Hi, got my OEM disabled, restarted phone, couldn't do so. Basic story. Tried the Emergency Software Recovery via Kies 3 and Smart Switch, but the problem is the blue screen with triangle keeps blinking and the phone plugging/unplugging. Since that's been so, I can't finish the process properly. Any idea how to prevent it from blinking? I can get an access to bootloader only for a sec, then it proceeds to the triangle screen.
Related
1 year old S8 unlocked (SM-G950U1), stock software. Was running slow today, so I rebooted, and it now crashes almost instantly after showing "galaxy s8" on the boot screen, and just sits there with a slow blinking blue light.
Hard reboot just does the same thing. It won't go into recovery mode. I CAN get into software upload, so I tried flashing stock ROM back with Odin, but that fails, and now I get the "an error has occurred while updating the device software" error. Samsung Smart Switch isn't recognizing it as a supported device.
Can't get TWRP to install because FRP lock is on (and since I can't boot the phone, I don't think I can disable this).
So, am I stuck with a fancy brick?
8
abt12 said:
1 year old S8 unlocked (SM-G950U1), stock software. Was running slow today, so I rebooted, and it now crashes almost instantly after showing "galaxy s8" on the boot screen, and just sits there with a slow blinking blue light.
Hard reboot just does the same thing. It won't go into recovery mode. I CAN get into software upload, so I tried flashing stock ROM back with Odin, but that fails, and now I get the "an error has occurred while updating the device software" error. Samsung Smart Switch isn't recognizing it as a supported device.
Can't get TWRP to install because FRP lock is on (and since I can't boot the phone, I don't think I can disable this).
So, am I stuck with a fancy brick?
Click to expand...
Click to collapse
No twrp for this device. You are probably flashing the wrong revision firmware. You need to flash equal to or greater than what's on the device
Also that same screen of error you can flash in Odin
Hi Guys
I used Odin to reflash my Galaxy S10+ dual sim (duos) as it was experiencing some slowness. I used the Singapore firmware as it uses the same "G975FXXU1ASBA" model name.
The process completed successfully but when the phone boots, it gets past the Samsung logo screen and then gets stuck on a blank black screen with "Starting Android..." showing in the middle. I can swipe down from the top to show the toolbar, but it is limited in what I can select from it and the phone doesn't get to the point where the home screen boots.
I'm guessing this could be an app optimization process but after 4 hours, it was still on this screen.
I've tried re-flashing (redownloading the firmware files), clearing the cache and rebooting the phone.
Does anyone have any ideas?
In case you do want to start clean anyway, have you tried doing a reset in the recovery menu (where you are wiping the cache)? This will wipe all data.
I may have to try the full wipe, which is something I wanted to avoid but seems I have no choice.
Hopefully that at least solves the problem.
I have the same problem but I cannot get it to boot into recovery or download mode. I was flashing Magisk at the time. Odin said it worked but now it wont pass the initial stating android... Odin detects the phone but can talk to it. ADB does not even detect the phone. Phone power and reset come on. if i hold both volume the assistant comes on and if i hold bixby the safemode tag appears in the bottom corner but it still wont boot past Starting Android or boot into download mode
I tried to root my device trough odin. Odin said it was succesful, but when i turned on my device it said someehing like 'vertification failed, you have to reset your device'. So i tapped the button 'reset'. Then my phone restarted and its now stuck on a boot loop with the 'erasing' screen. It just goes to a blue screen with the android logo and beneath it it says 'erasing'. Then after a few seconds, it restarts and turns back to the screen again.
I cannot get into recovery mode, because you'd have to do it with the power button, volume and bixby button, but the second i try to do that, it just restarts and starts the loop again. Even when my phone stopped with the bootloop and just shut down, when I hold my power button it just restarts the boot loop... I already let the battery drain but then still, it just happens again.
I can only get into download mode, but thats all. I dont know my build number. I already looked at the box my phone came in when i ordered it, but all I could find was:
- an IMEI code
- an S/N code.
- a long code existing of numnbers only.
None of these codes I think were build numbers, only the S/N code contained letters.
So I dont think i have my build number. I cant get into recovery mode since it just starts the bootloop.
Please help
My phone is a samsung galaxy sm-g950f
I hope my phone isnt bricked and this can be fixed.
hi did you find a fix? I have the same issue
Hi guys!
I've read tons of threads and guides on Google but nothing helped me to bring to life my Samsung Galaxy S8 Plus. After hours and hours of test and probes I surrender!
Basically I was using normally my phone and suddenly has power off and showing the Samsung Galaxy Logo continuously. I've force reboot it with vol down+pwr button and after some minutes restart normally again. After 5min again the boot loop and stuck there. Tried again to power it off but didn't work so I thought was the battery (because is 3yrs old with heavy use and months ago I had the screen flickering and a battery drain to zero). I opened the phone, unplug the battery and the power button (because I thought was the power button stucked as on my father phone). So after mounted all the stuff in their place I tried to boot it and suddenly start to work again! I've backup all my things rapidly but again power off by himself and this is the last time I see it working.
So I tried to empty the cache entering in the recovery but it was useless so the only way seems flashing the original FW with Odin. Downloaded the right one with Frija, upload the rights files in Odin (Home_csc because I don't want to lose my internal memory stuff) and the phone automatically reboots, pass the Samsung logo and go in Upgrading mode with the blue android screen and a % increasing. After that by himself power off and nothing happen.
I read some stuff about my possibilities to recover it without losing data but a lot of tutorial talk about entering in recovery but I cannot do it! Simply does not go in recovery with vol_up+bixby+pwr_button even after force shutdown it with vol_down+pwr_button or reattach the battery. The only thing I'm allowed to do is put it in Download Mode to be recognized by Odin.
I've tried to launch ADB devices but it is not visible in Download Mode.
I've tried to flash another firmware for the same model (theoretically my one is unbranded italian) but I tried with WIND one because in download mode there is a text "Carried_ID:WIND" but this FW Odin fail to upload it.
I've tried to flash the TWRP with Odin but fails on the phone with error "Custom binary(recovery) blocked by FRP Lock". I've searched how to unlock it but without have access to recovery or phone settings seems impossible. And this phone has also OEM Lock.
I've tried again to flash the FW but the only difference than before was the blue android robot with stucked text "Installing system update", "Erasing" , "yellow advice notice" and finally a green screen with "An error has occurred while updating the device software.Use the Emergency recovery function in the Smart Switch PC Software". And yes, I already tried with Smart Switch but the program does not detect the phone.
I've also tried to flash the original recovery but nothing change.
Seems that my devices is bricked or a kind of boot loop.
In my situation there is something that I can do to recover the internal memory data? I don't tried to flash the FW with CSC file because I don't want to erase all the data.
My Galaxy was original since the purchasing, no root or flashed a FW, only OTA updates.
I've attached a photo with the stuff that appear in Download mode.
After the most recent update, the phone got stuck in a loop with a message ‘Your phone is encrypted, enter your PIN’. Entering your PIN showed the lock opening but it took you back to the same screen. I tried to boot it in safe mode and it was showing a message ‘Optimizing apps’ and then it went black and died. It won’t turn on in any way even in a recovery mode. Connecting to a PC shows the Qualcomm as a device but doesn’t recognize it as a phone.