Database Users

[How To] Install TWRP on OS 4.5.3 and Boot Recovery (newbie friendly)

TWRP (Team Win Recovery Project) replaces a device's stock recovery and provides, among other options, the ability to install img (image) and zip files. TWRP for the Fire HDs was developed by JMZ and is described here.
How to install TWRP
These steps are for a first-time install on a rooted Fire HD running OS 4.5.3 with stock bootloader and recovery.
At this time, 4.5.3 bootloader is required. You're welcome to try to get it onto a different OS, but you need the 4.5.3 bootloaders and I'm not getting into that. So, if you're running a different OS, have messed with partitions or done something that requires a TWRP reinstall (other than reinstalling 4.5.3 and rerooting), you risk being unable to boot recovery or bootloop/brick.
OK, that doesn't sound so "newbie-friendly" but this really is a simple process that should always go smoothly on a "clean" OS 4.5.3.​
You can easily install TWRP with either TWRP Manager (also by JMZ) or Flashify from the Play Store.
If you don't have Play Store access:
- Flashify - v 1.9.1 from APKMirror
- TWRP Manager - Download from JMZSoftware​For installing TWRP, the only difference between the two is that TWRP Manager auto-downloads the correct TWRP version while Flashify requires you download it yourself.
[EDIT 8/16/2015] At this time, TWRP Manager doesn't seem to be working. Use Flashify, instructions below. Steps for TWRP Manager are at bottom of post.
Install TWRP with Flashify
Download JMZ's ariel TWRP image (https://www.androidfilehost.com/?fid=24052804347756852) to the Fire's download folder.
Install and run Flashify (download link above) and give it superuser access when prompted. It probably will also prompt to apply loki patch for Kitkat. Say yes.
Tap Recovery Image and then Choose a File.
Navigate to download folder, tap the TWRP file, and when Flashify asks if you are sure, tap Yup!
If install succeeds ("Flash Complete"): (a) Tap Reboot now. (b) When back in Fire OS, boot to recovery (below) and confirm you're in TWRP. Note: If tablet bootloops, post the problem in one of the bootloop threads.
If install fails (error messages displayed), first take a screenshot. If you can determine the problem, fix it and try again or try TWRP Manager. If you don't understand the error or can't resolve it, post in a "TWRP install failure" thread.
How to Boot to Recovery
Manual: (a) Power off tablet. (b) Hold down power and volume-up buttons at same time until you see "Amazon," then release. (If you just boot back into Fire, you didn't power off first or didn't hold buttons long enough.)
adb command from computer: adb reboot recovery
- If you see TWRP, great! Check it out and then press Reboot and System to go back to OS.
- If you get stock recovery screen ("reboot" and "factory reset"), TWRP didn't install. Reboot should be highlighted. (If it's not, use volume-up or -down to select it.) Press the power button to click reboot and when back in Fire OS, try the other app.
[EDIT 1] For simplicity, install TWRP Manager on the Fire and follow these steps.
Install TWRP with TWRP Manager
Install and run TWRP Manager and give it superuser access when prompted. It will also prompt to apply patch for Kitkat. Say yes.
Tap top-left of screen for slide-out menu and select Install TWRP.
Confirm Device Name shows "ariel" and then tap Install Recovery. [download begins]
At warning screen, tap yes.
If install succeeds ("Flash Successful"): (a) Go to slide-out menu and choose Reboot Options and then Reboot Device. (b) When back in Fire OS, boot to recovery (above) and confirm you're in TWRP.
Note: If tablet bootloops, post the problem in one of the bootloop threads.
If install fails (error messages displayed), take a screenshot in case you need to post the problem and then look at comments here for a solution. If you can determine the problem, fix it and try again or try Flashify. If you don't understand the error or can't resolve it, post in a "TWRP install failure" thread.

After step 5 a) only puts on the screen "Kindle Fire" and I can not make the "Power and Volume up buttons reboot".
Could you help me please?

Po069 said:
After step 5 a) only puts on the screen "Kindle Fire" and I can not make the "Power and Volume up buttons reboot".
Could you help me please?
Click to expand...
Click to collapse
I'm sorry I can't help you. This guide is for the 2014 Fire HD tablets. The Kindle Fires are ealier models. Look here to figure out which tablet you have and then post the problem in the forum for your tablet:http://forum.xda-developers.com/kindle-fire/help/index-amazon-kindle-fire-t3205350

DoLooper said:
I'm sorry I can't help you. This guide is for the 2014 Fire HD tablets. The Kindle Fires are ealier models. Look here to figure out which tablet you have and then post the problem in the forum for your tablet:http://forum.xda-developers.com/kindle-fire/help/index-amazon-kindle-fire-t3205350
Click to expand...
Click to collapse
Thank you very much for your answer.
Kind regards.

Sorry if this is a stupid question, but if I update the Fire OS after successfully rooting/installing TWRP will I mess up anything?
I rooted everything and installed TWRP succesfully on my Fire HD 6 running 4.5.3 (it was fresh out of the box and I didn't allow any OTA updates). If I update the OS now will it brick it or mess up TWRP in any way?
Also, ultimately I'm just trying to get Google Apps on my HD 6 (it'd be nice if I could get lollipop on it but I bricked the last HD 6 I had so I'm starting with the low-hanging fruit haha). However, I can't really find a guide to do this starting from 4.5.3 Fire OS... Could you point a noob anywhere to either a) install GApps or b) get lollipop installed?
I was trying to follow this tutorial but it's not really noobie-friendly and I think it's meant to start from 5.0.n which is why I'm asking if I can update without screwing anything up.
Thanks for your help!

SpaceBananas said:
Sorry if this is a stupid question, but if I update the Fire OS after successfully rooting/installing TWRP will I mess up anything?
I rooted everything and installed TWRP succesfully on my Fire HD 6 running 4.5.3 (it was fresh out of the box and I didn't allow any OTA updates). If I update the OS now will it brick it or mess up TWRP in any way?
Also, ultimately I'm just trying to get Google Apps on my HD 6 (it'd be nice if I could get lollipop on it but I bricked the last HD 6 I had so I'm starting with the low-hanging fruit haha). However, I can't really find a guide to do this starting from 4.5.3 Fire OS... Could you point a noob anywhere to either a) install GApps or b) get lollipop installed?
I was trying to follow this tutorial but it's not really noobie-friendly and I think it's meant to start from 5.0.n which is why I'm asking if I can update without screwing anything up.
Click to expand...
Click to collapse
If you update now without following that guide you will lose root and TWRP. You may not be able to root with Kingroot and you won't have the "friendly" bootloaders that can boot TWRP. Don't do it.
I'll have to get back to you about updating. Maybe bibikalka will jump in. Look around for a KitKat version of pico-uni Gapps, which you could install in TWRP now. There will be link in an old guide for OS 4.

SpaceBananas said:
I rooted everything and installed TWRP succesfully on my Fire HD 6 running 4.5.3 (it was fresh out of the box and I didn't allow any OTA updates).
. . .
Also, ultimately I'm just trying to get Google Apps on my HD 6 (it'd be nice if I could get lollipop on it but I bricked the last HD 6 I had so I'm starting with the low-hanging fruit haha). However, I can't really find a guide to do this starting from 4.5.3 Fire OS... Could you point a noob anywhere to either a) install GApps or b) get lollipop installed?
I was trying to follow this tutorial but it's not really noobie-friendly and I think it's meant to start from 5.0.n which is why I'm asking if I can update without screwing anything up.
Click to expand...
Click to collapse
OK, I looked at the guide again. @bibikalka may have a preferred route, but here's what I suggest: Pretend nothing else is there except steps 1) through 3) and just carefully follow those steps.
Download all the files to the pc first. Get the 5.1.1 update (only because we know it's rootable with Kingroot) and rename the extension from bin to zip. Skip Xposed (step 1-7). Do get 5.2.0_stock_recovery_uboot.zip (step 1-10). Copy or move all the files to the downloads folder on device. (This is the long way and you can download directly to device if you prefer. I just find it easier to download and double check that you have all the right files from the pc.)
Hold Power and volume+ to get into TWRP, then carefully do all the sub-steps under 1) except for step 7. (From what you say, I just don't think you need Xposed.) Just be sure you have the correct file at each step and you'll be fine.

DoLooper said:
OK, I looked at the guide again. @bibikalka may have a preferred route, but here's what I suggest: Pretend nothing else is there except steps 1) through 3) and just carefully follow those steps.
Download all the files to the pc first. Get the 5.1.1 update (only because we know it's rootable with Kingroot) and rename the extension from bin to zip. Skip Xposed (step 1-7). Do get 5.2.0_stock_recovery_uboot.zip (step 1-10). Copy or move all the files to the downloads folder on device. (This is the long way and you can download directly to device if you prefer. I just find it easier to download and double check that you have all the right files from the pc.)
Hold Power and volume+ to get into TWRP, then carefully do all the sub-steps under 1) except for step 7. (From what you say, I just don't think you need Xposed.) Just be sure you have the correct file at each step and you'll be fine.
Click to expand...
Click to collapse
Any point in using 5.1.1 ? Since SuperSu gets flashed during the update, it does not care which FireOS version it is. Nobody will be running Kingroot since SuperSu is already there

bibikalka said:
Any point in using 5.1.1 ? Since SuperSu gets flashed during the update, it does not care which FireOS version it is. Nobody will be running Kingroot since SuperSu is already there
Click to expand...
Click to collapse
No, 5.1.2 is fine. It was just a cya suggestion in case user missed a step and somehow lost root--but OF COURSE no steps will be missed.

TWRP failed to install, now have no recovery
So I'll start by saying I'm an idiot. I wasn't paying attention to which version OS is required and tried to install TWRP using Flashify. It went through the motions and did its reboot, and now I'm stuck with absolutely no recovery at all. I've tried searching these forums for a "TWRP installation failed" thread and have had no luck, at least not for the Fire HD 6 device. Really need help here, I have absolutely no way to get into recovery to flash anything back at all.

[TUT] Install [FireOS 5.4.0.1], ROOT & GAPPS

Update13, Oct 23, 2017: Everything still works with the latest 5.4.0.1, just grab the correct ROM file
Update12, Jul 23, 2016: Upgraded to FireOS 5.3.1, everything went smooth. It's not clear yet if 5.3.1 can be safely downgraded to 5.1.2 in order to get root. Stay put until we get some confirmation! It has been reported that the downgrade from 5.3.1 to 5.1.2 bricks the Fire HD!!! So downgrade to FireOS 4.5.3 instead, root, quickly turn off the WiFi, and then use this guide to go back to 5.3.1 (and do use 5.3.1 bootloaders!):
http://forum.xda-developers.com/fire-hd/development/unbrick-fire-hd-6-7-flashing-lollipop-t3405797
Update11, Apr 29, 2016: I installed the new 5.1.2 build from Mar 30, 2016 via the instructions below (using TWRP), and everything worked fine. This version is not rootable by Kingroot (yet). One good option (if you have this version now) is to sideload via the stock recovery the rootable 5.1.2 from Feb 26 https://kindle-fire-updates.s3.amaz...HBV/update-kindle-20.5.4.2_user_542168620.bin , and then run Kingroot. See Update10 for other tips on what to do.
Update10, Apr 8, 2016: According to the reports, the stock 5.1.2 (Feb 26, 2016 build) is rootable via Kingroot (update to 5.1.2 via the standard Amazon procedures, try Kingroot several times). Block OTA updates (to prevent surprises): In Explorer go to /system/priv-app/DeviceSoftwareOTA and rename DeviceSoftwareOTA.apk to .apk_ . Then you can install GAPPS as per these instructions : http://forum.xda-developers.com/showpost.php?p=65405511&postcount=268 Note that you will still benefit if you follow this guide: install TWRP, and reinstall 5.1.2 via the steps below and get all the Android goodies loaded at once (including Xposed) on an entirely clean /system partition with no Kingroot files.
Update9, Mar 21, 2016: The instructions below are updated for 5.1.2 . Kingroot does not work under 5.1.2, use adb sideload to 4.5.3 to get root! It seems that 5.1.2 has a bug where /sdcard is not visible for root (the issue seems to be this newer SuperSu version, not FireOS 5.1.2 ... I went back to SuperSu 2.46, and now it works as before). To be on the safe side, I modified scripts in post #2 to work with the newer SuperSu as well (but I don't recommend this newer SuperSu version ...) . According to a report, 5.1.1 bootloaders can be run after 5.1.2 without bricking. Regardless, here, all the bootloaders will be kept as 5.1.1 just to be sure
Update7, Feb 13, 2016: Instructions for the latest 5.4.1 update file (FireOS 5.1.1 -Bellini - with "blue shade") - Note that the instructions can be confusing, don't rush if you are not sure what you are doing (and especially if your Amazon warranty already expired) !!!
Update6: Since early Oct, there is a new evil (!!!) update named here as 5.2.2u2 (which bricked a few Fires), but thankfully the update glitches has been worked out!!! Back to business !!! Observe that once you booted 5.2.2u2 bootloaders (either through the Amazon update or the procedure below), there is no going back !!! The only other bootloaders you can run at this point are 4.5.3 as per post #2
Update4: Please do not deviate from the instructions, and do flash GAPPS during Step 1), together with Xposed. JMZ tool for installing GAPPS is not recommended!
For lazy ones I recommend skipping factory reset in Step 1) below if you already have Lollipop.
Install instructions.
Unless you have 4.5.3 bootloaders and TWRP at the moment, your path into TWRP goes via post #2 (and you do need TWRP to proceed!!!). No need to fear, I have made a simple script to flash 4.5.3 bootloaders and TWRP in just one click, see section "101" in post #2 !!!
Before proceeding, please write down your current FireOS version, and its date. To install the latest Lollipop you can pretty much start anywhere, these are rough suggestions how to get TWRP running in the quickest way possible :
unrooted Lollipop, pre-5.1.2 or 5.1.2, root via KingRoot (try several times), use post #2 for TWRP, re-load 5.1.2 from TWRP by following this post
unrooted Lollipop, alternative option, (note the version you have!!!), downgrade to 4.5.3 via stock recovery ADB sideload option (block updates immediately!!!), root 4.5.3, use post #2 to install TWRP
already rooted Lollipop, use post #2 to boot into TWRP, the bat script in section "101" is recommended (and can do a clean re-install of your current Lollipop version with the same procedure if you care)
rooted FireOS 4.5.x (latest Kingroot is known to root either 4.5.3 or 4.5.5.1, perhaps 4.5.4 & 4.5.5 as well) -then post #2 (if the bootloaders are not 4.5.3)
unrooted 4.5.x (>4.5.3 such as 4.5.4 or 4.5.5 but pre-4.5.5.1): disable OTA, run latest Kingroot, report back if failure, use post #2 for TWRP
unrooted whatever - write directly into memory 4.5.3 bootloaders & TWRP (somewhat slow, but can be an attractive option if you cannot root your version of Lollipop directly, and don't want to factory reset the device memore during the downgrade to 4.5.3 in order to root) :
http://forum.xda-developers.com/fire-hd/development/unbrick-fire-hd-6-7-flashing-lollipop-t3405797
0) Before proceeding, ensure that you have a functional non-system launcher (install any as user app), or enable the stock Amazon launcher via adb if it's blocked (pm enable com.amazon.firelauncher) !!! Make sure it works. This will ensure that you can avoid problems later on when the /system partition is overwritten, and your non-Amazon launcher that was installed as a system app is gone. I had Nova as the system app (overwritten by the upgrade!), and Amazon launcher blocked, so after the upgrade to 5.1.2 there was no working launcher. Not good ... Had to do a couple of system resets and TWRP restores until I figured out what was happening ...
1) boot into TWRP, and, in a single session (!!!!!)
(Optional) clear cache/dalvik (to shrink the backup size), run TWRP backup to a USB drive via USBOTG cable for your /data partition
(Optional) do factory reset (can skip if you already have Lollipop),
flash the latest FireOS from this official Amazon link (rename *bin to *zip such that TWRP can recognize it):
https://www.amazon.com/gp/help/customer/display.html?nodeId=201596850
If for some reason you need a different FireOS version, grab the file you need from the links in this post.
flash 5.2.0_stock_recovery_only.zip below. If you kept track of your prior FireOS versions and know what you are doing, you can flash
5.4.1_1133_stock_recovery_uboot.zip from post #2 (this will flash 5.2.0 stock recovery & 5.4.1 bootloaders). Note that if you downgraded from FireOS 5.3.1 to 4.5.3 to root, you must flash 5.5.2_1534_stock_recovery_uboot.zip instead, this will put the required 5.3.1 bootloaders back.
flash the attached make_space_v02.zip (this will remove moffice and weather to make room in /system for GAPPS , can always install this stuff from Play Store)
flash Supersu.zip https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
flash Xposed for Lollipop 5.1 (if you want it for misc modules, highly recommended to do this just in case)
http://forum.xda-developers.com/showthread.php?t=3034811
(version xposed-vXX-sdk22-arm.zip )
flash Pico (Uni) GAPPS for 5.1 :
http://forum.xda-developers.com/android/software/tk-gapps-t3116347
clear cache/dalvik in TWRP
Another reminder: If you are absolutely sure that you have never run FireOS 4.5.5.1 bootloaders or Lollipop with anything but 5.2.0 bootloaders, you can flash 5.2.0_stock_recovery_uboot.zip from post #2 here, this way you preserve the well behaved 5.2.0 bootloaders. If you are not sure about any of this, don't do it !!!
2) reboot to recovery, you should see stock 5.2.0 recovery (this is just to see if it works, for troubleshooting, but otherwise a meaningless step from the update perspective ...). Notice that at this point you no longer have TWRP. Since it does not boot with the 5.x bootloaders anyway, TWRP was replaced with the stock recovery that has some useful features, such as adb sideload. Later on it's possible to get back into TWRP from within the rooted Lollipop by following post #2.
3) reboot to Lollipop (takes ~15 minutes), and hopefully, it works.
Bricking warning !!! If you flashed the wrong bootloaders, and you get a black screen upon reboot, there is good news - you can UNBRICK !!! The bad news is that the procedure is quite involved, and may take quite a bit of effort. So measure twice, cut once !!! If unsure about bootloaders, ask here first before flashing, instead of coming back to complain about the brick later.
4) if step 3) fails, you get into working 5.2.0 recovery by pressing "Pwr & Vol+". At this point you sideload 4.5.3 stock, and go back to step 0). Come back here and ask questions (and thank me again for being able to recover so easily !!! )
5) make_space_v02.zip already disabled OTA updates , but please verify that you now have DeviceSoftwareOTA.apk_ block OTA updates (to prevent surprises): In Explorer go to /system/priv-app/DeviceSoftwareOTA and rename DeviceSoftwareOTA.apk to .apk_
6) Consider adding an option to switch from pure Amazon interface to almost pure Android and back on the fly:
http://forum.xda-developers.com/fire-hd/general/fireos-4-5-x-root-quickly-switch-to-t3145613
Note: Using JMZ tool for installing GAPPS is not recommended, please flash GAPPS as per Step 1)
The next post discusses how to get into TWRP temporarily with Lollipop installed, and come back to Lollipop
Want to say thanks by clicking the "Thanks" button ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Higher skill level operation - proceed with care !!!
Update3.5 : Updates for 5.3.1 !!! Please use 5.5.2_1534_stock_recovery_uboot.zip if you downgraded from stock FireOS 5.3.1 to 4.5.3 for rooting, meaning that you now have 5.3.1 bootloaders
Update3.4 : Updates for 5.1.2 !!! Please use the new WindowsAutoTWRP_v03.zip with 5.1.2 (backward compatible to 5.1.1 and before). There are tons of verification messages in the new script, please read carefully !!! It appears that in 5.1.2 there is a bug such that root cannot see /sdcard/gscript properly (this was the issue caused by the latest SuperSu I tried). To handle this, I redirected the path to /data/media/0/gscript . If you are using Gscript, delete the flash_453(_stay) scripts in Gscript, and open them again after you run WindowsAutoTWRP_v03 once. This way Gscript will pick up the corrected scripts with the updated path. Pay attention to the checksums !!!
Update3.3 : And now "Newbie Friendly" !!! Just one simple *.bat script under Windows !!! See section "101"
Update3.2 : If you are unsure what bootloader file to use, go with 5.4.1_1133_stock_recovery_uboot.zip
Update2: If you ever booted the Sept 2015 Lollipop (FireOS 5.0.1, called here 5.2.2u2), DO NOT use 5.2.0_stock_recovery_uboot.zip , it will brick!!!
Update1: Instructions are clarified with more detail on how to use "dd" correctly.
Important : do not try to use Flashify!!! Flashify cannot access all partitions that you need to flash !!! Flashify will brick your Fire !!!
Here you get to run TWRP again, and then return to Lollipop.
The steps must be executed with precision (all 3 files must be dd'ed successfully). Keep the 5.4.1_1133_stock_recovery_uboot.zip file from below on the device, in its /images directory you have 3 images for 5.4.1 which you can flash back right away if you need to abort. If something is wrong, DO NOT reboot for as long as it takes. Keep the device without reboots, and come back here for guidance.
To understand a bit what we are doing in this post, read this :
A bit of background. Fire HD boots TEE1 -> UBOOT -> recovery. With 4.5.3, we lucked out that TEE1 & UBOOT accepted unsigned recovery (aka TWRP). No such luck with 5.2.x - TEE1 & UBOOT expect signed recovery (for example, stock one). That's why I had everybody overwrite TWRP with stock recovery in post #1 as the last step in the upgrade. Otherwise after the upgrade to 5.2.x, TWRP would still be sitting in recovery, and being unsigned, it cannot boot !!! A few bricks were created because of this last point. But with the stock 5.2.0 recovery (which it will boot), at least there is an option to sideload another update file.
So, the key to running TWRP while in 5.2.x is to overwrite the 3 key components together (TEE1, UBOOT, recovery), and then return things to 5.2.x once TWRP is no longer needed.
For convenience, before proceeding save all the attached files on your Fire in "/sdcard/gscript"
101 - Automatic installation under Windows !!!
I managed to debug it and not to brick !!! Tested personally (gotta eat your dog food !!!) Heavily inspired by glitch3yf0x in http://forum.xda-developers.com/amazon-fire/general/root-playstore-busybox-optimize-flash-t3281804
Save the necessary Lollipop bootloaders zip into /sdcard/gscript on Fire HD, this will get you back into Lollipop
Download WindowsAutoTWRP_v03.zip to your PC with some Windows on it, unpack anywhere
Run the commands below, and make sure you authorize root access for adb when the question pops up on your Fire:
Code:
adb shell
su
exit
exit
Enable apps from unknown sources
Run 1_FIRE_HD_4TH_GEN_TWRP.bat
At the bottom you should see these checksums :
Code:
3a1f3cd1ef405eaeec719eaeb41ab791 /dev/block/mmcblk0p3
d605e31a180652c65d6957b58d2d8501 /dev/block/mmcblk0p5
305a5546ff8960b51cd573b59a05cde6 /dev/block/mmcblk0p7
Make sure the checksums are correct before rebooting !!! Do not reboot if checksums are wrong, keep the Fire running, and come back here to ask questions !!! I almost bricked under 5.1.2 due to the newer SuperSu version, but managed to catch the wrong checksums, and updated the scripts to have additional verifications.
A possible issue here is that you did not have root access, so the "dd" commands could not succeed. At this point you can go to method A since the script left all the necessary ingredients on the device, so all you need to do is to run the script from Gscript (installed for you!), make sure you click "needs SU". Delete the old flash_453 and flash_453_stay scripts from Gscript, and re-open them again after you run WindowsAutoTWRP_v03 at least once.
Verify again that you have 5.x.x bootloaders zip file on Fire HD which you will access from TWRP (it can also be on a USB drive if you got USB OTG cable) - Out of kindness I've provided the most popular bootloaders zip at the moment - 5.4.1 version, you can find it in /sdcard/gscript, it's TWRP ready, just flash it if 5.4.1 is OK for you (5.4.1 bootloaders will also work with FireOS 5.1.2 )
Type "adb reboot recovery"
In TWRP, after you are done with everything, don't forget to flash the 5.x.x bootloaders zip file in order to boot back into Lollipop!
After the batch file runs, you will have Gscript installed, together with the required script & image files in /sdcard/gscript, so you can head over to the next section (section A), and set up TWRP access without using a PC! You will also have scripts in there to enable/disable Amazon's stuff on the fly, as described in here :
http://forum.xda-developers.com/fire-hd/general/fireos-4-5-x-root-quickly-switch-to-t3145613
A - Instructions with Gscript.
Due to popular demand (looking at DoLooper here ), the approach is simplified and all the bootloaders are flashed via a script, and this assumes that you have Gscript installed (here : https://bitbucket.org/Equidamoid/gscript/downloads )
Download the attached "453_key_images.zip" to your Fire, create a folder (if does not exist) "/sdcard/gscript", and unpack this zip file in "/sdcard/gscript" (so all *bins sit in this directory)
[*]Download the attached "flash453.zip", copy to "/sdcard/gscript", unpack
Run the bat from WindowsAutoTWRP_v03 in section "101" at least once
Go to Gscript/Add script/Need Su (yes, check)/Load file "flash_453_stay.sh"
From Gscript run this "flash_453_stay.sh", and verify the checksums
If you are using versions prior to FireOS 5.1.2, you can use "flash_453.sh" and you should end up in TWRP (it will reboot automatically)
If unhappy about auto-reboot, use "flash_453_stay.sh" script, it will only do "dd" and exit back to the current OS (no auto-reboot to recovery)
B - Alternative (old) instructions via ADB
Download the attached "453_key_images.zip" to your Fire, create a folder "/sdcard/gscript", and unpack this zip file in "/sdcard/gscript". From the PC side, open ADB and start typing :
adb shell
su
cd /sdcard/gscript
ls
dd if=453_tee1.img of=/dev/block/mmcblk0p3
dd if=453_uboot.img of=/dev/block/mmcblk0p5
dd if=453_twrp.img of=/dev/block/mmcblk0p7
exit
exit
adb reboot recovery
These are 4.5.3 bootloaders, and TWRP. Just like in the good old days under FireOS 4.5.x
This is a sample log, your output should look similar (typed commands are colored in red) :
C:\Program Files\Minimal ADB and Fastboot>adb devices
List of devices attached
0000000000000XXX device
C:\Program Files\Minimal ADB and Fastboot>adb shell
[email protected]:/ $ su
su
[email protected]:/ # cd /sdcard/gscript
cd /sdcard/gscript
[email protected]:/sdcard/gscript # ls
ls
453_key_images.zip
453_tee1.img
453_twrp.img
453_uboot.img
[email protected]:/sdcard/gscript # dd if=453_tee1.img of=/dev/block/mmcblk0p3
dd if=453_tee1.img of=/dev/block/mmcblk0p3
6364+1 records in
6364+1 records out
3258876 bytes transferred in 0.543 secs (6001613 bytes/sec)
[email protected]:/sdcard/gscript # dd if=453_uboot.img of=/dev/block/mmcblk0p5
dd if=453_uboot.img of=/dev/block/mmcblk0p5
414+1 records in
414+1 records out
212116 bytes transferred in 0.041 secs (5173560 bytes/sec)
[email protected]:/sdcard/gscript # dd if=453_twrp.img of=/dev/block/mmcblk0p7
dd if=453_twrp.img of=/dev/block/mmcblk0p7
14004+0 records in
14004+0 records out
7170048 bytes transferred in 1.103 secs (6500496 bytes/sec)
[email protected]:/sdcard/gscript # exit
exit
[email protected]:/ $ exit
exit
C:\Program Files\Minimal ADB and Fastboot>adb reboot recovery
Click to expand...
Click to collapse
Reboot into recovery, and you should be in TWRP.
C - What am I doing in TWRP ???
-- Well, you tell me
Generally, you want to flash something (Xposed, GAPPS?). Keep flashing whatever else you need! Note that at this point you won't be able to boot into 5.2.x, siegesoldier has established this fact with his early upgrade attempts. 4.5.3 bootloaders will not boot 5.2.x kernel due to some missing parameters !
When you want to go back to Lollipop, in TWRP flash the attached 5.4.1_1133_stock_recovery_uboot.zip (or 5.5.2_1534_stock_recovery_uboot.zip). This will put 5.4.1 (or 5.5.2) bootloaders back, as well as 5.2.0 stock recovery. Note if you are sure that you never had 5.4.1, 5.2.2u3 or 5.2.2u2 bootloaders running (or stock FireOS 4.5.5.1), use 5.2.0_stock_recovery_uboot.zip (this is rare now, be very sure !!!) If you forget to flash the 5.x.x bootloaders, the device will cycle upon reboot with the Amazon logo continuously. This is not a big issue ! Just hold the power button until the Fire shuts off. Then from the turned off state turn it on by pressing power and Vol+ buttons together, and this will get you back into TWRP where you can flash the 5.x.x bootloaders and reboot to Lollipop.
Now reboot to system, and you should have your Lollipop
Want to say thanks by clicking the "Thanks" button ?

bibikalka said:
. . . and finally, when TWRP asks you to install root, say "yes" . . .
2) reboot to recovery, you should see stock 5.2.0 recovery.
Click to expand...
Click to collapse
Yahoo! I'm either almost there or am no longer rooted. adb shell, su doesn't return #-sign, but I can "cd" and "ls" all around /system. SuperSU installer says I'm "not fully rooted," but if you press Play (store) Amazon wants to open appstore of course, and no TWRP. Tried adb install, which failed:
Desktop>adb install eu.chainfire.supersu.apk
3017 KB/s (5904943 bytes in 1.911s)
pkg: /data/local/tmp/eu.chainfire.supersu.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]​Guess I'm partially rooted? Need some reassurance because had a little trouble flashing (which I won't explain unless I must) . Anyway, I have 5.2.0 recovery and if superuser is as expected, I'll go for post 2 (i think)! Thanks!

Managed to get the upgrade from reading the last thread, but no TWRP. Thanks!!
DoLooper said:
Yahoo! I'm either almost there or am no longer rooted. adb shell, su doesn't return #-sign, but I can "cd" and "ls" all around /system. SuperSU installer says I'm "not fully rooted," but if you press Play (store) Amazon wants to open appstore of course, and no TWRP. Tried adb install, which failed:
Desktop>adb install eu.chainfire.supersu.apk
3017 KB/s (5904943 bytes in 1.911s)
pkg: /data/local/tmp/eu.chainfire.supersu.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]​Guess I'm partially rooted? Need some reassurance because had a little trouble flashing (which I won't explain unless I must) . Anyway, I have 5.2.0 recovery and if superuser is as expected, I'll go for post 2 (i think)! Thanks!
Click to expand...
Click to collapse
This happened to me as well... the su binary was in /system/xbin but wasn't working, and the app said I had to flash or install from the Play Store. I copied the Superuser.apk to /sdcard and installed it device side, worked fine.

Yes! thx! (Can easily get es file explorer from appstore for this.)

Thanks for this bro! I can confirm this process works, and I will show the steps I took here (clarification for people who want to do this).
1. I started on 4.5.4 + Root + TWRP with adb installed on my Mac
2. I connected fire to computer, and did (in terminal window)
adb backup -apk -shared -all ~/Downloads
to save my data before factory reset (this should work on Mac + Linux).
3. Rebooted to TWRP
4. Performed a Factory Reset (the default one under Wipe on TWRP)
5. Installed the 5.2.0 bin file with adb sideload
6. Installed 5.20 stock recovery with adb sideload
7. Went to Reboot page and chose reboot recovery
8. TWRP will prompt you to install root, do it
9. It will then reboot into stock Amazon recovery, choose to reboot your system
10. Mine took forever, but it finally booted into 5.2.0
11. If you're plugged into the computer, it gives you the option to enable usb debugging, do this
12. I completed the setup process
13. Downloaded SupersSU from here on computer
14. Used
adb install -r supersu.apk
(or whatever your's is named)
15. Check you have root by running
adb shell
su
16. You should have root installed!
17. Now run
adb restore backup.ab
which will restore your data (apps)
18. SKIP UNLESS YOU HAD XPOSED INSTALLED If you had Xposed installed, it is not compatible now, so uninstall all of your modules (if you want to save space). I believe the problem with Xposed is that we need to change a build.prop sdk/api value, but that's something for us to figure out later.
19. Install jmz fire tools from here
20. Run it and choose install Gapps, your device will reboot
21. Sucess!!! Lollipop + Root + Gapps
Anyways, good luck to everyone I hope this helps someone in the future!
---------- Post added at 10:33 AM ---------- Previous post was at 10:32 AM ----------
DoLooper said:
Yahoo! I'm either almost there or am no longer rooted. adb shell, su doesn't return #-sign, but I can "cd" and "ls" all around /system. SuperSU installer says I'm "not fully rooted," but if you press Play (store) Amazon wants to open appstore of course, and no TWRP. Tried adb install, which failed:
Desktop>adb install eu.chainfire.supersu.apk
3017 KB/s (5904943 bytes in 1.911s)
pkg: /data/local/tmp/eu.chainfire.supersu.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]​Guess I'm partially rooted? Need some reassurance because had a little trouble flashing (which I won't explain unless I must) . Anyway, I have 5.2.0 recovery and if superuser is as expected, I'll go for post 2 (i think)! Thanks!
Click to expand...
Click to collapse
pcrhckyman said:
Managed to get the upgrade from reading the last thread, but no TWRP. Thanks!!
This happened to me as well... the su binary was in /system/xbin but wasn't working, and the app said I had to flash or install from the Play Store. I copied the Superuser.apk to /sdcard and installed it device side, worked fine.
Click to expand...
Click to collapse
I fixed this by running
adb install -r eu.chainfire.supersu.apk
or whatever your supersu file is named.

Easy TWRP and Gapps?
bibikalka said:
OK, here the risk is pretty simple - likely brick. On the upside, you get to run TWRP, and then return to 5.2.0.
Click to expand...
Click to collapse
Remolten said:
I fixed this by running adb install -r eu.chainfire.supersu.apk or whatever your supersu file is named.
Click to expand...
Click to collapse
Yep, still learning, and thanks for the detailed steps.
Why not adb install (or file explorer install) Flashify or TWRP manager, install TWRP, and then Gapps? Or for that matter, use Flashify to install Gapps? Thanks.

As far as GAPPS, go the lazy way of using JMZs app just worked for me. I'll be removing the modifications that prevent the apps from updating shortly. But the old playstore works fine on lolipop.

DoLooper said:
Yep, still learning, and thanks for the detailed steps.
Why not adb install (or file explorer install) Flashify or TWRP manager, install TWRP, and then Gapps? Or for that matter, use Flashify to install Gapps? Thanks.
Click to expand...
Click to collapse
I don't think the Flashify method works, but I will try it.
EDIT: Flashify requires custom recovery
EDIT 2: Trying siegesoldier's method
EDIT 3: We have a winner! Thanks siegesoldier and jmz!

siegesoldier said:
As far as GAPPS, go the lazy way of using JMZs app just worked for me. I'll be removing the modifications that prevent the apps from updating shortly. But the old playstore works fine on lolipop.
Click to expand...
Click to collapse
Thx for info, but JMZ's TWRP manager is crashing on me.

DoLooper said:
Thx for info, but JMZ's TWRP manager is crashing on me.
Click to expand...
Click to collapse
This one silly!
http://forum.xda-developers.com/fir...ool-jmz-fire-hd-7-tool-gapps-disable-t3113655

siegesoldier said:
This one silly!
Click to expand...
Click to collapse
lol thx. (Sorry for taking up more space here, but that was funny!)

FYI. Xposed is possible if you downgrade back to 4.5.3/twrp and after flashing lolipop, but before replacing recovery, flash xposed-v67-sdk22-arm-by-romracer-20150716.zip found in http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979 and install XposedInstaller_3.0_alpha4.apk once you're back into lolipop found here http://forum.xda-developers.com/showthread.php?t=3034811.

bibikalka said:
OK, fellas, 1st attempt for a reasonably safe journey to rooted Lollipop. The key now is to flash 5.2.0 recovery right after flashing 5.2.0 stock, this way there is an option to recover if something goes wrong.
Disclaimer : most of the info is compiled from other threads. Myself, I have tested flashing the attached 5.2.0 stock recovery zip from TWRP, it works fine.
Big credit here hawkazn for blazing the trail, and getting to a working rooted Lollipop first, then dumping the stock recovery:
http://forum.xda-developers.com/showpost.php?p=62009468&postcount=75
0) I assume you have TWRP installed and working, which means you've followed the guide to step 3) only, [and skip all the steps after 3) , since nobody is going to care, no extra credit here!]:
http://forum.xda-developers.com/fire-hd/general/root-v2-0-fireos-4-5-4-gapps-t3150613
1) boot into TWRP, and, in a single session (!!!!!)
do factory reset,
flash the 5.2.0 update from this post (the official 5.2.0 zip will work just fine):
http://forum.xda-developers.com/fire-hd/general/lolipop-ota-capture-t3141810
flash the attached 5.2.0_stock_recovery_only.zip
and finally, when TWRP asks you to install root, say "yes"
Let's pause for a second and realize what we did here - we've put full stock 5.2.0, added root, and, most importantly, overwrote TWRP with 5.2.0 stock recovery.
2) reboot to recovery, you should see stock 5.2.0 recovery
3) reboot to 5.2.0 OS, and hopefully, it works. Install SuperSu to manage root requests.
4) if step 3) fails, you get into working 5.2.0 recovery by pressing "Pwr & Vol+". At this point you sideload 4.5.3 stock, and go back to step 0). Come back here and ask questions.
You may be asking about GAPPS - try to install manually, as indicated here :
http://forum.xda-developers.com/showpost.php?p=62008212&postcount=71
More experimental stuff in the next post.
Click to expand...
Click to collapse
Glad I was able to help out and get it working for everyone!

Fantastic effort in a short period of time !!! The sales of HDs and "brick" returns will surely skyrocket
Also, noting the confusion with TWRP, I've updated my post #2 to explain exactly why all that stuff needs to be done to run TWRP :
http://forum.xda-developers.com/showpost.php?p=62011272&postcount=2
DoLooper said:
Yep, still learning, and thanks for the detailed steps.
Why not adb install (or file explorer install) Flashify or TWRP manager, install TWRP, and then Gapps? Or for that matter, use Flashify to install Gapps? Thanks.
Click to expand...
Click to collapse
TWRP is not signed, and will not run with the bootloader from 5.2.0 which expects a signed recovery. That's was the whole reason to do the "circus" with 3 dd's, basically, one needs to flash all the bootloaders in the chain from 4.5.3, together with TWRP to be able to boot into TWRP. After that, one would reflash back all the bootloaders and recovery back to 5.2.0 versions.
Remolten said:
I don't think the Flashify method works, but I will try it.
EDIT: Flashify requires custom recovery
EDIT 2: Trying siegesoldier's method
EDIT 3: We have a winner! Thanks siegesoldier and jmz!
Click to expand...
Click to collapse
See the above answer, to get into TWRP, you have to flash all 3 files together. But itself, TWRP does not boot from 5.2.0 bootloaders, that's why people had bricks before when they did not replace TWRP after flashing 5.2.0
siegesoldier said:
FYI. Xposed is possible if you downgrade back to 4.5.3/twrp and after flashing lolipop, but before replacing recovery, flash xposed-v67-sdk22-arm-by-romracer-20150716.zip found in http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979 and install XposedInstaller_3.0_alpha4.apk once you're back into lolipop found here http://forum.xda-developers.com/showthread.php?t=3034811.
Click to expand...
Click to collapse
Ha-ha, love Alex' 3rd Fire! Must have chewed through 2 previous ones Indeed, you can run TWRP, provided it's booted via 4.5.3 bootloaders. And after flashing 5.2.0 in TWRP, that's the last time you see TWRP booted up unless you then "dd" them back as in my post #2.
I will update that post to make these points more clear.

hawkazn said:
Glad I was able to help out and get it working for everyone!
Click to expand...
Click to collapse
Yep, thanks for making the 5.2.0 into a dull flashing experience instead of the nail biting one !!!

I am loving this good-looking and way more customizeable update! Thanks again!
bibikalka said:
That's was the whole reason to do the "circus" with 3 dd's, basically, one needs to flash all the bootloaders in the chain from 4.5.3, together with TWRP to be able to boot into TWRP. After that, one would reflash back all the bootloaders and recovery back to 5.2.0 versions.
Click to expand...
Click to collapse
If one wanted to, the 3 dds circus could still be done any time, right? So if we wanted to slap on TWRP for a quick flash we could do that?
Speaking for myself, getting Gapps turned out to be a priority once I saw lollipop on the Fire. And the "JMZ tool/allow update" method was both expedient and didn't include the phrase, "likely brick"

DoLooper said:
I am loving this good-looking and way more customizeable update! Thanks again!
If one wanted to, the 3 dds circus could still be done any time, right? So if we wanted to slap on TWRP for a quick flash we could do that?
Speaking for myself, getting Gapps turned out to be a priority once I saw lollipop on the Fire. And the "JMZ tool/allow update" method was both expedient and didn't include the phrase, "likely brick"
Click to expand...
Click to collapse
Ha-ha, true, saying "likely brick" is poor marketing. I'll rephrase it to something more benign

Disable ota on rooted 5.20
bibikalka said:
OK, fellas, 1st attempt for a reasonably safe journey to rooted Lollipop. The key now is to flash 5.2.0 recovery right after flashing 5.2.0 stock, this way there is an option to recover if something goes wrong.
Disclaimer : most of the info is compiled from other threads. Myself, I have tested flashing the attached 5.2.0 stock recovery zip from TWRP, it works fine.
Big credit here hawkazn for blazing the trail, and getting to a working rooted Lollipop first, then dumping the stock recovery:
http://forum.xda-developers.com/showpost.php?p=62009468&postcount=75
0) I assume you have TWRP installed and working, which means you've followed the guide to step 3) only, [and skip all the steps after 3) , since nobody is going to care, no extra credit here!]:
http://forum.xda-developers.com/fire-hd/general/root-v2-0-fireos-4-5-4-gapps-t3150613
1) boot into TWRP, and, in a single session (!!!!!)
do factory reset,
flash the 5.2.0 update from this post (the official 5.2.0 zip will work just fine):
http://forum.xda-developers.com/fire-hd/general/lolipop-ota-capture-t3141810
flash the attached 5.2.0_stock_recovery_only.zip
and finally, when TWRP asks you to install root, say "yes"
Thanks to Remolten, there is a very detailed write up regarding all of this:
http://forum.xda-developers.com/showpost.php?p=62018692&postcount=6
Note that this is the last time you see TWRP (unless you do what I recommend in post #2), so take an opportunity to flash other stuff such as Xposed, thanks to siegesoldier for pointing this out (not sure about GAPPS yet without at least one reboot into 5.2.0):
http://forum.xda-developers.com/showpost.php?p=62021411&postcount=13
Let's pause for a second and realize what we did here - we've put full stock 5.2.0, added root, and, most importantly, overwrote TWRP with 5.2.0 stock recovery.
2) reboot to recovery, you should see stock 5.2.0 recovery (this is just to see if it works, for troubleshooting, but otherwise a meaningless step from the update perspective ...)
3) reboot to 5.2.0 OS, and hopefully, it works. Install SuperSu to manage root requests.
4) if step 3) fails, you get into working 5.2.0 recovery by pressing "Pwr & Vol+". At this point you sideload 4.5.3 stock, and go back to step 0). Come back here and ask questions.
You may be asking about GAPPS - install them via JMZ tool, there are reports that everything works just fine:
http://forum.xda-developers.com/fir...ool-jmz-fire-hd-7-tool-gapps-disable-t3113655
More experimental stuff in the next post, this is how to get into TWRP again with 5.2.0 installed.
Click to expand...
Click to collapse
Is it necessary to disable ota after upgrading to 5.2.0 with root? If so. How?

Brofreeman said:
Is it necessary to disable ota after upgrading to 5.2.0 with root? If so. How?
Click to expand...
Click to collapse
I'm not sure if it is required, but it is a good precaution just in case. If you install the JMZ tool, the third page has a switch to disable OTA's.

[How to] Upgrade to 4.5.5.1 (or other 4.5.x) with root in TWRP:

Update2: Updated for FireOS 4.5.5.1. Note that you can root 4.5.5.1 directly via Kingroot. With root, you could get TWRP to work, and re-install any FireOS 4 or 5 with all the goodies. The instructions to get TWRP working are here (you need to flash 4.5.3 bootloaders if you do not start with FireOS 4.5.3 !!!) : http://forum.xda-developers.com/showpost.php?p=62011272&postcount=2
Update: I had a couple of knee-jerks, but realized that I can make TWRP say "full_ariel" (I've changed the string), which enables the standard Amazon update files to work !!! I did test the modified TWRP (and the attached zips), everything works fine.
This 4.5.5 update provides no perceptible difference with 4.5.4, and everything has been running smoothly for me for the past few weeks. So out of the general principle I do recommend upgrading!
If you are just joining us, and have a pristine Fire HD, head over here to get your fire rooted and TWRP installed [all steps up to and including 3) ] :
http://forum.xda-developers.com/fire-hd/general/root-v2-0-fireos-4-5-4-gapps-t3150613
With TWRP installed, there is a quicker way to install 4.5.5, without changing the update file (in contrast to my earlier instructions for 4.5.4). This is a dirty flash, and will keep all the prior settings and programs (if you have not had GAPPS yet, see additional instructions below):
0) Turn off wireless (airplane mode)
If you used JMZ tool for GAPPS install or did a manual update prevention, clean up GAPPS update blockers by deleting the following dirs in /data/app (this will make your life easier later on!):
com.android.vending-1.apk
com.android.vending-2.apk
com.google.android.gms-1.apk
com.google.android.gms-2.apk
1) Boot into TWRP, flash the attached 4.5.3_twrp_recovery_full_ariel_string.zip. Reboot to recovery (TWRP)
2) While in TWRP (this modified version self-identifies as full_ariel) :
a) flash the respective Amazon ROM 4.5.x update (the latest one?): http://forum.xda-developers.com/fire-hd/general/fire-hd-rom-links-t3173102 (rename to zip before flashing)
b) Must do this (!!!) - flash attached 4.5.3_twrp_recovery_uboot.zip
c) flash attached make_space_v01_fireos4.zip to remove moffice and weather in order to increase space in /system.
d) flash Pico (Uni) GAPPS for KK http://www.androidrootz.com/2015/03/download-android-44x-kitkat-pa-gapps.html [if you did not have GAPPS before, skip this for now, and come back after Step 3) ]
e) wipe cache and dalvik
f) before reboot say yes to root
3) Boot into fireOS (wait for it to upgrade)
a) install SuperSu
b) disable OTA updates [in ES Explorer rename /system/priv-app/DeviceSoftwareOTA.apk to *apk_ ] - The script in make_space*zip already renamed this file automatically, so nothing to do here.
c) install Xposed. Note if you are using 4.5.5.1, you'll need to get the Xposed installer from here in order to address SDK version 19 error :
http://forum.xda-developers.com/showpost.php?p=64063168&postcount=62
d) install Busybox
Optional 4) : if you did not install GAPPS in 2), boot to TWRP, and install GAPPS
That's it! Whatever you had working before, should be working now the exact same way.
If you prefer a manual way where you repackage the 4.5.5 update file (and perhaps remove some apps from /system), see these instructions (the updater-script is the same) :
http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-4-5-4-twrp-root-t3141648

Receiving error updating from 4.5.4 while attempting to flash the update in TWRP:
This package is for "full_ariel" products: this is a "omni_ariel"
E:Error executing updater binary in zip '/sdcard/Download/update-kindle-20.1.5.5_user_455001420.zip'
Click to expand...
Click to collapse

Sario27 said:
Receiving error updating from 4.5.4 while attempting to flash the update in TWRP:
Click to expand...
Click to collapse
Yep, indeed! I wonder if TWRP could be patched such that the device is being identified as "full_ariel" even when rooted. Otherwise repackaging these ROM zips is a chore ...

bibikalka said:
Yep, indeed! I wonder if TWRP could be patched such that the device is being identified as "full_ariel" even when rooted. Otherwise repackaging these ROM zips is a chore ...
Click to expand...
Click to collapse
Having said that... is there a version of 4.5.5 that will work with root? I can repackage myself I suppose, but it is a mess to navigate that script...

Sario27 said:
Receiving error updating from 4.5.4 while attempting to flash the update in TWRP:
Click to expand...
Click to collapse
meatwad12 said:
Having said that... is there a version of 4.5.5 that will work with root? I can repackage myself I suppose, but it is a mess to navigate that script...
Click to expand...
Click to collapse
I've updated the instructions. As the first step, you flash the modified recovery (which says "full_ariel"). This modified recovery will accept the standard Amazon update file. After the update is done, I have you flash the standard TWRP back (just in case) together with 4.5.3 bootloaders.

I don't understand new title, "Upgrade to 4.5.5 (or any 4.5.x) with root in TWRP:" Isn't this just for upgrading to 4.5.5? The files are for 4.5.5, so you wouldn't use it to upgrade to 4.5.4, right? (Yes, I'm going to post a pointer to all the guides. The choices are confusing even me, and I practically live here!) Also, if you see fit, could you add [How To] to title so this stands out with other upgrade guides? yr friend, Do consistency-my-middle-name Looper.

DoLooper said:
I don't understand new title, "Upgrade to 4.5.5 (or any 4.5.x) with root in TWRP:" Isn't this just for upgrading to 4.5.5? The files are for 4.5.5, so you wouldn't use it to upgrade to 4.5.4, right? (Yes, I'm going to post a pointer to all the guides. The choices are confusing even me, and I practically live here!) Also, if you see fit, could you add [How To] to title so this stands out with other upgrade guides? yr friend, Do consistency-my-middle-name Looper.
Click to expand...
Click to collapse
Wow, you are a hard man to please I've put a few changes in there, trying to make it more clear.
The procedure works for 4.5.4 as well, so that's why I try to keep things fairly generic.

bibikalka said:
The procedure works for 4.5.4 as well, so that's why I try to keep things fairly generic.
Click to expand...
Click to collapse
So would you say this supercedes http://forum.xda-developers.com/fire-hd/general/root-v2-0-fireos-4-5-4-gapps-t3150613? Is this method "better?' thx

DoLooper said:
So would you say this supercedes http://forum.xda-developers.com/fire-hd/general/root-v2-0-fireos-4-5-4-gapps-t3150613? Is this method "better?' thx
Click to expand...
Click to collapse
Potentially this will supersede this :
http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-4-5-4-twrp-root-t3141648
The difference is mainly not having to mess around with the update file (which has it's uses, if one wants to shrink the size of "system").

bibikalka said:
I've updated the instructions. As the first step, you flash the modified recovery (which says "full_ariel"). This modified recovery will accept the standard Amazon update file. After the update is done, I have you flash the standard TWRP back (just in case) together with 4.5.3 bootloaders.
Click to expand...
Click to collapse
This worked great for me. I have 4.5.5 running with the stock amazon ROM after following these instructions. Great work thank you!
---------- Post added at 03:19 PM ---------- Previous post was at 02:24 PM ----------
One problem...
I'm having a heck of a time trying to block ads in 4.5.5. I've tried the adb command pm disable com.amazon.kindle.kso/com.amazon.kindle.kso.lockscreen.lockscreenupdateS ervice as mentioned in another thread but with no luck. Did Amazon change something in the structure of 4.5.5 that renders this method unworkable? Is there another way?

meatwad12 said:
I'm having a heck of a time trying to block ads in 4.5.5. I've tried the adb command pm disable com.amazon.kindle.kso/com.amazon.kindle.kso.lockscreen.lockscreenupdateS ervice as mentioned in another thread but with no luck. Did Amazon change something in the structure of 4.5.5 that renders this method unworkable? Is there another way?
Click to expand...
Click to collapse
Did you put a space in "S ervice?" There is none, but it may display that way. So if you did, do it with no space and reboot afterwards if ads don't go away immediately. The other way is JMZ fire tool, but that does a chmod on ad folder and displays the "killed ads" message with every boot.
Please let me know if the pm block pm disable works or not. Thanks!

Looks like I'm good! I tried it several different ways (block vs. disable; with space and without) and it appears to have taken hold after a reboot. We can chalk this one up to user error. Thanks for the response.

meatwad12 said:
Looks like I'm good! I tried it several different ways (block vs. disable; with space and without) and it appears to have taken hold after a reboot. We can chalk this one up to user error. Thanks for the response.
Click to expand...
Click to collapse
Or u can upgrade to lollipop. Ads are disabled by default on lollipop. Here is the thread to lollipop with root. http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-lollipop-root-gapps-t3163950

I followed the instructions and tried flashing gapps before the initial boot into 4.54 and also after booting but I get the same error. "insufficient storage space available in system partition"
I am flashing this version
pa_gapps-modular-pico(uni)-4.4.4-20150308-signed.zip it is 39,105kb.
this is on the 8gb model of the kindle hd 7, not sure if the 16 has a bigger system partition

mehmehmeh said:
I followed the instructions and tried flashing gapps before the initial boot into 4.54 and also after booting but I get the same error. "insufficient storage space available in system partition"
I am flashing this version
pa_gapps-modular-pico(uni)-4.4.4-20150308-signed.zip it is 39,105kb.
this is on the 8gb model of the kindle hd 7, not sure if the 16 has a bigger system partition
Click to expand...
Click to collapse
Did you flash the older 4.5.4 ? Or the newer 4.5.5 ?
Can you check how much free space you have in /system as is? (DiskUsage app in the store)
In any event, and easy quick hit (20Mb) is to remove something like /system/priv-app/moffice_6.0.1_default_en00105_multidex_195423.apk
You can remove more, as per this :
http://forum.xda-developers.com/showpost.php?p=61008736&postcount=3

flashed the newer 4.5.5. Will try later tonight, didn't get the amazon update disabled and woke up to a fire os 5 tablet. So I have to downgrade again

mehmehmeh said:
flashed the newer 4.5.5. Will try later tonight, didn't get the amazon update disabled and woke up to a fire os 5 tablet. So I have to downgrade again
Click to expand...
Click to collapse
Well, as they say, practice makes perfect !
I am surprised it managed to install itself with TWRP present instead of the stock recovery ...

Can you please upload the attachments to a file hoster cause the servers from xda are slow 14 kbps and downloads cancels!

bibikalka said:
Did you flash the older 4.5.4 ? Or the newer 4.5.5 ?
Can you check how much free space you have in /system as is? (DiskUsage app in the store)
In any event, and easy quick hit (20Mb) is to remove something like /system/priv-app/moffice_6.0.1_default_en00105_multidex_195423.apk
You can remove more, as per this :
http://forum.xda-developers.com/showpost.php?p=61008736&postcount=3
Click to expand...
Click to collapse
Thanks for the tip!
Ran into the same issue while trying to upgrade my rooted 4.5.3 gapps Firehd 7..

Mhm Ok now I'm running into issues when trying to update the google play services, it always fails saying "not enough space available".
http://forum.xda-developers.com/showpost.php?p=61008736&postcount=3
I've moved all the odexed system APKs mentioned in this post to /data/apps and I have 1.5gb free on the "sdcard".
:/
*Edit*
Nvm, found the reason...it's because I allready had gapps installed through jmz's tool and it blocked play services updates from being installed, because back then a play services update would break the entire thing again.
So I had to do these additional steps from this thread: http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-4-5-4-twrp-root-t3141648
0) If you used JMZ tool for GAPPS install or did a manual update prevention, clean up GAPPS update blockers by deleting the following dirs in /data/app (this will make your life easier later on!):
com.android.vending-1.apk
com.android.vending-2.apk
com.google.android.gms-1.apk
com.google.android.gms-2.apk
Click to expand...
Click to collapse
@op maybe include it in your updated guide for ppl who allready had gapps and used jmzs handy tool a couple months ago.

Stop !!! Do not upgrade to lollipop via twrp !!!

Update : Oct 24, 2015 It looks like the bricking scare is over, and there is an updated guide on how to upgrade to the latest Lollipop without bricking :
http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-lollipop-root-gapps-t3163950
PUBLIC SERVICE ANNOUNCEMENT :
There are now several reports of super hard bricks (not even Amazon logo shows up) when people attempted to load 5.2.2 version via TWRP.
My best guess is that it has something to do with the 5.x update from Amazon that people request before downgrading to 4.5.3. If Amazon is providing a newer 5.x. update, it can be blocking the older 5.2.2 from working after the downgrade-upgrade procedure. When it bricked before, it would at least show "Amazon" logo, but now even the logo is gone.
One would have to capture this current 5.x update, and see what's in it. It's probably updating another partition out of those that were previously untouched :
http://forum.xda-developers.com/fire...idden-t3122246
All the downgrade-upgrade guides are on hold for now ... You are still safe to exist in the 4.5.x space (with root).

bibikalka said:
One would have to capture this current 5.x update, and see what's in it.
Click to expand...
Click to collapse
I assume I can capture file by reversing rename of DeviceSoftwareOTA.apk but leaving OTA updating blocked. Is that the method?
EDIT: Well, just did rename. No download yet. I've got otaverifier blocked. If nothing soon, I'll enable that and block dcp.

This update was strange and left a very small .data file in cache after saying a download was complete, ready to upgrade. Could not locate a bin file. I will/would try capturing a link via adb logcat.
could be a small update that just preps us to move back to the normal releases.
Just educated guesses.

siegesoldier said:
This update was strange and left a very small .data file in cache after saying a download was complete, ready to upgrade. Could not locate a bin file. I will/would try capturing a link via adb logcat.
could be a small update that just preps us to move back to the normal releases.
Just educated guesses.
Click to expand...
Click to collapse
All that downloaded for me were apk update files, no .data, but device>updates shows:
10.0.42-D-20150925-NA-4 is ready to install
I ran logcat during download and a couple of manual installs (pressing Install button, but I do have updates blocked). I didn't see anything obviously related to update in the logcats, but not sure what to look for. Since I didn't get the .data, will I find anything helpful in logcat? What should I look for? thx
p.s., Or must I unblock updating to capture?

siegesoldier said:
This update was strange and left a very small .data file in cache after saying a download was complete, ready to upgrade. Could not locate a bin file. I will/would try capturing a link via adb logcat.
could be a small update that just preps us to move back to the normal releases.
Just educated guesses.
Click to expand...
Click to collapse
Yep, this is weird. I wonder if one should flash 4.5.3 bootloaders with TWRP in Lollipop first as per this post http://forum.xda-developers.com/showpost.php?p=62011272&postcount=2 , and let it try to upgrade. This way whatever files it downloads, they will be sitting in /cache. But nothing will be run as it is a non-Amazon recovery.
Another poster indicated that the tablet rebooted about 3 times, and then he got new icons and Amazon launcher :
http://forum.xda-developers.com/showpost.php?p=63116048&postcount=141

bibikalka said:
I wonder if one should flash 4.5.3 bootloaders with TWRP in Lollipop first as per this post http://forum.xda-developers.com/showpost.php?p=62011272&postcount=2 , and let it try to upgrade. This way whatever files it downloads, they will be sitting in /cache. But nothing will be run as it is a non-Amazon recovery.
Click to expand...
Click to collapse
I'm more than willing to try to capture this if one of you can tell me how.
I don't quite follow the above. I'm running rooted 5.2.2. So I'd flash bootloaders and TWRP per guide, install OS 4.5.5, boot to OS and try to upgrade? Is this any different from someone already on 4.5.5 trying to upgrade? thx

DoLooper said:
I'm more than willing to try to capture this if one of you can tell me how.
I don't quite follow the above. I'm running rooted 5.2.2. So I'd flash bootloaders and TWRP per guide, install OS 4.5.5, boot to OS and try to upgrade? Is this any different from someone already on 4.5.5 trying to upgrade? thx
Click to expand...
Click to collapse
Not this complicated. I think you could flash 4.5.3 bootloaders + TWRP under 5.2.2, enable OTA updates, and continue working. When it decides to self-reboot (after the update is copied to /cache), it won't find stock 5.2 recovery. Instead, it'll hang (4.5.3 bootloaders cannot boot 5.2.2). At this point you can manually reboot into TWRP, and see what's in /cache. Then you just reapply 5.2.0 bootloaders + 5.2.0 recovery, and boot back into 5.2.2 (and do disable OTA here !!!) Hopefully it does not write into recovery partition before auto-rebooting, so that TWRP survives intact.

bibikalka said:
Not this complicated. I think you could flash 4.5.3 bootloaders + TWRP under 5.2.2, enable OTA updates, and continue working. When it decides to self-reboot (after the update is copied to /cache), it won't find stock 5.2 recovery. Instead, it'll hang (4.5.3 bootloaders cannot boot 5.2.2). At this point you can manually reboot into TWRP, and see what's in /cache. Then you just reapply 5.2.0 bootloaders + 5.2.0 recovery, and boot back into 5.2.2 (and do disable OTA here !!!) Hopefully it does not write into recovery partition before auto-rebooting, so that TWRP survives intact.
Click to expand...
Click to collapse
OK, I'll try this later or tomorrow. Still wonder though, couldn't you--anyone on 4.5.5--leave OTA package blocked but rename OTAsoftware extension back to apk, allowing the update to download but not install?

)':
Hello, I am french sorry for my english
My kindle fire is bricked
how to repair !! :crying::crying:
help me please :/

bibikalka said:
. . . At this point you can manually reboot into TWRP, and see what's in /cache. Then you just reapply 5.2.0 bootloaders + 5.2.0 recovery, and boot back into 5.2.2 (and do disable OTA here !!!) Hopefully it does not write into recovery partition before auto-rebooting, so that TWRP survives intact.
Click to expand...
Click to collapse
@bibikalka OK, ready to do this and (more or less) prepared to get replacement Fire . Just one question: Why do you think there will be anything in cache after the update and reboot attempt? i.e., wouldn't deleting it be part of the update process? Thanks! (Edit: NVM--I see your explanation above.)
EDIT @bibikalka, @everyone Thought the update was out for my region, but guess not: With DeviceSoftareOTA.apk named as originally and otaverifier enabled, Device>Updates just returns "no updates." Disabled otaverifier again and will wait on this.
I believe the update will download with DeviceSoftwareOTA.apk properly named--and hope it won't update with otaverifier disabled. So maybe I can get it. Anyway, I'll check for it over next few days, but maybe someone else will try this method first. (I am west-coast US and it seems always last to get updates.)

DoLooper said:
@bibikalka OK, ready to do this and (more or less) prepared to get replacement Fire . Just one question: Why do you think there will be anything in cache after the update and reboot attempt? i.e., wouldn't deleting it be part of the update process? Thanks!
Click to expand...
Click to collapse
I think it will prepare to update by staging the required files in /cache, but then it'll try to reboot to apply those files (usually updates are applied in recovery ...). So when reboot fails (as it should with TWRP & 4.5.3 bootloaders which don't boot Lollipop), you intercept the stuff in /cache and see what it has.
Added: If this works, do wipe /cache before leaving TWRP (when you restore 5.2 bootloaders). This way it won't pick up the scripts and run them ...

See edit here. Forgot that I'm always last to get an upgrade. Hope someone who might get it sooner will use bibkalka's method so we can get this show back on the road.

After downloading the 5.0.1 update once I have been unable to get it again. My build number has not updated so its possible they pulled it. Root etc still works so it doesn't look like it applied.

Hello, just wanted to say that I can testify to the fact that after updating to 5.2.2, then downgrading and going into TWRP, flashing all the zips, and then wiping cache before rebooting..... gets you a BRICK!! I've stupidly done it.... to my replacement from Amazon! Hopefully sometime in the future someone can get me out of this one....

hello there recently my rooted fire os 5 with xposed playstore just updated to 5.0.1 by it self and i swear i did have com.amazonotaverifier blocked its weird because it updated when i left my fire hd 6 on charge
it just updated itself to fire os 5.0.1 il stay on that fire os because people are saying you get bricked if you do the whole procedure like downgrade back to 4.5.3 and root and get custom recovery and flash all the zips = brick

2nd try to get 5.0.1 update
I didn't capture the update, but maybe learned something about OTA. Two things I hope someone can explain.
First, I've had extension of DeviceSoftwareOTA.apk renamed back to (plain) .apk since last attempt to capture update. Today:
1. "Check for updates" returned: 10.0.43.-D-20151007-NA-5 is ready to install
(last week there was one named: 10.0.42-D-20150925-NA-4)
2. I dd'd the 4.5.3 bootloaders and twrp (with otaverifier blocked)
3. Unblocked otaverifier, but the only thing that downloaded to /cache was "amazonmp3_10004310.apk" (update to mp3 player, i guess).
(last week they were apks for map and photo apps)
4. Hit "check for updates" again, but now it said "none" and /cache was empty.
(same thing last week)
Does anyone know about updates named like "10.0.43.-D-20151007-NA-5?" I've only seen them since I "corrected" the deviceSoftwareOTA.apk extension, and only apk files get downloaded. A couple logcats I got, however, have many more update entries than I've seen before, but I don't understand logcats very well. If someone who knows logcats could have a look, I'd appreciate it. Just tell me where to post. I think it would help us to know if these updates do more than update the accompanying apks.
------------------------
EDIT: NVM below! I'm getting # prompt because I recently set "adbd insecure" app to start at boot <doh> .
Second, I decided to start over and see if there was a different update waiting. So:
1. Went to twrp and flashed 5.2.0_stock_recovery_uboot.zip (for 5.0 stock recovery and bootloaders, i hope), wiped cache, and booted to OS.
2. Got l o o o n g startup. When OS finally loaded, "adb shell" hung CMD. I had to run TASKKILL /F /IM adb* >nul 2>&1 before adb shell was recognized. And when it was, it consistently returned # prompt: ([email protected]:/ #)
I'm definitely rooted, all google works, version still shows 5.0.0, build date July 20, but even after rebooting both tablet and computer, "adb shell" still always returns # prompt.
Can anyone tell me what's going on here? (Sorry this is tldr; hope a few of you slog through.) Thanks.
EDIT: it's late, maybe I'm nuts, but seems "adb shell" should return $ prompt, then "su" returns #.

DoLooper said:
I didn't capture the update, but maybe learned something about OTA. Two things I hope someone can explain.
First, I've had extension of DeviceSoftwareOTA.apk renamed back to (plain) .apk since last attempt to capture update. Today:
1. "Check for updates" returned: 10.0.43.-D-20151007-NA-5 is ready to install
(last week there was one named: 10.0.42-D-20150925-NA-4)
2. I dd'd the 4.5.3 bootloaders and twrp (with otaverifier blocked)
3. Unblocked otaverifier, but the only thing that downloaded to /cache was "amazonmp3_10004310.apk" (update to mp3 player, i guess).
(last week they were apks for map and photo apps)
4. Hit "check for updates" again, but now it said "none" and /cache was empty.
(same thing last week)
Does anyone know about updates named like "10.0.43.-D-20151007-NA-5?" I've only seen them since I "corrected" the deviceSoftwareOTA.apk extension, and only apk files get downloaded. A couple logcats I got, however, have many more update entries than I've seen before, but I don't understand logcats very well. If someone who knows logcats could have a look, I'd appreciate it. Just tell me where to post. I think it would help us to know if these updates do more than update the accompanying apks.
.
Click to expand...
Click to collapse
These updates appear to be just individual apps, nothing to do with the system. You can google the version numbers, and it'll find that stuff.
The only hope is to checksum all partitions, and find the one that was updated in the latest version 5, but otherwise does not change in earlier versions. One could right a script for that. Then we could overwrite it.
But I suspect the new update may have written into one of the partitions that have other stuff, so the checksum identification won't help.

bibikalka said:
The only hope is to checksum all partitions, and find the one that was updated in the latest version 5, but otherwise does not change in earlier versions. One could right a script for that. Then we could overwrite it.
But I suspect the new update may have written into one of the partitions that have other stuff, so the checksum identification won't help.
Click to expand...
Click to collapse
Would that mean 5.0.1 would not be rootable?

Hello, I am curious, would it be possible to use "fastboot boot recovery.img" instead of actually flashing it in order to get root in the new 5.2.2 (build date sep 23)? It seems this would solve the hard brick problem with flashing twrp.
I'm on a never-rooted 2014 HD6 with gapps & OS 5.2.2. Very interested in rooting this tablet.

hi,
my Eng is not good, i don't understand the title
Stop !!! Do not upgrade to lollipop via twrp !!!
on today i'm receive Fire HD 7 from my phone provider. This is free.
i was rooted it with kingroot. It was succesfull. But i want setup it with android with vietnames because my boy are 10 age.
it run fire os 4.5.3 now.
can i upgrade to android 5.x?
thank for read

OS 5.0 + ROOT + GAPPS + Play Store VIDEO TUTORIAL

Please DO NOT use this guide anymore due to bricks. Instead use an up to date guide: http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-lollipop-root-gapps-t3163950
I was debating whether to make a new thread or not but ended up doing so. First off I want to thank the people on XDA including @bibikalka , @DoLooper , and @jmz who made everything work. I'm a visual & hands-on learner so I like making these types of tutorials and I hope others who favor more visual tutorials will find them useful as well. This video guide is a combo from guides from @bibikalka (ROOT & GAPPS & OTHER) , @DoLooper (ROOT & GAPPS & OTHER) , and @jmz (TWRP).
This video tutorial explains how you can get root, GAPPS, and the Play Store on Fire OS 5.0. This video is one of the more andvanced ones and contains many steps. I take no responsibility if something happens to your device. Try to follow the video as close as you can and you sould be fine. The basic process consists of downgrading to a root vulnerable OS, rooting it and installing TWRP, then through TWRP install the new 5.0 version and then GAPPS, root, etc.
Video
www.youtube.com/watch?v=gC0nm8I3IFE
Here are the in depth steps. Follow along with video for more insight:
1.Install USB ADB drivers: https://www.youtube.com/watch?v=CyJlmTtLsIg
Download Software version 4.5.3: https://kindle-fire-updates.s3.amazonaws.com/update-kindle-20.4.5.3_user_453011120.bin
Reboot into recovery: "adb reboot recovery"
Enter sideload mode from recovery
Install v4.5.3: "adb sideload update-kindle-20.4.5.3_user_453011120.bin"
Wiipe data/ factory restet from recovery
Reboot & keep wifi off so that it does not re-update
Disable ota updates with "adb shell pm block com.amazon.dcp" and "adb shell pm block com.amazon.otaverifier"
Turn on wifi
Download kingroot from http://www.kingroot.net/ onto device
Root with app
Test root with "adb shell" and "su"
Download TWRP IMG: https://drive.google.com/file/d/0Bx_94ujbh0qobGpZcGV6aHNKT3M/view?usp=sharing
Check md5sum: 4fefd8b46ca97a2b66e4c8852d4c3396
Push recovery to device with "adb push openrecovery-twrp-2.8.6.0-ariel.img /data/local/tmp"
Go into root shell with "adb shell" and "su"
Go to /data/local/tmp/ directory: "cd /data/local/tmp/"
Install TWRP: "dd if=openrecovery-twrp-2.8.6.0-ariel.img of=/dev/block/mmcblk0p7"
Test TWRP with "adb reboot recovery"
Boot back up
Download 5.2.2 firmware: https://mega.nz/#!ZI1wTL6L!xbDNDvaJjLUWwqe8J9awAs4xNQvxreXCmZ1I6cWTLVA
Download 5.2.0 stock recovery: http://forum.xda-developers.com/attachment.php?attachmentid=3416498&d=1437711793
Download pico gapps package (Play Store etc): https://basketbuild.com/devs/TKruzze/5.1.x GApps Packages/MODULAR - Pico GApps
Download make_space zip: http://forum.xda-developers.com/attachment.php?attachmentid=3519998&d=1445918906
Move firmware, recovery, gapps, and make_space zip onto Fire internal storage
Rename 5.2.2 firmware to a .zip file instead of a .bin file so TWRP recognizes it
Reboot into TWRP: "adb reboot recovery"
STEPS 28-33 MUST BE DONE IN ONE SESSION
Do another factory reset
Flash 5.2.2 firmware
Flash 5.2.0 recovery
Flash/run make_space zip to clear up system space
Flash Pico GAPPS zip
Choose reboot into recovery from TWRP and tell TWRP that you would like to install superSU
Reboot device and wait for it to boot up (will take about ten minutes)
After booted up, disable ota updates with "adb shell", "su", "pm disable com.amazon.otaverifier", and "pm enable com.amazon.dcp"
Update SuperSU from Play Store, open it and choose to install normally
Root, GAPPS, and Play Store should all be working now
Click to expand...
Click to collapse
Notes:
Do not try to re-flash TWRP the same way you did on 4.4.3. It will not work
Click to expand...
Click to collapse
Links & Downloads:
•XDA Guide: http://forum.xda-developers.com/fire-hd/general/how-to-upgrade-to-lollipop-root-gapps-t3163950
•USB driver tutorial: https://www.youtube.com/watch?v=CyJlmTtLsIg
•4.5.3 software: https://kindle-fire-updates.s3.amazonaws.com/update-kindle-20.4.5.3_user_453011120.bin
•KingRoot: http://www.kingroot.net/
•TWRP image: https://drive.google.com/file/d/0Bx_94ujbh0qobGpZcGV6aHNKT3M/view?usp=sharing
•5.2.2 firmware: https://mega.nz/#!ZI1wTL6L!xbDNDvaJjLUWwqe8J9awAs4xNQvxreXCmZ1I6cWTLVA
•5.2.0 stock recovery: http://forum.xda-developers.com/attachment.php?attachmentid=3416498&d=1437711793
•pico gapps package (Play Store etc): https://basketbuild.com/devs/TKruzze/5.1.x GApps Packages/MODULAR - Pico GApps
•make_space zip: http://forum.xda-developers.com/attachment.php?attachmentid=3519998&d=1445918906
Click to expand...
Click to collapse

Detailed tutorial
Will try later today.

Thanks a lot for the video. Used it and got everything working no problems!

argrr101 said:
Thanks a lot for the video. Used it and got everything working no problems!
Click to expand...
Click to collapse
Awesome to hear. Enjoy
Sent from my KFARWI using Tapatalk

powerpoint45 said:
I was debating whether to make a new thread or not but ended up doing so. First off I want to thank the people on XDA including @bibikalka , @DoLooper , and @jmz who made everything work. I'm a visual & hands-on learner so I like making these types of tutorials and I hope others who favor more visual tutorials will find them useful as well. This video guide is a combo from guides from @bibikalka (ROOT & GAPPS & OTHER) , @DoLooper (ROOT & GAPPS & OTHER) , and @jmz (TWRP).
This video tutorial explains how you can get root, GAPPS, and the Play Store on Fire OS 5.0. This video is one of the more andvanced ones and contains many steps. I take no responsibility if something happens to your device. Try to follow the video as close as you can and you sould be fine. The basic process consists of downgrading to a root vulnerable OS, rooting it and installing TWRP, then through TWRP install the new 5.0 version and then GAPPS, root, etc.
Video
www.youtube.com/watch?v=gC0nm8I3IFE
Here are the in depth steps. Follow along with video for more insight:
Notes:
Links & Downloads:
Click to expand...
Click to collapse
Got a " E: failed to verify whole-file signature" error message when trying to sideload 4.5.3 update

2006yamahaR6 said:
Got a " E: failed to verify whole-file signature" error message when trying to sideload 4.5.3 update
Click to expand...
Click to collapse
Hmm. Maybe try redownloading the update file as it cold be corrupted. I'm really not sure about this one
@DoLooper you've got any ideas?
Sent from my KFARWI using Tapatalk

@powerpoint45 Are you using the Amazon launcher or a custom one? Has anyone tried to change the launcher using the method that worked for 4.5.3?

2006yamahaR6 said:
Got a " E: failed to verify whole-file signature" error message when trying to sideload 4.5.3 update
Click to expand...
Click to collapse
powerpoint45 said:
Hmm. Maybe try redownloading the update file as it cold be corrupted. I'm really not sure about this one
@DoLooper you've got any ideas?
Click to expand...
Click to collapse
Only that a search turns up lots of hits.

argrr101 said:
@powerpoint45 Are you using the Amazon launcher or a custom one? Has anyone tried to change the launcher using the method that worked for 4.5.3?
Click to expand...
Click to collapse
I'm using a custom one. If you have root just install your custom Launcher, go into adb shell, type "su", and then "pm disable com.amazon.firelauncher"
Sent from my SPH-L710 using Tapatalk

argrr101 said:
[MENTION=4469251]Has anyone tried to change the launcher using the method that worked for 4.5.3?
Click to expand...
Click to collapse
This is for latest OS 5.0.1 (5.2.2u2). Be sure to install custom launcher first. Need to be in SU.
pm disable com.amazon.firelauncher

Thanks, got Nova Launcher up and working.

cxm170 said:
Will try later today.
Click to expand...
Click to collapse
works like a charm
. thanks

Excellent write-up I didn't even bother watching the video... My hd6 is now working as it should!
One note - I had to register with both Amazon and Google via wifi before I could update SuperSU and disable ota updates through adb. Not sure if I did something wrong, but that's how it ended up working for me.

Hello, I have tried this tutorial but I'm unable to downgrade to 4.5.3
I get a signature verification error when sending the file; the exact error from the recovery logs is:
Code:
I: failed to verify against RSA key 0
E: failed to verify whole-file signature
The installed OS version is 5.0.1 on a Fire 5th generation.
Does anyone have a solution for this problem?

Get the same error :
E:failed to verify whole-file signature
E: signature verification failed
Installation aborted
Can smone help pls?

I followed this guide to root my fire, it worked.
http://forum.xda-developers.com/amazon-fire/development/wip-achieving-root-thread-t3238152

wasted whole day, try 3 times already, doesn't work on Fire HD6, Followed all the steps, upgraded from 4.5.5 to 5.0.1 Preview, then downgraded to 4.5.3, install KingRoot to get su, install TWRP, copy all zip packages, flash them, reboot via TWRP to install superSU and after 10 minutes it shows kindle fire OS 5.0.1, and to perform step 35, no SU access any more, can't complete step 35, such a wastage of hours and hours

george9584 said:
wasted whole day, try 3 times already, doesn't work on Fire HD6, Followed all the steps, upgraded from 4.5.5 to 5.0.1 Preview, then downgraded to 4.5.3, install KingRoot to get su, install TWRP, copy all zip packages, flash them, reboot via TWRP to install superSU and after 10 minutes it shows kindle fire OS 5.0.1, and to perform step 35, no SU access any more, can't complete step 35, such a wastage of hours and hours
Click to expand...
Click to collapse
Man I am glad I read this post... I have a Gen 4 HD6 that came with 4.5.5, and I would LOVE to get root and GAPPS and make this thing work the way it should, but these tutorials are confusing as hell...
Do we use ADB+Fastboot or do we have to install ADB from the SDK? There is NO mention of this in the video tutorials... I am confused.
Not everyone uses Linux. I am on a Windows box here at work and would love to make this happen... Can anyone shed light?

Hello,
@Team Scream, I suggest you look at Imma Wake's video "Downgrade and root Fire HD6/HD7". This one is giving you all you need to move from 4.5.5 to 5.0.1 and get root rights. It's shorter(18 steps) and rather self-explanatory. As an example, I did it today without any hiccups.
I used ADB+Fastboot (the one he made a video about), but didn't had to use any fastboot command. So don't get confused, it's just a rather simple way to get ADB up and running.
If it may be of any help, just know that I had to re setup the driver in the device manager will the tab was in sideload mode.
@powerpoint45 not forgetting ppl who made this tutorial possible, I deeply thank you for the tremendous work you've done! I will give it a shot soon hopping it goes as smoothly as the guide i mention before.
All the best,
EDIT
It all went smooth and easy.
So here is my backlog:
"Fire HD6" on "Fire OS 4.5.5"
Upgrade to 5.0.1 (dev version)
Downgrad to 4.5.3 and grant ROOT access via kingroot. (followed the 18 step tutorial made prior to this one. check his youtube videos. additionnaly I did "adb shell pm block com.amazon.dcp" not mention in the 18, but 37steps tutorial just to be safe about OTA stuff)
Catch up on this tutorial at step12. Upgraded to 5.0 + ROOT + GAPPS + Play Store
@powerpoint45, You may want to swap step 35 and 36 because by the time you reach 35, you can't "su" in "adb shell". In fact, 36 is meant to allow "su" usages as far as i can tell
Due to the above "su" issue, I was scared that during the SuperSU setup(needing Wifi and prior to OTA disable) between step 34 and 36 is that some update happen eventually transforming a piece of cake into nightmare. Is it something to be worried about for ppl following your tutorial?
Lastly, the "System Updates" panel state "Fire OS 5.0.1", but isn't "5.2.2 firmware" + "5.2.0 stock recovery" suppose to increase the OS number to 5.2.X? (that's the rookie question I suppose)
Once again, thank you very much for this great video tutorial and all the best to you stepping into it.

user0x80 said:
Hello,
@Team Scream, I suggest you look at Imma Wake's video "Downgrade and root Fire HD6/HD7". This one is giving you all you need to move from 4.5.5 to 5.0.1 and get root rights. It's shorter(18 steps) and rather self-explanatory. As an example, I did it today without any hiccups.
I used ADB+Fastboot (the one he made a video about), but didn't had to use any fastboot command. So don't get confused, it's just a rather simple way to get ADB up and running.
If it may be of any help, just know that I had to re setup the driver in the device manager will the tab was in sideload mode.
@powerpoint45 not forgetting ppl who made this tutorial possible, I deeply thank you for the tremendous work you've done! I will give it a shot soon hopping it goes as smoothly as the guide i mention before.
All the best,
EDIT
It all went smooth and easy.
So here is my backlog:
"Fire HD6" on "Fire OS 4.5.5"
Upgrade to 5.0.1 (dev version)
Downgrad to 4.5.3 and grant ROOT access via kingroot. (followed the 18 step tutorial made prior to this one. check his youtube videos. additionnaly I did "adb shell pm block com.amazon.dcp" not mention in the 18, but 37steps tutorial just to be safe about OTA stuff)
Catch up on this tutorial at step12. Upgraded to 5.0 + ROOT + GAPPS + Play Store
@powerpoint45, You may want to swap step 35 and 36 because by the time you reach 35, you can't "su" in "adb shell". In fact, 36 is meant to allow "su" usages as far as i can tell
Due to the above "su" issue, I was scared that during the SuperSU setup(needing Wifi and prior to OTA disable) between step 34 and 36 is that some update happen eventually transforming a piece of cake into nightmare. Is it something to be worried about for ppl following your tutorial?
Lastly, the "System Updates" panel state "Fire OS 5.0.1", but isn't "5.2.2 firmware" + "5.2.0 stock recovery" suppose to increase the OS number to 5.2.X? (that's the rookie question I suppose)
Once again, thank you very much for this great video tutorial and all the best to you stepping into it.
Click to expand...
Click to collapse
Ok so first off thank you so much for taking the time to try and help, and forgive me for being needy.
In your post you mention following Imma Wake's video which I tried to do, but the very first step is a brick wall. The YouTube video which supposedly shows how to upgrade to the 5.0 Developer preview has been removed. It is no longer there, so that very crucial first step is one that I cannot take.
Next, in your post, you reference upgrading the Kindle HD6 using both the 5.0 Developer preview AND the 5.01 Developer preview which has me totally confused. I do not see any videos on Imma Wake you tube channel referencing the 5.01 Developer preview. The last thing I want to do is brick my brand new Kindle...
SO, once again, I am back here at square one, stuck. Any chance you can point me to the quick and easy method of upgrading to 5.0 Developer so I can get past that step? I have signed up on Amazon and the developer page indicates that my device will be upgraded within 48 hours, but I am sitting here with time on my hands today and really wanted to give this a shot today.
Thanks.