold volume up + power button.w8 for the drivers to get installed.
I was stuck at the same 50% error..one of d xda member told me to boot into recovery mode and let the drivers get installed and taddaa...bootloader unlocked
Make sure u r logged in to the same account in ur phone u r using to unlock the bootloader
I fixed this by updating to latest version in miui app in fastboot mode.
Same problem for me. I tried using the MIUI PC Suite, it tells me my phone isnt up to date even though it is. Recovery mode drivers fail. Requested unlock over 2 weeks ago and got the SMS 9 day ago... still stuck at 50% error. Its driving me nuts.
Warrimonk said:
Same problem for me. I tried using the MIUI PC Suite, it tells me my phone isnt up to date even though it is. Recovery mode drivers fail. Requested unlock over 2 weeks ago and got the SMS 9 day ago... still stuck at 50% error. Its driving me nuts.
Click to expand...
Click to collapse
i today unlocked my bootloader...try doing this go into recovery mode by pressing power+volumeup button. You will see a picture telling you to connect ur phone to pc using usb cable..connect your phone to your pc now w8 and let the drivers get installed and try again..i did dis and unlocked it today before that i was getting the same error even today got the same error before doing this.
hitesh1792 said:
i today unlocked my bootloader...try doing this go into recovery mode by pressing power+volumeup button. You will see a picture telling you to connect ur phone to pc using usb cable..connect your phone to your pc now w8 and let the drivers get installed and try again..i did dis and unlocked it today before that i was getting the same error even today got the same error before doing this.
Click to expand...
Click to collapse
First of all thanks for the reply sir but
I tried entering to recovery mode and then connect to pc but nothing happens, I mean it does not show connected even after say 5 minutes.
Although when trying to enter into the fastboot mode and then connecting to pc the drivers do get install and it shows connected and stucks at 50%
I do have adb drivers RN3 USB drivers installed on my pc
But all things in vain.
Garyj881 said:
I fixed this by updating to latest version in miui app in fastboot mode.
Click to expand...
Click to collapse
I am sorry sir but I didn't get you, you updated to latest version of miui through the updater app right? And then entered to fastboot mode to unlock right?
My updater app also doesn't work It says cannot verify update package and so I am stuck like from all corners.
ilvmyname said:
First of all thanks for the reply sir but
I tried entering to recovery mode and then connect to pc but nothing happens, I mean it does not show connected even after say 5 minutes.
Although when trying to enter into the fastboot mode and then connecting to pc the drivers do get install and it shows connected and stucks at 50%
I do have adb drivers RN3 USB drivers installed on my pc
But all things in vain.
Click to expand...
Click to collapse
Are you able to see this pic on your device when you enter recovery mode??
hitesh1792 said:
Are you able to see this pic on your device when you enter recovery mode??
Click to expand...
Click to collapse
Yes
ilvmyname said:
Yes
Click to expand...
Click to collapse
connect your device to your pc and let the drivers get installed...and if u are using a desktop pc do not use the usb port which is at the front of the cpu..use the one which are at the back of the cpu...the image i am attaching shows which drivers get installed.
after drivers get installed remove usb cable and again boot into fastboot mode (power + volume down ) and try again to unlock bootloader
hitesh1792 said:
connect your device to your pc and let the drivers get installed...and if u are using a desktop pc do not use the usb port which is at the front of the cpu..use the one which are at the back of the cpu...the image i am attaching shows which drivers get installed.
after drivers get installed remove usb cable and again boot into fastboot mode (power + volume down ) and try again to unlock bootloader
Click to expand...
Click to collapse
Okay, so i am missing drivers i guess.
Have you pre installed any drivers if so can you provide me a link?
as when i connect into recovery mode only the bootloader interface driver get install and nothing else and hence it still doesn't show connected in the recovery mode.
ilvmyname said:
Okay, so i am missing drivers i guess.
Have you pre installed any drivers if so can you provide me a link?
as when i connect into recovery mode only the bootloader interface driver get install and nothing else and hence it still doesn't show connected in the recovery mode.
Click to expand...
Click to collapse
strange!bootloader interface driver gets installed when connected in fastboot mode..uninstall that driver connect your phone in recovery mode and see if dese drivers get installled..nope i do not have any link because as soon as i connected my phone into recovery mode the drivers automatically got installed!
ps :- i was able to unlock bootloader after flashing kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000.23_5.1_global_f5889c1549
i too have the same problem !! if you got the solution please tell me !!
T/[email protected]$ said:
i too have the same problem !! if you got the solution please tell me !!
Click to expand...
Click to collapse
i was able to unlock the bootloader after flashing kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000 .23_5.1_global_f5889c1549...
i was not able to unlock it before i connected my phone into recovery mode and installed the drivers on my pc..as soon i did it the bootloader got unlocked .before that i was getting the same error even after flashing the V7.3.7.0.LHOMIDD firmware
hitesh1792 said:
i was able to unlock the bootloader after flashing kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000 .23_5.1_global_f5889c1549...
i was not able to unlock it before i connected my phone into recovery mode and installed the drivers on my pc..as soon i did it the bootloader got unlocked .before that i was getting the same error even after flashing the V7.3.7.0.LHOMIDD firmware
Click to expand...
Click to collapse
how to flash kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000 .23_5.1_global_f5889c1549.?
when i connect my device in recovery mode nothing happens
For Kenzo / SD / Snapdragon only.
1. Install Mi PC Suite, plug your phone in and install the app on the phone when it prompts (then close mi pc suite) - this provides all the drivers needed for the next step
http://en.miui.com/thread-92720-1-1.html < Mi PC Suite
2. reboot the phone to recovery mode ( Vol UP + Power ), let drivers install on pc - wait, then reboot again to fastboot mode (VOL Down + Power) let drivers install on pc - wait - it might take a few minutes to install the drivers don't unplug the phone during this time.
3. download and install the unlock tool - log into your account, after it checks you have permission press unlock
http://en.miui.com/unlock/ < unlock tool
----------------------------
(if it still fails proceed to next step)
4. use xiao mi flash beta and install the latest kenzo global fast boot image (I have heard some people needed to use the Chinese dev firmware- the global stable worked for me though), use the clean all option selected at the bottom of mi flash. (this will erase ALL data on the phone)- backup before doing this.
http://en.miui.com/thread-281979-1-1.html <- xiao mi flash beta
5. let phone boot up first time, log into the mi account on the phone with your email / password, if your phone number doesn't work then select option to log in with email / password.
6. reboot to fastboot again and press unlock it should proceed now
Do at own risk I am not responsible for bricked devices.
T/[email protected]$ said:
how to flash kenzo_global_images_V7.3.7.0.LHOMIDD_20160523.0000 .23_5.1_global_f5889c1549.?
when i connect my device in recovery mode nothing happens
Click to expand...
Click to collapse
it must install the drivers...please do check out the steps mentioned above by the xda member "otyj" he helped me to unlock my bootloader
I had the same problem and believe me I did everything possible as you are also advised in this forum.
But it had nothing to do with this.
Just wait and watch.. try everyday once and I think you will get in 7-10 more days.
I was also frustated at that time but now I can unlock everysingle time I want when it gets locked.
otyg said:
For Kenzo / SD / Snapdragon only.
1. Install Mi PC Suite, plug your phone in and install the app on the phone when it prompts (then close mi pc suite) - this provides all the drivers needed for the next step
http://en.miui.com/thread-92720-1-1.html < Mi PC Suite
2. reboot the phone to recovery mode ( Vol UP + Power ), let drivers install on pc - wait, then reboot again to fastboot mode (VOL Down + Power) let drivers install on pc - wait - it might take a few minutes to install the drivers don't unplug the phone during this time.
3. download and install the unlock tool - log into your account, after it checks you have permission press unlock
http://en.miui.com/unlock/ < unlock tool
----------------------------
(if it still fails proceed to next step)
4. use xiao mi flash beta and install the latest kenzo global fast boot image (I have heard some people needed to use the Chinese dev firmware- the global stable worked for me though), use the clean all option selected at the bottom of mi flash. (this will erase ALL data on the phone)- backup before doing this.
http://en.miui.com/thread-281979-1-1.html <- xiao mi flash beta
5. let phone boot up first time, log into the mi account on the phone with your email / password, if your phone number doesn't work then select option to log in with email / password.
6. reboot to fastboot again and press unlock it should proceed now
Do at own risk I am not responsible for bricked devices.
Click to expand...
Click to collapse
where can i find fastboot images ?
and when i plugin in recovery mode nothing happens !!
and your were telling that app will be installed in phone when we connect wiith mi pc suit, can you clearly explain it ?
otyg said:
For Kenzo / SD / Snapdragon only.
1. Install Mi PC Suite, plug your phone in and install the app on the phone when it prompts (then close mi pc suite) - this provides all the drivers needed for the next step
http://en.miui.com/thread-92720-1-1.html < Mi PC Suite
2. reboot the phone to recovery mode ( Vol UP + Power ), let drivers install on pc - wait, then reboot again to fastboot mode (VOL Down + Power) let drivers install on pc - wait - it might take a few minutes to install the drivers don't unplug the phone during this time.
3. download and install the unlock tool - log into your account, after it checks you have permission press unlock
http://en.miui.com/unlock/ < unlock tool
----------------------------
(if it still fails proceed to next step)
4. use xiao mi flash beta and install the latest kenzo global fast boot image (I have heard some people needed to use the Chinese dev firmware- the global stable worked for me though), use the clean all option selected at the bottom of mi flash. (this will erase ALL data on the phone)- backup before doing this.
http://en.miui.com/thread-281979-1-1.html <- xiao mi flash beta
5. let phone boot up first time, log into the mi account on the phone with your email / password, if your phone number doesn't work then select option to log in with email / password.
6. reboot to fastboot again and press unlock it should proceed now
Do at own risk I am not responsible for bricked devices.
Click to expand...
Click to collapse
Okay I will try flashing a rom through MiFlash toll b'coz the above methods didn't work and will quote if that's how it gets fixed
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
kremmit said:
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
Click to expand...
Click to collapse
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
kremmit said:
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
Click to expand...
Click to collapse
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
franciscobcl said:
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
Click to expand...
Click to collapse
I'm out of ideas at this point.
I had some trouble with fastboot that my phone did restart when in fastboot mode.
Then i had to change the order of plugging in the cable and starting the program but after that all worked.
No idea what next ...
I had this issue with a Redmi 3. I can't remember the exact solution but I believe you have to have the developer ROM installed in order to unlock the bootloader. Maybe if you search for an anterior model such as the Redmi 3 you will find more information on how to load your ROM. I'm sure that it's the same method for most Xiaomi phones. Good luck!
I heard about do a Hard Reset but i dont know how to do that because i cant access to the OS of the xiaomi.
Is there a way to do a hard reset with the xiaomi stucked on Mi logo?
Tks!
Happy 2017 for all!
I tried to put my phone one Recovery Mode but it is blocked. Its like the phone on this video:
https://www.youtube.com/watch?v=tTzdQpex7BQ
How can i unlock this?
I never could get into the xiaomi recovery either but i managed to flash twrp through fastboot though.
franciscobcl said:
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
Click to expand...
Click to collapse
Hi
Does your problem with sp flashtools and flashing the ROM be solved ?
Sent from my Redmi Pro
I had this problem, but I'd installed TWRP already. But you shouldn't need USB Debugging on to flash TWRP. If you manage to flash TWRP, flash a new ROM (I recommend xiaomi.eu (I think they have Portuguese)) and wipe the Dalvik cache, /cache, and /data (you probably won't have to wipe /data/media).
Miui themes
Sorry will start new item
Have you tried a different cable, that is why mine wasn't recognized at first.
I'm having the same problem here. The phone rebooted itself when I changed the locale, and hung at the Mi logo. I already had TWRP flashed. I also took the opportunity to install a new ROM; the Global Dev ROM. It installed with no errors and I wiped the Dalvik, cache, etc. Still hangs at the Mi logo, but this time without the little loading dots at the bottom. Any suggestions?
Update: I can bring it back to the original state with the loading dots and "powered by Android" at the bottom with a backup I took before flashing the new rom, but still no progress.
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Phosphenes said:
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Click to expand...
Click to collapse
What I did bro ?
I still have the same problem?
franciscobcl said:
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
Click to expand...
Click to collapse
You could try dowloading the official rom and then download the CHINESE version of mipc suite then enter fastboot and connect the phone
Normally the chinese mi pcsuite automaticly detects the phone is in fastboot mode, you could use google translate to translate it all just choose redmi pro on model selector (the top selection bar)the text there is untranslateable just choose the one that says pro
And then under it chose the one that translate to chinese
After That there's two tick box under it, choose the ROM you downloaded
After that chose the one that translate to install brush package, if it doesn't work choose the download brush package next to it
Thus method worked for me when my phone bricked hope it helps you
Revive Dead/Hard Bricked/Dead after Flash/LED doesn't light up the phone - K8 Note (XT1902-3)
If you tried to downgrade from Oreo to Nougat and your device is hard-bricked. Don't worry, follow the procedure below...
1. If your device is fully hard bricked and doesn't boot up by pressing the power button, and also the white LED light doesn't light up while u connect the charger/power on the USB to the PC. Try pressing all the 3 buttons, Volume Up+Volume Down+Power Button for about 25-30 seconds and connect your phone through USB to SP Flash Tool (install all drivers before as said in step 3) and see whether it detects your phone (If it detects, go to step 3). If this also didn't work, don't get panic - follow step 2 (Dismantling your device - the only way to recover. But be cautious while doing it, use proper tools).
2. Remove your phone back cover carefully and disconnect the battery connector as shown in the video
. Use proper tools and a screwdriver. Connect the charger and see now, the LED light will blink surely (If it doesn't blink now also, then it's a hardware problem, you should go to the service centre only).
3. If the LED light blinks properly, then go to SP Flash Tool (download the latest version here - https://androidmtk.com/smart-phone-flash-tool), and in Options->Option go to Download and check USB Checksum and Storage Checksum. Then choose the option Download Only in the drop-down list. (Dont Forget to install all Drivers before - MTK Drivers and Lenovo USB Driver, links below)
MTK (USB DA COM,Preloader USB VCOM,USB Port,USB VCOM) Drivers : https://spflashtool.com/download/Driver_Auto_Installer_v1.1236.00.zip
Lenovo USB Driver : https://lenovousbdriver.com/download/lenovo-driver-v1-1-33
(CAUTION : Don't select Format all+Download because if you mistakenly chose Format All+Download option it will delete all your IMEI no, Device Serial no, WIFI MAC address, and Bluetooth Address. But don't worry you can retrieve it through this method : https://forum.hovatek.com/thread-12328.html or
. Make sure you know all your IMEI no, and device serial no {You can get that from your device box, there will be a label in it}.
4. In the Scatter-Loading file click Choose and load MT6797_Android_scatter.txt under the extracted Oreo Rom (whichever version you prefer)
COUNTRY: GLOBAL
Oreo Stock Rom OMB 27.43-20 -> https://drive.google.com/file/d/18iZb3sumLUEBNNAYDfRVa3t8fJZVCXgg/view (MANNING OMB 27.43-20.7z ~ 1.40 GB)
Oreo Updated Rom OMB 27.43-45 -> https://drive.google.com/file/d/10QRAgh9Nap30zFSKVkANNkQkifWYrkwC/view (MANNING OMB-27-43-45.7z ~ 1.50 GB)
COUNTRY: USA
Oreo Updated Rom OMB 27.43-67 -> https://mirrors.lolinet.com/firmwar..._OMB27.43-67_subsidy-UNLOCKED_CFC_SVC.xml.zip (MANNING_RETAIL_OMB27.43-67_subsidy-UNLOCKED_CFC_SVC.xml.zip ~ 1.79 GB)
Oreo Updated Rom OMB 27.43-70 -> https://mirrors.lolinet.com/firmwar..._OMB27.43-70_subsidy-UNLOCKED_CFC_SVC.xml.zip (MANNING_RETAIL_OMB27.43-70_subsidy-UNLOCKED_CFC_SVC.xml.zip ~ 1.79 GB)
Wait for some time until it loads........
5. Now click on Download Button. Then switch off your phone and keep pressing the Volume UP button while connecting your phone to the PC through USB.
6. Now your phone will be flashed successfully and you will get a message Download OK. Close that and remove your USB and Power On your phone. Your phone will boot in Oreo, and you have unbricked your phone!!! Enjoy!!!
Downgrade to Nougat from Oreo - K8 Note
1. First Unlock your bootloader through the following steps:
(Before this take a backup of all your files, apps, and data because it will factory reset your mobile)
{Unroot your phone if you're rooted, also Uninstall any modules or Xposed or rooted apps if installed}
i) Go to Settings->About Phone and Tap on Build number for about 7 times, this will enable the Developer Options. Now go to Settings->Developer Options, switch ON it, and enable OEM unlocking & USB debugging.
ii) Next, Go to Fastboot mode manually. Switch off your phone. Press Volume UP+Power Button at the same time. While the phone vibrates release the power key and hold the Volume up button. You will see three options. Select fastboot option using the Volume UP key (for scrolling) and select it using Volume Down Key (for selecting).
iii) Extract minimal_adb_fastboot zip file on your PC -> https://androidfilehost.com/?fid=457095661767103465, and press Shift+Right Click inside the extracted folder and give open the command window here. Then Connect the mobile to your PC using a USB.
iv) Then type : fastboot oem unlock {Note: This will wipe all your phone data & make it as new, so take a backup of all before doing it} (Then press the Volume Up key in your mobile after it prompts)
vi) Type : fastboot reboot (It will boot up your phone normally)
vii) That's it now you have unlocked your bootloader successfully
2. Download Nougat Rom : (whichever version you prefer)
Updated Final Version Nougat ROM NMB26.54-94 ->
https://mega.nz/#!lIYSAaSb!q1S24g11wHxH3j0Zjl9FD8jO7s4jPFwInseORqYg9Xs (MANNING-54_94 .7z ~ 1.61 GB) COUNTRY : GLOBAL
https://mirrors.lolinet.com/firmwar...MB26.54-94_105_release-keys_retail_US_SVC.zip (manning_retail_user_7.1.1_NMB26.54-94_105_release-keys_retail_US_SVC.zip ~ 1.69 GB) COUNTRY : USA
Updated Nougat ROM NMB26.54-74 ->
https://androidfilehost.com/?fid=962021903579496260 (Lenovo_K8_Note_XT1902-3_(NMB26.54-74_75)_by_(FirmwareOS.com).zip ~ 2.09 GB) COUNTRY: GLOBAL
Nougat Stock Rom NMB26.54-35 -> (whichever link you prefer)
http://www.mediafire.com/file/7l8n312jhec1hmy/Lenovo_K8_Note_XT1902-3_MT6797_26092017_7.1.1.zip (Lenovo_K8_Note_XT1902-3_MT6797_26092017_7.1.1.zip ~ 2.10 GB) COUNTRY: GLOBAL
https://mega.nz/#F!EXphwJLb!Us6WQxEOAonVCrmLomxjHw (fastboot_manning_retail_user_7.1.1_NMB26.54-35-2_2_release-keys_retail_US.zip ~ 2.06 GB) COUNTRY: USA
https://mirrors.lolinet.com/firmwar...NMB26.54-35_35_release-keys_retail_US_SVC.zip (manning_retail_user_7.1.1_NMB26.54-35_35_release-keys_retail_US_SVC.zip ~ 2.01 GB) COUNTRY : USA
3. Extract the downloaded zip file and Go to Fastboot mode manually as mentioned before. (Switch off, Press Volume UP+Power button at same time. Release Power button while phone vibrates. Then Choose Fastboot option using Volume Up Key and select it using Volume Down Key)
4. Connect the USB Cable from phone to PC and Double click the flashall.bat file inside the downloaded zip. {Rename flashall.txt in the attachment to flashall.bat, if you didn't find it from the downloaded zip}. This will flash the Nougat Rom fully on your device. Sit Back for some time, and relax.
5. It will boot automatically and go to Nougat Rom. If you got some error on it or force stop apps or bootloop don't worry.
Switch off your phone by long pressing power key
6. Go to Recovery Mode manually (Switch off, Press Volume UP+Power button at same time. Release Power button while phone vibrates. Then Choose Recovery option using Volume Up Key and select it using Volume Down Key. Now you will get a Android dead kinda symbol. Press Volume UP + Volume Down +Power button, you will see Recovery Mode). Choose Wipe Data/Factory Reset and Yes--delete all user data. See this video if you have doubts how to factory reset using recovery mode :
7. Then select Restart System now in Recovery Mode (Volume Up and Volume Down to Select between options and Power Button to OK). Viola...!!! Your system will reboot and your'e on Nougat Rom...!!!
{Note : After downgraded to Nougat, you won't get OTA update to Oreo. But you can get all the OTA updates of Nougat. Main thing: Don't use "fastboot oem lock" in downgraded Nougat Rom it may brick your device. Because while you lock the oem in downgraded version, the system updates will look for Oreo Rom so it wont boot as you already downgraded. If it's bricked try flashing Oreo Stock Rom using spflash tool. So try keep the "device unlocked. Orange Status......" text that comes while you boot up, always in downgraded Nougat Rom}
Follow the procedure correctly so you can retrieve your K8 Note, don't blame me if you totally damaged/bricked your device.
Hit Like and Press Thanks...!!!!
If you have any doubts you can mail me at [email protected]
Bro... thanks a lot. I was able to downgrade my lenovo k8 note to Nougat from Oreo. Oreo update sucked lot of battery, had heating issues and sometimes hung during power off/restart. I decided to downgrade and this post was very helpful.
Flashing succeeded but still phone dead after several failed attempts, flashed nougat back, still no use... again flashed oreo and boom....... phone booted into oreo. thanks for the great help.
ROM links are not working
Stock Nougat Rom links are not working.. can you please check
Feel Awesome that you Downgraded K8 Note from Oreo to Nougat
sudhans said:
Bro... thanks a lot. I was able to downgrade my lenovo k8 note to Nougat from Oreo. Oreo update sucked lot of battery, had heating issues and sometimes hung during power off/restart. I decided to downgrade and this post was very helpful.
Click to expand...
Click to collapse
I am glad that my blog helped u in downgrading...
Felt Awesome that you Downgraded K8 Note from Oreo to Nougat
sudhans said:
Bro... thanks a lot. I was able to downgrade my lenovo k8 note to Nougat from Oreo. Oreo update sucked lot of battery, had heating issues and sometimes hung during power off/restart. I decided to downgrade and this post was very helpful.
Click to expand...
Click to collapse
I am glad that my blog helped u in downgrading...
Updated, check it.... Try Mediafire Link
bhellsun said:
Stock Nougat Rom links are not working.. can you please check
Click to expand...
Click to collapse
Nougat Stock Rom (NMB26.54-35) -> http://www.mediafire.com/file/7l8n312jhec1hmy/Lenovo_K8_Note_XT1902-3_MT6797_26092017_7.1.1.zip
Oreo Stock Rom (OMB 27.43-20) -> https://drive.google.com/file/d/18iZb3sumLUEBNNAYDfRVa3t8fJZVCXgg/view
Try the procedure properly so that you can downgrade...
Manivel2007 said:
Flashing succeeded but still phone dead after several failed attempts, flashed nougat back, still no use... again flashed oreo and boom....... phone booted into oreo. thanks for the great help.
Click to expand...
Click to collapse
If u have installed twrp in oreo get rid of that and go for stock oreo recovery, if u have rooted already on oreo means unroot your mob, uninstall xposed/magisk manager if it's there. Then start the process with unlocked bootloader, go to fastboot mode and run flashall.bat inside the Stock Nougat Rom zip. After the process finished successfully the device will boot automatically. You may get some errors or not, no probs about it, go to recovery mode manually and factory reset your mobile. Restart the mob. This will surely work. Go for it...
Anyways, I feel good that you retrieved your phone back through Oreo Rom. :good:
Thanks, man Much appreciate. I have followed your instruction and I succeeded. XDA always rocks.
100 percent working
working to kmay k8 note thank you so much for helpng each other
After flashing, Have tried to install the Nougat ROM, But getting below error
Flashing Options:
- flash userdata: 0
- erase userdata: 0
- erase cache: 0
Waiting for fastboot enumeration...
Not found any devices connected. Please check and try again.
i need 8.0 43-45 any upload in eat
please gavi a ink on lenovo k8 note latest update
appreciated your work
hey, I recently read your thread on the same topic of lenovo k8 note.
I downgraded my phone from oreo update to naugat directly through flash tool.
it got dead and after multiple flashings it didn't work.
finally your thread help me out to revive my phone, but it is just showing me the logo.
it has stucked on boot loop.
what to do?
help me out.
I feel good that you flashed your K8 Note successfully
Dj ps said:
Thanks, man Much appreciate. I have followed your instruction and I succeeded. XDA always rocks.
Click to expand...
Click to collapse
I Feel Good that you Succeeded following my steps
Don't downgrade from Oreo to Nougat of K8 Note through spflash tool
akki8800 said:
hey, I recently read your thread on the same topic of lenovo k8 note.
I downgraded my phone from oreo update to naugat directly through flash tool.
it got dead and after multiple flashings it didn't work.
finally your thread help me out to revive my phone, but it is just showing me the logo.
it has stucked on boot loop.
what to do?
help me out.
Click to expand...
Click to collapse
Try factory resetting using Recovery mode, if u can go through it. Else flash Oreo Rom through latest version of spflash tool. Only Downgrade using fastboot mode....
Given Oreo Updated ROM for K8 Note links, check it...
kulerman123 said:
please gavi a ink on lenovo k8 note latest update
Click to expand...
Click to collapse
OMB 27.43-45 links updated, check it...
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
See whether your phone is properly connected to PC and the device is showing or not
mymilu2018 said:
After flashing, Have tried to install the Nougat ROM, But getting below error
Flashing Options:
- flash userdata: 0
- erase userdata: 0
- erase cache: 0
Waiting for fastboot enumeration...
Not found any devices connected. Please check and try again.
Click to expand...
Click to collapse
Check up your drivers and the ROM file whether its corrupted....
Thanks for your positive review....
kulerman123 said:
working to kmay k8 note thank you so much for helpng each other
Click to expand...
Click to collapse
Thanks and I am always glad to help peoples.... :highfive:
I tried many things... i tried to use recovery but after showing lenovo logo for about a minute... it either gets off or restart. I m using latest sp flash tool.
Drivers are updated and.
What should i do....
I have given it to service center as well even they cant help it out..
Saying motherboard has issues...
:crying::crying:
Can Lenovo k8 note Android p unofficial ROM.
Hi, xda developers is there any way that Lenovo k8 note can get Android p ROM. If yes please reply?
Hello guys,
I have a Mi 9T Pro Global Version and today I received the MIUI 12 update. I didnt really like the update so I decided to go back on MIUI 11. I downloaded the Mi PC Suite (c.mi.com/thread-2224746-1-0.html) and did a backup. I downloaded the MIUI 11 Global Rom ( c.mi.com/de/miuidownload/detail?device=1700361) and updated it throught the PC Suite (selected the MIUI 11 ROM). Now my phone doesnt turn on and there is the message "The system has been destroyed". And I can access the fastboot but I dont know what it is.
I'm really desperate and dont know what to do..
Please can someone help me!
did you choose 9T pro ROM?
Download mi flash, turn phone in fastboot vol - and power pressed for a few seconds). Connect phone to PC, get ROM for fastboot and your model, flash
You can tey xiaomiMiTool v2 to do it with just a couple clicks
yaro666 said:
did you choose 9T pro ROM?
Download mi flash, turn phone in fastboot vol - and power pressed for a few seconds). Connect phone to PC, get ROM for fastboot and your model, flash
You can tey xiaomiMiTool v2 to do it with just a couple clicks
Click to expand...
Click to collapse
yeah I did! I read in some threads that it wont work because the bootloader isnt unlocked. Im sooooo frustrated... I just wanted the old MIUI back again
yaro666 said:
did you choose 9T pro ROM?
Download mi flash, turn phone in fastboot vol - and power pressed for a few seconds). Connect phone to PC, get ROM for fastboot and your model, flash
You can tey xiaomiMiTool v2 to do it with just a couple clicks
Click to expand...
Click to collapse
yeah got the error "erase boot error"
Can you go to system recovery mode?
If so try wiping data there and restart
Ajayprince said:
Can you go to system recovery mode?
If so try wiping data there and restart
Click to expand...
Click to collapse
no I cant
so you need edl flash - search for someone with edl account, you csn get it for around 35$ remotely
tkv29 said:
Hello guys,
I have a Mi 9T Pro Global Version and today I received the MIUI 12 update. I didnt really like the update so I decided to go back on MIUI 11. I downloaded the Mi PC Suite (c.mi.com/thread-2224746-1-0.html) and did a backup. I downloaded the MIUI 11 Global Rom ( c.mi.com/de/miuidownload/detail?device=1700361) and updated it throught the PC Suite (selected the MIUI 11 ROM). Now my phone doesnt turn on and there is the message "The system has been destroyed". And I can access the fastboot but I dont know what it is.
I'm really desperate and dont know what to do..
Please can someone help me!
Click to expand...
Click to collapse
You make a big mistake
U cant downgrade if youre phone was locked bootloader
Try this one
https://forum.xda-developers.com/k20-pro/how-to/edl-flash-how-to-fix-hard-brick-t3968400/amp/
Or go to service centre if your phone still have warranty
tkv29 said:
Hello guys,
I have a Mi 9T Pro Global Version and today I received the MIUI 12 update. I didnt really like the update so I decided to go back on MIUI 11. I downloaded the Mi PC Suite (c.mi.com/thread-2224746-1-0.html) and did a backup. I downloaded the MIUI 11 Global Rom ( c.mi.com/de/miuidownload/detail?device=1700361) and updated it throught the PC Suite (selected the MIUI 11 ROM). Now my phone doesnt turn on and there is the message "The system has been destroyed". And I can access the fastboot but I dont know what it is.
I'm really desperate and dont know what to do..
Please can someone help me!
Click to expand...
Click to collapse
I did the same thing today. Easiest solution (which worked for me)
Mi unlock - login on same account as on phone, and unlock device (might take few attempts - for me successfull was 3rd, before that I had weird errors in Chinese)
When unlocked, then use mi flash to flash v11 and check last option on right bottom (full and lock?)
After that my phone came to life again