Hi Guys,
My Girlfriend phone got stuck on a black screen with only notification sensor on the top working. She was running Batman Rom 1.5 with the latest bootloader and modem and the rom stock kerel. That happened after I flashed this Dolby ATMOS. After I flashed Dolby ATMOS zip the phone booted and it was working for 2-3min and then it rebooted I only saw the Samsung logo and right now is stuck. So far I tried:
Power+Volume Up
Power+ Volume Down
Power+ Home
Power+ Home+ Volume Down
All Keys at the same time
I also tried them while the phone is charging and connecting it to my PC but no luck there. The warranty recently expired so that's is not an option anymore.
I'm open to any kind of suggestions.
Hold Power + Home + Volume Down key 7second.
It will reboot device, but if fail, You need use Download mode. (.. or wait out of battery )
Reboot and Power + Home + Volume Up key.
Gureumi said:
Hold Power + Home + Volume Down key 7second.
It will reboot device, but if fail, You need use Download mode. (.. or wait out of battery )
Reboot and Power + Home + Volume Up key.
Click to expand...
Click to collapse
It's working now!
I left it overnight to drain the battery and in the morning I plug it in and it starts charging. Afterward, I had to roll back to her back up and for now, everything is working.
Thank you for the help!
Related
Hi,
I flashed TWRP and CM 10.1 but then I got problems with the phone not charging (still having that issue but will post it in another thread). Anyhow I decided to reflash the the stock rom and during the flash the phone randomly restarted. Luckily for me I was able to boot up and everything is working fine. the only problem is i can now longer access my system recovery (power and vol down) or fastboot mode (power and vol up). When trying power and vol down the phone starts up as normal. when trying power and vol up the phone vibrates, the bottom 3 keys light up and then nothing. I have to then hold down the power button to turn the phone off and back on. I hope someone can help me troubleshoot this as I have no idea what to do.
Many Thanks!
Mo
mo123456789 said:
Hi,
I flashed TWRP and CM 10.1 but then I got problems with the phone not charging (still having that issue but will post it in another thread). Anyhow I decided to reflash the the stock rom and during the flash the phone randomly restarted. Luckily for me I was able to boot up and everything is working fine. the only problem is i can now longer access my system recovery (power and vol down) or fastboot mode (power and vol up). When trying power and vol down the phone starts up as normal. when trying power and vol up the phone vibrates, the bottom 3 keys light up and then nothing. I have to then hold down the power button to turn the phone off and back on. I hope someone can help me troubleshoot this as I have no idea what to do.
Many Thanks!
Mo
Click to expand...
Click to collapse
Recovery is accessed by volume up, volume down, and power held down simultaneously for approximately 10 seconds or until you see recovery. Not sure about fastboot. Have you tried to see if your in fastboot by using adb and checking for fastboot devices. You may be getting fastboot mode. I forget if it actually said anything on the screen. Good luck!
mo123456789 said:
Hi,
I flashed TWRP and CM 10.1 but then I got problems with the phone not charging (still having that issue but will post it in another thread). Anyhow I decided to reflash the the stock rom and during the flash the phone randomly restarted. Luckily for me I was able to boot up and everything is working fine. the only problem is i can now longer access my system recovery (power and vol down) or fastboot mode (power and vol up). When trying power and vol down the phone starts up as normal. when trying power and vol up the phone vibrates, the bottom 3 keys light up and then nothing. I have to then hold down the power button to turn the phone off and back on. I hope someone can help me troubleshoot this as I have no idea what to do.
Many Thanks!
Mo
Click to expand...
Click to collapse
Try search for a app called Quick Boot on play market.
Recently tried to flash a new bootloader and modem in my S7 Edge through Odin, but now the screen is stuck in the Powered By Android initial boot screen. I cannot turn it off by using the power button, the only thing that works is if I press the power button + volume down, however that does not take me to the Download Mode but instead just restarts the phone and back into the Powered By Android screen. Volume Up + Power does not seem to be working.
Am getting desperate now, please help!
WillAce13 said:
Recently tried to flash a new bootloader and modem in my S7 Edge through Odin, but now the screen is stuck in the Powered By Android initial boot screen. I cannot turn it off by using the power button, the only thing that works is if I press the power button + volume down, however that does not take me to the Download Mode but instead just restarts the phone and back into the Powered By Android screen. Volume Up + Power does not seem to be working.
Am getting desperate now, please help!
Click to expand...
Click to collapse
Managed to fix it
What I did was keep holding volume down + menu button + power without letting go. It rebooted into the Powered by Android many times but after about 3-5 minutes of holding it straight it finally sent me to the download mode where I was able to install stock S7 Rom.
WillAce13 said:
Managed to fix it
What I did was keep holding volume down + menu button + power without letting go. It rebooted into the Powered by Android many times but after about 3-5 minutes of holding it straight it finally sent me to the download mode where I was able to install stock S7 Rom.
Click to expand...
Click to collapse
Im having the same issues, Did you install it via odin? also was the data on your phone wiped?
sajjid_9 said:
Im having the same issues, Did you install it via odin? also was the data on your phone wiped?
Click to expand...
Click to collapse
yes, you should do it with odin
I need help please .
I tried flashing a stock room with Odin , and did everything like I should. It did finish at the 'downloading' screen but it turned off, and now I can't turn it on.
I tried pressing volume down + power button, volume down + home + power, volume up + power, volume up + home + power none of them worked. also when I connect the phone to my PC or charge , nothing has changed
What should I do?
some people says to me that the boot loader is broken ?
I need help please .
who can do to recover the boot
Hi, after flashing Magisk and TWRP recovery.img then install with Odin everything gone well. But when I want to restart to go in TWRP to install ... bootloop, tryied to start download mode with bixby + volume down or BIXBY + POWER + VOL UP and hold vol UP but nothing work. It bootloops on the first screen of boot, any help please ?
Thanks you
Up ! No one have an idea, really ? :/
Odin dont recognize the phone while it bootlooping, using original cable on usb 2.0
Did you try this?
Here’s how to enter Safe Mode on a Galaxy S10 smartphone:
Shut down your Galaxy S10 smartphone
Hold the Power button key and release it when the SAMSUNG logo appears on the display
Right afterward, press and hold the Volume Down button
Hold the Volume Down button until the device boots up, and the Safe Mode text appears in the bottom left corner
n33 said:
Did you try this?
Here’s how to enter Safe Mode on a Galaxy S10 smartphone:
Shut down your Galaxy S10 smartphone
Hold the Power button key and release it when the SAMSUNG logo appears on the display
Right afterward, press and hold the Volume Down button
Hold the Volume Down button until the device boots up, and the Safe Mode text appears in the bottom left corner
Click to expand...
Click to collapse
Finally some help ! First : THANKS YOU ! I've been all around the web to find help ...
I just tryied this but, it just reboot ... again and again (I cant shut it down so tryied when it was rebooting) other tips ?
I have tryied Odin, ADB and Samsung 300K tool and none is detecting the phone
- Recovery mode (BIXBY + POWER + VOL UP then Hold VOL UP) : not working
- Download mode (BIXBY + POWER then plug usb) : not working
- Safe mode (Power then VOL DOWN on logo) : not working
- Power then VOL UP + VOL DOWN : not working
Phone still reboot again and again and cant shut down
Maybe you should drain the battery,and then try again. I have had the same problem as you. Dont give up its not dead
n33 said:
Maybe you should drain the battery,and then try again. I have had the same problem as you. Dont give up its not dead
Click to expand...
Click to collapse
And when the battery is empty what should I do ?
Put it in download mode. Hold bixby, volume up and power, plug in type c connector, and then usb to pc. You should be in download mode now
Player04 said:
Put it in download mode. Hold bixby, volume up and power, plug in type c connector, and then usb to pc. You should be in download mode now
Click to expand...
Click to collapse
When the battery will be empty u mean ?
After 100x reboots , I finally passed to get download mode idk how (just spammed buttons ...) and reinstalled stock rom, will never try again to install this twrp anymore
Is there fix to connect my phone to pc and recovery my data, i have boot loop, can get recovery with power and up and download mode with + - volume. How to make my pc detect my phone, i use stock rom
Attempted to flash
[ROM][11.0][UNOFFICIAL] Nexus Stock for 2019 Galaxy Tab A 10.1 [SM-T510]
using TWRP and it rebooted to the G but wouldn't load.... restart and now I'm in a FOREVER bootloop:
Ideas? I've tried holding Power + Vol Up, Power + Vol Dwn, Power+Vol Up+Vol Dwn, connecting to computer for adb which doesnt see any devices so I can't force into recovery... ANY help would be great!
Can you go in the Download Mode?
Nope.... I actually got it fixed LOL.... I had to remove the back, disconnect the battery... hold the vol + and vol - plug battery back in and then attach to computer to power on... THAT put me in download mode to fix..... but trying it without disconnecting the battery... it wouldn't shut down, I could hold the power button for a week and it just kept going through the loop