Database Users

connectivity issue

hello
i have a problem with my g928f
my issue is that it can not be regognized by the windows
i have tried at my desktop with win 10 and at my laptop with windows 7 and at both says unknown device,
i have tried everything i know of
unistall everything from the pc regarding samsung drivers
install it again , nothing
install smart switch , nothing
install kies, nothing
run odin , not even see the phone at download mode
made factory reset from recovery , nothing
charge is working just fine both from pc and my wall charger
i tried mhl hdmi and nothing happened
tried just now otg cable with a usb drive , again nothing
just a week ago i was using it just fine with my pc
should i take it to a store to check my micro usb port??

noone??
today i replaced the screen with a new one witch had a new usb dock on it and the problem is still here
i can not connect it to any pc.
i cann't flash the stock rom because odin is not see it also

is it possible to be a rom problem????
i can't flash the stock one because of the usb issue
but i think i can download another lollipop rom to give it a try.

Have you made sure that it is set as MTP?
Setting - Storage - USB.

Check if the device gets connected in Fastboot mode. If it doesn't then it would be your USB.

sideload is not working either
usb is brand new and original.

is there a way to flash stock rom via recovery?

[HELP] USB-MTP no longer working on S4 i9505 but ODIN 3.09 works fine

Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me

loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
Try disabling and enabling USB debugging while the phone is connected.

GDReaper said:
Try disabling and enabling USB debugging while the phone is connected.
Click to expand...
Click to collapse
Thanks for your reply, i've tried this many times, even when typing "adb devices", adb can't find my phone and it doesn't appaer in windows Device manager

loche37 said:
Hi guys !
I'm having a strange issue with my S4 i9505. It was running lollipop 5.0.1 Imperium Rom V5.0 (XXUHOD7) and it stopped prompting for MTP-USB notification in notification panel. When i connect the phone, it says me it is charging. I'm using windows 8.1 pro x64 + Genuine Samsung USB cable (which came with the phone) between my S4 and the PC.
Then i tried dialing *#0808# in phone app and choose MTP+ADB in USB connection option when the phone was connected to the computer. Nothing happened even if i tried other USB modes (like MTP, Rndis, PTP...). USB internet sharing didn't work either. Changing USB cables and USB ports on the pc didn't change anything either
So i did a factory reset under Philz CWM recovery and flashed an updated version of Imperium Rom v14.0.
USB-MTP was still not working even with *#0808# trick.
So i decided to install Samsung drivers and try a complete stock flash with XXUHOF2 Firmware from Sammobile.com with ODIN v3.09. When the phone was into Download Mode, I connected it via USB and it showed up on ODIN with no problem and then I flashed XXUHOF2 Stock firmware with no errors and no problems at all. The phone rebooted normally and the PASS message appeard in ODIN after ~10 mins.
But the problem still remains, even if flashing a full up to date stock rom with Modem/BL/System + factory reset. The phone still doesn't show into windows as MTP device even with *#0808#.
So i'm wondering if my USB connector is faulty ? Is it possible to be able to flash through ODIN with no problem and not being able to have MTP USB connection ?
I think ODIN flashes phones using Data +/- pins on the USB connector just as MTP do, so they might be good on my S4. May i be wrong ? Is it possible there is an electronic chip behind USB connector of my phone which is misbehaving preventing MTP to work but allowing ODIN to work ?
Do you guys have an explanation of this and do you think replacing USB connector of my S4 would solve the problem ?
I hope my explanations are good and you can help me
Click to expand...
Click to collapse
I have the exact same probleme... Odin work but no mtp....Have you found a solution ?

Can I flash without root from SD? USB port fried

Hello, today my S7 Edge suddenly stopped fast charging. I noticed because the screen went on and changed to Cable Charging and 7 hours left to full charge! I tested with different cables, different adaptative fast chargers, noting. Standard wireless charging works as usual. I connected to my Mac, nothing, to a PC, nothign. My OTG USB doesnt work either. Never in contact with water, never dropped, the only thing I flashed STOCK german firmware from sammobile since day 1.
I have read that this is a thing, i will contact my provider. My question is, is there any way to flash Stock Firmware from SD Card using Stock Recovery? I can´t think of another way to flashing since the USB port is partly gone. Thanks in advance

boot to recovery then it should have flash option then go to sdcard directory and done!
http://lifehacker.com/how-to-flash-a-rom-to-your-android-phone-30885281
:good:

thanks for your answer. is it possible to use a ZIP file from stock firmware downloaded from sammobile? i mean if its contents are appropiate for this kind of flashing

Looking for OTA stock update.zip for N910F

Hi All
I am looking for an update.zip file I can use to flash the stock 6.0.1 rom again over my existing version to fix a USB connection issue. I need a Samsung OTA update.zip which can be flashed from the stock recovery via an sd card.
This has come to light as I've recently tried to update my note 4 to nougat but came across an issue where the phone will not connect with my PC via USB. I have tried all the usual tricks on the phone (dev options, usb debugging, MTP+ADB etc) but nothing was working. In the end I have replaced the micro usb daughter board on the phone thinking there must be an issue with the data pins but the phone still refuses to connect but charges fine. Strangely the phone thinks it's connected fine but the PC says it is not getting a device descriptor response. I have checked drivers etc and also tried 3 other PCs all of which connect to my old S4 without issue. I have also tried various USB cables including a new genuine samsung one.
Due to not being able to connect to a PC in any mode (such as odin download mode or recovery) and having the stock recovery without root my only hope is that a new update.zip will sort out corruption from the last OTA update. I believe this may be the reason as I was able to connect fine until the most recent update a couple of weeks ago. I have tried using a zip from the samfirm downloader but the recovery failed immediately with 'unable to map file'
Any help you guys can give would be greatly appreciated as I really don't want to be stuck on Marshmallow now Samsung will no longer be updating the Note 4.

I have tried connecting in MTP mode, odin download and recovery mode with usb debug both on and off
Many Thanks
Luke

s10 plus usb is not working need help please!

hello everyone
i have an s10 plus exynos MID
i was on a modded rom and when i went back to stock i lost usb functionality my phone does not get detected by any pc
i changed cables and cleaned the slot it still did not work
i updated through ota reaching to FUCD
i reset the phone through recovery a dozen times and still did not work
i tried another pc and still the same while the phone is turned on and while its on download mode it does not get detected at all
the phone charges just fine
when i plug a usb type c hub in it hdmi works fine and ethernet slot works as well but it does not detect any usb stick at all in all the slots
i need your help to get the FUE3 OTA zip file if anyone has it because the MID version did not get that ota thus i am stuck on FUCD
please help me
thank you..

I think this is kernel issue.you will try change your custom rom