Database Users

[Q] [Newbie Question] Details about rooting

Hello all, and please help me with some small details before rooting.
I have an LG G2 with stock KITKAT 4.4.2., baseband M8974A-1.0.190084,kernel 3.4.0., build D80220b, software D80220b-219-02.
My questions
- do I need to upgrade stock firmware to D802d or D802f before rooting, and if yes wich is more stable
- is a SIM card needed (as inserted in the phone) for rooting process
- do I need to unlock the phone before rooting since it is locked with my local carrier (TELE 2 HR)
- does a custom ROM automaticly eliminate OTA upgrade and so prevent from bricking, or it must be unchecked manualy
- when installing a custom ROM (probably Cludy G3) do I need to flash a new custom kernel or it doesent mater (probably Bruce if it is compatibile)
- how does one check for compatibility ROM - kernel, is it just simple as finding "stock ROM" - "stock kernel" in the title
- do I need to instal a new KK baseband before custom ROM since I am allready on KITKAT
- do I need to do any kind of factory reset and/or wipe before rooting or later instaling a custom ROM
Thank you very much in advance, I have been searching all over for this simple answers but couldnt find any,
Sorry if the questions are too noobish but I am afraid tostart anything before I find the answers

tomarin said:
Hello all, and please help me with some small details before rooting.
I have an LG G2 with stock KITKAT 4.4.2., baseband M8974A-1.0.190084,kernel 3.4.0., build D80220b, software D80220b-219-02.
My questions
- do I need to upgrade stock firmware to D802d or D802f before rooting, and if yes wich is more stable
- is a SIM card needed (as inserted in the phone) for rooting process
- do I need to unlock the phone before rooting since it is locked with my local carrier (TELE 2 HR)
- does a custom ROM automaticly eliminate OTA upgrade and so prevent from bricking, or it must be unchecked manualy
- when installing a custom ROM (probably Cludy G3) do I need to flash a new custom kernel or it doesent mater (probably Bruce if it is compatibile)
- how does one check for compatibility ROM - kernel, is it just simple as finding "stock ROM" - "stock kernel" in the title
- do I need to instal a new KK baseband before custom ROM since I am allready on KITKAT
- do I need to do any kind of factory reset and/or wipe before rooting or later instaling a custom ROM
Thank you very much in advance, I have been searching all over for this simple answers but couldnt find any,
Sorry if the questions are too noobish but I am afraid tostart anything before I find the answers
Click to expand...
Click to collapse
1. You don't have to upgrade because you can use rooter that is compatible with your current firmware build, the differences between the firmware are only on their features, with less case of minor problem solved from previous build.
2. No, you don't need to put your SIM on.
3. Custom ROMs are meant to give you better performance of the current build, especially if it is Stock Based Custom ROM. Why you shouldn't update via OTA? because with several changes in the custom ROM, Official build will find it different from its official release, which would cause errors that could ended up with bootloop, even worse.. Hopefully, several developers also have their own OTA feature so people can easily get the update.
4. It doesn't matter since Custom ROMs sometimes come with their own suggested kernel that fit with the ROM. But you can also try other kernels if it suits you.
5. Yes, it is quite that simple, but also try to find out whether it is compatible or not with the ROM.
6. No, if you already on KitKat, you don't need to flash KK baseband.
7. Only when you are about to flashing new ROM..

Rei Zazie said:
1. You don't have to upgrade because you can use rooter that is compatible with your current firmware build, the differences between the firmware are only on their features, with less case of minor problem solved from previous build.
2. No, you don't need to put your SIM on.
3. Custom ROMs are meant to give you better performance of the current build, especially if it is Stock Based Custom ROM. Why you shouldn't update via OTA? because with several changes in the custom ROM, Official build will find it different from its official release, which would cause errors that could ended up with bootloop, even worse.. Hopefully, several developers also have their own OTA feature so people can easily get the update.
4. It doesn't matter since Custom ROMs sometimes come with their own suggested kernel that fit with the ROM. But you can also try other kernels if it suits you.
5. Yes, it is quite that simple, but also try to find out whether it is compatible or not with the ROM.
6. No, if you already on KitKat, you don't need to flash KK baseband.
7. Only when you are about to flashing new ROM..
Click to expand...
Click to collapse
Thank you very much for your detailed answers !! :good::good:

Root & then ROM choice

Hi Guys,
It's been while since I rooted my phone or did any serious mods on my phone ... was waiting for the warranty of my S4 to run out!
Now that, that's over can you guys guide me on the following ....
(PS. Am Using the S4 (Indian latest August INU stock ROM from www.sammobile.com/firmwares/1/?model=GT-I9500&pcode=INU#firmware
a) Which is the best and safest Root method for the i9500? I once used the CF-Root method here but then went back to stock as there were no serious work on custom ROMS back then.
b) Once rooted, can you'll guide me to a couple of custom ROMS to start with .... once I've gone through a few suggested ROMS I guess I'll be confident enough to explore the ocean .... remember it's I9500
c) I've heard (rather read on and of) about "Xposed". Would prefer if the ROM incorporates this and then a guide to where I can find the various bits a pieces of Xposed.
Looking forward to your assistance as I hope to go live with my new look phone from the 1st of October
Thanks & Cheers

123 views and no comment???
Can someone atleast tell me if I can use the CF-root method and if that is the safest way to go about rooting?
Thanks

http://forum.xda-developers.com/sitesearch.php?q=root i9500
a. Sure its safe.
B. Just try it out for yourself
C. There is an entire section on xda dedicated to xposed. You can find everything you want there.

Out of the game for a while advice welcome

The last time i flashed a rom was about 6 months ago and the last time i had to get my hands dirty in a root and recovery process was even longer, probably as much as 2 years back with my old S2.
With this in mind i was hoping for a little guidance on a couple of things.
1) I'm not too concerned with triggering knox that i heard could be a problem in the early days for the note 3 as it's nearly 2 years old but I'd prefer not to, what is the best way and the best order to root, flash recovery and then flash a rom?
2)i know there isn't much love for people asking what is the best rom but what i would like to have is a stable rom even if it isn't the most recent and i do like touchwiz. However i do like the idea of extra features and tweaks. So, are there roms around that meet these requirements?
Cheers guys.

There are ROMs.. but Xposed is still not stable for Lollipop Samsung phones...
I'm not a fan of Touchwiz either but Lollipop Touchwiz is awesome (coming from a CM Fan)
Also ROMs like AryaMod are promising

cheers mate.
any other advice for the rooting and recovery processes from anyone?

You are not out for long enough to forget stuffs Welcome back anyway.
Rooting can't be more easy. Just flash any custom recovery (TWRP/ Philz), and flash the SuperSU zip package which can be found in Chainfire's website from it, https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Done, you are rooted.
And for stable ROMs, well some are out there, but my favourite is AryaMod. It is based on stock TW ROM and comes with lots of customisations. If you are looking for purely stock based ROMs then just download those cooked ROMs by Alexandar (pardon if the spelling is wrong), they are as close to stock as you will get. And I don't like S6 based ROMs, I have a Note 3 and I want it as a Note 3, but there are few out there which will give you some S6 features. But the ones I mentioned are purely Note 3 based, you won't find any other phones' feature in them

marc.knuckle said:
...1) I'm not too concerned with triggering knox that i heard could be a problem in the early days for the note 3 as it's nearly 2 years old but I'd prefer not to, what is the best way and the best order to root, flash recovery and then flash a rom?
2)i know there isn't much love for people asking what is the best rom but what i would like to have is a stable rom even if it isn't the most recent and i do like touchwiz. However i do like the idea of extra features and tweaks. So, are there roms around that meet these requirements?
Cheers guys.
Click to expand...
Click to collapse
1. I triggered Knox ages back so haven't kept up on things but if you flash a custom recovery, AFAIK you WILL trigger it. There are ways to flash custom ROMs etc without triggering Knox but I think you have to flash a pre-rooted ROM. Do some reading around - I've seen a number of threads about it.
2. I am currently on Temasek's CM12.1 ROM and have been for some time. I occasionally try others but have always come back to his - it's everything I like. Even on stock though, I run Nova launcher. For a stock-based ROM I'd recommend Sparx's Alliance ROM - I used it for months and it is easily the most configurable ROM I have seen - you don't need Xposed or other app to mod things, it's all built in.

You'd be surprised how much i could forget haha
So, would it be - 1) root (which method and how?) 2) flash recovery (which one and how?) 3) if I'm to use arya rom it says I'd need a stock lollipop installed first so would i do this before the root and recovery (again which one and how?)
Thanks guys for advice and patience.

devilsdouble said:
You are not out for long enough to forget stuffs Welcome back anyway.
Rooting can't be more easy. Just flash any custom recovery (TWRP/ Philz), and flash the SuperSU zip package which can be found in Chainfire's website from it, https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Done, you are rooted.
And for stable ROMs, well some are out there, but my favourite is AryaMod. It is based on stock TW ROM and comes with lots of customisations. If you are looking for purely stock based ROMs then just download those cooked ROMs by Alexandar (pardon if the spelling is wrong), they are as close to stock as you will get. And I don't like S6 based ROMs, I have a Note 3 and I want it as a Note 3, but there are few out there which will give you some S6 features. But the ones I mentioned are purely Note 3 based, you won't find any other phones' feature in them
Click to expand...
Click to collapse
hi and thanks for the referral to Arya. i see it mentions having to come from an existing stock lollipop. could you take a look at my post just before this one and see if you can guide me a little as i dont want to brick my note 3 by doing something either wrong or in the wrong order. thanks for your help.

marc.knuckle said:
You'd be surprised how much i could forget haha
So, would it be - 1) root (which method and how?) 2) flash recovery (which one and how?) 3) if I'm to use arya rom it says I'd need a stock lollipop installed first so would i do this before the root and recovery (again which one and how?)
Thanks guys for advice and patience.
Click to expand...
Click to collapse
1,2- Root: Simple as I said before. Just head over to Development section and find TWRP recovery. Flash that via Odin. Then go to Chainfire's website, to download the SuperSU zip package, 2.46 I believe is the latest version. Have that zip package copied to your internal or external memory, enter Recovery (I am sure you remember Vol Up + Power button combo will help you to enter recovery) and flash that SuperSU zip file. Just reboot the phone and you are now rooted.
3- Yes, you will be needing to flash a stock Lollipop ROM to be able to use Arya. I am not sure but I think its because of the bootloader. If you want to flash a stock ROM, just head over to sammobile.com and download any Lollipop ROM you want and flash it via Odin. Then download Arya ROM, it will be a zip package, and install that from TWRP, just like you would flash that SuperSU zip for rooting.

devilsdouble said:
1,2- Root: Simple as I said before. Just head over to Development section and find TWRP recovery. Flash that via Odin. Then go to Chainfire's website, to download the SuperSU zip package, 2.46 I believe is the latest version. Have that zip package copied to your internal or external memory, enter Recovery (I am sure you remember Vol Up + Power button combo will help you to enter recovery) and flash that SuperSU zip file. Just reboot the phone and you are now rooted.
3- Yes, you will be needing to flash a stock Lollipop ROM to be able to use Arya. I am not sure but I think its because of the bootloader. If you want to flash a stock ROM, just head over to sammobile.com and download any Lollipop ROM you want and flash it via Odin. Then download Arya ROM, it will be a zip package, and install that from TWRP, just like you would flash that SuperSU zip for rooting.
Click to expand...
Click to collapse
Cheers mate, i think I'm nearly there. Flashing the stock lollipop will wipe out root won't it? Do is it best to first flash the stock lollipop, then flash twrp then root then arya?
Lastly, when i looked on sammobile there were many different regions of it. I'm in the uk on an unlocked international model which i believe is btu. I know btu hasn't had it yet so which one is best? I know I'll be flashing arya over it but would like it to be the right one as i might try it out for a few days before flashing arya.

marc.knuckle said:
Cheers mate, i think I'm nearly there. Flashing the stock lollipop will wipe out root won't it? Do is it best to first flash the stock lollipop, then flash twrp then root then arya?
Lastly, when i looked on sammobile there were many different regions of it. I'm in the uk on an unlocked international model which i believe is btu. I know btu hasn't had it yet so which one is best? I know I'll be flashing arya over it but would like it to be the right one as i might try it out for a few days before flashing arya.
Click to expand...
Click to collapse
Yep, you got it right, you should flash the stock Lollipop ROM first, then flash TWRP, then root the phone (SuperSU zip package from recovery) and then flash AryaMod. That way you won't have to repeat any steps, cause flashing any stock ROM will restore stock recovery anyway, but I am sure you've already figured that.
About the ROMs on sammobile.com, well I can't really say which one you should download. I once downloaded a German or UK ROM (can't recall really) and it wouldn't flash on my UAE Note 3, someone told me that mine is 32 gigs phone and that ROM was meant for 16 gigs phone, since then I really didn't put much thought about those ROMs anyway, and obviously I had found Arya by then. You can ask in on the UK only topic in general section, they should be able to help you. The ROM from sammobile which worked for my phone was Polish Lollipop ROM, but again, it worked on my phone, so you get the point.

New around here. Some doubts.

Hello.
Ever since I bought a Galaxy Nexus and found XDA, my life changed. Without noticing I got infected a virus: addiction to Android.
My Nexus got outdated quickly and now is pretty done and I need a new toy. 3,5 years later I finally got some spare money to buy a new phone. Since here in Portugal the minimum wage is around 500€ and top flagship phones cost around 700€ (and there's no affordable contract to get something cheaper and still nice), I had to wait until now to get a used Note 3 for 300€.
I love the phone's design and above all the specs. There's no other phone with 3GB RAM and Snap 800 for this price and I always liked big sized phones.
Well, I write too much unnecessary info... I need to stop
Let's get down to the point. I will get the phone tomorrow!!
TL;DR
How do I check the bootloader version? I want to flash TWRP right away and maybe install a Note4/5 port or something stock Android, do I need to be careful with the bootloader?
I know from other phones (i.e LG G2) that any custom rom uses KK bootloader and the stock roms use their respective version bootloader. Is this also true for the Note?
Also, which version of TWRP should I flash? Does it depend on the stock rom version that I have?
Checking if the device has 2.3x GB of available RAM, if Odin and Recovery have their stock aspect and if the S-Pen works is enough to ensure that the Note I'm getting is truly original?
Well, that's all. I'm sorry if I'm asking the same questions everyone does. I'm used to Nexus so I'm afraid of bricking the Note with dumb moves. That's why I am taking my time to read every important thread and asking here some doubts that went into my mind while doing the required reading. I have no warranty (no box nor invoice) so I can't afford to mess up with the new babe
Cheers!

This app!
diogofd8 said:
Hello.
Ever since I bought a Galaxy Nexus and found XDA, my life changed. Without noticing I got infected a virus: addiction to Android.
My Nexus got outdated quickly and now is pretty done and I need a new toy. 3,5 years later I finally got some spare money to buy a new phone. Since here in Portugal the minimum wage is around 500€ and top flagship phones cost around 700€ (and there's no affordable contract to get something cheaper and still nice), I had to wait until now to get a used Note 3 for 300€.
I love the phone's design and above all the specs. There's no other phone with 3GB RAM and Snap 800 for this price and I always liked big sized phones.
Well, I write too much unnecessary info... I need to stop
Let's get down to the point. I will get the phone tomorrow!!
TL;DR
How do I check the bootloader version? I want to flash TWRP right away and maybe install a Note4/5 port or something stock Android, do I need to be careful with the bootloader?
I know from other phones (i.e LG G2) that any custom rom uses KK bootloader and the stock roms use their respective version bootloader. Is this also true for the Note?
Also, which version of TWRP should I flash? Does it depend on the stock rom version that I have?
Checking if the device has 2.3x GB of available RAM, if Odin and Recovery have their stock aspect and if the S-Pen works is enough to ensure that the Note I'm getting is truly original?
Well, that's all. I'm sorry if I'm asking the same questions everyone does. I'm used to Nexus so I'm afraid of bricking the Note with dumb moves. That's why I am taking my time to read every important thread and asking here some doubts that went into my mind while doing the required reading. I have no warranty (no box nor invoice) so I can't afford to mess up with the new babe
Cheers!
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
this app will help you confirm your phone.
then you can proceed flashing twrp and supersu, things are so easy for N9005
and Welcome Aboard

Install phone info samsung from playstore. It could tell a lot about your phone.
To make it easy as long as the phone is running with android version 4.4.2 and above you should use twrp 4.4. If 4.3 use the right one for 4.3.
Sent from my SM-G925F

White Note3 do you have? There are several versions made by Samsung.
Regardless of the bootloader on the phone, I recommend using the latest TWRP as the latest TWRP can be used to flash all ROMs and zip files. Find your device from here: https://twrp.me/Devices/
Before moving to custom ROMs, I also recommend installing the latest bootlloader and ROM.
Not sure if your phone still has warranty but if it does, I would not change the ROM or root because doing either may trip the knox counter and void the warranty.

nijom said:
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo&hl=en
this app will help you confirm your phone.
then you can proceed flashing twrp and supersu, things are so easy for N9005
and Welcome Aboard
Click to expand...
Click to collapse
Thanks! I will keep the link in my favorites and install the app when I get the chance to test things.
Rosli59564 said:
Install phone info samsung from playstore. It could tell a lot about your phone.
To make it easy as long as the phone is running with android version 4.4.2 and above you should use twrp 4.4. If 4.3 use the right one for 4.3.
Sent from my SM-G925F
Click to expand...
Click to collapse
Thanks! I'm pretty sure it has 4.4.x or lollipop. Should I update to any of those versions (just in case it comes with 4.3) first and then install TWRP?
audit13 said:
White Note3 do you have? There are several versions made by Samsung.
Regardless of the bootloader on the phone, I recommend using the latest TWRP as the latest TWRP can be used to flash all ROMs and zip files. Find your device from here: https://twrp.me/Devices/
Before moving to custom ROMs, I also recommend installing the latest bootlloader and ROM.
Not sure if your phone still has warranty but if it does, I would not change the ROM or root because doing either may trip the knox counter and void the warranty.
Click to expand...
Click to collapse
The phone doesn't come with box nor invoice so I don't have any warranty xd
What is the number or version of the latest bootloader?

What is the model # of the phone? There is the n-900t, n9005, n-900w8, etc.

N9005, it's the european unlocked version

The model # is important when asking questions because the AT&T version of the note 3 has a locked bootloader so it's more complicated to flash custom recovery and to get root.
If you want to run custom ROMs, I recommend upgrading to the latest modem and bootloader, install a custom recovery, back up your stock ROM, and try some custom ROMs to see which one you like.
Look for the tar version of TWRP for your phone from here: https://twrp.me/Devices/
You can flash TWRP with Odin.

audit13 said:
The model # is important when asking questions because the AT&T version of the note 3 has a locked bootloader so it's more complicated to flash custom recovery and to get root.
If you want to run custom ROMs, I recommend upgrading to the latest modem and bootloader, install a custom recovery, back up your stock ROM, and try some custom ROMs to see which one you like.
Look for the tar version of TWRP for your phone from here: https://twrp.me/Devices/
You can flash TWRP with Odin.
Click to expand...
Click to collapse
I'll get the phone tomorrow!!!!!
So, by upgrading to the latest official rom avaiable I'll have the most recent modem and bootloader, right?
Do I need to follow the order you mentioned: modem->bootloader->recovery->backup->croms or can I flash TWRP, backup every partition, flash most recent modem and bootloader (not sure if I can flash a bootloader) and then install croms?

No, only flashing a newer custom ROM won't update your Bootloader and Modem. You will need to flash those files separately via Odin. Then you can flash the custom ROM you want. The order is simple. Get a custom recovery first, TWRP. Then update your Modem and Bootloader. Then wipe the device from TWRP (full wipe, take backup beforehand if you need) and flash the custom ROM of your choice.

Safest way to upgrade the modem and bootloader is via ota update on a completely stock unrooted rom with stock recovery. After the phone is running the latest rom, then start with customization.

audit13 said:
Safest way to upgrade the modem and bootloader is via ota update on a completely stock unrooted rom with stock recovery. After the phone is running the latest rom, then start with customization.
Click to expand...
Click to collapse
I have the phone and managed to update it to 5.0 -> n9005xxugboa1
Is it the latest version or should I update it to another one?

BOD2 appears to be the latest according to sammobile.com: http://www.sammobile.com/firmwares/database/SM-N9005/

audit13 said:
BOD2 appears to be the latest according to sammobile.com: http://www.sammobile.com/firmwares/database/SM-N9005/
Click to expand...
Click to collapse
I'm from Portugal but the phone is unlocked (no carrier) and they only have firmware for carrier notes... Which one should I download and flash?
Also... with a G2 I flashed a .kdz file (official rom) and ended up with a bricked phone (later fixed via warranty), but I have no warranty in this phone, how can I make sure that the file is safe?

Just check for software updates from your phone.

audit13 said:
Just check for software updates from your phone.
Click to expand...
Click to collapse
It says the phone is already at the latest version. I've cleaned framework services and checked again but got the same result.

Try removing the SIM card and moving the date ahead by two days, then try again.

audit13 said:
Try removing the SIM card and moving the date ahead by two days, then try again.
Click to expand...
Click to collapse
Done that, no update avaiable. Connected to Kies3, no update avaiable.
Is it really in a old version? It's 5.0. Do I really need the latest version to start flashing a recovery?
Also, can I use the recovery without flashing it? I want to check if it works nicely before flashing if it is possible. TWRP can be used to flash any rom right? I'm interested in trying darklord first.

Yes, you can flash recovery without updating. I suggested updating because the update probably deals with the stage fright bug.

Questions about installing custom rom and need rom suggestions.

Hey guys i want to install a custom rom for my t00j-d. I searched about unlocking bootloader and things like that but i couldnt find something useful. First off all i have latest stock rom (lolipop) and its not rooted so do i have to root my device first then unlock bootloader then flash rom? And which rom is good at the moment? My priorities are battery life > performance > visual.
thanks for reading and answers

Lambritsche said:
Hey guys i want to install a custom rom for my t00j-d. I searched about unlocking bootloader and things like that but i couldnt find something useful. First off all i have latest stock rom (lolipop) and its not rooted so do i have to root my device first then unlock bootloader then flash rom? And which rom is good at the moment? My priorities are battery life > performance > visual.
thanks for reading and answers
Click to expand...
Click to collapse
you can root zenfone without unlocking bootloader and if you wont flash rom backup your imei using terminal and then system using twrp or another recovery

Lambritsche said:
Hey guys i want to install a custom rom for my t00j-d. I searched about unlocking bootloader and things like that but i couldnt find something useful. First off all i have latest stock rom (lolipop) and its not rooted so do i have to root my device first then unlock bootloader then flash rom? And which rom is good at the moment? My priorities are battery life > performance > visual.
thanks for reading and answers
Click to expand...
Click to collapse
here, http://forum.xda-developers.com/zenfone-5/general/zenfone-6-custom-t3341140

rom and phone swap
zerodeus94 said:
here, http://forum.xda-developers.com/zenfone-5/general/zenfone-6-custom-t3341140
Click to expand...
Click to collapse
i have been looking around and can not find any info on what i want to do. so i am just going to ask and see if anyone can help. hope ive come to the right place.
about a year ago i purchased a blu studio 6.0 hd(d651u). it came stock with kk(4.2.2 i believe. can confirm if needed.) i pulled the stock firmware using droid tool. so i do have the original rom and scatter file. the lollipop update was available so i updated. afterwards i ran the updated rom through SuperRs rom kitchen, rooted, de-odexed, debloated... afterwards when i was theming the apks and was almost satisfied, i dropped the phone and it broke.. so i purchased another one. same make same model(d651u). only thing i see any different is that this new one came stock with the same lollipop rom that my old phone had updated to. so my question is this. can i use the stock rom and scatter file that i got from my original device to restore the device i have now in case anything goes wrong. im trying to find out if i can safely skip the whole rom pull step and jump right into getting my custom rom onto my NEW phone. i know i can use my old rom, i just wonder if i would be able to restore a brick with my original rom pull because they are the same device, just manufactured at different times. any feed back would be GREATLY appreciated. thank you

ANDjROID said:
i have been looking around and can not find any info on what i want to do. so i am just going to ask and see if anyone can help. hope ive come to the right place.
about a year ago i purchased a blu studio 6.0 hd(d651u). it came stock with kk(4.2.2 i believe. can confirm if needed.) i pulled the stock firmware using droid tool. so i do have the original rom and scatter file. the lollipop update was available so i updated. afterwards i ran the updated rom through SuperRs rom kitchen, rooted, de-odexed, debloated... afterwards when i was theming the apks and was almost satisfied, i dropped the phone and it broke.. so i purchased another one. same make same model(d651u). only thing i see any different is that this new one came stock with the same lollipop rom that my old phone had updated to. so my question is this. can i use the stock rom and scatter file that i got from my original device to restore the device i have now in case anything goes wrong. im trying to find out if i can safely skip the whole rom pull step and jump right into getting my custom rom onto my NEW phone. i know i can use my old rom, i just wonder if i would be able to restore a brick with my original rom pull because they are the same device, just manufactured at different times. any feed back would be GREATLY appreciated. thank you
Click to expand...
Click to collapse
no, you should not use the backup from another phone to restore your new one. and you should post in the section for blu studioinstead of here, the info you get here might be inaccurate