Hello everyone!!
I was hoping to have some guidance and/or advices as far as MTK2502C development goes, most acurately the KingWear KW18 Smartwatch.
Let me explain,
Looking for a better and more updated firmware I flashed the official one from this page:
http://www.king-wear.com/download (KW18_UI2_B_V1_20161128) the "B" options seams to be multilingual in most of the official firmware sites I found, and this is supposed to be the manufacturators official website of my watch, however, when I turn on the watch after flashing, I'm having some display issues, seems that the display is not lined up and I have a white/colorful (Like TV noise) at the bottom of the display where the soft action/virtual buttoms should be. And the touch screen seems to be misaligned too, since to select an option I have to select the one is right below to actually trigger the option I desire. The rest seems to work fine, Bluetooth, Pedometer, Heart Rate, etc, all of that is working fince.
Does anyone know what cause this? Is it a hardware issue? Is it something I can configure on the scatter file?
I also tried to flash the No 1 G3 latest firmware, since I saw G3 and KW18 have pretty much the same specs and the G3 have a much nicer overall ROM visuals and UI, but when I turn on the watch after the flashing, the display doesn't turn on or responds, but if a click the On/Off hardware button on the side, the watch actually makes a bip sound, telling me that the watch actually works, the G3 firmware went through and I'm supposedly turning on and off the screen but it's just that the display doesn't light up, no image, no light not even super deemed, anything, just unresponsive black screen.
Any idea of what could be happening? Is the KW18 not compatible with the No 1 G3 firmware? I honestly do not know.
I made a back up before flashing anything and after each flashing error I have to go back to the stock KW18. It's ok, but I'd like to have a nicer User Interface. The official site shows "supposedly" real pictures of the product and the firmware showed ther looks upgrated to the one I have. Still trying to update through the Mediatek Smart Device or the FundoWear App shows that I'm running the "latest firmware". I and recall watching a video on Youtube where a guy was making a Review of a Smartwatch pretty similar to the KW18 and the watchface showed up the weather and the virtual action buttons where blue and not orange. Watch faces also look more useful and cooler.
I finally got tired of googling for a Official/Custom Rom for the KingWear KW18. The only MTK2502C development I've seen so far is for the IWO watch which has a squared display. I don't think it could work on the KW18 round display, but I don't know for sure.
If anyone have a Custom firmware or a more recent update for the KW18, or point me in the right direction to where to get it, would be espectacular and deeply apprecieated it.
Thanks for your attention. I hope someone could help.
http://www.king-wear.com/download
KW18_LK_V1_B_1710161831 is suitable update or it is for differebónt hardware version?
ReNo05eront said:
Hello everyone!!
I was hoping to have some guidance and/or advices as far as MTK2502C development goes, most acurately the KingWear KW18 Smartwatch.
Let me explain,
Looking for a better and more updated firmware I flashed the official one from this page:
http://www.king-wear.com/download (KW18_UI2_B_V1_20161128) the "B" options seams to be multilingual in most of the official firmware sites I found, and this is supposed to be the manufacturators official website of my watch, however, when I turn on the watch after flashing, I'm having some display issues, seems that the display is not lined up and I have a white/colorful (Like TV noise) at the bottom of the display where the soft action/virtual buttoms should be. And the touch screen seems to be misaligned too, since to select an option I have to select the one is right below to actually trigger the option I desire. The rest seems to work fine, Bluetooth, Pedometer, Heart Rate, etc, all of that is working fince.
Does anyone know what cause this? Is it a hardware issue? Is it something I can configure on the scatter file?
I also tried to flash the No 1 G3 latest firmware, since I saw G3 and KW18 have pretty much the same specs and the G3 have a much nicer overall ROM visuals and UI, but when I turn on the watch after the flashing, the display doesn't turn on or responds, but if a click the On/Off hardware button on the side, the watch actually makes a bip sound, telling me that the watch actually works, the G3 firmware went through and I'm supposedly turning on and off the screen but it's just that the display doesn't light up, no image, no light not even super deemed, anything, just unresponsive black screen.
Any idea of what could be happening? Is the KW18 not compatible with the No 1 G3 firmware? I honestly do not know.
I made a back up before flashing anything and after each flashing error I have to go back to the stock KW18. It's ok, but I'd like to have a nicer User Interface. The official site shows "supposedly" real pictures of the product and the firmware showed ther looks upgrated to the one I have. Still trying to update through the Mediatek Smart Device or the FundoWear App shows that I'm running the "latest firmware". I and recall watching a video on Youtube where a guy was making a Review of a Smartwatch pretty similar to the KW18 and the watchface showed up the weather and the virtual action buttons where blue and not orange. Watch faces also look more useful and cooler.
I finally got tired of googling for a Official/Custom Rom for the KingWear KW18. The only MTK2502C development I've seen so far is for the IWO watch which has a squared display. I don't think it could work on the KW18 round display, but I don't know for sure.
If anyone have a Custom firmware or a more recent update for the KW18, or point me in the right direction to where to get it, would be espectacular and deeply apprecieated it.
Thanks for your attention. I hope someone could help.
Click to expand...
Click to collapse
How do you made your smartwatch backup? and what steps did you follow to upgrade the KW18?
kisger13 said:
http://www.king-wear.com/download
KW18_LK_V1_B_1710161831 is suitable update or it is for differebónt hardware version?
Click to expand...
Click to collapse
None of them worked for me. There were misplaced UI issues in the three.
Syoenth said:
How do you made your smartwatch backup? and what steps did you follow to upgrade the KW18?
Click to expand...
Click to collapse
I used the Universal ReadBack Extractor from Golem_
Original post:
https://forum.xda-developers.com/sm.../readback-extractor-mtk6260-firmware-t3289272
I made a backup from the original firmware, (the one that came pre-installed), and install it back when none of the original firmware versions from KingsWear worked for me. All of them gave me screen misplaced UI issues. I googled a bit more and discovered that the K18 I had was some sort of prototype and that's why I had a lot of issues with the official firmwares from KingsWear. :\
It doesn't matter anymore. The is one of the most common problems when buying this type of chinese devices. If you pay more for other devices, you're ensuring everything will work as expected 99.99% of the time.
To fix my problem let's say I didn't keep the KW18 and I bought a First class smart watch with a cute Apple Logo on the back.
If you have the money and believe on the recommendations and user rating, then go for a more expensive, better-designed device.
Works better than a charm.
Firmware KW18
You placed that you had backed up the Clock before updating it, exactly the same happened to me with my KW18, but the problem I have that does not support the Firmware and I could not recover it. You would be so kind as to send me the original firmware to my email [email protected] I would be eternally grateful. From already thank you very much.
Firmware Original KW18
Syoenth said:
How do you made your smartwatch backup? and what steps did you follow to upgrade the KW18?
Click to expand...
Click to collapse
You placed that you had backed up the Clock before updating it, exactly the same happened to me with my KW18, but the problem I have that does not support the Firmware and I could not recover it. You would be so kind as to send me the original firmware to my email [email protected] I would be eternally grateful. From already thank you very much.
pbastidas said:
You placed that you had backed up the Clock before updating it, exactly the same happened to me with my KW18, but the problem I have that does not support the Firmware and I could not recover it. You would be so kind as to send me the original firmware to my email [email protected] I would be eternally grateful. From already thank you very much.
Click to expand...
Click to collapse
Can you upload a Fullflash Backup please?
I can try to edit
Thanks
Related
This IK8 Watch Phone looks a lot like a ZGPAX or EC-309, but the camera points across the band instead of from the front and I think it has a faster processor.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I haven't seen any other mention of it here on XDA.
Does anyone know if it is a rebrand of something else that I'm missing here?
It's fast. I've been able to use Google Hangouts on it, even with video. Zello works with no problems and even sounds good. I'm going to get a SIM for it and see how well the phone works.
Biggest drawbacks are lack of support for Google Voice and Voice Search. I've been able to workaround most of the other issues. This appears to be a common issue for this type of phone, and it's a big disappointment here. I'd love to find a way to get those messages. Has anyone solved this?
I got mine at http://www.geekbuying.com/item/IK8-...4-0-512MB-RAM-4G-ROM-5MP-GPS-WIFI-325392.html but you'll likely find a place that ships more quickly than Geekbuying.
Thanks!
DC
Thanks for the small review! Runkeeper or other runner's app work on it?
dcrisis said:
This IK8 Watch Phone looks a lot like a ZGPAX or EC-309, but the camera points across the band instead of from the front and I think it has a faster processor.
I haven't seen any other mention of it here on XDA.
Does anyone know if it is a rebrand of something else that I'm missing here?
It's fast. I've been able to use Google Hangouts on it, even with video. Zello works with no problems and even sounds good. I'm going to get a SIM for it and see how well the phone works.
Biggest drawbacks are lack of support for Google Voice and Voice Search. I've been able to workaround most of the other issues. This appears to be a common issue for this type of phone, and it's a big disappointment here. I'd love to find a way to get those messages. Has anyone solved this?
I got mine at http://www.geekbuying.com/item/IK8-...4-0-512MB-RAM-4G-ROM-5MP-GPS-WIFI-325392.html but you'll likely find a place that ships more quickly than Geekbuying.
Thanks!
DC
Click to expand...
Click to collapse
I own a ZGPAX s5 and I see this watch on ebay as well.
For the processor they are the same :MTK6577 1GHz Dual Core
Both IK8 and s5 actually run the same system as well (android 4.0.4)
They look different just because of different default launchers.
I just root mine and use Launcher 8 instead.
The real difference should be the position of the camera.
Both camera are 2MP and 5MP interpolated.
s5 is better for selfies and Skype while IK8 is better for taking photo shots.
Both are 2G as well.
They even share the same battery!!! ZGPAX s5 got 500mAH and 700mAH and IK8 should be 700mAH
You can take a look of this
http://www.ikwear.com/wangzhanjianshe/1.html
It should be a rebrand product.
The best solution is to mix the two products' camera into one LOL
Then I can selfie and take normal shot!!! :laugh:
Cheers!
---------- Post added at 09:36 AM ---------- Previous post was at 09:30 AM ----------
dcrisis said:
This IK8 Watch Phone looks a lot like a ZGPAX or EC-309, but the camera points across the band instead of from the front and I think it has a faster processor.
I haven't seen any other mention of it here on XDA.
Does anyone know if it is a rebrand of something else that I'm missing here?
It's fast. I've been able to use Google Hangouts on it, even with video. Zello works with no problems and even sounds good. I'm going to get a SIM for it and see how well the phone works.
Biggest drawbacks are lack of support for Google Voice and Voice Search. I've been able to workaround most of the other issues. This appears to be a common issue for this type of phone, and it's a big disappointment here. I'd love to find a way to get those messages. Has anyone solved this?
I got mine at http://www.geekbuying.com/item/IK8-...4-0-512MB-RAM-4G-ROM-5MP-GPS-WIFI-325392.html but you'll likely find a place that ships more quickly than Geekbuying.
Thanks!
DC
Click to expand...
Click to collapse
For the Google Now, Just refer to the last two pages in [GUIDE] ZGPAX SmartWatch::1/22::Embedded more Videos/ OP
http://forum.xda-developers.com/showpost.php?p=51806814&postcount=764
dcrisis said:
This IK8 Watch Phone looks a lot like a ZGPAX or EC-309, but the camera points across the band instead of from the front and I think it has a faster processor.
I haven't seen any other mention of it here on XDA.
Does anyone know if it is a rebrand of something else that I'm missing here?
It's fast. I've been able to use Google Hangouts on it, even with video. Zello works with no problems and even sounds good. I'm going to get a SIM for it and see how well the phone works.
Biggest drawbacks are lack of support for Google Voice and Voice Search. I've been able to workaround most of the other issues. This appears to be a common issue for this type of phone, and it's a big disappointment here. I'd love to find a way to get those messages. Has anyone solved this?
I got mine at http://www.geekbuying.com/item/IK8-...4-0-512MB-RAM-4G-ROM-5MP-GPS-WIFI-325392.html but you'll likely find a place that ships more quickly than Geekbuying.
Thanks!
DC
Click to expand...
Click to collapse
Got a couple of quick questions if you don't mind. I find some interest in this smartwatch
1 How do you like this smartwatch now?
2 I noticed on a youtube video that this smartwatch seems to have a sort of hidden menu button and back button located at the bottom of display. Am I correct?
Any thing else you would like to comment on would be appreciated.
Thanks
sny11 said:
Got a couple of quick questions if you don't mind. I find some interest in this smartwatch
1 How do you like this smartwatch now?
2 I noticed on a youtube video that this smartwatch seems to have a sort of hidden menu button and back button located at the bottom of display. Am I correct?
Any thing else you would like to comment on would be appreciated.
Thanks
Click to expand...
Click to collapse
1. It is stand-alone watch phone, android v4.04 system, high definition touch screen, high resolution camera, you can use it smoothly and freely like a smartphone.
2. There is menu button and back button on the side of the watch, not at the bottom of display. And you can touch the screen to get what you want...
See more @ watchphonechina.com/watch-phone-china/
Zwatch said:
2. There is menu button and back button on the side of the watch, not at the bottom of display. And you can touch the screen to get what you want...
Click to expand...
Click to collapse
I've been using the IK8 for a few days now, and I discovered that there is definitely a menu- and back-button located directly underneath the display. In fact, they often get in the way while trying to touch lower areas of the screen .
Is this $120 the same one on AliExpress?
it gives notifications when connected to a phone?
It says 700mah battery. .. many days use do you get from it?
I got mine from Aliexpress It's super fast for me just two days to arrive to Hong Kong! I ordered another one earlier before from Chinavasion to Scotland and it takes me four days.
Sent from my PadFone using XDA Premium HD app
IK8
simple1i said:
Is this $120 the same one on aliexpress.com/item/IK8-Smart-Watch-Phone-154-Inch-Screen-MTK6577-Dual-Core-50MP-Front-Camera-OGS/1851182462.html ?
it gives notifications when connected to a phone?
It says 700mah battery. .. many days use do you get from it?
Click to expand...
Click to collapse
Looks like the same device to me. Just be cautious since this seller has only received feedback once. I'm not sure if this deal is legit, especially since the price is incredibly low. The IK8 usually sells for about $135 - $145.
Since it's a standalone Android device, you don't need any additional phone running a companion app in order to receive notifications. Just insert your SIM card (regular SIM) and you're ready to go. If you'd like to pair the IK8 to your smartphone and receive notifications over Bluetooth, maybe it is possible to install the Osmart app which is originally developed for the Omate Truesmart. I'm not sure if this will work, but it's worth giving it a try. XDA user 'KOAO' already had some success using this app with his ZGPAX S5, which is not that different from the IK8;
KOAO said:
I am successfully able to receive notifications from Emails, and texts. i haven't tried to reject a call yet. However, i used the Osmart Companion app from the omate truesmart. You download the companion app to you watch by loading the Ostore app on your watch(i might ....might link the APK file i extracted from the Truesmart OS)Then you go to the post at the bottom, join the group and then download the master app to your Andriod based smartphone. Then you pair them up and test. If successful, WIN if not then try again.
Osmart Master app:
plus.google.com/109641424466258907138/posts/8PrkrDdUsR4
Click to expand...
Click to collapse
The original battery supplied with the IK8 is 500mAh in contrary to what is promised on most websites/shops, it's exactly the same type of battery as used in the ZGPAX S5, but I'm not sure if they are interchangeable since the plastic 'mounting clips' look a bit different. With WiFi, Bluetooth and GPS turned off and the screen set at the lowest brightness I get about 7 - 8 hours of battery life. But I haven't been using the device a lot yet, so I think battery life will probably increase.
I ordered my IK8 from Aurabuy and received it within 1,5 week (to the Netherlands with SingPost).
Edit: I came across several 'relabeled' versions of this watch lately. They are all exactly the same, but simply indicate different brand-names. For as far as I know, the IK8 Smartwatch is originally known as the TCW-006 and is being manufactured by Tecomax Electronics. This also explains the build-number visible in Android; TECO_V2.0_20140420.
haven't posted in xda for a while..let alone in the smartwatch section...but here we go. was in hong kong for a conference and decided to drop by the it shop. came across a host of smartwatches and just for fun picked up the ik8 for $90. haggled it down to $80 and figured i'd ditch it sooner or later. didn't play around with it until like 5 days later after i got back to melbourne. lo and behold, was actually quite surprised and impressed with it. my 2 cents worth:
display/interface
- not bad, quite responsive though i replaced the screen protector with a matte (anti-glare) one
- the small keyboard takes some getting used to but once you've used it you'll get around the limitations. i still make the occassional mistake but that's only when i'm using playstore
hardware
- camera is quite good though i have no plans of using it as i have my note 2
- speaker is surprisingly loud for such a small device
- one con i have is the lack of a 3.5mm jack. the built-in micro usb (for data transfer and charging) is also the plug for the earphones which comes with the watch. thus you can't really plug your own set of earphones...unless of course you use bluetooth
- quite light, watch strap is quite sturdy
- took in my 32gb microsd with no problem. pretty easy and straightforward in mounting the card
- same with the sim, but no plans on using the phone function
- don't think its "water proof" as some smart watches that claim to be (e.g. omate). but i'm not complaining.
internals
- i installed adw launcher which spiced up the homescreen (better than the default launcher). no hangs or whatever
- installed a bunch of widgets, just have to be careful as some are obviously built for larger screens. example, clokr (time widget) tends to not fit due to the length
- installed button savior to avoid using the hardware buttons. no need for root as i only need home, back and power off
- mx player works well, can actually watch a movie on it. no plans though as i have my note 2
- not planning on using this for music but poweramp works well on it. though there is sometimes a tendency for some icon labels to overlap given the small screen
gps
- i had to put a separate review on gps as i'm quite impressed with it
- installed navigon, apk had no problems loading. through wifi, the additional data and maps were installed
- also installed gps tester as well as other apps for cycling
verdict: gps signal takes around 1-2 minutes to get a good fix. the watch is able to lock on 4 satellites. accuracy is quite good but tends to be a little off when it's cloudy. the gps is not as spiffy as the one in my note but i'm not complaining. for a device this small, i was quite impressed how good the gps works
- strapped on the watch on my bike, used bikemate app. speed was quite accurate as well as keeping it locked on the satellites. didn't lose a signal as i cycled away
- had no issues with navigon. plotted home and the watch took me back to my house with no problems
haven't really tried out the full extent of the battery but without using wifi and gps, i was able to use it for 3 days before having the charge. with gps, battery went down to like 50% after riding for an hour or so. not bad in my opinion. overall, quite happy with it and i've now removed the speedo on my bike. no more wires and no more replacing batteries. this watch has now taken over the speed indicator duties for my cycling.
cheers
I got me one of these too, ordered from a Dutch guy who'd better pay back the import taxes caused by him drop-shipping it while pretending he had it in stock, or he'll be getting some negative publicity. Having to wait 3 weeks was bad enough.
I already had a ZGPAX S5 which I damaged, which is why I got this as a replacement. This is almost exactly the same hardware, as evidenced by the ability to restore a complete TWRP backup from the IK8 on my S5 with everything functional except the cell phone system. The IK8 is definitely the better of these two watch phones though: better build quality, no buzzing during calls, better cell signal reception, better clock & launcher system, no dead zone on the touchscreen. Definitely not waterproof with the gaping hole of the microUSB port, but it looks not as vulnerable to a few raindrops as the S5, whose screen doesn't even seem to be glued tight.
For the rest I concur with Robson, very good loudspeaker, the GPS is indeed impressively good and seems better than on the S5, at the condition that one does the usual dance of enabling EPO etc.
Can't login to Google PlayStore
The problem is that the teeny tiny keyboard is just too hard to navigate and when I try to switch the keyboard from alpha to numeric I get an "Android Framework has stopped" error message and the Google setup/sign-in app crashes and reloads.. Arrrggghh..
I tried installing two different Bluetooth keyboards to get around this problem but when you link the keyboards and go into the settings it will say "Use as input device" great, but when you go into "Languages and Input" to set the default to the Bluetooth keyboard the Bluetooth keyboard is NOT shown as an option just the default AOSP keyboard.. Can one of you guys help?? You know what a PIA it is to return anything to China so I just may be stuck with this which sucks because I can't use any of my Google apps (e.g. Gmail) which is why I bought this thing in the first place!
Any and all replies are appreciated!
Chris R.
crodgers79 said:
The problem is that the teeny tiny keyboard is just too hard to navigate and when I try to switch the keyboard from alpha to numeric I get an "Android Framework has stopped" error message and the Google setup/sign-in app crashes and reloads.. Arrrggghh..
I tried installing two different Bluetooth keyboards to get around this problem but when you link the keyboards and go into the settings it will say "Use as input device" great, but when you go into "Languages and Input" to set the default to the Bluetooth keyboard the Bluetooth keyboard is NOT shown as an option just the default AOSP keyboard.. Can one of you guys help?? You know what a PIA it is to return anything to China so I just may be stuck with this which sucks because I can't use any of my Google apps (e.g. Gmail) which is why I bought this thing in the first place!
Any and all replies are appreciated!
Chris R.
Click to expand...
Click to collapse
I have tried to get Bluetooth keyboards and mice to work with two different phones that use this same chipset and Android version. My conclusion is that it is impossible. The devices pair, but the phone does not react to them. It looks like a fundamental bug in this Android release. If anyone has more success, I would certainly want to hear about it.
Your best option would be to install a half-size keyboard like Slidy Press, that has much bigger keys. Of course, installing the official version would require logging into the Play store first Your only option is to download the APK and install it from the file manager. I have made a customized version of Slidy Press available for download. I would post the link here, but for some reason the forum forbids this, so you will have to Google for this exact phrase between quotes: "I recommend installing Slidy Press" and you'll find the download link.
Unfortunately Google Framework Services has stopped
DrLex said:
I have tried to get Bluetooth keyboards and mice to work with two different phones that use this same chipset and Android version. My conclusion is that it is impossible. The devices pair, but the phone does not react to them. It looks like a fundamental bug in this Android release. If anyone has more success, I would certainly want to hear about it.
Your best option would be to install a half-size keyboard like Slidy Press, that has much bigger keys. Of course, installing the official version would require logging into the Play store first Your only option is to download the APK and install it from the file manager. I have made a customized version of Slidy Press available for download. I would post the link here, but for some reason the forum forbids this, so you will have to Google for this exact phrase between quotes: "I recommend installing Slidy Press" and you'll find the download link.
Click to expand...
Click to collapse
Thanks!!! I installed Slidy but I'm now finding that if I touch any key that appears in the lower left corner I get a "Unfortunately Google Framework Services has stopped" error and the app crashes. Any ideas???
Thanks again!!!
Chris R.
crodgers79 said:
Thanks!!! I installed Slidy but I'm now finding that if I touch any key that appears in the lower left corner I get a "Unfortunately Google Framework Services has stopped" error and the app crashes. Any ideas???
Thanks again!!!
Chris R.
Click to expand...
Click to collapse
So, regardless of the keyboard you're using, it always crashes when you touch the lower left key? That is extremely weird. Do you also get strange things when you touch that location without keyboard? Maybe your screen is defective and you'll have to send it back anyhow…
i concur with lex, i've never had this problem despite installing multiple apps on the watch. in your posts you mentioned that the error message first came up when you tried switching from alpha to numeric. and again the message comes up when you touched a key in the lower left. coincidentally, both areas you touched are on the lower left portion of the screen. there might be something wrong with your device/screen. unless of course another app is somehow causing this issue? though somewhat related, i once installed usb toggle in my note 2. though rooted, it seems that my note didn't like the app and frequently crashed. i had to fix it up it to the point of going to the bootloader to wipe out the cache. in any case, uninstalled it and now my note functions well. the same could be for your watch. again, unless of course there's something wrong with your screen/device...in which case you should have the watch replaced.
at first in setting up my wifi connection, playstore id/password, etc..it was quite a burden. though the keyboard is small, you'll eventually get the hang of it. i still get the occassional mistake of pressing the wrong letter. but i rarely do this anymore since the watch has been set up to what i need it to do (which is mostly for gps).
the one thing i'm looking around for is trying to either deactivate or change the watch face. i noticed that this can be done for the sony smartwatch...i'm still trying to find a way for the ik8. no luck at the moment though...
Returning
Guys,
Thanks.. I've done a Factory Reset and the problem persists. I think the digitizer is faulty in that one spot so I'm sending mine back for another.. Will let you know if the next one acts up! Thanks for all of the replies!
Chris R.
IK8 Review
I wrote a review about the IK8 (I think I should be allowed to post links by now). Because I already had a ZGPAX S5 and the IK8 is very similar, the review mostly focuses on the differences between the two. The general conclusion however is that the IK8 is noticeably better in most aspects.
The review also contains a list of tweaks and hacks, and custom versions of the clock screensaver and launcher. Enjoy!
DrLex said:
I wrote a review about the IK8 (I think I should be allowed to post links by now). Because I already had a ZGPAX S5 and the IK8 is very similar, the review mostly focuses on the differences between the two. The general conclusion however is that the IK8 is noticeably better in most aspects.
The review also contains a list of tweaks and hacks, and custom versions of the clock screensaver and launcher. Enjoy!
Click to expand...
Click to collapse
hey lex
thanks for sending that link to your review. I rooted the phone to change the watch face lock screen. I think somewhere along the line I sort of did something wrong because now the lock screen watch won't come up....which is a good thing! what I did was installed ADW Launcher and used a live wallpaper for a nice watch face. I kept the home screen free of any widgets. Swiping to the right then brings up a whole bunch of short cuts and widgets which I use.
cheers
crodgers79 said:
Guys,
Thanks.. I've done a Factory Reset and the problem persists. I think the digitizer is faulty in that one spot so I'm sending mine back for another.. Will let you know if the next one acts up! Thanks for all of the replies!
Chris R.
Click to expand...
Click to collapse
have you tried change the launcher and see if that spot keep faulty, my motoactv had a faulty spot on screen related to massive battery discharge, factory reset didnt work, but the problem was zeam i changed to adw, smooth as silk, i think it woth a shot
GT08 Smart Watch. looks a lot like iWatch hitting aliexpress.. Thoughts?
jiggygent said:
GT08 Smart Watch. looks a lot like iWatch hitting aliexpress.. Thoughts?
Click to expand...
Click to collapse
Agree.... someone needs to buy and review it!
I just ordered one last night. I'll do a review and possibly a video when I receive it.
JoshClarke said:
I just ordered one last night. I'll do a review and possibly a video when I receive it.
Click to expand...
Click to collapse
Have you done the review yet?
janez2001 said:
Have you done the review yet?
Click to expand...
Click to collapse
I haven't received it yet. These things usually take awhile to arrive since they are being shipped from China.
When your GT08 does arrive, I was wondering if you'd be willing to answer a few questions about it for me:
Does it have a compass? I've seen some product descriptions say "yes" and others say "no". (This is a very important feature to me, for no valid reason whatsoever other than it's cool to have a compass on your watch.)
Is it water-resistant? I don't necessarily need to go diving with it, but something that could survive a quick hit by a water faucet would certainly be useful.
How customizable are the watch faces? I know that it comes with several built in, but is there a way to make a custom watch face?
Is it usable WITHOUT a SIM card just over Bluetooth?
Thanks, and let's hope those ePackets have swift wings!
- Dave
I just received it. I will still do a more thorough review, but for now I will answer your questions.
There is no compass. Sorry.
I'm afraid to wash my hands while wearing it. I don't think it would survive.
There are 3 watch faces and they cannot be customized.
It is usable over Bluetooth. A lot of the features require an Android phone, so I cannot test them because I have an iPhone. The phone features work and all audio from the phone (music, voice navigation, etc.) can be routed through the watch.
Keep in mind I've seen multiple versions of this watch, so my answers may not apply. Mine has a mix of iPhone and Android icons. I paid $60, so I can't complain. Video review coming soon.
GT08 review
Just ordered mine. I'm going to make a full review with photos and videos on my blog when I receive it, stay in tune.
JoshClarke said:
I just received it. I will still do a more thorough review, but for now I will answer your questions.
There is no compass. Sorry.
I'm afraid to wash my hands while wearing it. I don't think it would survive.
There are 3 watch faces and they cannot be customized.
It is usable over Bluetooth. A lot of the features require an Android phone, so I cannot test them because I have an iPhone. The phone features work and all audio from the phone (music, voice navigation, etc.) can be routed through the watch.
Keep in mind I've seen multiple versions of this watch, so my answers may not apply. Mine has a mix of iPhone and Android icons. I paid 55.85€ so I can't complain. Video review coming soon.
Click to expand...
Click to collapse
Hello Josh, could you please test phone calls through the watch sim? Thank you
janez2001 said:
Have you done the review yet?
Click to expand...
Click to collapse
Sneak-peak on how it's look like:
youtube.com /watch?v=my439mw5zOA
Has anyone can make a rom dump installation freware to watch if I give this dump rom?
It is called Aiwatch GT08?
This smartwatch costs only €39,99 on the site tidybuying.com
I like this smart watch and price is relatively low.
It has 1.54 inch screen,
ROM 128 MB
RAM 64 MB
and it supports 2G.
Firmware for GT08
Hi
I'm looking for a firmware to download, because my version has only English and
Chinese languages installed.
Thanks
Klaus
I bought the GT08 smart watch today and can't wait till I get it. I noticed that there were lot of different names for the same thing (GT08, CK3s, Oumax S6 etc...) and the screenshots on the watch look slightly different, so there must be different firmwares. Does anyone know if the firmware can be downloaded, edited or flashed in some way? Is it possible to install apps or games on this system? Java apps perhaps? This would be sooo cool :fingers-crossed:
any good review ? please include available watch faces and what do you think of it ? is it worth buying ?
Smartwatch GT08 / CK3s / Oumax S6
Ok I'll try a short review then...
Hardware
The watch arrived today and on the first sight it looked really cool and good quality. It's big of course but not too big and I like the design very much ( seems they 'borrowed' it from the apple watch) . The belt can not be changed because it contains the nfc antenna. This is bad, because the shutter is really annoying and bad quality. You can insert a micro sim card and a TF card into the watch, so it can be used as a phone itself but I didn't try it out. There is a built in camera but it has only 0.3M and the pictures are really crap (sorry for that). The screen ist colorful and bright but its not IPS and the viewing angles are very small, the touchscreen works very good.
Software
The watch has some strange chinese proprietary firmware and not android wear so it is not possible to install any apps. In fact it feels like a litte time warp to the time before devices had android. There is a filemanager and I've copied some java apps to the watch but the system doesn't know what to to with them. Some of the pre-installed apps don't work either. There is a browser (useless because you don't have wlan or 3g) and a FM-Radio which is also useless, because you have to plug in earphones as antenna and the watch simply has no jack für earphoes. One app is a qr-code to download btnotification software for your smartphone, but the code points to a dead link. There is a pedometer that works, but I don't know what it actually does (at least it doesn't count steps) and some other smaller things (alarm, stopwatch, voice recorder, sleep monitor, etc..)
There are only few possibilities for personalisation: 3 (boring) analog watch faces and 3 themes (meaning backgrounds for the menus).
Bluetooh pairing worked well and after I tried some apps from the playstore I got notifications from my smartphone at last. I was able to remote control my smartphone to make and receive calls with the watch and to access the contact list of my phone. I've tried to use a bluetooth headset with the music player but the sound quality ist so very bad, its abolutely useless. So you have to play the music on the tiny built in speaker but who would want that? So the music player ist also useless, which would have been an important feature for me.
my opinion
Don't buy! I will definately return it to the seller, because it is so very not what I wanted.
Ok, it is a cheap watch with benefits and a telephone funktion. The design and built quality is very good for a chinese smartwatch but when it comes to usability, customisation and all day handling there is hardly anything positive to tell. I wanted to post pictures but I didn't understand how. I clicked the icon and was asked to enter some url? Anyway there are some reviews on youtube, just enter one of the names GT08 / CK3s / Oumax S6 which mean all the same device.
the steve said:
Ok I'll try a short review then...
Hardware
The watch arrived today and on the first sight it looked really cool and good quality. It's big of course but not too big and I like the design very much ( seems they 'borrowed' it from the apple watch) . The belt can not be changed because it contains the nfc antenna. This is bad, because the shutter is really annoying and bad quality. You can insert a micro sim card and a TF card into the watch, so it can be used as a phone itself but I didn't try it out. There is a built in camera but it has only 0.3M and the pictures are really crap (sorry for that). The screen ist colorful and bright but its not IPS and the viewing angles are very small, the touchscreen works very good.
Software
The watch has some strange chinese proprietary firmware and not android wear so it is not possible to install any apps. In fact it feels like a litte time warp to the time before devices had android. There is a filemanager and I've copied some java apps to the watch but the system doesn't know what to to with them. Some of the pre-installed apps don't work either. There is a browser (useless because you don't have wlan or 3g) and a FM-Radio which is also useless, because you have to plug in earphones as antenna and the watch simply has no jack für earphoes. One app is a qr-code to download btnotification software for your smartphone, but the code points to a dead link. There is a pedometer that works, but I don't know what it actually does (at least it doesn't count steps) and some other smaller things (alarm, stopwatch, voice recorder, sleep monitor, etc..)
There are only few possibilities for personalisation: 3 (boring) analog watch faces and 3 themes (meaning backgrounds for the menus).
Bluetooh pairing worked well and after I tried some apps from the playstore I got notifications from my smartphone at last. I was able to remote control my smartphone to make and receive calls with the watch and to access the contact list of my phone. I've tried to use a bluetooth headset with the music player but the sound quality ist so very bad, its abolutely useless. So you have to play the music on the tiny built in speaker but who would want that? So the music player ist also useless, which would have been an important feature for me.
my opinion
Don't buy! I will definately return it to the seller, because it is so very not what I wanted.
Ok, it is a cheap watch with benefits and a telephone funktion. The design and built quality is very good for a chinese smartwatch but when it comes to usability, customisation and all day handling there is hardly anything positive to tell. I wanted to post pictures but I didn't understand how. I clicked the icon and was asked to enter some url? Anyway there are some reviews on youtube, just enter one of the names GT08 / CK3s / Oumax S6 which mean all the same device.
Click to expand...
Click to collapse
did you try the mediatek app ? it allows you to some stuff, from playstore. does it look cheap ? I think the bezels are too big for the screen. How much did you get it for ? I have a store here selling it for 68$.
Plus, I have seen it pop a keyboard for typing an SMS, and have a reasonably long battery life. I don't know why you didn't like it. What makes the galaxy Gear 1 for example more special than this ? (forget S-crap)
And did you try having the earphones in THE PHONE, maybe that will make the radio work on the watch, just some thought.
Yes, I used the mediatek app. Thats how I made the notifications work although I had some troubles with it loosing the connection or crashing the app. It was not possible to install anything over the app onto the watch, maybe it is made for other models or firmware. It also didn't look, as if there were lot of possibilities with the app and the app had nothing to do with a playstore.
The watch has the ability to write sms and pops up a small onscreen keyboard. It is really small but can be customized. I didn't say I like the Samsung smartwatches better, I didn't try and it would be too expensive and without a real phone funktion. Maybe it's not yet time for a good and cheap smart watch, using real android. There are some offers from simvalley, but their models look really big and ugly.
Of couse I can put earphones in the phone, but what use will the watch have then? It is possible to stream music via bluetooth from the phone to the watch but not the other way. The fm-radio is a feature of the watch and needs the earphones plugged in the watch as an antenna, otherwise noting will happen. I thought it would be possible to use the watch as musicplayer without the phone, but it doesn't work good with bluetooth headset.
I payed about 60€ for the GT08 from a german seller, but I know there are offers from chinese stores about 35$. For me it was important to have the ability to return it easily if something wasn't right and get my money back then.
I have noticed that another member of this forum (BigBison420) has made a review of the oumax s6 smart watch some time ago which is the same device. for additional information it might be worth reading. I'm sorry I can't post links yet, but I'm just new to this forum.
---------- Post added at 01:24 AM ---------- Previous post was at 01:03 AM ----------
I mentioned in my review that I will send back the GT08 smart watch, because it was not the real thing I was looking for. Now I found a new device which has nearly the same design, a better screen and runs on android (including playstore). It is just called K8 android 4.2 3G smart watch, I don't know if I'm allowed to tell the sellers page (I cannot post links yet). Here some specs:
OS:Android 4.2
CPU: MTK6572 Dual Core 1.0GHz
GPU: Mali-400 MP
RAM+ROM: 512MB+4GB
Bluetooth version: Bluetooth V2.3
Display: 320*320 pixels
Camera: 2.0MP
Support MP3/MP4/GPS/WiFi/3G Function
Compatibility:Compatible with Android smart phones
Notes: Provide E-file English manual
Note: This phone will only work with GSM+WCDMA networks: GSM 850/900/1800/1900MHz WCDMA 850/2100MHz
It looks really promising and seems to be a lot smaller and more beautiful than other android watches with those specs and it'll cost below 100$. I can't wait to get it, but delivery will last about two weeks or more. If anyone is interested, I can do another review, altough I didn't have much practice on that...
Has anyone obtained this apparently little-known watch?
I'm not sure it's made by UWatch, even though some places claim it is, and the model name follows their pattern.
But it has some interesting characteristics that blend the U8, U8 Pro and U10 together:
- it can act as a phone, with a SIM, but only through an additional (included) magnetic "SIM shell" that makes the watch a little thicker; without it, it's very thin, less than 9mm
- a detachable shell is also used for USB charging
- it has a compass like the U10, but maybe no barometer/altimeter like the U8 has, since a seller told me so, even though some specs listing suggest otherwise
- the screen is a whopping 320x320 resolution 1.56" IPS (the U8 is 128x128 TN and the U10 is 240x240)
- the battery is quite large, 360mAh, with a claimed life of 10 days (!)
- the CPU is a newer MTK2502C, though I'm not sure it runs Mediatek's Linkit like some other newer watches (there is no hint that you can install apps)
- of course, there are the usual stopwatch, step counter, sleep monitor, and so on
It is around €55, but it can only be obtained from China, I found no European reseller.
If anyone has it (or has found detailed reviews):
- does it run Linkit? Can Linkit apps be installed (through, for instance, the MediaTek SmartDevice app)?
- does it have motion gestures (for instance, does it turn on when you rotate your wrist towards you)?
- is the battery life up to promises?
- is the software solid or buggy?
- any other highlights?
I ordered one of these after I tried and was pleasantly surpised with an u8 clone(...).
There very basic if you compare them with say samsung gear s2 which runs Android and is over 330€ up here. I would rather use the word "robust". With sandby time of nearly 10 days! Thats standby offcours.
The u8 and u11 seem to use the same Nucleus os.
And though the u11 is better in every aspect it still lacks a animated and interactive notification system that Android smartwatches have.
Nonetheless one can do more with Nucleus devices then meets the eye. Its just not an open os where you can just install apps on the fly. Android devices seem to need more power especialy xburst which runs a fair amount higher in clock.
But Nucleus is also more capable then the current roms used on these smart watches.
I have yet to recieve the u11, but from what I have read it will suffice my needs for the moment.
Though I have to be honest that I do not like the U8's battery life at all. It's just ridiculously short when bluetooth is on all the time. The u11 does come with bt4.0 and the battery is bigger but it also has a faster cpu, uses gsm(if activated) and has a bigger(IPS)and higher res screen. Time will tell what the inpact is on battery life. Not much info is on the net right now.
Anyway, its a nice watch with an original design(..) an better build then the u8. Using metal alloy opossed to plastic for the case, better strap, tweaked interface with two themes, nicer clock faces etc.. and I realy like the modular design to keep the watch slim.
Hopefully someone will tweak and customize some U11 roms here at xda
Found this review(in spanish)
Does anyone have the u11 rom ? I corrupted something on mine by installing an app. Now it's stuck on the clock. Touchscreen works... it still connects to my paired phone but I can't navigate the menus.
Can't help you. I still have to recieve it but
what do you mean with you installed an app?
Benwayqb said:
Does anyone have the u11 rom ? I corrupted something on mine by installing an app. Now it's stuck on the clock. Touchscreen works... it still connects to my paired phone but I can't navigate the menus.
Click to expand...
Click to collapse
ebsbow said:
Can't help you. I still have to recieve it but
what do you mean with you installed an app?
Click to expand...
Click to collapse
Long story short, many notifications did not work. Facebook, Messenger, Gmail to name a few.
I tried different apps on my Galaxy S6 and ended up with a totally incompatible app that tried to install something on the watch and corrupted something.
Thats interresting. Maybe add what app so we dont make
the same mistake again.
Did you try to reset the watch?
I mean reset not restart. There should be small hole
( the one thats not the mic) which you can use to reset the
device by puching a needle gently in there. Just make sure
its not the mic!
Mediatek Smartdevice should work.. ?
It's actually Mediatek Smart Device that messed up my watch.
I didn't find a reset button. Disconnected the battery and reconnected it with still the same result. I left the battery disconnected and I'll try gain in a few days.
I dont think removing the battery will reset the device. Flash ram isn't power dependant.
Maybe the manual can tell where or if there is an reset button?
There is no reset button. I did reset the ram via the Flashtool and I still can't access the menus. The clock did revert back to the default one.
I will need somebody to make a backup of his u11 firmware and post it !
Got mine today. Sadly I ordered Black and gotten a Gray color item. :-/ (don't buy at banggood, they will send random color when there stocks are low) Not to happy.
Anyways.
First impression is good. Metal case, in my case, Gray silver..
Battery wasn' t charged so I could not test it right away
but after a small charge it booted, silently, into clock mode.
The screen is nice at 320p. Clockface is analog which I switched
to digital for no specific reasson. Theres two faces of each, all just fine.
Two themes for menu. Menu is nicely organized with features that
matter easy to access. Much better then the U8 if I may compare.
Notification system is also much better. with a preview of the
sms or other notification that arrives. Longer notifs are clear and cripst to
read on the 320p screen. Which pops on when an notif arrives or when you lift your arm in the right direction. Very usable indeed though shaking would be better.
Every app is nicely tweaked. And the added compass works fine.
Very nice watch and very slim. Obviously adding the gsm module will add a few milimeters. Still have to test this though.
If I get around a pc I will upload the rom for those who want it or just incase. But lets see for an update first.
Misses:
A notif has an menu when swiping from the right. When a large email arrives and you want to access the menu(open, delete, block) the watch may freez.
You dont really need the menu that badly but when it locks, just press the side button for approx. 12 sec. and reboot. No biggy but unfortinute. edit; A long press on an item in the list also pop's upp the menu which works fine.
The vibrator is somewhat to loud. It makes more noice then the alarm sound(in low volume). Sadly no way of turning it down. Turn it off at the cinema or you'll get popcorned!
No Calc! This is a smartwatch, right?
Screen could be a little less bright in the dark. Although a amoled would have been great its a nice ips screen. But a lower setting would be nice.
So did you find a way to make a copy of the firmware?
Thanks
No I have not. I dont have an pc availible. I did try
it on my W10 tablet but W10 isnt beeing very likable.
Can you share the program you used, with drivers, then
I will give it an other try. Also did you use the cable that
came in the box to flash the watch?
My table did not recognize the device. Could be the OTG,
the cable or just plain old W10
I used the cable provided. But I had to use an older laptop running Windows XP. Wouldn't work on my W10 laptop.
I am currently in a moving phaze, so I dont think I can help you right now.
All my stuff is tight up.
Maybe a virtual machine with xp on a w10 tablet/pc will work...
If somebody else can jump in here? I see what I can do here. No promises though.
Benwayqb said:
I used the cable provided. But I had to use an older laptop running Windows XP. Wouldn't work on my W10 laptop.
Click to expand...
Click to collapse
have you found an issue ?
Benwayqb said:
Does anyone have the u11 rom ? I corrupted something on mine by installing an app. Now it's stuck on the clock. Touchscreen works... it still connects to my paired phone but I can't navigate the menus.
Click to expand...
Click to collapse
It seems i have a same issue, only clock menu. depending on chosen clock I can access to call and message fonctions.
Best regards
Hi all.
First of all, I wanted to say hi (I am new to the forum )
I received my Sony XAV-AX1000 head unit yesterday, and wired it up this morning. Looks all perfect (good enough for now, will need to disassemble again to do some tweaks, nevermind). I just wanted to know if there’s a way of changing this boring Sony splash screen (and perhaps a wallpaper) to something better. I know there is a possibility of doing this in an AX100 head unit, however, from what I see, the firmwares do not seem to be compatible. Please help, and thank you in advance.
Same boat, same problems. :/
I’m stuck in the same boat too. I love the head unit I installed already! I just wished there were some options that I could use that were able to be used on the AX100 model. If there is a way to gain access to changing the wallpaper and splash screen on the AX1000 model then that would make my radio perfect for my build!! I hope there is something. I’ll keep my fingers crossed.
bump
Is anyone able to make custom firmware to give access to custom boot image or wallpaper? I would be willing to pay if someone is willing to take this on
I recently switched back to Android and totally forgot this unit only does Carplay. So I'm personally on a quest to fix that.
It seems that the real difference between AX100 and AX1000 is software but that's my guess. I know superdavex has done some work on the AX100 but I'm not nearly skilled enough (or in excess of time) to really dive into this kind of stuff.
However, for anyone who is and is interested, that's perhaps where you'd need to go.
Hi! I got a DZ09 smartwatch and it's missing a lot of stuff. Is there a way to run normal (I efully functional) firmware on the smartwatch? It doesn't seem to support notifications, vxp apps, or remote camera viewing.
I typed in *#3375# into phone app and got
Software V:
MX31D-COB-DZ09-7789-HSD-RQ-GL6113-ZH-V06.929-20190327
Also if anyone has the software to edit firmware or the MRE SDK, let me know bc I can't find it
I tried to do what your attempting here, but there are "geniune" dz09s, "fake" dz09s and many more, with different chipsets and different firmwares, despite all looking the same. I tried to find a firmware for mine, which was apparently a "fake" one, but couldnt. So i didnt get any further than that. Make sure to check which processor your watch has, you can do this by opening the back cover, removing the battery and then removing the back screws to remove the plastic bracket. Now you will be exposed to the motherboard, one of the chips on the board will be a mediatek one (the processor), read which one it is off of the label. I suggest doing it physically rather than through software as software can be faked to show a superior model.
I may be able to do that tomorrow but this is the model if it helps https://www.walmart.com/ip/Wintekd-...ports-Run-GSM-GPRS-SIM-4-Color-Gold/379234992
Also in the menu u get hy entering *#3646633# it says
<CHIP TYPE>
SC6531BA
apparently there's posts on here involving a DZ09 that has that chip
Again, you're on your own with this one. Maybe someone else will come round t ohelp, but I highly doubt that.
So far I found a lot of stuff from hardware version in that menu: SC6531_BAR
I'm not sure about custom firmware yet tho
Um any1 help.
I've got a fake dz09 too . It doesn't boot or charge. I mean. It does charge. But when it's on portable battery it keeps disconnecting and connecting. I have a electricity meter. When I put it in the battery pins, when the portable battery starts charging it gives for half a second a wave of electricity. Help?