Related
Hi all!
Here is a little problem that i didn't solved.
i have a N910F Note 4 that likes to boot loop . I received it as it is and don't know what caused it(i suppose that was a rooting issue because had the knox value 1)
During the all time, PC and MAC were unable to recognize the Note 4, despite of repeatedly reinstalled drivers(older and newer versions) , Keys and Smart Switch were unable to recognize the device, PC is failing to install the MTP driver for some reason. I changed the USB ports,restarted,updated drivers,updated windows etc. -NO RESULT. BUT : Somehow Keys is able to run recovery and initialization and install it on the device while saying Connecting device... , phone also doesn't appear in device manager or file explorer as external drive.NOTHING! Odin and Jodin says ''added!'' and starts the job with no comments
1. I tried different versions of boot loaders with different versions of ROM (all for my specific model) with no result.
The end of the boot is when Samsung logo ,sound and graphic appears but freezes before actually starting OS, then restarts. IT keeps restarting until battery goes off(even while connected to pc by usb!!! ). Then starts to charge the battery normally.
It boots in recovery and download mode with no problems, it did every time i flashed it…
2. I tried different versions of boot loaders with stock roms , custom kernels etc...and the problem was the same
3. I tried to flash with Odin the stock 4.4.4 without problems but….the problem was the same
4.I tried Device recovery and initialization with Keys and here something interesting happened:
First time when i did it, it went over the samsung logo and booted. I selected language,i skipped wifi network selection and i accepted the user agreement. No matter how fast i was moving, the boot loop didn't went over the user name selection which is after the user agreement. Then freeze and boot again.
Second time when recovered with Keys (tried more stuff in the mean time) it went over the logo and started to update like…''updating applications 2of 17'' the max reach point was ''3 apps of 17'' and then freeze and reboot
I am out of ideas so i suspect that the battery might be dead because it gets empty even if is charging while phone is ''boot looping''. I ordered a battery,should arrive soon.
If that don't work…i am gonna spend some cash and sent it to Samsung for repairs (i bet that it won't be cheap because they will probably tell me that is the motherboard fried so they make you pay for being a bad boy and tried to root). Far as i know is not a brick as long as download mode and recovery works just fine.
Is here someone that has any new ideas for bringing this phone to life? Any help is well received , maybe i skipped something….
Thank you in advance.
Boot into recovery and perform a factory reset, it will wipe the internal storage.
Battlehero said:
Boot into recovery and perform a factory reset, it will wipe the internal storage.
Click to expand...
Click to collapse
That was the first thing i tried , cache wiped also. After every rom when booting failed.
UPPME said:
That was the first thing i tried , cache wiped also. After every rom when booting failed.
Click to expand...
Click to collapse
Uninstall Kies, and install Samsung USB drivers: https://www.androidfilehost.com/?fid=24052804347849220
Take the battery out, leave it for approximately 10 seconds, enter the battery back in.
Hold volume down key + Home key and power on the device.
Then plug the mobile phone into the computer.
Run Odin as Admin: https://www.androidfilehost.com/?fid=24052804347851815
Then flash the firmware in the AP section.
Make sure that the firmware is for your region, you can download it from Sammobile or SamFirm.
i have the same problem, but mine doesn't let the samsung logo finish when it shows the letter S on samsung logo it goes restart again no sound or anything, recovery is accesible, download mode is also accessible, i can flash official firmware and factory reset but nothing change, still stuck in bootloop no one here in xda knows how to fix it i think.. or they just never encounter something like this
i know how to fix an ordinary bootloops or soft bricked.. but this one is different.. i think there's something with note 4 that causes this..
kerbiii said:
i have the same problem, but mine doesn't let the samsung logo finish when it shows the letter S on samsung logo it goes restart again no sound or anything, recovery is accesible, download mode is also accessible, i can flash official firmware and factory reset but nothing change, still stuck in bootloop no one here in xda knows how to fix it i think.. or they just never encounter something like this
i know how to fix an ordinary bootloops or soft bricked.. but this one is different.. i think there's something with note 4 that causes this..
Click to expand...
Click to collapse
Yes, it doesn't go after the Samsung graphics , mine does sound. Goes to app updates only after Kies recovery but doesn't go more far than updating apps 3/17 for ex…crushes there and starts over….weird.
One time i managed to actually go to setup menu, choose country,wifi, device name, and there crushed and started over…. So i am thinking now that the battery might be wasted because i saw posts saying that after the 5.0.1 update many Note 4's went to boot loop and the battery change solved the problem. Now i have new battery coming by post.
Hi I had a similar problem but I do not know if that works but always worth a try
1. download recovery - "twrp-2.8.1.0-trltexx"(.tar) cant post link fresh in forum
2. flash recovery through Odin (AP) ( run as administrator)
3. unplug the cable
4. Reboot to Recovery (home+power+wolume up)
5. Then go to Wipe/Advanced Wipe/check the boxes - Dalvik Cache,System,Data,Cache and Swipe to Wipe
6. Reboot to Download Mode
7. Open Odin ( run as administrator) choise the rom to flash
8 Connect the phone
7. Flash Your Stock Rom
8. Reboot
always in Odin load the file first to flash and then connect the phone
sorry for my English
UPPME said:
Yes, it doesn't go after the Samsung graphics , mine does sound. Goes to app updates only after Kies recovery but doesn't go more far than updating apps 3/17 for ex…crushes there and starts over….weird.
One time i managed to actually go to setup menu, choose country,wifi, device name, and there crushed and started over…. So i am thinking now that the battery might be wasted because i saw posts saying that after the 5.0.1 update many Note 4's went to boot loop and the battery change solved the problem. Now i have new battery coming by post.
Click to expand...
Click to collapse
if you can stay in recovery mode and download mode for more than 10mins i think its not battery problem, i think i have corrupted system files, i left my note 4 to samsung service center a while ago i will get it tom, i just hope they wont charge me too much for it,
uldyzjan said:
Hi I had a similar problem but I do not know if that works but always worth a try
1. download recovery - "twrp-2.8.1.0-trltexx"(.tar) cant post link fresh in forum
2. flash recovery through Odin (AP) ( run as administrator)
3. unplug the cable
4. Reboot to Recovery (home+power+wolume up)
5. Then go to Wipe/Advanced Wipe/check the boxes - Dalvik Cache,System,Data,Cache and Swipe to Wipe
6. Reboot to Download Mode
7. Open Odin ( run as administrator) choise the rom to flash
8 Connect the phone
7. Flash Your Stock Rom
8. Reboot
always in Odin load the file first to flash and then connect the phone
sorry for my English
Click to expand...
Click to collapse
nah it doesnt work thats the first thing I do, that only work on ordinary bootloop
I was stuck in a boot loop the other day trying to flash a stock ROM to get rid of encryption. I tried all the stuff mentioned in this thread which is just standard procedure but I couldn't get past the samsung logo. What it turned out to be was that you need to go to stock recovery after flashing the stock ROM via odin and do a factory data reset then it will boot to the OS. It worked in my case, maybe you can give it a try.
guts100 said:
I was stuck in a boot loop the other day trying to flash a stock ROM to get rid of encryption. I tried all the stuff mentioned in this thread which is just standard procedure but I couldn't get past the samsung logo. What it turned out to be was that you need to go to stock recovery after flashing the stock ROM via odin and do a factory data reset then it will boot to the OS. It worked in my case, maybe you can give it a try.
Click to expand...
Click to collapse
if you read the above post you will know that we already wipe and factory reset,
btw since i was not able to fix it, it brought it to samsung service center and they also cant fix it so they are changing the motherboard, so far they are not charging me anything and just asking to bring my receipt of purchase so it will be under warranty
kerbiii said:
if you read the above post you will know that we already wipe and factory reset,
btw since i was not able to fix it, it brought it to samsung service center and they also cant fix it so they are changing the motherboard, so far they are not charging me anything and just asking to bring my receipt of purchase so it will be under warranty
Click to expand...
Click to collapse
I read the post; however, it did not appear as though you did a factory reset after flashing the stock ROM only before. At any rate at least you're getting a new mobo out of it and problem solved.
guts100 said:
I was stuck in a boot loop the other day trying to flash a stock ROM to get rid of encryption. I tried all the stuff mentioned in this thread which is just standard procedure but I couldn't get past the samsung logo. What it turned out to be was that you need to go to stock recovery after flashing the stock ROM via odin and do a factory data reset then it will boot to the OS. It worked in my case, maybe you can give it a try.
Click to expand...
Click to collapse
guts100 said:
I read the post; however, it did not appear as though you did a factory reset after flashing the stock ROM only before. At any rate at least you're getting a new mobo out of it and problem solved.
Click to expand...
Click to collapse
yes thats the good thing and its under warranty even though im already rooted, with knox 01 and custom binary haha, i was already expecting to pay a huge amount of money but they said they will cover it, so its a blessing, but i hope the OP fixed his problem.
Hi,
**Long Story**
I'm new here - I refrained from posting as I know a repeat post can p*** people off but I can't find my problem or fix it.
My own Sony was stolen a week ago - My brother in law kindly gave me his old S5 as a back up phone.
He has never had any problems with it EVER. I did a factory reset (from the settings menu) to clear his data and straight away I was in a boot loop (Handset vibrates, Samsung logo displays, blue LED, vibrates, handset switches off.. over and over again) the only way to stop this is to remove the battery. I cannot enter recovery mode but I CAN enter download mode. According to the settings the handset was running the latest version of lollipop.
I took the phone home anyway, thinking I could fix it - leaving the battery out in my pocket.
When I got home, I put the battery in and the phone turned on, unfortunately I forgot to put the sim card in - so I removed the battery, put in the sim card and... Boot Loop!
At this point I was really frustrated so I left the battery out and went to sleep. I woke up in the morning, put the battery in and it worked fine, all day, then all of a sudden the phone switched itself off and now I'm back in a boot loop and this time it isn't wanting to work again.
I have:
- Flashed with stock roms using Odin (5.0 & 4.4.2) - Yes, I used the correct firmware for my handset.
- Flashed with Kies to the latest firmware
- In desperation, tried the "Bash your power button against a hard, flat surface" trick
- Shouted at the handset
None of these have worked and every post I have found says to put the phone in recovery mode, I CANT. When I try, the blue "Recovery Booting" text is displayed, but just restarts anyway...
Weirdly and at random times, twice, the phone has powered on while plugged into my laptop, but the screen is blank, I get message sounds and the soft keys below the screen light up, but the screen is blank.
Any body have any idea?!?!! I'm vaguely techy, however not with this kind of thing. Any help would be much appreciated. What confuses me is there was no problem before I did the factory reset.
didscub said:
Hi,
**Long Story**
I'm new here - I refrained from posting as I know a repeat post can p*** people off but I can't find my problem or fix it.
My own Sony was stolen a week ago - My brother in law kindly gave me his old S5 as a back up phone.
He has never had any problems with it EVER. I did a factory reset (from the settings menu) to clear his data and straight away I was in a boot loop (Handset vibrates, Samsung logo displays, blue LED, vibrates, handset switches off.. over and over again) the only way to stop this is to remove the battery. I cannot enter recovery mode but I CAN enter download mode. According to the settings the handset was running the latest version of lollipop.
I took the phone home anyway, thinking I could fix it - leaving the battery out in my pocket.
When I got home, I put the battery in and the phone turned on, unfortunately I forgot to put the sim card in - so I removed the battery, put in the sim card and... Boot Loop!
At this point I was really frustrated so I left the battery out and went to sleep. I woke up in the morning, put the battery in and it worked fine, all day, then all of a sudden the phone switched itself off and now I'm back in a boot loop and this time it isn't wanting to work again.
I have:
- Flashed with stock roms using Odin (5.0 & 4.4.2) - Yes, I used the correct firmware for my handset.
- Flashed with Kies to the latest firmware
- In desperation, tried the "Bash your power button against a hard, flat surface" trick
- Shouted at the handset
None of these have worked and every post I have found says to put the phone in recovery mode, I CANT. When I try, the blue "Recovery Booting" text is displayed, but just restarts anyway...
Weirdly and at random times, twice, the phone has powered on while plugged into my laptop, but the screen is blank, I get message sounds and the soft keys below the screen light up, but the screen is blank.
Any body have any idea?!?!! I'm vaguely techy, however not with this kind of thing. Any help would be much appreciated. What confuses me is there was no problem before I did the factory reset.
Click to expand...
Click to collapse
Who is your service provider? Is the phone unlocked? Where did you get the stock firmware from?
Cryceratops said:
Who is your service provider? Is the phone unlocked? Where did you get the stock firmware from?
Click to expand...
Click to collapse
Thanks for the reply!
Service Provider - o2 UK
Stock from sanmmob
Phone is not unlocked
I did my best to try & get the firmware for my particular service provider but sammob and a few of the other sites use those awful restricted speed file sharing sites.
didscub said:
Thanks for the reply!
Service Provider - o2 UK
Stock from sanmmob
Phone is not unlocked
I did my best to try & get the firmware for my particular service provider but sammob and a few of the other sites use those awful restricted speed file sharing sites.
Click to expand...
Click to collapse
Did you try the one I linked to you or a different one?
Cryceratops said:
Did you try the one I linked to you or a different one?
Click to expand...
Click to collapse
Only just saw that - I didnt - thank you.
I will try now but may take a while to get back to you while I wait to download.
Try flashing the PIT file along with the stock ROM in ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract to .pit - add to PIT section in ODIN, add ROM to AP or PDA section, flash them both at the same time
*Detection* said:
Try flashing the PIT file along with the stock ROM in ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract to .pit - add to PIT section in ODIN, add ROM to AP or PDA section, flash them both at the same time
Click to expand...
Click to collapse
Thanks, did that, now the phone has started but it stuck at the first "Powered by Android" screen, not restarting but can't go any further and still cant get into recovery.
didscub said:
Thanks, did that, now the phone has started but it stuck at the first "Powered by Android" screen, not restarting but can't go any further and still cant get into recovery.
Click to expand...
Click to collapse
Try flashing just the ROM again, and then try booting into recovery, and factory reset
Or try flashing TWRP 2.8.7.0 with ODIN, and then boot into recovery and factory reset
Use this guide (Don't worry about the SuperSU part if you don't need root, and ignore the reactivation part as you can't boot the phone yet - start at No.3)
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Are you flashing the latest Lollipop ROM too?
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM
*Detection* said:
Try flashing just the ROM again, and then try booting into recovery, and factory reset
Or try flashing TWRP 2.8.7.0 with ODIN, and then boot into recovery and factory reset
Use this guide (Don't worry about the SuperSU part if you don't need root, and ignore the reactivation part as you can't boot the phone yet - start at No.3)
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Are you flashing the latest Lollipop ROM too?
https://mega.nz/#!fVhhzRBC!A79uC8Fgg1mGCZOaujQCzBxcUUN9z_ctVVkigD8ffVM
Click to expand...
Click to collapse
flashed TWRP 2.8.7.0 - Doesn't go into revovery:
Recovery is not SEANDROID ENFORCING
Set Warranty Bit : Recovery
I was flashing with G900FXXU1BOJ1_G900FOXA1BOJ1_G900FXXU1BOJ1_HOME.tar.md5
didscub said:
flashed TWRP 2.8.7.0 - Doesn't go into revovery:
Recovery is not SEANDROID ENFORCING
Set Warranty Bit : Recovery
I was flashing with G900FXXU1BOJ1_G900FOXA1BOJ1_G900FXXU1BOJ1_HOME.tar.md5
Click to expand...
Click to collapse
Did you follow the guide I linked?
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Pull the battery after flash, do not allow the phone to reboot first etc?
Because that error is usually associated with you allowing the phone to reboot Automatically after flashing TWRP
*Detection* said:
Did you follow the guide I linked?
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Pull the battery after flash, do not allow the phone to reboot first etc?
Because that error is usually associated with you allowing the phone to reboot Automatically after flashing TWRP
Click to expand...
Click to collapse
Pulled as soon as it said Pass.
This is so confusing, is the Stock firmware that you've linked to in Mega the same as the one I have downloaded?
Will retry with TWRP again. BRB
didscub said:
Pulled as soon as it said Pass.
This is so confusing, is the Stock firmware that you've linked to in Mega the same as the one I have downloaded?
Will retry with TWRP again. BRB
Click to expand...
Click to collapse
BOJ1 yea, same one
Try different versions of ODIN, 3.09 up to 3.10.7 (Maybe even 3.07)
*Detection* said:
Did you follow the guide I linked?
http://forum.xda-developers.com/showpost.php?p=64961009&postcount=2
Pull the battery after flash, do not allow the phone to reboot first etc?
Because that error is usually associated with you allowing the phone to reboot Automatically after flashing TWRP
Click to expand...
Click to collapse
Definitely didt let it reboot & pulled the battery. Tried it twice to make sure.
I am downloading the Stock firmware that you have linked and will try that, is there any reason why it started to reboot constantly after I factory reset? It can't be hardware because there was never a HW problem before I reset it. I don't suppose you want to pop down from Durham and fix it?! lol
didscub said:
Definitely didt let it reboot & pulled the battery. Tried it twice to make sure.
I am downloading the Stock firmware that you have linked and will try that, is there any reason why it started to reboot constantly after I factory reset? It can't be hardware because there was never a HW problem before I reset it. I don't suppose you want to pop down from Durham and fix it?! lol
Click to expand...
Click to collapse
To London? wanna pay the plane fare? lol
If you got that firmware from Sammobile, the one I linked you to is the same one, that's where I got it from, you could try some different droid versions, try a KitKat ROM too
Not sure why it would boot loop after you factory reset it, if reactivation lock was left on, you should still have managed to get to the welcome screen, but then be locked out of the phone until you entered his samsung account login
Sounds like something bugged out during the reset, and didn't reset properly, or corrupted one of the partitions, which the PIT file should have fixed
Stock recovery is cr4p though, I've ended up with a bootloop just clearing caches from it before, and had to flash TWRP to clear them properly, then flash stock on top again just to get it to boot
*Detection* said:
To London? wanna pay the plane fare? lol
If you got that firmware from Sammobile, the one I linked you to is the same one, that's where I got it from, you could try some different droid versions, try a KitKat ROM too
Not sure why it would boot loop after you factory reset it, if reactivation lock was left on, you should still have managed to get to the welcome screen, but then be locked out of the phone until you entered his samsung account login
Sounds like something bugged out during the reset, and didn't reset properly, or corrupted one of the partitions, which the PIT file should have fixed
Stock recovery is cr4p though, I've ended up with a bootloop just clearing caches from it before, and had to flash TWRP to clear them properly, then flash stock on top again just to get it to boot
Click to expand...
Click to collapse
OK - Sorry for the delay but unfortunately I had to do stuff - I would have happily sat and tried to fix it all day.
So, I did spend some time on it earlier and a few things happened.
I reinstalled different firmwares, and also tried TWRP 2.8.7.0 a few times with different versions of Odin but nothing would work.
I reinstalled the firmware BOJ1, nothing
Tried PIT again, nothing
Then, after trying PIT I got the Firmware error and connected to Kies... It worked, but now I just have a blank screen (another seemingly common issue with these paperweights) - Unsure what to do now, the phone is on, i can call it, find it with device manager but the screen is just blank. FML.
didscub said:
OK - Sorry for the delay but unfortunately I had to do stuff - I would have happily sat and tried to fix it all day.
So, I did spend some time on it earlier and a few things happened.
I reinstalled different firmwares, and also tried TWRP 2.8.7.0 a few times with different versions of Odin but nothing would work.
I reinstalled the firmware BOJ1, nothing
Tried PIT again, nothing
Then, after trying PIT I got the Firmware error and connected to Kies... It worked, but now I just have a blank screen (another seemingly common issue with these paperweights) - Unsure what to do now, the phone is on, i can call it, find it with device manager but the screen is just blank. FML.
Click to expand...
Click to collapse
OK, so they phone is working, there's just no display...
OK, try resetting the phone remotely from here first
https://www.google.com/android/devicemanager
If it's not connected to the network - try this
http://forums.androidcentral.com/sa...ory-reset-galaxy-s5-computer.html#post4365754
If that still fails, try flashing a stock KitKat ROM from Sammobile, see if downgrading the OS is a big enough change for it to overwrite whatever is causing the problem
Wondering if TWRP has flashed, but the no screen thing is stopping you from knowing one way or another - if we could get into TWRP, we'd have a lot more options, including custom ROMs
---------- Post added at 10:00 ---------- Previous post was at 09:44 ----------
Uploaded the latest KitKat ROM
Code:
https://mega.nz/#!eIQEAQ6a!ztOhVwFuI2MpD6OBhxC-TtgwUJQCxtwnfDQvFOl3g40
*Detection* said:
OK, so they phone is working, there's just no display...
OK, try resetting the phone remotely from here first
https://www.google.com/android/devicemanager
If it's not connected to the network - try this
http://forums.androidcentral.com/sa...ory-reset-galaxy-s5-computer.html#post4365754
If that still fails, try flashing a stock KitKat ROM from Sammobile, see if downgrading the OS is a big enough change for it to overwrite whatever is causing the problem
Wondering if TWRP has flashed, but the no screen thing is stopping you from knowing one way or another - if we could get into TWRP, we'd have a lot more options, including custom ROMs
---------- Post added at 10:00 ---------- Previous post was at 09:44 ----------
Uploaded the latest KitKat ROM
Code:
https://mega.nz/#!eIQEAQ6a!ztOhVwFuI2MpD6OBhxC-TtgwUJQCxtwnfDQvFOl3g40
Click to expand...
Click to collapse
Thanks,
I'll wait for that to download and try.
So - I used accessibility mode to get into settings and do a factory reset... It was difficult, I even thought that the Dark Screen setting might have mysteriously have been turned on but nope.
Rebooted and got the Bootloader screen with the Samsung logo and Recovery Booting text, after a few minutes the screen went blank and the phone vibrated and then nothing!!! :crying::crying::crying:
I have just put it into download mode (I only know this because the many hours I've spent doing this I noticed that the battery and device goes cool when its in download mode) and will try the KitKat flash once its downloaded - Thank you for that btw.
Its so strange - it cant be an issue with the actual screen because it *sometimes* displays the logo.. What can it be?? Its also odd that from when I originally reset it, it could'nt boot into recovery. I'm worried that everything I have done has screwed it up more? Can the Recovery/Bootloader be "Broken"? Its so confusing, I hate tech that doesn't behave.
didscub said:
Thanks,
I'll wait for that to download and try.
So - I used accessibility mode to get into settings and do a factory reset... It was difficult, I even thought that the Dark Screen setting might have mysteriously have been turned on but nope.
Rebooted and got the Bootloader screen with the Samsung logo and Recovery Booting text, after a few minutes the screen went blank and the phone vibrated and then nothing!!! :crying::crying::crying:
I have just put it into download mode (I only know this because the many hours I've spent doing this I noticed that the battery and device goes cool when its in download mode) and will try the KitKat flash once its downloaded - Thank you for that btw.
Its so strange - it cant be an issue with the actual screen because it *sometimes* displays the logo.. What can it be?? Its also odd that from when I originally reset it, it could'nt boot into recovery. I'm worried that everything I have done has screwed it up more? Can the Recovery/Bootloader be "Broken"? Its so confusing, I hate tech that doesn't behave.
Click to expand...
Click to collapse
Does sound like a possible hardware problem, but unlikely or a huge coincidence that it all started after resetting, so I'd be more inclined to think otherwise
Just remembered about this unbrick image / tutorial
http://forum.xda-developers.com/galaxy-s5/general/g900f-debrick-img-lollipop-t3240626
Might be worth giving that a shot
*Detection* said:
Does sound like a possible hardware problem, but unlikely or a huge coincidence that it all started after resetting, so I'd be more inclined to think otherwise
Just remembered about this unbrick image / tutorial
http://forum.xda-developers.com/galaxy-s5/general/g900f-debrick-img-lollipop-t3240626
Might be worth giving that a shot
Click to expand...
Click to collapse
OK - might be a massive chore rooting and installing busybox.. Worth a shot though. Can I not use it with Odin??
didscub said:
OK - might be a massive chore rooting and installing busybox.. Worth a shot though. Can I not use it with Odin??
Click to expand...
Click to collapse
You don't need busybox, that's for creating your own debrick image, the tutorial stops here:
Flash this Debrick file to your 16GB Micro SD card with Win32DiskImager
*Insert your Micro SD card into your computer (backup any information you may have on it we are going to ERASE, FORMAT it to ex FAT
*Open win32DiskImager
*Navigate to the location where you downloaded the correct Debrick file
*Select your Debrick file by double clicking on it
*In the upper right corner of Win32DiskImager you should make sure that the drive letter assigned to your sd card is selected.
***Which ever drive that is listed will be erased, formatted
*Click write in the bottom right hand side
put the Debrick SD card in the Phone, Pull and Replace the Battery
Plug phone in usb and boot into download mode
yout phone should boot into download mode then flash stock firmware via odin
Download link : https://drive.google.com/file/d/0ByA...ew?usp=sharing
You're saying you can't see anything on screen in download mode, just guessing it's there because it cools down - but that could also mean it's not in any mode
With this method, you might get a display to use, then you can flash normally with ODIN with download mode visible on screen
Hello i just bought new Galaxy Tab A 9.7 LTE SM-T555 , once i did rooted and it was working well , but currently it just hanged and i did hard restart with "Volume Down + Power button" it start well at first then after few minutes it just restarting continuous and freezes in Samsung Logo, i even try to flash ROM with KIES and even with ODIN (ROM downloaded from Samsung website), but non of them seems working, after successful completion of the Flashing when it comes to restart the TAB, it goes on same Previous stage , freezes in Samsung LOGo. i am trying for two days but could not figure out, Please anyone who has same problem and SOLVED , could you just help me to get rid of this Problem. It is killing me, i am spending hrs and hrs to figure but no success. I hope to get the any suggestion and help :crying: . Thank you in Advance.
pitho said:
Hello i just bought new Galaxy Tab A 9.7 LTE SM-T555 , once i did rooted and it was working well , but currently it just hanged and i did hard restart with "Volume Down + Power button" it start well at first then after few minutes it just restarting continuous and freezes in Samsung Logo, i even try to flash ROM with KIES and even with ODIN (ROM downloaded from Samsung website), but non of them seems working, after successful completion of the Flashing when it comes to restart the TAB, it goes on same Previous stage , freezes in Samsung LOGo. i am trying for two days but could not figure out, Please anyone who has same problem and SOLVED , could you just help me to get rid of this Problem. It is killing me, i am spending hrs and hrs to figure but no success. I hope to get the any suggestion and help :crying: . Thank you in Advance.
Click to expand...
Click to collapse
First or second Samsung logo?
Try factory reset in recovery.
ashyx said:
First or second Samsung logo?
Try factory reset in recovery.
Click to expand...
Click to collapse
Thank you. It is in second logo where it only shows "Samsung" i tried even in factory reset but could not help.
pitho said:
Thank you. It is in second logo where it only shows "Samsung" i tried even in factory reset but could not help.
Click to expand...
Click to collapse
Hang on second boot usually means a corrupt data partition or bad app.
After factory reset leave your tablet alone for 15mins. It should boot after that.
ashyx said:
Hang on second boot usually means a corrupt data partition or bad app.
After factory reset leave your tablet alone for 15mins. It should boot after that.
Click to expand...
Click to collapse
i reset in factory and leave it for couple of hrs but still same freezing in logo. I think now am slowly loosing hope :crying:
Go to recovery and factory reset again then immediately boot to Download mode and flash the correct firmware with odin.
Make sure there are no errors when flashing and it flashes successfully.
Reboot and wait at least 10mins.
ashyx said:
Go to recovery and factory reset again then immediately boot to Download mode and flash the correct firmware with odin.
Make sure there are no errors when flashing and it flashes successfully.
Reboot and wait at least 10mins.
Click to expand...
Click to collapse
I did even tried as you said, but still same problem, i feel now its completely permanently broken. Can we use other custom rom ?, is there any available for these model?. May be i can try with other unofficial ROM. and let see.
pitho said:
I did even tried as you said, but still same problem, i feel now its completely permanently broken. Can we use other custom rom ?, is there any available for these model?. May be i can try with other unofficial ROM. and let see.
Click to expand...
Click to collapse
It is not broken @pitho. I have been in this situation. The problem is occurring because Samsung is such a heavily modded rom, it takes a long time to load and just as @ashyx said, because of a bad app. Some apps are aimed for Vanilla Android, but the developer does not restrict the app only for Vanilla devices but makes it universal. So, in order to get out, download the correct firmware from Updato.com
Press on the OS Updates in the website and you type in the device's name and the current build and what kind of version you want. (Ex: If you have Marshmallow, and your device had Lollipop before, you could degrade your firmware)
Download Odin (Just search it up on Google and you should find a download link)
Plug in your device to the PC after it is in Download Mode (Volume Down + Power Button + Home Button)
On Odin, it should say Device added!
Press AP slot and find the firmware (.tar.md5 or just .tar) you downloaded from Updato.com and select it.
Press Start on the bottom of the application and it should start. It takes about 2 minutes or longer to finish flashing.
There! You just restored your device! It will take a few minutes for the device to boot up and should be installing any additional files that were included in the Official Firmware.
Happy Flashing with ODIN!
Hi, I don't have enough posts to ask this in the actual DirtySanta thread.
I meticulously followed the steps in the DirtySanta thread making sure I had all the correct software, all the pre-requisites, all files in my ADB folder (except SuperSU zip, which is on the SD card on the phone). Suffice it to say that I did all the steps exactly as written in the guide. I was prompted when to run the next batch files each time, etc. Entered the proper commands in the terminal utility, and so on. Everything as written.
After clicking on step3.bat, the phone immediately rebooted to a Fastboot screen. In the meantime, the batch files disappeared off my desktop.
So, for the past 15 minutes or so the phone has been sitting on Fastboot and vibrating away.
Here's what I see in the small Fastboot screen:
Fastboot Mode (in red)
stuff like Product_name, Variant, HW_Version, etc. up until it says LOCK_STATE.
Ok, after all of that basic stuff, it says:
[1090]
[1140] Fastboot mode started
[1670] fastboot: processing commands
[17600] usb_read() transaction failed; txn_status= -1
[17650] usb_read: DONE: ERROR len=64
[1700] fastboot: oops!
[17750] fastboot: processing commands
And that's where it sits, doing seemingly nothing and vibrating away.
Can anyone assist?
Try a different usb port. then rerun step 3.
me2151 said:
Try a different usb port. then rerun step 3.
Click to expand...
Click to collapse
Will do...was just thinking of doing that since it said "usb read error". Will report back.
Heyitsrick said:
Will do...was just thinking of doing that since it said "usb read error". Will report back.
Click to expand...
Click to collapse
First off, a big thanks for helping me.
Update: OK, changing the USB port worked I re-ran Step3.bat. I have made it through getting to TWRP, and have done these steps:
Verizon(VS995) and ATT(H910):
4.1) Flash SuperSU.zip
4.2) Go back to Main-menu > Wipe > [Format Data] > Type ?Yes?
4.3) Go back to Wipe > Advanced > Check Dalvik, Data and Cache > Slide to wipe
4.4) Go back to Main-menu > Reboot > System
So, with that all complete, it's rebooted to a Verizon screen (horizontal progress dots) and a low buzzing.
I did try what you mentioned in the guide to get over the wait time by pulling the battery, reinserting with vol down key pressed and re-attaching the USB to flash boot2.img via fastboot, but it didn't get back to fastboot after the battery/voldown/usb. It went back to the same Verizon screen after the obligatory "Corrupt" screen came on.
Can I assume that I can wait this out for 20 minutes, or did I miss something in how to interrupt this waiting period for first setup? I do want to (and know I have to) flash boot2.img.
EDIT: wasn't holding vol key down long enough to get into fastboot. Doh. Just flashed boot2.img and rebooted.
Looks like I made it! It's at the "Prepare your Phone Screen". Fingers crossed.
Heyitsrick said:
Looks like I made it! It's at the "Prepare your Phone Screen". Fingers crossed.
Click to expand...
Click to collapse
Are you still stuck?
I ran into this EXACT same issue on my brand new Verizon v20 on step 3 (both 13a and 12a firmware gave me this issue) and I had to figure out my own solution, even tho I read that 'dirty santa root' thread a thousand times front to back.... (no disrepsect to the OP/Devs of that thread btw!)
Anyways, below, is the link to my solution on my brand new Verizon v20, in case you're still stuck. I've actually reflashed (via LGUP) back to stock a couple times, then re-root/unlock to test out 13a and 12a firmwares to benchmark various battery life/performance markers for a tech site I write for. Ultimately, I have to go through the exact same steps everytime for my Verizon v20.
I know I wasn't too specific in my post below... but if you have any questions, don't hesitate to ask
https://forum.xda-developers.com/showpost.php?p=71371141&postcount=24
NegativeX said:
Are you still stuck?
I ran into this EXACT same issue on my brand new Verizon v20 on step 3 (both 13a and 12a firmware gave me this issue) and I had to figure out my own solution, even tho I read that 'dirty santa root' thread a thousand times front to back.... (no disrepsect to the OP/Devs of that thread btw!)
Anyways, below, is the link to my solution on my brand new Verizon v20, in case you're still stuck. I've actually reflashed (via LGUP) back to stock a couple times, then re-root/unlock to test out 13a and 12a firmwares to benchmark various battery life/performance markers for a tech site I write for. Ultimately, I have to go through the exact same steps everytime for my Verizon v20.
I know I wasn't too specific in my post below... but if you have any questions, don't hesitate to ask
https://forum.xda-developers.com/showpost.php?p=71371141&postcount=24
Click to expand...
Click to collapse
I read your "fix" post to see exactly where you got stuck, as I got stuck first due to the USB port not being able to work correctly and had to switch USB ports on my pc before I could re-run step3.bat.
I see now that you're talking about the long Verizon logo screen with progress dots issue after rebooting post-running step3.bat that I ran into, as well.
OK, what worked for me was much easier in the end than what you did. After step3.bat and the reboot, it would just sit there on the Verizon logo with the progress dots, as you know. There is a notation on the first page of the DirtySanta thread that in order to get around this, unplug the USB cable and remove the battery.
This is the actual note from the DirtySanta thread for Verizon users with the long Logo screen issue:
*****VERIZON USERS******
It has come to my attention that some users have encountered abnormally long first boot time(over 20 minutes before first time setup)
To resolve this issue:
Boot into bootloader by pulling the battery and reinserting it and holding VOL- and phugging in the phone. then typing:
Code:
fastboot flash boot boot2.img
fastboot reboot
**************
Click to expand...
Click to collapse
Once I removed the battery and usb cable, the phone was completely off, of course. Then, I just needed to get it back into "fastboot" on the phone, itself, in order to flash boot2.img via ADB on the PC. When the phone was on the never-ending Logo screen with progress dots, I found that ADB could see the phone ok via the adb devices command, but if I tried to flash anything at that point, it would just say something like "pending", as if it were waiting for the device to be free to flash. So, that wasn't going to work, obviously. I needed the phone to be in the flashboot screen, not the logo screen. I did a ctrl-c to cancel out of the adb flash command, and then set out to pull the battery/usb cable and then reconnect the battery, and while holding the Vol Down button reinserting the USB cable.
The first time I tried this, it booted up fine, but it went right back to the Logo screen. Doh! I figured perhaps I wasn't waiting long enough with the Volume Down button so I tried it again. What happened the first time when it rebooted to the Logo screen is I released the Volume Down button the moment the phone started to turn on (you feel the vibration). That's when it booted back to the Logo. This second time, I removed the battery again while it was on that never-ending Logo screen to power it off and disconnected the USB cable again. I put the battery back in, then with the Volume Down button pressed down, I reconnected the USB cable. The difference this time is that I did not release the Volume Down button this time UNTIL I saw it was in the Fastboot screen and not the Verizon Logo.
So, at this point the phone was on the Fastboot screen and I saw it was it was ready to go, so I initiated the ADB command to flash boot2.img. It went through its paces and once it got back to the ADB command prompt, I did an ADB Fastboot Reboot command. It rebooted, first with the obligatory corrupt warning, then the Verizon Logo and progress dots, but then after a short while I got the "Hello" screen in red and I knew it was actually going to finish. Whew! Relief! At that point I was eventually at the phone's setup screen for a new user, and I finished setting up the phone, reinstalling apps, etc.
One caveat in this: I don't know why, but even though I had gone through all the steps in "4" section of the instructions, when I checked Root, I wasn't rooted! Huh?
In other words, I had already gone through this part:
Verizon(VS995) and ATT(H910):
4.1) Flash SuperSU.zip
4.2) Go back to Main-menu > Wipe > [Format Data] > Type ?Yes?
4.3) Go back to Wipe > Advanced > Check Dalvik, Data and Cache > Slide to wipe
4.4) Go back to Main-menu > Reboot > System
Click to expand...
Click to collapse
After setting up the phone and reinstalling my apps, I opened up the SuperSU app, and it said there was no executable installed. In other words, it didn't recognize that I had flashed it in step 4.1. Perhaps flashing boot2.img overwrote that? Not sure, but at this point, I set about to figure out how to boot into TWRP Recovery on the phone (not fastboot) to flash it from there (again).
It took me a while to find the instructions on how to boot into TWRP, lol, and it's a little unnerving that before it boots to TWRPyou are warned that all your data is going to be overwritten before you can boot to it, but it did get me back into TWRP. Once in TWRP, I re-flashed Supersu-blahblah.zip and rebooted via the system reboot. (did not wipe any caches again, though).
After reboot, I checked root again, and this time after a bit SuperSu brought up the permissions screen for the Root app that I had to allow, and it brought back a successful Root message.
I then set about to do what I really wanted to do with root - bypass the Verizon entitlement check for hotspot usage, and got that working fine.
All in all, I have to say this was the diciest rooting I've ever had to go through. I guess that's because of Nougat and that there can't be (at least not yet) a "one-click" root. But man, was I worried when I was at the point where I first posted in this thread. I bought this phone as a "new-resale" (never used) phone from Swappa.com for $450, so if I bricked it, I was out of luck. But it seems to be ok now.
Heyitsrick said:
I read your "fix" post to see exactly where you got stuck, as I got stuck first due to the USB port not being able to work correctly and had to switch USB ports on my pc before I could re-run step3.bat.
I see now that you're talking about the long Verizon logo screen with progress dots issue after rebooting post-running step3.bat that I ran into, as well.
OK, what worked for me was much easier in the end than what you did. After step3.bat and the reboot, it would just sit there on the Verizon logo with the progress dots, as you know. There is a notation on the first page of the DirtySanta thread that in order to get around this, unplug the USB cable and remove the battery.
This is the actual note from the DirtySanta thread for Verizon users with the long Logo screen issue:
Once I removed the battery and usb cable, the phone was completely off, of course. Then, I just needed to get it back into "fastboot" on the phone, itself, in order to flash boot2.img via ADB on the PC. When the phone was on the never-ending Logo screen with progress dots, I found that ADB could see the phone ok via the adb devices command, but if I tried to flash anything at that point, it would just say something like "pending", as if it were waiting for the device to be free to flash. So, that wasn't going to work, obviously. I needed the phone to be in the flashboot screen, not the logo screen. I did a ctrl-c to cancel out of the adb flash command, and then set out to pull the battery/usb cable and then reconnect the battery, and while holding the Vol Down button reinserting the USB cable.
Click to expand...
Click to collapse
I saw that 'fix' and it never worked for me at the point in the rooting process I was in... sadly. You have to be able to even get to TWRP, do the SU install then format/wipe, then you can flash the boot2.img to speed up the booting process. In my case, I was never able to even get to TWRP. Trying to flash boot2.img before being able to get to TWRP, would soft brick my phone with the 'password' screen on bootup and I was never able to get around it, requiring me to LGUP back to stock and try again. Luckily I was able to still figure it out.
As you said, definitely the 'diceist' rooting process I've ever encountered... and I've been rooting phones since the original Motorola Droid 1/Milestone phone. Good times tho! Haha
NegativeX said:
I saw that 'fix' and it never worked for me at the point in the rooting process I was in... sadly. You have to be able to even get to TWRP, do the SU install then format/wipe, then you can flash the boot2.img to speed up the booting process. In my case, I was never able to even get to TWRP. Trying to flash boot2.img before being able to get to TWRP, would soft brick my phone with the 'password' screen on bootup and I was never able to get around it, requiring me to LGUP back to stock and try again. Luckily I was able to still figure it out.
As you said, definitely the 'diceist' rooting process I've ever encountered... and I've been rooting phones since the original Motorola Droid 1/Milestone phone. Good times tho! Haha
Click to expand...
Click to collapse
Late response - sorry.
There must be something we each did differently, as we both have the same phones, same carrier, same software revision (13a). I was able to get to TWRP via the button method on the phone. Didn't use ADB for that. I was presented with an ominous white screen about all files will be wiped/deleted, but when accepting that (and hoping for the best, lol), it just went to TWRP. So, again...something or some step(s) must be done differently to get to that point on your end from what I did.
I'm guessing you're through with doing the flashing on this thing, so this is all moot now.
Hey guys i actually was having the same issues as you were now however after the SU install the wipe etc i reboot to TWRP no matter what i do even when i restart through bootloader or take the battery off it keeps booting to the same place instead to the verizon wizard help please
kratos380 said:
Hey guys i actually was having the same issues as you were now however after the SU install the wipe etc i reboot to TWRP no matter what i do even when i restart through bootloader or take the battery off it keeps booting to the same place instead to the verizon wizard help please
Click to expand...
Click to collapse
Called a twrp loop. Easy fix. Been posted a lot. Look around for it
me2151 said:
Called a twrp loop. Easy fix. Been posted a lot. Look around for it
Click to expand...
Click to collapse
I have been looking for 2 days haha literally have like 30 tabs open shifting through i dont know what to do next, i backed up wiped my cache data etc installed SU which had no problems wiped again/ rebooted system and back to twrp, i read that you might need to flash a system.img but i dont know where to find one, would appreciate the help kind sir
kratos380 said:
I have been looking for 2 days haha literally have like 30 tabs open shifting through i dont know what to do next, i backed up wiped my cache data etc installed SU which had no problems wiped again/ rebooted system and back to twrp, i read that you might need to flash a system.img but i dont know where to find one, would appreciate the help kind sir
Click to expand...
Click to collapse
Look at team digitals ROM thread. Stockish one. Look at post 3. If you still can't find it I'll quote it directly later. I'm busy right now
me2151 said:
Look at team digitals ROM thread. Stockish one. Look at post 3. If you still can't find it I'll quote it directly later. I'm busy right now
Click to expand...
Click to collapse
Couldnt find it sorry im new to this forum please link it when you are free thanks again for the help much appreciated
kratos380 said:
Couldnt find it sorry im new to this forum please link it when you are free thanks again for the help much appreciated
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=70393155&postcount=3
Sorry for the constant posts but i followed the steps on that thread, deleted the misc/fota files and it stopped it going to twrp and booted to the lg logo with the black screen, i waited there for about 2-3 hours to no avail rebooted into bootloader tried the fastboot img 2 and the same thing happened it was just stuck at the lg logo now when it boots to the fastboot screen however adb doesnt recognize the device anymore but fastboot does. Is it time to kdz and start over ?
My HTC U Ultra suddenly froze past nigth, then it rebooted... and never came back, it won't go past the HTC logo over and over. I am not able to enter in recovery mode either, the only thing I can do is, by pressing both volume buttons and power, entering in what seems to be fastboot menu. In that state I can send the phone fastboot commands (no adb commands though) but If i try to wipe it it says "unable to do in s-on" or similar. I was pretty happy with this phone, and spent a few bucks in a new battery not two months ago.... anything I can do?
Thanks.
PS: I failed to state that the phone is stock, not unlocked or rooted.
If it has just happened out of the blue and you haven't been doing anything with your phone, have you tried a simple reset? (Press and hold volume down and power button until your phone vibrates - Usually about 20 seconds for me)
If not, and you are struggling to get into recovery etc, see if you can follow the method in the thread linked below if you are currently on stock rom!?
(Not sure if this would delete all your data or not, so perhaps only use as a last resort....)
https://forum.xda-developers.com/u-ultra/help/howto-unbrick-ultra-t3891033
spikey001 said:
If it has just happened out of the blue and you haven't been doing anything with your phone, have you tried a simple reset? (Press and hold volume down and power button until your phone vibrates - Usually about 20 seconds for me)
If not, and you are struggling to get into recovery etc, see if you can follow the method in the thread linked below if you are currently on stock rom!?
(Not sure if this would delete all your data or not, so perhaps only use as a last resort....)
https://forum.xda-developers.com/u-ultra/help/howto-unbrick-ultra-t3891033
Click to expand...
Click to collapse
Reset doesn't work, and the other procedure didn't work either.
If I leave it plugged to the charger, it will fall into an endless reboot loop. Sometimes (few) it will end up booting, but If i try to do something with the phone it doesn't respond and reboots again.
Thanks.
As you can send fastboot commands, can you flash a recovery.img (i.e. TWRP), and then wipe cache and dalvik/art to see if that helps, but if not, flash corresponding rom to that which you already have?
spikey001 said:
As you can send fastboot commands, can you flash a recovery.img (i.e. TWRP), and then wipe cache and dalvik/art to see if that helps, but if not, flash corresponding rom to that which you already have?
Click to expand...
Click to collapse
I tried that, too, but didn't work. If I do a fastboot devices it detects the phone, but if I do a fastboot getvar all it doesn't give me any information, it doesn't admit adb commands, when I try to flash a rom or a recovery, it fails, I suspect it needs to have the USB debugging enabled, but I can't enable it in this state.
As I said before, if I leave it plugged to the charger, It will randomly end up booting (it can happen in the third loop or in the 50th), but it will freeze or reboot again in few seconds.
Ah I see, if you haven't got USB debugging enabled then I am unsure how to help sorry. Have you got your media backed up, or stored on micro sd? If so, might have to bite the bullet and do a factory reset. Sorry I couldn't be of any help. Maybe someone else would be able to help you further?
spikey001 said:
Ah I see, if you haven't got USB debugging enabled then I am unsure how to help sorry. Have you got your media backed up, or stored on micro sd? If so, might have to bite the bullet and do a factory reset. Sorry I couldn't be of any help. Maybe someone else would be able to help you further?
Click to expand...
Click to collapse
The data is not a problem, every important file has been backed up.
Regarding factory reset, since the device won't go to recovery, I can't see how can I do it.
-- Edit --
I noticed that when the phone is cold, those few times it boots, it lasts a little bit more (a matter of seconds) until it freezes again, so I tried to leave it in the freezer for a few minutes, and tried to boot it, and had enough time to do a factory reset. The factory reset worked, because now, when it boots, it goes straight to the intial setup, but keeps hanging after a few seconds. I suspect that the internal memory was somehow damaged, I don't think there is much left to do...
Is it possible to skip setup in order to get to settings and enable USB debugging so you can install a recovery?
If you can, then it might be an idea to try performing a repair of all the partitions and install a fresh ROM... Just to ensure it isn't a hardware issue!!
spikey001 said:
Is it possible to skip setup in order to get to settings and enable USB debugging so you can install a recovery?
If you can, then it might be an idea to try performing a repair of all the partitions and install a fresh ROM... Just to ensure it isn't a hardware issue!!
Click to expand...
Click to collapse
I can't see how to skip initial setup... and I don't have time enough to go through it, the phone will hang in 30 seconds or less. At this point, I really needed a working phone, so I bite the bullet and bought a new one... I will deal with the old one later, or I might sell it for parts.
Thanks everybody for the help.
No worries, enjoy your new phone